Search Results

Search found 2929 results on 118 pages for 'avatar generation'.

Page 43/118 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

    - by el10780
    After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

    Read the article

  • 12.04 making BCM4313 card work with aircrack-ng?

    - by Charles Forest
    I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

    Read the article

  • Programmatically creating vector arrows in KML

    - by mettadore
    Does anyone have any practical examples of programmatically drawing icons as vectors in KML? Specifically, I have data with a magnitude and an azimuth at given coordinates, and I would like to have icons (or another graphical element) generated based on these values. Some thoughts on how I might approach it: Image directory (a brute force way): Make an image director of 360 different image files (probably batch rotate a single image) each pointing in a cooresponding azimuth. I've seen things like "Excel to KML," but am looking for code that I can use within a program, rather than a web utility. Issue: Arrow does not contain magnitude context, so that would have to be a label. I'd rather dynamically lengthen the arrow. Line creation in KML: Perhaps create a formula that creates a line with the origin at the coordinate points, with the length of the line proportional to the magnitute, and angled according to azimuth. There would then be two more lines, perhaps 30 degrees or so extending from the end of the previous line to make the arrow head. Issues: Not a separate image icon, so not sure how it would work in KML. Also not sure how easy it would be to generate this algorithm. Separate image generation: Perhaps create a PHP file that uses imagemagick or something similar to dynamically generate a .png file in a similar method to the above, and then link to the icon using the URI "domain.tld/imagegen.php?magnitude=magvalue&azimuth=azmvalue". Issue: Still have the problem of actually writing the algorithm for image generation. So, the question: has anyone else come up with solutions for programmatic vector (rather than merely arrow) generation?

    Read the article

  • x86 .net application with system.OutOfMemoryException

    - by Allen
    Hi,Guys I got OutOfMemoryException after the app running for 1 day, the app totally use 1.5G memory , all consumed by managed heap, gen 2 used 200mb , and LOB used 1.3mb, however the weired thing is, 900mb of space are Free. from perf counter I saw there had number of gen 2 gc collection happened, why GC collector cannot collect those 900mb free space in gen2 and LOB? I'm really appreicate for your help. following info are from windbg: 0:000> !eeheap -gc Number of GC Heaps: 1 generation 0 starts at 0x183153f0 generation 1 starts at 0x182aa834 generation 2 starts at 0x02131000 ephemeral segment allocation context: none segment begin allocated size 02130000 02131000 0312f284 0xffe284(16769668) 07750000 07751000 0874fc5c 0xffec5c(16772188) 09e30000 09e31000 0ae2fc2c 0xffec2c(16772140) 0b230000 0b231000 0c22ffec 0xffefec(16773100) 0c230000 0c231000 0d22f6f0 0xffe6f0(16770800) 0d230000 0d231000 0e22ea10 0xffda10(16767504) 0e230000 0e231000 0f22c1c4 0xffb1c4(16757188) 10390000 10391000 1138ddf4 0xffcdf4(16764404) 154e0000 154e1000 164da90c 0xff990c(16750860) 34aa0000 34aa1000 35a9dbfc 0xffcbfc(16763900) 7aca0000 7aca1000 7bc9edfc 0xffddfc(16768508) 49760000 49761000 4a75ef64 0xffdf64(16768868) 7bca0000 7bca1000 7cc99bac 0xff8bac(16747436) 17a70000 17a71000 183313fc 0x8c03fc(9176060) Large object heap starts at 0x03131000 segment begin allocated size 03130000 03131000 041250c8 0xff40c8(16728264) 08920000 08921000 099102f8 0xfef2f8(16708344) .... .... 4c760000 4c761000 4d71d578 0xfbc578(16500088) 1bb10000 1bb11000 1ca110d0 0xf000d0(15728848) 57760000 57761000 5862d7f8 0xecc7f8(15517688) Total Size: Size: 0x5ab13450 (1521562704) bytes. ------------------------------ GC Heap Size: Size: 0x5ab13450 (1521562704) bytes. 0:000> !dumpheap -stat total 0 objects Statistics: MT Count TotalSize Class Name 73037c78 1 12 System.Configuration.GenericEnumConverter 73036da0 1 12 System.Configuration.InfiniteIntConverter .... .... 69161c3c 35025 6809420 System.Windows.EffectiveValueEntry[] 69164748 54 12471072 MS.Internal.WeakEventTable+EventKey[] 710e2228 9540 190389260 System.Byte[] 710dd2b8 1317031 339257932 System.String 0035a670 6427 902224056 Free Total 3615631 objects

    Read the article

  • Building an 'Activation Key' Generator in JAVA

    - by jax
    I want to develop a Key generator for my phone applications. Currently I am using an external service to do the job but I am a little concerned that the service might go offline one day hence I will be in a bit of a pickle. How authentication works now. Public key stored on the phone. When the user requests a key the 'phone ID' is sent to the "Key Generation Service" and the encrypted key key is returned and stored inside a license file. On the phone I can check if the key is for the current phone by using a method getPhoneId() which I can check with the the current phone and grant or not grant access to features. I like this and it works well, however, I want to create my own "Key Generation Service" from my own website. Requirements: Public and Private Key Encryption:(Bouncy Castle) Written in JAVA Must support getApplicationId() (so that many applications can use the same key generator) and getPhoneId() (to get the phone id out of the encrypted license file) I want to be able to send the ApplicationId and PhoneId to the service for license key generation. Can someone give me some pointers on how to accomplish this? I have dabbled around with some java encryption but am definitely no expert and can't find anything that will help me. A list of the Java classes I would need to instantiate would be helpful.

    Read the article

  • Coupling/Cohesion

    - by user559142
    Hi All, Whilst there are many good examples on this forum that contain examples of coupling and cohesion, I am struggling to apply it to my code fully. I can identify parts in my code that may need changing. Would any Java experts be able to take a look at my code and explain to me what aspects are good and bad. I don't mind changing it myself at all. It's just that many people seem to disagree with each other and I'm finding it hard to actually understand what principles to follow... package familytree; /** * * @author David */ public class Main { /** * @param args the command line arguments */ public static void main(String[] args) { // TODO code application logic here KeyboardInput in = new KeyboardInput(); FamilyTree familyTree = new FamilyTree(in, System.out); familyTree.start(); } } package familytree; import java.io.PrintStream; /** * * @author David */ public class FamilyTree { /** * @param args the command line arguments */ private static final int DISPLAY_FAMILY_MEMBERS = 1; private static final int ADD_FAMILY_MEMBER = 2; private static final int REMOVE_FAMILY_MEMBER = 3; private static final int EDIT_FAMILY_MEMBER = 4; private static final int SAVE_FAMILY_TREE = 5; private static final int LOAD_FAMILY_TREE = 6; private static final int DISPLAY_ANCESTORS = 7; private static final int DISPLAY_DESCENDANTS = 8; private static final int QUIT = 9; private KeyboardInput in; private Family family; private PrintStream out; public FamilyTree(KeyboardInput in, PrintStream out) { this.in = in; this.out = out; family = new Family(); } public void start() { out.println("\nWelcome to the Family Tree Builder"); //enterUserDetails(); initialise(); while (true) { displayFamilyTreeMenu(); out.print("\nEnter Choice: "); int option = in.readInteger(); if (option > 0 && option <= 8) { if (quit(option)) { break; } executeOption(option); } else { out.println("Invalid Choice!"); } } } //good private void displayFamilyTreeMenu() { out.println("\nFamily Tree Menu"); out.println(DISPLAY_FAMILY_MEMBERS + ". Display Family Members"); out.println(ADD_FAMILY_MEMBER + ". Add Family Member"); out.println(REMOVE_FAMILY_MEMBER + ". Remove Family Member"); out.println(EDIT_FAMILY_MEMBER + ". Edit Family Member"); out.println(SAVE_FAMILY_TREE + ". Save Family Tree"); out.println(LOAD_FAMILY_TREE + ". Load Family Tree"); out.println(DISPLAY_ANCESTORS + ". Display Ancestors"); out.println(DISPLAY_DESCENDANTS + ". Display Descendants"); out.println(QUIT + ". Quit"); } //good private boolean quit(int opt) { return (opt == QUIT) ? true : false; } //good private void executeOption(int choice) { switch (choice) { case DISPLAY_FAMILY_MEMBERS: displayFamilyMembers(); break; case ADD_FAMILY_MEMBER: addFamilyMember(); break; case REMOVE_FAMILY_MEMBER: break; case EDIT_FAMILY_MEMBER: break; case SAVE_FAMILY_TREE: break; case LOAD_FAMILY_TREE: break; case DISPLAY_ANCESTORS: displayAncestors(); break; case DISPLAY_DESCENDANTS: displayDescendants(); break; default: out.println("Not a valid option! Try again."); break; } } //for selecting family member for editing adding nodes etc private void displayFamilyMembers() { out.println("\nDisplay Family Members"); int count = 0; for (FamilyMember member : family.getFamilyMembers()) { out.println(); if (count + 1 < 10) { out.println((count + 1) + ". " + member.getFirstName() + " " + member.getLastName()); out.println(" " + member.getDob()); out.println(" Generation: " + member.getGeneration()); } else { out.println((count + 1) + ". " + member.getFirstName() + " " + member.getLastName()); out.println(" " + member.getDob()); out.println(" Generation: " + member.getGeneration()); } count++; } } private int selectRelative() { out.println("\nSelect Relative"); out.println("1. Add Parents"); out.println("2. Add Child"); out.println("3. Add Partner"); out.println("4. Add Sibling"); out.print("\nEnter Choice: "); int choice = in.readInteger(); if (choice > 0 && choice < 5) { return choice; } return (-1); } private void addFamilyMember() { int memberIndex = selectMember(); if (memberIndex >= 0) { FamilyMember member = family.getFamilyMember(memberIndex); int relative = selectRelative(); if (relative > 0) { out.println("\nAdd Member"); //if choice is valid switch (relative) { case 1: //adding parents if (member.getFather() == null) { FamilyMember mum, dad; out.println("Enter Mothers Details"); mum = addMember(relative, "Female"); out.println("\nEnter Fathers Details"); dad = addMember(relative, "Male"); member.linkParent(mum); member.linkParent(dad); mum.linkPartner(dad); mum.setGeneration(member.getGeneration() - 1); dad.setGeneration(member.getGeneration() - 1); sortGenerations(); } else { out.println(member.getFirstName() + " " + member.getLastName() + " already has parents."); } break; case 2: //adding child if (member.getPartner() == null) { FamilyMember partner; if (member.getGender().equals("Male")) { out.println("Enter Mothers Details"); partner = addMember(1, "Female"); } else { out.println("Enter Fathers Details"); partner = addMember(1, "Male"); } //create partner member.linkPartner(partner); partner.setGeneration(member.getGeneration()); out.println(); } out.println("Enter Childs Details"); FamilyMember child = addMember(relative, ""); child.linkParent(member); child.linkParent(member.getPartner()); child.setGeneration(member.getGeneration() + 1); sortGenerations(); break; case 3: //adding partner if (member.getPartner() == null) { out.println("Enter Partners Details"); FamilyMember partner = addMember(relative, ""); member.linkPartner(partner); partner.setGeneration(member.getGeneration()); } else { out.println(member.getFirstName() + " " + member.getLastName() + " already has a partner."); } break; case 4: //adding sibling FamilyMember mum, dad; if (member.getFather() == null) { out.println("Enter Mothers Details"); mum = addMember(1, "Female"); out.println("\nEnter Fathers Details"); dad = addMember(1, "Male"); member.linkParent(mum); member.linkParent(dad); mum.linkPartner(dad); mum.setGeneration(member.getGeneration() - 1); dad.setGeneration(member.getGeneration() - 1); sortGenerations(); out.println("\nEnter Siblings Details"); } else { out.println("Enter Siblings Details"); } FamilyMember sibling = addMember(relative, ""); //create mum and dad mum = member.getMother(); dad = member.getFather(); sibling.linkParent(mum); sibling.linkParent(dad); sibling.setGeneration(member.getGeneration()); break; } } else { out.println("Invalid Option!"); } } else { out.println("Invalid Option!"); } } private int selectMember() { displayFamilyMembers(); out.print("\nSelect Member: "); int choice = in.readInteger(); if (choice > 0 && choice <= family.getFamilyMembers().size()) { return (choice - 1); } return -1; } private FamilyMember addMember(int option, String gender) { out.print("Enter First Name: "); String fName = formatString(in.readString().trim()); out.print("Enter Last Name: "); String lName = formatString(in.readString().trim()); if (option != 1) { //if not adding parents out.println("Select Gender"); out.println("1. Male"); out.println("2. Female"); out.print("Enter Choice: "); int gOpt = in.readInteger(); if (gOpt == 1) { gender = "Male"; } else if (gOpt == 2) { gender = "Female"; } else { out.println("Invalid Choice"); return null; } } String dob = enterDateOfBirth(); lName = formatString(lName); FamilyMember f = family.getFamilyMember(family.addMember(fName, lName, gender, dob)); f.setIndex(family.getFamilyMembers().size() - 1); return (f); } private String formatString(String s){ String firstLetter = s.substring(0, 1); String remainingLetters = s.substring(1, s.length()); s = firstLetter.toUpperCase() + remainingLetters.toLowerCase(); return s; } private String enterDateOfBirth(){ out.print("Enter Year Of Birth (0 - 2011): "); String y = in.readString(); out.print("Enter Month Of Birth (1-12): "); String m = in.readString(); if (Integer.parseInt(m) < 10) { m = "0" + m; } m += "-"; out.print("Enter Date of Birth (1-31): "); String d = in.readString(); if (Integer.parseInt(d) < 10) { d = "0" + d; } d += "-"; String dob = d + m + y; while(!DateValidator.isValid(dob)){ out.println("Invalid Date. Try Again:"); dob = enterDateOfBirth(); } return (dob); } private void displayAncestors() { out.print("\nDisplay Ancestors For Which Member: "); int choice = selectMember(); if (choice >= 0) { FamilyMember node = family.getFamilyMember(choice ); FamilyMember ms = findRootNode(node, 0, 2, -1); FamilyMember fs = findRootNode(node, 1, 2, -1); out.println("\nPrint Ancestors"); out.println("\nMothers Side"); printDescendants(ms, node, ms.getGeneration()); out.println("\nFathers Side"); printDescendants(fs, node, fs.getGeneration()); } else { out.println("Invalid Option!"); } } private void displayDescendants() { out.print("\nDisplay Descendants For Which Member: "); int choice = selectMember(); if (choice >= 0) { FamilyMember node = family.getFamilyMember(choice); out.println("\nPrint Descendants"); printDescendants(node, null, 0); } else { out.println("Invalid Option!"); } } private FamilyMember findRootNode(FamilyMember node, int parent, int numGenerations, int count) { FamilyMember root; count++; if (node.hasParents() && count < numGenerations) { if (parent == 0) { node = node.getMother(); root = findRootNode(node, 1, numGenerations, count); } else { node = node.getFather(); root = findRootNode(node, 1, numGenerations, count); } return root; } return node; } private int findHighestLeafGeneration(FamilyMember node) { int gen = node.getGeneration(); for (int i = 0; i < node.getChildren().size(); i++) { int highestChild = findHighestLeafGeneration(node.getChild(i)); if (highestChild > gen) { gen = highestChild; } } return gen; } private void printDescendants(FamilyMember root, FamilyMember node, int gen) { out.print((root.getGeneration() + 1) + " " + root.getFullName()); out.print(" [" + root.getDob() + "] "); if (root.getPartner() != null) { out.print("+Partner: " + root.getPartner().getFullName() + " [" + root.getPartner().getDob() + "] "); } if (root == node) { out.print("*"); } out.println(); if (!root.getChildren().isEmpty() && root != node) { for (int i = 0; i < root.getChildren().size(); i++) { for (int j = 0; j < root.getChild(i).getGeneration() - gen; j++) { out.print(" "); } printDescendants(root.getChild(i), node, gen); } } else { return; } } //retrieve highest generation public int getRootGeneration(){ int min = family.getFamilyMember(0).getGeneration(); for(int i = 0; i < family.getFamilyMembers().size(); i++){ min = Math.min(min, family.getFamilyMember(i).getGeneration()); } return Math.abs(min); } public void sortGenerations(){ int amount = getRootGeneration(); for (FamilyMember member : family.getFamilyMembers()) { member.setGeneration(member.getGeneration() + amount); } } //test method - temporary private void initialise() { family.addMember("Bilbo", "Baggins", "Male", "23-06-1920"); } } package familytree; import java.util.ArrayList; import java.util.Date; /** * * @author David */ public class Family { //family members private ArrayList<FamilyMember> family; //create Family public Family() { family = new ArrayList<FamilyMember>(); } //add member to the family public int addMember(String f, String l, String g, String d) { family.add(new FamilyMember(f, l, g, d)); return family.size()-1; } //remove member from family public void removeMember(int index) { family.remove(index); } public FamilyMember getFamilyMember(int index) { return family.get(index); } //return family public ArrayList <FamilyMember> getFamilyMembers() { return family; } public void changeFirstName(int index, String f) { family.get(index).setFirstName(f);//change to setfirstname and others } public void changeLastName(int index, String l) { family.get(index).setLastName(l); } public void changeAge(int index, int a) { family.get(index).setAge(a); } public void changeDOB() { //implement } } package familytree; import java.util.ArrayList; import java.util.Collections; /** * * @author David */ public class FamilyMember extends Person { private FamilyMember mother; private FamilyMember father; private FamilyMember partner; private ArrayList<FamilyMember> children; private int generation; private int index; //initialise family member public FamilyMember(String f, String l, String g, String d) { super(f, l, g, d); mother = null; father = null; partner = null; children = new ArrayList<FamilyMember>(); generation = 0; index = -1; } public void linkParent(FamilyMember parent) { if (parent.getGender().equals("Female")) { this.setMother(parent); } else { this.setFather(parent); } parent.addChild(this); } public void linkPartner(FamilyMember partner) { partner.setPartner(this); this.setPartner(partner); } public boolean hasParents() { if (this.getMother() == null && this.getFather() == null) { return false; } return true; } public FamilyMember getMother() { return mother; } public FamilyMember getFather() { return father; } public FamilyMember getPartner() { return partner; } public FamilyMember getChild(int index) { return children.get(index); } public int getGeneration() { return generation; } public int getIndex() { return index; } public ArrayList<FamilyMember> getChildren() { return children; } public void setMother(FamilyMember f) { mother = f; } public void setFather(FamilyMember f) { father = f; } public void setPartner(FamilyMember f) { partner = f; } public void addChild(FamilyMember f) { children.add(f); //add child if(children.size() > 1){ //sort in ascending order Collections.sort(children, new DateComparator()); } } public void addChildAt(FamilyMember f, int index) { children.set(index, f); } public void setGeneration(int g) { generation = g; } public void setIndex(int i){ index = i; } } package familytree; /** * * @author David */ public class Person{ private String fName; private String lName; private String gender; private int age; private String dob; public Person(String fName, String lName, String gender, String dob){ this.fName = fName; this.lName = lName; this.gender = gender; this.dob = dob; } public String getFullName(){ return (this.fName + " " + this.lName); } public String getFirstName(){ return (fName); } public String getLastName(){ return (lName); } public String getGender(){ return (gender); } public String getDob(){ return dob; } public int getAge(){ return age; } public void setFirstName(String fName){ this.fName = fName; } public void setLastName(String lName){ this.lName = lName; } public void setGender(String gender){ this.gender = gender; } public void setAge(int age){ this.age = age; } }

    Read the article

  • JVM process resident set size "equals" max heap size, not current heap size

    - by Volune
    After a few reading about jvm memory (here, here, here, others I forgot...), I am expecting the resident set size of my java process to be roughly equal to the current heap space capacity. That's not what the numbers are saying, it seems to be roughly equal to the max heap space capacity: Resident set size: # echo 0 $(cat /proc/1/smaps | grep Rss | awk '{print $2}' | sed 's#^#+#') | bc 11507912 # ps -C java -O rss | gawk '{ count ++; sum += $2 }; END {count --; print "Number of processes =",count; print "Memory usage per process =",sum/1024/count, "MB"; print "Total memory usage =", sum/1024, "MB" ;};' Number of processes = 1 Memory usage per process = 11237.8 MB Total memory usage = 11237.8 MB Java heap # jmap -heap 1 Attaching to process ID 1, please wait... Debugger attached successfully. Server compiler detected. JVM version is 24.55-b03 using thread-local object allocation. Garbage-First (G1) GC with 18 thread(s) Heap Configuration: MinHeapFreeRatio = 10 MaxHeapFreeRatio = 20 MaxHeapSize = 10737418240 (10240.0MB) NewSize = 1363144 (1.2999954223632812MB) MaxNewSize = 17592186044415 MB OldSize = 5452592 (5.1999969482421875MB) NewRatio = 2 SurvivorRatio = 8 PermSize = 20971520 (20.0MB) MaxPermSize = 85983232 (82.0MB) G1HeapRegionSize = 2097152 (2.0MB) Heap Usage: G1 Heap: regions = 2560 capacity = 5368709120 (5120.0MB) used = 1672045416 (1594.586769104004MB) free = 3696663704 (3525.413230895996MB) 31.144272834062576% used G1 Young Generation: Eden Space: regions = 627 capacity = 3279945728 (3128.0MB) used = 1314914304 (1254.0MB) free = 1965031424 (1874.0MB) 40.089514066496164% used Survivor Space: regions = 49 capacity = 102760448 (98.0MB) used = 102760448 (98.0MB) free = 0 (0.0MB) 100.0% used G1 Old Generation: regions = 147 capacity = 1986002944 (1894.0MB) used = 252273512 (240.5867691040039MB) free = 1733729432 (1653.413230895996MB) 12.702574926293766% used Perm Generation: capacity = 39845888 (38.0MB) used = 38884120 (37.082786560058594MB) free = 961768 (0.9172134399414062MB) 97.58628042120682% used 14654 interned Strings occupying 2188928 bytes. Are my expectations wrong? What should I expect? I need the heap space to be able to grow during spikes (to avoid very slow Full GC), but I would like to have the resident set size as low as possible the rest of the time, to benefit the other processes running on the server. Is there a better way to achieve that? Linux 3.13.0-32-generic x86_64 java version "1.7.0_55" Running in Docker version 1.1.2 Java is running elasticsearch 1.2.0: /usr/bin/java -Xms5g -Xmx10g -XX:MinHeapFreeRatio=10 -XX:MaxHeapFreeRatio=20 -Xss256k -Djava.awt.headless=true -XX:+UseG1GC -XX:MaxGCPauseMillis=350 -XX:InitiatingHeapOccupancyPercent=45 -XX:+AggressiveOpts -XX:+UseCompressedOops -XX:-OmitStackTraceInFastThrow -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintClassHistogram -XX:+PrintTenuringDistribution -XX:+PrintGCApplicationStoppedTime -XX:+PrintGCApplicationConcurrentTime -Xloggc:/opt/elasticsearch/logs/gc.log -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/opt elasticsearch/logs/heapdump.hprof -XX:ErrorFile=/opt/elasticsearch/logs/hs_err.log -Des.logger.port=99999 -Des.logger.host=999.999.999.999 -Delasticsearch -Des.foreground=yes -Des.path.home=/opt/elasticsearch -cp :/opt/elasticsearch/lib/elasticsearch-1.2.0.jar:/opt/elasticsearch/lib/*:/opt/elasticsearch/lib/sigar/* org.elasticsearch.bootstrap.Elasticsearch There actually are 5 elasticsearch nodes, each in a different docker container. All have about the same memory usage. Some stats about the index: size: 9.71Gi (19.4Gi) docs: 3,925,398 (4,052,694)

    Read the article

  • Linux Mint 14 severe overheating

    - by agvares
    I've tried switching to Mint (it was Mint 12) about 6 months ago, but failed to do it due to enormous overheating which made it virtually impossible to run any applications more complex than Gedit. Time had passed, and now I'm back again with Mint 14, but feeling way more determined. What I face are the following issues: 1) Great overheating (and by great I mean that just by doing nothing my CPU temp is floating around 70-75 C, which I find a lot) 2) Running multiple applications (let's say Chrome, Skype and Pidgin) results in critical overheating and immediate shutdown of the system 3) Due to the stuff listed above, my battery drains in about 10-15 minutes, pretty much turning my laptop into a crippled desktop machine I've got a HP-dv6 laptop (i7, 6gb RAM, dual graphics) Here's the output of lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) what i've tried to do already: 1) I've edited my grub file to add some "splash" arguments there 2) Installed jupiter and powertop 3) Tried to upgrade to newer kernels (up to 3.8), btw running anything newer than 3.5 results in both resolution and wi-fi detection fail 4) Read lots of forum threads devoted to the topic So, my question is simple: What else might I do to become finally able to use Mint as my default OS without the risk of being burned alive by the CPU heat?

    Read the article

  • Deleting an undeletable Directory in Windows 7

    - by Kaizen
    I have encountered a problem from time to time but have not been able to resolve it without formatting. I have a directory called d:\DotNet that I want to delete. I cannot because inside this folder there is another folder called: T4 Code generation and Misc. When I try to deleting or access T4 Code generation and Misc., I get the following error: Could not find this item This is no longer located in D:\DotNet. Verify this item's location and try again. Hopefully this is a simple fix.

    Read the article

  • What are good replacements for Microsoft Visio 2003?

    - by James
    I have been using Visio 2003 on Windows XP for generation of UML diagrams. I have encountered following problems so far: There is no way to generate/print the documentation written for class attributes/methods. No automatic code generation is supported I have already generated lot of diagrams and i discovered above problems at much later stage. Now i would like to overcome above by choosing another tool which is compatible with Visio file(.vsd) which saves time or redrawing all diagrams and also provides above features. Could you kindly suggest an alternative (visio compatible) tool ? (I have looked at a similar SU-question, but it does not suggest tools which provide solution to above problems. I am open to free as well as licensed tools, with priority to free :) ) Thanks, James

    Read the article

  • How does java permgen relate to code size

    - by brad
    I've been reading a lot about java memory management, garbage collecting et al and I'm trying to find the best settings for my limited memory (1.7g on a small ec2 instance) I'm wondering if there is a direct correlation between my code size and the permgen setting. According to sun: The permanent generation is special because it holds data needed by the virtual machine to describe objects that do not have an equivalence at the Java language level. For example objects describing classes and methods are stored in the permanent generation. To me this means that it's literally storing my class def'ns etc... Does this mean there is a direct correlation between my compiled code size and the permgen I should be setting? My whole app is about 40mb and i noticed we're using 256mb permgen. I'm thinking maybe we're using memory that could be better allocated to dynamic code like object instances etc...

    Read the article

  • How to force-restart a PC with vPro technology?

    - by Dan Nissenbaum
    I would like to know how to force-restart a PC that has crashed/hung and become completely non-responsive, using 2nd-generation vPro technology. Assume there is a second, fully responsive PC on the same LAN that can be accessed remotely to assist. Specifically, I am considering purchasing a PC with an i7-2860QM CPU, which is vPro-enabled (according to Intel). Here are two links that indicate it should be possible to force-restart a hung system with a 2nd-generation vPro-enabled CPU: Seconds 24-39 of What Is Intel vPro™ Technology? Page 17 (21 of the PDF) of Intel® vPro™ Technology: Reference Guide However, after extensive research, I cannot find a straightforward and trustworthy source of confirmation that this will actually work as I describe, or any documentation about how to set it up. I would appreciate both a reliable confirmation, and a source of documentation. This question is a follow-up to: Wake-on-LAN (WOL) fails after computer crashes (Windows 7 64-bit).

    Read the article

  • Why is the server performance so poor? What can be done to improve the speed of the server?

    - by fslsyed
    Very slow processing using Windows Server2008 R2 Standard with Service Pack One. Situation: Read a text file using the text data to populate a series of MS Sql tables. The converted data is used to generate monthly PDF invoice files; the PDF files are saved directly to the hard drive. The application is multi-threading with one thread used for the text conversion and three threads for PDF invoice generation. The text conversion is occurring concurrently with the invoice generation. Application Software: C# using Microsoft Visual Studio 2010 Ultimate. Crystal Report Writer 2011 with runtime 13_0_3 64 bit version. Targeted platform is x64; also tested as x86, and Any CPU with similar results. Microsoft .NET Framework 4.0. Microsoft Sql 2008 Issue: The software is running very slowly. The conversion of the text file is approximately six hundred fifty records per second and generation of the PDF files is approximately twelve invoices per minute. The text file to be converted is six hundred Meg with seven thousand invoices to be generated. The software was installed on three different machines from the same distribution files. The same text file was converted on each machine. The user executing the application was an administrator on each machine. The only variances were the machine and operating system. The configurations are as follows: Server: Operating System: Windows Server2008 R2 Standard 64-bit (6.1, Build7601) SP1 Service Pack: System Manufacturer: IBM System Model: System x3550 M3-[7944AC1]- BIOS: Default System BIOS Processor: Intel® Xeon® CPU E5620@ 2.4GHz (16 CPUs) Memory: 16384MB Notebook: Operating System: Windows 7 Home Premium Standard 64-bit (6.1, Build7601) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv7 Notebook PC BIOS: Default System BIOS Processor: AMD Phenom II N640 Dual-Core Processor 2.9GHz (2 CPUs) Memory: 6144MB Desktop: Operating System: Windows 7 Professional 64-bit (6.1, Build7601) SP1 System Manufacturer: Dell Inc. System Model: OptiPlex 960 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11 Processor: Intel Core™2 Quad CPU Q9650 @3.00GHZ (4 CPUs) Memory: 16384MB Processing results per machine: The applications were executed seven times with the averages being displayed below. Machine Text Records Invoices Generated Converted Per Minute Per Minute Server (1) 650 12 Notebook 980 17 Desktop 2,100 45 (1) The server is dedicated to execution of this application; no additional applications are being executed. Question: Why is the server performance so poor? What can be done to improve the speed of the server?

    Read the article

  • Fedora 16 Running Hot

    - by sdasdadas
    Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

    Read the article

  • Parallelism in .NET – Introduction

    - by Reed
    Parallel programming is something that every professional developer should understand, but is rarely discussed or taught in detail in a formal manner.  Software users are no longer content with applications that lock up the user interface regularly, or take large amounts of time to process data unnecessarily.  Modern development requires the use of parallelism.  There is no longer any excuses for us as developers. Learning to write parallel software is challenging.  It requires more than reading that one chapter on parallelism in our programming language book of choice… Today’s systems are no longer getting faster with each generation; in many cases, newer computers are actually slower than previous generation systems.  Modern hardware is shifting towards conservation of power, with processing scalability coming from having multiple computer cores, not faster and faster CPUs.  Our CPU frequencies no longer double on a regular basis, but Moore’s Law is still holding strong.  Now, however, instead of scaling transistors in order to make processors faster, hardware manufacturers are scaling the transistors in order to add more discrete hardware processing threads to the system. This changes how we should think about software.  In order to take advantage of modern systems, we need to redesign and rewrite our algorithms to work in parallel.  As with any design domain, it helps tremendously to have a common language, as well as a common set of patterns and tools. For .NET developers, this is an exciting time for parallel programming.  Version 4 of the .NET Framework is adding the Task Parallel Library.  This has been back-ported to .NET 3.5sp1 as part of the Reactive Extensions for .NET, and is available for use today in both .NET 3.5 and .NET 4.0 beta. In order to fully utilize the Task Parallel Library and parallelism, both in .NET 4 and previous versions, we need to understand the proper terminology.  For this series, I will provide an introduction to some of the basic concepts in parallelism, and relate them to the tools available in .NET.

    Read the article

  • Oracle Linux Delivers Top CPU Benchmark Results on Sun Blades

    - by sergio.leunissen
    From the Performance and Best Practices blog: Fresh SPEC CPU2006 results for Sun Blade X6275 M2 Server Modules running Oracle Linux 5.5. The highlights: The dual-node Sun Blade X6275 M2 server module, equipped with two Intel Xeon X5670 2.93 GHz processors per node and running the Oracle Enterprise Linux 5.5 operating system delivered the best SPECint_rate2006 and SPECfp_rate2006 benchmark results for all systems with Intel Xeon processor 5000 sequence. With a SPECint_rate2006 benchmark result of 679, the Sun Blade X6275 M2 server module, with two compute nodes per blade, delivers maximum performance for space constrained environments. Comparing Oracle's dual-node blade to HP's dual-node blade server, based on their single node performance, the Sun Blade X6275 M2 server module SPECfp_rate2006 score of 241 outperforms the best published HP ProLiant BL2X220c G5 server score by 3.2x. A single node of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 37% improvement in SPECint_rate2006 benchmark results and 22% improvement in SPECfp_rate2006 benchmark results compared to the previous generation Sun Blade X6275 server module. Both nodes of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 59% improvement on the SPECint_rate2006 benchmark and 40% improvement on the SPECfp_rate2006 benchmark compared to the previous generation Sun Blade X6275 server module.

    Read the article

  • Generate webservice proxy using oracle ant tasks

    - by adrian.muraru
    Proxy generation tends to be very slow when done using jdeveloper wizard and even more this time increases when jdeveloper is started over a remote desktop connection. So here's step-by-step howto that can be used to generate webservice proxy from your *nix shell Create a dir in your scratch area : e.g. /tmp/<username>/genproxy Get build.xml file attached, save it in the dir above and change the properties defined in it to match your ws endpoint. More specifically you need to edit: proxy.wsdl - the path (either locally or URL) where WSDL file can be accessed from proxy.handler - the handler class proxy.package - the class package where the proxy will be generated Start a new shell session (out of the ADE view if you're using one) and set the environment needed for proxy generation using ant and Oracle WebServicesAssembler genProxy [1] $ setenv ORACLE_HOME /opt/jdev_local/10.1.3/ $ setenv PATH $ORACLE_HOME/ant/bin:$PATH Note that the above env setup is needed even if you already have ORACLE_HOME set and ant utiliy available in your PATH. That way you'll be sure the proxy will be generated using the same libraries your jdeveloper is using in its wizard Generate proxy $ cd /tmp/<username>/genproxy $ ant genproxy And voila, the proxy files should be available in ./src directory. Notes: [1] More information about genProxy can be found at : http://download.oracle.com/docs/cd/B32110_01/web.1013/b28974/wsassemble.htm#CHDJJIEI [2] In my case this method is much faster then using the jdeveloper wizard (15secs compared to 25minutes) [3] There is one minor drawback though, the jdeveloper .proxy configuration file is not generated. -Adrian

    Read the article

  • InvalidProgramException Running Unit Test (Bug Closed)

    - by Anthony Trudeau
    In a previous post I reported an InvalidProgramException that occurs in a certain circumstance with unit tests involving accessors on a private generic method.  It turns out that Bug #635093 reported through Microsoft Connect will not be fixed. The reason cited is that private accessors have been discontinued.  And why have private accessors been discontinued?  They don't have time is the reason listed in the blog post titled "Generation of Private Accessors (Publicize) and Code Generation for Visual Studio 2010". In my opinion, it's a piss poor decision to discontinue support for a feature that they're still using within automatically generated unit tests against private classes and methods.  But, I think what is worse is the lack of guidance cited in the aforementioned blog post.  Their advice?  Use the PrivateObject to help, but develop your own framework. At the end of the day what Microsoft is saying is, "I know you spent a lot of money for this product.  I know that you don't have time to develop a framework to deal with this.  We don't have time and that is all that's important."

    Read the article

  • 2D Procedural Terrain with box2d Assets

    - by Alex
    I'm making a game that invloves a tire moving through terrain that is generated randomly over 1000 points. The terrain is always a downwards incline like so: The actual box2d terrain extends one screen width behind and infront of the circular character. I'm now at a stage where I need to add gameplay elements to the terrain such as chasms or physical objects (like the demo polygon in the picture) and am not sure of the best way to structure the procedural generation of the terrain and objects. I currently have a very simple for loop like so: for(int i = 0; i < kMaxHillPoints; i++) { hillKeyPoints[i] = CGPointMake(terrainX, terrainY); if(i%50 == 0) { i += [self generateCasmAtIndex:i]; } terrainX += winsize.width/20; terrainY -= random() % ((int) winsize.height/20); } With the generateCasmAtIndex function add points to the hillKeyPoints array and incrementing the for loop by the required amount. If I want to generate box2d objects as well for specific terrain elements, I'll also have to keep track of the current position of the player and have some sort of array of box2d objects that need to be created at certain locations. I am not sure of an efficient way to accomplish this procedural generation of terrain elements with accompanying box2d objects. My thoughts are: 1) Have many functions for each terrain element (chasm, jump etc.) which add elements to be drawn to an array that is check on each game step - similar to what I've shown above. 2) Create an array of terrain element objects that string together and are looped over to create the terrain and generate the box2d objects. Each object would hold an array of points to be drawn and and array of accompanying box2d objects. Any help on this is much appreciated as I cannot see a 'clean' solution.

    Read the article

  • Drivers for NVIDIA 520M not working in Ubuntu 12.04

    - by Don
    I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

    Read the article

  • Is meta description still relevant?

    - by Jeff Atwood
    I received this bit of advice about the meta description tag recently: Meta descriptions are used by Google probably 80% of the time for the snippet. They don’t help with rankings but you should probably use them. You could just auto generate them from the first part of the question. The description tag exists in the header, like so: <meta name="Description" content="A brief summary of the content on the page."> I'm not sure why we would need this field, as Google seems perfectly capable of showing the relevant search terms in context in the search result pages, like so (I searched for c# list performance): In other words, where would a meta description summary improve these results? We want the page to show context around the actual search hits, not a random summary we inserted! Google Webmaster Central has this advice: For some sites, like news media sources, generating an accurate and unique description for each page is easy: since each article is hand-written, it takes minimal effort to also add a one-sentence description. For larger database-driven sites, like product aggregators, hand-written descriptions are more difficult. In the latter case, though, programmatic generation of the descriptions can be appropriate and is encouraged -- just make sure that your descriptions are not "spammy." Good descriptions are human-readable and diverse, as we talked about in the first point above. The page-specific data we mentioned in the second point is a good candidate for programmatic generation. I'm struggling to think of any scenario when I would want the Google-generated summary, that is, actual context from the page for the search terms, to be replaced by a hard-coded meta description summary of the question itself.

    Read the article

  • Thank You MySQL Community! MySQL 5.6.9 Release Candidate Available Now!

    - by Rob Young
    The MySQL Community continues its good work in testing and refining MySQL 5.6, and as such the next iteration of the 5.6 Release Candidate is now available for download.  You can get MySQL 5.6.9 here (look under the "Development Releases" tab).  This version is the result of feedback we have gotten since MySQL 5.6.7 was announced at MySQL Connect in late September. As iron sharpens iron, Community feedback sharpens the quality and performance of MySQL so please download 5.6.9 and let us know how we can improve it as we move toward the production-ready product release in early 2013. MySQL 5.6 is designed to meet the agility demands of the next generation of web apps and services and includes across the board improvements to the Optimizer, InnoDB performance/scale and online DDL operations, self-healing Replication, Performance Schema Instrumentation, Security and developer enabling NoSQL functionality.  You can learn all the details and follow MySQL Engineering blogs on all of the key features in this MySQL DevZone article. On a related note, plan to join this week's live webinars to learn more about MySQL 5.6 Self-Healing Replication Clusters and Building the Next Generation of Web, Cloud, SaaS, Embedded Application and Services with MySQL 5.6.  Hurry!  Seating is limited!  As always, thanks for your continued support of MySQL!

    Read the article

  • Why Wifi no longer works 12.04.1

    - by Roger
    starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

    Read the article

  • Oracle Exadata X3 announcement at Oracle Openworld

    - by Javier Puerta
    Oracle Announces Oracle Exadata X3 Database In-Memory MachineOracle Press ReleaseFourth Generation Exadata X3 Systems are Ideal for High-End OLTP, Large Data Warehouses, and Database Clouds; Eighth-Rack Configuration Offers New Low-Cost Entry Point During his opening keynote address at Oracle OpenWorld, Oracle CEO, Larry Ellison announced the Oracle Exadata X3 Database In-Memory Machine - the latest generation of its Oracle Exadata Database Machines. The Oracle Exadata X3 Database In-Memory Machine is a key component of the Oracle Cloud. Oracle Exadata X3-2 Database In-Memory Machine and Oracle Exadata X3-8 Database In-Memory Machine can store up to hundreds of Terabytes of compressed user data in Flash and RAM memory, virtually eliminating the performance overhead of reads and writes to slow disk drives, making Exadata X3 systems the ideal database platforms for the varied and unpredictable workloads of cloud computing. In order to realize the highest performance at the lowest cost, the Oracle Exadata X3 Database In-Memory Machine implements a mass memory hierarchy that automatically moves all active data into Flash and RAM memory, while keeping less active data on low-cost disks. With a new Eighth-Rack configuration, the Oracle Exadata X3-2 Database In-Memory Machine delivers a cost-effective entry point for smaller workloads, testing, development and disaster recovery systems, and is a fully redundant system that can be used with mission critical applications. Detailed info at Oracle Exadata Database Machine

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >