Search Results

Search found 20475 results on 819 pages for 'multiple repositories'.

Page 43/819 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Dual displays not working with Xinerama in Ubuntu 12.04

  - by user68489

  I just upgraded from Ubuntu 10.10 to 12.04. I had been using a display configuration just like the one described at http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html without any problems under 10.10. I have an nvidia Quadro FX 380 and have upgraded to the latest drivers (295.49). Everything appears to be fine when the system first boots up. However, after logging in, the left screen goes black, and the right screen displays what should be displayed on the left screen. Logging into Ubuntu 2D somewhat improves things. The left screen correctly displays the left portion of the desktop but the right screen contains a duplicate view of the left screen. Turning off Xinerama and enabling TwinView appears to fix the issues but does not allow the right monitor to be rotated. Since the display problems start to occur only after logging on, I thought it might have to do with carryover user configuration from 10.10 but the problems persist even when logging in as a guest. Clicking on System Settings - Displays results in the error message "Could not get screen information - RANDR extension is not present." Any help would be greatly appreciated.

  Read the article

• Connecting two monitors at the corners

  - by fastmultiplication

  I am using two separate X screens on two monitors and I would like them to be connected at the lower right corner. That is, if you move to the lower right corner of screen0 the mouse should appear at the upper left of screen1. I do not want an entire edge of each monitor to be permeable to the mouse. I modified the xorg.conf file like so: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Relative "Screen0" 1200 1000 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection (screen 0's resolution is 1280x1024) so there is a bit of overlap. However whenever I move the mouse to the bottom of screen0, the pointer appears at the upper left of screen1. And, the entire top of screen1 is permeable to the mouse and brings it to the lower left corner of screen0. I have tried various numbers in following the "relative" statement - if I put 1280 1024 the mouse does not cross over at all. If I use 1280 1023 the entire right side of screen0 is permeable. I haven't been able to find any documentation about how to explicitly tell the mouse where to crossover - is there some? It seems that xorg is being really aggressive in guessing where the mouse crossover should take place. Does anyone know how to do this? Thanks!

  Read the article

• monitor height differences & the mouse going off screen

  - by fastmultiplication

  In ubuntu 10.10 I have a dual monitor setup. I have an nVidia graphics card and am using twinview. One of the monitors is 1024 pixels high and the other is 900. In the monitor configuration screen & in real life, I have them set up side by side, 1024 on the left. The result of this is that when I am on the bottom of the left monitor and move the mouse to the right, it goes into the hidden area below the right monitor's visible area. It seems like it would make a lot more sense for it to be bumped up to the bottom of the right monitor - since one almost never wants to move the mouse into an area of the screen that doesn't show up. And, systems I have used before have been set up that way. How can I set this up? I am not interested in lists of window managers for ubuntu; I would like to know the identity of a particular WM or set of steps I can take to solves the particular problem I have outlined above. Thanks! EDIT: I changed to use two seperate X window monitors, and set them up relatively positioned so that just the corner touches and the mouse can cross there, so the difference in heights doesn't matter.

  Read the article

• Dual monitor Unity launcher opening on wrong monitor in 11.10

  - by user26381

  I just upgraded to Oneiric and now the Unity Dash launcher is on my left screen. I really want it on my right screen. But how do I do that? Why do I want the Dash on my right screen? My left screen is a smaller older monitor that I use to read/watch documentation or keep my music player open. I work on my right screen, that is bigger and is a better monitor. I have an Nvidia card and in the nvidia settings it is setup that the right monitor is my primary monitor, but Oneiric doesn't follow this setting anymore. I thought this was a bug, but is seems to be intended behavior... https://bugs.launchpad.net/ubuntu/+source/unity/+bug/742544 Some poster in this thread explains that he "patched it locally", but I have no idea how to do this. Does somebody know how to do this? Or maybe there is another solution?

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• Why when I log in my two screens shows the same image automatically?

  - by forellana

  When I log in on my computer, first my two monitors shows their own part of a larger desktop, then automatically changes to the same image on both screens, but I don't want to happen this, Is there any configuration to avoid this? About my hardware: 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)

  Read the article

• How can I stop the panel from showing on an external projector/monitor?

  - by hellocatfood

  In Ubuntu 10.10 (and possibly previous versions), when I connected my laptop to an external source (monitor/projector) and set it not to clone my desktop the display on the external source would not show the (gnome-)panel (just a full-screen desktop with no icons). Since upgrading to Ubuntu 11.04 (using Unity) when I now connect the external source has the panel on there. Is there any way to revert to the previous behaviour in 11.04?

  Read the article

• Domain mapping issues

  - by Nadya

  I have two domain names - .com & .co.uk bought with 123-reg and just one student Windows hosting pack associated with the .co.uk domain. The .com domain is the main one which people would be trying to access, so I just mapped the domain to the hosting this morning. The problem is that I would really like it to be functional by tomorrow morning and the usual waiting time is 24-48 hours. Is there point in stopping the process and trying with forward it with CNAME record instead, does it take less time? (I can just go back and do proper domain mapping during the weekend) Also, is there a possible way to check whether the domain mapping has been done correctly before these 24-48 hours? From some computers I get 404 Error on homepage.

  Read the article

• How to configure screens in console or create screen configuration profiles?

  - by uncle Lem

  I have two monitors and integrated GPU (Intel® HD Graphics 4600). It works fine for work or movies, but if I launch games in fullscreen mode - I get artifacts, glitches and so on. Temporary disabling second monitor solve this problem, but then I have to enable it back, and set its properties manually (by default, additional screen attaches its left-top corner to main monitor's right-top corner, but I need it to be left-bottom and right-bottom corners). So I need some kind of automatization here. Best option - tool to create and swap between some kind of config profiles. Or, maybe, some console manipulations which I can put into script files would be fine too. (Ubuntu 13.04, if it matters)

  Read the article

• Does lesser wide screen fit better than a large one?

  - by artaxerxe

  About 3 weeks ago I changed my job. At the former workplace, I had 2 monitors for doing programming (GUI and core programming). Here, at the place where I am, the administrators gave me a laptop (15.6 inch) and wanted to provide me a wider screen additional to the laptop's one. I said that for now I want to test as it is, with the laptop's screen. I also want to mention, that in the current job I'm not targeted for GUI development. My feeling until now (but it can be just a feeling) is that working on this single not so wide screen, I'm not so weary after a full day work as I was with 2 wide monitors. Does anyone have any recommendations on this problem? Does lesser screens (in my case exclusively 15.6 inch vs 20 inch screens) affect your eyes? If anyone have any knowledge about, please feel free to say what's your opinion. P.S. I think that's a good site for this kind of question. Otherwise, please guide me on what site from StackExchange should I put it. Thanks.

  Read the article

• Dual-Monitor layout and primary display with Nvidia in Gnome-Shell

  - by java4fun

  I have installed Ubuntu 14.04.1 with gnome-shell version 3.10.4. I can attach a second monitor to my laptop and it is recognized. If I configure it with the nvidia-settings at the right of my laptop then all works fine (the extention of the display works as an extention on the right, not dual). Now what I want is to have the second monitor configured over the laptop-display. When I'm not using gnome-shell, it works correct (I can drag an application from the bottom display to the top normally) but with gnome-shell I have to press Ctrl+Shift+ mouse help, and resize properly the application size. This is for me an enforcing. Is there a way to make that gnome-shell work properly with a bottom/top monitor?

  Read the article

• Ubuntu 12.10 - Dual monitors

  - by crazy coder

  I'm trying to set up a dual monitor with my laptop (Dell XPS L502X) and a monitor that I recently bought (Dell U2312HM). The cable are alright, because I tried this on Windows and all is fine. In Ubuntu 12.10 doesn't work. If I go to System Settings-Displays, button Detect Displays doesn't do anything. I may also say that I use Bumblebee, and my sudo nvidia-settings command only shows a windows with only nvidia-setting Configuration option.

  Read the article

• ubuntu 13.10 secondary monitor - doesn't redraw properly

  - by Daniel

  Hi I've just installed Ubuntu 13.10 on a Lenovo w350 and am having some issues with graphics driver. standard nouveau drivers work great on the laptop display but when I attach an external display it goes bad on the external monitor, seems it's not re-drawing properly. (Photo attached). I've tried other drivers but none of them detect the external monitor when connected. Any ideas? 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1) screenshot of effected monitor -- http://i.imgur.com/UZWMpQO.jpg UPDATE 1: I have noticed that if I leave the System Monitor open the display improves. Wierd. UPDATE 2: If I leave a video going the lag/flicker issues stop.

  Read the article

• Multi Monitor Setup Problems

  - by Shamballa

  I have Ubuntu 10.04 LTS - the Lucid Lynx. I have until recently been using a nVida Graphics card (NVIDIA GeForce 9800 GT) with two monitors attached, this all worked fine and dandy. A couple of days ago I bought two new identical LCD monitors for a multi monitor setup and two ATI graphics cards (ATI Sapphire Radeon HD5450). NOTE *All monitors work fine in Windows XP, 2k, Vista and 7 After I had booted into Ubuntu only one display came on, that I kind of expected anyway, then I removed the driver for the nVidia card and downloaded the ATI version which gave me the ATI Catalyst Control Center - in that only two of the displays were showing the third was disabled and showing unknown driver. I enabled the third monitor that stated "Unkown Driver" and had to reboot, upon reboot none of the displays work. I restarted and booted up into recovery mode and from now that is only what I can get into using a failsafe driver. It seems according to the log that a server is already active for Display 0 and I have to remove /tmp/.X0-lock and start again. This is what the log file is saying: Fatal Server Error Server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again. (WW) xf86 closeconsole: KDSETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETSTATE failed: Bad file descriptor ddxSigGiveUp: closing log I have tried looking at my xorg.config file but unfortunately I have not really got a clue as to how it "should" be - I have tried regenerating it using this command from a terminal: sudo dpkg-reconfigure -phigh xserver-xorg but that had no effect so I am currently stuck in failsafe driver mode but two monitors are active but are mirroring each other. I hope that this is not to long - looking back I have been going on a bit! but I am just trying to explain as much as I can... I have asked this on Linuxquestions but nobody seems to know either or at least I have not had any responses. Could some kind soul please help explain what I can do from here? I would be eternally grateful. Chris * Update * Removing xorg.conf does nothing other than allowing me to use only two monitors - using the command: sudo aticonfig --initial generates the xorg.conf file below: but does not work either - I just get two monitors... Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I have tried using this command from a thread on the Ubuntu Forums with a question similar to mine: sudo aticonfig --initial=dual-head --adapter=all Generated xorg.conf file Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-1" Screen "aticonfig-Screen[1]-1" RightOf "aticonfig-Screen[1]-0" EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-1" Driver "fglrx" BusID "PCI:2:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" Monitor "aticonfig-Monitor[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-1" Device "aticonfig-Device[1]-1" Monitor "aticonfig-Monitor[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection This upon reboot renders ALL monitors blank and I have to go into recovery mode and use a failsafe driver. This is so much harder than I thought it would be, I don't think Ubuntu likes ATI for multi (3) monitors or maybe the other way around. Can anyone help still?

  Read the article

• Dual Screens not working nVidia

  - by user91396

  So I'm very much an Ubuntu noob, in fact I just install Ubuntu to my P.C. and I started it up with both my screens plugged into my nVidia's dvi and vga ports and logged in, change the skin to classic gnome, because that's how it was when I last used Ubuntu (8.1), and both screens were working separately. The trouble is that I got a notification saying there was nVidia drivers to be installed, so I install them and restart my P.C., as it told me to, and when I get back on only one of my screens is working and when I go into Displays (All Settings, Displays) it doesn't register my other screen at all, and it calls my working screen "Laptop". I've tried looking through several pages of Google but I see no answer. I did try to find the nvidia-settings to see if that had the answers but sadly I couldn't locate it. Thanks in advance for any help, but please remember, I am very new to Ubuntu.

  Read the article

• External HDMI poor quality

  - by paschoal

  When pluging an external HDMI display, it get detected and everything was supposed to be working right out of the box, except that when set the resolution to 1920x1080, the display on HDMI is really poor quality. Playing around with xrandr, when setting resolution at 1680x1050 or below, everything is smooth, when setting 1920x1080 or 1920x1080i, with wide variety of refresh rates, it's the same poor quality display. Unfortunely I can't post an image showing the exactly issue (low reputation). Specifications: Dell Inspiron 14 (Intel HD Graphics) Samsung TA550

  Read the article

• Debian Wheezy: installing from sources or repositories? upgrading to new software release?

  - by user269842

  a. I'm wondering for some software if it is wiser to install them from sources or from official repositories when available like: glpi inventory fusion inventory monitoring tools like nagios I tried both for glpi: compiled from sources and installing from repositories. I also installed zabbix from sources. b. What about new software releases providing enhancements: is it better to keep the release installed from the repositories /compiled or is their a 'best practice' like downloading the new software release and compiling it again (I really have no clue)? Could someone make it more clear for me? Thanks!

  Read the article

• Different set of workspaces for each monitor? Ubuntu 13.04 with Unity

  - by Darren

  currently for my new setup, I have a 3 monitor setup. With an NVIDIA Geforce GTX 770(if this matters for this). What I'm wanting to do, is to create a separate set of workspaces for each monitor. For instance: Monitor 1 has a set of 4 workspaces, that are specific to monitor 1, and change independently of the other monitors. Then the other 2 monitors also have their own set of 4 workspaces. So in total I would have 12 workspaces, but each monitor would have it's own set of 4 that work independently from the others. I've read things about Xmonad and Xinerama, but I'm not really sure where to go from here. I haven't ventured to far into different window managers and everything. I'm sure there's not a tool that does this, but if someone could point me in the right direction(I've been using Ubuntu for about 4 years so I can figure some things out on my own too).

  Read the article

• On a dual monitor setup, how can I set which lone monitor the ALT-TAB interface appears?

  - by conner_bw

  On a dual monitor setup, how can I set which monitor the ALT-TAB (or ALT+`) interfaces appear? Right now, it's flying all over the place, possibly based on on which app is focused? I'm not sure. In any case this is not useful to me. I spend 80% of my time staring at the monitor in front of me, and sometimes I turn my head to the left to look at logs, or whatever. When I press ALT-TAB or ALT+`, I want the interface to appear, 100% of the time, on the monitor in front of me. Geforce GT 430, NVIDIA binary drivers, Ubuntu 12.04 LTS. Help?

  Read the article

• Usb/vga not recognized anymore

  - by Peter Raeves

  I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

  Read the article

• Double X-screens on one monitor

  - by user75226

  I have two monitors connected currently, my laptop display and an old dell monitor. For some reason one monitor (the dell) has double everything (it will make sense when you see the image). I think it came about when one day I tried using separate x-screen instead of just twin view for a specific reason I don't remember why (I was trying to get the Menu bar to show on my laptop monitor instead of the Dell I believe, it only shows up on the left-most monitor it seems) but anyhow I was wondering if anyone can help me fix this issue. Thanks.

  Read the article

• How do I reset my display settings from the command line?

  - by Trevor

  I'm running 12.10 on a dell e5400 laptop and I used xrandr to get the dual monitors working that I connect through a laptop dock. I used xrandr again to switch back to the laptop display when I undocked. The problem is, after a restart, the laptop seems to want to come back up with the dual monitor configuration and the laptop screen stays blank. I can boot into single user mode but I'm not sure what to do from there to get the display settings reset. Any ideas? There's no xorg.conf file so I'm not sure where the settings are stored anymore. Thanks.

  Read the article

• Triple monitors on hybrid video system GeForce+Intel

  - by v_mil

  I use Lenovo Ideapad Z580A with hybrid video: GeForce+Intel with Ubuntu 12.10 x64 Ukrainian. It has internal display and two outputs: HDMI and VGA. When I connect third display to VGA all displays go black. Pressing alt+backspace and login causes output to two displays: internal and VGA. System Settings - Displays (or monitors - I have Ukrainian interface) shows three displays: two are on, one (DVI) is off. Turning DVI on and pressing apply causes an error: Can not set configuration of controller CRTC 65. BIOS setting is Optimus (two video cards). Driver for GeForce is Nouveau. With best regards. Viktor.

  Read the article

• Triple Monitor Setup with Nvidia and Compiz

  - by AndrewX192

  I have a triple monitor setup with two video cards on Ubuntu 10.04. I have the monitors and graphics cards currently setup as follows: Nvidia Geforce 210 #1 - 1920x1080 Monitor (Twinview) [Center - Monitor #1] - 1920x1080 Monitor (Twinview) [Right - Monitor #2] Nvidia Geforce 210 #2 - 1920x1080 Monitor (Separate X Screen) [Left - Monitor #3] This works fine, except when I open a program, it shows up in between monitor #1 and #2 - meaning I have to drag it to one screen before I can use the window. Gnome2's gnome-panel also does not work on the twinview setup; it spans between both monitors, but it does not redraw (ex: the clock never changes). In addition, when I maximize an application, it spans both monitors, which is not acceptable. When I enable Xinerama for my setup, gnome-panel no longer spans two monitors, and applications maximize as expected, but compiz does not work, as X11 compositing is not available. The lack of desktop compositing causes problems with dragging windows between screens (redraws take forever). Is there anything I can do to fix these issues without opting for different graphics cards?

  Read the article

• How to force GNOME panels et. al. to display on a different monitor without mirroring?

  - by GrueKun

  So, I recently purchased a new 23" monitor for my PC. However, I can't use it with the PC currently as I am waiting on a replacement heatsink. In the mean time, I wanted to use it with my Dell laptop. I hooked it up to the VGA port, and it seems to be working properly. However, I wanted to know if there was a way I could move all of the main display elements over to the attached monitor? I wanted to shut the LCD panel off on the laptop and hook it up like a desktop. Relevant specs: Ubuntu 10.10 x64 Intel graphics chipset The attached monitor is currently set as the default monitor. Any suggestions are welcome. :)

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >