Search Results

Search found 1812 results on 73 pages for 'amd radeon'.

Page 43/73 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • I can't get a native resolution of 1920x1080 on 11.10 (AOC f22 on a Nvidia Geforce GTS 450)

    - by Mikeeeee
    I have a problem were the highest resolution I can get is 1360x769, this is a 22 inch LCD monitor with a native resolution of 1920x1080_60 I have tried numerous drivers but nothing changed I tried editing the xorg.conf scipt with no success (I am a noob with linux though). Running many commands in terminal witch I got from people with similar problems only gives me errors like "Failed to get size of gamma for output default. I get edid checksum is invalid error on boot down also. I think there maybe a communication problem between my screens EDID and ubuntu although xp and windows 7 detect my screen without any errors and automatically set native resolution. also when I am installing ubuntu I get a horrible screen flashing every few seconds until I have installed the nvidia driver. pc specks if it helps x64 os, mainboard N68PV-GS, 4 gig ram, AMD Phenom(tm) 9350e Quad-Core Processor × 4, Nvidia Geforce gts450 512mb, hard drives set up in a onboard nvidia raid array striped. realy need to get a better resolution, 1360x769 does not look nice on a 22 inch screen. ty

    Read the article

  • vlc 1.1.9 not working properly

    - by jaggib
    I have installed vlc 1.1.9 on wubi installed Ubuntu 11.04 using Ubuntu Software Center. Now when i tried playing videos in vlc (any format) full screen mode doesnt show controls and usually doesnt gets me out to window mode. it sometimes crashes to login screen. I tried the video output to 'X11 output mode' and 'XVideo output (XCB)' but the above problem persists and also bring another problem. full screen mode doesnt responds always when it does, it shows the video over the desktop instead of inside the player. the only way to get ubuntu to function normally is to restart the system. I tried with not using the 'Embed video in interface' but still the same problem. vlc runs perfectly well in windows. How can i make vlc function properly on my system or i need to install another player? My system config is: Graphics: VIA/S3G UniChrome Pro IGP Processor: AMD Sempron(tm) Processor 2800+ RAM: 1.5GB Motherboard Name: MS-7181 (MSI)

    Read the article

  • Need help with gimp 2.8 (cpu not used to full capacity) [closed]

    - by Birgir Freyr
    I know this isn't the right place to ask this question but maybe some one here can point me out to were I should place this question (or help me fix it :)). Since I updated Gimp to 2.8 (and let me start by saying how happy I am with the new gimp) I have notice that Gimp only uses 35% max of my CPU power. I have tried changing settings, assigning only one CPU to Gimp (both in gimp preference and in windblows task manager). No matter what settings I choose it only uses 35% of the cpu. If I assign just one Core to it then Gimp will use 100% of that core (which is about 35% of a three core processor I have. Any thoughts? I am using Windblows 7 64 bit, gimp 2.8.0, AMD a6-3500 cpu. I also use Ubuntu (am going to see if it works the same there). Any help would be great.

    Read the article

  • Distorted choppy audio in Precise

    - by Misery
    After installing Precise on my PC, some problems with soud occure. While using Lucid there were no problems. The sound is choppy and distorted in low tones range. As I absolutely have no experience in setting/testing and doing anything with Audo Devices I need help even to diagnose the problem. update: sudo lshw -c multimedia *-multimedia description: Audio device product: Radeon X1200 Series Audio Controller vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 5.2 bus info: pci@0000:01:05.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:19 memory:fdafc000-fdafffff *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff update 2: It has something to do with the volume. If the audio is quiet it is not choppy, if the sound is loud then it begins to be choppy. Regards, Misery

    Read the article

  • Ubuntu 12.04 wallpaper problem when using two monitors

    - by jiomsa
    I am using two monitors, the main resolution is 1920x1080 and the secondary is 1440x900. Everything seems to work fine (with default drivers, fglrx crashes bad), besides windows opening in the wrong monitor (even when the main is set correctly), but now what I am trying to fix is the wallpaper problem, here's an image to explain it easier: http://i.imgur.com/msLRR.jpg It also happens with gradients. The secondary monitor is physically aligned like in the image, lower than the other, the wallpaper on the main screen seems to keep the size of the lower resolution, and then it start at the correct resolution the last part at right. Any way to fix this? I am using Ubuntu 12.04 with Gnome-Shell 3.4.1, the vga is a Radeon HD 6950 UPDATE I went to gnome-tweak-tool and disabled "Have file manager handle the desktop", now it looks ok on both monitors, but I can't have icons on my desktop, so I am still interested in solving it. UPDATE2 Disabling "Have file manager handle the desktop", in gnome-tweak-tool and then re-enabling it seems to work, but has to be done every time you turn on the PC.

    Read the article

  • After reinstalling ATI graphics drivers, my keyboard and mouse aren't working anymore

    - by Lifelike27
    On Ubuntu 11.04 I tried to install the open source drivers for my laptops ATI Mobility Radeon 5470M but I messed that up a bit and lost xserver. Now I've managed to solve that problem with this and by downloading the ATI proprietary drivers and install those manually. Now, when Ubuntu loads up I get to the login screen but I can't use my mouse or my keyboard (usb keyboard and mouse doesn't work either). If I use the recovery console, then login with that and then run 'startx'. I can login fine (though Unity doesn't show, the graphics seem to be working because it shows the fading animation of libnotify), but I can't type or move my mouse.

    Read the article

  • Grpahic hardwares

    - by Vanangamudi
    Which vendor provides better GPGPU. my requirements are confined to rendering utilising the GPU for BSDF building for e.g. Intel started providing Ivy Bridge chipset GPU, which are comparably fast to HD5960 cards. I'm not that against nvidia or amd. but I'm a fan of Intel. how it compares to nvidia in price and performance. if possible may I know, how all of them perform with OpenCL?? I'm not sure if it is right to ask it here. but I don't know where to ask.

    Read the article

  • Gnome/X logs off immediately after login -- which logfiles are relevant?

    - by joebuntu
    I've been tinkering with fingerprint-gui as well as X/xrandr resolution settings. When I start my machine, it boots up normally. As soon as X and gnome have finished starting, it logs me off automatically and brings me back to the gdm login prompt with the user list. Then I am, however, able to log in using "Ubuntu Desktop Fail-safe". I've checked the list of start-up applications, but everything seems fine there. I can't yet put my finger on what exactly might be responsible for this: X, gnome or some messed up pam.d settings. So far I've checked /var/logs/X11/xorg.0.log, /var/logs/auth.log and ~/.xsession-errors. In addition, I don't quite seem to understand the "interplay" between X, GDM, GNOME, GNOME-policykit, PAM.d and all that. Are there any other relevant log files that could point me to what's broken? Specs: Ubuntu 10.10 Maverick Meerkat IBM/Lenovo Thinkpad R60, ATI Radeon x1400 Mobility all updates installed Linux User 1 year+,

    Read the article

  • ubuntu 12.10 slow application load upon restart

    - by Adam
    new ubuntu user. after boot (boot is quite fast), opening applications such as firefox, libra, system settings, takes close to 10 seconds to open. after the application is loaded in RAM, the application opens fine. the system feels snappy, quick. when i have two FIREFOX open, unity is snappy in showing me the two windows side by side. but upon bootup, loading the application takes 10 seconds. there is not much hdd activity. fresh install. its the same for system settings and browsing system settings. when system settings is opened for the first time (10 second), and i click for example Color, it will take quite long to open the color settings. hardware: i3 4gb ram radeon 5770 250gb sata gigabyte h55m motherboard i am using ubuntu straight out of the box, no propriety drivers. 64 bit. i have reinstalled OS, and still the same.

    Read the article

  • Can't install ATI proprietary drivers in 12.10

    - by EApubs
    I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

    Read the article

  • Mic not working on Lenovo G470

    - by Caveman
    I used a Lenovo G470 laptop (Core i5 2410M processor, AMD Radeon 6370M and 2GB DDR3 RAM) and I installed Ubuntu 12.04. I can't get the microphone to work. I encountered this type of issue before in my old Acer Aspire One with Ubuntu 10.04/10.10, and installing PulseAudio Volume Control and tweaking a little solves the problem. I tried the same solution to no avail in 12.04. I tried entering the alsa in terminal and my mic is not detected there. Does anybody encountered a similar problem? Any help will be greatly appreciated.

    Read the article

  • Ubuntu 12.10 Laptop temperature

    - by romi
    I'm using a laptop having dedicated graphics card with Ubuntu and Windows 7 dual boot. The windows 7 idle temperature for cpu is 51C average and gpu is 46-48.5C, and when in load Cpu temp varies between 55-61C, and GPU 49-51 MAX. But in ubuntu idle temp CPU: 54c Gpu(ati radeon,proprietary driver installed): 50C and on load cpu: 58-69C gpu:53C max. Is it normal? If not is there any solution? Note that i'm using jupiter,latest graphics driver, grub tweaks etc.

    Read the article

  • Unable to install Steam 64bit - Wrong architecture (Lubuntu 12.04)

    - by Ian
    I'm on a new install of Lubuntu 12.04 on an Acer Aspire 5534 (specifications here, tl;dr: AMD dual-core 64bit) trying to install steam_latest.deb from the Steam website. When I open gdebi to install, it tells me that it's uninstallable because it's for a i386 architecture. I've tried installing ia32-libs (installed, no success), gdebi --add-architecture i386 (with and without --force, command unknown). This is all I've found to fix the problem, but none of it has worked for me. Any suggestions are welcome, thanks for your time.

    Read the article

  • Ubuntu hanging problem

    - by JMearsXS
    I have a problem with ubuntu 12.04 LTS on my custom tower pc in which the OS hangs at specific points:- - live usb with persistence: hangs when mouse appears. - installed to hard disk: hangs after login, logon sound never plays. i am a relative newbie with linux so any terminal output would not make sense to me :) the pc specs are as follows: - MSI MS-7301 Cuba motherboard - 3GB DDR2 RAM (NOT dual channel) - ATI Radeon HD 5450 gfx card the live usb works fine on all other PC's i tried it on. could any one help me ?

    Read the article

  • Why don't 12.04 Nvidia drivers work on my GeForce 6150 LE?

    - by Chris
    I got a slimline s7600n and of course i put ubuntu 12.04 on it. Im using recommended proprietary drivers and they are just not working to well. My monitor is 1366x768 but it will only do 1360x768 and minecraft barely runs at all. Besides that everything is fine. But i gota play minecraft! help! lol Thanks. :) Other specs is cpu amd athlon 64 dual core 2ghz ram 1 gig vid is 256mb 64bit Not sure what other info yall need.

    Read the article

  • how to fix error with ati driver ubuntu 11.10 X Error of failed request?

    - by user34785
    i install driver by this link : http://cisight.com/install-amd-radeon-hd-6470m-and-solve-overheat-on-ubuntu-1110-oneiric/ but will time i run fglrxinfo , display it : X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 136 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 my xorg is : Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "fglrx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection how may i solve it? thanks

    Read the article

  • VirtualBox install

    - by Chris
    I am using Win 7 Ultimate. I have the current version of Virtualbox. I downloaded Ubuntu 12.10 from the Ubuntu website and the install as disc image. Ubuntu probably goes thru about 75% of the install and then I get an error message saying that there is a hardware issue and cannot continue. The error message also says it cannot read the disc, etc, etc. I have downloaded 2 different versions of Ubuntu. I had downloaded and re-installed VirtualBox twice. I also tried 12.04 but came into the same issue. I downloaded the "desktop AMD-64" Thank you in advance for your help.

    Read the article

  • Problems after installing Ubuntu LiveUSB on my 2nd HD

    - by user113106
    I decided to create a Ubuntu USB installer using the Universal USB Installer, selecting a Ubuntu 12.10 ISO. I selected my D: drive, my NON-windows7 carrying drive as install. After this I Re-booted my system and my PC began to Run the Ubuntu Boot-startscreen every time I power up the machine, giving errors like this: Root=Unknown I used my girlfriend's laptop to create, on the exact same way, a real! USB Ubuntu installer. Booting from that USB, picking the option Run Ubuntu from this USB I get the following error: http://postimage.org/image/63qkv98c1/ Let's try installing it from that USB to a Hard-Disk: http://postimage.org/image/usqbwymfx/ As I said: I do not have the Option to pick my Boot-section, at this very moment I can only access to the Ubuntu installation and nothing else. I've read about 90% of other Questions that could've been related, but I could not find a solution. BTW I'm running a Acer Aspire 2Quadcore 4gb DDR 2 Ati Radeon HD, 64bit and I've set my Bios OS-usage from Windows to "Others"

    Read the article

  • Linux 3.10 améliore la mise en cache pour les SSD et offre de meilleures performances pour le CPU et le GPU, la version stable disponible

    Linux 3.10 améliore la mise en cache pour les SSD et offre de meilleures performances pour le CPU et le GPU, la version stable disponibleComme il est de coutume, Linus Torvalds a annoncé la publication de la version stable du noyau Linux 3.10.Cette nouvelle mouture, qui sort pratiquement deux mois après son prédécesseur, se distingue essentiellement par une meilleure prise en charge des disques SSD, le support de Radeon et des améliorations pour le CPU et GPU.Développée pendant plus d'un an, la technologie de mise en cache SSD « block layer cache » (Bcache) a été intégrée à Linux 3.10. Cette fonctionnalité peut être utilisée pour configurer un disque comme mémoire cache pour un autre disque pl...

    Read the article

  • Ubuntu 12.04 UEFI Partition Boot Fail

    - by John
    I've built a new system, and I want to take full advantage of UEFI and Ubuntu. So I install Ubuntu, and try to boot from it, and my BIOS (Asus EZ Mode / Advanced Mode) simply says "No bootable medium found. Insert Bootable Medium and press any key to try again." So I've reinstalled several times, without any failures, Ubuntu IS installed, and I've tried Ubuntu Boot Repair (link below) and nothing I do seems to work. My Build: Asus f1a75m pro AMD A8 APU Samsung 1TB HDD 8GB G-Skill Ripjaws X (1866) Partitions and Ubuntu Boot Repair here

    Read the article

  • Advice on triple/quadruple-booting?

    - by professorfish
    I am currently running Windows 7 Home Premium x64 on my laptop. I would like to install more than one Linux distro, IN ADDITION TO Windows 7. How do I go about this, what do I need to be careful and aware of, is it possible? The specific distros I might eventually install: Definitely: Ubuntu (is it a good idea to install the Linux-Secure-Remix version?) Almost definitely: OpenSUSE Probably: Zorin Possibly: Arch Possibly: Fedora Possibly: FreeBSD Computer details: Successfully used WUBI for Ubuntu in the past Recently reinstalled Windows using the RECOVERY partition Windows 7 Home Premium x64 model: ASUS K53U series AMD Brazos Dual Core E450 1.65 GHz 750GB hard drive, currently partitioned into C: (300GB total, 246 GB free), D: (373GB - total, 167 GB free), and RECOVERY (the rest of the space, I think) 4GB RAM Can I be sure that GRUB will work, if WUBI has worked? In short, how do I go about triple- or quadruple-booting Windows 7, Ubuntu and other distros? What do I need to be aware of? How do I set up the partition structure? Thank you in advance

    Read the article

  • Massive crash and kernel panic after updates yesterday, what now?

    - by Ghost
    Got 12.04 on an AMD+radeon machine, everything was running fine until last night when the update manager installed new packages, and now the moment I open a browser (firefox, chromium, anything) it crashes instantly. It says warning: at build/buildd/linux-3.5.0/arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x5b/0x60() Pid: 2432, comm: chrome_dbthread tainted: G D 3.5.0-2generic #2-ubuntu I already tried uninstalling the packages from the update log, didn't solve a thing. Depending of which browser I use I get a different reaction, like a complete freeze instead of a text console crash. Ideas? I really don't know what to do.

    Read the article

  • Ubuntu 12.04 on MBPro, Early 2011, options

    - by sthysel
    I have a 2.2 GHz i7, 4GB MacBook Pro 8.3, AMD Radeon HD 6750M 1024 MB, Early 2011. As far as I see I have two options, running Ubuntu on this hardware: VMWare/Virtualbox and Ubuntu in a VM, I already ordered a 16G RAM upgrade for this. Wipe OSX and go Ubuntu native, with 16G RAM, yay ! I'm kinda leaning towards option 2 as I tend to spend 90% of my time in dev VM's at work anyway. All my other machines at home, and most at work are Ubuntu/Linux as well. I have a Mac mini on standby for the odd Itunes backup/sync. If I don't have to keep OSX around, I would like to get rid of it altogether. Ubuntu support on Mac hardware seems to be a hit and miss affair as far as I can tell. Does anyone have good success running a recent version of Ubuntu on this hardware ? Thanks

    Read the article

  • ubuntu 14.04LTS flickering

    - by user292609
    when I start the computer, makes a big high pitch sound and the only thing I can see on the screen is "[[23" written everywhere . I have to start it always through the recovery mode. Ubuntu desktop screen does not flick, but every window that can maximmize and minimize does it like crazy. Like firefox browser, terminal, vlc.. I have a Lap top Acer Aspire One with AMD/ATI graphic card. I read many forums about flickering screen and I try many things , but I still have the problem. I am very new in Ubuntu. Please help

    Read the article

  • wubi install of ubuntu 12.10 on hp dv6 6154tx causes uncontrolled heating, fan speed, low battery life

    - by kansi
    i have a hp dv6 6154tx with an integrated Intel GPU and a discrete ATI GPU (Radeon Mobility HD 6490M (1 GB DDR5)). -Problems: when i install ubuntu 12.10 using wubi, my laptop starts heating, fans start to run fast (to much of noise), and battery goes really low Any attempt to install catalyst drivers (from ati official site and also proprietary drivers) fails , as after reboot when i login everything is gone like no unity no desktop and sometimes black screen appears. even bumblebee and jupiter didnt help.... :( So PLEASE, PLEASE can somebody post the real solution to my problems i.e.(inc battery life and stop fan noise and heating). (i want to install ubuntu only using wubi)

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >