Search Results

Search found 17267 results on 691 pages for 'home router'.

Page 43/691 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • Capabilities of business and SOHO routers

    - by Q8Y
    I'm currently studying for the CCNA certifications (especially for Cisco routers and configuration). I know that business routers provide more features than SOHO routers, the processing speed and RAM can be enough. Assume I need to connect a number of users through a network (accessing internet, share files, printers, ...). I have a high speed connection to the internet and I already applied QoS. How can I find out how many users such a single (SOHO) router could handle? In my case I'd attach to it multiple switches until I have the number of ports needed. Would everything work well and smoothly with 50 users? What about 300? At which point would I need a business router instead? If I implemented VLAN here, would it make any difference in the performance? When do I really need to use more than one router? (Both SOHO and business) I'm thinking that I may need them only if I want to increase the performance (instead of replacing the existing one) and if I have multiple locations, so in this situation I need to have multiple routers, right? Put differently: Is there is a need to have another router if my business all in one place?

    Read the article

  • Windows 7 'Unidentified Network'

    - by Throdne
    So my internet was working last night before I went to bed and woke up to a computer that is showing unidentified network. I have tried multiple ways of fixing it. > route delete 0.0.0.0 > uninstalling drivers - restart - reinstall from downloaded drivers > ipconfig /release - /renew > static IP > speed & duplex from auto negotiation to 1.0gbps full duplex > and also changed my network address to no value to 1234567890ab (not in that order) nothing seems to work. I have Comcast internet and when I connect the computer to the modem it works perfectly. but when I connect it to my router again, Unidentified network. I know my router isn't faulty, because my macbook pro, server, NAS, iPhones, and iPads are still working. I have also tried moving the port on the router, still same problem. my router is a: Cisco Small Business RVS4000 motherboard: GIGABYTE GA-990FXA-UD3

    Read the article

  • OSX - User home directories shared via NFS

    - by Hugh
    Hi, I've run into some problems with how I've got user home directories set up on our system here. Our server is an XServe, using Open Directory to manage the user accounts. The majority of our workstations are OSX, but there are a few running Linux (Centos 5.3), and, as time goes on, we expect the proportion of Linux workstations to increase (at some point, we expect to move the server side over to Linux too, but for now we're running with what we've already got) To ensure that the Linux and OSX workstations both see user's home directories in the same place, I shared the home directories using NFS. On the server end, the home directories are stored in: /Volumes/data/company_users This is mounted on the workstations to: /mount/company_users This work fine on the Linux workstations, but there is some weirdness under OSX. For the user who is logged in through the GUI, it all works just fine. However, if a user tries to SSH into a machine that they are not the primary user on, they often have no access to their own home directory. It looks as though OSX is trying to do something else to the user home directories mount point when you log in through the GUI.... For example, on this machine (nv001), I (hugh) am logged into the GUI. Last login: Mon Mar 8 18:17:52 on ttys011 [nv001:~] hugh% ls -al /mount/company_users total 40 drwxrwxrwx 26 hugh wheel 840 27 Jan 19:09 . drwxr-xr-x 6 admin admin 204 19 Dec 18:36 .. drwx------+ 128 hugh staff 4308 27 Feb 23:36 hugh drwx------+ 26 matt staff 840 4 Dec 14:14 matt [nv001:~] hugh% So Matt's home directory is accessible to him. However, if I try to switch to him: [nv001:~] hugh% su - matt Password: su: no directory [nv001:~] hugh% Or: [nv001:~] hugh% su matt Password: tcsh: Permission denied tcsh: Trying to start from "/mount/company_users/matt" tcsh: Trying to start from "/" [nv001:/] matt% Does anyone have any idea why it might be doing this? It's causing me all sorts of problems at the moment... The only machine that I can successfully switch users at the moment is the server that the user directories are stored on, where /mount/company_users is actually just a symlink to /Volumes/data/company_users Thanks

    Read the article

  • Configuring Cisco 877W router from scratch for DHCP, WiFi, ADSL2+, NAT

    - by David M Williams
    Hi all, I apologise if this is a BIG question but I am quite lost with the Cisco IOS. I know what I want to achieve just not how to do it :( I have a Cisco 877W router with 4 FastEthernet interfaces, 1 ATM interface and 1 802.11 Radio. I want to set it up for a small network and am trying to construct a configuration below. I was using Google to try and flesh it out but I think I need help and guidance from actual experts! If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software Here's what I have so far, which hopefully outlines clearly enough what I am wanting to do. The bits in angle brackets are placeholders (eg the secret password). ! ! Set router hostname ! hostname Shazam ! ! Set usernames and passwords ! username david privilege 15 secret 0 <PASSWORD> enable secret <SECRETPASSWORD> ! ! Configure SSH and telnet access ! line vty 0 4 privilege level 15 login local transport input telnet ssh ! ! Local logging ! logging buffered 51200 warning ! ! Set date and time for NSW, Australia (GMT +10h) ! ! ! Set router IP address to 192.168.1.1 on FastEthernet0 port ! interface FastEthernet0 ip address 192.168.1.1 255.255.255.0 no shut ip nat inside ! ! Forward any unknown DNS requests to Google ! ip dns server ip name-server 8.8.8.8 ip name-server 8.8.4.4 ! ! Set up DHCP ! DHCP pool covers 192.168.1.100 - .199 ! Set gateway and DNS server to be the router, ie 192.168.1.1 ! service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool <DHCPPOOLNAME> network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ! ! DHCP reservations ! ! Assign IP address 192.168.1.105 to MAC address 00-21-5D-2F-58-04 ! ! Configure ADSL2 connection details ! interface atm dsl operating-mode adsl2+ ! ! Set up NAT rules ! ! Forward port 35394 to 192.168.1.105 ! ! Set up WiFi ! ! SSID visible, WPA2 security, Pre-shared key I'm hoping most of this is boiler-plate stuff to you guys. I'm keen to not just get a working script but to actually understand it also. Unfortunately, I'm finding the Cisco reference material online very complex. Thank you!

    Read the article

  • Mac OS X - User home directories shared via NFS

    - by Hugh
    I've run into some problems with how I've got user home directories set up on our system here. Our server is an XServe, using Open Directory to manage the user accounts. The majority of our workstations are OS X, but there are a few running Linux (Centos 5.3), and, as time goes on, we expect the proportion of Linux workstations to increase (at some point, we expect to move the server side over to Linux too, but for now we're running with what we've already got) To ensure that the Linux and OS X workstations both see user's home directories in the same place, I shared the home directories using NFS. On the server end, the home directories are stored in: /Volumes/data/company_users This is mounted on the workstations to: /mount/company_users This work fine on the Linux workstations, but there is some weirdness under OS X. For the user who is logged in through the GUI, it all works just fine. However, if a user tries to SSH into a machine that they are not the primary user on, they often have no access to their own home directory. It looks as though OS X is trying to do something else to the user home directories mount point when you log in through the GUI.... For example, on this machine (nv001), I (hugh) am logged into the GUI. Last login: Mon Mar 8 18:17:52 on ttys011 [nv001:~] hugh% ls -al /mount/company_users total 40 drwxrwxrwx 26 hugh wheel 840 27 Jan 19:09 . drwxr-xr-x 6 admin admin 204 19 Dec 18:36 .. drwx------+ 128 hugh staff 4308 27 Feb 23:36 hugh drwx------+ 26 matt staff 840 4 Dec 14:14 matt [nv001:~] hugh% So Matt's home directory is accessible to him. However, if I try to switch to him: [nv001:~] hugh% su - matt Password: su: no directory [nv001:~] hugh% Or: [nv001:~] hugh% su matt Password: tcsh: Permission denied tcsh: Trying to start from "/mount/company_users/matt" tcsh: Trying to start from "/" [nv001:/] matt% Does anyone have any idea why it might be doing this? It's causing me all sorts of problems at the moment... The only machine that I can successfully switch users at the moment is the server that the user directories are stored on, where /mount/company_users is actually just a symlink to /Volumes/data/company_users

    Read the article

  • MTU, DSL router and stalling TCP

    - by user38843
    I am discovering stalling TCP connection problem. The problem arises when I try to scp stuff from remote system from my home network. My home network is connected to internet via PPPoE (ADSL+) and everything works perfectly once working from my home network. The ADSL router has MTU set to 1492 but with that setting the scp from remote system does not work - stalling! When I change the MTU on my router to 1500 the that scp works perfectly but internet accesses from my home network is very slow to most of the www sites - even local ones. Just wondering where the problem exists - my ISP blocking ICMP, etc? Thanks!

    Read the article

  • MAC and PC problems on home network

    - by tombull89
    Hello! At home we have a wireless router that my family want to use. We have our main computer physically connected to the router, and my laptop is connected wirelessly. When the network is like this then it is faultless. However, when my brother introduces is Apple MAC into the equation, both my laptop and the family machine gets all sorts of problems, primarily long load times and timeouts. The MAC, however, works fine. I think I've read something here or SF about a MAC continusly pinging a router which times it out, but I've not found any solution so far. Router: Belkin F5D7634uk4A-H Home Computer: XP SP3 My Laptop: Windows 7, Ultimate Mac: 13" Macbook Pro, Snow Lepoard

    Read the article

  • Pitfalls to using Gluster as a home/profile directory server?

    - by Bart Silverstrim
    I was asking recently about options for divvying up access to file servers, as we have a NAS solution that gets fairly bogged down when our users (with giant profiles, especially) all log in nearly simultaneously. I ran across Gluster and it looks like it can cluster different physical storage media into a single virtual volume and share it out like a virtual NAS from the client perspective and it support CIFS. My question is whether something like this would be feasible to use for home and profile directories in an active directory environment. I was worried about ACL's, primarily, as I didn't think CIFS was fine-grained enough to support NTFS permissions and it didn't look like Gluster exports those permission levels, just the base permissions for basic file sharing. I got the impression that using Gluster would allow for data to be redundant across multiple servers and would speed up access to the files under heavy load, while allowing us to dynamically boost storage capacity by just adding another server and telling Gluster's master node to add that server. Maybe I'm wrong with my understanding of it though. Anyone else use it or care to share how feasible this is?

    Read the article

  • Apache Not Accepting a Path in My Home Folder

    - by Promather
    I have trying to set up an Apache site to use a folder in my home folder without any success. I exactly followed the steps in this page: https://help.ubuntu.com/community/ApacheMySQLPHP yet I did not succeed; I keep getting error 403, which says that the server doesn't have permission to access the requested page. I searched forums and many suggested changing the permission of the folder. I went straight away and set the permission to 777, but that didn't solve the problem. I made another search and somebody gave me a clue, which is that it could be because my home folder is encrypted. I believe this could be the problem, but: What is the relation between encryption and Apache? I suppose Apache server is requesting the file from the system, rather than trying to access the file bytes! Is there anyway to solve this problem? I don't want to move the folder to /var/www because I am using this Apache for testing, so I want whatever change I make to be immediately reflected, rather than having to copy files which is error prone.

    Read the article

  • how to Host website from my home ADSL?

    - by Amr ElGarhy
    I knew that i can use DynDNS to setup a hosting which will access my home adsl for hosting a website. I entered there but couldn't figure out how to setup this in steps, i registered a host name but couldn't link to my router, i feel that there somethings missed. Also i checked this article but it didn't help me because i couldn't find options he is talking about in my router. My router is D-Link wireless. And i have a dynamic IP address

    Read the article

  • how to Host website from my home ADSL?

    - by Amr ElGarhy
    I knew that i can use DynDNS to setup a hosting which will access my home adsl for hosting a website. I entered there but couldn't figure out how to setup this in steps, i registered a host name but couldn't link to my router, i feel that there somethings missed. Also i checked this article but it didn't help me because i couldn't find options he is talking about in my router. My router is D-Link wireless. And i have a dynamic IP address

    Read the article

  • [MINI HOW-TO] Repair Missing External Hard Drive Database Error in WHS

    - by Mysticgeek
    If you’re using external hard drives with your Windows Home Server, they might get unplugged and create an error. Here we look at running the Repair Wizard to quickly fix the issue. If an external drive that is included in your drive pool becomes unplugged or loses power, you might see the following error under Home Network Health when opening the WHS Console. To fix the issue verify the drive has power and is plugged in correctly and click Repair. The wizard launches and you’ll need to agree that you may lose data during the repair of the backup database. In this example it was a simple problem where an external drive became unplugged from the server…so you can close out of the wizard. If you look under Server Storage you can see the drive is missing…To fix the issue verify the drive has power and is plugged in correctly. WHS will add the drive back into the pool and when finished you’ll see it listed as healthy and good to go. Using external drives that are part of your storage pool may not be the best way to have your home built WHS setup, but if you do, expect occasional errors such as this. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaSpeed up External USB Hard Drives in Windows VistaRebit Backup Software [Review]Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

    Read the article

  • Home server hard drive: 186k start-stop cycles in 325 days?

    - by j-g-faustus
    I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

    Read the article

  • Compact DIY Office-in-a-Cart Packs Away Into a Closet

    - by Jason Fitzpatrick
    Many geeks know the pain of losing a home office when a new baby comes along, but not many of them go to such lengths to miniaturize their offices like this. With a little ingenuity an entire home office now fits inside a heavily modified IKEA work table. Ian, an IKEAHacker reader and Los Angeles area geek, explains the motivation for the build: I had to surrender my home office to make room for my new baby boy ;) I took an Ikea stainless steel kitchen “work table”, some Ikea computer tower desk trays, two steel tabletops, and two grated steel shelves to make an “office” that I could pack away into a closet. Hit up the link below to check out the full photo set, the build includes quite a few clever design choices like mounted monitors, a ventilation system, and more. Home Office In A Box [IKEAHacker] HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

    Read the article

  • WiFi connected to router, but no internet connection

    - by Quetzacotl
    I just got a new notebook, a ThinkPad Edge E530, and installed Ubuntu on it. I'm pretty new to Ubuntu. On the same laptop, running Windows 7, the Wi-Fi connection works fine. Ethernet connection works both on Win7 and on Ubuntu. Only Wi-Fi on Ubuntu does not work; it connects to the Wi-Fi access point but I don't have Internet access. My wireless card is Intel Centrino Wireless-N 2230. What can fix the problem? EDIT: ifconfig -a eth0 Link encap:Ethernet HWaddr b8:88:e3:30:72:34 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:163 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10124 (10.1 KB) TX bytes:10124 (10.1 KB) usb0 Link encap:Ethernet HWaddr 02:15:e0:ec:01:00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 68:5d:43:43:71:e1 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe43:71e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2801 (2.8 KB) TX bytes:26230 (26.2 KB) route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"SATELITE" Mode:Managed Frequency:2.462 GHz Access Point: 00:1F:1F:8D:CC:08 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=60/70 Signal level=-50 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:93 Invalid misc:243 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

    - by user135501
    I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start

    Read the article

  • ssh many users to one home

    - by filippo
    Hiya, I want to allow some trusted users to scp files into my server (to an specific user), but I do not want to give these users a home, neither ssh login. I'm having problems to understand the correct settings of users/groups I have to create to allow this to happen. I will put an example; Having: MyUser@MyServer MyUser belongs to the group MyGroup MyUser's home will be lets say, /home/MyUser SFTPGuy1@OtherBox1 SFTPGuy2@OtherBox2 They give me their id_dsa.pub's and I add it to my authorized_keys I reckon then, I'd do in my server something like useradd -d /home/MyUser -s /bin/false SFTPGuy1 (and the same for the other..) And for the last, useradd -G MyGroup SFTPGuy1 (then again, for the other guy) I'd expect then, the SFTPGuys to be able to sftp -o IdentityFile=id_dsa MyServer and to be taken to MyUser's home... Well, this is not the case... SFTP just keeps asking me for a password. Could someone point out what am I missing? Thanks a mil, f. [EDIT: Messa in StackOverflow asked me if authorized_keys file was readable to the other users (members of MyGroup). Its an interesting point, this was my answer: Well, it wasn't (it was 700), but then I changed the permissions of the .ssh dir and the auth file to 750 though still no effect. Guess it's worth mentioning that my home dir ( /home/MyUser) is also readable for the group; most dirs being 750 and the specific folder where they'd drop files is 770. Nevertheless, about the auth file, I reckon the authentication would be performed by the local user on MyServer, isn't it? if so, I don't understand the need for other users to read it... well.. just wondering. ]

    Read the article

  • Unity on Ubuntu 11.10 - The Dash Home button brings up the panel, but is empty

    - by David M. Coe
    The dash home button brings up a panel that is greyed out, but it is totally empty. It seems to be the very same issue as this: Dash home button brings up blank window which is unanswered. /usr/lib/nux/unity_support_test -p returns OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RV370 OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes I've tried a unity --reset but that doesn't seem to work. Unity seems to reset, but I get the following warning over and over: cs space validation failed unity What should I do next to try and fix this? Edit: Attempted fixes: I've refomatted, did not work. I've done apt-get remove unity then apt-get update then apt-get install unity, did not work. I've switched to Unity 2d and this seems to work. How can I get regualar Unity working or atleast find the error?

    Read the article

  • Can't Ping - Wireless network of home

    - by Naunidh
    Hello, This may seem like other ping problem, but I have tried a lot before posting it here. I have a linksys WRT54G - firmware v8.00.8. I have two laptops one windows vista (192.168.1.99) and Windows Xp (192.168.1.13) connected on WiFi . The Router's IP address is 192.168.1.4, and default gateway is the ADSL modem (192.168.1.1) connected through wire. The problem is that laptops can not ping each other, they can ping the gateway and the linksys router, and both can access internet. Following has been tried (I am pinging from XP machine to Vista): I saw that arp entires for Vista machines were not being populated, so I added static ARP entries. 192.168.1.99 00-19-7e-70-d0-4e static I checked on ethereal that an ICMP packet for MAC address of Vista machine does go out from XP machine towards the Vista machine, but never reaches the Vista machine. So its get eaten by the Router? I added Vista machine to DMZ in my linksys router, so that all the ports are open (In case it was an issue). Firewalls , antivirus etc were turned off, echo was enabled explicitly on vista, file sharing, network discovery were turned on. Network type was set to private. Unchecked everything in Router;s firewall, even though they are only meant for WAN requests. Is there anything else that I should try. Thanks.

    Read the article

  • I deleted all files and folders (including hidden) from /home/username/ now in big trouble

    - by jeffery_the_wind
    I am logged into a remote ubuntu server, and I accidentally erased the entire /home/username/ directory for the current user. The only thing left is a hidden directory called .gvfs. I don't need anything of the Documents/Music/etc. Now it is not letting me cd into the /var/www/ directory, which has permissions 666 and it is owned by the current user. I am afraid to disconnect from my ssh session because I don't know if I will be able to get back on. Have I permanently created a problem? Is there a way I can replace the most important files to the /home/username/ directory? Thanks! ** EDIT ** Thanks everyone for the help. I figured the problem with cd into the /var/www/ was actually my permissions in the /var/www/ directory. It was set to 666, changed it to 755 and everything was good again. It doesn't look like anything systematic was ruined by deleting the contents of the user folder.

    Read the article

  • Why the cucumber features keeps running even though it fails?

    - by Millisami
    Its a rails 2.3.5 app. I'm using the rspec and cucumber for testing. When I run autospec, it runs correctly with the warning (Not running features. To run features in autotest, set AUTOFEATURE=true.) as below: [~/rails_apps/automation (campaign)?] ? autospec (Not running features. To run features in autotest, set AUTOFEATURE=true.) (Not running features. To run features in autotest, set AUTOFEATURE=true.) loading autotest/rails_rspec /home/millisami/.rvm/rubies/ree-1.8.7-2010.01/lib/ruby/1.8/pathname.rb:263: warning: `*' interpreted as argument prefix /home/millisami/.rvm/rubies/ree-1.8.7-2010.01/bin/ruby /home/millisami/.rvm/gems/ree-1.8.7-2010.01/gems/rspec-1.3.0/bin/spec --autospec /home/millisami/rails_apps/automation/spec/controllers/campaigns_controller_spec.rb /home/millisami/rails_apps/automation/spec/models/board_spec.rb /home/millisami/rails_apps/automation/spec/models/user_spec.rb /home/millisami/rails_apps/automation/spec/models/campaign_spec.rb /home/millisami/rails_apps/automation/spec/controllers/outlets_controller_spec.rb /home/millisami/rails_apps/automation/spec/controllers/boards_controller_spec.rb /home/millisami/rails_apps/automation/spec/models/outlet_type_spec.rb /home/millisami/rails_apps/automation/spec/models/vendor_spec.rb /home/millisami/rails_apps/automation/spec/controllers/brands_controller_spec.rb /home/millisami/rails_apps/automation/spec/controllers/vendors_controller_spec.rb /home/millisami/rails_apps/automation/spec/controllers/dashboard_controller_spec.rb /home/millisami/rails_apps/automation/spec/models/brand_spec.rb /home/millisami/rails_apps/automation/spec/helpers/dashboard_helper_spec.rb /home/millisami/rails_apps/automation/spec/models/outlet_spec.rb /home/millisami/rails_apps/automation/spec/models/client_spec.rb /home/millisami/rails_apps/automation/spec/controllers/clients_controller_spec.rb -O spec/spec.opts Now, as it suggests, when I run AUTOFEATURE=true autospec, the specs runs and the cuke features as well. But the problem is that it won't stop. It runs the features and runs them again and again in a loop. It doesn't stop after it fails. Is this due to the warning Warning: $KCODE is NONE as shown below?? [~/rails_apps/automation (campaign)?] ? AUTOFEATURE=true autospec loading autotest/cucumber_rails_rspec Warning: $KCODE is NONE. /home/millisami/.rvm/gems/ree-1.8.7-2010.01/gems/treetop-1.4.5/lib/treetop/ruby_extensions/string.rb:31: warning: method redefined; discarding old indent /home/millisami/.rvm/rubies/ree-1.8.7-2010.01/lib/ruby/1.8/pathname.rb:263: warning: `*' interpreted as argument prefix /home/millisami/.rvm/gems/ree-1.8.7-2010.01/gems/activesupport-2.3.5/lib/active_support/core_ext/object/blank.rb:49: warning: method redefined; discarding old blank? /home/millisami/.rvm/rubies/ree-1.8.7-2010.01/bin/ruby /home/millisami/.rvm/gems/ree-1.8.7-2010.01/gems/rspec-1.3.0/bin/spec --autospec /home/millisami/rails_apps/automation/spec/controllers/campaigns_controller_spec.rb /home/millisami/rails_apps/automation/spec/models/board_spec.rb /home/millisami/rails_apps/automation/spec/models/user_spec.rb /home/millisami/rails_apps/automation/spec/models/campaign_spec.rb /home/millisami/rails_apps/automation/spec/controllers/outlets_controller_spec.rb /home/millisami/rails_apps/automation/spec/controllers/boards_controller_spec.rb /home/millisami/rails_apps/automation/spec/models/outlet_type_spec.rb /home/millisami/rails_apps/automation/spec/models/vendor_spec.rb /home/millisami/rails_apps/automation/spec/controllers/brands_controller_spec.rb /home/millisami/rails_apps/automation/spec/controllers/vendors_controller_spec.rb /home/millisami/rails_apps/automation/spec/controllers/dashboard_controller_spec.rb /home/millisami/rails_apps/automation/spec/models/brand_spec.rb /home/millisami/rails_apps/automation/spec/helpers/dashboard_helper_spec.rb /home/millisami/rails_apps/automation/spec/models/outlet_spec.rb /home/millisami/rails_apps/automation/spec/models/client_spec.rb /home/millisami/rails_apps/automation/spec/controllers/clients_controller_spec.rb -O spec/spec.opts

    Read the article

  • Continual "The Windows Filtering Platform has blocked a connection" errors?

    - by Richard
    Our systems have been compromised by something recently which has lead us to carry out a more detailed look at what is happening on our workstations. I have noticed an issue where the Security log of this Windows 7 workstation is continually logging a security "Audit Failure" where the detail is that "The Windows Filtering Platform has blocked a connection". This is happening thousands of times a day and would appear to be our BT Business Broadband HGV 2700 ADSL router attempting to connect to Port 137 (NET Bios) on my workstation and being blocked. This has unfortunately had the effect of filling up the log files so much that anything which might have been of use which was logged over the weekend to help debug the intrusion has been "overwritten off the end" of the Security log. (I've since increased the log file size limits massively and turned on archiving). Does anyone know if this is standard behaviour of a BT ADSL router or whether this indicates that the router is compromised in some way or malfunctioning, or have any further suggestions as to how to diagnose this problem?

    Read the article

  • Networking Logs for MAC Addresses

    - by NetworkGuy
    I wanted to ask a multi-part question. Does Comcast Cable Internet services record MAC Addresses of the Router behind the cable modem. I know they record it for the modem itself. But is there a way for the Modem/Comcast to relay and keep logs of the MAC ID of the Router itself? Then does a windows operating system Log the MAC ID of the Router when its connected to it? If so where do I locate and purge this? Please let me know all areas where it is Logged within the operating system. Thank you!

    Read the article

  • cannot ssh to computer behind a dd-wrt bridge

    - by Jayaraman
    In my home network , i have dd-wrt router in another room , which bridges wifi from main home router (linksys) to the computers wired behind dd-wrt router. Now I cannot ssh from my laptop ( connected to linksys wifi) to the computers behind dd-wrt wifi bridge. I am able to ping the individual computers behind the dd-wrt bridge. When it comes to ssh or telnet to the computers , it is blocked. What can I do to make dd-wrt bridge to open up all ports in the dd-wrt bridge ?

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >