Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 43/1029 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • It takes a long time until Windows XP recognize I connected USB drive

    - by Pavol G
    I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

    Read the article

  • Refresh devices - reconnect CF card drive by script (unplug-plug equivalent)

    - by Chris
    Hello I plug a completely clean CF-card into my USB card-writer. Then I dd a mbr block of 512 bytes size to the device, which contains the partition table and the definition of one partition. Problem: While "fdisk -l /dev/sdx" correctly displays the partition, it happens that there is no device like "/dev/sdx1" after these operations (as it was not present before). Unplugging and plugging the card-writer solves the problem and makes the device(s) appear. Since I use this procedure in a script, manually unplugging and re-plugging is no option whatsoever. Is there a way to "refresh" the devices or to "unplug and re-plug" the drive by script such that /dev/sdx1 appears? Thanks for any help, Chris

    Read the article

  • Set Display Refresh Rate in OSX w/o External Utilities

    - by codedonut
    I have an iMac and an LG Flatron connected as a secondary monitor. The recommended resolution for the flatron is 1680x1050 @ 65.290 Hz (horiz), 59.954 Hz (vert). For some reason, OSX is choosing a slightly different set of scan rates and this is currently my best guess of why the monitor goes into power saving mode when connected to the iMac (but works fine on a PC). Now, I resolved this by installing switchResX and fudging the scan rates according to the specs in the manual. But how does one change these rates w/o 3rd party tools? Which config files need editing? Thanks

    Read the article

  • Repair snapped USB flash drive

    - by Richard Slater
    I have a USB Flash Drive that has had the USB connector snapped away from the circuit board. In the past I have had great sucess with soldering the connector back to the circuit board with 4 solid core wires. Unfortunatly this particular device shows up as "Unknown Device" in device manager and displays 0ma power usage. Giving a closer look at the circuit board it appears that the Data + connector has come away from the PCB. Which would explain why it is not recognised. Is there any practicable way of lifting the data from the device? larger version

    Read the article

  • If Ubuntu freezes when running off a USB drive, will it freeze after full installation?

    - by fearoffours
    I'm planning to install Ubuntu on an aging Compaq Presario V5000. I've established that the Unity desktop is not suited to this laptop, and am now using the standard (Gnome?) desktop. I'm grappling with ndiswrapper and my wireless chipset. But I'm still running it off a USB drive before I take the plunge and install properly to my internal HD. Part of my reticence in completing the installation is I'm experience freezes after about 10-20 minutes usage. Is this likely to be in any way related to running it off the USB drive?

    Read the article

  • How can I resize an external USB NTFS partition?

    - by chris
    I have a new USB drive which came with a single NTFS partition. How can I shrink that so that I can create an ext4 partition? gparted does not seem to have the "Resize" option highlighted. Update: After following the directions below, after unmounting I am still not able to resize the partition. There is a warning though: "Unable to find mount point. Unable to read the contents of this file system! Because of this, some operations may be unavailable. The following list of software packages is required for ntfs file system support: ntfsprogs". However, with the partition mounted, I can read & write to the file system on the drive just fine, and ntfsprogs is installed and current. What's next?

    Read the article

  • How do I safely use a virus infected USB drive in Ubuntu?

    - by suhridk
    I have an USB drive which I know is virus infected (an anti-virus on my friend's machine detected it). Unfortunately neither of us know the virus name and I don't want to take the risk of plugging it to my Windows box again. Of course, in all probability the virus affects only Windows. (But I'm not sure) I want to know if I can safely plug the USB into my Ubuntu Lucid laptop and copy the stuff I need from the drive. If there are some precautions I need to follow what would they be?

    Read the article

  • Transfer Raid Drives to External Enclosure

    - by dubbeat
    I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

    Read the article

  • How to slave a 3.5" 500gb sata external hdd(Western Digital) to my dell Inspiron laptop

    - by AJ HDD
    i have a 3.5" western digital my book 500gb external hdd....i gave it to a friend of mine and he broke the usb port in it...i went to a nearby comp repair shop and had him solder the thing...it didnt detect when i plugged it in my dell inspiron laptop........i recently saw about the 3.5" sata to usb enclosure, so i went to check it....strangely when its placed in the enclosure, its not detecting in windows...also when it was put as secondary(im guessing slave) to the shop fellow's desktop it shows up in the bios and starting, but then again doesnt show in windows 7, and the guy told me i need to data recovery to get teh data back p.s.the wd hdd doesnt have os, just data, soo my question is: can i slave the drive to my dell laptop and try to recover the data....if so how? please i would really appreciate it...thanks in advance

    Read the article

  • Input/output (read) errors in Bacula while setting up a Tape Drive + Autochanger

    - by Kyle Brandt
    When running the label barcode command in bacula I am getting Input/output errors. I am just getting started in trying to set this up: Connecting to Storage daemon TapeDevice at ny-back01.ny.stackoverflow.com:9103 ... Sending label command for Volume "ACJ332" Slot 1 ... 3307 Issuing autochanger "unload slot 8, drive 0" command. 3304 Issuing autochanger "load slot 1, drive 0" command. 3305 Autochanger "load slot 1, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ332" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ332", Slot 1 successfully created. Sending label command for Volume "ACJ331" Slot 2 ... 3307 Issuing autochanger "unload slot 1, drive 0" command. 3304 Issuing autochanger "load slot 2, drive 0" command. 3305 Autochanger "load slot 2, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ331" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ331", Slot 2 successfully created. Sending label command for Volume "ACJ328" Slot 3 ... 3307 Issuing autochanger "unload slot 2, drive 0" command. 3304 Issuing autochanger "load slot 3, drive 0" command. 3305 Autochanger "load slot 3, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ328" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ328", Slot 3 successfully created. Sending label command for Volume "ACJ329" Slot 4 ... 3307 Issuing autochanger "unload slot 3, drive 0" command. 3304 Issuing autochanger "load slot 4, drive 0" command. 3305 Autochanger "load slot 4, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ329" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ329", Slot 4 successfully created. Sending label command for Volume "ACJ335" Slot 5 ... 3307 Issuing autochanger "unload slot 4, drive 0" command. 3304 Issuing autochanger "load slot 5, drive 0" command. 3305 Autochanger "load slot 5, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ335" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ335", Slot 5 successfully created. Sending label command for Volume "ACJ334" Slot 6 ... 3307 Issuing autochanger "unload slot 5, drive 0" command. 3304 Issuing autochanger "load slot 6, drive 0" command. 3305 Autochanger "load slot 6, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ334" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ334", Slot 6 successfully created. Sending label command for Volume "ACJ333" Slot 7 ... 3307 Issuing autochanger "unload slot 6, drive 0" command. 3304 Issuing autochanger "load slot 7, drive 0" command. 3305 Autochanger "load slot 7, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ333" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ333", Slot 7 successfully created. Sending label command for Volume "ACJ330" Slot 8 ... 3307 Issuing autochanger "unload slot 7, drive 0" command. Bacula-dir: # Definition of file storage device Storage { Name = TapeDevice # Do not use "localhost" here Address = ny-back01.... # N.B. Use a fully qualified name here SDPort = 9103 Password = "..." Device = ULTRIUM-HH4 Media Type = LTO-4 Media Type = File Autochanger = Yes } Bacula-sd: Autochanger { Name = StorageLoader1U Device = ULTRIUM-HH4 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg5 } Device { Name = ULTRIUM-HH4 Media Type = LTO-4 Archive Device = /dev/st0 AutomaticMount = yes; AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes; RandomAccess = no; } Anyone knows what this means / why I am getting this?

    Read the article

  • Exchange Server 2003 Drive Error

    - by Saif Khan
    My exchange box went offline this AM. The logs show The device, \Device\Harddisk1, has a bad block. I tried running chkdsk D: /x /r but that didn't help either. I went to the Exchange Manager and tried to move the .stm file from D: to C: but got Exchange System Manager The database files in this store are corrupted. ID no: c104173b Exchange System Manager What else is there to try just to get this online for a few hours until I can get onsite to change the drive. This is a Windows Server 2003 server.

    Read the article

  • Why dd is not a reliable command to write bootable .iso files to USB thumb drive?

    - by Samik
    As the answers here indicate Ubuntu .iso s are not expected to boot if copied with dd to a USB thumb drive. Now my question is why is so that some Linux distributions have the option to directly write their bootable .iso file to a thumb drive with dd but some (read Ubuntu) have not(for Ubuntu I think it has to be converted to .img first). Is it for some architectural difference in .isos? Or is it due to any limitation of dd itself?I don't know if it is off-topic here. I can move it to a more proper place if the community thinks so or suggests one. Some explanation would be appreciable.

    Read the article

  • Weird Ubuntu Desktop Boot Partition On External Hard Drive

    - by Magnitus
    I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

    Read the article

  • how to use gparted to partion 2 drives as 1

    - by user281745
    I have my lenovo t43 and I have a SATA extra HD drive instead of the CD drive and I have in it a 250 GB hard drive and in my HD caddy I have a 40 GB hard drive I would like to use gparted to partition these 2 drives as 1 i would like to have the 250 GB as a extended part of the 40 GB cause i already have Ubuntu Installed on it, they are right now not side by side im not sure how to do this so please list by step by step thank you http://imgur.com/dE0B7dy,qRRPgoB http://imgur.com/dE0B7dy,qRRPgoB#1

    Read the article

  • Data transfer is extrem slow after partitioning extern usb drive

    - by user125912
    I bought an extern usb 3.0 drive with 500 gb capacity. OS is Windows 7. I use it with an usb 2.0 slot, no prob. Initially I used it without making several partitions and it was fast as hell. Then I had the great idea to make partitions, one for programs, one for data and one for backup. I chose the free EASEUS Partition Master 9.1.1. and ended up with these partitions: F:Apps, primary, NTFS, 100gb H:Data, logic, NTFS, 250gb B:Backup, logic, NTFS, 150gb THE PROBLEM: When I copy files from C: to F: I get a transfer rate of about 100 KB/S ! When I copy files from C: to H: I get a transfer rate of about 4 MB/S ! thats all muuuch to slow, slower then before. What can I do to speed the shit up? Thanks in advance!

    Read the article

  • Ubuntu 11.10 is on external HDD, how to boot (using grub4dos), and which initrd and vmlinuz to use?

    - by user198003
    I installed Ubuntu 11.10 on external HDD. How can I boot it? I used grub4dos before, and it worked with Fedora distributions. Problem I have now is that I don't know which initrd and vmlinuz files to use. Tried with one I have in /boot directory, but booting did not worked... Can you give me some ideas what to try, do i have to use different initrd and vmlinuz, or I can solve this with other solutions. Also, just to mention that boot goes to BusyBox v1.18.4 command prompt. Thank you in advance!

    Read the article

  • Analyse frequencies of date ranges in Google Drive

    - by wnstnsmth
    I have a Google Drive spreadsheet where I would like to compute occurrences of date ranges. As you can see in my sheet, there is a column date_utc+1 which contains almost random date data. https://docs.google.com/spreadsheet/ccc?key=0AhqMXeYxWMD_dGRkVGRqbkR3c05mWUdhYkJWcFo2Mmc What I would like to do is 1) put the date values into bins of 6 hours each, i.e. 12/5/2012 23:57:04 until 12/6/2012 0:03:17 would be in the first bin, 12/6/2012 11:20:53 until 12/6/2012 17:17:07 in the second bin, and so forth. Then, I would like to count the occurrence of those bins, such as bin_from bin_to freq ----------------------------------------------- 12/5/2012 23:57:04 12/6/2012 0:03:17 2 12/6/2012 11:20:53 12/6/2012 17:17:07 19 ... ... ... Hope it is clear what I mean. Partial hints are very welcome as well since I am pretty new to spreadsheeting.

    Read the article

  • Installed Ubuntu on usb drive, now it's read-only and can't be formatted

    - by weiszam
    I installed Ubuntu (ubuntu-13.04-desktop-amd64) on a 8 gb pendrive. Because it worked pretty slow, I wanted to change it back to a normal pendrive. But this is what happened. Windows7 can't open the usb drive, can't view files or anything, can't access attributes. When I select to format, it says it can't format it because it is write-protected. Tried the same running from an Ubuntu, and trying from a booted GParted thing. When I view the partitions, they can't be deleted either. What should I do to get it formatted?

    Read the article

  • Get HDD (and NOT Volume) Serial Number on Vista Ultimate 64 bit

    - by TheAgent
    Hi all. I was once looking for getting the HDD serial number without using WMI, and I found it. The code I found and posted on StackOverFlow.com works very well on 32 bit Windows, both XP and Vista. The trouble only begins when I try to get the serail number on 64 bit OSs (Vista Ultimate 64, specifically). The code returns String.Empty, or a Space all the time. Anyone got an idea how to fix this? EDIT: I used the tools Dave Cluderay suggested, with interesting results: Here is the output from DiskId32, on Windows XP SP2 32-bit: To get all details use "diskid32 /d" Trying to read the drive IDs using physical access with admin rights Drive 0 - Primary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Trying to read the drive IDs using the SCSI back door Drive 4 - Tertiary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Trying to read the drive IDs using physical access with zero rights **** STORAGE_DEVICE_DESCRIPTOR for drive 0 **** Vendor Id = [] Product Id = [MAXTOR STM3160215AS] Product Revision = [3.AAD] Serial Number = [] **** DISK_GEOMETRY_EX for drive 0 **** Disk is fixed DiskSize = 160041885696 Trying to read the drive IDs using Smart Drive 0 - Primary Controller - - Master drive Drive Model Number________________: [MAXTOR STM3160215AS] Drive Serial Number_______________: [ 6RA26XK3] Drive Controller Revision Number__: [3.AAD] Controller Buffer Size on Drive___: 2097152 bytes Drive Type________________________: Fixed Drive Size________________________: 160041885696 bytes Hard Drive Serial Number__________: 6RA26XK3 Hard Drive Model Number___________: MAXTOR STM3160215AS And DiskId32 run on Windows Vista Ultimate 64-bit: To get all details use "diskid32 /d" Trying to read the drive IDs using physical access with admin rights Trying to read the drive IDs using the SCSI back door Trying to read the drive IDs using physical access with zero rights **** STORAGE_DEVICE_DESCRIPTOR for drive 0 **** Vendor Id = [MAXTOR S] Product Id = [TM3160215AS] Product Revision = [3.AA] Serial Number = [] **** DISK_GEOMETRY_EX for drive 0 **** Disk is fixed DiskSize = 160041885696 Trying to read the drive IDs using Smart Hard Drive Serial Number__________: Hard Drive Model Number___________: Notice how much lesser the information is on Vista, and how the Serial Number is not returned. Also the other tool, EnumDisk, refers to my hard disks on Vista as "SCSI" as opposed to "ATA" on Windows XP. Any ideas? EDIT 2: I'm posting the results from EnumDisks: On Windows XP SP2 32-bit: Properties for Device 1 Device ID: IDE\DiskMAXTOR_STM3160215AS_____________________3.AAD___ Adapter Properties ------------------ Bus Type : ATA Max. Tr. Length: 0x20000 Max. Phy. Pages: 0xffffffff Alignment Mask : 0x1 Device Properties ----------------- Device Type : Direct Access Device (0x0) Removable Media : No Product ID : MAXTOR STM3160215AS Product Revision: 3.AAD Inquiry Data from Pass Through ------------------------------ Device Type: Direct Access Device (0x0) Vendor ID : MAXTOR S Product ID : TM3160215AS Product Rev: 3.AA Vendor Str : *** End of Device List

    Read the article

  • can't write to physical drive in win 7??

    - by matt
    I wrote a disk utility that allowed you to erase whole physical drives. it uses the windows file api, calling : destFile = CreateFile("\\.\PhysicalDrive1", GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING,createflags, NULL); and then just calling WriteFile, and making sure you write in multiples of sectors, i.e. 512 bytes. this worked fine in the past, on XP, and even on the Win7 RC, all you have to do is make sure you are running it as an administrator. but now I have retail Win7 professional, it doesn't work anymore! the drives still open fine for writing, but calling WriteFile on the successfully opened Drive now fails! does anyone know why this might be? could it have something to do with opening it with shared flags? this is always what I have done before, and its worked. could it be that something is now sharing the drive? blocking the writes? is there some way to properly "unmount" A drive, or atleast the partitions on it so that I would have exclusive access to it? some other tools that used to work don't any more either, but some do, like the WD Diagnostic's erase functionality. and after it has erased the drive, my tool then works on it too! leading me to belive there is some "unmount" process I need to be doing to the drive first, to free up permission to write to it. Any ideas?

    Read the article

  • Disk Error on Boot (Possible boot sector issue)

    - by Choco
    I own a 4-5 year old Dell Dimension E510 with Windows XP: Media Center Edition. I have 2 drives installed: C Drive: Windows XP: Media Center Edition G Drive: 2 partitions: Windows 7 (beta) Windows XP (professional) That is also the order they are connected. The C Drive is my primary drive. When I attempt to boot the computer, the bios loading screen appears normally; the progress bar moves and it's fine. The very next page, however, supposed to be a boot choice. When I installed Windows 7 onto the G Drive in context of the C drive it added a boot selector to the C drive's boot sequence. It gives me the option of booting Windows 7 or Windows XP: Media Center Edition. However, my problem is now this: After the bios screen I previously mentioned, instead of a boot selector, I receive the following error: A disk read error occurred. Press CTRL+ALT+DEL to restart. The drive is spinning up normally. I hear no odd noises/clicks/scraping coming from it, even after disabling the other drive to listen to it carefully. According to me, it's a boot sector issue. I have never experienced this before, but maybe during a recent shutdown, Windows XP: MCE errored out and ruined the boot sector. Dilemma! I don't have the Windows XP: MCE disc, because it was installed by the factory. I have accessed the hidden partition on the drive before (you hit a key combination on the bios screen and it comes up with an interface to fix your drive). However, I don't want to reformat the drive (which is what the interface gives me the option to do). I want to possibly fix the boot sector. How can I achieve that?

    Read the article

  • How to prevent autoplay and run my own app when inserting an USB-Flash drive

    - by Thomas
    when inserting an USB-Flash drive, Windows normally opens the Autoplay dialog that offers to browse the drive or if there are multimedia files it offers to choose an app to open them. We developed a media player that is connected to the USB-Drive and registers itself as Mass Storage Device. What I need is, that when inserting the Player that this Dialog is not shown, but instead my own application is launched. Ideally the application would be on the Flash Drive itself, but as I understood is that Autorun is disabled for USB-Drives. It would be enough if a preinstalled application is launched. I already tried to catch the WM_DRIVE_CHANGE message, but this only works if my application is the top most window, otherwise the Autoplay Dialog is displayed. Best Tom

    Read the article

  • Toshiba laptop cd drive read causes OS to totally freeze

    - by Fujishiro
    Okay I'll try to write an understandable summary. Forgive me if I'll fail with that attempt though. So. There is a Toshiba Satellite notebook. Got Windows 7 x86 Professional (OEM) installed on it, everything is fine (okay.. somewhat). The problem. If you put an audio or any kind of disc into the drive, something starts to eat the PC. Back then when the owner told me about this, he put an audio disc into the lappy. Winamp caused the IO load, 100%. Tried taskkill, taskkill /T, tried powershell, EVERYTHING. You just can NOT kill winamp or anything which becomes the blocker at that time. Even if you kill almost everything, laptop won't do a clear shutdown. Also I tried to use the force switch at 'shutdown' from cmd, but no use. (So: At these times you can use the laptop, but the blocker/explorer/disc becomes gray as a non-responding app. You can try to kill them, but that won't work, nor you can shutdown the machine). (Also tried using PID, but no use. For the highest IO I used the "select columns" from Task Manager and enabled the IO columns.) My first hunch was the problematic disc, autoplay and it tries to read tries to read (still shouldn't kill the PC). Disabled autoplay, removed winamp. Tried other software, etc. Everything was ok. Few days later the owner tried to put a disc into the machine and it started to reproduce the same symptoms but with a totally different disc. Uhm what to know. Virus is not an option, protected by BitDefender (valid license) and Spybot. Thanks if you have ANY idea about this strange problem. ps.: For now, the owner uses Daemon tools + Blindwrite as an alternative for those apps which wouldnt start without the disc.

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >