Search Results

Search found 2895 results on 116 pages for 'wes weeks'.

Page 43/116 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• DFS keeps constantly replicating almost all files

  - by Adrian Godong

  We have always had problems with DFS, but recently it has gotten worse (with no apparent reason) to the point it's becoming harmful. We have one master server and DFS connections to other four servers. The four severs don't modify any files, so all replications always propagate from the master to the four other servers. The replicated directory has about 900,000 files. In the recent weeks, every time we check DFS, the DSF backlogs have hundredths of thousand of files. For instance now, the master server now replicates about 700,000 to three of the four servers while the fourth one is fine. Sometimes, only one is off, sometimes two and this time three. Also, it is never the same set of servers. It is inconceivable that something periodically touches all 900,000 files. The biggest change which happens is a scheduled update of several thousand files every six hours. Does anybody have the same problem? Is it a known issue?

  Read the article

• Macbook pro asks me to "Service Battery"

  - by Uwe Honekamp

  A couple of weeks ago I checked the battery and at that point in time (after 160 load cycles) it still had a capacity of 5000 mAh. Today, my 2006 macbook pro tells me via the battery menu to "Service Battery". According to Coconut Battery the current capacity is only 1590 mAh. The corresponding help text suggests contacting an Apple Authorized Service Provider (AASP) to have the computer checked. Before I decide to throw money at the AASP I'd like to understand what the AASP could possibly do to eliminate the problem. Isn't it more likely that the battery simply broke at 160 cycles and needs to be replaced? Are there any means by software or firmware to influence battery behavior? Of course, the computer hardware might be broken but how could this result in the described effect? And yes, I'm currently trying a calibration cycle but I have some doubts that it will save the day.

  Read the article

• DNA and Quantum computing

  - by Jacques

  I recently(A couple of weeks ago) read an article about the future of processing and how quantum-processors and DNA-processors(DNA-computing) are the future competitors of computing since both will completely outperform the computers of this era. In terms of processing speeds, what do we expect from these two different processing techniques ? Personally I believe that DNA-processing will be a major step towards AI. For labs and office work I think quantum-processing which will be more logical. I'm quite excited that i'm still so young - to see what the future of technology holds! Then again my parents will soon find out what the after-life holds... just as bloody exciting, if not more..

  Read the article

• Cannot boot from USB on my Mac mini

  - by Thai Tran

  Two weeks ago I installed OSX 10.8 on my Mac mini. After that, my system started to hang a lot, so I tried to erase it and install OSX 10.7 again. I used carbon Copy Cloner to make the bootable USB and it can load successfully on another Macbook. However, on my Mac mini, when I press on the option button to select the USB, it loads the white screen with a ban symbol at the center of the screen. After a moment, my machine automatically shuts down. Does anyone know how to solve this problem? Edit: this is exactly the problem I have now http://forums.macrumors.com/archive/index.php/t-1207168.html Update 1: the hdd seems ok (from disk utility). I restored the booting partition by disk utility (drag the dmg file to that partition). After restarting and using that partition to boot, prohibited symbol is still there

  Read the article

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• Restoring WordPress EC2 instance from snapshot results in 403 Forbidden error

  - by Eric Matthew Turano

  This problem has been perplexing me for weeks now. Here's how the issue goes: Launch Amazon Linux 64-bit instance, successfully install WordPress, and site is active w/ no issues Create snapshot of the instance's root volume Shut down instance Create volume from snapshot, attach to instance, and reboot instance Associate Elastic IP with instance Once that's done and I try logging onto the site, I am redirected to myurl.com/wp-admin/install.php and greeted with this message: Forbidden: You don't have permission to access /wp-admin/install.php on this server. Apache/2.2.25 (Amazon) Server at www.myurl.com Port 80 Port 80 is open on the inbound security group settings, so that's not the issue. Keep in mind all I am doing is merely creating a new volume and attaching it to the same instance, and this issue comes up. What am I doing wrong, and how can I create a complete backup of my instance without this error occuring?

  Read the article

• Computer can't boot

  - by zETO

  I have a 1 year old PC and the last weeks, when I press the ON button the PC doesn't power on ( Like I didn't press the ON button ). I have to plug and unplug a few times the power cord in order to make it work. At the start this happened once in 10 boots. Now it happens much more frequently to the point that when I press the power on button it never even opens if I don't do the cord switch thingy. Very rarely also, the PC shut downs for no reason and no warning, even when idle. The important fact to note here is, the green light on the motherboard is always on, even when the PC doesn't power on. What should I do? Is it a Power Supply failure or a motherboard? My power supply is a high end corsair model, AX850 and my motherboard a high end ASUS.

  Read the article

• Intel VT-x disappeared after upgrading to Windows 8

  - by StepTNT

  I've upgraded to Windows 8 some weeks ago (MSDNAA!) and today, while I was trying to run a VM, I've noticed that VT-x is disabled. Now, Hyper-V works without problems, as I've tried emulating Win7 and WP8; but VirtualBox says that VT-x is disabled and it can't run my VM. Just to double check, I've run Securable by GRC and the Intel utility and both says that I've got VT-x off. Here comes the problem: VT-x is ON in my BIOS, and it worked flawlessly before upgrading to Windows 8! Any kind of suggestion? EDIT: My CPU supports VT-x: http://ark.intel.com/products/52219

  Read the article

• Disk boot failure, insert system disk and press Enter.

  - by torbengb

  Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

  Read the article

• Can you recover from a backup with bad blocks?

  - by Macbook-Recovery

  The hard drive in my Macbook recently gave up while using it on the plane (dual prop, lots of vibration unfortunately). I have a backup of its contents from a few weeks ago, but there are files that aren't included in it that I would like to recover. As it stands right now, I have it plugged to my macbook by USB. Snow leopard recognizes it, but can't mount it. Therefore, tools like Diskwarrior and Techtools do not work. I started doing a clone of it with Data Rescue 3, but after 7 hours of activity (20% through the drive), it has copied 130 GB of the drive but reports all of the data as "bad blocks". My question is this: Is any data recoverable if the clone is completely composed of bad blocks?

  Read the article

• Can't Type Tilde character in Mac OS X

  - by Brock Woolf

  Hi this is a new problem that I did not have a few weeks ago. I have a Logitech Illuminated Keyboard running on Mac OS X 10.6 (Snow Leopard). The problem is that I cannot type a tilde. Instead when I press the tilde I get this character: §§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§ I cannot for the life of me figure this out, except that I vaguely remember I can asked to redetect the Mac keyboard layout for this keyboard and I think i chose the wrong one. Now I get this weird character when pressing tilde. How can I fix this? Or how can I redetect this keyboard layout? Thanks.

  Read the article

• Hardware issue: UI freezes and hard drive light goes solid several times per hour

  - by alchemical

  I have a workstation that has been acting up for the last few weeks. It currently has Windows Server 2008 R2 installed on it, and 2 HDD mirrored. A few times per hour the screen will freeze up, applications will say "not responding", sometimes the screen will turn a lighter shaded color--at the same time the HDD light is on solid. This lasts anywhere from 10 to about 50 seconds. Could this be something with one of the drives or the mechanism keeping the mirror in place? Any other ideas?

  Read the article

• Computer and internet use on a boat?

  - by dlamblin

  Let's assume that I seriously would like to be able to use my computer as easily and as carefreely while on a boat as I do while at home. In short, if I were on a boat for extended periods, such as two weeks at a time and occasionally over a few days out of port (this would be a 2 person sailing vessel), what would my options be for power, durability, and of course, internet access? I want more than just email, as I will likely keep doing a tad of development, and will be looking at google earth from time to time. I am already assuming that we're going with some kind of laptop, maybe even a macbook pro 12". I personally feel that netbooks are underpowered. And the last computer that I got a boat-friendly rating for was a ZX Spectrum, which was before the internet, and was likely due to it's 12vdc-happiness.

  Read the article

• ssh authentication nfs

  - by user40135

  Hi all I would like to do ssh from machine "ub0" to another machine "ub1" without using passwords. I setup using nfs on "ub0" but still I am asked to insert a password. Here is my scenario: * machine ub0 and ub1 have the same user "mpiu", with same pwd, same userid, and same group id * the 2 servers are sharing a folder that is the HOME directory for "mpiu" * I did a chmod 700 on the .ssh * I created a key using ssh-keygene -t dsa * I did "cat id_dsa.pub authorized_keys". On this last file I tried also chmod 600 and chmod 640 * off course I can guarantee that on machine ub1 the user "shared_user" can see the same fodler that wes mounted with no problem. Below the content of my .ssh folder Code: authorized_keys id_dsa id_dsa.pub known_hosts After all of this calling wathever function "ssh ub1 hostname" I am requested my password. Do you know what I can try? I also UNcommented in the ssh_config file for both machines this line IdentityFile ~/.ssh/id_dsa I also tried ssh -i $HOME/.ssh/id_dsa mpiu@ub1 Below the ssh -vv Code: OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ub1 [192.168.2.9] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /mirror/mpiu/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version lshd-2.0.4 lsh - a GNU ssh debug1: no match: lshd-2.0.4 lsh - a GNU ssh debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-3ubuntu1 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,spki-sign-rsa debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server-client 3des-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client-server 3des-cbc hmac-md5 none debug2: dh_gen_key: priv key bits set: 183/384 debug2: bits set: 1028/2048 debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'ub1' is known and matches the RSA host key. debug1: Found key in /mirror/mpiu/.ssh/known_hosts:1 debug2: bits set: 1039/2048 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /mirror/mpiu/.ssh/id_dsa (0xb874b098) debug1: Authentications that can continue: password,publickey debug1: Next authentication method: publickey debug1: Offering public key: /mirror/mpiu/.ssh/id_dsa debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: password,publickey debug2: we did not send a packet, disable method debug1: Next authentication method: password mpiu@ub1's password: I hangs here!

  Read the article

• Tape Supplier in Canada

  - by JohnyD

  I'm not sure if it's kosher to ask.. but where can one purchase good quality / well priced backup tapes within Canada, online? I'm asking because my current vendor, DataWrite, has sent me bad tapes for the 3rd time in a row. I have no idea where they get their product but when I put an order in for 20 tapes and 2 cleaning tapes and I have to call them up 4 times over the next 2 weeks, I expect those tapes to work. Well, like I said, this is the 3rd batch that I'm sending back and we've been dealing with them exclusively for well over 5 years so I thought I'd ask the pool of knowledge. I'm currently looking for DAT72 tapes but soon will be looking for LTO-3 and LTO-4. Thank you

  Read the article

• Google Chrome Freezes ALL the time

  - by Zach Russell

  I'm running the most recent version of Google Chrome. I have had this computer for three weeks now with no problems, now today it just WON'T work for me. I am running windows 8 with a machine that can more than handle Chrome. It keeps freezing up literally every five seconds then it unfreezes. I cannot click links or scroll, but I can switch tabs. I have tried several things. Uninstalling Google Chrome Reinstalling Chrome but not logging in Deleting All plugins including Flash Creating a new user and accessing chrome from there This is insanely frustrating and would be forever indebted to whomever helped me solve this problem. I cannot imagine what it is. Thank you in advance!

  Read the article

• Windows 7 Group Policy blocking Adobe Reader

  - by Danny Chia

  A few weeks ago, my company blocked Adobe Reader due to an unpatched security issue. However, we recently moved one of our computers to a project that didn't require access to the corporate network, and IT gave us the green light to override Group Policy and re-enable Adobe Reader. However, this is something we've been unable to achieve. We've tried the following (in no particular order), all to no avail: Ran the program as administrator Renamed the program (the blocking is likely signature-based) Deleted registry.pol Changed the value of "Start" in \HKEY_LOCAL_MACHINE\CurrentControlSet\services\gpsvc to "4" (to prevent group policy from applying, even though it's no longer on the corporate domain) Checked SRP settings under Local Security Policy - nothing was there Checked AppLocker settings under Local Security Policy - nothing there either Incidentally, I found a few registry keys with descriptions referring to Adobe Reader being blocked. I deleted all of them, but it didn't help. Changed the permission settings of the program Re-installed Adobe Reader Is there anything I missed, short of doing a clean install?

  Read the article

• Amazon EC2 EBS volume scheduled backup/snapshots using puppet / similar tools

  - by Ehrann Mehdan

  I am not a Linux admin, although I wish I was, and I have seen these questions Amazon EC2 Backup Strategy Amazon EC2 + EBS:: Regular backup plan? Simple Backup Strategy for Amazon EC2 instances / volumes? And this suggestion http://alestic.com/2009/09/ec2-consistent-snapshot I tried using command line + crontab (the command line works, but crontab for some reason, doesn't) But I'm still pretty lost, all I want is an automated, rolling backup of my amazon EC2 (EBS) data (by rolling I mean keep 3-4 weeks back, but delete old snapshots as new ones come for cost control) And as things usually go, if there is something that is hard and painful, someone creates a solution for it. My question is simple, is there a way using a tool like Puppet to do it without a painful learning curve? (or via other tools like http://ylastic.com) If yes, how?

  Read the article

• Ubuntu with Netatalk and Samba TimeMachine can't connect

  - by Philip

  I installed netatalk on my Ubuntu Server a few weeks ago and configured it so that I could use Timemachine from my mac to backup on a server instead of a external hard drive. It worked really good until yesterday when I installed Samba to be able to share certain folders on my server to my mac. Now I receive an error msg: There are no shares available or you are not allowed to access them on the server. Please contact your system administrator to resolve the problem. From what I understand is that the problem is on the server and not on my mac. I have tried to restart the computer and without adding any of the folders Samba is sharing adding the timemachine "afp://...@...". Is there a problem running them both at the same time, do I need to configure samba so that it doesn't reject afp? I'm pretty new at this...

  Read the article

• Epson XP-600 will not print properly with all new ink recently installed

  - by Joy

  I just installed brand new Epson 273 ink cartridges ($64 worth!) in my Epson XP-600 printer. One box had all the colors plus black, and one had the fatter black cartridge. I am not getting ANY black print on paper, although, when I lift the cartridges out, they show ink inside. Now the yellow is saying LOW though all cartridges are less than 2 weeks old. I only use this printer sparingly—not for business or work reasons. I am ready to scream, as the ink cost almost as much as the actual printer (which is barely 7 months old)! Any ideas on how to solve this issue?

  Read the article

• Windows 8 Upgrade : From Windows 7 Trial

  - by Golmaal

  This is a bit complicated it seems. I own Windows Vista Ultimate 64-bit (Retail). It was okay, but around a couple of weeks ago I had some system crash and at that time I decided that I will install Windows 8 as soon as it comes out. However, because of some problems in Vista, at the time of crash, I installed Windows 7 trial. I had some urgent work to do which I accomplished and then I switched the PC off. Now I have purchased Windows 8 Pro Upgrade ($40 version). If I go for a clean install, will it be able to install Windows 8 on not-activated Windows 7? During activation, if it asks for Vista serial number, I can provide it. Or will I first have to install Vista and then only it will allow me to install Windows 8? Also, I used the Upgrade Assistant to download Windows 8 on my laptop (Windows 7 OEM). Will it work on my above mentioned desktop?

  Read the article

• XP Mode in Windows 7 professional recently ceased to work

  - by Ian FLetcher

  I have used Windows XP Mode in Windows Professional 7 once a week for around 2 years to run Quicken 98. About 2 weeks ago the XP Mode completely stopped working. I get different responses when I try to launch. I can sometimes see a launch screen for XP (which I never used to get) which then hangs Sometimes I just get a black screen Sometimes I get an error message in a cmd like interface that says "windows could not start because the following file is missing or corrupt \system32\ntoskrnl.exe please reinstall a copy of the above file. I have noticed that in the tools tab at the top of the screen "enable integration features" is greyed out. Any recommendations? Ian

  Read the article

• Nagios and rrd on a old server

  - by Pier

  I have an old server (P4 based) on which nagios (and all the other tools to monitor) is running. In the last few weeks we are seeing a strange behavior. In the /var/spool/pnp4nagios (where temporary files are stored before getting processed by pnp4nagios daemon) we have many files like perfdata.1274949941-PID-18839 and we get an error in npcd.log: [05-27-2010 11:17:46] NPCD: ThreadCounter 0/15 File is perfdata.1274951306-PID-27849 [05-27-2010 11:17:46] NPCD: File 'perfdata.1274951306-PID-27849' is an already in process PNP file. Leaving it untouched. Sometimes some graph are not drawn. The server is pretty loaded (around 5-6 normally) and i suspect that npcd goes in timeout and leave those files behind. What could I do (apart from change the server)? Few infos about the system: centos 5.5 nagios 3.2.1 pnp4nagios 0.6 (from sources) Thanks

  Read the article

• Is there any descent open-source search engine solutions?

  - by Nazariy

  Few weeks ago my friend asked me how hard is it to launch your own search engine service with list of websites that suppose to be crawled time to time. First what come at my mind was Google Custom Search however pricing policy is quite tricky and would drain your budget if you reach 500K queries per year. Another solution I found here was SearchBlox, which can be compared to Google Mini service. It's quite good solution if you planing to cover search over small amount of websites but for larger projects it is not very handy. I also found few other search platforms like Lucene, Hadoop and Xapian which seems to be quite powerful solutions to reach Google search quality, and Nutch as a web crawler. As most of open-source projects they share same problem, luck of comprehensive guidance of usage, examples and it's expected that you are expert in this subject. I'm wondering if any of you using this solutions, which of them would you recommend, and what should I be aware of?

  Read the article

• Windows Media Player library not appearing properly

  - by Rick

  Windows Media Player library is listed 80% under unknown artist/unknown album despite each song containing the album and artist details. The library location is usually unresponsive and Media Player 12 is usually hanging for 3 or 4 minutes every 5 or 6 minutes. Library was fine two weeks ago then I had updated and it has not worked right since. My PC specifics: Windows 7 Ultimate 32bit 8 GB ram Processor 3.76 Ghz Primary drive 1Tb Secondary drive 500Gb Default save for the library is on the secondary drive. I've already tried media player settings troubleshooter and the library troubleshooter to no avail.

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >