php parser - Page 43 - Developer IT

Installing Nginx With PHP 5.3 And PHP-FPM On Ubuntu Lucid Lynx (10.04)

HowtoForge: "In this post I will explain how to install Nginx with PHP 5.3.2 and PHP-FPM on Ubuntu Lucid Lynx (10.04-amd64)."

Wiki .NET Parser C#, 3 (4) files with lexer, grammar, parser definition and ANTLR engine...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

nginx php5-fpm "File not found" -- FastCGI sent in stderr: "Primary script unknown"

- by jmfayard

so I'm trying to run for the first time the nginx web server with php5-fpm on a debian wheezy server Hitting a php file display simply File not found I have done my research (waste a lot of hours actually ;), there are a lot of people that have similar problems, yet I didn't succeed to correct it with what worked for them. I still have the same error : $ tail /var/log/nginx/access.log /var/log/nginx/error.log /var/log/php5-fpm.log | less == /var/log/nginx/error.log <== 2013/10/26 21:36:00 [error] 6900#0: *1971 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, I have tried a lot of things, it's hard to remember what. I have put my config files on github my /etc/nginx/nginx.conf my /etc/php5/fpm/php-fpm.conf Currently, the nginx.conf configuration uses this... server { server_name mydomain.tld; root /srv/data1/test; location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } /etc/php5/fpm/pool.d/www.conf contains listen = 127.0.0.1:9000 I have tried the unix socket version, same thing. fastcgi_pass unix:/var/run/php5-fpm.sock; I made sure the server is started $ netstat -alnp | grep LISTEN tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 6913/php-fpm.conf) tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 4785/mysqld tcp 0 0 0.0.0.0:842 0.0.0.0:* LISTEN 2286/inetd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2812/rpcbind tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 5710/nginx tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2560/sshd tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 5710/nginx tcp6 0 0 :::111 :::* LISTEN 2812/rpcbind unix 2 [ ACC ] STREAM LISTENING 323648 6574/tmux /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 619072 6790/fcgiwrap /var/run/fcgiwrap.socket unix 2 [ ACC ] SEQPACKET LISTENING 323 464/udevd /run/udev/control unix 2 [ ACC ] STREAM LISTENING 610686 2812/rpcbind /var/run/rpcbind.sock unix 2 [ ACC ] STREAM LISTENING 318633 4785/mysqld /var/run/mysqld/mysqld.sock Each time I modify the nginx.conf file, I make sure to relaunch this command nginx -t && nginx -s reload && echo "nginx configuration reloaded" and same thing for php5-fpm /etc/init.d/php5-fpm restart Thanks for your help :-)

Read the article

Nginx + PHP-FPM = "Random" 502 Bad Gateway

- by david

I am running Nginx and proxying php requests via FastCGI to PHP-FPM for processing. I will randomly receive 502 Bad Gateway error pages - I can reproduce this issue by clicking around my PHP websites very rapidly/refreshing a page for a minute or two. When I get the 502 error page all I have to do is refresh the browser and the page refreshes properly. Here is my setup: nginx/0.7.64 PHP 5.3.2 (fpm-fcgi) (built: Apr 1 2010 06:42:04) Ubuntu 9.10 (Latest 2.6 Paravirt) I compiled PHP-FPM using this ./configure directive ./configure --enable-fpm --sysconfdir=/etc/php5/conf.d --with-config-file-path=/etc/php5/conf.d/php.ini --with-zlib --with-openssl --enable-zip --enable-exif --enable-ftp --enable-mbstring --enable-mbregex --enable-soap --enable-sockets --disable-cgi --with-curl --with-curlwrappers --with-gd --with-mcrypt --enable-memcache --with-mhash --with-jpeg-dir=/usr/local/lib --with-mysql=/usr/bin/mysql --with-mysqli=/usr/bin/mysql_config --enable-pdo --with-pdo-mysql=/usr/bin/mysql --with-pdo-sqlite --with-pspell --with-snmp --with-sqlite --with-tidy --with-xmlrpc --with-xsl My php-fpm.conf looks like this (the relevant parts): ... <value name="pm"> <value name="max_children">3</value> ... <value name="request_terminate_timeout">60s</value> <value name="request_slowlog_timeout">30s</value> <value name="slowlog">/var/log/php-fpm.log.slow</value> <value name="rlimit_files">1024</value> <value name="rlimit_core">0</value> <value name="chroot"></value> <value name="chdir"></value> <value name="catch_workers_output">yes</value> <value name="max_requests">500</value> ... I've tried increasing the max_children to 10 and it makes no difference. I've also tried setting it to 'dynamic' and setting max_children to 50, and start_server to '5' without any difference. I have tried using both 1 and 5 nginx worker processes. My fastcgi_params conf looks like: fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200; Nginx logs the error as: [error] 3947#0: *10530 connect() failed (111: Connection refused) while connecting to upstream, client: 68.40.xxx.xxx, server: www.domain.com, request: "GET /favicon.ico HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "www.domain.com" PHP-FPM logs the follow at the time of the error: [NOTICE] pid 17161, fpm_unix_init_main(), line 255: getrlimit(nofile): max:1024, cur:1024 [NOTICE] pid 17161, fpm_event_init_main(), line 93: libevent: using epoll [NOTICE] pid 17161, fpm_init(), line 50: fpm is running, pid 17161 [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17162 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17163 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17164 started [NOTICE] pid 17161, fpm_event_loop(), line 111: ready to handle connections My CPU usage maxes out around 10-15% when I recreate the issue. My Free mem (free -m) is 130MB I had this intermittent 502 Bad Gateway issue when in was using php5-cgi to service my php requests as well. Does anyone know how to fix this?

Read the article

ez components and AWS PHP SDK makes ez components freak out

- by David

Hi, I try to work with ez Components and AWS PHP SDK at the same time. I have a file called resize.php which is just handling resizing images using the ez Components ImageTransition tools. I queue the image for resize in Amazon AWS SQS. If I load the AWS PHP SDK and ez Components in the same file, PHP always complains about not finding the ez Components classes. Code looks something like this: amazonSQS.php: require 'modules/resize.php'; require 'modules/aws/sdk.class.php'; $sqs = new AmazonSQS(); $response = $sqs->send_message($queue_url, $message); resize.php: function resize_image($filename) { $settings = new ezcImageConverterSettings( array( //new ezcImageHandlerSettings( 'GD', 'ezcImageGdHandler' ), new ezcImageHandlerSettings( 'ImageMagick', 'ezcImageImagemagickHandler' ), ) ); Error message: Fatal error: Class 'ezcImageConverterSettings' not found in /home/www.com/public_html/modules/resize.php on line 10 If I call resize.php from another PHP file which has AWS not included, it works fine. I load ezComponents like this: require 'ezc/Base/ezc_bootstrap.php'; It is installed as a PEAR package. Any idea someone?

Read the article

How to get elements from a page using Simple HTML DOM Parser

- by sm56d

Hi I am trying to parse a HTML page using the Simple HTML DOM Parser. This HTML page doesn't make use of IDs which makes it harder to refer to elements. On this page I am trying to get the Album name, Song title, download link and the album image. I have done this but I can't even get the Album names! $html = file_get_html('http://music.banadir24.com/singer/aasha_abdoo/247.html'); $article = $html->find('table td[class=title]', 0); foreach($article as $link){ echo $link; } This outputs: 1tdArrayArrayArray Artist Array I need to get this sort of output: Image Path Duniya Jamiila [URL] Macaan Badnoo [URL] Donimaayee [URL] ... Thanks all for any help Please note: This is legal as the songs are not bound by copyright and they are available to download freely, its just I need to download a lot of them and I can't sit there clicking a button all day. Having said that, its taken me an hour to get this far.

Read the article

'echo' or drop out of 'programming' write HTML then start PHP code again

- by thecoshman

For the most part, when I want to display some HTML code to be actually rendered I would use a 'close PHP' tag, write the HTML, then open the PHP again. eg <?php // some php code ?> HTML that I want displayed <?php // more php code ?> But I have seen lots of people who would just use echo instead, so they would have done the above something like <?php // some php code echo("HTML that I want displayed"); // more php code ?> Is their any performance hit for dropping out and back in like that? I would assume not as the PHP engine would have to process the entire file either way. What about when you use the echo function in the way that dose not look like a function, eg echo "HTML that I want displayed" I would hope that this is purely a matter of taste, but I would like to know if I was missing out on something. I personally find the first way preferable (dropping out of PHP then back in) as it helps draw a clear distinction between PHP and HTML and also lets you make use of code highlighting and hinting for your HTML, which is always handy.

Read the article

nginx + php-fpm cycle redirection error on linode new vps

- by chifliiiii

I'm new to nginx, and I'm trying to make my first server run. I followed this guide as I'm trying to use it for a multisite wordpress site. After installing everything, I get a 500 Internal server error. If I check logs, I see this: 012/09/27 08:55:54 [error] 11565#0: *8 rewrite or internal redirection cycle while internally redirecting to "/index.html", client: xxx.xxx.xxx.xxx, server: localhost, request: "GET /favicon.ico HTTP/1.1", host: "www.mydomain.com" 2012/09/27 08:59:32 [error] 11618#0: *1 rewrite or internal redirection cycle while internally redirecting to "/index.html", client: xxx.xxx.xxx.xxx, server: localhost, request: "GET /phpmyadmin HTTP/1.1", host: "www.mydomain.com" My conf files are the following: nano /etc/nginx/sites-available/mydomain.com server { listen 80 default_server; server_name mydomain.com *.mydomain.com; root /srv/www/aciup.com/public; access_log /srv/www/mydomain.com/log/access.log; error_log /srv/www/mydomain.com/log/error.log; location / { index index.php; try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # Directives to send expires headers and turn off 404 error logging. location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 24h; log_not_found off; } # this prevents hidden files (beginning with a period) from being served location ~ /\. { access_log off; log_not_found off; deny all; } # Pass uploaded files to wp-includes/ms-files.php. rewrite /files/$ /index.php last; if ($uri !~ wp-content/plugins) { rewrite /files/(.+)$ /wp-includes/ms-files.php?file=$1 last; } # Rewrite multisite '.../wp-.*' and '.../*.php'. if (!-e $request_filename) { rewrite ^/[_0-9a-zA-Z-]+(/wp-.*) $1 last; rewrite ^/[_0-9a-zA-Z-]+.*(/wp-admin/.*\.php)$ $1 last; rewrite ^/[_0-9a-zA-Z-]+(/.*\.php)$ $1 last; } location ~ \.php$ { client_max_body_size 25M; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include /etc/nginx/fastcgi_params; } } nano /etc/nginx/nginx.conf user www-data; worker_processes 4; worker_cpu_affinity 0001 0010 0100 1000; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 2048; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; tcp_nopush on; keepalive_timeout 5; tcp_nodelay on; server_tokens off; gzip on; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Any help will be appreciated.

Read the article

Include error in writing html file from php

- by Grozav Alex Ioan

I seem to have some problem with my code here. It creates a file from the php file, but I get an error on the include path. include('../include/config.php'); $name = ($_GET['createname']) ? $_GET['createname'] : $_POST['createname']; function buildhtml($strphpfile, $strhtmlfile) { ob_start(); include($strphpfile); $data = ob_get_contents(); $fp = fopen ($strhtmlfile, "w"); fwrite($fp, $data); fclose($fp); ob_end_clean(); } buildhtml('portfolio.php?name='.$name, "../gallery/".$name.".html"); The problem seems to be here: 'portfolio.php?name='.$name Any way I can replace this, and still send the variable over? Here's the error I get when I put ?name after the php extension: Warning: include(portfolio.php?name=hyundai) [function.include]: failed to open stream: No such file or directory in D:\Projects\Metro Web\Coding\admin\create.php on line 15 Warning: include(portfolio.php?name=hyundai) [function.include]: failed to open stream: No such file or directory in D:\Projects\Metro Web\Coding\admin\create.php on line 15 Warning: include() [function.include]: Failed opening 'portfolio.php?name=hyundai' for inclusion (include_path='.;C:\php\pear') in D:\Projects\Metro Web\Coding\admin\create.php on line 15

Read the article

Unable to render php files in browser

- by p1

Hello, I am very new to php, and I am trying to develop a facebook application using php. I am using Joyent as my hosting platform. Currently, I am trying to do some simple scripts in php and then build on them. However I am unable to see any php files being rendered properly in my application. For eg: I have a simple script called phpinfo.php: If I execute this on terminal like php phpinfo.php , I can see all the configurations. However if I try to access the same file as http://xxxxxx.facebook.joyent.us/phpinfo.php, I get : Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Even if I rename this file to index.php its still the same. However I am able to access other html files [index.html] on the same location . These are some of my php settings: These are some of the settings: [fbkusoni:~/web/public] aafhe7vh$ php phpinfo.php | grep On allow_url_fopen = On = On auto_globals_jit = On = On enable_dl = On = On file_uploads = On = On ignore_repeated_errors = On = On ignore_repeated_source = On = On implicit_flush = On = On log_errors = On = On register_argc_argv = On = On report_memleaks = On = On y2k_compliance = On = On Multibyte regex (oniguruma) backtrack check = On mysql.allow_persistent = On = On session.bug_compat_warn = On = On session.use_cookies = On = On suhosin.cookie.cryptdocroot = On = On suhosin.cookie.cryptua = On = On suhosin.mt_srand.ignore = On = On suhosin.protectkey = On = On suhosin.server.encode = On = On suhosin.server.strip = On = On suhosin.session.cryptdocroot = On = On suhosin.session.cryptua = On = On suhosin.session.encrypt = On = On suhosin.srand.ignore = On = On suhosin.stealth = On = On The answer might be very naive, but I am just trying to get started and looking for any suggestions regarding this and also using Joyent and cakephp to develop facebook applications. Thanks.

Read the article

Wear and tear on server hard drive from filesystem polling by PHP script

- by jackie

So I'm working on a discussion platform, and various clients will visit http://host/thread.php, which will render the discussion thread to date in addition to a form to submit a new post. When a new post is submitted, I would like all of the other clients with browser windows open to have it appear in near-real-time. One of the constraints of my script is that it may not use a DBMS and it must stay in the filesystem. Additionally, I can't use any PECL/PEAR extensions like inotify or anything like that for IPC. The flow will look like this: Client A requests thread.php and the thread is so far empty, but nonetheless it opens a Server-Side Event at eventPusher.php. Client B does the same. Client A fills out a post in the form and and submits (POSTs) it to subHandler.php. ??? (subHandler stores the new submission into the main thread storefile which gets read from when a fresh, new client requests thread.php, in addition to somehow signalling to the continually-running eventPusher event-source that a new comment was posted and that it should echo the event-json to the client. How, exactly, it will send this signal I'm yet unsure of, but there are a few options that I've thought of -- this is the crux of the question, so see below for more clarification) eventPusher.php happily pushes the new event to the client and it shows up soon after it was originally submitted on all clients who have the page open's screens. Now for the #4 missing-link mystery-step, I see a few problems. I mean, either way, eventPusher is gonna be doing a while loop of some sort -- it's gonna be polling something, I think that much is clear. (If that's a bad assumption please do let me know.) Now, the simplest way would be subHandler gets invoked on the form submission, writes it to the main store in addition to newComments.xml, then exits without doing anything else. Then eventPusher checks in newComments.xml every X seconds (by the way, what would be a reasonable time interval here?) and if it finds something then it emits an event to the client. Now, my fear with this is that the server's hard drive will have to constantly start spinning up. Maybe this isn't the case, perhaps it would just get cached in RAM and the linux kernel would take care of this transparently such that filesystem access doesn't actually engage the device because the kernel knows that that particular file hasn't changed since last read. * idea #2: I have no idea how to go about this, but perhaps there is a variable scope that gets stored in general RAM on the system which can be read by any process. Like if we mega-exported a bash variable so that $new_post is normally false but it gets toggled to true by subHandler, and then back to flase once it's pushed to the client. I doubt there's such a variable scope in PHP directly, but I struggle with the concept of variable scope, I just can't seem to understand it no matter what I read on it. * idea #3: eventPusher queries ps in its whileloop for another instance of itself. If there's not another eventPusher active then it's highly unlikely that new comments will be getting submitted. It's okay if this only works =90% of the time, it doesn't need to be completely foolproof. * idea #4: eventPusher queries DMESG to see if that file's been written to recently. So to sum everything up, I need to have inter-php-script-communication in near-real-time that will work on a standard mod_php shared hosting setup without any elevated privileges, PHP addon modules, or other system adjustments that can't be done from the PHP script itself at runtime. With*out* spinning up the drive more than a few times. No SQL servers either. Apologies if my english isn't the best, I'm still trying to improve on it.

Read the article

New to php and need to format a php page from html statement

- by Peter D

My problem is the page shows a vertical line of options. I want to put them into a 4 column table to display instead of just down lhs of page. The code I want to change is as follows: </tr> <tr> <td>{LOOP: JOBTYPE} IF("{JOBTYPE.parent_id}"!="0"){  {:IF} IF("{JOBTYPE.catcount}"=="0"){<input type="checkbox" name="jobtype[{JOBTYPE.id}]" value="{JOBTYPE.id}" {JOBTYPE.selected}>{JOBTYPE.title} {:IF} IF("{JOBTYPE.catcount}"!="0"){{JOBTYPE.title} {:IF} {/LOOP: JOBTYPE}</td> </tr> <tr> <td> </td> </tr> As you can see I have another column there and can split cell further but i would like the job list to be displayed accross the page not vertically. Thank you in advance, Peter

Read the article

PHP - complete url parser help

- by Mark

I have been trying to find an effective url parser, php's own does not include subdomain or extension. On php.net a number of users had contributed and made this: function parseUrl($url) { $r = "^(?:(?P<scheme>\w+)://)?"; $r .= "(?:(?P<login>\w+):(?P<pass>\w+)@)?"; $r .= "(?P<host>(?:(?P<subdomain>[-\w\.]+)\.)?" . "(?P<domain>[-\w]+\.(?P<extension>\w+)))"; $r .= "(?::(?P<port>\d+))?"; $r .= "(?P<path>[\w/]*/(?P<file>\w+(?:\.\w+)?)?)?"; $r .= "(?:\?(?P<arg>[\w=&]+))?"; $r .= "(?:#(?P<anchor>\w+))?"; $r = "!$r!"; // Delimiters preg_match ( $r, $url, $out ); return $out; } Unfortunately it fails on paths with a '-' and I can't for the life of me workout how to amend it to accept '-' in the path name. Thanks

Read the article

Selecting Date Range on a PHP form and displaying results from MySQL database

- by Sarah HSL

This may be something simple but I cant understand why this wouldn't work.. I have a php form where you can select a date range from drop downs. I've given the field names day, month year, and day1, month1, year1. When clicking submit it takes you to a second php form. Here is the code for second form: <?php $username="***"; $password="***"; $database="****"; mysql_connect('localhost',$username,$password); @mysql_select_db($database) or die( "Unable to select database"); $day = $_GET['day']; $month = $_GET['month']; $year = $_GET['year']; $day1 = $_GET['day1']; $month1 = $_GET['month1']; $year1 = $_GET['year1']; $date1 = "$year-$month-$day"; $date2 = "$year1-$month1-$day1"; $query = "SELECT * FROM main_stock WHERE curr_timestamp BETWEEN '$date1' AND '$date2'"; $result=mysql_query($query); $num=mysql_num_rows($result); ?> <table border="1" cellspacing="2" cellpadding="2"> <tr> <td>Product Description</td> <td>Category</td> <td>Master Category</td> <td>Barcode</td> <td>Status</td> <td>TimeStamp</td> <td>New Own</td> <td>Serial No.</td> </tr> <?php $i=0; while ($i < $num) { $f1=mysql_result($result,$i,"product_desc"); $f2=mysql_result($result,$i,"category"); $f3=mysql_result($result,$i,"mastercategory"); $f4=mysql_result($result,$i,"barcode"); $f5=mysql_result($result,$i,"status"); $f6=mysql_result($result,$i,"curr_timestamp"); $f7=mysql_result($result,$i,"newown"); $f8=mysql_result($result,$i,"serial"); ?> <tr> <td><?php echo $f1; ?></td> <td><?php echo $f2; ?></td> <td><?php echo $f3; ?></td> <td><?php echo $f4; ?></td> <td><?php echo $f5; ?></td> <td><?php echo $f6; ?></td> <td><?php echo $f7; ?></td> <td><?php echo $f8; ?></td> </tr> <?php $i++; } $num_rows = mysql_num_rows($result); echo "$num_rows Rows\n"; mysql_close(); ?> Is there any reason this wouldn't work? I'm not sure where I am going wrong. It displays results when there is another option as well as the date such as 'status' but when this is taken out and I just want to display all the results between the date range it doesn't work.. This works: <?php $username="+++"; $password="+++"; $database="+++"; mysql_connect('localhost',$username,$password); @mysql_select_db($database) or die( "Unable to select database"); $day = $_GET['day']; $month = $_GET['month']; $year = $_GET['year']; $day1 = $_GET['day1']; $month1 = $_GET['month1']; $year1 = $_GET['year1']; $status = $_GET['status']; $date1 = "$year-$month-$day"; $date2 = "$year1-$month1-$day1"; $query = "SELECT * FROM main_stock WHERE status = '$status' AND curr_timestamp BETWEEN '$date1' AND '$date2'"; $result=mysql_query($query); $num=mysql_num_rows($result); ?> <table border="1" cellspacing="2" cellpadding="2"> <tr> <td>Product Description</td> <td>Category</td> <td>Master Category</td> <td>Barcode</td> <td>Status</td> <td>TimeStamp</td> <td>New Own</td> <td>Serial No.</td> </tr> <?php $i=0; while ($i < $num) { $f1=mysql_result($result,$i,"product_desc"); $f2=mysql_result($result,$i,"category"); $f3=mysql_result($result,$i,"mastercategory"); $f4=mysql_result($result,$i,"barcode"); $f5=mysql_result($result,$i,"status"); $f6=mysql_result($result,$i,"curr_timestamp"); $f7=mysql_result($result,$i,"newown"); $f8=mysql_result($result,$i,"serial"); ?> <tr> <td><?php echo $f1; ?></td> <td><?php echo $f2; ?></td> <td><?php echo $f3; ?></td> <td><?php echo $f4; ?></td> <td><?php echo $f5; ?></td> <td><?php echo $f6; ?></td> <td><?php echo $f7; ?></td> <td><?php echo $f8; ?></td> </tr> <?php $i++; } $num_rows = mysql_num_rows($result); echo "$num_rows Rows\n"; mysql_close(); ?> But when the 'status' field is taken out (and obviously the serial drop down in the first form) it stops working...

Read the article

PHP - How to retrieve session in php

- by Klaus Jasper

I created a table that contains id - names - jobs and page that shows the names only and beside each name there is button Job and session that contains the id. this is my code $query = mysql_query("SELECT * FROM table"); while($fetch = mysql_fetch_array("$query")){ $name = $fetch['names']; $id = $fetch['id']; echo ''; echo $name; $_SESSION['name'] = $id; echo "<button>Job</button>"; } I want when the user click on button Job redirect to a page that contains the job of that session. so how can I do it?

Read the article

Execute a command using php under ssh2 in php

- by Mervyn

Using Mint terminal my script connects using ssh2_connect and ssh2_auth-password. When am logged in successfully I want to run a command which will give me the hardware cpu. Is there a way I can use to exec the command in my script then show the results. I have used system and exec for pinging. if i was in the terminal i do the login. then type "get hardware cpu" in the terminal it would look like this: Test~ $ get hardware cpu

Read the article

PHP mySQL query's and PHP Variables

- by jon

I'm trying to make an OO Login system for a project I'm working on, and am having trouble with inserting variables into the query strings. In the code below, if I replace "$TBL_NAME" with the actual table name it works. Why isn't $TBL_NAME translating to the value of $TBL_NAME? class UserDB { private $TBL_NAME = "users"; public static function CheckLogin($username, $password) { Database::Connect(); $username = stripslashes($username); $password = stripslashes($password); $username = mysql_real_escape_string($username); $password = mysql_real_escape_string($password); $sql="SELECT uid FROM $TBL_NAME WHERE username='$username' AND password='$password' "; $result =mysql_query($sql); $count=mysql_num_rows($result); if ($count==1) return true; else return false; } The Query is returning false.

Read the article

PHP is truncating MSSQL Blob data (4096b), even after setting INI values. Am I missing one?

- by Dutchie432

I am writing a PHP script that goes through a table and extracts the varbinary(max) blob data from each record into an external file. The code is working perfectly, except when a file is over 4096b - the data is truncated at exactly 4096. I've modified the values for mssql.textlimit, mssql.textsize, and odbc.defaultlrl without any success. Am I missing something here? <?php ini_set("mssql.textlimit" , "2147483647"); ini_set("mssql.textsize" , "2147483647"); ini_set("odbc.defaultlrl", "0"); include_once('common.php'); $id=$_REQUEST['i']; $q = odbc_exec($connect, "Select id,filename,documentBin from Projectdocuments where id = $id"); if (odbc_fetch_row($q)){ echo "Trying $filename ... "; $fileName="projectPhotos/docs/".odbc_result($q,"filename"); if (file_exists($fileName)){ unlink($fileName); } if($fh = fopen($fileName, "wb")) { $binData=odbc_result($q,"documentBin"); fwrite($fh, $binData) ; fclose($fh); $size = filesize($fileName); echo ("$fileName Done ($size) "); }else { echo ("$fileName Failed "); } } ?> OUTPUT Trying ... projectPhotos/docs/file1.pdf Done (4096) Trying ... projectPhotos/docs/file2.zip Done (4096) Trying ... projectPhotos/docsv3.pdf Done (4096) etc..

Read the article

How much PHP do I need to know to use AJAX?

- by user1146440

Hi I am interested in learning to create AJAX calls with Javascript.I already know Javascript and I would like to learn PHP at some point but at the moment I know nothing about it and I don't have the time to learn the full language. How much PHP do I need to know to be able to do AJAX calls? Can someone recommend me some good resources to get familiar with what I need to learn from PHP so I can learn AJAX.I am planing on starting to read AJAX and PHP: Building Modern Web Applications 2nd Edition but I think I need to know some basic PHP.

Read the article

Your experience with haxe and other languages that compile to PHP?

- by Kim

I would like to hear oppinions from people who have used a language that compiles to php. One such language I know is Haxe. Other ones I've read about are Kira and Pharen. How well do these languages integrate with PHP? Is it relatively easy to write a plugin for a PHP CMS in them? How mature are their implementations and tools? Would you recommend them to someone who has to use a php cms but hates php?

Read the article

[PHP] Version Changes: How considerable are the compatibility issues in project?

- by AdityaGameProgrammer

For example if we consider ActionScript2.0(based on Objects but programming does not implement much OOP ) vs 3.0(highly OOP) its like a whole new scripting language in the sense of approach, programming style,features you get the idea. In PHP we can see current versions going from 3-5. brief version changes Question :Developers who work on PHP is it easy to migrate from version to version? Question :Are there any extensive compatibility issues, forward or backward? Question :Does your project stick to a particular version till the end ? Question :Does the programming style ,approach change from version to version? Question :If you had to get started on PHP to contribute to a project built earlier versions, would learning the latest version be counterproductive towards this aim? Some related topics i had come across on SE How should I be keeping track of php script version/changes? What is happening to PHP 6? It would be Really helpful in understanding if you could answer this topic directly to the questions put forth.

Read the article

How to avoid whitespace in PHP and ASP.NET? [closed]

- by Goma

You know that the PHP interpreter avoids whitespace and comments. However, I have heared that there is something you can do to make the interpreter does not see the whitespace at all and does not even think to avoid it, the same for the compiler in ASP.NET. What is that thing? Is it a function in PHP and a class in ASP.NET? or what exactly? Edit: For example the php_strip_whitespace function in PHP "Returns the PHP source code in filename with PHP comments and whitespace removed". Will this help in load time?

Read the article

Apache 2.4 PHP 5.4 MySQL enabled but not found? [migrated]

- by jurchiks

Just tried setting up the latest Apache (2.4.1 x86 VC10 from apachelounge) and PHP (5.4 VC9 TS X86, with the php5apache2_4.dll) on my PC and ran into this weird problem; in my php.ini I have enabled all of the following: extension=php_mysql.dll extension=php_mysqli.dll extension=php_pdo_mysql.dll but when I try to print the available PDO's using this: print_r(PDO::getAvailableDrivers()); It gives me an empty array. PhpMyAdmin and MantisBT also refuse to work, saying that the mysql extension is missing. phpinfo() gives this: PDO PDO support enabled PDO drivers no value and when searching for mysql, only the mysqlnd section pops up... The DLLs are there in the D:/php/ext folder and no errors pop up when starting up Apache, as well as no errors in the Windows Event Log, and PHP itself has no error log anyway. What could possibly be the problem with this? Before this I had Apache 2.2.22 from apachelounge and PHP 5.3.9 and I had no problems. Now nothing works...

Read the article

Nginx - Enable PHP for all hosts

- by F21

I am currently testing out nginx and have set up some virtual hosts by putting configurations for each virtual host in its own file in a folder called sites-enabled. I then ask nginx to load all those config files using: include C:/nginx/sites-enabled/*.conf; This is my current config: http { server_names_hash_bucket_size 64; include mime.types; include C:/nginx/sites-enabled/*.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; root C:/www-root; #charset koi8-r; #access_log logs/host.access.log main; location / { index index.html index.htm index.php; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server{ server_name localhost; } } And this is one of the configs for a virtual host: server { server_name testsubdomain.testdomain.com root C:/www-root/testsubdomain.testdomain.com; } The problem is that for testsubdomain.testdomain.com, I cannot get php scripts to run unless I have defined a location block with fastcgi parameters for it. What I would like to do is to be able to enable PHP for all hosted sites on this server (without having to add a PHP location block with fastcgi parameters) for maintainability. This is so that if I need to change any fastcgi values for PHP, I can just change it in 1 location. Is this something that's possible for nginx? If so, how can this be done?

Read the article

Connecting to MySQL Server from PHP Command Line (MAMP)

- by Austin White

First of all, I'm using Mac OSX 1.6, MAMP 1.9, PHP 5.3.4, and MySQL 5.1.44. I'm in the process of setting up a video encoding service for a site using Chris Boulton's PHP-Resque and Redis. Once the worker process is fired and the videos have been encoded, I need to save their locations to a mysql database. The php script is being run from the shell, so that is where the issue begins. I import the mysql settings and when it attempts to connect, I get the following errors: Warning: mysqli::mysqli(): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): [2002] php_network_getaddresses: getaddrinfo failed: nodename nor servn (trying to connect via tcp://MYSQL_SERVER:3306) in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): (HY000/2002): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::set_charset(): Couldn't fetch MySQLi_Extended in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 32 I realize that the error is occurring because it's trying to connect to tcp://MYSQL_SERVER:3306, when MySQL is on port 8889. I've been reading about Mac OSX and MAMP errors regarding the mysql.sock and I've gone through multiple forums and tried various fixes, but none have worked. I've tried PATH=/Applications/MAMP/Library/bin/:/Applications/MAMP/bin/php5.3/bin/:/opt/local/bin:/opt/local/sbin:$PATH and sudo ln -s /Applications/MAMP/tmp/mysql/mysql.sock /tmp/mysql.sock but neither have worked. I even ran a search on my machine for "3306" to find where it's being set, but because that's the normal default, I'm guessing it's not being set explicitly. Any clues on how to fix this rather challenging error?

Search Results

Search found 33248 results on 1330 pages for 'php parser'.

Page 43/1330 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50 | Next Page >

- by jmfayard

- by david

- by David

- by sm56d

- by thecoshman

- by chifliiiii

- by Grozav Alex Ioan

- by p1

- by jackie

- by Peter D

- by Mark

- by Sarah HSL

- by Klaus Jasper

- by Mervyn

- by jon

- by Dutchie432

- by user1146440

- by Kim

- by AdityaGameProgrammer

- by Goma

- by jurchiks

- by F21

- by Austin White

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50 | Next Page >