Search Results

Search found 3516 results on 141 pages for 'chris valentine'.

Page 43/141 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

  - by Chris Beach

  This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

  Read the article

• Prevent Explorer From Expanding Network Folders when in Folders View

  - by Chris

  When you are browsing a network share and there are over 1000 folders in the root (like at work), is there a way to prevent Explorer from expanding all the Folders when you have the "Folders" view enabled? Explorer will open the folder your double clicked on, and show that in the right navigation pane, and it's great, but wait about five seconds and the rest of the folder list pops into view, I'd rather that not happen. There is only one folder I'm interested in (or have access to), and it's annoying waiting for Explorer to load the rest of the files.

  Read the article

• XBMC won't live boot

  - by Chris

  I'm trying to run XBMC on a Dell Dimension 4300S (stock parts). I cannot get it to finish a live boot. It gets stuck on "restarting openbsd secure shell server sshd" [see picture]. Any ideas?

  Read the article

• "Steam needs to be online to update" - 404 fetching *_osx.zip.*

  - by Chris Boyle

  Since yesterday evening, when I launch Steam on OSX, a self-update progress bar appears instead (at 0 of 30MB or so). This bar does not advance, an error dialog appears: Steam needs to be online to update Please confirm your network connection and try again. The app then exits. This happens whether wifi or ethernet or both are connected, and pings to the outside world succeed throughout. If I look at the logs in Console, they are very similar to this example (though that's not mine). Specifically: Success! http://store.steampowered.com/public/client/steam_client_osx?date=718277 [...] Failed! http://cdn.store.steampowered.com/public/client/breakpad_osx.zip.27f59114a86fcd50533e1d7b128f9300947f9969 Failed! http://cdn.store.steampowered.com/public/client/steam_osx.zip.11a99384214805f2dd3be5084ba6be61d662f8ac Failed! http://cdn.store.steampowered.com/public/client/miles_osx.zip.d9fb546541f59c1fdd03962a605236b1021abab8 Requesting the first URL successfully returns some data including the filenames of the latter three, and requesting any of those gives me a 404 (I've tried multiple clients on multiple continents). Searches on Google and Twitter show about 10-20 others having this problem in the past 24 hours, but hardly the angry mob I'd expect if the problem affected all Steam OSX users. Things that have already been tried with no effect: Switching between wifi and ethernet. Killing all Steam processes including ipcserver. Moving the ~/Library/Application Support/Steam/registry.vdf file away. Requesting those URLs with other clients and from other locations. Interesting: that first URL with the date parameter returns the same content even without that parameter (thus would lead to the same 404s) suggesting that the problem is not necessarily specific to coming from a particular currently-installed version of Steam.

  Read the article

• Windows 7 Enterprise MAK needs Reactivation?

  - by chris

  I have a VMware image that contains our "standard workstation" where I do a lot of testing. I used a Windows 7 Enterprise MAK key (from MSDN) for activation because the doc said that MAK keys don't have to be reactivated when the hardware changes. Activation was done with slmgr.vbs /ipk LICENSE-KEY slmgr.vbs /ato Now after some testing where the virtual hw was changed it says it "needs to activate because the hw has changed". What did I do wrong?

  Read the article

• Adobe Coldfusion Railo OpenBD Apache Tomcat Multiple Sites

  - by chris hough

  Here's what I am trying to do, unless I am crazy: I am trying to use Tomcat with the multiple workers, so far I got OpenBD working, but having trouble with Railo, and will be tackling Adobe after. each engine deployed as a war separated by different workers I wanted to keep both the sites and engines inside my sites directory I have to remap the symlink for the WEB-INF when I switch engines = have not found a way around this my thought is to have everything separated into modules and I want to be able to execute both cfm and php code in a single site.  Ideally, it would be amazing if there would be a way to not have to remap the symlink as well. thoughts? can this be done? I am trying to mimic how this would be setup on a live server, not using eclipse for example. here is what I am working with so far: my apache workers.properties worker.list=openbd, openbdadmin, railo, railoadmin  worker.openbd.type=ajp13  worker.openbd.host=local.mydev.openbd  worker.openbd.port=8009 worker.openbdadmin.type=ajp13  worker.openbdadmin.host=local.admin.openbd worker.openbdadmin.port=8009   worker.railo.type=ajp13  worker.railo.host=local.mydev.railo  worker.railo.port=8009 worker.railoadmin.type=ajp13  worker.railoadmin.host=local.admin.railo worker.railoadmin.port=8009   my tomcat servers.xml < Host name="local.admin.openbd" appBase="/Users/[myusername]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="openbd/" reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host        < Host name="local.admin.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="railo/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host < Host name="local.mydev.openbd"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true"< /Context < /Host < Host name="local.mydev.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host my apache vhosts ServerName local.admin.openbd DocumentRoot /Users/[my username]/Websites/coldfusion.engines/openBD/ #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbdadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_openbdadmin_error.log" ServerName local.admin.railo DocumentRoot /Users/[my username]/Websites/coldfusion.engines/railo/ #Mount Railo and tell it to only server cfml files JkMount /*.cfm railoadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_railoadmin_error.log" ServerName local.mydev DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_error.log" ServerName local.mydev.openbd DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbd ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_openbd_error.log" ServerName local.mydev.railo DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot JkMount /*.cfm railo ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_railo_error.log" my folder structure I am using websites/apache.logs/ websites/coldfusion.engines/ websites/coldfusion.engines/cfusion/ websites/coldfusion.engines/openBD/ websites/coldfusion.engines/railo/ websites/example.mydev/ websites/example.mydev/wwwroot/ websites/example.mydev/wwwroot/index.cfm   websites/example.mydev/wwwroot/index.htm   websites/example.mydev/wwwroot/index.php   error log output [Thu Aug 27 00:54:50.443 2009] [11279:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:54:51.346 2009] [11280:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (openbdadmin) connecting to tomcat failed. [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=openbdadmin [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (railoadmin) connecting to tomcat failed. [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=railoadmin

  Read the article

• Reverse SSH Tunnel

  - by chris

  I am trying to forward web traffic from a remote server to my local machine in order to test out some API integration (tropo, paypal, etc). Basically, I'm trying to setup something similar to what tunnlr.com provides. I've initiated the ssh tunnel with the command $ssh –nNT –R :7777:localhost:5000 user@server Then I can see that server has is now listening on port 7777 with user@server:$netstat -ant | grep 7777 tcp 0 0 127.0.0.1:7777 0.0.0.0:* LISTEN tcp6 0 0 ::1:7777 :::* LISTEN $user@server:curl localhost:7777 Hello from local machine So that works fine. The curl request is actually served from the local machine. Now, how do I enable server.com:8888 to be routed through that tunnel? I've tried using nginx like so: upstream tunnel { server 0.0.0.0:7777; } server { listen 8888; server_name server.com; location / { access_log /var/log/nginx/tunnel-access.log; error_log /var/log/nginx/tunnel-error.log; proxy_pass http://tunnel; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } From the nginx error log I see: [error] 11389#0: *1 connect() failed (111: Connection refused) I've been looking at trying to use iptables, but haven't made any progress. iptables seems like a more elegant solution than running nginx just for tunneling. Any help is greatly appreciated. Thanks!

  Read the article

• SQL Server 2008 - "Enhanced read-ahead and scan"?

  - by Chris J

  Hi all, Can anyone point me to, or does anyone know what this "feature" of SQL Server is? Googling for it (also for "Super scan" which seems to be a synonym for the feature) reveals no information other than all the edition comparison pages that exist out there for SQL Server. I'm also not sure whether this is a stackoverflow or a serverfault question. I'll try here on serverfault first, but if folk think stackoverflow may be a better forum, drop me a comment to that effect - ta :-)

  Read the article

• How to boot Linux from a 16gb USB flash drive

  - by Chris Harris

  I'm trying to install Linux on a single partition of a USB flash drive that's larger than 4gb. The first place I went to is http://pendrivelinux.com. I can follow these instructions for installing Xubuntu 9.04 perfectly, which unfortunately break down when I try to scale it up beyond 4gb. There are several other tools to do this (unetbootin and usb-creator) which follow a very similar formula. I figured out that a big problem of mine was that all of these tools assume the USB drive is formatted in FAT32, which unfortunately cannot hold a single file larger than 4gb. This is unfortunate because I want to use just one partition, so that my persistance file, casper-rw, looks like one big partition to the OS once I've booted off of the USB drive. I then tried following a myriad of instructions involving formatting the drive as one large ext2 filesystem and using extlinux to create a single bootable ext2 file system. This doesn't work for me however, after about 20 attempts verifying and slightly tweaking the formula, I cannot seem to get a "good" bootable ext2 file system built. I'm not entirely sure what's going on, but it seems as though no matter how hard I try, I cannot get the ext2 file system to remain coherent after copying the Linux ISO contents over, copying the MBR, and executing extlinux to create the ext bootloader. Every time, after I follow these steps (in any order) and reboot, I get an unbootable USB drive. If I then mount the drive under Linux again, I see a mess of a file system (inodes have clearly been screwed up somewhere along the way). I suspected that the USB drive wasn't being fully flushed, so I tried using the "sync" and "unmount" commands before rebooting which didn't affect things at all. I guess I have several possible questions - but let's start with the obvious - is there something I'm missing to create a bootable ext2 USB flash drive that's large (e.g. 16gb)?

  Read the article

• Mac OS X 10.6 issues connecting via vpn to Microsoft server

  - by chris hough

  I am currently running Mac OS X Snow Leopard and trying to use the native vpn client to connect to our Microsoft vpn server. If I route all traffic via the vpn connection I am able to connect to our servers, however, external traffic to i.e. google or stack overflow is blocked. If I uncheck the checkbox to route all traffic via the vpn I can connect to the vpn, however, I can not connect to my servers, external traffic to google or stackoverflow works though. Is this a vpn client issue, do I need to purchase Mac OS X vpn software instead of the native client, or is there a Microsoft vpn server setting that has to be checked. I am not familiar with the server software, but I wanted to post this question here to help out our network admin with the Mac OS X machines.

  Read the article

• Zantaz's EAS exchange archive product doesn't integrate with Outlook in Windows 7

  - by Chris Farmer

  I work at a place that uses Exchange with Outlook for mail, and they also use a product from Zantaz called "EAS" which does server-side archiving of old messages. One of the artifacts of this archival is that email attachments are missing from the archived messages when viewed in Outlook. EAS has a client tool that plugs into Outlook that enables easy retrieval of those archived messages and their attachments, but it doesn't seem to work when installed on Windows 7. I have no direct evidence of this, other than that it simply doesn't work on my Windows 7 machine, and some of our network support staff seem to corroborate this. The symptom is that Outlook seems to know nothing of the existence of this EAS app. The EAS app also has a system tray icon which is there and offers some minimal functionality, but the real goodness is the Outlook integration, which I sorely miss. So, my question is this: does anyone here know whether it's possible to coerce this EAS product into working correctly in Windows 7?

  Read the article

• Problem with regsvr32 on Windows Server 2010

  - by Chris Anton

  Hi all! I am attempting to register a basic COM dll on a Windows Server 2008 standard box. I run regsvr32 capicom.dll and it reports DllRegisterServer in capicom.dll succeeded. This is the same process we've used for years on Windows Server 2003. Sadly, when I attempt to create the object via a very very basic Microsoft vbscript example Set oStore = CreateObject("CAPICOM.Store") it throws a "ActiveX component can't create object" error. Thinking maybe it was a problem with this dll, I tried a few other DLLs we use with the same result. I tried using the regsvr32 in system, system32, and syswow64 all with the same result. I don't know too much about the differences between each of those, but figured it was worth a shot. The dll is being stored on the d:\ and seems to have correct permissions (though that'd be a different error altogether). Thanks to any help or thoughts you might have!

  Read the article

• What is the deal with hard drive technology moving to 4K sectors, vs. 512 bytes? Are 4K sector disk

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• RRAS VPN Server on Windows 2008 Behind NAT

  - by Chris

  Ok, so I have kind of a funky setup, let me see if I can describe it. I have a single VMware host with a public IP address 74.xx.xx.x Inside that host, I have 3 VM's Web Server - 1 NIC - 192.168.199.20 SQL Server - 1 NIC - 192.168.199.30 RRAS/VPN Server - 2 NICs 192.168.199.40 & 192.168.199.45 Due to Limitations of my ISP, all of the VM's are connected to the host VIA NAT. I have NAT setup for the webserver so all incoming requests on 74.xx.xx.x via port 80 route to 192.168.199.20. This works fine. Now I want to set up a Windows 2008 VPN server inside this NAT network and forward the correct traffic to it. My questions are as follows? What are the TCP/UDP ports that i have to forward? What special configuration is needed on the server and clients since this is behind a NAT Any other advice would be wonderful.

  Read the article

• Server 2008 slow home page load in Internet Explorer

  - by Chris

  I have a problem with Internet Explorer for all users. On startup the home page takes around 20-30 seconds to load. This includes servers such as the Domain Controller and Terminal Server. However once the home page has loaded all pages from then on run fine. If you close and then reopen Internet Explorer the same thing happens. Any suggestions?

  Read the article

• Virutal Machine loses network connectivity on Hyper V Cluster

  - by Chris W

  We're running a number of VMs on a 6 node failover cluster of blades using Hyper V. We have an intermittent issue (every few days at different times - not a fixed frequency) of VMs losing network connectivity. Console access to the VM suggests all is fine and the underlying blade has normal connectivity. To resolve the problem we either have to re-start the VM or, more usually, we do a live migration to another blade which fires up connectivity and we then migrate it back to the original blade. I've had 3 instances of this happen with a specific VM running on a particular blade however it has happened once with a different VM running on a different blade. All VMs and blades have the same basic setup and are running Windows 2008 R2. Any ideas where I should be looking to diagnose the possible causes of this problem as the event logs provide no help? Edit: I've checked that each blade is running the latest NIC drivers and all seem to be fine. Something that is confusing me - a failover or restart of the VM resolves the issue. Whilst I need to work out the underlying issue that is causing the NICs to hang I'm also concerned that the VM didn't failover to another node which would have solved the outage for me. Is there a way to configure the cluster so that it can tell that the VM guest has lost connectivity and fail it over? As things stand the cluster is assuming that the VM is running happily as I presume Hyper V says everything is great even though there is a problem.

  Read the article

• Hyper V Server 2012 Remote Management Using Workgroup

  - by Chris Kolenko

  I'm trying to remotely manage Hyper V server 2012 from a windows 8 pc, both client and server are on a workgroup. I've spent about 3-4 hours trying to get this working with no luck so far trying the following: Creating a new administrator on the server with the same details as the client ie. username / password. Add an entry into my hosts file to point to the remote ip by server name. Tried using HVRemote. Disabled both firewalls. The error that I'm getting is RPC Service Unavailable. How can I accomplish what I'm trying to do? Update Some of the operations on the Hyper-V Manager work. IE. Virtual Switch Works. I can open the New VM Wizard. I run into an error when creating a new Virtual Hard Disk tho. I've tried creating a VM without a hard disk, which works. Using the new hard disk wizard does not work either. I still can not see any Virtual Machines. RPC server unavailable. Unable to establish communication between 'ServerName' and 'ClientName'

  Read the article

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• Epson Stylus C84 Won't Print

  - by Chris

  The printer won't print with empty color cartridges. I want to print only black ink. From what I've read so far the Epson Stylus C84 won't print like this because it uses a little bit of color in even when you print only in black to prevent the ink heads from drying out. Is there ANY way that I can bypass this?

  Read the article

• Blocking an IP range without using .htaccess

  - by Chris

  I have a WordPress blog that I am hosting using NearlyFreeSpeech.net. Recently, Russians found it and have been comment spamming me. I don't want to have to trash 30+ Cyrillic comments/day, and I don't want to pay for that bandwidth either. I did a little research, and all the commentors are originating from RIPE delegated IP ranges. Because my blog can only interest people living in the American Southeast, I figured the quick and dirty solution would be to use .htaccess to deny connections coming from 62.0.0.0/8 and 80.0.0.0/8 - 91.0.0.0/8. I wrote a .htaccess file that did just this, but the Russians were still getting through! According to NearlyFreeSpeech.net's FAQ, they can't support IP blocking through .htaccess (dirt cheap hosting comes with a price). I can block comments by IP through Wordpress (I think), but I can't figure out a way to block IP ranges or wildcards. Does anybody know of any other way?

  Read the article

• Why are my Windows 7 updates continuously failing?

  - by Chris C.

  I'm an advanced level user here with an odd issue. I have two Windows Updates that are failing to install, every single time. I'm getting a mysterious "Code 1" error on both updates, an error for which I'm having difficulty finding a solution. The updates in question are: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Because these updates are failing, the Shut Down button in my start menu always has the shield icon next to it, indicating that "new" updates will be installed on shut down. But, of course, they'll fail and when the PC is restarted, the shield icon is still there. When checking the update history and viewing the details of the failed updates, I get the following: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) Installation date: ?6/?29/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. More information: http://go.microsoft.com/fwlink/?LinkId=216803 System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Installation date: ?6/?28/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important This tool is being offered because an inconsistency was found in the Windows servicing store which may prevent the successful installation of future updates, service packs, and software. This tool checks your computer for such inconsistencies and tries to resolve issues if found. More information: http://support.microsoft.com/kb/947821 About My System I'm running Windows 7 Home Premium x64 Edition. This is a custom PC build and the OS was installed fresh, not an upgrade from a previous version. I've been running this system for about 4 months. Windows Updates aside, the system is usually quite stable. Thanks in advance for your help!

  Read the article

• mysql master-master setup as a way to simply master-slave promotion

  - by Chris Go

  I'm trying to see if the following plan is viable. Goal here is to be able to do HA (uptime) and not necessarily for load -- writes are fine on one MySQL 5.5 server (with innodb) but not really possible when the database is down. Currently, I have a master-slave replication setup which works fine except it doesn't have automatic promotion (obviously). what I am planning on doing is setup master-master replication to possibly do this "automatic promotion" using Amazon Route 53 DNS Failover (Health checks). What I am trying to avoid is to NOT have to do the auto-increment trick because the "business folks" got used to the auto-incrementing PK as consecutive numbers (yeah, I know this is bad but data is from 2004). So, setup the master-master replication WITHOUT the auto-increment collision prevention bit. The primary master is db1.domain.com and secondary master is db2.domain.com In Amazon Route 53, setup DNS Failover record for db.domain.com - primary failover is db1.domain.com - with a TCP healthcheck on IP address port 3306 - secondary failover is db2.domain.com - with a TCP healthcheck on IP address port 3306 Most of the time (99%), unless tcp://db1.domain.com:3306 is dead, db1.domain.com will be served up on DNS hits to db.domain.com. In fact, hopefully this is 100%. The possible downsides of this is the loss of a primary key (collision) and I think I am OK with losing one order. We are a low data volume B2B business and can just call our client up if this occurs (like an order disappearing). Does this sound like a good plan? Then I will also run another slave replication on db1.domain.com as "master" to a slave-db1.domain.com -- not sure why, maybe for heavy SELECTs?

  Read the article

• How to install a linux distro (backtrack) to/from a usb stick on a netbook

  - by Chris

  I have a netbook with no CD drive, so I need ot install from USB stick. I need to install backtrack on my netbook for a wireless security project for school. How is this done? I only have a 4GB stick. I'm also able to mount the .iso from on the netbook, but I'm not sure how to get it to install to a partition off of a virtual drive.

  Read the article

• Wireless Router will not allow connection

  - by Chris

  I am working with a RangeMax(TM) Wireless Router WPN824 v2, and it will not allow a wireless connection nor a wired connection. I am at an actual lost, with no way into the router I cannot test settings. I have unplugged it, left it off for a 32 hours, and reset it with no luck. Any ideas? Could the router just be done-zo?

  Read the article

• HTTP Headers - need to check OPTIONS

  - by chris

  I've received the results of a pen test and there is some unwanted exposure in the HTTP OPTIONS where the fact that Frontpage Server Extensions was available (now removed) was reported. I need to run a check on the OPTIONS to see whether it has been removed. The test output from the report is below, I need to recreate it to establish that it has gone but don't know how to check the OPTIONS, I can only find tools that seem to check the "HEAD / HTTP/1.1". Does anyone know how to test this - I'm running a Windows environment? Many thanks OPTIONS / HTTP/1.1 Host: www.website.com HTTP/1.1 200 OK Allow: OPTIONS, TRACE, GET, HEAD Content-Length: 0 Server: Microsoft-IIS/6.0 Public: OPTIONS, TRACE, GET, HEAD, POST MS-Author-Via: MS-FP/4.0 X-Powered-By: ASP.NET MicrosoftOfficeWebServer: 5.0_Pub Date: Fri, 01 Feb 2010 16:09:15 GMT

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >