Search Results

Search found 16560 results on 663 pages for 'far'.

Page 428/663 | < Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >

  • Tidy up old Windows Server Backup snapshots

    - by dty
    Hi, I'm running wbadmin from a scheduled job, backing up my C: and D: drives to my E: and (I believe!) including the system state: wbadmin start backup -backuptarget:e: -include:c:,d: -allCritical -noVerify -quiet I'd like to delete old backups, but I'm concerned that all the information I can find says to use wbadmin to delete old system state backups, and vssadmin to delete other backups. As far as I know, my backups ARE system state backups, but are using VSS on E: for storage, so I'm worried about trying either of these techniques for fear of losing all my backups. This is a home network, so I don't have a spare server to test this on. I'm also happy to simply restrict the space used on E:, but I can't make sense of the difference between the /for and /on parameters of the relevant vssadmin command. For reference, here's the output of vssadmin show shadows: Contents of shadow copy set ID: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} Contained 1 shadow copies at creation time: 07/01/2011 08:12:05 Shadow Copy ID: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} Original Volume: (E:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy83 Originating Machine: x.y.com Service Machine: x.y.com Provider: 'Microsoft Software Shadow Copy provider 1.0' Type: DataVolumeRollback Attributes: Persistent, No auto release, No writers, Differential [... repeated a lot...] vssadmin show shadowstorage: Shadow Copy Storage association For volume: (C:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Storage volume: (C:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Used Shadow Copy Storage space: 0 B Allocated Shadow Copy Storage space: 0 B Maximum Shadow Copy Storage space: 5.859 GB Shadow Copy Storage association For volume: (D:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Storage volume: (D:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Used Shadow Copy Storage space: 0 B Allocated Shadow Copy Storage space: 0 B Maximum Shadow Copy Storage space: 40.317 GB Shadow Copy Storage association For volume: (E:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Storage volume: (E:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Used Shadow Copy Storage space: 168.284 GB Allocated Shadow Copy Storage space: 171.15 GB Maximum Shadow Copy Storage space: UNBOUNDED wbadmin get versions: Backup time: 07/01/2011 03:00 Backup target: 1394/USB Disk labeled xxxxxxxxx(E:) Version identifier: 01/07/2011-03:00 Can Recover: Volume(s), File(s), Application(s), Bare Metal Recovery, System State [... repeated a lot...]

    Read the article

  • Change Windows Authentication user for Sql Server Management Studio

    - by Asmor
    We're using Sql Server 2005 with Windows Authentication setup. So normally, when you log in using e.g. Sql Server Management Studio, it forces you to log in at MACHINE_NAME\Username. Anyways, on this one particular computer, the person said they had to make a new account called User01 to do something and showed me where she'd created it under security in the "master" system database. And so now when she logs in, it's listed as MACHINE_NAME\User01 (not the actual Windows user name). It's still set to Windows Authentication, though, and I'm unable to change the login name. Now here's where the real problem comes in... I didn't realize that she was being logged in under this user name at the time, and I disabled it to see what would happen. Now I can't log into the server under her account. I created a new account in Windows called test, and as expected SSMS had the username as MACHINE_NAME\test, and I was able to log in fine. However, the area where the User01 account was listed is not visible to me as far as I can tell and so I can't reenable it. I also tried running the following query: alter login User01 ENABLE And got this error: Msg 15151, Level 16, State 1, Line 1 Cannot alter the login 'User01', because it does not exist or you do not have permission. So in a nutshell, ideally I'd like to reenable User01 somehow, just to get things back to where they used to be. Failing that, how can I force SSMS to log in using the Windows account name as it should be, rather than trying to use User01?

    Read the article

  • Tomcat Custom MBean

    - by Darran
    Does anyone know how to deploy a custom MBean to Tomcat? So far I`ve found this http://www.junlu.com/list/3/8871.html. I copied my jar with my MBean to Tomcat lib directory so the Custom class loader should pick it up. I then followed the instructions but I kept getting the exception below. My MBean does definitely have a public constructor. If I removed the jar from the tomcat lib directory I get the same message which suggests its not picking up my jar or my jar is being loaded after the Apache MBean Modeler is running in Tomcat. 06-Aug-2010 12:14:23 org.apache.tomcat.util.modeler.modules.MbeansSource execute SEVERE: Error creating mbean Bean:type=Bean javax.management.NotCompliantMBeanException: MBean class must have public constructor at com.sun.jmx.mbeanserver.Introspector.testCreation(Introspector.java:127) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.createMBean(DefaultMBeanServerInterceptor.java:2 at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.createMBean(DefaultMBeanServerInterceptor.java:1 at com.sun.jmx.mbeanserver.JmxMBeanServer.createMBean(JmxMBeanServer.java:393) at org.apache.tomcat.util.modeler.modules.MbeansSource.execute(MbeansSource.java:207) at org.apache.tomcat.util.modeler.modules.MbeansSource.load(MbeansSource.java:137) at org.apache.catalina.core.StandardEngine.readEngineMbeans(StandardEngine.java:517) at org.apache.catalina.core.StandardEngine.init(StandardEngine.java:321) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:411) at org.apache.catalina.core.StandardService.start(StandardService.java:519) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414)

    Read the article

  • Pin the Dock to the top

    - by Chris Buchholz
    I wonder if it is possible to pin the Mac OS X Dock to the top in Snow Leopard? I see lets of ideas on how to do this when I google for it, and Secrets (the tweaking app) also provide it as an option, but I don't see any of the ways working for me. I guess it must have worked at some point, since people said it did, but I believe this feature might have been removed from Snow Leopard, and therefore does not work for me. Is this so? Is there really no way to pin the Dock to the top of screen? If not, what ways of "getting rid of the dock" can you guys recommend? I have tried with auto-hiding, but my problem is that this will leave a 4px line at the edge of where the Dock is pinned to, that applications wont cover. Thats not ideal for me. As far as I have understood from googling, this line will not appear if the Dock is pinned to the top, hence my question. What other ways do you guys use to get rid of it?

    Read the article

  • Disabling Laptop (PB TJ-75) faulty card reader Linux

    - by Gab
    My problem comes from that my laptop [PB TJ-75] has a faulty Alcor card reader. It’s 100% sure, the device is dead and unusable whatever the OS is. It cannot be disabled in BIOS [latest: Vendor: Phoenix Technologies LTD Version: V1.26 Release Date: 05/04/2010]. If I could take it apart from the main board easily, and if with that, the system would never look again for it, I’ll be very happy! Is it possible, has anyone ever tried this? Or maybe, replacing the BIOS with a more open one, which let you disable the card reader. Does this exists? Here's what I've tried to disable it so far. In Win7, I choose ‘disable’ in device manager and that’s ok. If not, the device keeps on appearing and disappearing and lot of resources are used. In Lubuntu 13.04, I got extra boot time, with the msg:'sdb, assuming drive cache, etc.’ I tried other distros (isos booted by grub). I can boot Puppy, Gparted, and Redobackup apparently without any problem. I cannot boot Debian, live or install + tried Crunchbang and Tails. I got a loop :’usb device, scsi n+1 blabla‘. I tried "nousb", no result, I have blacklisted EHCI, no result, then usb_storage module, better boot time in Lubuntu, with just the message "...data transfer failed", better shutdown time too. But, no way to use usb storage medias. In Debian, it ends with BusyBox prompt. Is it possible to just disable that Alcor card reader? Does it have a specific module? Is there a special kernel boot option that I missed? Does it have something to do with kernel recompiling, and if yes, how to do with isos? Programming a driver which says everything is ok (out of my comprehension for the moment)? Disabling device by vendor id? What is the best way?

    Read the article

  • How to best convert a fully encrypted drive into a Virtual Machine?

    - by SiegeX
    I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

    Read the article

  • How can I cause Task Scheduler to "fail" if a dialog box returns a certain result?

    - by Roger
    I'm working on a VBScript to do a weekly reboot of all machines on our network. I want to run this script via Task Scheduler. The script runs at 3:00 AM, but there is a small chance that users may still be on the network at that time, and I need to give them the option to terminate the reboot. If they do so, I would like the reboot to occur the next night at 3:00 AM. I've set Task Scheduler up to repeat in this way. So far, so good. The problem is that if the user selects "Cancel" in my script, the Task Scheduler does not see my task as failed, and won't run it again the next night. Any ideas? Can I pass an errorcode to task scheduler or otherwise abort the task via VBScript? My code is below: Option Explicit Dim objShell, intShutdown Dim strShutdown, strAbort ' -r = restart, -t 600 = 10 minutes, -f = force programs to close strShutdown = "shutdown.exe -r -t 600 -f" set objShell = CreateObject("WScript.Shell") objShell.Run strShutdown, 0, false 'go to sleep so message box appears on top WScript.Sleep 100 ' Input Box to abort shutdown intShutdown = (MsgBox("Computer will restart in 10 minutes. Do you want to cancel computer restart?",vbYesNo+vbExclamation+vbApplicationModal,"Cancel Restart")) If intShutdown = vbYes Then ' Abort Shutdown strAbort = "shutdown.exe -a" set objShell = CreateObject("WScript.Shell") objShell.Run strAbort, 0, false End if Wscript.Quit Appreciate any thoughts.

    Read the article

  • Problem with network after malware attack

    - by Cruelio
    Im trying to help some friends with a Win XP machine. I got rid of the malware using Malware Bytes, and HiJackThis. But now they(I) have another problem. When the computer boot into Windows it seems fine. When I start Internet Explorer the browser window opens just fine, but nothing happens for at minute or two. After the two minutes of waiting, the network icon appears in the taskbar next to the clock, and then everything works. The computer is connected to the internet using a Ethernet adapter. I have looked at the Rvent Log and found an error from Perfnet with eventid 2004 <Provider Name="PerfNet" /> <EventID Qualifiers="49152">2004</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> What I have tried so far: In the device manager i have uninstalled the Ethernet adapter and installed it again. I have uninstalled and installed the Windows File and Printer Sharing service. I have verified that both server and workstation services are started. What should I do next?

    Read the article

  • What steps should I take to debug this non-starting hvm virtual machine?

    - by Ophidian
    I have a dom0 machine running CentOS 5.4 with all the latest updates using Xen as my hypervisor. I am using Xen in part because this machine was set up prior to KVM being included in RHEL, and in part because KVM's network bridging configuration is not nearly as simple as Xen's. The dom0 machine is headless and I do all of my VM management via virsh from the command line. I have two hvm domU's: A web server running CentOS 5.4 A mail server running Gentoo Both VM's are backed by LV's on the dom0 but do not use LVM in the domU. Both have virtually identical libvirt configurations (differing by expected things like name, UUID, NIC MAC, VNC port, etc). The web server domU (WSdomU hereafter) does not start since applying the most recent kernel update (kernel-xen-2.6.18-164.15.1.el5.x86_64 and kernel-2.6.18-164.15.1.el5.x86_64 for the dom0 and WSdomU respectively). By 'not start' I mean it appears to be running but it does not use an CPU cycles, does not bring up a graphical console, and does not respond on the network. The WSdomU is listed as no state rather than the normal running or blocked in xentop. The mail server domU starts fine and functions normally. Here are the steps I have taken so far that did not solve the problem: Reboot the dom0 to see if things come up on their own Check xen dmesg on dom0 Check xend logs (a cursory viewing did not show anything blatant; specific suggestions of things to look for would be appreciated) Attempted to connect to the WSdomU's graphical (VNC) console from the dom0 Shutdown the mail server domU and attempt to start the WSdomU Check the SELinux labels on backing LV's (they're the same) Set SELinux to permissive and attempt to start the WSdomU Use virsh edit to try tweaking the WSdomU config virsh undefine, reboot, virsh define the WSdomU config dd the WSdomU LV to an .img file, copy it to my Fedora desktop and run it under KVM (works fine) What steps should I take next to debug this? I will edit in any additional configuration's requested in the comments.

    Read the article

  • hdfs configuration

    - by Ananymous
    I am a newbie. Trying to setup a hdfs system to serve my data (I don't plan to use mapreduce) at my lab. So far I have read, cluster setup in but I am still confused. Several questions: Do I need to have a secondary namenode? There are 2 files, masters and slaves. Do I really need these 2 files eventhough I just want hdfs? If I need them, what should go in there? I assume my namenode in masters and datanodes as slaves? Do I need slaves nodes What configuration files are needed for namenode, secondary namenode, datanode and client? (I assume core-site.xml is needed for all 4)? In addition, can someone suggest a good configuration model? sample configuration for namenode, secondary namenode, datanode, and the client would be very helpful. I am getting confused because it seems most of the documentation assumes I want to use map-reduce which isn't the case.

    Read the article

  • Win 2003 SBS - secure enough by default?

    - by Pekka
    I have to set up a Windows 2003 Small Business Server to work as a Subversion repository and possibly as an E-Mail server later. The machine is a virtual one, hosted with a hosting company, and freshly initialized. I used the Security Configuration Wizard to deactivate all server roles. After I install Subversion, I will open the necessary ports for the service; in addition, obviously, RDP will stay open so I can remote control the machine. Automatic updates are activated, and I will set up E-Mail notification every time somebody logs on to the server. I'm a programmer and not a professional systems administrator, so I would like to know whether you would regard this a sane and secure setup for a (publicly available) box to host sensitive code and/or E-Mail on. Is there anything in addition I should do to make the machine secure? Is there anything I can do on a long-term basis to keep the machine secure, apart from monitoring the event log (as far as I can make sense out of it), and seeing that any hotfixes are installed properly?

    Read the article

  • Notebook Operating System with extreme support cycles/security updates

    - by leto
    Hello there, after reading the announcements about Mac OS X "Lion" and Apples political decision, I've had enough. I'm a longtime Apple User since 1992, have always felt at home there, but am trying to switch to alternative Operating System since a year. I've also been working with Unix machines since 2001, so I'm looking in one of the free Unices or a Linux. Since I last looked at the desktop in 2002 choke much has changed, it seems. So I'm lost once more in the war between desktop environments and software. To be honest: I don't care what it's name is, I want to get my job done. Here's what I set me as landmark for an operating system/software to be considered: Has to be atleast four years old Has to supply security updates for current release for atleast a year Production quality stability for the whole desktop environment (!) No f****g commercial stuff that tends to supply me with privacy invading App Store or Cloud space So far I'm running a MacBook from 2007, 4 Gig memory, 250 Gig disk and I need: IMAPs for Mail since 1995 Webbrowser sic Shell Keeping current with Updates/Upgrades with no more than 5 Minutes spent in entering commands (makes it hard for OpenBSD ;-) ) A desktop filemanger would be nice, but is a bonus. What can you suggest as operating system? The one with the longest support cycles and best chance to survive the next 10 years will win a new user, even sending patches when needed :-) Greets

    Read the article

  • Nginx and automatic updates

    - by Desmond Hume
    I'm on Ubuntu 12.04.1 with unattended-upgrades configured for automatic security updates, and I installed Nginx by first adding deb http://nginx.org/packages/ubuntu/ lucid nginx deb-src http://nginx.org/packages/ubuntu/ lucid nginx to /etc/apt/sources.list file, just as was suggested by the official wiki, and then by sudo apt-get update sudo apt-get install nginx which installed Nginx with all the standard modules. But now I think I could make good use of one or two of the Nginx optional modules, like the gzip precompression module or some security-related one. So far, I see two ways of adding an optional module to Nginx, one is compiling and installing from the source code and the other is described in this article. So, which of the ways should I choose so that automatic updates still run for and apply to Nginx and its optional modules? Or should I create a cron job with a command/script specific for Nginx instead of using unattended-upgrades utility? Can I choose between volume updates and security-only updates to be automatically applied to the standard and optional modules? And finally, is there a possibility to automatically update Nginx's modules on the fly (without any connections having been dropped), like the documentation suggests it's possible with sudo kill -USR2 $( cat /run/nginx.pid ) P.S. Actually I'm not certain if unattended-upgrades utility would automatically update the standard modules in the first place, not enough time has passed since Nginx was installed to say for sure.

    Read the article

  • replacing the default console emulator under Windows XP

    - by Gilles
    How can I replace the default program providing console windows under Windows XP? I know of alternative programs, and I have a shortcut to start cmd.exe in Console2. But now I want console applications to start in Console2 rather than the default console program, even when I have no control over the program that starts the console application. (I.e. a non-console program starts consoleapp.exe, and I can't change it to start Console2 instead, but I still want the application to be started inside a new instance of Console2.) (Note that I want to replace the console itself, that is, the window in which console (i.e. text mode) applications run. And I must be able to run arbitrary, unmodified console applications: a substitute for a specific console program such as Cmd won't do me any good.) EDIT: So what I'm after is a CSRSS replacement, which leads to OT: I want to know when Microsoft is going to make a decent CSRSS replacement. Not being able to adjust the width of a "terminal" by resizing the window is a complete joke. Go download the ISE already. (It's included in Win7/2008R2.) But as far as I understand this ISE is an environment for Powershell, not a general console emulator.

    Read the article

  • Failing Windows Updates with Error Code 800719e4

    - by Kev
    On a number of Vista machines I have now come across the same error - when installing updates everything works fine, until it after it reboots and the rolls back during step 3. On all occasions (where a simple retry hasn't worked) the error code has been 800719e4. On my own laptop I have so far tried the following:- Installed the updates one by one manually - I started on the smallest and one by one have worked towards the largest one which has left me with "Security Update for Windows (KB2286198)" that refuses to install. Renamed all the files in "C:\Windows\Logs\CBS" to "xxx.old" where xxx was the original name with windows update turned off - no change Renamed all the folders in "C:\Windows\SoftwareDistribution" in the same manner - no change Attempted to install it manually "Windows6.0-KB2286198-x86.msu" - no change Tried to un-install IE8 - doesn't work, rolls back at the end (Installing the IE9 Beta when it launched was what alerted me to the issue on this laptop) Ran a "Fix It" thing from the Microsoft Website - no help (Can't find the link now). Tried to recover from the disk - but alas my laptop only has a recovery partition (and was unservice packed original). Ran with nothing running on startup, and only MS services - again no change. Google is being useless with a load of posts trying to get me to call a telephone number with letters in (presumably an American number) The error code appears to mean error log full but no one has any idea which log! The WinUpdate log does indicate the following is the error point though :- 2010-10-23 13:54:48:230 1240 738 Handler WARNING: Got extended error: "POQ Operation SetKeyValue OperationData \Registry\machine\Schema\wcm://Microsoft-Windows-shell32?version=6.0.6002.18287&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\HKEY_CLASSES_ROOT_lnkfile_shellex_DropHandler_defaultValue, @default, , ewAwADAAMAAyADEANAAwADEALQAwADAAMAAwAC0AMAAwADAAMAAtAEMAMAAwADAALQAwADAAMAAwADAAMAAwADAAMAAwADQANgB9AAAA" Has anyone any idea how to fix this once and for all - reinstalling laptop after laptop from scratch is mildly annoying at work where Office and Firefox are the only extras, but even more annoying at home - I don't fancy going through the palaver of reinstalling everything yet again.

    Read the article

  • Can't get rsync over sftp to work

    - by Patrik
    I'm trying to set up a backup system from an Ubuntu server to a Synology NAS (DS413j) using rsync and sftp. I have created a user for this that we can call ubuntu-backup. I have a directory in ubuntu-backup home directory called www where the backup will be saved. I have enabled Network Backup in DSM The user ubuntu-backup has full access to it's home directory Here is my rsync config file on the Synology NAS: #motd file = /etc/rsyncd.motd #log file = /var/log/rsyncd.log pid file = /var/run/rsyncd.pid lock file = /var/run/rsync.lock use chroot = no [NetBackup] path = /var/services/NetBackup comment = Network Backup Share uid = root gid = root read only = no list = yes charset = utf-8 auth users = root secrets file = /etc/rsyncd.secrets [ubuntu-backup] path = /volume1/homes/ubuntu-backup/www comment = Ubuntu Backup uid = ubuntu-backup gid = users read only = false auth users = ubuntu-backup secrets file = /etc/rsyncd.secrets The permissions on /volume1/homes/ubuntu-backup/www is ubuntu-backup:users 777 Here is the command i'm running. rsync -aHvhiPb /var/www/ [email protected]:./ The result: sending incremental file list ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.9] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(605) [sender=3.0.9] If I'm running this: rsync -aHvhiPb /var/www/ [email protected] It looks like its sending files. No errors. But I cant find anything on the NAS.

    Read the article

  • How to work around blocked outbound hkp port for apt keys

    - by kief_morris
    I'm using Ubuntu 9.10, and need to add some apt repositories. Unfortunately, I get messages like this when running sudo apt-get update: W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9BF3BB4E5E17B5 W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1DABDBB4CEC06767 So, I need to install the keys for these repositories. Under 9.10 we now have the option to do this: sudo add-apt-repository ppa:nvidia-vdpau/ppa See this Ubuntu help article for details. This is great, except that I'm running this on a workstation behind a firewall which blocks outbound connections to pretty much all ports except those required by secretaries running Windows and IE. The port in question here is the hkp service, port 11371. There appear to be ways to manually download keys and install them on apt's keyring. There may even be a way to use add-apt-repository or wget or something to download a key from an alternative server making it available on port 80. However, I haven't yet found a concise set of steps for doing so. What I'm looking for is: How to find a public key for an apt-package (recommendations for resources which have these, and/or tips for searching. Searching for the key hash doesn't seem all that effective so far.) How to retrieve a key (can it be done automatically using gpg or add-apt-repository?) How to add a key to apt's keyring Thanks in advance.

    Read the article

  • NTFS permissions weird inheriance (second take!)

    - by Wil
    A complete re write of my previous question, in a different context. Basically, the issue is that when I create a new user within a new group, the new user has various permissions over various folders. I have deleted the group "users" from this user object, and it is simply a member of the group "test". I have created a folder called c:\foo, when I go to effective permissions under the security tab, I can see that the user "lockdown" has various permissions. As far as I can see, there is nothing that should allow lockdown access. The moment I remove users from this list, it behaves as I would expect, which makes me believe that for some strange reason, the users group behaves like the everyone group and is controlled by the system. That being said, I cannot understand this as under the list, it is not there - and further to this, with the same permissions as the first picture, guest does not have access. This has stumped me and any help is appreciated! (Tested in Windows 2003 and 2008) edit - Should also say that if I go to Effective Permission for the group the user is in, there are no boxes checked, so it is somehow just the user that is getting the permissions from somewhere.

    Read the article

  • What does this diagnostic output mean?

    - by ChrisF
    I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

    Read the article

  • "Safe" personal router use on apartment-wide network

    - by noisetank
    I recently moved into an apartment with internet included in my rent. This was a boon at first, but now I'm feeling limited. To get devices connected (wired or wireless), I have to whitelist the MAC addresses on mycampusnet.com. This is annoying (considering I'm well over the 10 device limit including my roommate's stuff), but what's really driving me mad is that I don't seem to have any semblance of a "local" network. I've relied heavily on static IPs and port forwarding in the past (accessing NAS and remote desktop) and (as far as I can understand), that functionality is nonexistent without my router set up. Also, as my wired and wireless devices don't always seem to make it onto the same subnet, I'm unable to use any of my iDevices with my Apple TV (I can, however, mirror to no less than four strangers' Apple TVs at any moment, which is a whole other level of discomforting). I've talked to the head of the apartment complex and she told me that they personally don't have any issue with my using a router, but the provider (CampusConnect) does not currently allow it. Apparently, enough people have put in complaints/requests about the restriction (the apartments are for graduate students and University staff, many of which need to set up things like VPNs for work reasons) to open up some sort of ticket to get the functionality in place, but all the calls I've made to get status updates have been a waste of time. My question is: If I plugged my router into the apartment network, what would happen? I've been told already that personal routers would "interfere with the wireless" and that they would shut my port down if I used one, but is that a legitimate thing or just something made up that sounds real to keep the average Joe from pushing it further? I'm guessing there's some way of configuring my router to keep it from disrupting the rest of the network, but it's not something they want to tell me for obvious reasons. Am I right? And if so, what are the chances that they'd notice the difference in traffic or whatever and shut off my port?

    Read the article

  • Running a service with a user from a different domain not working

    - by EWood
    I've been stuck on this for a while, not sure what permission I'm missing. I've got domain A and domain B, A trusts B, but B does not trust A. I'm trying to run a service in domain A with a user account from domain B and I keep getting Access is Denied. I'm using the FQDN after the username and the password is correct. The user account from domain B is a local administrator on the domain A server, the user account has the logon locally, and as a service permissions. Must. Get. This. Working. Update: I found something interesting in the logs I must have missed. This ought to get me pointed in the right direction. Event ID: 40961 - LsaSrv : The Security System could not establish a secured connection with the server ldap/{server fqdn/fqdn@fqdn} No authentication protocol was available. I've found a few fixes for 40961 but nothing has worked so far. I've verified reverse lookup zones. nslookup resolves the correct dc properly. still workin' at it. Upadte: In response to Evan; I ran " runas /env /user:ftp_user@fqdn "notepad" " then entered the users password and notepad came up. It seems to work successfully. This issue is now resolved. The problem is visible in the screenshot. Windows tries to use the UPN for the user account if you dig your user out of AD with the Browse button. This fails every time even with the right user and password. Simply using the SAM format (Domain\User) works. So simple, yet so annoying. Can't believe I missed this. Thanks to everyone who helped.

    Read the article

  • Setting up port forwarding for web server

    - by reyjavikvi
    This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

    Read the article

  • Is there a free PDF printer / distiller that creates signable documents?

    - by Coderer
    I've used various methods (mentioned elsewhere on this site) to create PDFs, using a printer driver or converting from PostScript, etc. The common problem is that if I open any of the output files in the newer versions of Adobe Reader, there's an option to "Place Signature" but it's greyed out, or gives an error message that the feature has been disabled for this document. As far as I can tell, there's an option set somewhere in the document metadata that tells Reader "allow the user to sign this document", or don't. None of the free/open source tools that have been been linked to in other SU posts have had this listed as an option (though to be fair I haven't actually downloaded and tried all of them). Is there a tool that does this? Can I just poke a bit with a hex editor somewhere to turn on this functionality? I can sometimes get access to Acrobat Professional to turn on this option, but doing it for every desired case would be more work than I care to do. The current workaround for single-page documents is: Print the document to PDF (possibly via postscript) Open a single-page blank PDF with the "signable" bit turned on in Reader create a custom "stamp" using the Reader markup tools, by importing the printed-to document "stamp" an image of the printed document on the blank page, hoping to get it centered about right place a signature over the document-but-not-really you just stamped This obviously does not scale well at all. It would be much better if I could: Print the document to PDF Drag the document to a simple shortcut / tool / whatever Open the document in Reader Place a signature in the document ETA: Sorry, maybe I should have been clearer -- I'm talking about the certificate-based digital signing available in Adobe Reader, not adding a virtual ink signature. Also, any solution really would have to be available offline.

    Read the article

  • port forwarding with socks over proxy

    - by Oz123
    I am trying to browse a wiki that runs on a server inside one domain from another domain. The wiki is accessible only on the LAN, but I need to browse it from another LAN to which I connect with an SSH tunnel ... Here is my setup and the steps I did so far: ~.ssh/confing on wikihost: Host gateway User kisteuser Port 443 Hostname gateway.companydomain.com ProxyCommand /home/myuser/bin/ssh-https-tunnel %h %p # ssh-https-tunnel: # http://ttcplinux.sourceforge.net/tools/stunnel Protocol 2 IdentityFile ~/.ssh/key_dsa LocalForward 11069 localhost:11069 Host server1 User kisteuser Hostname localhost Port 11069 LocalForward 8022 server1:22 LocalForward 17001 server1:7100 LocalForward 8080 www-proxy:3128 RemoteForward 11069 localhost:22 from wikihost myuser@wikihost: ssh -XC -t gateway.companydomain.com ssh -L11069:localhost:22 server1 on another terminal: ssh gateway.companydomain.com Now, on my companydomain I would like to start firefox and browse the wiki on wikihost. I did: [email protected] ~ $ ssh gateway Have a lot of fun... kisteuser@gateway ~ $ ssh -D 8383 localhost user@localhost's password: user@wikiserver:~> My .ssh/config on that side looks like that: host server1 localforward 11069 localhost:11069 host localhost user myuser port 11069 host wikiserver forwardagent yes user myuser port 11069 hostname localhost Now, I started firefox on the server called gateway, and edited the proxy settings to use SOCKSv5, specifying that the proxy should be gateway and use the port 8383... kisteuser@gateway ~ $ LANG=C firefox -P --no-remote And, now I get the following error popping in the Terminal of wikiserver: myuser@wikiserver:~> channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused Confused? Me too ... Please help me understand how to properly build the tunnels and browse the wiki over SOCKS protocol. update: I managed to browse the wiki on wikiserver with the following changes: host wikiserver forwardagent yes user myuser port 11069 hostname localhost localforward 8339 localhost:8443 Now when I ssh gateway I launch Firefox and go to localhost:8339 and I hit the start page of the wiki, which is served on Port 8443. Now I ask myself is SOCKS really needed? Can someone elaborate on that ?

    Read the article

  • Is the APC BR700G UPS (or similar) compatible with Active PFC power supplies?

    - by David Zaslavsky
    I'm looking at getting a UPS for my home computer. So far the APC BR700G looks very promising, except for one thing: one of the reviews on Newegg says that this UPS does not work with a power supply with Active PFC. Pros: Unit looks great, built well, very heavy, was excited to use it. Cons: Didn't research enough - many newer power supplies like my corsair 750w (and yes dells and other mainstreamers sell them too) that I bought last year have a feature called active pfc (power factor corrected). The signal for this backup battery doesn't fully support that feature and can cause issues. You can find an article on APCs site if you search their user forums for PFC. And the power supply in my computer is, in fact, an Active PFC PSU. I've already found one answer on this site claiming that it's not an issue, that "most quality supplies these days have PFC and work just fine with a UPS." That disagrees with the review on Newegg. Can someone explain this discrepancy? Also, what is it exactly about a UPS that makes it incompatible with an Active PFC PSU? (if anything) Is there some way to tell based on the technical specifications, or do I just have to hunt for reviews online to avoid wasting my money? While any input would be appreciated, I would prefer to get an answer from someone with actual experience with similar UPS's and Active PFC power supplies, who can tell me whether it works or not.

    Read the article

< Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >