Search Results

Search found 4761 results on 191 pages for 'series'.

Page 43/191 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • I can't get my Macbook Pro to print to an IP addressable printer

    - by Pieter
    Running Macbook Pro OS X 10.6.3 Accessing an HP OfficeJet 5610 plugged in the USB port of a US Robotics router. I tried several combinations of: Protocol: Internet Printing Protocol (IPP) Line Printer Daemon (LPD) HP JetDirect (socket) Address: http://192.168.1.10:1631/printers/HP5610 192.168.1.10:1631/printers/HP5610 http://192.168.1.10:1631 192.168.1.10:1631 192.168.1.10 ... Driver: HP OfficeJet 5600 Series Whenever I try to print, it fails while saying "connected to printer" or "Printer is busy...zill try again in X seconds" Both Windows 7 and Windows XP computers on the network can successfully access this printer, identifying it as "HP5610 on http://192.168.1.10:1631/" I tried clearing all tasks and printers (ctrl-click in the menu), and resetting it to (socket, http://192.168.1.10:1631/printers/HP5610, HP5600 series) but to no success.

    Read the article

  • T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

    - by edelwater
    Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

    Read the article

  • how to pass one variable value frm one class to the oder

    - by Arunabha
    i hav two packages one is com.firstBooks.series.db.parser which hav a java file XMLParser.java,i hav another package com.firstBooks.series79 which hav a class called AppMain.NW i want to send the value of a variable called _xmlFileName frm AppMain class to the xmlFile variable in XMLParser class,i am posting the codes for both the class,kindly help me. package com.firstBooks.series.db.parser; import java.io.IOException; import java.io.InputStream; import java.util.Vector; import net.rim.device.api.xml.parsers.DocumentBuilder; import net.rim.device.api.xml.parsers.DocumentBuilderFactory; import net.rim.device.api.xml.parsers.ParserConfigurationException; import org.w3c.dom.Document; import org.w3c.dom.Element; import org.w3c.dom.NodeList; import org.xml.sax.SAXException; import com.firstBooks.series.db.Question; public class XMLParser { private Document document; public static Vector questionList; public static String xmlFile; public XMLParser() { questionList = new Vector(); } public void parseXMl() throws SAXException, IOException, ParserConfigurationException { // Build a document based on the XML file. DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); InputStream inputStream = getClass().getResourceAsStream(xmlFile); document = builder.parse(inputStream); } public void parseDocument() { Element element = document.getDocumentElement(); NodeList nl = element.getElementsByTagName("question"); if (nl != null && nl.getLength() > 0) { for (int i = 0; i < nl.getLength(); i++) { Element ele = (Element) nl.item(i); Question question = getQuestions(ele); questionList.addElement(question); } } } private Question getQuestions(Element element) { String title = getTextValue(element, "title"); String choice1 = getTextValue(element, "choice1"); String choice2 = getTextValue(element, "choice2"); String choice3 = getTextValue(element, "choice3"); String choice4 = getTextValue(element, "choice4"); String answer = getTextValue(element, "answer"); String rationale = getTextValue(element, "rationale"); Question Questions = new Question(title, choice1, choice2, choice3, choice4, answer, rationale); return Questions; } private String getTextValue(Element ele, String tagName) { String textVal = null; NodeList nl = ele.getElementsByTagName(tagName); if (nl != null && nl.getLength() > 0) { Element el = (Element) nl.item(0); textVal = el.getFirstChild().getNodeValue(); } return textVal; } } Nw the code for AppMain class //#preprocess package com.firstBooks.series79; import net.rim.device.api.ui.UiApplication; import com.firstBooks.series.ui.screens.HomeScreen; public class AppMain extends UiApplication { public static String _xmlFileName; public static boolean _Lite; public static int _totalNumofQuestions; public static void initialize(){ //#ifndef FULL /* //#endif _xmlFileName = "/res/Series79_FULL.xml"; _totalNumofQuestions = 50; _Lite = false; //#ifndef FULL */ //#endif //#ifndef LITE /* //#endif _xmlFileName = "/res/Series79_LITE.xml"; _totalNumofQuestions = 10; _Lite = true; //#ifndef LITE */ //#endif } private AppMain() { initialize(); pushScreen(new HomeScreen()); } public static void main(String args[]) { new AppMain().enterEventDispatcher(); } }

    Read the article

  • Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

    - by DigitalGeekery
    Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs.   One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address.   Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser.   Dynamic DNS This is an optional step, but  it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email.   Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated.    On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list.   With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to  the listings at that time of the day.  Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right.   To setup a recording, click on a program.   You can choose to record the individual show or the entire series by clicking on Record Show or Record Series.   Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording.   Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting  allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting.   Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right.   Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen.   Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

    Read the article

  • SQL SERVER – 2011 – Wait Type – Day 25 of 28

    - by pinaldave
    Since the beginning of the series, I have been getting the following question again and again: “What are the changes in SQL Server 2011 – Denali with respect to Wait Types?” SQL Server 2011 – Denali is yet to be released, and making statements on the subject will be inappropriate. Denali CTP1 has been released so I suggest that all of you download the same and experiment on it. I quickly compared the wait stats of SQL Server 2008 R2 and Denali (CTP1) and found the following changes: Wait Types Exists in SQL Server 2008 R2 and Not Exists in SQL Server 2011 “Denali” SOS_RESERVEDMEMBLOCKLIST SOS_LOCALALLOCATORLIST QUERY_WAIT_ERRHDL_SERVICE QUERY_ERRHDL_SERVICE_DONE XE_PACKAGE_LOCK_BACKOFF Wait Types Exists in SQL Server 2011 and Not Exists in SQL Server 2008 SLEEP_MASTERMDREADY SOS_MEMORY_TOPLEVELBLOCKALLOCATOR SOS_PHYS_PAGE_CACHE FILESTREAM_WORKITEM_QUEUE FILESTREAM_FILE_OBJECT FILESTREAM_FCB FILESTREAM_CACHE XE_CALLBACK_LIST PWAIT_MD_RELATION_CACHE PWAIT_MD_SERVER_CACHE PWAIT_MD_LOGIN_STATS DISPATCHER_PRIORITY_QUEUE_SEMAPHORE FT_PROPERTYLIST_CACHE SECURITY_KEYRING_RWLOCK BROKER_TRANSMISSION_WORK BROKER_TRANSMISSION_OBJECT BROKER_TRANSMISSION_TABLE BROKER_DISPATCHER BROKER_FORWARDER UCS_MANAGER UCS_TRANSPORT UCS_MEMORY_NOTIFICATION UCS_ENDPOINT_CHANGE UCS_TRANSPORT_STREAM_CHANGE QUERY_TASK_ENQUEUE_MUTEX DBCC_SCALE_OUT_EXPR_CACHE PWAIT_ALL_COMPONENTS_INITIALIZED PREEMPTIVE_SP_SERVER_DIAGNOSTICS SP_SERVER_DIAGNOSTICS_SLEEP SP_SERVER_DIAGNOSTICS_INIT_MUTEX AM_INDBUILD_ALLOCATION QRY_PARALLEL_THREAD_MUTEX FT_MASTER_MERGE_COORDINATOR PWAIT_RESOURCE_SEMAPHORE_FT_PARALLEL_QUERY_SYNC REDO_THREAD_PENDING_WORK REDO_THREAD_SYNC COUNTRECOVERYMGR HADR_DB_COMMAND HADR_TRANSPORT_SESSION HADR_CLUSAPI_CALL PWAIT_HADR_CHANGE_NOTIFIER_TERMINATION_SYNC PWAIT_HADR_ACTION_COMPLETED PWAIT_HADR_OFFLINE_COMPLETED PWAIT_HADR_ONLINE_COMPLETED PWAIT_HADR_FORCEFAILOVER_COMPLETED PWAIT_HADR_WORKITEM_COMPLETED HADR_WORK_POOL HADR_WORK_QUEUE HADR_LOGCAPTURE_SYNC LOGPOOL_CACHESIZE LOGPOOL_FREEPOOLS LOGPOOL_REPLACEMENTSET LOGPOOL_CONSUMERSET LOGPOOL_MGRSET LOGPOOL_CONSUMER LOGPOOLREFCOUNTEDOBJECT_REFDONE HADR_SYNC_COMMIT HADR_AG_MUTEX PWAIT_SECURITY_CACHE_INVALIDATION PWAIT_HADR_SERVER_READY_CONNECTIONS HADR_FILESTREAM_MANAGER HADR_FILESTREAM_BLOCK_FLUSH HADR_FILESTREAM_IOMGR XDES_HISTORY XDES_SNAPSHOT HADR_FILESTREAM_IOMGR_IOCOMPLETION UCS_SESSION_REGISTRATION ENABLE_EMPTY_VERSIONING HADR_DB_OP_START_SYNC HADR_DB_OP_COMPLETION_SYNC HADR_LOGPROGRESS_SYNC HADR_TRANSPORT_DBRLIST HADR_FAILOVER_PARTNER XDESTSVERMGR GHOSTCLEANUPSYNCMGR HADR_AR_UNLOAD_COMPLETED HADR_PARTNER_SYNC HADR_DBSTATECHANGE_SYNC We already know that Wait Types and Wait Stats are going to be the next big thing in the next version of SQL Server. So now I am eagerly waiting to dig deeper in the wait stats. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • Web Matrix released

    - by TATWORTH
    Microsoft have now released Web Matrix (and ASP.NET MVC3 if you so inclined!) One signifcant utility is IIS Express which will replace Cassini It is worth noting that SP1 for VS2010 should be out in Q1. Links: http://www.hanselman.com/blog/ASPNETMVC3WebMatrixNuGetIISExpressAndOrchardReleasedTheMicrosoftJanuaryWebReleaseInContext.aspx http://www.hanselman.com/blog/LinkRollupNewDocumentationAndTutorialsFromWebPlatformAndTools.aspx http://arstechnica.com/microsoft/news/2011/01/microsoft-releases-free-webmatrix-web-development-tool.ars I am impressed by the copious tutorials on MVC, which I include below: Intro to ASP.NET MVC 3 onboarding series. Scott Hanselman and Rick Anderson collaboration and Mike Pope (Editor) Both C# and VB versions: Intro to ASP.NET MVC 3 Adding a Controller Adding a View Entity Framework Code-First Development Accessing your Model's Data from a Controller Adding a Create Method and Create View Adding Validation to the Model Adding a New Field to the Movie Model and Table Implementing Edit, Details and Delete Source code for this series MVC 3 Updated and new tutorials/ API Reference on MSDN Rick Anderson (Lead Programming Writer), Keith Newman and Mike Pope (Editor) ASP.NET MVC 3 Content Map ASP.NET MVC Overview MVC Framework and Application Structure Understanding MVC Application Execution Compatibility of ASP.NET Web Forms and MVC Walkthrough: Creating a Basic ASP.NET MVC Project Walkthrough: Using Forms Authentication in ASP.NET MVC Controllers and Action Methods in ASP.NET MVC Applications Using an Asynchronous Controller in ASP.NET MVC Views and UI Rendering in ASP.NET MVC Applications Rendering a Form Using HTML Helpers Passing Data in an ASP.NET MVC Application Walkthrough: Using Templated Helpers to Display Data in ASP.NET MVC Creating an ASP.NET MVC View by Calling Multiple Actions Models and Validation in ASP.NET MVC How to: Validate Model Data Using DataAnnotations Attributes Walkthrough: Using MVC View Templates How to: Implement Remote Validation in ASP.NET MVC Walkthrough: Adding AJAX Scripting Walkthrough: Organizing an Application using Areas Filtering in ASP.NET MVC Creating Custom Action Filters How to: Create a Custom Action Filter Unit Testing in ASP.NET MVC Applications Walkthrough: Using TDD with ASP.NET MVC How to: Add a Custom ASP.NET MVC Test Framework in Visual Studio ASP.NET MVC 3 Reference System.Web.Mvc System.Web.Mvc.Ajax System.Web.Mvc.Async System.Web.Mvc.Html System.Web.Mvc.Razor

    Read the article

  • SQL SERVER – A Successful Performance Tuning Seminar – Hyderabad – Nov 27-28, 2010 – Next Pune

    - by pinaldave
    My recent SQL Server Performance Tuning Seminar in Colombo was oversubscribed with total of 35 attendees. You can read the details over here SQLAuthority News – SQL Server Performance Optimizations Seminar – Grand Success – Colombo, Sri Lanka – Oct 4 – 5, 2010. I had recently completed another seminar in Hyderabad which was again blazing success. We had 25 attendees to the seminar and had wonderful time together. There is one thing very different between usual class room training and this seminar series. In this seminar series we go 100% demo oriented and real world scenario deep down. We do not talk usual theory talk-talk. The goal of this seminar to give anybody who attends a jump start and deep dive on the performance tuning subject. I will share many different examples and scenarios from my years of experience of performance tuning. The beginning of the second day is always interesting as I take attendees the server as example of the talk, and together we will attempt to identify the bottleneck and see if we can resolve the same. So far I have got excellent feedback on this unique session, where we pick database of the attendees and address the issues. I plan to do the same again in next sessions. The next Seminar is in Pune.I am very excited for the same. Date and Time: December 4-5, 2010. 10 AM to 6 PM The Pride Hotel 05, University Road, Shivaji Nagar, Pune – 411 005 Tel: 020 255 34567 Click here for the agenda of the seminar. Instead of writing more details, I will let the photos do the talk for latest Hyderabad Seminar. Hotel Amrutha Castle King Arthur's Court Pinal Presenting Seminar Pinal Presenting Seminar Seminar Attendees Pinal Presenting Seminar Group Photo of Hyderabad Seminar Attendees Seminar Support Staff - Nupur and Shaivi Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

    Read the article

  • The How-To Geek Holiday Gift Guide (Geeky Stuff We Like)

    - by The Geek
    Welcome to the very first How-To Geek Holiday Gift Guide, where we’ve put together a list of our absolute favorites to help you weed through all of the junk out there to pick the perfect gift for anybody. Though really, it’s just a list of the geeky stuff we want. We’ve got a whole range of items on the list, from cheaper gifts that most anybody can afford, to the really expensive stuff that we’re pretty sure nobody is giving us. Stocking Stuffers Here’s a couple of ideas for items that won’t break the bank. LED Keychain Micro-Light   Magcraft 1/8-Inch Rare Earth Cube Magnets Best little LED keychain light around. If they don’t need the penknife of the above item this is the perfect gift. I give them out by the handfuls and nobody ever says anything but good things about them. I’ve got ones that are years old and still running on the same battery.  Price: $8   Geeks cannot resist magnets. Jason bought this pack for his fridge because he was sick of big clunky magnets… these things are amazing. One tiny magnet, smaller than an Altoid mint, can practically hold a clipboard right to the fridge. Amazing. I spend more time playing with them on the counter than I do actually hanging stuff.  Price: $10 Lots of Geeky Mugs   Astronomy Powerful Green Laser Pointer There’s loads of fun, geeky mugs you can find on Amazon or anywhere else—and they are great choices for the geek who loves their coffee. You can get the Caffeine mug pictured here, or go with an Atari one, Canon Lens, or the Aperture mug based on Portal. Your choice. Price: $7   No, it’s not a light saber, but it’s nearly bright enough to be one—you can illuminate low flying clouds at night or just blind some aliens on your day off. All that for an extremely low price. Loads of fun. Price: $15       Geeky TV Shows and Books Sometimes you just want to relax and enjoy a some TV or a good book. Here’s a few choices. The IT Crowd Fourth Season   Doctor Who, Complete Fifth Series Ridiculous, funny show about nerds in the IT department, loved by almost all the geeks here at HTG. Justin even makes this required watching for new hires in his office so they’ll get his jokes. You can pre-order the fourth season, or pick up seasons one, two, or three for even cheaper. Price: $13   It doesn’t get any more nerdy than Eric’s pick, the fifth all-new series of Doctor Who, where the Daleks are hatching a new master plan from the heart of war-torn London. There’s also alien vampires, humanoid reptiles, and a lot more. Price: $52 Battlestar Galactica Complete Series   MAKE: Electronics: Learning Through Discovery Watch the epic fight to save the human race by finding the fabled planet Earth while being hunted by the robotic Cylons. You can grab the entire series on DVD or Blu-ray, or get the seasons individually. This isn’t your average sci-fi TV show. Price: $150 for Blu-ray.   Want to learn the fundamentals of electronics in a fun, hands-on way? The Make:Electronics book helps you build the circuits and learn how it all works—as if you had any more time between all that registry hacking and loading software on your new PC. Price: $21       Geeky Gadgets for the Gadget-Loving Geek Here’s a few of the items on our gadget list, though lets be honest: geeks are going to love almost any gadget, especially shiny new ones. Klipsch Image S4i Premium Noise-Isolating Headset with 3-Button Apple Control   GP2X Caanoo MAME/Console Emulator If you’re a real music geek looking for some serious quality in the headset for your iPhone or iPod, this is the pair that Alex recommends. They aren’t terribly cheap, but you can get the less expensive S3 earphones instead if you prefer. Price: $50-100   Eric says: “As an owner of an older version, I can say the GP2X is one of my favorite gadgets ever. Touted a “Retro Emulation Juggernaut,” GP2X runs Linux and may be the only open source software console available. Sounds too good to be true, but isn’t.” Price: $150 Roku XDS Streaming Player 1080p   Western Digital WD TV Live Plus HD Media Player If you do a lot of streaming over Netflix, Hulu Plus, Amazon’s Video on Demand, Pandora, and others, the Roku box is a great choice to get your content on your TV without paying a lot of money.  It’s also got Wireless-N built in, and it supports full 1080P HD. Price: $99   If you’ve got a home media collection sitting on a hard drive or a network server, the Western Digital box is probably the cheapest way to get that content on your TV, and it even supports Netflix streaming too. It’ll play loads of formats in full HD quality. Price: $99 Fujitsu ScanSnap S300 Color Mobile Scanner   Doxie, the amazing scanner for documents Trevor said: “This wonderful little scanner has become absolutely essential to me. My desk used to just be a gigantic pile of papers that I didn’t need at the moment, but couldn’t throw away ‘just in case.’ Now, every few weeks, I’ll run that paper pile through this and then happily shred the originals!” Price: $300   If you don’t scan quite as often and are looking for a budget scanner you can throw into your bag, or toss into a drawer in your desk, the Doxie scanner is a great alternative that I’ve been using for a while. It’s half the price, and while it’s not as full-featured as the Fujitsu, it might be a better choice for the very casual user. Price: $150       (Expensive) Gadgets Almost Anybody Will Love If you’re not sure that one of the more geeky presents is gonna work, here’s some gadgets that just about anybody is going to love, especially if they don’t have one already. Of course, some of these are a bit on the expensive side—but it’s a wish list, right? Amazon Kindle       The Kindle weighs less than a paperback book, the screen is amazing and easy on the eyes, and get ready for the kicker: the battery lasts at least a month. We aren’t kidding, either—it really lasts that long. If you don’t feel like spending money for books, you can use it to read PDFs, and if you want to get really geeky, you can hack it for custom screensavers. Price: $139 iPod Touch or iPad       You can’t go wrong with either of these presents—the iPod Touch can do almost everything the iPhone can do, including games, apps, and music, and it has the same Retina display as the iPhone, HD video recording, and a front-facing camera so you can use FaceTime. Price: $229+, depending on model. The iPad is a great tablet for playing games, browsing the web, or just using on your coffee table for guests. It’s well worth buying one—but if you’re buying for yourself, keep in mind that the iPad 2 is probably coming out in 3 months. Price: $500+ MacBook Air  The MacBook Air comes in 11” or 13” versions, and it’s an amazing little machine. It’s lightweight, the battery lasts nearly forever, and it resumes from sleep almost instantly. Since it uses an SSD drive instead of a hard drive, you’re barely going to notice any speed problems for general use. So if you’ve got a lot of money to blow, this is a killer gift. Price: $999 and up. Stuck with No Idea for a Present? Gift Cards! Yeah, you’re not going to win any “thoughtful present” awards with these, but you might just give somebody what they really want—the new Angry Birds HD for their iPad, Cut the Rope, or anything else they want. ITunes Gift Card   Amazon.com Gift Card Somebody in your circle getting a new iPod, iPhone, or iPad? You can get them an iTunes gift card, which they can use to buy music, games or apps. Yep, this way you can gift them a copy of Angry Birds if they don’t already have it. Or even Cut the Rope.   No clue what to get somebody on your list? Amazon gift cards let them buy pretty much anything they want, from organic weirdberries to big screen TVs. Yeah, it’s not as thoughtful as getting them a nice present, but look at the bright side: maybe they’ll get you an Amazon gift card and it’ll balance out. That’s the highlights from our lists—got anything else to add? Share your geeky gift ideas in the comments. Latest Features How-To Geek ETC The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography Happy Snow Bears Theme for Chrome and Iron [Holiday] Download Full Command and Conquer: Tiberian Sun Game for Free Scorched Cometary Planet Wallpaper Quick Fix: Add the RSS Button Back to the Firefox Awesome Bar Dropbox Desktop Client 1.0.0 RC for Windows, Linux, and Mac Released Hang in There Scrat! – Ice Age Wallpaper

    Read the article

  • ATG Live Webcast Event - EBS 12 OAF Rich UI Enhancements

    - by Bill Sawyer
    The E-Business Suite Applications Technology Group (ATG) participates in several conferences a year, including Oracle OpenWorld in San Francisco and OAUG/Collaborate.   We announce new releases, roadmaps, updates, and other news at these events.  These events are exciting, drawing thousands of attendees, but it's clear that only a fraction of our EBS users are able to participate. We touch upon many of the same announcements here on this blog, but a blog article is necessarily different than an hour-long conference session.  We're very interested in offering more in-depth technical content and the chance to interact directly with senior ATG Development staff.  New ATG Live Webcast series -- free of charge As part of that initiative, I'm very pleased to announce that we're launching a new series of free ATG Live Webcasts jointly with Oracle University.  Our goal is to provide solid, authoritative coverage of some of the latest ATG technologies, broadcasting live from our development labs to you. Our first event is titled: The Latest E-Business Suite R12.x OA Framework Rich User Interface Enhancements This live one-hour webcast will offer a comprehensive review of the latest user interface enhancements and updates to OA Framework in EBS 12. Developers will get a detailed look at new features designed to enhance usability, offer more capabilities for personalization and extensions, and support the development and use of dashboards and web services. Topics will include new rich user interface (UI) capabilities such as: 

    Read the article

  • Oracle UCM Integration with WebCenter

    - by john.brunswick
    Portal deployments always contain some level of content that requires management. Like peanut butter and jelly, the ying and yang, they are inseparable. Unfortunately, unlike peanut butter and jelly content and portals usually require that an extensive amount of work be completed to create a seamless experience for end users who will be serviced by the portal, as well as for users who will be contributing and managing the content. With WebCenter Suite Oracle has understood this need and addressed it by including Universal Content Management (UCM, formerly Stellent) licensing to allow content to be delivered into the portal from a mature, class-leading content management technology. To unlock the most value from this content technology, WebCenter portal technology can leverage a series of integration strategies available through its open standards support, as well as a series of native components to enable content consumption from UCM. This have been done to enable IT teams to reduce solution deployment time and provide quick wins to their business stakeholders. The ongoing cost of ownership for the solution is also greatly reduced through these various integrations. Within this post we will explore various ways in which the content can be Contributed through out of the box interfaces Displayed natively within the portal (configuration) Exposed programmatically (development) The information below showcases how to quickly take advantage of WebCenter's marriage of content and portal technologies, then leverage various programmatic integrations available with UCM.

    Read the article

  • SQL SERVER – Index Created on View not Used Often – Limitation of the View 12

    - by pinaldave
    I have previously written on the subject SQL SERVER – The Limitations of the Views – Eleven and more…. This was indeed a very popular series and I had received lots of feedback on that topic. Today we are going to discuss something very interesting as well. During my recent performance tuning seminar in Hyderabad, I presented on the subject of Views. During the seminar, one of the attendees asked a question: We create a table and create a View on the top of it. On the same view, if we create Index, when querying View, will that index be used? The answer is NOT Always! (There is only one specific condition when it will be used. We will write about that later in the next post). Let us see the test case for the same. In our script we will do following: USE tempdb GO IF EXISTS (SELECT * FROM sys.views WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[SampleView]')) DROP VIEW [dbo].[SampleView] GO IF EXISTS (SELECT * FROM sys.objects WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[mySampleTable]') AND TYPE IN (N'U')) DROP TABLE [dbo].[mySampleTable] GO -- Create SampleTable CREATE TABLE mySampleTable (ID1 INT, ID2 INT, SomeData VARCHAR(100)) INSERT INTO mySampleTable (ID1,ID2,SomeData) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY o1.name), ROW_NUMBER() OVER (ORDER BY o2.name), o2.name FROM sys.all_objects o1 CROSS JOIN sys.all_objects o2 GO -- Create View CREATE VIEW SampleView WITH SCHEMABINDING AS SELECT ID1,ID2,SomeData FROM dbo.mySampleTable GO -- Create Index on View CREATE UNIQUE CLUSTERED INDEX [IX_ViewSample] ON [dbo].[SampleView] ( ID2 ASC ) GO -- Select from view SELECT ID1,ID2,SomeData FROM SampleView GO Let us check the execution plan for the last SELECT statement. You can see from the execution plan. That even though we are querying View and the View has index, it is not really using that index. In the next post, we will see the significance of this View and where it can be helpful. Meanwhile, I encourage you to read my View series: SQL SERVER – The Limitations of the Views – Eleven and more…. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Training, SQL View, T SQL, Technology

    Read the article

  • How to Reuse Your Old Wi-Fi Router as a Network Switch

    - by Jason Fitzpatrick
    Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

    Read the article

  • Using Microsoft's Chart Controls In An ASP.NET Application: Serializing Chart Data

    In most usage scenarios, the data displayed in a Microsoft Chart control comes from some dynamic source, such as from a database query. The appearance of the chart can be modified dynamically, as well; past installments in this article series showed how to programmatically customize the axes, labels, and other appearance-related settings. However, it is possible to statically define the chart's data and appearance strictly through the control's declarative markup. One of the demos examined in the Getting Started article rendered a column chart with seven columns whose labels and values were defined statically in the <asp:Series> tag's <Points> collection. Given this functionality, it should come as no surprise that the Microsoft Chart Controls also support serialization. Serialization is the process of persisting the state of a control or an object to some other medium, such as to disk. Deserialization is the inverse process, and involves taking the persisted data and recreating the control or object. With just a few lines of code you can persist the appearance settings, the data, or both to a file on disk or to any stream. Likewise, it takes just a few lines of codes to reconstitute a chart from the persisted information. This article shows how to use the Microsoft Chart Control's serialization functionality by examining a demo application that allows users to create custom charts, specifying the data to plot and some appearance-related settings. The user can then save a "snapshot" of this chart, which persists its appearance and data to a record in a database. From another page, users can view these saved chart snapshots. Read on to learn more! Read More >

    Read the article

  • Free Video Training: ASP.NET MVC 3 Features

    - by ScottGu
    A few weeks ago I blogged about a great ASP.NET MVC 3 video training course from Pluralsight that was made available for free for 48 hours for people to watch.  The feedback from the people that had a chance to watch it was really fantastic.  We also received feedback from people who really wanted to watch it – but unfortunately weren’t able to within the 48 hour window. The good news is that we’ve worked with Pluralsight to make the course available for free again until March 18th.  You can watch any of the course modules for free, through March 18th, on the www.asp.net/mvc website here: The 6 videos in this course are a total of 3 hours and 17 minutes long, and provide a nice overview of the new features introduced with ASP.NET MVC 3 including: Razor, Unobtrusive JavaScript, Richer Validation, ViewBag, Output Caching, Global Action Filters, NuGet, Dependency Injection, and much more.  Scott Allen is the presenter, and the format, video player, and cadence of the course is really excellent. It provides a great way to quickly come up to speed with all of the new features introduced with the new ASP.NET MVC 3 release. Introductory ASP.NET MVC 3 course also coming soon The above course provides a good way for people already familiar with ASP.NET MVC to quickly learn the new features in the V3 release. Pluralsight is also working on a new introductory ASP.NET MVC 3 course series designed for developers who are brand new to ASP.NET MVC, and who want an end to end training curriculum on how to come up to speed with it.  It will cover all of the basics of ASP.NET MVC (including the new Razor view engine), how to use EF code first for data access, using JavaScript/AJAX with MVC, security scenarios with MVC, unit testing applications, deploying applications, and more. I’m excited to pre-announce that we’ll also make this new introductory series free on the www.asp.net/mvc web-site for anyone to watch. I’ll do another blog post linking to it once it is live and available. Hope this helps, Scott

    Read the article

  • Join our webcast: Discover What’s New in Oracle Data Integrator and Oracle GoldenGate

    - by Irem Radzik
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} Data integration team has organized a series of webcasts for this summer. We are kicking it off this Thursday June 30th at 10am PT with a product update webcast: Discover What’s New in Oracle Data Integrator and Oracle GoldenGate. In this webcast you will hear from product management about the new patch updates to both GoldenGate 11g R1 and ODI 11gR1. Jeff Pollock, Sr. Director of Product Management for ODI will talk about the new features in Oracle Data Integrator 11.1.1.5, including the data lineage integration with OBI EE, enhanced web services to support flexible architectures as well as capabilities for efficient object execution such as Load Plans. Jeff will discuss support for complex files and performance enhancements. Chris McAllister, Sr. Director of Product Management for Oracle GoldenGate will cover the new features of Oracle GoldenGate 11.1.1.1 such as increased data security by supporting Oracle Database Advanced Security option, deeper integration with Oracle Database, and the expanded list of heterogeneous databases GoldenGate supports . Chris will also talk about the new Oracle GoldenGate 11gR1 release for HP NonStop platform and will provide information on our strategic direction for product development. Join us this Thursday at 10am PT/ 1pm ET to hear directly from Data Integration Product Management . You can register here for the June 30th webcast as well as for the upcoming ones in our summer webcast series.

    Read the article

  • Implementing a wrapping wire (like the Worms Ninja Rope) in a 2D physics engine

    - by Andrew Russell
    I've been trying out some rope-physics recently, and I've found that the "standard" solution - making a rope from a series of objects strung together with springs or joints - is unsatisfying. Especially when rope swinging is relevant to gameplay. I don't really care about a rope's ability to wrap up or sag (this can be faked for visuals anyway). For gameplay, what is important is the ability for the rope to wrap around the environment and then subsequently unwrap. It doesn't even have to behave like rope - a "wire" made up of straight line segments would do. Here's an illustration: This is very similar to the "Ninja Rope" from the game Worms. Because I'm using a 2D physics engine - my environment is made up of 2D convex polygons. (Specifically I am using SAT in Farseer.) So my question is this: How would you implement the "wrapping" effect? It seems pretty obvious that the wire will be made up of a series of line segments that "split" and "join". And the final (active) segment of that line, where the moving object attaches, will be a fixed-length joint. But what is the maths / algorithm involved for determining when and where the active line segment needs to be split? And when it needs to be joined with the previous segment? (Previously this question also asked about doing this for a dynamic environment - I've decided to split that off into other questions.)

    Read the article

  • Different Means Better with the new Windows Phone Developer Experience

    - by Nikita Polyakov
    If you are interested in the building mobile applications or have been in the past you might want to check out this blog post: Charlie Kindel - Different Means Better with the new Windows Phone Developer Experience What does this mean? Let me take some out takes and highlight them for you. It won’t come as a surprise to many to learn that the Windows Phone 7 developer experience builds upon the following GIANTS (among others): .NET Silverlight XNA platform Microsoft’s developer tools Web 2.0 standards and To enable the fantastic user experiences you’ve seen in the Windows Phone 7 Series demos so far we’ve had to break from the past. To deliver what developers expect in the developer platform we’ve had to change how phone apps were written. One result of this is previous Windows mobile applications will not run on Windows Phone 7 Series. To be clear, we will continue to work with our partners to deliver new devices based on Windows Mobile 6.5 and will support those products for many years to come, so it’s not as though one line ends as soon as the other begins. Once again, more details at MIX10. Start watching the @WP7Dev twitter account for more info.

    Read the article

  • New Technical Articles on SOA, Mobile, IDM, WebLogic, Coherence

    - by OTN ArchBeat
    For your reading pleasure... In October the following items of techie goodness from members of the architect community were added to the ever-growing library of OTN technical articles. SOA in Real Life: Mobile Solutions by Jürgen Kress, Berthold Maier, Hajo Normann, Danilo Schmeidel, Guido Schmutz, Bernd Trops, Clemens Utschig-Utschig, Torsten Winterberg Consumers are no longer content to be chained to a desktop or laptop computer. This article, teh ninth chapter in the Industrial SOA series, describes ways companies can take SOA to go. [More SOA Articles] SOA and User Interfaces by Juergen Kress, Hajo Normann, Danilo Schmiedel, Guido Schmutz, Clemens Utschig-Utschig, Torsten Winterberg, and Bernd Trops The eighth chapter in the Industrial SOA series addresses the challenges of developing user interfaces in a service oriented architecture, and describes a practical application of Thomas Erl's UI Mediator pattern.[More SOA Articles] Enterprise Grade Deployment Considerations for Oracle Identity Manager AD Connector by Firdaus Fraz Oracle Fusion Middleware solution architect Firdaus Fraz illustrates provides best practice recommendations for setting up an enterprise deployment environment for the OIM connector for Microsoft Active Directory. [More Identity Management Articles] Coherence*Web: Sharing an httpSession Among Applications in Different Oracle WebLogic Clusters by Jordi Villena SOA solution architect Jordi Villena shows how easy it is to extend Coherence*Web to enable session sharing. [More SOA Articles] Multi-Factor Authentication in Oracle WebLogic by Shailesh K. Mishra Using multi-factor authentication to protect web applications deployed on Oracle WebLogic.[More Identity Management Articles] You'll find many more articles on many more topics here.

    Read the article

  • Why’s (Poignant) Guide to Ruby

    - by Ben Griswold
    You’re familiar with O’Reilly’s brilliant Head First Series, right?  Great.  Then you know how every book begins with an explanation of the Head First teaching style and you know the teaching format which Kathy Sierra and Bert Bates developed is based on research in cognitive science, neurobiology and educational psychology and it’s all about making learning visual and conversational and attractive and emotional and it’s highly effective.  Anyway, it’s a great series and you should read every last one of the books. Moving on… I’ve been wanting to learn more about Ruby and Why’s (Poignant) Guide to Ruby has been on my reading list for a while and there was talk about cartoon foxes and other silliness and I figured Why’s (Poignant) Guide to Ruby probably takes the same unorthodox teaching style as the Head First books – and that’s great – so I read the book, in piecemeal, over the last couple of weeks and, well, I figured wrong. Now having read the book, here’s my take on Why’s (Poignant) Guide – it’s very creative and clever and it does a darn good job of introducing one to Ruby.  If you’re interested in Ruby or simply interested, the online book is worth your time.  If you’re thinking (like me) that cartoon foxes will be doing the teaching, that’s simple not the case.  However, the cartoons and the random stories in the sidebar may serve a purpose. Unlike the Head First books where images and captions are used to further explain the teachings, the cartoons and stories in Why’s Guide serve as intermission and offer your brain a brief moment of rest before the next Ruby concept is explained.  It’s not a bad strategy, but definitely not as effective as the Head First techniques.  

    Read the article

  • The Internet of Things & Commerce: Part 2 -- Interview with Brian Celenza, Commerce Innovation Strategist

    - by Katrina Gosek, Director | Commerce Product Strategy-Oracle
    Internet of Things & Commerce Series: Part 2 (of 3) Welcome back to the second installation of my three part series on the Internet of Things & Commerce. A few weeks ago, I wrote “The Next 7,000 Days” about how we’ve become embedded in a digital architecture in the last 7,000 days since the birth of the internet – an architecture that everyday ties the massive expanse of the internet evermore closely with our physical lives. This blog series explores how this new blend of virtual and material will change how we shop and how businesses sell. Now enjoy reading my interview with Brian Celenza, one of the chief strategists in our Oracle Commerce innovation group. He comments on the past, present, and future of the how the growing Internet of Things relates and will relate to the buying and selling of goods on and offline. -------------------------------------------- QUESTION: You probably have one of the coolest jobs on our team, Brian – and frankly, one of the coolest jobs in our industry. As part of the innovation team for Oracle Commerce, you’re regularly working on bold features and groundbreaking commerce-focused experiences for our vision demos. As you look back over the past couple of years, what is the biggest trend (or trends) you’ve seen in digital commerce that started to bring us closer to this idea of what people are calling an “Internet of Things”? Brian: Well as you look back over the last couple of years, the speed at which change in our industry has moved looks like one of those blurred movement photos – you know the ones where the landscape blurs because the observer is moving so quickly your eye focus can’t keep up. But one thing that is absolutely clear is that the biggest catalyst for that speed of change – especially over the last three years – has been mobile. Mobile technology changed everything. Over the last three years the entire thought process of how to sell on (and offline) has shifted because of mobile technology advances. Particularly for eCommerce professionals who have started to move past the notion of “channels” for selling goods to this notion of “Mobile First”… then the Web site. Or more accurately, that everything – smartphones, web, store, tablet – is just one channel or has to act like one singular access point to the same product catalog, information and content. The most innovative eCommerce professionals realized some time ago that it’s not ideal to build an eCommerce Web site and then build everything on top of or off of it. Rather, they want to build an eCommerce API and then integrate it will all other systems. To accomplish this, they are leveraging all the latest mobile technologies or possibilities mobile technology has opened up: 4G and LTE, GPS, bluetooth, touch screens, apps, html5… How has this all started to come together for shopping experiences on and offline? Well to give you a personal example, I remember visiting an Apple store a few years ago and being amazed that I didn’t have to wait in line because a store associate knew everything about me from my ID – right there on the sales floor – and could check me out anywhere. Then just a few months later (when like any good addict) I went back to get the latest and greatest new gadget, I felt like I was stealing it because I could check myself out with my smartphone. I didn’t even need to see a sales associate OR go to a cash register. Amazing. And since then, all sort sorts of companies across all different types of industries – from food service to apparel –  are starting to see mobile payments in the billions of dollars now thanks not only to the convenience factor but to smart loyalty rewards programs as well. These are just some really simple current examples that come to mind. So many different things have happened in the last couple of years, it’s hard to really absorb all of the quickly – because as soon as you do, everything changes again! Just like that blurry speed photo image. For eCommerce, however, this type of new environment underscores the importance of building an eCommerce API – a platform that has services you can tap in to and build on as the landscape changes at a fever pitch. It’s a mobile first perspective. A web service perspective – particularly if you are thinking of how to engage customers across digital and physical spaces. —— QUESTION: Thanks for bringing us into the present – some really great examples you gave there to put things into perspective. So what do you see as the biggest trend right now around the “Internet of Things” – and what’s coming next few years? Brian: Honestly, even sitting where I am in the innovation group – it’s hard to look out even 12 months because, well, I don’t even think we’ve fully caught up with what is possible now. But I can definitely say that in the last 12 months and in the coming 12 months, in the technology and eCommerce world it’s all about iBeacons. iBeacons are awesome tools we have right now to tie together physical and digital shopping experiences. They know exactly where you are as a shopper and can communicate that to businesses. Currently there seem to be two camps of thought around iBeacons. First, many people are thinking of them like an “indoor GPS”, which to be fair they literally are. The use case this first camp envisions for iBeacons is primarily for advertising and marketing. So they use iBeacons to push location-based promotions to customers if they are close to a store or in a store. You may have seen these types of mobile promotions start to pop up occasionally on your smart phone as you pass by a store you’ve bought from in the past. That’s the work of iBeacons. But in my humble opinion, these promotions probably come too early in the customer journey and although they may be well timed and work to “convert” in some cases, I imagine in most they are just eroding customer trust because they are kind of a “one-size-fits-all” solution rather than one that is taking into account what exactly the customer might be looking for in that particular moment. Maybe they just want more information and a promotion is way too soon for that type of customer. The second camp is more in line with where my thinking falls. In this case, businesses take a more sensitive approach with iBeacons to customers’ needs. Instead of throwing out a “one-size-fits-all” to any passer by with iBeacons, the use case is more around looking at the physical proximity of a customer as an opportunity to provide a service: show expert reviews on a product they may be looking at in a particular aisle of a store, offer the opportunity to compare prices (and then offer a promotion), signal an in-store associate if a customer has been in the store for more than 10 minutes in one place. These are all less intrusive more value-driven uses of iBeacons. And they are more about building customer trust through service. To take this example a bit further into the future realm of “Big Data” and “Internet of Things” businesses could actually use the Oracle Commerce Platform and iBeacons to “silently” track customer movement w/in the store to provide higher quality service. And this doesn’t have to be creepy or intrusive. Simply if a customer has been in a particular department or aisle for more than a 5 or 10 minutes, an in-store associate could come over an offer some assistance already knowing customer preferences from their online profile and maybe even seeing the items in a shopping cart they started at home. None of this has to be revealed to the customer, but it certainly could boost the level of service an in-store sales associate could provide. Or, in another futuristic example, stores could use the digital footprint of the physical store transmitted by iBeacons to generate heat maps of the store that could be tracked over time. Imagine how much you could find out about which parts of the store are more busy during certain parts of the day or seasons. This could completely revolutionize how physical merchandising is deployed or where certain high value / new items are placed. And / or this use of iBeacons could also help businesses figure out if customers are getting held up in certain parts of the store during busy days like Black Friday. If long lines are causing customers to bounce from a physical store and leave those holiday gifts behind, maybe having employees with mobile check as an option could remove the cash register bottleneck. But going to back to my original statement, it’s all still very early in the story for iBeacons. The hardware manufacturers are still very new and there is still not one clear standard.  Honestly, it all goes back to building and maintaining an extensible and flexible platform for anywhere engagement. What you’re building today should allow you to rapidly take advantage of whatever unimaginable use cases wait around the corner. ------------------------------------------------------ I hope you enjoyed the brief interview with Brian. It’s really awesome to have such smart and innovation-minded individuals on our Oracle Commerce innovation team. Please join me again in a few weeks for Part 3 of this series where I interview one of the product managers on our team about how the blending of digital and in-store selling in influencing our product development and vision.

    Read the article

  • Using Microsoft's Chart Controls In An ASP.NET Application: Serializing Chart Data

    In most usage scenarios, the data displayed in a Microsoft Chart control comes from some dynamic source, such as from a database query. The appearance of the chart can be modified dynamically, as well; past installments in this article series showed how to programmatically customize the axes, labels, and other appearance-related settings. However, it is possible to statically define the chart's data and appearance strictly through the control's declarative markup. One of the demos examined in the Getting Started article rendered a column chart with seven columns whose labels and values were defined statically in the <asp:Series> tag's <Points> collection. Given this functionality, it should come as no surprise that the Microsoft Chart Controls also support serialization. Serialization is the process of persisting the state of a control or an object to some other medium, such as to disk. Deserialization is the inverse process, and involves taking the persisted data and recreating the control or object. With just a few lines of code you can persist the appearance settings, the data, or both to a file on disk or to any stream. Likewise, it takes just a few lines of codes to reconstitute a chart from the persisted information. This article shows how to use the Microsoft Chart Control's serialization functionality by examining a demo application that allows users to create custom charts, specifying the data to plot and some appearance-related settings. The user can then save a "snapshot" of this chart, which persists its appearance and data to a record in a database. From another page, users can view these saved chart snapshots. Read on to learn more! Read More >

    Read the article

  • Silverlight Cream for April 06, 2010 -- #832

    - by Dave Campbell
    In this Issue: Alex van Beek, Gill Cleeren, SilverlightShow, Michael Sync, Rénald Nollet, Charles Petzold, The-Oliver, and Max Paulousky. Shoutouts: Denislav Savkov of SilverlightShow ported his Slider control to WP7: Windows Phone 7 Series Sample Image Viewer SilverlightShow interview: The Silverlight Tour - what, where and why. Interview with one of the Tour organizers Laurent Duveau From SilverlightCream.com: Silverlight 4: using the VisualStateManager for state animations with MVVM Alex van Beek has an approach to resolving the MVVM issue of Animations without keeping a reference to the ViewModel by way of VisualStateManager Leveraging the ASP.NET Membership in Silverlight Gill Cleeren's post at SilverlightShow talks about using ASP.NET authentication inside your Silverlight making membership not only something you know and understand, but now the transition from your ASP.NET apps to Silverlight is simple as well. Windows Phone 7 Series RSS reader SilverlightShow has a demo RSS Reader for WP7 up... no text, but the code is there. Step by Step Tutorial : Installing Multi-Touch Simulator for Silverlight Phone 7 Michael Sync actually has a multi-touch simulator working for WP7 ... it involves a bunch of moving parts and one of the requirements is Windows 7, but if that works for you, this will too :) Element Property Binding Improvements in Blend 4 Beta and Visual Studio 2010 RC Rénald Nollet demonstrates new Blend and VS2010 features that assists you in Element Property binding with real examples. Projection Transforms Sans Math Charles Petzold is writing about Silverlight and 3D and specifically in this post 3D without math which becomes PlaneProjection... good long tutorial on it and code to back it all up. Daily Demo: Silverlight Install out of browser & Check for Update Behaviors The-Oliver has a post up about OOB and checking for updates using behaviors with only a slight change to your xaml... cool! Wizards. Prototype of sketching Wizard for WPF – 2 Max Paulousky has part 2 of his tutorial on a sketchflow Wizard for WPF ... yes WPF, but check it out... source too. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • SQL SERVER – 2000 – DBCC SQLPERF(waitstats) – Wait Type – Day 24 of 28

    - by pinaldave
    I have received many comments, email, suggestions and motivations for my current series of wait types and wait statistics. One of the questions which I keep on receiving almost every other day is whether all of the discussions I have presented so far are also applicable to SQL Server 2000. Additionally, I receive another question asking me if wait statistics matters in SQL Server 2000. If it is, then the asker wants to know how to measure wait types for SQL Server 2000. In SQL Server, you can run the following command to get a list of all the wait types: DBCC SQLPERF(waitstats) The query above will work in SQL Server 2005/2008/R2  because of backup compatibility. As you might have noticed, I have been discussing everything keeping SQL Server 2005+ in mind, but I have given little consideration on SQL Server 2000. However, I am pretty sure that most of the suggestions I have provided are applicable to SQL Server 2000. The wait types I have been discussing mostly exist in SQL Server 2000 as well. But the difference of the 2000 version is that it gets late recent releases, but it is worth it. Wait types are very essential to measure performance bottleneck. Because of this, I do not have to state that I am big fan of them just so I could identify performance bottleneck. Please read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • Accessing Server-Side Data from Client Script: Accessing JSON Data From an ASP.NET Page Using jQuery

    When building a web application, we must decide how and when the browser will communicate with the web server. The ASP.NET WebForms model greatly simplifies web development by providing a straightforward mechanism for exchanging data between the browser and the server. With WebForms, each ASP.NET page's rendered output includes a <form> element that performs a postback to the same page whenever a Button control within the form is clicked, or whenever the user modifies a control whose AutoPostBack property is set to True. On postback, the server sends the entire contents of the web page back to the browser, which then displays this new content. With WebForms we don't need to spend much time or effort thinking about how or when the browser will communicate with the server or how that returned information will be processed by the browser. It just works. While this approach certainly works and has its advantages, it's not without its drawbacks. The primary concern with postback forms is that they require a large amount of information to be exchanged between the browser and the server. Specifically, the browser sends back all of its form fields (including hidden ones, like view state, which may be quite large) and then the server sends back the entire contents of the web page. Granted, there are scenarios where this large quantity of data needs to be exchanged, but in many cases we can use techniques that exchange much less information. However, these techniques necessitate spending more time and effort thinking about how and when to have the browser communicate with the server and intelligently deciding on what information needs to be exchanged. This article, the first in a multi-part series, examines different techniques for accessing server-side data from a browser using client-side script. Throughout this series we will explore alternative ways to expose data on the server so that it can be accessed from the browser using script; we will also examine various tools for communicating with the server from JavaScript, including jQuery and the ASP.NET AJAX library. Read on to learn more! Read More >

    Read the article

  • OTN Virtual Developer Day for WebLogic Server and WebLogic Developer Broadcasts

    - by mike.lehmann
    To further move the new year of 2011 underway for WebLogic Server, quite a series of hands on technical online events and broadcasts are about to get underway from the WebLogic team. The first is Virtual Developer Day: Oracle WebLogic Server which is an online event that combines hands on labs with WebLogic Server through a series of Virtual Box images. This event will cover things like the new Java EE 6 capabilities one can use on WebLogic Server, using Maven and Hudson with WebLogic Server, developing with Web services on WebLogic Server and even upgrading from Oracle Application Server. Very technical, very hands on. And its global - multiple geographies covered.  Nice! James Bayer has put out a full agenda for this on his blog as well as links on how to register. The second is a 5 week long weekly technical broadcast under the umbrella of Accelerate Your Development with Oracle WebLogic Suite walking through topics like working with JPA, designing distributed caching strategies with WebLogic Server, advanced JMS topics and UI topics like JQuery as well restful Web services with Jersey and JAX-RS.  Again in James' blog the full agenda is available to check out if it is interesting for you to attend including a brief video introduction outlining in a bit more detail exactly what will be covered. Hopefully between these two events and the release of WebLogic Server 10.3.4 earlier in January, we are kicking off 2011 in a good fashion.  Looking forward to sharing more as we go forward in 2011.

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >