slava fomin ii - Page 43

R plotting multiple histograms on single plot to .pdf as a part of R batch script

- by Bryce Thomas

I am writing R scripts which play just a small role in a chain of commands I am executing from a terminal. Basically, I do much of my data manipulation in a Python script and then pipe the output to my R script for plotting. So, from the terminal I execute commands which look something like $python whatever.py | R CMD BATCH do_some_plotting.R. This workflow has been working well for me so far, though I have now reached a point where I want to overlay multiple histograms on the same plot, inspired by this answer to another user's question on Stackoverflow. Inside my R script, my plotting code looks like this: pdf("my_output.pdf") plot(hist(d$original,breaks="FD",prob=TRUE), col=rgb(0,0,1,1/4),xlim=c(0,4000),main="original - This plot is in beta") plot(hist(d$minus_thirty_minutes,breaks="FD",prob=TRUE), col=rgb(1,0,0,1/4),add=T,xlim=c(0,4000),main="minus_thirty_minutes - This plot is in beta") Notably, I am using add=T, which is presumably meant to specify that the second plot should be overlaid on top of the first. When my script has finished, the result I am getting is not two histograms overlaid on top of each other, but rather a 3-page PDF whose 3 individual plots contain the titles: i) Histogram of d$original ii) original - This plot is in beta iii) Histogram of d$minus_thirty_minutes So there's two points here I'm looking to clarify. Firstly, even if the plots weren't overlaid, I would expect just a 2-page PDF, not a 3-page PDF. Can someone explain why I am getting a 3-page PDF? Secondly, is there a correction I can make here somewhere to get just the two histograms plotted, and both of them on the same plot (i.e. 1-page PDF)? The other Stackoverflow question/answer I linked to in the first paragraph did mention that alpha-blending isn't supported on all devices, and so I'm curious whether this has anything to do with it. Either way, it would be good to know if there is a R-based solution to my problem or whether I'm going to have to pipe my data into a different language/plotting engine.

Read the article

identifier ... is undefined when trying to run pure C code in Cuda using nvcc

- by Lostsoul

I'm new and learning Cuda. A approach that I'm trying to use to learn is to write code in C and once I know its working start converting it to Cuda since I read that nvcc compiles Cuda code but complies everything else using plain old c. My code works in c(using gcc) but when I try to compile it using nvcc(after changing the file name from main.c to main.cu) I get main.cu(155): error: identifier "num_of_rows" is undefined main.cu(155): error: identifier "num_items_in_row" is undefined 2 errors detected in the compilation of "/tmp/tmpxft_00002898_00000000-4_main.cpp1.ii". Basically in my main method I send data to a function like this: process_list(count, countListItem, list); the first two items are ints and the last item(list) is a matrix. Then I create my function like this: void process_list(int num_of_rows, int num_items_in_row, int current_list[num_of_rows][num_items_in_row]) { This line is where I get my errors when using nvcc(line 155). I need to convert this code to cuda anyway so no need to troubleshoot this specific issue(plus code is quite large) but I'm wondering if I'm wrong about nvcc treating the C part of your code like plain C. In the book cuda by example I just used nvcc to compile but do I need any extra flags when just using pure c?

Read the article

What is a simple way to add a timer to a method

- by John

The following is in C#. I'm trying to do something very simple (I think). I have a method that loads an XML document XDocument doc = XDocument.Load(uri); , but I don't want to tie up pc resources if there are issues (connectivity, document size, etc.). So I'd like to be able to add a timeout variable that will cut the method off after a given number of seconds. I'm a newbie when it comes to asynchronous programming and find it confusing that there are so many examples written so many different ways . . . and none of them appear simple. I'd like a simple solution, if possible. Here's my thoughts so far on possible solution paths: 1) A method that wraps the existing load public XDocument LoadXDocument(string uri, int timeout){ //code } 2) A wrapper, but as an extension method XDocument doc = XDocument.LoadWithTimeout(string uri, int timeout); 3) A generic extension method. Object obj = SomeStaticClass.LoadWithTimeout(??? method, int timeout); 3), on its face seems really nice, because it would mean being able to generically add timeouts to many different method calls and not specifically tied to one type of object, but I suspect that it is either i)impossible or ii) very difficult. Please assist. Thanks.

Read the article

Toolbar to modify displayed html/content in IE / Firefox / Chrome.

- by JP

Hi, I want to create toolbar, whose functionality would be: Whenever the toolbar is "On/Activated", all pages should be parsed by a function, and the modified html should be displayed. [Example: i) There was this skype toolbar that would recognize phone-numbers in pages and automatically add skype links ii) If you have used MacAfee / Alexa toolbars, they modify the search results page displayed by Google My functionality would a lot simpler though] I want to create this for all browsers (though answers/pointers to any one platform would be appreciated). Please note that I am new to toolbar development, so detailed pointers from basics would be very helpful. I have heard to GreaseMonkey. However, if I can do it in a more "basic" way, it would be very helpful. (Alternately, tips to make a "custom" toolbar using GreaseMonkey would be welcome - though I would like to do away with ability to add scripts, etc. Also I installed greasemonkey and it does show up as a toolbar in FF/IE at all! In IE, there is separate executable to add scripts - I want a standalone toolbar with ON/OFF facility in the browser). Thanks much! Regards, JP

Read the article

android use local service to refresh map UI

- by urobo

I don't need a strict code related answer I just need somebody to tell me what I am missing. My application has to retrieve from a web service (xmlrpc) the positions of some users I know and update their position on a MapView. So I decided to use a Service and an Activity extending MapActivity to show results. I thought about two solutions: I ) start the service and make it ask every minute for these positions and send them to the activity as a bundle via intent. (This didn't work out well, since once shown I couldn't find a method to let the activity continue refresh itself until she stop receiving intents+data from the service) II ) Incorporate a thread within the activity which starts the service via context.startService(...) every minute. And the MapUI refresh itself once the service send back an intent and stop itself. (Maybe I will fall in the same problem category as before I haven't tryied yet). I am also giving directions (via maps.google ws) in this way I'd like to refresh only users positions on the map and save the route. What Am I missing do you have any suggestions? related to activities/services internal mechanics, don't know launch modes, use broadcast receivers or intent filters? Thanks in advance

Read the article

How do I launch a winforms form from a DLL correctly?

- by rodent31337

There's another question similar to mine, but I wanted to gather some specifics: I want to create a DLL that is called from unmanaged code. When the unmanaged functions are called in the DLL, I want to collect information and show it in a kind of form. What I'd like to do is, when DllMain() is called, and the reason is DLL_PROCESS_ATTACH, I would like to instantiate a form. This form should be run on a separate thread. When my function FOO() inside my DLL is called, I would like to take the information from FOO(), dispatch it to the form for rendering. So, more specifically: i) What is the proper way to create a DLL project and have the ability to have Windows forms created in the designer be available to the DLL? ii) What is the correct way to give this form its own thread and message processing loop? iii) How do I dispatch information from the unmanaged DLL functions to the form, or, alternatively a managed class that can update its own state and the form? The form inside the DLL is sort of a "monitor" for data passing in and out of the DLL, so I can keep track of errors/bugs, but not change the core functionality of the DLL functions that are available.

Read the article

C# Timer -- measuring time slower

- by Fassenkugel

I'm writing a code where: I.) The user adds "events" during run-time. (To a flowlayoutpanel) These events are turning some LEDs on/off, after "x" time has elapsed and the LED-turning functions are written in a Led-function.cs class. i.e: 1) Turn left led on After 3500ms 2) Turn right led on After 4000ms II.) When the user hits start a timer starts. // Create timer. System.Timers.Timer _timer; _timer = new System.Timers.Timer(); _timer.Interval = (1); _timer.Elapsed += (sender, e) => { HandleTimerElapsed(LedObject, device, _timer); }; _timer.Start(); III.) The timer's tick event is raised every millisecond and checks if the user definied time has ellapsed. Im measuring the elapsed time with adding +1 to an integer at every tick event. (NumberOfTicks++;) //Timer Handle private void HandleTimerElapsed(Led_Functions LedObject, string device, System.Timers.Timer _timer) { NumberOfTicks++; if (NumberOfTicks >= Start_time[0]) { LedObject.LeftLED_ONnobutton(device); } } IV.) What I noticed was that when the tick was set to 1. (So the tick event is raised every millisecond) Even if I set 3000ms to the evet the LED actually flashed around 6 seconds. When the tick was set to 100. (So every 0,1s) then the flash was more accurate (3,5sec or so). Any Ideas why im having this delay in time? Or do you have any ideas how could I implement it better? Thank you!

Read the article

How can I write a function template for all types with a particular type trait?

- by TC

Consider the following example: struct Scanner { template <typename T> T get(); }; template <> string Scanner::get() { return string("string"); } template <> int Scanner::get() { return 10; } int main() { Scanner scanner; string s = scanner.get<string>(); int i = scanner.get<int>(); } The Scanner class is used to extract tokens from some source. The above code works fine, but fails when I try to get other integral types like a char or an unsigned int. The code to read these types is exactly the same as the code to read an int. I could just duplicate the code for all other integral types I'd like to read, but I'd rather define one function template for all integral types. I've tried the following: struct Scanner { template <typename T> typename enable_if<boost::is_integral<T>, T>::type get(); }; Which works like a charm, but I am unsure how to get Scanner::get<string>() to function again. So, how can I write code so that I can do scanner.get<string>() and scanner.get<any integral type>() and have a single definition to read all integral types? Update: bonus question: What if I want to accept more than one range of classes based on some traits? For example: how should I approach this problem if I want to have three get functions that accept (i) integral types (ii) floating point types (iii) strings, respectively.

Read the article

How to highlight parent li text only on :hover?

- by metal-gear-solid

How to highlight Article only on mouse over? current when i hover on Article it highlights all child item also. Is it possible to highlight Articles only see example here http://jsbin.com/ubunu/2 <style> li:hover {background:red} li li:hover {background:yellow} </style> </head> <body> <p id="hello">Hello World</p> <ul> <li>Weblog</li> <li>Articles <ul> <li>How to Beat the Red Sox</li> <li>Pitching Past the 7th Inning <ul> <li>Part I</li> <li>Part II</li> </ul> </li> <li>Eighty-Five Years Isn't All That Long, Really</li> </ul> </li> <li>About</li> </ul>

Read the article

How to make buttons in python/pygame?

- by user1334014

I'm making a game in pygame and on the first screen I want there to be buttons that you can press to (i) start the game, (ii) load a new screen with instructions, and (iii) exit the program. I've found this code online for button making, but I don't really understand it (I'm not that good at object oriented programming). If I could get some explanation as to what it's doing that would be great. Also, when I use it and try to open a file on my computer using the file path, I get the error sh: filepath :Permission denied, which I don't know how to solve. #load_image is used in most pygame programs for loading images def load_image(name, colorkey=None): fullname = os.path.join('data', name) try: image = pygame.image.load(fullname) except pygame.error, message: print 'Cannot load image:', fullname raise SystemExit, message image = image.convert() if colorkey is not None: if colorkey is -1: colorkey = image.get_at((0,0)) image.set_colorkey(colorkey, RLEACCEL) return image, image.get_rect() class Button(pygame.sprite.Sprite): """Class used to create a button, use setCords to set position of topleft corner. Method pressed() returns a boolean and should be called inside the input loop.""" def __init__(self): pygame.sprite.Sprite.__init__(self) self.image, self.rect = load_image('button.png', -1) def setCords(self,x,y): self.rect.topleft = x,y def pressed(self,mouse): if mouse[0] > self.rect.topleft[0]: if mouse[1] > self.rect.topleft[1]: if mouse[0] < self.rect.bottomright[0]: if mouse[1] < self.rect.bottomright[1]: return True else: return False else: return False else: return False else: return False def main(): button = Button() #Button class is created button.setCords(200,200) #Button is displayed at 200,200 while 1: for event in pygame.event.get(): if event.type == MOUSEBUTTONDOWN: mouse = pygame.mouse.get_pos() if button.pressed(mouse): #Button's pressed method is called print ('button hit') if __name__ == '__main__': main() Thank you to anyone who can help me.

Read the article

The different of SHA512 between openssl and php

- by solomon_wzs

Here is C code: #include <openssl/sha.h> #include <stdio.h> char *hash_sha512(char *data){ SHA512_CTX ctx; char *md=malloc(sizeof(char)*(SHA512_DIGEST_LENGTH+1)); SHA512_Init(&ctx); SHA512_Update(&ctx, data, strlen(data)); SHA512_Final(md, &ctx); md[SHA512_DIGEST_LENGTH]='\0'; return md; } int main(int argc, char *argv[]){ str=hash_sha512("GFLOuJnR19881218"); printf("%s\n", str); free(str); return 1; } The output: ?<?4????IIA[r?? ?#? 6p?8jD????J?b9?????^X? Here is PHP code: $hash=hash('sha512', 'GFLOuJnR19881218', TRUE); The output: ?<??4??j??II?-A[r???? ??#??D6p?8jD???????J?b9?????^X? The results of C code and PHP code are different, what is wrong with my code?

Read the article

loading remote page into DOM with javascript

- by scoobydoo

I am trying to write a web widget which will allow users to display customized information (from my website) in their own web page. The mechanism I want to use (for creating the web widget) is javascript. So basically, I want to be able to write some javascript code like this (this is what the end user copies into their HTML page, to get my widget displayed in their page) <script type="text/javascript"> /* javascript here to fetch page from remote url and insert into DOM */ </script> I have two questions: how do I write a javascript code to fetch the page from the remote url? Ideally this will be PLAIN javascript (i.e. not using jQuery etc - since I dont want to force the user to get third party scripts jQuery which may conflict with other scripts on their page etc) The page I am fetching contains inline javascript, which gets executed in an body.onLoad event, as well as other functions which are used in response to user actions - my questions are: i). will the body.onLoad event be triggered for the retrieved document?. ii). If the retrieved page is dumped directly into the DOM, then the document will contain two <body> sections, which is no longer valid (X)HTML - however, I need the body.onLoad event to be triggered for the page to be setup correctly, and I also need the other functions in the retrieved page, for the retrieved page to be able to respond to the user interaction. Any suggestions/tips on how I can solve these problems?

Read the article

Which Android hardware devices should I test on? [closed]

- by Tchami

Read the article

Can I access type int (*)[] with [][]?

- by Framester

Hi coming from this question "What does (int (*)[])var1 stand for?" I tried to access the result of the cast like a multidimensional array. But I get following error: "assignment from incompatible pointer type" followed by a segmentation fault. I tried also some other variations, but none of them worked. How can I access the elements in var1 in the function example directly? Thank you! #include <stdlib.h> int i(int n,int m,int var1[n][m]) { var1[0][0]=5; return var1[0][0]; } int example() { int *var1 = malloc(100); // works int var2; var2 = i(10,10,(int (*)[])var1); printf("var2=%i",var2); //doesn't work I int *var3; var3=(int (*)[])var1; //"assignment from incompatible pointer type" printf("var3[0][0]=%i",var3[0][0]); //doesn't work II int *var4; var4=var1; printf("var4[0][0]=%i",var4[0][0]); //" error: subscripted value is neither array nor pointer" //doesn't work III int **var5; var5=var1; printf("var5[0][0]=%i",var5[0][0]); // assignment from incompatible pointer type return(1); } int main(){ int a; a=example(); return(1); }

Read the article

How to set up Mod_WSGI for Python on Ubuntu

- by AutomatedTester

Hi, I am trying to setup MOD_WSGI on my Ubuntu box. I have found steps that said I needed to do the following steps I found at http://ubuntuforums.org/showthread.php?t=833766 sudo apt-get install libapache2-mod-wsgi sudo a2enmod mod-wsgi sudo /etc/init.d/apache2 restart sudo gedit /etc/apache2/sites-available/default and update the Directory <Directory /var/www/> Options Indexes FollowSymLinks MultiViews ExecCGI AddHandler cgi-script .cgi AddHandler wsgi-script .wsgi AllowOverride None Order allow,deny allow from all </Directory> sudo /etc/init.d/apache2 restart Created test.wsgi with def application(environ, start_response): status = '200 OK' output = 'Hello World!' response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Step 2 fails because it says it can't find mod-wsgi even though the apt-get found it. If I carry on with the steps the python app just shows as plain text in a browser. Any ideas what I have done wrong? EDIT: Results for questions asked automatedtester@ubuntu:~$ dpkg -l libapache2-mod-wsgi Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-======================================-======================================-============================================================================================ ii libapache2-mod-wsgi 2.5-1 Python WSGI adapter module for Apache automatedtester@ubuntu:~$ dpkg -s libapache2-mod-wsgi Package: libapache2-mod-wsgi Status: install ok installed Priority: optional Section: python Installed-Size: 376 Maintainer: Ubuntu MOTU Developers <[email protected]> Architecture: i386 Source: mod-wsgi Version: 2.5-1 Depends: apache2, apache2.2-common, libc6 (>= 2.4), libpython2.6 (>= 2.6), python (>= 2.5), python (<< 2.7) Suggests: apache2-mpm-worker | apache2-mpm-event Conffiles: /etc/apache2/mods-available/wsgi.load 06d2b4d2c95b28720f324bd650b7cbd6 /etc/apache2/mods-available/wsgi.conf 408487581dfe024e8475d2fbf993a15c Description: Python WSGI adapter module for Apache The mod_wsgi adapter is an Apache module that provides a WSGI (Web Server Gateway Interface, a standard interface between web server software and web applications written in Python) compliant interface for hosting Python based web applications within Apache. The adapter provides significantly better performance than using existing WSGI adapters for mod_python or CGI. Original-Maintainer: Debian Python Modules Team <[email protected]> Homepage: http://www.modwsgi.org/ automatedtester@ubuntu:~$ sudo a2enmod libapache2-mod-wsgi ERROR: Module libapache2-mod-wsgi does not exist! automatedtester@ubuntu:~$ sudo a2enmod mod-wsgi ERROR: Module mod-wsgi does not exist! FURTHER EDIT FOR RMYates automatedtester@ubuntu:~$ apache2ctl -t -D DUMP_MODULES apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_worker_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgid_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) python_module (shared) setenvif_module (shared) status_module (shared) Syntax OK automatedtester@ubuntu:~$

Read the article

Installing gnome on Linode with Ubuntu 9.10 x64 - remote VNC/RDP

- by Kieran Benton

Hi, I'm a self confessed Linux newbie, having lived and worked mostly within the Windows world for most of my life. I'm making the effort to try moving my virtual host from a Windows box to a Linode instance to try and better learn Linux, and one of the uses I occasionally have with my current Windows VPS is to RDP into it and browse the internet. I'm aware that this is probably not best practice (from either performance or security), and most of the time I will be learning from the shell, but I do occasionally need to boot into a GUI. Because of this, I'd like the ability within my Ubuntu installation on Linode to start/stop Windows X and Gnome at will after SSHing in (startx? gdm?), so I've tried: apt-get install ubuntu-desktop Reboot startx But I've got an error that no amount of googling has helped me with so far, which I'm assuming is something to do with the fact the box is headless and X needs some more configuration that is beyond me at the moment: root@local:~# startx hostname: Unknown host xauth: creating new authority file /root/.Xauthority xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name "local.kieranbenton.com:0" in "list" command xauth: (stdin):1: bad display name "local.kieranbenton.com:0" in "add" command X.Org X Server 1.6.4 Release Date: 2009-9-27 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu Current Operating System: Linux local.kieranbenton.com 2.6.31.5-x86_64-linode9 #1 SMP Mon Oct 26 19:35:25 UTC 2009 x86_64 Kernel command line: root=/dev/xvda xencons=tty console=tty1 console=hvc0 nosep nodevfs ramdisk_size=32768 ro Build Date: 26 October 2009 05:19:56PM xorg-server 2:1.6.4-2ubuntu4 (buildd@) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 2 15:50:23 2009 Primary device is not PCI (==) Using default built-in configuration (21 lines) (EE) open /dev/fb0: No such file or directory (EE) No devices detected. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Can anyone give me any pointers as to how to go from here and get VNC/RDP setup? (RDP would be preferred?). Thanks.

Read the article

Installing gnome on Linode with Ubuntu 9.10 x64 - remote VNC/RDP

- by Kieran Benton

Hi, I'm a self confessed Linux newbie, having lived and worked mostly within the Windows world for most of my life. I'm making the effort to try moving my virtual host from a Windows box to a Linode instance to try and better learn Linux, and one of the uses I occasionally have with my current Windows VPS is to RDP into it and browse the internet. I'm aware that this is probably not best practice (from either performance or security), and most of the time I will be learning from the shell, but I do occasionally need to boot into a GUI. Because of this, I'd like the ability within my Ubuntu installation on Linode to start/stop Windows X and Gnome at will after SSHing in (startx? gdm?), so I've tried: apt-get install ubuntu-desktop Reboot startx But I've got an error that no amount of googling has helped me with so far, which I'm assuming is something to do with the fact the box is headless and X needs some more configuration that is beyond me at the moment: root@local:~# startx hostname: Unknown host xauth: creating new authority file /root/.Xauthority xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name "local.kieranbenton.com:0" in "list" command xauth: (stdin):1: bad display name "local.kieranbenton.com:0" in "add" command X.Org X Server 1.6.4 Release Date: 2009-9-27 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu Current Operating System: Linux local.kieranbenton.com 2.6.31.5-x86_64-linode9 #1 SMP Mon Oct 26 19:35:25 UTC 2009 x86_64 Kernel command line: root=/dev/xvda xencons=tty console=tty1 console=hvc0 nosep nodevfs ramdisk_size=32768 ro Build Date: 26 October 2009 05:19:56PM xorg-server 2:1.6.4-2ubuntu4 (buildd@) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 2 15:50:23 2009 Primary device is not PCI (==) Using default built-in configuration (21 lines) (EE) open /dev/fb0: No such file or directory (EE) No devices detected. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Can anyone give me any pointers as to how to go from here and get VNC/RDP setup? (RDP would be preferred?). Thanks.

Read the article

Using a 64bit Linux kernel, can't see more than 4GB of RAM in /proc/meminfo

- by Chris Huang-Leaver

I'm running my new computer which has 8GB of RAM installed, which is visable from BIOS page, does not show in /proc/meminfo uname -a Linux localhost 3.0.6-gentoo #2 SMP PREEMPT Sat Nov 19 10:45:22 GMT-- x86_64 AMD Phenom(tm) II X4 955 Processor AuthenticAMD GNU/Linux The result of /proc/meminfo is as follows: (thans Andrey) MemTotal: 4021348 kB MemFree: 1440280 kB Buffers: 23696 kB Cached: 1710828 kB SwapCached: 4956 kB Active: 1389904 kB Inactive: 841364 kB Active(anon): 1337812 kB Inactive(anon): 714060 kB Active(file): 52092 kB Inactive(file): 127304 kB Unevictable: 32 kB Mlocked: 32 kB SwapTotal: 8388604 kB SwapFree: 8047900 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 492732 kB Mapped: 47528 kB Shmem: 1555120 kB Slab: 267724 kB SReclaimable: 177464 kB SUnreclaim: 90260 kB KernelStack: 1176 kB PageTables: 12148 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 10399276 kB Committed_AS: 3293896 kB VmallocTotal: 34359738367 kB VmallocUsed: 317008 kB VmallocChunk: 34359398908 kB AnonHugePages: 120832 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 23552 kB DirectMap2M: 3088384 kB DirectMap1G: 1048576 kB I have tried using mem=8G as a kernel boot parameter, I read a post about setting HIGHMEM64G to yes, before realising that only applies to 32bit kernels. Trying dmindecode -t memory SMBIOS 2.7 present. Handle 0x0026, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0028, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: Array1_PartNumber0 Rank: Unknown Handle 0x002A, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: Array1_PartNumber1 Rank: Unknown Handle 0x002C, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: BANK2 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer2 Serial Number: SerNum2 Asset Tag: AssetTagNum2 Part Number: Array1_PartNumber2 Rank: Unknown Handle 0x002E, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: BANK3 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer3 Serial Number: SerNum3 Asset Tag: AssetTagNum3 Part Number: Array1_PartNumber3 Rank: Unknown

Read the article

Using an SSD with no AHCI [ICH7 base] - Windows 7 hangs frequently

- by h4xnoodle

I have a Shuttle Intel G31 + ICH7 (base -- not M/R etc) system. I just bought an OCZ Vertex 3 120gb [VTX3-25SAT3-120G] which includes the Sandforce 2218 firmware. The ICH7 does not support AHCI. I understand that this can be a problem. What I don't understand, is if it's necessary to have the proper performance of this drive. I know that without AHCI I may get a limited read/write speed -- this is fine. What my concern is, is the constant freezing/hangs I'm getting with Windows 7 on any disk activity. The 'Highest Active Time' flip-flops from 0 to 100% every minute or so regardless of large or small files. EDIT: The threads/processes with the highest response time is the kernel. I've been reading about other people with Shuttle SG31G2s, and they seem to be using SSDs no problem. Is this the controller's fault? The fact that I do not have AHCI enabled? It makes sense to me that if this SSD requires AHCI features that it would cause Windows to hang, but I would like to fully determine my situation before returning things/reformatting. To initially have my drive recognise the SSD at all, I had to change the BIOS option to Force Gen II instead of Auto for the SATA controller. I then installed Windows with no problem. There were no errors in the event log related to disk usage, but watching the perfmon I could see the highest active time and the processes (usually pagefile.sys being written to, or chrome/firefox caching) which was correlated to the hanging. So now what I need answered is: should I be returning this SSD and getting one with a different controller, or returning the SSD all-together as it will never work out and I will continue to get these hangs. Posts I've read: Windows 7 New SSD SATA AHCI? -- suggests to use AHCI http://forums.anandtech.com/showthread.php?t=2189868 -- Sandforce issues Windows 7 freezes with SSD -- and attached posts Why does my Windows 7 PC / SSD drive keep freezing? -- this is not the controller I have, but still a related issue. Windows 7 hangs after longer inactivity of user -- also tried messing with power settings with no luck. It was already set to 'Never' for turning off HDDs.

Read the article

Android emulator performance on linux

- by Rado

I installed the android SDK and eclipse plugin on my laptop, but I was surprised to find out that the emulator eats up 100% of one of my cpu cores. I have exactly the same setup on a desktop machine that does not have this issue. Both computers are running arch linux and both were updated yesterday. Granted, the desktop has better hardware than the laptop, but I was expecting to get closer to 50% cpu usage than 100% on the laptop. Both android virtual devices have the same specs: CPU: ARM Target: Android 2.3.3 - API Level 10 Skin: WVGA800 SD Card: 512M hw.lcd.density: 240 vm.heapSize: 24 hw.ramSize: 256 Laptop host has Intel Core 2 T7200 @ 2GHz cpu with 2Gb RAM. Desktop host has AMD Phenom II X4 940 @ 3GHz cpu with 8Gb RAM. The android emulator uses only 1 core and here are the CPU usage results: Laptop: Cpu0 : 22.8%us, 76.5%sy, 0.0%ni, 0.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu1 : 11.2%us, 2.4%sy, 0.0%ni, 86.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055484k total, 1860304k used, 195180k free, 5276k buffers Swap: 2000088k total, 106872k used, 1893216k free, 350780k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2026 xyz 20 0 396m 207m 7192 R 100 10.3 4:11.58 emulator-arm Desktop: Cpu0 : 0.7%us, 0.0%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 1.3%us, 0.0%sy, 0.0%ni, 98.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 5.0%us, 1.3%sy, 0.0%ni, 91.9%id, 1.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.3%us, 0.3%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7666324k total, 6506808k used, 1159516k free, 1650960k buffers Swap: 8988348k total, 0k used, 8988348k free, 2867300k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2811 xyz 20 0 392m 220m 6276 S 8 2.9 0:33.58 emulator-arm Is there any way I can improve the emulator performance on the laptop? [UPDATE] I ran the emulator with the same settings, on the same laptop under Win7 and after starting up, it didn't use 100% of a CPU core unlike under linux. Also, I tried running the emulator from a terminal in Linux and I get this message when I don't get it under the desktop Linux host: Could not configure '/dev/hpet' to have a 1024Hz timer. This is not a fatal error, but for better emulation accuracy type: 'echo 1024 /proc/sys/dev/hpet/max-user-freq' as root. I'm not really familiar with rtc or hpet, but it doesn't seem that max-user-freq setting does anything, I still get the same warning.

Read the article

OCZ Vertex 2 not recognized by Ubuntu installer

- by Zsub

As I boot into the Ubuntu 10.10 (or 11.04, doesn't matter) live environment or installer, it just refuses to recognise my Vertex 2. It reports the disk as ATA and not supporting smart, shows no serial number, and doesn't list the size correctly. All fdisk tells me is Unable to read /dev/sda (it's the only storage in the PC). I'm now running a temporary install of Windows 7 off of it, which worked like a charm, so where am I going wrong with Ubuntu... Specs: Asus M4N68T-M LE V2 (BIOS 0702, most recent) OCZ Vertex 2 SSD 60 GB Amd Athlon II X4 640 Patriot PSD34G13332 4GB DDR3 ram (two banks) EDIT I installed a second drive, installed Ubuntu on that and booted, it recognised the SSD just fine. I'm now trying to apt-get upgrade the live-environment. I wonder if there is any way to sort of install Ubuntu from Ubuntu (I boot into the working install on the other drive, install it on the SSD and then boot from the SSD). EDIT2 Ok, so that doesn't work. The install detects the SSD, however, it cannot format it. EDIT3 After a fresh boot I can read out SMART-data and even perform a read-benchmark, but if I try to format it, or do a write-bench, it'll crap out and after that it says SMART is not supported. So basically it seems I can't write to the disk, as it will stop working when I do, I will try to run repeated read-benchmarks to see if that has any effect. EDIT4 I'm running several read benchmarks on the drive right now, they give results that are to be expected from an SSD. If the read-benches don't fail, I can use fdisk on the disk, but it is now stuck trying to re-read the partition table after issueing the 'w' command. EDIT5 Parted Magic did recognize the drive and with hdparm -I even could tell me the drive was in a frozen state. I powercycled it (just pull out the plug from the SSD and plug it back in) and it wasn't frozen anymore. After that I could upgrade the firmware on the drive (still using Parted Magic) and format it to Ext4. After I rebooted into the Ubuntu installer, it wouldn't get recognized and hdparm didn't want to talk to it saying HDIO_DRIVE_CMD(identify) failed: Invalid exchange. EDIT6 For some reason if I enable one of the RAID controllers (the one the SSD is connected to, obviously) Ubuntu will let me format it, mount it and write to it. The installer also recognizes it. However if the raid controller is enabled but no array is defined the motherboard can't boot from it :(

Read the article

Some apps very slow to load on Windows 7, copy & paste very slow.

- by Mike

Hello, I searched here and couldn't find a similar issue to mine but apologies if I missed it. I've searched the web and no one else seems to be having the same issue either. I'm running Windows 7 Ultimate 64bit on a pretty high spec. machine (well, apart from the graphics): Asus M4A79T Deluxe AMD Phenom II 965 black edition (quad core, 3.4GHz) 8GB Crucial Ballistix DDR 1333MHz RAM 80GB Intex X25 SSD for OS 500GB mechanical drive for data. ATi Radeon HD 4600 series PCI-e Be Quiet! 850W PSU I think those are all the relevant stats, if you need anything else let me know. I've updated chipset, graphics and various other drivers all to no avail, the problem remains. I have also unplugged and replugged every connection internally and cleaned the RAM edge connectors. The problems: Video LAN (VLC) and CDBurnerXP both take ages to load, I'm talking 30 seconds and 1 minute respectively which is really not right. Copy and paste from Open Office spread sheet into Fire Fox, for example, is really, really slow, I'll have pressed control V 5 or 6 times before it actually happens, if I copy and then wait 5 to 10 seconds or so it'll paste first time so it's definitely some sort of time lag. Command and Conquer - Generals: Zero Hour. When playing it'll run perfectly for about 10 or 20 seconds then it'll just pause for 3 or 4 then run for another 10 or 20 seconds and pause again and so on. I had the Task Manager open on my 2nd monitor whilst playing once and I noticed it was using about 25% of the CPU, pretty stable but when the pause came another task didn't shoot up to 100% like others on the web have been reporting (similar but not the same as my issue, often svchost.exe for them) but dropped to 2 or 3% usage then back up to 25% when it started playing properly again. Very odd! But it gets even odder... I had a BSOD and reboot last week, when it rebooted the problem had completely gone, I could play C&C to my heart's content and both the other apps loaded instantly, copy and paste worked instantly too. I did an AVG update earlier this week which required a reboot, rebooted and the problem's back. I don't think it's AVG related though, I think it was just coincidence that's the app that required a reboot. I think any reboot would have brought the issue back. A number of reboots later and it hasn't gone away again. If any one could make any suggestions as to the likely cause and solution to these issues I'd be most grateful, it's driving me nuts! Thanks, Mike....

Read the article

SSD Fresh Does Not Start

- by Jim Fell

I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

Read the article

recommendations for efficient offsite remote backup solution of vm's

- by senorsmile

I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

Read the article

Apache works on http and https, SVN only on http

- by user27880

I asked a question about this before, and got most of it fixed. If I switch off https redirect and go to http://mydomain.com/svn/test0, I get the authentication window popping up, and I can enter my AD credentials, and bingo. Switching https redirect back on, if I go to http://mydomain.com I am automatically redirected to https, which is what I want, and the 'CerntOS test page' pops up. Perfect. The problem occurs when I want to go to one of my test repos via https. Here is my httpd.conf file, with confidential information suitably hosed... === NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName svn.mycompany.com ErrorLog logs/subversion-error_log CustomLog logs/subversion-access_log common Redirect permanent / https://svn.mycompany.com </VirtualHost> <VirtualHost svn.mycompany.com:443> SSLEngine On SSLCertificateFile /etc/httpd/ssl/wildcard.mycompany.com.crt SSLCertificateKeyFile /etc/httpd/ssl/wildcard.mycompany.com.key SSLCertificateChainFile /etc/httpd/ssl/intermediate.crt ServerName svn.mycompany.com ServerAdmin [email protected] ErrorLog logs/subversion-error_log CustomLog logs/subversion-access_log common <Location /svn> DAV svn SVNParentPath /usr/local/subversion SVNListParentPath off AuthName "Subversion Repositories" # NT Logon Details Require valid-user AuthBasicProvider file ldap AuthType Basic AuthzLDAPAuthoritative off AuthUserFile /etc/httpd/conf/svnpasswd AuthName "Subversion Server II" AuthLDAPURL "ldap://our-pdc:389/OU=Company Name,DC=com,DC=co,DC=uk?sAMAccountName?sub?(objectClass=*)" AuthLDAPBindDN "DOMAIN\subversion" AuthLDAPBindPassword XXXXXXX AuthzSVNAccessFile /etc/httpd/conf/svnaccessfile </Location> </VirtualHost> === Now, in ssl_error_log, I get === ==> /etc/httpd/logs/ssl_error_log <== [Fri Nov 01 16:07:55 2013] [error] [client XXX.XXX.XXX.XXX] File does not exist: /var/www/html/svn === This comes from the DocumentRoot directive further up the httpd.conf file, which of course points to /var/www/html. I know that this location is wrong, but how can I get SVN to serve the repo? I tried an Alias directive as so .. Alias /svn /usr/local/subversion .. but this didn't work. I tried to alter the Location directive. That didn't work either. Can someone help? I sense that this is so close to being solved ... Thanks. Edit: apachectl -S output: [root@svn conf]# apachectl -S VirtualHost configuration: 127.0.0.1:443 svn.mycompany.com (/etc/httpd/conf/httpd.conf:1020) wildcard NameVirtualHosts and default servers: default:443 svn.mycompany.com (/etc/httpd/conf.d/ssl.conf:74) *:80 is a NameVirtualHost default server svn.mycompany.com (/etc/httpd/conf/httpd.conf:1012) port 80 namevhost svn.mycompany.com (/etc/httpd/conf/httpd.conf:1012) Syntax OK

Search Results

Search found 1204 results on 49 pages for 'slava fomin ii'.

Page 43/49 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 | Next Page >

- by Bryce Thomas

- by Lostsoul

- by John

- by JP

- by urobo

- by rodent31337

- by Fassenkugel

- by TC

- by metal-gear-solid

- by user1334014

- by solomon_wzs

- by scoobydoo

- by Tchami

- by Framester

- by AutomatedTester

- by Kieran Benton

- by Kieran Benton

- by Chris Huang-Leaver

- by h4xnoodle

- by Rado

- by Zsub

- by Mike

- by Jim Fell

- by senorsmile

- by user27880

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 | Next Page >