Search Results

Search found 2154 results on 87 pages for 'bios'.

Page 43/87 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • Ubunti 12.10 wake on lan not working with Realtek 8139

    - by f.cipriani
    My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

    Read the article

  • Bumblebee : Module bbswitch could not be loaded

    - by StepTNT
    I've upgraded to 12.04 and I had to switch from Ironhide to the latest version of Bumblebee. Now, when I try to run bumblebeed, I get this error: FATAL: Module bbswitch not found. [ERROR]Module bbswitch could not be loaded (timeout?) [WARN]No switching method available. The dedicated card will always be on. I don't really need to use the secondary VGA on Kubuntu, so I would like to find a way to definitely shut the discrete GPU down and avoid wasting battery. I can't disable it from the BIOS because I use it on Windows. My card is an nvidia 540M.

    Read the article

  • Unbutu 10.10 (MAVERICK) live cd booting?

    - by D3c3nt Boy
    I am user of window and i had keen to shift on LINUX so i made live cd of UNBUTU 10.10 (MAVERICK) THIS IS MY VERY FIRST TIME TO USE UNBUTU I put cd in cd drive and set bios setup and unbutu cd worked and logo of unbutu appear on screen but suddenly before start up screen it shows this Busy Box v 1.5 (Unbutu 1: 1.15.31 unbutu5) built in shell (ash) enter help for a list of built in commands When i type help and press enter the list of commands appear like below alias break cd chdir command continue echo eval exec export filse getopts hash help let local printf pwd read readonly return set shift source test This is my first time so i have no idea what to do i restart my pc several but it happens every time plz help me. what should i do? Sorry for my

    Read the article

  • Installation of 11.10 on new drive (no OS)

    - by Jeffrey Vincent
    I have a Dell Dimension 600 XPS Phoenix BIOS version A03, the original HD crashed and burned. Dell didn't send OS disks (was on the original drive and no back up disks), so I am trying to install Ubuntu 11.10 on the new drive. The new drive is a Western Digital 1TB. I formatted the new drive by putting it in an enclosure and formatting it with Windows 7 on my HP system. When I put the cd in the cdrom it boots to the cd with the Advanced user screen (won't boot into the usually Windows GUI). When I try to install (or run from live Cd) I get the same error message. Same with trying the various boot options. The message is: VFS: cannot open root device "(NULL)" or unknown-block(8,1) Please append a correct "root=" boot option: Here are the available partitions: Kernal Panic- not syncing: VFS: Unable to mount rootfs on unknown-block(8,1) and then it lists Trace messages then freezing. Any help or suggestions are appreciated in advance.

    Read the article

  • Install using a Logitech Keyboard and mouse with bluetooth dongle?

    - by Ryan
    I'm trying to install 12.10 on my system, but my mouse and keyboard are not working during installation. I use the Logitech MX5500 Bluetooth mouse+keyboard combo with a Bluetooth dongle. My keyboard and mouse work in my UEFI bios, and during the Windows 7/8 installation. My keyboard also works in the Ubuntu screen that allows me to set options, install, use the live cd, etc, before boot. I'm wondering if anyone knows a way to get this dongle working during the installation process so that I can actually install 12.10.

    Read the article

  • Loads wrong resolution when installing

    - by Kevin DB
    I'm trying to install Ubuntu 11.04 from a USB. My computer does load the USB file and I get some sort of BIOS-like screen where I can choose between 'Install from USB' and 'Boot-up from USB'. When I entered the corresponding number my screen resolution is totally messed up. I see that Ubuntu is starting up when I used Boot from USB, but the screen looks the same as you'd have a too high screen resolution. Same story with Install from USB. I can see the screens loading and the menu's and stuff, but not clearly because it load in a too high screen resolution. I'm trying to dual-boot is with Windows XP and max. screen resolution is 800x600.

    Read the article

  • Ubuntu installer doesn't see internal hard drive on DELL Vostro 3360

    - by valk
    I just received a new DELL Vostro 3360, it has Windows 7 preinstalled. When it comes to the partition window I can't see the hard drive there. I see only /dev/sda or /dev/sdb (either one and in both cases it's a usb drive from which I'm installing). I tried every imaginable BIOS configuration. Tried to change the SATA mode to ATA, DHCI and more. EDIT: I tried to install with standard Ubuntu 12.04 32 bit, and 11.10 64 bit official versions. No luck. I'll appreciate any suggestion.

    Read the article

  • Can't boot without Flash Drive plugged in

    - by vlad
    (Sorry for my bad English) I had Ubuntu 12.04 Beta installed on my computer. When 12.04 was finally released, I made a bootable USB Flash Drive using Startup Disk Creator. Then I decided to check if this drive works properly and to reinstall the system on my desktop. I must add, my desktop behaves a bit strange when it comes to bootable USB's, it recognizes them as HDD. In BIOS I changed priority of boot so USB Flash Drive (recognized as HDD) was first. Successfully booted, I installed Ubuntu. Everything worked fine, but... Now I cannot boot from my real HDD. Every time I want to boot, I put the USB Flash Drive into my computer, boot, safely remove it and everything works. What have I to do, to repair boot? Thank you for your time!

    Read the article

  • Crashing/freezing problems with an Aspire One 722

    - by tim
    After several annoying points with installing ubuntu 11.10 on my acer aspire one 722 i finally made this run. After installing i had freeze issues and solved them by putting network boot on first priority on the bios. Yesterday all worked fine, no problems with wlan etc. But today all is crashing down. Atm iam at the university and tried to log into the public wlan. With that came : i cannot shut down, terminal is not working, very slow perfomance, some apps are starting like libre office, some not like system manager, buttons are not reacting, wlan symbol is spinning all the time. Any suggestions i can do?

    Read the article

  • How to remap Fn key combinations (Lenovo G500)

    - by Anatoli
    I am running Kubuntu 13.10 on a Lenovo G500 laptop. My question is similar to this one: How can I remap my F keys on my HP laptop? That is to say, my F1-F12 keys are mapped to certain special functions, and only holding down the Fn key restores access to the standard F1-F12 keys. How do I remap certain keys? I would like to know if there is a way to remap Fx to Fn+Fx and vice-versa. As per the instructions of #87043 I checked my BIOS and there is no option to switch the Fx/Fn key functionality. Googling through Leonovo's support forums indicates a BIOS update enabling this is in the works, but there's no indication of when it will be complete. Using xev I was able to see what X sees when F1-F12 are pressed. Some send separate keycodes, but some are somehow mapped to key combinations or other unknown things: F1 - XF86AudioMute F2 - XF86AudioVolumeLower F3 - XF86AudioVolumeRaise F4 - Alt_L + F4 F5 - F5 F6 - Disables touchapd, cannot quite understand what xev tells me is happening, reenables if disabled (Kernel log reveals these have well-defined scancodes not assigned to any keycodes) F7 - XF86WLAN F8 - Alt_L + Ctrl_L + Tab F9 - Turns off LCD backlight, xev sees nothing F10 - Super_L + p F11 - XF86MonBrightnessLower F12 - XF86MonBrightnessRaise Following the instrusctions on this page: How do I remap certain keys? I remapped all the keys that have definite keycodes (F1, F2, F3, F5, F7, F11, F12) This still leaves the F4, F6, F8, F9, F10 keys not functioning properly. This is especially frustarting since F4, F6, F9 now kill the current window, the touchpad and screen, respectively. Any help on remapping these keys to their proper functions would be much appreciated! -Anatoli xev output for these 5 keys: F4 KeyPress event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674037, (228,298), root:(911,321), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 40, synthetic NO, window 0x4800001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4800001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 4294967197 0 0 0 0 0 0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674040, (228,298), root:(911,321), state 0x8, keycode 70 (keysym 0xffc1, F4), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674042, (228,298), root:(911,321), state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 40, synthetic YES, window 0x4800001, message_type 0x12a (WM_PROTOCOLS), format 32, message 0x12b (WM_DELETE_WINDOW) F6 disabling touchpad MappingNotify event, serial 40, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 40, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 F6 enabling touchpad MappingNotify event, serial 42, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 42, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 42, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 42, synthetic NO, window 0x0, keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 43, synthetic NO, window 0x0, request MappingPointer, first_keycode 0, count 0 F8 doing whatever it is F8 does KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508985, (13,-12), root:(696,11), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508986, (13,-12), root:(696,11), state 0x8, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508988, (13,-12), root:(696,11), state 0xc, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XmbLookupString gives 1 bytes: (09) " " XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508989, (13,-12), root:(696,11), state 0xc, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508991, (13,-12), root:(696,11), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508994, (13,-12), root:(696,11), state 0x0, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XFilterEvent returns: False F9 gives no output to xev F10 doing whatever it is F10 does KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586076, (9,-14), root:(692,9), state 0x0, keycode 10 (keysym 0x31, 1), same_screen YES, XLookupString gives 1 bytes: (31) "1" XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586552, (9,-14), root:(692,9), state 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586554, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XmbLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586557, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586560, (9,-14), root:(692,9), state 0x40, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

  • No dual boot option, no boot priority order

    - by Atul
    I installed Ubuntu yesterday. I partitioned my C: when it was asked to give memory allocation to Ubuntu. The version is 12.04. I was able to install Ubuntu completely: Ubuntu is successfully installed. Restart you computer. I restarted and there was no Ubuntu option. Windows 7 also asked for a boot repair. So I did that too. I then wanted to change my boot priority order to Ubuntu but couldn't find it in BIOS section. I allotted 20GB to Ubuntu and it is deducted from C: but I couldn't see the partitioned drive in Windows 7. Wubi was working fine before on PC with dual boot option. I used Linux Live key creator to boot my PC through pen drive.

    Read the article

  • Backlit keyboard on Toshiba Satellite P755-S5184 doesn't work in Ubuntu 12.04

    - by chrisabner23
    I have the keyboard backlight turned on in bios to timer setting (1 second). When laptop boots the backlight works, but once ubuntu begins to load the backlights turn off. There is a function key combo that is supposed to turn it on (Fn +Z), hitting that brings up a notification balloon showing the backlit keyboard icon but it is grayed out. I tried using KeyTouch to try and get the backlight working but my laptop model isn't on the list. I'm new to Ubuntu, and have been searching the web and can't seem to find any answers that will work for my particular situation. Any information would be MUCH appreciated. Thanks!

    Read the article

  • How to boot load the kernel using EFI stub (efistub) loader?

    - by Pro Backup
    I have Ubuntu 14.04 running in UEFI mode as only operating system, no dual-boot here. The kernel version is 3.13.0-24-generic. There is an EFI partition. In this case the EFI partition is not at the default /dev/sda1 but at /dev/sda3 because I did actually convert BIOS mode to EFI mode. I have used the grub-efi-amd64 package, though that actually loads GRUB boot menu from UEFI firmware boot menu (UEFI boot loads \EFI\ubuntu\grubx64.efi). I want to skip that double boot menu loading step, and boot faster, directly from UEFI into the kernel. The Ubuntu kernels since 12.10 have "Kernel EFI stub loader" feature. I know I do need to copy the Ubuntu kernel to the EFI partition (possibly rename) and create an entry in UEFI boot menu (for instance using efibootmgr). Which exact terminal commands are necessary to do this?

    Read the article

  • Ubuntu GUI crash when LightDM enters, unable to login

    - by Cesar
    This issue happened spounteniously, i don´t know what could have cause it as i wasn´t using the PC when it happened. I ruled out any messing around with the setting as the user doesn´t know how to enter the BIOS, doesn´t have the sudo password and was only using firefox and libreoffice when it happened. After the plymouth sequence i get this error. https://www.dropbox.com/s/uf1xdkqkw9alvcu/IMAG0252.jpg And this option: https://www.dropbox.com/s/tpivkgjkx2spa3v/IMAG0253.jpg I follow each option and nothing happens after that. The issue persist after rebooting. I choose the other options to see if anything happens, i either get back to option 1 or doesn´t show anything anormal. (I have pictures i someone wants to know) What i found weird is that event though the error is possitioned in the chip, however ubuntu 10.04 and 12.04 run fine in a live CD I saw that some people are having issues when LightDM has a non default wallpaper, but i use a default one. Thanks in advance.

    Read the article

  • Dual Monitor/Xinerama not working; cannot even detect on-board graphic card

    - by Steven H
    I have Kubuntu 12.04 and two identical VGA monitors. One I plugged via DVI-VGA adapter into the DVI port of my discrete AMD Radeon HD 6670, the other into the VGA port of my on-board graphic card (Radeon HD 6410D). After installing Kubuntu I got a black screen, so I booted with nomodeset and installed AMD's catalyst drivers but only the monitor plugged into the discrete graphic card worked. Using lspci I saw that the on-board graphics was not listed. Then I found in the BIOS settings the options "Surround View" and "Onboard Dual Link DVI" both disabled. After enabling both, the on-board graphics card shows up in lspci but in amdcccle, it only shows as [Uknown display]Uknown adapter. When I try to enable xinerama, I get a black screen after rebooting on both monitors. I tried several options and hints from the web but nothing worked so far. I also reinstalled the AMD drivers several times. What should I do?

    Read the article

  • Virtualbox will run from 32bit installation CD but not 64bit.

    - by MetaDark
    I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

    Read the article

  • How to repair GRUB from backup?

    - by titusjaka
    I have Windows 8 and Ubuntu 13.04 in dualboot. But the problem was that Windows didn't boot when GRUB is set as primary bootloader in BIOS. When the Windows EFI partition was checked as primary, Windows booted well. Then I decided to fix it and installed Boot-Repair. First of all, I made the backup. Then updated the GRUB. The update was successful. But then Windows and Ubuntu didn't boot at all. I've repaired GRUB using live-USB. Now I can boot Ubuntu, but Windows doesn't boot. How can I restore boot partitions from Boot-Repair backup (.zip file)?

    Read the article

  • Why is my fan constatnly blowing in Ubuntu?

    - by Derfder
    I have installed Ubuntu 13.04 (64-bits) alongside Windows 7 on different partition on my second desktop. It's working nice. I have updated everything. However, I have problems with my fan. It's blowing non-stop and very fast(loud). I haven't these problems in Windows 7 where it works nicely. How to update drivers for my fan or something else? My desktop is: HP Pro 3410 Microtower PC. Graphic card: AMD Radeon HD 6570 Board: 2A9C 1.1 Bus Clock: 133 megahertz BIOS: American Megatrends Inc. 6.14 11/05/2010 Processor: 3,20 gigahertz Intel Core i3 550 DRIVERS I HAVE TRIED FOR MY GRAPHIC CARD: I have tried these drivers so far: xserver-xorg-video-ati, version: 1:7.1.0-0ubuntu2 fglrx Version: 2:9.010-0ubuntu3 fglrx-updates Version 2:9.012-0ubuntu1 But the fan is still blowing like a maniac. I have tried to install Linux Mint 15 previously and I have had the same problems with the fan. Any idea how to fix it?

    Read the article

  • My Ubuntu LiveUSB won't boot after formatting it on Windows XP. HELP!

    - by Bigyellow Bastion
    I formatted because the Windows XP I was using wouldn't let me view the drive in the window without formatting first, so I just said what the heck. Turns out, after using the Linux USB creator, placing the ISO on disc properly and booting, BIOS hangs; no bootloader, no startup, nothing. Windows XP's formatting screwed something up with my USB's filesystem, and I'm uncertain of what to do. Help?! My business depends on me using an OS, so prompt ideas are a must and very appreciated(no money). PS: I checked the contents of the disc, and they are all okay.

    Read the article

  • Xubuntu is not seeing my Win8 OS in the installer

    - by Logan Serman
    When I install Xubuntu, I get the message "This computer currently has no detected operating systems. What would you like to do?". I just did a fresh install of Win8 yesterday, and I guess it used EFI because I have a 104MB partition that is of type 'efi'. Is there any way to install Xubuntu next to Win8, and avoid any boot problems? Or can I switch Win8 to BIOS from EFI, without having to re-install Windows? I went through a ton of boot problems and re-installing yesterday... I really don't want to have to do it again.

    Read the article

  • 64 bit Ubuntu sees half my RAM

    - by koehn
    This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

    Read the article

  • Ubuntu - Black Screen After Suspend

    - by EssAm
    I used Ubuntu with no problems and I upgraded to 11.10 and everything was fine. But when I did my first suspend I was not able to boot again, all I got was a black screen no bios screen, nothing just blank, I tried doing hard reset but when I power on again same happens. I tried ctrl+alt+delete F1-F12 but i think the keyboard is not working, also tried booting from CD but all I got was blank screen, the hard disk light is not blinking at all so i'm assuming it's not trying to boot. My laptop is Toshiba satellite with ATI Radeon graphics. Hibernate was working fine though. I searched the net for solutions but with no luck. Any ideas?

    Read the article

  • Get Creative soundcard working correctly

    - by schwiz
    I am trying to get sound going on my fresh install of 10.10. I have a creative fatlity branded sound card. My ALSA information. Most things seems to be working out of the box, once I turned off my onboard sound in my BIOS the soundcard kicked in. However, the system sounds aren't working (I love those drums and the road runner sound when you press backspace). Also, with a 7.1 setup my center channel and subwoofer don't work at all. All other channels are working like a champ. So I am trying to accomplish two things, get system sounds working and get center/sub channels working. How should I try to fix this?

    Read the article

  • Asus Eee PC 701 4G hangs on boot

    - by Andrew
    I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Install Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

    Read the article

  • Dual booting Ubuntu 12.04: UEFI and Legacy

    - by cmhughes
    I'm trying to dual boot Ubuntu 12.04 (or 12.10) with Windows 8 on a new Sony Vaio, but have run into some problems :) Specifically, my problems seem to come from choosing UEFI or Legacy as the Bootmode in the BIOS. Here is what I have found so far: Windows 8 needs to boot using UEFI, and doesn't work in Legacy mode Ubuntu (both 12.04 and 12.10) needs to boot using Legacy, and won't boot (at least from the live disk) in UEFI mode I have been able to boot Ubuntu using a live USB disc, provided that I change the Bootmode to Legacy. I haven't committed to installing it yet, because I don't really understand the consequences. My main concerns are that instead of simply selecting Windows or Ubuntu in Grub, I would also have to change my Bootmode every single time, which seems like a lot more trouble than it should be. So, the question: how can I install Ubuntu 12.04 or 12.10 in UEFI boot mode?

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >