Search Results

Search found 14784 results on 592 pages for 'spring security'.

Page 43/592 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • Can't connect to SSL web service with WS-Security using PHP SOAP extension - certificate, complex WSDL

    - by BillF
    Using the PHP5 SOAP extension I have been unable to connect to a web service having an https endpoint, with client certificate and using WS-Security, although I can connect using soapUI with the exact same wsdl and client certificate, and obtain the normal response to the request. There is no HTTP authentication and no proxy is involved. The message I get is 'Could not connect to host'. Have been able to verify that I am NOT hitting the host server. (Earlier I wrongly said that I was hitting the server.) The self-signed client SSL certificate is a .pem file converted by openssl from a .p12 keystore which in turn was converted by keytool from a .jks keystore having a single entry consisting of private key and client certificate. In soapUI I did not need to supply a server private certificate, the only two files I gave it were the wdsl and pem. I did have to supply the pem and its passphrase to be able to connect. I am speculating that despite the error message my problem might actually be in the formation of the XML request rather than the SSL connection itself. The wsdl I have been given has nested complex types. The php server is on my Windows XP laptop with IIS. The code, data values and WSDL extracts are shown below. (The WSSoapClient class simply extends SoapClient, adding a WS-Security Username Token header with mustUnderstand = true and including a nonce, both of which the soapUI call had required.) Would so much appreciate any help. I'm a newbie thrown in at the deep end, and how! Have done vast amounts of Googling on this over many days, following many suggestions and have read Pro PHP by Kevin McArthur. An attempt to use classmaps in place of nested arrays also fell flat. The Code class STEeService { public function invokeWebService(array $connection, $operation, array $request) { try { $localCertificateFilespec = $connection['localCertificateFilespec']; $localCertificatePassphrase = $connection['localCertificatePassphrase']; $sslOptions = array( 'ssl' => array( 'local_cert' => $localCertificateFilespec, 'passphrase' => $localCertificatePassphrase, 'allow_self-signed' => true, 'verify_peer' => false ) ); $sslContext = stream_context_create($sslOptions); $clientArguments = array( 'stream_context' => $sslContext, 'local_cert' => $localCertificateFilespec, 'passphrase' => $localCertificatePassphrase, 'trace' => true, 'exceptions' => true, 'encoding' => 'UTF-8', 'soap_version' => SOAP_1_1 ); $oClient = new WSSoapClient($connection['wsdlFilespec'], $clientArguments); $oClient->__setUsernameToken($connection['username'], $connection['password']); return $oClient->__soapCall($operation, $request); } catch (exception $e) { throw new Exception("Exception in eServices " . $operation . " ," . $e->getMessage(), "\n"); } } } $connection is as follows: array(5) { ["username"]=> string(8) "DFU00050" ["password"]=> string(10) "Fabricate1" ["wsdlFilespec"]=> string (63) "c:/inetpub/wwwroot/DMZExternalService_Concrete_WSDL_Staging.xml" ["localCertificateFilespec"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["localCertificatePassphrase"]=> string(14) "password123456" } $clientArguments is as follows: array(7) { ["stream_context"]=> resource(8) of type (stream-context) ["local_cert"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["passphrase"]=> string(14) "password123456" ["trace"]=> bool(true) ["exceptions"]=> bool(true) ["encoding"]=> string(5) "UTF-8" ["soap_version"]=> int(1) } $operation is as follows: 'getConsignmentDetails' $request is as follows: array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } Note how there is an extra level of nesting, an array wrapping the request which is itself an array. This was suggested in a post although I don't see the reason, but it seems to help avoid other exceptions. The exception thrown by ___soapCall is as follows: object(SoapFault)#6 (9) { ["message":protected]=> string(25) "Could not connect to host" ["string":"Exception":private]=> string(0) "" ["code":protected]=> int(0) ["file":protected]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line":protected]=> int(85) ["trace":"Exception":private]=> array(5) { [0]=> array(6) { ["file"]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line"]=> int(85) ["function"]=> string(11) "__doRequest" ["class"]=> string(10) "SoapClient" ["type"]=> string(2) "->" ["args"]=> array(4) { [0]=> string(1240) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z customerA10072906GKQ00000085 " [1]=> string(127) "https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1" [2]=> string(104) "/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1/getConsignmentDetails" [3]=> int(1) } } [1]=> array(4) { ["function"]=> string(11) "__doRequest" ["class"]=> string(39) "startrackexpress\eservices\WSSoapClient" ["type"]=> string(2) "->" ["args"]=> array(5) { [0]=> string(1240) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z customerA10072906GKQ00000085 " [1]=> string(127) "https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1" [2]=> string(104) "/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1/getConsignmentDetails" [3]=> int(1) [4]=> int(0) } } [2]=> array(6) { ["file"]=> string(43) "C:\Inetpub\wwwroot\eServices\WSSecurity.php" ["line"]=> int(70) ["function"]=> string(10) "__soapCall" ["class"]=> string(10) "SoapClient" ["type"]=> string(2) "->" ["args"]=> array(4) { [0]=> string(21) "getConsignmentDetails" [1]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } [2]=> NULL [3]=> object(SoapHeader)#5 (4) { ["namespace"]=> string(81) "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" ["name"]=> string(8) "Security" ["data"]=> object(SoapVar)#4 (2) { ["enc_type"]=> int(147) ["enc_value"]=> string(594) " DFU00050 Fabricate1 E0ByMUA= 2010-10-28T13:13:52Z " } ["mustUnderstand"]=> bool(true) } } } [3]=> array(6) { ["file"]=> string(42) "C:\Inetpub\wwwroot\eServices\eServices.php" ["line"]=> int(87) ["function"]=> string(10) "__soapCall" ["class"]=> string(39) "startrackexpress\eservices\WSSoapClient" ["type"]=> string(2) "->" ["args"]=> array(2) { [0]=> string(21) "getConsignmentDetails" [1]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } } } [4]=> array(6) { ["file"]=> string(58) "C:\Inetpub\wwwroot\eServices\EnquireConsignmentDetails.php" ["line"]=> int(44) ["function"]=> string(16) "invokeWebService" ["class"]=> string(38) "startrackexpress\eservices\STEeService" ["type"]=> string(2) "->" ["args"]=> array(3) { [0]=> array(5) { ["username"]=> string(10) "DFU00050 " ["password"]=> string(12) "Fabricate1 " ["wsdlFilespec"]=> string(63) "c:/inetpub/wwwroot/DMZExternalService_Concrete_WSDL_Staging.xml" ["localCertificateFilespec"]=> string(37) "c:/inetpub/wwwroot/ClientKeystore.pem" ["localCertificatePassphrase"]=> string(14) "password123456" } [1]=> string(21) "getConsignmentDetails" [2]=> array(1) { [0]=> array(2) { ["header"]=> array(2) { ["source"]=> string(9) "customerA" ["accountNo"]=> string(8) "10072906" } ["consignmentId"]=> string(11) "GKQ00000085" } } } } } ["previous":"Exception":private]=> NULL ["faultstring"]=> string(25) "Could not connect to host" ["faultcode"]=> string(4) "HTTP" } Here are some WSDL extracts (TIBCO BusinessWorks): <xsd:complexType name="TransactionHeaderType"> <xsd:sequence> <xsd:element name="source" type="xsd:string"/> <xsd:element name="accountNo" type="xsd:integer"/> <xsd:element name="userId" type="xsd:string" minOccurs="0"/> <xsd:element name="transactionId" type="xsd:string" minOccurs="0"/> <xsd:element name="transactionDatetime" type="xsd:dateTime" minOccurs="0"/> </xsd:sequence> </xsd:complexType> <xsd:element name="getConsignmentDetailRequest"> <xsd:complexType> <xsd:sequence> <xsd:element name="header" type="prim:TransactionHeaderType"/> <xsd:element name="consignmentId" type="prim:ID" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailResponse"> <xsd:complexType> <xsd:sequence> <xsd:element name="consignment" type="freight:consignmentType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailRequest"> <xsd:complexType> <xsd:sequence> <xsd:element name="header" type="prim:TransactionHeaderType"/> <xsd:element name="consignmentId" type="prim:ID" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="getConsignmentDetailResponse"> <xsd:complexType> <xsd:sequence> <xsd:element name="consignment" type="freight:consignmentType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> </xsd:complexType> </xsd:element> <wsdl:operation name="getConsignmentDetails"> <wsdl:input message="tns:getConsignmentDetailsRequest"/> <wsdl:output message="tns:getConsignmentDetailsResponse"/> <wsdl:fault name="fault1" message="tns:fault"/> </wsdl:operation> <wsdl:service name="ExternalOps"> <wsdl:port name="OperationsEndpoint1" binding="tns:OperationsEndpoint1Binding"> <soap:address location="https://services.startrackexpress.com.au:7560/DMZExternalService/InterfaceServices/ExternalOps.serviceagent/OperationsEndpoint1"/> </wsdl:port> </wsdl:service> And here in case it's relevant is the WSSoapClient class: <?PHP namespace startrackexpress\eservices; use SoapClient, SoapVar, SoapHeader; class WSSoapClient extends SoapClient { private $username; private $password; /*Generates a WS-Security header*/ private function wssecurity_header() { $timestamp = gmdate('Y-m-d\TH:i:s\Z'); $nonce = mt_rand(); $passdigest = base64_encode(pack('H*', sha1(pack('H*', $nonce).pack('a*', $timestamp).pack('a*', $this->password)))); $auth = ' <wsse:Security SOAP-ENV:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken> <wsse:Username>' . $this->username . '</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">' . $this->password . '</wsse:Password> <wsse:Nonce>' . base64_encode(pack('H*', $nonce)).'</wsse:Nonce> <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">' . $timestamp . '</wsu:Created> </wsse:UsernameToken> </wsse:Security> '; $authvalues = new SoapVar($auth, XSD_ANYXML); $header = new SoapHeader("http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd", "Security",$authvalues, true); return $header; } // Sets a username and passphrase public function __setUsernameToken($username,$password) { $this->username=$username; $this->password=$password; } // Overwrites the original method, adding the security header public function __soapCall($function_name, $arguments, $options=null, $input_headers=null, $output_headers=null) { try { $result = parent::__soapCall($function_name, $arguments, $options, $this->wssecurity_header()); return $result; } catch (exception $e) { throw new Exception("Exception in __soapCall, " . $e->getMessage(), "\n"); } } } ?> Update: The request XML would have been as follows: <?xml version="1.0" encoding="UTF-8"?> <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://startrackexpress/Common/Primitives/v1" xmlns:ns2="http://startrackexpress/Common/actions/externals/Consignment/v1" xmlns:ns3="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <SOAP-ENV:Header> <wsse:Security SOAP-ENV:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken> <wsse:Username>DFU00050</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">Fabricate1</wsse:Password> <wsse:Nonce>M4FIeGA=</wsse:Nonce> <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2010-10-29T14:05:27Z</wsu:Created> </wsse:UsernameToken> </wsse:Security> </SOAP-ENV:Header> <SOAP-ENV:Body><ns2:getConsignmentDetailRequest> <ns2:header><ns1:source>customerA</ns1:source><ns1:accountNo>10072906</ns1:accountNo></ns2:header> <ns2:consignmentId>GKQ00000085</ns2:consignmentId> </ns2:getConsignmentDetailRequest></SOAP-ENV:Body> </SOAP-ENV:Envelope> This was obtained with the following code in WSSoapClient: public function __doRequest($request, $location, $action, $version) { echo "<p> " . htmlspecialchars($request) . " </p>" ; return parent::__doRequest($request, $location, $action, $version); }

    Read the article

  • Is it worth hiring a hacker to perform some penetration testing on my servers ?

    - by Brann
    I'm working in a small IT company with paranoid clients, so security has always been an important consideration to us ; In the past, we've already mandated two penetration testing from independent companies specialized in this area (Dionach and GSS). We've also ran some automated penetration tests using Nessus. Those two auditors were given a lot of insider information, and found almost nothing* ... While it feels comfortable to think our system is perfectly sure (and it was surely comfortable to show those reports to our clients when they performed their due diligence work), I've got a hard time believing that we've achieved a perfectly sure system, especially considering that we have no security specialist in our company (Security has always been a concern, and we're completely paranoid, which helps, but that's far as it goes!) If hackers can hack into companies that probably employ at least a few people whose sole task is to ensure their data stays private, surely they could hack into our small business, right ? Does someone have any experience in hiring an "ethical hacker"? How to find one? How much would it cost? *The only recommendation they made us was to upgrade our remote desktop protocols on two windows servers, which they were able to access because we gave them the correct non-standard port and whitelisted their IP

    Read the article

  • Injecting the application TransactionManager into a JPA EntityListener

    - by nodje
    I want to use the JPA EntityListener to support spring security ACLs. On @PostPersist events, I create a permission corresponding to the persisted entity. I need this operation to participate to the current Transaction. For this to happen I need to have a reference to the application TransactionManager in the EntityListener. The problem is, Spring can't manage the EntityListener as it is created automatically when EntityManagerFactory is instantiated. And in a classic Spring app, the EntityManagerFactory is itself created during the TransactioManager instantiation. <bean id="transactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory" /> </bean> So I have no way to inject the TransactionManager with the constructor, as it is not yet instantiated. Making the EntityManager a @Component create another instance of the EntityManager. Implementing InitiliazingBean and using afterPropertySet() doesn't work as it's not a Spring managed bean. Any idea would be helpful as I'm stuck and out of ideas.

    Read the article

  • How to configure Amazon Security Groups to achieve multi-tier architecture?

    - by ks78
    What is the preferred way to configure Amazon Security Groups to achieve a multi-tier architecture? Each of my instances has its own Security Group, which I only want to use for rules specific to an instance. I'd like to keep any rules which apply to multiple instances in a separate Security Group, which can then be assigned to instance Security Groups as necessary. As an example, I've setup a group called "admin", which allows administrative access from my IP. I added the "admin" group as the source to each of my instance security groups. However, I still can't access the instances from my IP without adding the rules directly to the instance's group. Am I missing something? Although it seems a multi-tier security architecture should be possible, it doesn't seem to be working.

    Read the article

  • How to configure Amazon Security Groups to achieve multi-tier architecture?

    - by ks78
    What is the preferred way to configure Amazon Security Groups to achieve a multi-tier architecture? Each of my instances has its own Security Group, which I only want to use for rules specific to an instance. I'd like to keep any rules which apply to multiple instances in a separate Security Group, which can then be assigned to instance Security Groups as necessary. As an example, I've setup a group called "admin", which allows administrative access from my IP. I added the "admin" group as the source to each of my instance security groups. However, I still can't access the instances from my IP without adding the rules directly to the instance's group. Am I missing something? Although it seems a multi-tier security architecture should be possible, it doesn't seem to be working.

    Read the article

  • Globe Trotters: Asian Healthcare CIOs need ‘Security Inside Out’ Approach

    - by Tanu Sood
    In our second edition of Globe trotters, wanted to share a feature article that was recently published in Enterprise Innovation. EnterpriseInnovation.net, part of Questex Media Group, is Asia's premier business and technology publication. The article featured MOH Holdings (a holding company of Singapore’s Public Healthcare Institutions) and highlighted the project around National Electronic Health Record (NEHR) system currently being deployed within Singapore.  According to the feature, the NEHR system was built to facilitate seamless exchanges of medical information as patients move across different healthcare settings and to give healthcare providers more timely access to patient’s healthcare records in Singapore. The NEHR consolidates all clinically relevant information from patients’ visits across the healthcare system throughout their lives and pulls them in as a single record. It allows for data sharing, making it accessible to authorized healthcare providers, across the continuum of care throughout the country. In healthcare, patient data privacy is critical as is the need to avoid unauthorized access to the electronic medical records. As Alan Dawson, director for infrastructure and operations at MOH Holdings is quoted in the feature, “Protecting the perimeter is no longer enough. Healthcare CIOs today need to adopt a ‘security inside out’ approach that protects information assets all the way from databases to end points.” Oracle has long advocated the ‘Security Inside Out’ approach. From operating systems, infrastructure to databases, middleware all the way to applications, organizations need to build in security at every layer and between these layers. This comprehensive approach to security has never been as important as it is today in the social, mobile, cloud (SoMoClo) world. To learn more about Oracle’s Security Inside Out approach, visit our Security page. And for more information on how to prevent unauthorized access, streamline user administration, bolster security and enforce compliance in healthcare, learn more about Oracle Identity Management.

    Read the article

  • JBoss 7.1.1 + Spring 3.1 + JPA 2 (Hibernate 3.6.8) > Cannot parse beans.xml

    - by Mashrur
    Trying to deploy a JSF 2 app with Spring 3.1 + JPA 2 (Hibernte 3.6.8) into JBoss 7.1.1 AS. The app was working fine on tomcat 7. Now, I have already added and changed some configurations. Added jboss-deployment-structure.xml <jboss-deployment-structure xmlns="urn:jboss:deployment-structure:1.1"> <deployment> <exclusions> <module name="org.apache.log4j" /> <module name="javax.faces.api" slot="main"/> <module name="com.sun.jsf-impl" slot="main"/> <module name="org.hibernate"/> <module name="org.javassist" /> <module name="javaee.api" /> <module name="org.hibernate.validator" /> <module name="org.jboss.as.web" /> <module name="org.jboss.logging" /> <module name="javax.persistence.api" /> <module name="org.jboss.interceptor" /> </exclusions> </deployment> </jboss-deployment-structure> 2. Inside web.xml added these lines: <persistence-unit-ref> <persistence-unit-ref-name>persistence/persistenceUnit</persistence-unit-ref-name> <persistence-unit-name>persistenceUnit</persistence-unit-name> </persistence-unit-ref> 3. Inside applicationContext.xml, changed bean definition for entityManagerFactory by adding this property <property name="persistenceXmlLocation" value="classpath*:META-INF/persistence.xml"/> Now, do I still need to do something more than these which is obvious to you? Because, while I am trying to deploy it from eclipse indigo SR2, getting this 14:10:32,046 INFO [org.jboss.modules] JBoss Modules version 1.1.1.GA 14:10:33,054 INFO [org.jboss.msc] JBoss MSC version 1.0.2.GA 14:10:33,200 INFO [org.jboss.as] JBAS015899: JBoss AS 7.1.1.Final "Brontes" starting 14:10:36,375 INFO [org.xnio] XNIO Version 3.0.3.GA 14:10:36,384 INFO [org.jboss.as.server] JBAS015888: Creating http management service using socket-binding (management-http) 14:10:36,432 INFO [org.xnio.nio] XNIO NIO Implementation Version 3.0.3.GA 14:10:36,462 INFO [org.jboss.remoting] JBoss Remoting version 3.2.3.GA 14:10:36,587 INFO [org.jboss.as.logging] JBAS011502: Removing bootstrap log handlers 14:10:36,714 INFO [org.jboss.as.security] (ServerService Thread Pool -- 44) JBAS013101: Activating Security Subsystem 14:10:36,735 INFO [org.jboss.as.naming] (MSC service thread 1-2) JBAS011802: Starting Naming Service 14:10:37,043 INFO [org.jboss.as.mail.extension] (MSC service thread 1-6) JBAS015400: Bound mail session [java:jboss/mail/Default] 14:10:37,208 INFO [org.jboss.as.connector] (MSC service thread 1-7) JBAS010408: Starting JCA Subsystem (JBoss IronJacamar 1.0.9.Final) 14:10:37,295 INFO [org.jboss.as.security] (MSC service thread 1-7) JBAS013100: Current PicketBox version=4.0.7.Final 14:10:37,740 INFO [org.jboss.as.connector.subsystems.datasources] (ServerService Thread Pool -- 27) JBAS010403: Deploying JDBC-compliant driver class org.h2.Driver (version 1.3) 14:10:38,792 INFO [org.jboss.ws.common.management.AbstractServerConfig] (MSC service thread 1-3) JBoss Web Services - Stack CXF Server 4.0.2.GA 14:10:38,833 INFO [org.apache.coyote.http11.Http11Protocol] (MSC service thread 1-2) Starting Coyote HTTP/1.1 on http-localhost-127.0.0.1-8080 14:10:39,534 INFO [org.jboss.as.server.deployment.scanner] (MSC service thread 1-1) JBAS015012: Started FileSystemDeploymentService for directory F:\work\softwares\Application Servers\JBoss\jboss-as-7.1.1.Final\jboss-as-7.1.1.Final\standalone\deployments 14:10:39,618 INFO [org.jboss.as.remoting] (MSC service thread 1-3) JBAS017100: Listening on localhost/127.0.0.1:4447 14:10:39,623 INFO [org.jboss.as.remoting] (MSC service thread 1-2) JBAS017100: Listening on /127.0.0.1:9999 14:10:39,698 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015014: Re-attempting failed deployment treasury.war 14:10:39,706 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found com.misl.treasury.ui.war in deployment directory. To trigger deployment create a file called com.misl.treasury.ui.war.dodeploy 14:10:40,105 INFO [org.jboss.as.connector.subsystems.datasources] (MSC service thread 1-2) JBAS010400: Bound data source [java:jboss/datasources/ExampleDS] 14:10:40,399 INFO [org.jboss.as.server.deployment] (MSC service thread 1-1) JBAS015876: Starting deployment of "com.misl.treasury.ui.war" 14:10:40,405 INFO [org.jboss.as.server.deployment] (MSC service thread 1-7) JBAS015876: Starting deployment of "treasury.war" 14:10:55,283 WARN [org.jboss.as.server.deployment] (MSC service thread 1-7) JBAS015893: Encountered invalid class name 'com.sun.faces.vendor.Tomcat6InjectionProvider:org.apache.catalina.util.DefaultAnnotationProcessor' for service type 'com.sun.faces.spi.injectionprovider' 14:10:55,289 WARN [org.jboss.as.server.deployment] (MSC service thread 1-7) JBAS015893: Encountered invalid class name 'com.sun.faces.vendor.Jetty6InjectionProvider:org.mortbay.jetty.plus.annotation.InjectionCollection' for service type 'com.sun.faces.spi.injectionprovider' 14:10:55,428 INFO [org.jboss.as.jpa] (MSC service thread 1-7) JBAS011401: Read persistence.xml for persistenceUnit 14:10:55,843 WARN [org.jboss.as.server.deployment] (MSC service thread 1-4) JBAS015893: Encountered invalid class name 'com.sun.faces.vendor.Tomcat6InjectionProvider:org.apache.catalina.util.DefaultAnnotationProcessor' for service type 'com.sun.faces.spi.injectionprovider' 14:10:55,849 WARN [org.jboss.as.server.deployment] (MSC service thread 1-4) JBAS015893: Encountered invalid class name 'com.sun.faces.vendor.Jetty6InjectionProvider:org.mortbay.jetty.plus.annotation.InjectionCollection' for service type 'com.sun.faces.spi.injectionprovider' 14:10:56,010 ERROR [org.jboss.msc.service.fail] (MSC service thread 1-2) MSC00001: Failed to start service jboss.deployment.unit."com.misl.treasury.ui.war".POST_MODULE: org.jboss.msc.service.StartException in service jboss.deployment.unit."com.misl.treasury.ui.war".POST_MODULE: Failed to process phase POST_MODULE of deployment "com.misl.treasury.ui.war" at org.jboss.as.server.deployment.DeploymentUnitPhaseService.start(DeploymentUnitPhaseService.java:119) [jboss-as-server-7.1.1.Final.jar:7.1.1.Final] at org.jboss.msc.service.ServiceControllerImpl$StartTask.startService(ServiceControllerImpl.java:1811) [jboss-msc-1.0.2.GA.jar:1.0.2.GA] at org.jboss.msc.service.ServiceControllerImpl$StartTask.run(ServiceControllerImpl.java:1746) [jboss-msc-1.0.2.GA.jar:1.0.2.GA] at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) [rt.jar:1.6.0_23] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) [rt.jar:1.6.0_23] at java.lang.Thread.run(Thread.java:662) [rt.jar:1.6.0_23] Caused by: java.lang.NoClassDefFoundError: javax/servlet/ServletOutputStream at java.lang.Class.getDeclaredConstructors0(Native Method) [rt.jar:1.6.0_23] at java.lang.Class.privateGetDeclaredConstructors(Class.java:2389) [rt.jar:1.6.0_23] at java.lang.Class.getConstructor0(Class.java:2699) [rt.jar:1.6.0_23] at java.lang.Class.getConstructor(Class.java:1657) [rt.jar:1.6.0_23] at org.jboss.as.web.deployment.jsf.JsfManagedBeanProcessor.deploy(JsfManagedBeanProcessor.java:108) at org.jboss.as.server.deployment.DeploymentUnitPhaseService.start(DeploymentUnitPhaseService.java:113) [jboss-as-server-7.1.1.Final.jar:7.1.1.Final] ... 5 more Caused by: java.lang.ClassNotFoundException: javax.servlet.ServletOutputStream from [Module "deployment.com.misl.treasury.ui.war:main" from Service Module Loader] at org.jboss.modules.ModuleClassLoader.findClass(ModuleClassLoader.java:190) at org.jboss.modules.ConcurrentClassLoader.performLoadClassUnchecked(ConcurrentClassLoader.java:468) at org.jboss.modules.ConcurrentClassLoader.performLoadClassChecked(ConcurrentClassLoader.java:456) at org.jboss.modules.ConcurrentClassLoader.performLoadClassChecked(ConcurrentClassLoader.java:423) at org.jboss.modules.ConcurrentClassLoader.performLoadClass(ConcurrentClassLoader.java:398) at org.jboss.modules.ConcurrentClassLoader.loadClass(ConcurrentClassLoader.java:120) ... 11 more 14:10:56,628 ERROR [org.jboss.msc.service.fail] (MSC service thread 1-4) MSC00001: Failed to start service jboss.deployment.unit."treasury.war".PARSE: org.jboss.msc.service.StartException in service jboss.deployment.unit."treasury.war".PARSE: Failed to process phase PARSE of deployment "treasury.war" at org.jboss.as.server.deployment.DeploymentUnitPhaseService.start(DeploymentUnitPhaseService.java:119) [jboss-as-server-7.1.1.Final.jar:7.1.1.Final] at org.jboss.msc.service.ServiceControllerImpl$StartTask.startService(ServiceControllerImpl.java:1811) [jboss-msc-1.0.2.GA.jar:1.0.2.GA] at org.jboss.msc.service.ServiceControllerImpl$StartTask.run(ServiceControllerImpl.java:1746) [jboss-msc-1.0.2.GA.jar:1.0.2.GA] at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) [rt.jar:1.6.0_23] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) [rt.jar:1.6.0_23] at java.lang.Thread.run(Thread.java:662) [rt.jar:1.6.0_23] Caused by: org.jboss.as.server.deployment.DeploymentUnitProcessingException: SAXException parsing vfs:/F:/work/softwares/Application Servers/JBoss/jboss-as-7.1.1.Final/jboss-as-7.1.1.Final/bin/content/treasury.war/WEB-INF/beans.xml at org.jboss.as.weld.deployment.BeansXmlParser.parse(BeansXmlParser.java:100) at org.jboss.as.weld.deployment.processors.BeansXmlProcessor.parseBeansXml(BeansXmlProcessor.java:133) at org.jboss.as.weld.deployment.processors.BeansXmlProcessor.deploy(BeansXmlProcessor.java:97) at org.jboss.as.server.deployment.DeploymentUnitPhaseService.start(DeploymentUnitPhaseService.java:113) [jboss-as-server-7.1.1.Final.jar:7.1.1.Final] ... 5 more Caused by: org.xml.sax.SAXParseException: Premature end of file. at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:196) at org.apache.xerces.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:175) at org.apache.xerces.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:394) at org.apache.xerces.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:322) at org.apache.xerces.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:281) at org.apache.xerces.impl.XMLScanner.reportFatalError(XMLScanner.java:1459) at org.apache.xerces.impl.XMLDocumentScannerImpl$PrologDispatcher.dispatch(XMLDocumentScannerImpl.java:903) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:324) at org.apache.xerces.parsers.XML11Configuration.parse(XML11Configuration.java:845) at org.apache.xerces.parsers.XML11Configuration.parse(XML11Configuration.java:768) at org.apache.xerces.parsers.XMLParser.parse(XMLParser.java:108) at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1196) at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:555) at org.apache.xerces.jaxp.SAXParserImpl.parse(SAXParserImpl.java:289) at org.jboss.as.weld.deployment.BeansXmlParser.parse(BeansXmlParser.java:94) ... 8 more 14:10:56,670 INFO [org.jboss.as] (MSC service thread 1-1) JBAS015951: Admin console listening on http://127.0.0.1:9990 14:10:56,672 ERROR [org.jboss.as] (MSC service thread 1-1) JBAS015875: JBoss AS 7.1.1.Final "Brontes" started (with errors) in 25527ms - Started 143 of 222 services (2 services failed or missing dependencies, 76 services are passive or on-demand) 14:10:56,671 INFO [org.jboss.as.server] (DeploymentScanner-threads - 2) JBAS015871: Deploy of deployment "treasury.war" was rolled back with no failure message 14:10:56,679 INFO [org.jboss.as.server] (DeploymentScanner-threads - 2) JBAS015870: Deploy of deployment "com.misl.treasury.ui.war" was rolled back with failure message {"JBAS014671: Failed services" => {"jboss.deployment.unit.\"com.misl.treasury.ui.war\".POST_MODULE" => "org.jboss.msc.service.StartException in service jboss.deployment.unit.\"com.misl.treasury.ui.war\".POST_MODULE: Failed to process phase POST_MODULE of deployment \"com.misl.treasury.ui.war\""}} 14:10:56,851 INFO [org.jboss.as.server.deployment] (MSC service thread 1-8) JBAS015877: Stopped deployment com.misl.treasury.ui.war in 172ms 14:10:57,068 INFO [org.jboss.as.server.deployment] (MSC service thread 1-7) JBAS015877: Stopped deployment treasury.war in 395ms 14:10:57,070 INFO [org.jboss.as.controller] (DeploymentScanner-threads - 2) JBAS014774: Service status report JBAS014777: Services which failed to start: service jboss.deployment.unit."treasury.war".PARSE: org.jboss.msc.service.StartException in service jboss.deployment.unit."treasury.war".PARSE: Failed to process phase PARSE of deployment "treasury.war" service jboss.deployment.unit."com.misl.treasury.ui.war".POST_MODULE: org.jboss.msc.service.StartException in service jboss.deployment.unit."com.misl.treasury.ui.war".POST_MODULE: Failed to process phase POST_MODULE of deployment "com.misl.treasury.ui.war" 14:10:57,079 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {"JBAS014653: Composite operation failed and was rolled back. Steps that failed:" => {"Operation step-2" => {"JBAS014671: Failed services" => {"jboss.deployment.unit.\"com.misl.treasury.ui.war\".POST_MODULE" => "org.jboss.msc.service.StartException in service jboss.deployment.unit.\"com.misl.treasury.ui.war\".POST_MODULE: Failed to process phase POST_MODULE of deployment \"com.misl.treasury.ui.war\""}}}} 14:10:57,087 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS014654: Composite operation was rolled back And by the way, JBOSS_HOME\modules\javax\api\main folder only contains a module.xml, no jars. Tried to add jboss-servlet-api_3.0_spec-1.0.0.Final.jar file in that directory and updated module.xml too. But, it shows a very long trail of stacktraces :) I have even removed beans.xml. No change. I have never tried JBoss before. Any help would be highly appreciated.

    Read the article

  • Jaxb2Marshaller and primitive types

    - by Thomas Einwaller
    Is it possible to create a web service operation using primitive or basic Java types when using the Jaxb2Marschaller in spring-ws? For example a method looking like this: @Override @PayloadRoot(localPart = "AddTaskRequest", namespace = "http://example.com/examplews/") public long addTask(final Task task) throws AddTaskFault { // do something return 0; } I am using the maven jaxws plugin to generate the interface and model classes from my WSDL. When I try to call the webservice I get the following error: java.lang.IllegalStateException: No adapter for endpoint [...]: Does your endpoint implement a supported interface like MessageHandler or PayloadEndpoint I found out that if I change the method to that: @Override @PayloadRoot(localPart = "AddTaskRequest", namespace = "http://example.com/examplews/") public JAXBElement<Long> addTask(final JAXBElement<Task> task) throws AddTaskFault { final ObjectFactory objectFactory = new ObjectFactory(); return objectFactory.createAddTaskResponse(0L); } I am able to call it - but this signature is not compatible with the interface generated by the maven jaxws plugin. What can I do to configure either spring-ws to be able to use the first kind of implementation or to tell maven jaxws plugin to generate the second variant of the interface? UPDATE: My relevant spring-ws config entries look like that: <bean id="marshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller"> <property name="contextPath" value="com.example.examplews" /> </bean> <bean class="org.springframework.ws.server.endpoint.adapter.GenericMarshallingMethodEndpointAdapter"> <constructor-arg ref="marshaller" /> </bean> <bean class="org.springframework.ws.server.endpoint.mapping.PayloadRootAnnotationMethodEndpointMapping"> <property name="order" value="1" /> </bean>

    Read the article

  • Trying to run WCF web service on non-domain VM, Security Errors

    - by NealWalters
    Am I in a Catch-22 situation here? My goal is to take a WCF service that I inherited, and run it on a VM and test it by calling it from my desktop PC. The VM is in a workgroup, and not in the company's domain. Basically, we need more test environments, ideally one per developer (we may have 2 to 4 people that need this). Thus the idea of the VM was that each developer could have his own web server that somewhat matches or real environment (where we actually have two websites, an external/exposed and internal). [Using VS2010 .NET 4.0] In the internal service, each method was decorated with this attribute: [OperationBehavior(Impersonation = ImpersonationOption.Required)] I'm still researching why this was needed. I think it's because a webapp calls the "internal" service, and either a) we need the credentials of the user, or b) we may doing some PrinciplePermission.Demands to see if the user is in a group. My interest is creating some ConsoleTest programs or UnitTest programs. I changed to allowed like this: [OperationBehavior(Impersonation = ImpersonationOption.Allowed)] because I was getting this error in trying to view the .svc in the browser: The contract operation 'EditAccountFamily' requires Windows identity for automatic impersonation. A Windows identity that represents the caller is not provided by binding ('WSHttpBinding','http://tempuri.org/') for contract ('IAdminService','http://tempuri.org/'. I don't get that error with the original bindings look like this: However, I believe I need to turn off this security since the web service is not on the domain. I tend to get these errors in the client: 1) The request for security token could not be satisfied because authentication failed - as an InnerException of "SecurityNegotiation was unhandled". or 2) The caller was not authenticated by the service as an InnerException of "SecurityNegotiation was unhandled". So can I create some configuration of code and web.config that will allow each developer to work on his own VM? Or must I join the VM to the domain? The number of permutations seems near endless. I've started to create a Word.doc that says what to do with each error, but now I'm in the catch-22 where I'm stuck. Thanks, Neal Server Bindings: <bindings> <wsHttpBinding> <binding name="wsHttpEndpointBinding" maxBufferPoolSize="2147483647" maxReceivedMessageSize="500000000"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <!-- <security mode="None" /> This is one thing I tried --> <security> <message clientCredentialType="Windows" /> </security> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="ABC.AdminService.AdminServiceBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true" /> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceCredentials> </serviceCredentials> <!--<serviceAuthorization principalPermissionMode="UseAspNetRoles" roleProviderName="AspNetWindowsTokenRoleProvider"/>--> <serviceAuthorization principalPermissionMode="UseWindowsGroups" impersonateCallerForAllOperations="true" /> </behavior> <behavior name="ABC.AdminService.IAdminServiceTransportBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true" /> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false" /> <serviceCredentials> <clientCertificate> <authentication certificateValidationMode="PeerTrust" /> </clientCertificate> <serviceCertificate findValue="WCfServer" storeLocation="LocalMachine" storeName="My" x509FindType="FindBySubjectName" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> CLIENT: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://192.168.159.132/EC_AdminService/AdminService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService" name="WSHttpBinding_IAdminService"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> </system.serviceModel>

    Read the article

  • WCF with No security

    - by james.ingham
    Hi all, I've got a WCF service setup which I can consume and use as intendid... but only on the same machine. I'm looking to get this working over multiple computers and I'm not fussed about the security. However when I set (client side) the security to = none, I get a InvalidOperationException: The service certificate is not provided for target 'http://xxx.xxx.xxx.xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/'. Specify a service certificate in ClientCredentials. So I'm left with: <security mode="Message"> <message clientCredentialType="None" negotiateServiceCredential="false" algorithmSuite="Default" /> </security> But this gives me another InvalidOperationException: The service certificate is not provided for target 'http://xxx.xxx.xxx.xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/'. Specify a service certificate in ClientCredentials. Why would I have to provide a certificate if security was turned off? Server app config: <system.serviceModel> <services> <service name="Server.WcfServiceLibrary.CheckoutService" behaviorConfiguration="Server.WcfServiceLibrary.CheckoutServiceBehavior"> <host> <baseAddresses> <add baseAddress = "http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/CheckoutService/" /> </baseAddresses> </host> <endpoint address ="" binding="wsDualHttpBinding" contract="Server.WcfServiceLibrary.ICheckoutService"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> <service name="Server.WcfServiceLibrary.ManagementService" behaviorConfiguration="Server.WcfServiceLibrary.ManagementServiceBehavior"> <host> <baseAddresses> <add baseAddress = "http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/" /> </baseAddresses> </host> <endpoint address ="" binding="wsDualHttpBinding" contract="Server.WcfServiceLibrary.IManagementService"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="Server.WcfServiceLibrary.CheckoutServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False" /> <serviceThrottling maxConcurrentCalls="100" maxConcurrentSessions="50" maxConcurrentInstances="50" /> </behavior> <behavior name="Server.WcfServiceLibrary.ManagementServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> Client app config: <system.serviceModel> <bindings> <wsDualHttpBinding> <binding name="WSDualHttpBinding_IManagementService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:00:10" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" /> <security mode="Message"> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" /> </security> </binding> </wsDualHttpBinding> </bindings> <client> <endpoint address="http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/" binding="wsDualHttpBinding" bindingConfiguration="WSDualHttpBinding_IManagementService" contract="ServiceReference.IManagementService" name="WSDualHttpBinding_IManagementService"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> </system.serviceModel> Thanks

    Read the article

  • Spring - PropertiesPlaceholderConfigurer not finding properties file

    - by sat
    Not sure what could be wrong. I had an app that worked all along with this <context:property-placeholder location="classpath:my.properties"/> No problems finding the properties file and hooking things up. Now, I needed to encrypt some fields in the properties file. So I ended up writing the custom PropertiesPlaceholderConfigurer and tried to wire it up like this <bean class="com.mycompany.myapp.PropertiesPlaceholderConfigurer"> <property name="location" value="classpath:my.propeties"/> </bean> With this configuration, Spring complains that it cannot find the properties file. java.io.FileNotFoundException: class path resource [my.propeties] cannot be opened because it does not exist What in addition should be done? The custom placeholder configurer package com.mycompany.myapp; import org.springframework.beans.factory.config.PropertyPlaceholderConfigurer; import org.springframework.util.ObjectUtils; import java.util.Enumeration; import java.util.Properties; public class PropertiesPlaceholderConfigurer extends PropertyPlaceholderConfigurer{ @Override protected void convertProperties(Properties props) { Enumeration<?> propertyNames = props.propertyNames(); while (propertyNames.hasMoreElements()) { String propertyName = (String) propertyNames.nextElement(); String propertyValue = props.getProperty(propertyName); if(propertyName.endsWith("encrypted")){ System.out.println("Decrypting the property " + propertyName); String convertedValue = decrypt(propertyValue); System.out.println("Decrypted the property value to " + convertedValue); if (!ObjectUtils.nullSafeEquals(propertyValue, convertedValue)) { props.setProperty(propertyName, convertedValue); } } } } } Update: Forget my custom placeholder configurer, even the spring provided one has trouble if I replace with this <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"> <property name="location" value="classpath:my.propeties"/> </bean> What is context:property-placholder doing that the bean definition can't? Full stack trace java.lang.IllegalStateException: Failed to load ApplicationContext at org.springframework.test.context.CacheAwareContextLoaderDelegate.loadContext(CacheAwareContextLoaderDelegate.java:99) at org.springframework.test.context.DefaultTestContext.getApplicationContext(DefaultTestContext.java:101) at org.springframework.test.context.support.DependencyInjectionTestExecutionListener.injectDependencies(DependencyInjectionTestExecutionListener.java:109) at org.springframework.test.context.support.DependencyInjectionTestExecutionListener.prepareTestInstance(DependencyInjectionTestExecutionListener.java:75) at org.springframework.test.context.TestContextManager.prepareTestInstance(TestContextManager.java:319) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.createTest(SpringJUnit4ClassRunner.java:212) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner$1.runReflectiveCall(SpringJUnit4ClassRunner.java:289) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.methodBlock(SpringJUnit4ClassRunner.java:291) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:232) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:89) at org.junit.runners.ParentRunner$3.run(ParentRunner.java:238) at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:63) at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:236) at org.junit.runners.ParentRunner.access$000(ParentRunner.java:53) at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:229) at org.springframework.test.context.junit4.statements.RunBeforeTestClassCallbacks.evaluate(RunBeforeTestClassCallbacks.java:61) at org.springframework.test.context.junit4.statements.RunAfterTestClassCallbacks.evaluate(RunAfterTestClassCallbacks.java:71) at org.junit.runners.ParentRunner.run(ParentRunner.java:309) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.run(SpringJUnit4ClassRunner.java:175) at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264) at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153) at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124) at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200) at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153) at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103) Caused by: org.springframework.beans.factory.BeanInitializationException: Could not load properties; nested exception is java.io.FileNotFoundException: class path resource [my.propeties] cannot be opened because it does not exist at org.springframework.beans.factory.config.PropertyResourceConfigurer.postProcessBeanFactory(PropertyResourceConfigurer.java:89) at org.springframework.context.support.PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(PostProcessorRegistrationDelegate.java:265) at org.springframework.context.support.PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(PostProcessorRegistrationDelegate.java:162) at org.springframework.context.support.AbstractApplicationContext.invokeBeanFactoryPostProcessors(AbstractApplicationContext.java:609) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464) at org.springframework.test.context.support.AbstractGenericContextLoader.loadContext(AbstractGenericContextLoader.java:121) at org.springframework.test.context.support.AbstractGenericContextLoader.loadContext(AbstractGenericContextLoader.java:60) at org.springframework.test.context.support.AbstractDelegatingSmartContextLoader.delegateLoading(AbstractDelegatingSmartContextLoader.java:100) at org.springframework.test.context.support.AbstractDelegatingSmartContextLoader.loadContext(AbstractDelegatingSmartContextLoader.java:250) at org.springframework.test.context.CacheAwareContextLoaderDelegate.loadContextInternal(CacheAwareContextLoaderDelegate.java:64) at org.springframework.test.context.CacheAwareContextLoaderDelegate.loadContext(CacheAwareContextLoaderDelegate.java:91) at org.springframework.test.context.DefaultTestContext.getApplicationContext(DefaultTestContext.java:101) at org.springframework.test.context.support.DependencyInjectionTestExecutionListener.injectDependencies(DependencyInjectionTestExecutionListener.java:109) at org.springframework.test.context.support.DependencyInjectionTestExecutionListener.prepareTestInstance(DependencyInjectionTestExecutionListener.java:75) at org.springframework.test.context.TestContextManager.prepareTestInstance(TestContextManager.java:319) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.createTest(SpringJUnit4ClassRunner.java:212) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner$1.runReflectiveCall(SpringJUnit4ClassRunner.java:289) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.methodBlock(SpringJUnit4ClassRunner.java:291) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:232) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:89) at org.junit.runners.ParentRunner$3.run(ParentRunner.java:238) at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:63) at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:236) at org.junit.runners.ParentRunner.access$000(ParentRunner.java:53) at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:229) at org.springframework.test.context.junit4.statements.RunBeforeTestClassCallbacks.evaluate(RunBeforeTestClassCallbacks.java:61) at org.springframework.test.context.junit4.statements.RunAfterTestClassCallbacks.evaluate(RunAfterTestClassCallbacks.java:71) at org.junit.runners.ParentRunner.run(ParentRunner.java:309) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.run(SpringJUnit4ClassRunner.java:175) at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264) at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153) at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124) at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200) at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153) at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103) Caused by: java.io.FileNotFoundException: class path resource [my.propeties] cannot be opened because it does not exist at org.springframework.core.io.ClassPathResource.getInputStream(ClassPathResource.java:158) at org.springframework.core.io.support.EncodedResource.getInputStream(EncodedResource.java:143) at org.springframework.core.io.support.PropertiesLoaderUtils.fillProperties(PropertiesLoaderUtils.java:98) at org.springframework.core.io.support.PropertiesLoaderSupport.loadProperties(PropertiesLoaderSupport.java:175) at org.springframework.core.io.support.PropertiesLoaderSupport.mergeProperties(PropertiesLoaderSupport.java:156) at org.springframework.beans.factory.config.PropertyResourceConfigurer.postProcessBeanFactory(PropertyResourceConfigurer.java:80) at org.springframework.context.support.PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(PostProcessorRegistrationDelegate.java:265) at org.springframework.context.support.PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(PostProcessorRegistrationDelegate.java:162) at org.springframework.context.support.AbstractApplicationContext.invokeBeanFactoryPostProcessors(AbstractApplicationContext.java:609) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464) at org.springframework.test.context.support.AbstractGenericContextLoader.loadContext(AbstractGenericContextLoader.java:121) at org.springframework.test.context.support.AbstractGenericContextLoader.loadContext(AbstractGenericContextLoader.java:60) at org.springframework.test.context.support.AbstractDelegatingSmartContextLoader.delegateLoading(AbstractDelegatingSmartContextLoader.java:100) at org.springframework.test.context.support.AbstractDelegatingSmartContextLoader.loadContext(AbstractDelegatingSmartContextLoader.java:250) at org.springframework.test.context.CacheAwareContextLoaderDelegate.loadContextInternal(CacheAwareContextLoaderDelegate.java:64) at org.springframework.test.context.CacheAwareContextLoaderDelegate.loadContext(CacheAwareContextLoaderDelegate.java:91) at org.springframework.test.context.DefaultTestContext.getApplicationContext(DefaultTestContext.java:101) at org.springframework.test.context.support.DependencyInjectionTestExecutionListener.injectDependencies(DependencyInjectionTestExecutionListener.java:109) at org.springframework.test.context.support.DependencyInjectionTestExecutionListener.prepareTestInstance(DependencyInjectionTestExecutionListener.java:75) at org.springframework.test.context.TestContextManager.prepareTestInstance(TestContextManager.java:319) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.createTest(SpringJUnit4ClassRunner.java:212) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner$1.runReflectiveCall(SpringJUnit4ClassRunner.java:289) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.methodBlock(SpringJUnit4ClassRunner.java:291) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:232) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.runChild(SpringJUnit4ClassRunner.java:89) at org.junit.runners.ParentRunner$3.run(ParentRunner.java:238) at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:63) at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:236) at org.junit.runners.ParentRunner.access$000(ParentRunner.java:53) at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:229) at org.springframework.test.context.junit4.statements.RunBeforeTestClassCallbacks.evaluate(RunBeforeTestClassCallbacks.java:61) at org.springframework.test.context.junit4.statements.RunAfterTestClassCallbacks.evaluate(RunAfterTestClassCallbacks.java:71) at org.junit.runners.ParentRunner.run(ParentRunner.java:309) at org.springframework.test.context.junit4.SpringJUnit4ClassRunner.run(SpringJUnit4ClassRunner.java:175) at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:264) at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:153) at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:124) at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:200) at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:153) at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:103)

    Read the article

  • How to hold a queue of messages and have a group of working threads without polling?

    - by Mark
    I have a workflow that I want to looks something like this: / Worker 1 \ =Request Channel= - [Holding Queue|||] - Worker 2 - =Response Channel= \ Worker 3 / That is: Requests come in and they enter a FIFO queue Identical workers then pick up tasks from the queue At any given time any worker may work only one task When a worker is free and the holding queue is non-empty the worker should immediately pick up another task When tasks are complete, a worker places the result on the Response Channel I know there are QueueChannels in Spring Integration, but these channels require polling (which seems suboptimal). In particular, if a worker can be busy, I'd like the worker to be busy. Also, I've considered avoiding the queue altogether and simply letting tasks round-robin to all workers, but it's preferable to have a single waiting line as some tasks may be accomplished faster than others. Furthermore, I'd like insight into how many jobs are remaining (which I can get from the queue) and the ability to cancel all or particular jobs. How can I implement this message queuing/work distribution pattern while avoiding a polling? Edit: It appears I'm looking for the Message Dispatcher pattern -- how can I implement this using Spring/Spring Integration?

    Read the article

  • Spring security or BCrypt algorithm which one is good for accounts like project?

    - by Ranjith Kumar Nethaji
    I am using spring security for hashing my password.And is it safe ,because am using spring security for first time. my code here <security:http auto-config="true"> <security:intercept-url pattern="/welcome*" access="ROLE_USER" /> <security:form-login login-page="/login" default-target-url="/welcome" authentication-failure-url="/loginfailed" /> <security:logout logout-success-url="/logout" /> </security:http> authentication-failure-url="/loginfailed" /> <security:logout logout-success-url="/logout" /> </security:http> <authentication-manager> <authentication-provider> <password-encoder hash="sha" /> <user-service> <user name="k" password="7c4a8d09ca3762af61e59520943dc26494f8941b" authorities="ROLE_USER" /> </user-service> </authentication-provider> </authentication-manager> .And I havnt used bcrypt algorithm.what is your feedback for both?any recommendation?

    Read the article

  • Data Source Security Part 1

    - by Steve Felts
    I’ve written a couple of articles on how to store data source security credentials using the Oracle wallet.  I plan to write a few articles on the various types of security available to WebLogic Server (WLS) data sources.  There are more options than you might think! There have been several enhancements in this area in WLS 10.3.6.  There are a couple of more enhancements planned for release WLS 12.1.2 that I will include here for completeness.  This isn’t intended as a teaser.  If you call your Oracle support person, you can get them now as minor patches to WLS 10.3.6.   The current security documentation is scattered in a few places, has a few incorrect statements, and is missing a few topics.  It also seems that the knowledge of how to apply some of these features isn’t written down.  The goal of these articles is to talk about WLS data source security in a unified way and to introduce some approaches to using the available features.  Introduction to WebLogic Data Source Security Options By default, you define a single database user and password for a data source.  You can store it in the data source descriptor or make use of the Oracle wallet.  This is a very simple and efficient approach to security.  All of the connections in the connection pool are owned by this user and there is no special processing when a connection is given out.  That is, it’s a homogeneous connection pool and any request can get any connection from a security perspective (there are other aspects like affinity).  Regardless of the end user of the application, all connections in the pool use the same security credentials to access the DBMS.   No additional information is needed when you get a connection because it’s all available from the data source descriptor (or wallet). java.sql.Connection conn =  mydatasource.getConnection(); Note: You can enter the password as a name-value pair in the Properties field (this not permitted for production environments) or you can enter it in the Password field of the data source descriptor. The value in the Password field overrides any password value defined in the Properties passed to the JDBC Driver when creating physical database connections. It is recommended that you use the Password attribute in place of the password property in the properties string because the Password value is encrypted in the configuration file (stored as the password-encrypted attribute in the jdbc-driver-params tag in the module file) and is hidden in the administration console.  The Properties and Password fields are located on the administration console Data Source creation wizard or Data Source Configuration tab. The JDBC API can also be used to programmatically specify a database user name and password as in the following.  java.sql.Connection conn = mydatasource.getConnection(“user”, “password”); According to the JDBC specification, it’s supposed to take a database user and associated password but different vendors implement this differently.  WLS, by default, treats this as an application server user and password.  The pair is authenticated to see if it’s a valid user and that user is used for WLS security permission checks.  By default, the user is then mapped to a database user and password using the data source credential mapper, so this API sort of follows the specification but database credentials are one-step removed from the application code.  More details and the rationale are described later. While the default approach is simple, it does mean that only one database user is doing all of the work.  You can’t figure out who actually did the update and you can’t restrict SQL operations by who is running the operation, at least at the database level.   Any type of per-user logic will need to be in the application code instead of having the database do it.  There are various WLS data source features that can be configured to provide some per-user information about the operations to the database. WebLogic Data Source Security Options This table describes the features available for WebLogic data sources to configure database security credentials and a brief description.  It also captures information about the compatibility of these features with one another. Feature Description Can be used with Can’t be used with User authentication (default) Default getConnection(user, password) behavior – validate the input and use the user/password in the descriptor. Set client identifier Proxy Session, Identity pooling, Use database credentials Use database credentials Instead of using the credential mapper, use the supplied user and password directly. Set client identifier, Proxy session, Identity pooling User authentication, Multi Data Source Set Client Identifier Set a client identifier property associated with the connection (Oracle and DB2 only). Everything Proxy Session Set a light-weight proxy user associated with the connection (Oracle-only). Set client identifier, Use database credentials Identity pooling, User authentication Identity pooling Heterogeneous pool of connections owned by specified users. Set client identifier, Use database credentials Proxy session, User authentication, Labeling, Multi-datasource, Active GridLink Note that all of these features are available with both XA and non-XA drivers. Currently, the Proxy Session and Use Database Credentials options are on the Oracle tab of the Data Source Configuration tab of the administration console (even though the Use Database Credentials feature is not just for Oracle databases – oops).  The rest of the features are on the Identity tab of the Data Source Configuration tab in the administration console (plan on seeing them all in one place in the future). The subsequent articles will describe these features in more detail.  Keep referring back to this table to see the big picture.

    Read the article

  • where can i get the spring framework 3.0 distribution?

    - by mlo55
    has anyone been able to download the spring framework 3.0.0.M4 release from the spring source site... (or can you provide an alternative download page)? http://www.springsource.org/download am I missing something..., the site is giving me the runaround... when i get to the "Spring Community Downloads" page and choose spring from the LHS menu... I get no download link... ta in advance...

    Read the article

  • What features EJB3 bring and also how does EJB3 stack up with Spring Framework ?

    - by Rachel
    I have never worked on ejb, when I started programming Spring was already arrived and all my projects have been with Spring only, recently I had one interview and they wanted knowledge of EJB3.0 and so I want to know how does EJB3.0 stack up with Spring Framework and why many projects now a day are with Spring Framework and not with EJB3.0, do not quote me here as I can be wrong I would really appreciate if difference and benefits of using one over another could be explained from practical perspective.

    Read the article

  • How to populate Java (web) application with initial data using Spring/JPA/Hibernate

    - by Tuukka Mustonen
    I want to setup my database with initial data programmatically. I want to populate my database for development runs, not for testing runs (it's easy). The product is built on top of Spring and JPA/Hibernate. Developer checks out the project Developer runs command/script to setup database with initial data Developer starts application (server) and begins developing/testing then: Developer runs command/script to flush the database and set it up with new initial data because database structures or the initial data bundle were changed What I want is to setup my environment by required parts in order to call my DAOs and insert new objects into database. I do not want to create initial data sets in raw SQL, XML, take dumps of database or whatever. I want to programmatically create objects and persist them in database as I would in normal application logic. One way to accomplish this would be to start up my application normally and run a special servlet that does the initialization. But is that really the way to go? I would love to execute the initial data setup as Maven task and I don't know how to do that if I take the servlet approach. There is somewhat similar question. I took a quick glance at the suggested DBUnit and Unitils. But they seem to be heavily focused in setting up testing environments, which is not what I want here. DBUnit does initial data population, but only using xml/csv fixtures, which is not what I'm after here. Then, Maven has SQL plugin, but I don't want to handle raw SQL. Maven also has Hibernate plugin, but it seems to help only in Hibernate configuration and table schema creation (not in populating db with data). How to do this?

    Read the article

  • How to let Tomcat publish WSDL for the WS it provides (CXF 2.2, Spring 3, Tomcat6)

    - by Zwei Steinen
    Hi, I am trying to implement a simple web service provider using Tomcat6, CXF 2.2, Spring 3, and actually the service itself runs fine (I can call web methods using the original WSDL and SoapUI). However, Tomcat returns a blank page on "?wsdl" requests. Also, when I try to manipulate the (would-be) published WSDL by adding a publishedEndpointURL property to the jaxws:endpoint element, Tomcat will issue a XML parse exception (something like property publishedEndpointURL is not allowed in element jaxws:endpoint) <jaxws:endpoint id="service" implementor="org.sample.ServiceImpl" implementorClass="org.sample.ServiceImpl" address="/service" publishedEndpointURL="http://localhost:8080/MyService/service"> I used "contract first" style. EDIT: What I did so far: Setup tomcat6 with Spring3 Generate CXF implementation class by using maven Provide web.xml (only relevant part shown) <listener> <listener-class>org.springframework.web.context.ContextLoaderListener </listener-class> </listener> <servlet> <servlet-name>cxf</servlet-name> <servlet-class> org.apache.cxf.transport.servlet.CXFServlet </servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>cxf</servlet-name> <url-pattern>/*</url-pattern> </servlet-mapping> Provide applicationContext.xml (only relevant part is shown) Package generated stuff into war and deploy

    Read the article

  • Problem with Remember Me Service in Spring Security

    - by Gearóid
    Hi, I'm trying to implement a "remember me" functionality in my website using Spring. The cookie and entry in the persistent_logins table are getting created correctly. Additionally, I can see that the correct user is being restored as the username is displayed at the top of the page. However, once I try to access any information for this user when they return after they were "remembered", I get a NullPointerException. It looks as though the user isn't being set in the session again. My applicationContext-security.xml contains the following: <remember-me data-source-ref="dataSource" user-service-ref="userService"/> ... <authentication-provider user-service-ref="userService" /> <jdbc-user-service id="userService" data-source-ref="dataSource" role-prefix="ROLE_" users-by-username-query="select email as username, password, 1 as ENABLED from user where email=?" authorities-by-username-query="select user.id as id, upper(role.name) as authority from user, role, users_roles where users_roles.user_fk=id and users_roles.role_fk=role.name and user.email=?"/> I thought it may have had something to do with users-by-username query but surely login wouldn't work correctly if this query was incorrect? Any help on this would be greatly appreciated. Thanks, gearoid.

    Read the article

  • Lazy-loading with Spring HibernateDaoSupport ?

    - by umanga
    Greetings I am developing a non-webapplication using Spring+Hibernate. My question is how the HibernateDaoSupport handles lazy-loading , because after a call do DAO , the Session is closed. Take a look at following psuedo-code: DAO is like: CommonDao extends HibernateDaoSupport{ Family getFamilyById(String id); SubFamily getSubFamily(String familyid,String subfamilyid); } Domain model is like: Family{ private List<SubFamily> subfamiles; public List<SubFamily> getSubFamiles(); } SubFamily{ private Family family; public Family getFamily(); } In the application I get DAO from app-context and want to following operations.Is this possible to do with lazy-loading because AFAIK after every method (getFamilyById() , getSubFamily() ) the session is closed. CommonDAO dao=//get bean from application context; Family famA=dao.getFamilyById(familyid); // //Do some stuff List<SubFamily> childrenA=fam.getSubFamiles(); SubFamily asubfamily=dao.getSubFamily(id,subfamilyid); // //Do some other stuff Family famB=asubfamily.getFamily();

    Read the article

  • Spring scheduler shutdown error

    - by Alex
    During development a SPRING based scheduler in a tomcat container, I always get this logoutput at undeploy webapp or shutdown server: Apr 28, 2010 4:21:33 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina Apr 28, 2010 4:21:33 PM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: A web application appears to have started a thread named [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-1] but has failed to stop it. This is very likely to create a memory leak. Apr 28, 2010 4:21:33 PM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: A web application appears to have started a thread named [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-2] but has failed to stop it. This is very likely to create a memory leak. Apr 28, 2010 4:21:33 PM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: A web application appears to have started a thread named [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-3] but has failed to stop it. This is very likely to create a memory leak. Apr 28, 2010 4:21:33 PM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: A web application appears to have started a thread named [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-4] but has failed to stop it. This is very likely to create a memory leak. Apr 28, 2010 4:21:33 PM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: A web application appears to have started a thread named [org.springframework.scheduling.quartz.SchedulerFactoryBean#0_Worker-5] but has failed to stop it. This is very likely to create a memory leak. . . . SEVERE: A web application created a ThreadLocal with key of type [org.springframework.core.NamedThreadLocal] (value [Prototype beans currently in creation]) and a value of type [null] (value [null]) but failed to remove it when the web application was stopped. To prevent a memory leak, the ThreadLocal has been forcibly removed. Apr 28, 2010 4:21:34 PM org.apache.coyote.http11.Http11Protocol destroy INFO: Stopping Coyote HTTP/1.1 on http-8606 How can I fix this?

    Read the article

  • Spring MVC parameter validation

    - by Don
    Hi, I've defined a controller, validator and command class for a Spring 2.5 MVC application like this: public class ResourceController extends AbstractCommandController { private MessageRetriever messageRetriever; protected ModelAndView handle(HttpServletRequest request, HttpServletResponse response, Object command, BindException errors) throws Exception { ResourceCommand resourceCommand = (ResourceCommand) command; // I NEED TO CHECK HERE IF COMMAND IS VALID? } public static class ResourceCommand { private String module; private String site; private String lang; // GETTERS AND SETTERS OMITTED } public static class ResourceValidator implements Validator { public boolean supports(Class clazz) { return ResourceCommand.class.isAssignableFrom(clazz); } public void validate(Object obj, Errors errors) { ValidationUtils.rejectIfEmptyOrWhitespace(errors, "module", "MODULE_REQUIRED"); ValidationUtils.rejectIfEmptyOrWhitespace(errors, "site", "SITE_REQUIRED"); ValidationUtils.rejectIfEmptyOrWhitespace(errors, "lang", "LANG_REQUIRED"); } } } I have wired these all together in the application context: <bean id="resourceController" class="com.amadeus.jcp.ui.framework.localization.ResourceController"> <property name="commandClass" value="com.amadeus.jcp.ui.framework.localization.ResourceController.ResourceCommand"/> <property name="validator"> <bean class="com.amadeus.jcp.ui.framework.localization.ResourceController.ResourceValidator"/> </property> </bean> However, I can't figure out how to actually check whether the command is valid or not - I assume the framework calls the validator, but how do I get access to the result? Incidentally, I'm using Java 1.4, so can't use any solutions that require annotations or other Java 1.5 features. Thanks, Don

    Read the article

  • Spring-hibernate mapping problem

    - by James
    I have a spring-hibernate application which is failing to map an object properly: basically I have 2 domain objects, a Post and a User. The semantics are that every Post has 1 corresponding User. The Post domain object looks roughly as follows: class Post { private int pId; private String attribute; ... private User user; //getters and setters here } As you can see, Post contains a reference to User. When I load a Post object, I want to corresponding User object to be loaded (lazily - only when its needed). My mapping looks as follows: <class name="com...Post" table="post"> <id name="pId" column="PostId" /> <property name="attribute" column="Attribute" type="java.lang.String" /> <one-to-one name="User" fetch="join" class="com...User"></one-to-one> </class> And of course I have a basic mapping for User set up. As far as my table schema is concerned, I have a table called post with a foreign UserId which links to the user table. I thought this setup should work, BUT when I load a page that forces the lazy loading of the User object, I notice the following Hiberate query being generated: Select ... from post this_ left outer join user user2_ on this.PostId=user2_.UserId ... Obviously this is wrong: it should be joining UserId from post with UserId from user, but instead its incorrectly joining PostId from post (its primary key) with UserId from user. Any ideas? Thanks!

    Read the article

  • using JMock to write unit test for a simple spring JDBC DAO

    - by Quincy
    I'm writing an unit test for spring jdbc dao. The method to test is: public long getALong() { return simpleJdbcTemplate.queryForObject("sql query here", new RowMapper<Long>() { public Long mapRow(ResultSet resultSet, int i) throws SQLException { return resultSet.getLong("a_long"); } }); } Here is what I have in the test: public void testGetALong() throws Exception { final Long result = 1000L; context.checking(new Expectations() {{ oneOf(simpleJdbcTemplate).queryForObject("sql_query", new RowMapper<Long>() { public Long mapRow(ResultSet resultSet, int i) throws SQLException { return resultSet.getLong("a_long"); } }); will(returnValue(result)); }}); Long seq = dao.getALong(); context.assertIsSatisfied(); assertEquals(seq, result); } Naturally, the test doesn't work (otherwise, I wouldn't be asking this question here). The problem is the rowmapper in the test is different from the rowmapper in the DAO. So the expectation is not met. I tried to put with around the sql query and with(any(RowMapper.class)) for the rowmapper. It wouldn't work either, complains about "not all parameters were given explicit matchers: either all parameters must be specified by matchers or all must be specified by values, you cannot mix matchers and values"

    Read the article

  • Problem with Spring @Configuration class

    - by easyrider
    Hi, i use class with @Configuration annotation to configure my spring application: @Configuration public class SpringConfiguration { @Value("${driver}") String driver; @Value("${url}") String url; @Value("${minIdle}") private int minIdle; // snipp .. @Bean(destroyMethod = "close") public DataSource dataSource() { DataSource dataSource = new DataSource(); dataSource.setDriverClassName(driver); dataSource.setUrl(url); dataSource.setUsername(user); dataSource.setPassword(password); dataSource.setMinIdle(minIdle); return dataSource; } and properties file in CLASSPATH driver=org.postgresql.Driver url=jdbc:postgresql:servicerepodb minIdle=1 I would like to get my DataSource configured object in my DAO class: ApplicationContext ctx = new AnnotationConfigApplicationContext(SpringConfiguration.class); DataSource dataSource = ctx.getBean(DataSource.class); But i get the error: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'springConfiguration': Injection of autowired dependencies failed; nested exception is org.springframework.beans.factory.BeanCreationException: Could not autowire field: private int de.hska.repo.configuration.SpringConfiguration.minIdle; nested exception is org.springframework.beans.TypeMismatchException: Failed to convert value of type 'java.lang.String' to required type 'int'; nested exception is **java.lang.NumberFormatException: For input string: "${minIdle}"** Caused by: java.lang.NumberFormatException: For input string: **"${minIdle}"** at java.lang.NumberFormatException.forInputString(**Unknown Source**) at java.lang.Integer.parseInt(Unknown Source) at java.lang.Integer.valueOf(Unknown Source) It worked with String properties (driver, url), but ${minIdle} (of type int) can't be resolved! Please help. Thanx in advance!

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >