Search Results

Search found 4290 results on 172 pages for 'y low'.

Page 43/172 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• How to increase wifi speed for laptops

  - by sagar

  Now, Let me explain the situation. I am having a query regarding Wi-Fi network. I am having PC & laptop. I requested my Wi-Fi providers that I want connection in my PC. So that - Wi-Fi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my does not have a built in Wi-Fi adapter. Now - almost laptops have built in Wi-Fi. Now - On terrace there is Wi-Fi with superb speed. But on my flat - Wi-fi comes with low speed. So, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

  Read the article

• Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

  - by MichaelGG

  Are there any production-quality iSCSI SANs suitable for use with Windows Server 2008/SQL Server for failover clustering? So far, I've only seen Dell's MD3000i, and HP's MSA 2000 (2012i), which both are around $6K with a minimal disk configuration. Buffalo (yea, I know), has a $1000 device with iSCSI support, but they say it will not work for 2008 failover clustering. I'm interested in seeing something suitable for failover in a production environment, but with very low IO requirements. (Clustering, say, a 30GB DB.) As for using software: On Windows, StarWind seems to have a great solution. But it's actually more money than buying a hardware SAN. (As I understand, only the enterprise edition supports having replicas, and that's $3000 a license.) I was thinking I could use Linux, something like DRBD + an iSCSI target would be fine. However, I haven't seen any free or low-cost iSCSI software that supports SCSI-3 persistent reservations, which Windows 2008 needs for failover clustering. I know $6K isn't much at all, just curious to see if there are practical cheaper solutions out there. And finally, yes, the software is expensive, but many small business get MS BizSpark, so the Windows 2008 Enterprise / SQL 2008 licenses are completely free.

  Read the article

• How to let MSN or Yahoo Messenger set you to be Invisible or Offline when you are idle for an hour?

  - by Jian Lin

  The short question is: How do we let MSN or Yahoo Messenger set us to be Invisible or Offline when we are idle for half an hour or an hour? The reason is: if I am on 24 hours a day, some people see me as weird. Some people see my value as low, because I am always there. There are ways to set me to "Away" or "Busy" after 10 minutes, but there seems to be no way to set myself to invisible or offline after 1 hour. As I am a software developer, I am very used to turning the computer on 24 hours a day. (for example, for checking email for urgent fixes, and fix issue and push to web server). We don't turn off computer usually even when we sleep, because we may sometimes can't sleep yet and come check on the computer, or wake up in the morning and immediately need to check if everything is ok. But, my MSN and Yahoo Messenger is always on for 24 hours a day, and I found that some girls start to ask me why I am always there 24 hours a day (even though they see me as away or busy, their feeling is that I am always there). What's more, I found that since I am always there, my value actually drop in their eyes, because hard to get = high value, and always there = low value. Some people feel me as having nothing much to do, always in front of computer, or what is he doing in front of computer so much? Now since it is my job, and I need to read emails once in a while, I am in fact in front of the computer more than some other people. I am in front of the computer maybe 10 hours a day, far from 24 hours a day. Is there an easy and automatic solution to this?

  Read the article

• cPanel web server redundancy advice?

  - by crgnz

  At present I operate a (reasonably low volume) web-hosting service with a Centos 5.3 server running cPanel/WHM. I would like to implement a level of redundancy such that in the event of server failure, I can restore service with a minimum of effort in less than 60 minutes. I also want to setup a secondary DNS that cPanel will replicate with. My current idea is to kill two birds with one stone by: My current server is called "www1" Purchase an identical server (HP DL360 G4) with mirrored disks. Call this server "www2" Install Centos 5.4 (or perhaps I should install 5.3 to be identical with www1) Install cPanel/WHM on this server and fully license it Setup www1 and www2 cPanel to replicate DNS with each other Setup a nightly replication script that does the following: a) rsync's the /home directory from www1 to www2 b) dumps all MySQL databases on www1 and copies them to a temp folder (with root access only) on www2 c) triggers a script to run on www2 that restores the MySQL dumps Thus each night a fully working copy of all the websites and MySQL databases is copied to www2. I do not have enough knowledge of MySQL replication to understand if it works safely and transparently with cPanel. Thus I propose the mysql dump/copy/restore due to not knowing any better! In the event that www1 dies a horrible death, I envisage that I could login to www2, change the IP addresses to those that www1 had, and presto, the websites are available again. The advantage of this idea is that it is fairly simple and "low tech" and thus does not require an expert sysadmin to setup and monitor (I am NOT an expert sysadmin) The disadvantage of this idea is that up to a full days worth of data changes would be lost. I think this would be acceptable to the sorts of customers I host at the moment. The other disadvantage would be having to pay for a full cPanel license, but I am comfortable with that cost, so for now all I want to discuss are technical considerations. Is this a sound scheme?

  Read the article

• How do I configure nVidia drivers on a Portable Ubuntu setup?

  - by Nicholas Flynt

  I've been pulling my hair out over this one for a couple of days now, google is no help. I've created a wonderful (until this issue) portable copy of Ubuntu linux that will boot on mostly anything by using a USB enclosure for my laptop's 80GB SATA drive. So far so good, it boots and runs on everything, and on non-nVidia card setups was even detecting the drivers, or letting me install the required drivers for hardware acceleration and compiz. Because you know, the wobble windows are the most awesome thing ever. Anyway, my desktop machine had an nVidia card, so I'm thinking, sure, I'll just install the nVidia drivers like before and everything will work happily. Not so-- now the desktop and any other nVidia cards work great, but it seems to have completely disabled any other graphics cards. When the kernel module detects that an nVidia card isn't present, it shoots up this nasty little dialog box giving me the option to boot into "low graphics" mode, which doesn't even allow me to use the correct screen resolution, much less see the installed graphics card and try to configure a driver for it. Is there any way to configure Ubuntu (with the dreaded nVidia kernel module) so that it can use nVidia's drivers when an nVidia card is present, and default to the normal (not low-graphics) setup in other cases, so that it has a fair chance of using what's actually present? I'm not afraid to much with config files, I just don't know the underlying system well enough to feel comfortable diving in without a push in the right direction. Thanks guys!

  Read the article

• High latency issue for web service call from amazon aws ec2 to local server

  - by SibzTer

  We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• Win 2008 R2 - copying TO disk is very slow, copying FROM is more or less okay

  - by avs099

  I have Windows 2008 R2 SP1 with 4 identical SATA disks (Seagate Barracude 7200) in RAID 5 array. It has 4Gb of memory; all recent updates are installed. Problem: when I copy large file from one folder to another, I get about 10MB/s average speed. When I read this file from network share via 1Gbps connection - I get about 25-30 MB/s. Both numbers seems to be low for me - but specifically I'm very frustrated with low write speed. there is no antivirus, no hyper-v, it's just a fileserver - i when i do my tests nobody else reads/write from it (we have only 4 people in a team, so I'm sure). Not sure if that matters, but there is only 1 logic disk "C" with all available space (1400 GB). I'm not an admin at all, so I have no idea where to look and what other information to provide. I did run performance monitor with "% idle time", "avg bytes read", "avg byte write" - here is the screenshot: I'm not sure why there are such obvious spikes. Any idea? Please let me know if you need me to provide more information - what counters should I check, etc. I'm very eager to get this solved. Thank you. UPDATE: we have another Windows 2008 R2 SP1 server with 2 RAID1 arrays - one is disk C (where windows is installed, another one is disk E). It is running Hyper-V and does not have antivirus. I noticed the following behavior when I copy large file (few GBs): C - C: about 50MB/sec C - E: about 55MB/sec E - E: 8MB/sec!!! E - C: 8MB/sec!!! what could cause this?? E drive is RAID1 array from same Seagate Barracuda 1TB drives..

  Read the article

• linux Firewall question

  - by bcrawl

  I have few generic questions about firewalls and I thought the community up here could help me out. 1) So I recently installed Ubuntu server barebones. I checked for open ports, none were open which was great. Is that because there was a firewall installed or was it because there were no applications installed? 2) I installed some applications, (Apache, postgres,ssh, Java app and some few). Between these, I ended up opening a few ports (~10). Now I have a list of all the ports I would need open. So, how do I go about protecting them? [Is this the right question to ask? does the process go like this, Install Firewall - Allow Said needed ports - deny rest using IPtables rules] This is going to be open to the internet. Hosting low traffic ecommerce sites. 3) What do you think is the easiest way for me to quasi-secure the server, [low maintenance overhead/simplicity. Any open source "software" which can make my life easier?] 4) Finally, of the said open ports [2], I have 2 ports I need to close because they are telnet ports. Can I close these ports without installing a "firewall" Thanks all for the help and Merry Christmas!!!!!!!

  Read the article

• How to set minimum SQL Server resource allocation for a database?

  - by Jeff Widmer

  Over the past Christmas holiday week, when the website I work on was experiencing very low traffic, we saw several Request timed out exceptions (one on each day 12/26, 12/28, 12/29, and 12/30) on several pages that require user authentication. We rarely saw Request timed out exceptions prior to this very low traffic week. We believe the timeouts were due to the database that it uses being "spun down" on the SQL Server and taking longer to spin up when a request came in. There are 2 databases on the SQL Server (SQL Server 2005), one which is specifically for this application and the other for the public facing website and for authentication; so in the case where users were not logged into the application (which definitely could have been for several hours at a time over Christmas week) the application database probably received no requests. We think at this point SQL Server reallocated resources to the other database and then when a request came in, extra time was needed to spin up the application database and the timeout occurred. Is there a way to tell SQL Server to give a minimum amount of resources to a database at all times?

  Read the article

• How do hdparm's -S and -B options interact?

  - by user697683

  These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

  Read the article

• Triple-monitor set-up (2 unique, 1 cloned): Can a VGA splitter be used on one output of a dual-head

  - by stakx

  Background: I'm currently researching hardware components for some kind of information terminal we're building. This application of ours makes use of three output screens: (1) A touch screen where all user input is made; (2) A regular LCD monitor where the requested information is being displayed; and (3) A projector which displays exactly the same signal as screen (2) does. (All screens will run at the same resolution of 1024x768 btw.) Now I figured that using a dual-head video card would be sufficient, let's say a Matrox P690 low-profile PCI card. This would involve having a Y cable connected to the graphics card itself, then two DVI-to-VGA adapters at each end of the Y cable, and then having a VGA splitter on one of the VGA outputs. The following shows the setup in question: 0--1---------2-> VGA (DSUB-15) \ \ ----2-3---------> VGA (DSUB-15) \ \ -----------------> VGA (DSUB-15) 0: graphics card (LFH60 jack) 1: LFH60 to DVI-I dual monitor Y cable 2: DVI-to-VGA adapters 3: VGA splitter cable Question(s): Will this work? I'm particularly concerned about the following points: Can a low-profile PCI video card output a signal which is strong enough for three monitors (even if it's a dual-head card)? Does the combination of so many adapters and splitter cables work? (The LFH-to-DVI cable comes with the video card) Will the VGA splitter cable degrade the signal on the output screen & projector significantly? (If so, would a USB-powered splitter cable remedy this problem?) I can't possibly expect anyone to answer all those questions, but any input is appreciated.

  Read the article

• DNS failover in a two datacenter scenario

  - by wanson

  I'm trying to implement a low-cost solution for website high availability. I'm looking for the downsides of the following scenario: I have two servers with the same configuration, content, mysql replication (dual-master). They are in different datacenters - let's call them serverA and serverB. Users use serverA - serverB is more like a backup. Now, I want to use DNS failover, to switch users from serverA to serverB when serverA goes down. My idea is that I setup DNS servers (bind/powerdns) on serverA and serverB - let's call them ns1.website.com and ns2.website.com (assuming I own website.com). Then I configure my domain to use them as its nameservers. Both DNS servers will return serverA IP as my website's IP. If serverA goes down I can (either manually or automatically from serverB) change configuration of serverB's DNS, to return IP of serverB as website's IP. Of course the TTL will be low, as it's supposed to be in DNS failovers. I know that it may take some time to switch to serverB (DNS ttl, time to detect serverA failure, serverB DNS reconfiguration etc), and that some small part of users won't use serverB anyway. And I'm OK with that. But what are other downsides of such an approach? An alternative scenario is that ns1.website.com will return serverA IP as website's IP, and ns2.website.com will return serverB IP as website's IP. But AFAIK clients not always use primary nameserver and sometimes would use secondary one. So some small part of users would use serverB instead of serverA which is not quite what I'd like. Can you confirm that DNS clients behave like that and can you tell what percentage of clients would possibly use serverB instead of serverA (statistically)? This one also has the downside that when serverA goes back up, it will be automatically used as website's primary server, which is also a bad situation (cold cache, mysql replication could fail in the meantime etc). So I'm adding it only as a theoretical alternative. I was thinking about using some professional DNS failover companies but they charge for the number of DNS requests and the fees are very high (why?)

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• Slow filesystem access

  - by danneh3826

  I'm trying to diagnose a slow filesystem issue on a server I look after. It's been ongoing for quite some time, and I've run out of ideas as to what I can try. Here's the thick of it. The server itself is a Dell Poweredge T310. It has 4 SAS hard drives in it, configured at RAID5, and is running Citrix XenServer 5.6. The VM is a (relatively) old Debian 5.0.6 installation. It's given 4 cores, and 4Gb's of RAM. It has 3 volumes. A 10Gb volume (ext3) for the system, 980Gb volume (xfs) for data (~94% full), and another 200Gb volume (xfs) for data (~13% full). Now here's the weird thing. Read/write access to the 980Gb volume is really slow. I might get 5Mb/s out of it if I'm lucky. At first I figured it was actually disk access in the system, or at a hypervisor level, but ruled that out entirely as other VMs on the same host are running perfectly fine (a good couple hundred Mb/s disk r/w access). So then I started to target this particular VM. I started thinking it was XFS, but to prove it I wasn't going to attempt to change the filesystem on the 980Gb drive, with years and years of billions of files on there. So I provisioned the 200Gb drive, and did the same read/write test (basically dd), and got a good couple hundred Mb/s r/w access to it. So that ruled out the VM, the hardware, and the filesystem type. There's also a lot of these in /var/log/kern.log; (sorry, this is quite long) Sep 4 10:16:59 uriel kernel: [32571790.564689] httpd: page allocation failure. order:5, mode:0x4020 Sep 4 10:16:59 uriel kernel: [32571790.564693] Pid: 7318, comm: httpd Not tainted 2.6.32-4-686-bigmem #1 Sep 4 10:16:59 uriel kernel: [32571790.564696] Call Trace: Sep 4 10:16:59 uriel kernel: [32571790.564705] [<c1092a4d>] ? __alloc_pages_nodemask+0x476/0x4e0 Sep 4 10:16:59 uriel kernel: [32571790.564711] [<c1092ac3>] ? __get_free_pages+0xc/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564716] [<c10b632e>] ? __kmalloc+0x30/0x128 Sep 4 10:16:59 uriel kernel: [32571790.564722] [<c11dd774>] ? pskb_expand_head+0x4f/0x157 Sep 4 10:16:59 uriel kernel: [32571790.564727] [<c11ddbbf>] ? __pskb_pull_tail+0x41/0x1fb Sep 4 10:16:59 uriel kernel: [32571790.564732] [<c11e4882>] ? dev_queue_xmit+0xe4/0x38e Sep 4 10:16:59 uriel kernel: [32571790.564738] [<c1205902>] ? ip_finish_output+0x0/0x5c Sep 4 10:16:59 uriel kernel: [32571790.564742] [<c12058c7>] ? ip_finish_output2+0x187/0x1c2 Sep 4 10:16:59 uriel kernel: [32571790.564747] [<c1204dc8>] ? ip_local_out+0x15/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564751] [<c12055a9>] ? ip_queue_xmit+0x31e/0x379 Sep 4 10:16:59 uriel kernel: [32571790.564758] [<c1279a90>] ? _spin_lock_bh+0x8/0x1e Sep 4 10:16:59 uriel kernel: [32571790.564767] [<eda15a8d>] ? __nf_ct_refresh_acct+0x66/0xa4 [nf_conntrack] Sep 4 10:16:59 uriel kernel: [32571790.564773] [<c103bf42>] ? _local_bh_enable_ip+0x16/0x6e Sep 4 10:16:59 uriel kernel: [32571790.564779] [<c1214593>] ? tcp_transmit_skb+0x595/0x5cc Sep 4 10:16:59 uriel kernel: [32571790.564785] [<c1005c4f>] ? xen_restore_fl_direct_end+0x0/0x1 Sep 4 10:16:59 uriel kernel: [32571790.564791] [<c12165ea>] ? tcp_write_xmit+0x7a3/0x874 Sep 4 10:16:59 uriel kernel: [32571790.564796] [<c121203a>] ? tcp_ack+0x1611/0x1802 Sep 4 10:16:59 uriel kernel: [32571790.564801] [<c10055ec>] ? xen_force_evtchn_callback+0xc/0x10 Sep 4 10:16:59 uriel kernel: [32571790.564806] [<c121392f>] ? tcp_established_options+0x1d/0x8b Sep 4 10:16:59 uriel kernel: [32571790.564811] [<c1213be4>] ? tcp_current_mss+0x38/0x53 Sep 4 10:16:59 uriel kernel: [32571790.564816] [<c1216701>] ? __tcp_push_pending_frames+0x1e/0x50 Sep 4 10:16:59 uriel kernel: [32571790.564821] [<c1212246>] ? tcp_data_snd_check+0x1b/0xd2 Sep 4 10:16:59 uriel kernel: [32571790.564825] [<c1212de3>] ? tcp_rcv_established+0x5d0/0x626 Sep 4 10:16:59 uriel kernel: [32571790.564831] [<c121902c>] ? tcp_v4_do_rcv+0x15f/0x2cf Sep 4 10:16:59 uriel kernel: [32571790.564835] [<c1219561>] ? tcp_v4_rcv+0x3c5/0x5c0 Sep 4 10:16:59 uriel kernel: [32571790.564841] [<c120197e>] ? ip_local_deliver_finish+0x10c/0x18c Sep 4 10:16:59 uriel kernel: [32571790.564846] [<c12015a4>] ? ip_rcv_finish+0x2c4/0x2d8 Sep 4 10:16:59 uriel kernel: [32571790.564852] [<c11e3b71>] ? netif_receive_skb+0x3bb/0x3d6 Sep 4 10:16:59 uriel kernel: [32571790.564864] [<ed823efc>] ? xennet_poll+0x9b8/0xafc [xen_netfront] Sep 4 10:16:59 uriel kernel: [32571790.564869] [<c11e40ee>] ? net_rx_action+0x96/0x194 Sep 4 10:16:59 uriel kernel: [32571790.564874] [<c103bd4c>] ? __do_softirq+0xaa/0x151 Sep 4 10:16:59 uriel kernel: [32571790.564878] [<c103be24>] ? do_softirq+0x31/0x3c Sep 4 10:16:59 uriel kernel: [32571790.564883] [<c103befa>] ? irq_exit+0x26/0x58 Sep 4 10:16:59 uriel kernel: [32571790.564890] [<c118ff9f>] ? xen_evtchn_do_upcall+0x12c/0x13e Sep 4 10:16:59 uriel kernel: [32571790.564896] [<c1008c3f>] ? xen_do_upcall+0x7/0xc Sep 4 10:16:59 uriel kernel: [32571790.564899] Mem-Info: Sep 4 10:16:59 uriel kernel: [32571790.564902] DMA per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564905] CPU 0: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564908] CPU 1: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564911] CPU 2: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564914] CPU 3: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564916] Normal per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564919] CPU 0: hi: 186, btch: 31 usd: 175 Sep 4 10:16:59 uriel kernel: [32571790.564922] CPU 1: hi: 186, btch: 31 usd: 165 Sep 4 10:16:59 uriel kernel: [32571790.564925] CPU 2: hi: 186, btch: 31 usd: 30 Sep 4 10:16:59 uriel kernel: [32571790.564928] CPU 3: hi: 186, btch: 31 usd: 140 Sep 4 10:16:59 uriel kernel: [32571790.564931] HighMem per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564933] CPU 0: hi: 186, btch: 31 usd: 159 Sep 4 10:16:59 uriel kernel: [32571790.564936] CPU 1: hi: 186, btch: 31 usd: 22 Sep 4 10:16:59 uriel kernel: [32571790.564939] CPU 2: hi: 186, btch: 31 usd: 24 Sep 4 10:16:59 uriel kernel: [32571790.564942] CPU 3: hi: 186, btch: 31 usd: 13 Sep 4 10:16:59 uriel kernel: [32571790.564947] active_anon:485974 inactive_anon:121138 isolated_anon:0 Sep 4 10:16:59 uriel kernel: [32571790.564948] active_file:75215 inactive_file:79510 isolated_file:0 Sep 4 10:16:59 uriel kernel: [32571790.564949] unevictable:0 dirty:516 writeback:15 unstable:0 Sep 4 10:16:59 uriel kernel: [32571790.564950] free:230770 slab_reclaimable:36661 slab_unreclaimable:21249 Sep 4 10:16:59 uriel kernel: [32571790.564952] mapped:20016 shmem:29450 pagetables:5600 bounce:0 Sep 4 10:16:59 uriel kernel: [32571790.564958] DMA free:2884kB min:72kB low:88kB high:108kB active_anon:0kB inactive_anon:0kB active_file:5692kB inactive_file:724kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15872kB mlocked:0kB dirty:8kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:5112kB slab_unreclaimable:156kB kernel_stack:56kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564964] lowmem_reserve[]: 0 698 4143 4143 Sep 4 10:16:59 uriel kernel: [32571790.564977] Normal free:143468kB min:3344kB low:4180kB high:5016kB active_anon:56kB inactive_anon:2068kB active_file:131812kB inactive_file:131728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:715256kB mlocked:0kB dirty:156kB writeback:0kB mapped:308kB shmem:4kB slab_reclaimable:141532kB slab_unreclaimable:84840kB kernel_stack:1928kB pagetables:22400kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564983] lowmem_reserve[]: 0 0 27559 27559 Sep 4 10:16:59 uriel kernel: [32571790.564995] HighMem free:776728kB min:512kB low:4636kB high:8760kB active_anon:1943840kB inactive_anon:482484kB active_file:163356kB inactive_file:185588kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3527556kB mlocked:0kB dirty:1900kB writeback:60kB mapped:79756kB shmem:117796kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.565001] lowmem_reserve[]: 0 0 0 0 Sep 4 10:16:59 uriel kernel: [32571790.565011] DMA: 385*4kB 16*8kB 3*16kB 9*32kB 6*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2900kB Sep 4 10:16:59 uriel kernel: [32571790.565032] Normal: 21505*4kB 6508*8kB 273*16kB 24*32kB 3*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 143412kB Sep 4 10:16:59 uriel kernel: [32571790.565054] HighMem: 949*4kB 8859*8kB 7063*16kB 6186*32kB 4631*64kB 727*128kB 6*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 776604kB Sep 4 10:16:59 uriel kernel: [32571790.565076] 198980 total pagecache pages Sep 4 10:16:59 uriel kernel: [32571790.565079] 14850 pages in swap cache Sep 4 10:16:59 uriel kernel: [32571790.565082] Swap cache stats: add 2556273, delete 2541423, find 82961339/83153719 Sep 4 10:16:59 uriel kernel: [32571790.565085] Free swap = 250592kB Sep 4 10:16:59 uriel kernel: [32571790.565087] Total swap = 385520kB Sep 4 10:16:59 uriel kernel: [32571790.575454] 1073152 pages RAM Sep 4 10:16:59 uriel kernel: [32571790.575458] 888834 pages HighMem Sep 4 10:16:59 uriel kernel: [32571790.575461] 11344 pages reserved Sep 4 10:16:59 uriel kernel: [32571790.575463] 1090481 pages shared Sep 4 10:16:59 uriel kernel: [32571790.575465] 737188 pages non-shared Now, I've no idea what this means. There's plenty of free memory; total used free shared buffers cached Mem: 4247232 3455904 791328 0 5348 736412 -/+ buffers/cache: 2714144 1533088 Swap: 385520 131004 254516 Though now I see the swap is relatively low in size, but would that matter? I've been starting to think about fragmentation, or inode usage on that large partition, but a recent fsck on it showed is as only like 0.5% fragmented. Which leaves me with inode usage, but how much of an effect really would a large inode table or filesystem TOC have? I've love to hear people's opinions on this. It's driving me potty! df -h output; Filesystem Size Used Avail Use% Mounted on /dev/xvda1 9.5G 6.6G 2.4G 74% / tmpfs 2.1G 0 2.1G 0% /lib/init/rw udev 10M 520K 9.5M 6% /dev tmpfs 2.1G 0 2.1G 0% /dev/shm /dev/xvdb 980G 921G 59G 94% /data

  Read the article

• replacing buffalo lonkstations with FreeNAS, overall backup strategy, am I on the right path?

  - by Shreko

  We've been using 2 Buffalo LinkStations of 320Gb each for shared directory and employee's server storage (around 20 employees). So only documents (word, excel, cad drawings etc.) and database backup of the main application server (ERP, Accounting) 1 buffalo box serves as a main one, located at the server room, next to the main application server and the other buffalo box is located on the opposite side of the building (for fire protection) in a secure storage room and backs up the first one. We also have several external HDs that backs up everything from the buffalo box for an offsite backup. After 3.5 years of using these, capacity is a main limitation, I'm planning a replacement and would like to use FreeNAS (we already use monowall with great success). I would like to keep it simple and continue similar setup, building two low power boxes with 1 hd (2Tb) each. Is low power atom mobo OK? Not sure about HDs? I've read on this site somebody mentioning more seagate ES2 as more reliable and better performing. How would those eco/green drives compare. We've been pretty happy with speed of Buffalo boxes and I don't want my users to notice any slowdown. Any suggestion?

  Read the article

• VMware NAS/iSCSI recommendations - smallish organization

  - by Bubnoff

  I have two VMware servers - ESX + ESXi. Two backup NAS boxes. The current NAS boxes are low-cost and unsuitable for running VMs from. Support NFS only. Slow. My plan is to have a dedicated iSCSI/NAS for storing and running VMs. Two additional low-cost boxes for backup. I'm looking for advice regarding 2 things really: Recommendations as far as VMware architecture/design for a smaller organization. Less than 20 Virtual Machines. 2 servers + 2 x 1.5 terabyte backup NAS boxes. A good NAS/iSCSI box with your recommendation on RAID config ...I would go with 6 or better. I'm trying to design an installation that is both fast and reliable/redundant. If you have any experiences to share or your current configuration including network design ( switches, fiber ...etc ), I will be enormously thankful. I'm not married to this idea, so if you have a design not using iSCSI NAS boxes ...let er rip. Cost? Can we stay around $5,000 ( on top of already stated components )? Links to info are welcome also. Thanks for reading! Bubnoff

  Read the article

• ASP.NET Session State SQL Server 2008 R2 Freezes with High CPU Usage

  - by jtseng

  Our ASP.Net website uses SQL Server as the session state provider. We currently host the database on SQL Server 2005 since it does not play well on 2008 R2. We would like to know why, and how to fix it. hardware setup Our current session state server has SQL Server 2005 with the files hosted on a single local disk. It is one of our oldest servers since it has served us well, and we never felt the need to upgrade it. The database is about 2 GB holding 6000 sessions. (The sessions are a little big, but we need it.) We have another server with SQL Server 2008 R2 with a much faster CPU, much more RAM, and a much faster hard disk. situation One day, we have a huge surge in traffic. The transaction log growth on SQL Server freezes the server for 10's of seconds, allowing only a few requests through in minutes. So we load up the new server with ASPState with very large data and log files and point all of our applications to the new server. It chugs along fine for about 5 minutes, and then the CPU usage jumps up to 50% of the 16 cores that Standard Edition can use and freezes for 10's of seconds at a time. The files do not record any autogrowth events. The disk queue is nice and low. RAM usage is low. CPU usage on our old server has never been higher than 5%. What happened on the new server? Alternatively, I would like to hear success stories with ASP.NET session state server running on SQL Server 2008 R2 with an average write load of 30MB/sec with bursts up to 200MB/sec.

  Read the article

• Hibernate between OS X and Bootcamp Win 7

  - by Willem

  Wouldn't it be great if someone wrote a guide or an app which allowed you to switch instantly between OS X and Windows using Hibernate in both OS:s? Windows 7 already has an option "Hibernate" which allows you to boot back to your OS X partition, but OS X does not exactly offer the same. However, there are possibilities here. It seems that the recent Mac's have 3 different kinds of sleeping mode: Sleep: Low power consumption, RAM still active. Legacy Safe Sleep: No power consumption(?), writes RAM to disk and shuts down (is this the same as Hibernate?) Safe Sleep: Writes RAM to disk and enters sleep mode. If battery level drops too low it goes into Hibernate (is this Hibernate the same as #2 in this list? This is the Hibernate I will be referring to int he rest of this post) It seems that I am unable to force my MacBook Pro (Late 2011) OS X 10.7.3 into a true hibernate using either command line or apps that are supposed to do this. I believe the Mac should show that white loading bar whilst waking up if it was truly put into hibernate (which it does not). But I can get this white bar to show by letting my battery level drop to 0% so there is obviously a system function for it (obviously, duh! :). When Win 7 goes into hibernate it shuts down completely and you can then boot into OS X on startup. On OS X however, hibernate forces you to wake up into OS X. Can you hack this so that you're allowed to select boot partition after OS X hibernates? Would it be possible to use the true hibernate system functionalities of Win 7 and OS X to create a kind of instant switching between the two? Imagine this on a quick SATA-3 SSD like my 180GB Intel 520. Thanks / Willem

  Read the article

• Looking to get a small server – need web, PHP, PostgreSQL.

  - by Javawag

  Hi all! I'm looking to get a cheap (low end) server to serve web pages (xHTML/PHP), but I also need to be able to set up PostGreSQL on the system too. Ideally the server would have low power consumption, run Linux (I prefer Mac OS X but a Mac Mini, although the size I'm looking for, is too much money!) and be around £100 (~$160US). EDIT: Just to make it clearer, I'm looking to purchase the server hardware myself – but I want something about Mac Mini sized. I don't want to pay for hosting! Also, quick question – if it's to serve web pages from my home (standard ISP connection, no static IP!), what do I need in place to get this working. I'm guessing I would sign up with some service like no-ip, and register a domain to point to my no-ip address (then install the no-ip software on the server to update that with the current IP). I know the idea of running a server behind a normal ISP connection isn't very elegant, but I'd prefer to have the server where I can see it then pay over the odds for a hosting service where I have little to no control over what happens. Also, I could write my own server software for apps/etc to connect to as well. Anyways I'm rambling! What do you guys think?! Javawag

  Read the article

• High fan speed with no reason

  - by Klaus

  For a few weeks, the fans of my Lenovo B590 laptop, running on Xubuntu 14, turn to high speed a few minutes after it is turned on. The fans won't speed down until I turn the computer off. This is quite strange, since This didn't happen before The temperatures are quite low (are they ?) $sensors Adapter: Virtual device temp1: +36.0°C (crit = +88.0°C) temp2: +30.0°C (crit = +126.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +37.0°C (high = +72.0°C, crit = +90.0°C) Core 0: +34.0°C (high = +72.0°C, crit = +90.0°C) Core 1: +31.0°C (high = +72.0°C, crit = +90.0°C) thinkpad-isa-0000 Adapter: ISA adapter fan1: 0 RPM pkg-temp-0-virtual-0 Adapter: Virtual device temp1: +37.0°C $sudo hddtemp /dev/sda /dev/sda: ST500LT012-9WS142: 33°C The computer is under low load: top - 08:30:15 up 16 min, 2 users, load average: 0.28, 0.23, 0.23 Tasks: 197 total, 1 running, 196 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.8 us, 0.5 sy, 0.0 ni, 98.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 3607944 total, 1973956 used, 1633988 free, 99660 buffers KiB Swap: 3744764 total, 0 used, 3744764 free. 789936 cached Mem The BIOS is up to date (and there are no fan settings in it) The fan is clean and dust-free Why would the BIOS turn the fans to high speed where there seem to be no reason for that ? It seems that we cannot control the fan manually with this model, so I guess the only solution is to understand why this happens.

  Read the article

• Disk Activity Alert Windows SBS 2003 on Dell PowerEdge 830 with Raid

  - by Ron Whites

  Background: I have a Dell PowerEdge 830 Server running Windows SB Server 2003. It has 4gbs of RAM and a ATA CERC SATA 6CH controller with 3 160gb drives in a Raid 5 configuration. The Problem I am seeing Admin ---"Disk Activity Alert on Server" emails These often occur when disk backups, de-frag or high disk usage is going on. Generally the server isn't over stressed. The Disk Alert emails say in part ... The following disk has low idle time, which may cause slow response time when reading or writing files to the disk. Disk: 0 C: F: D: Review the Disk Transfers/sec and % Idle Time counters for the PhysicalDisk performance object. If the Disk Transfers/sec counter is consistently below 150 while the % Idle Time counter remains very low (close to 0), there may be a problem with the disk driver or hardware. The Questions I have: With what utility can I review the Disk Transfers/sec and Idle Time? It appears there is no utility for that on the server! I think I may need to download a very large (two DVD) Dell "OpenManage" utility to be able to monitor the raid system and see what is a problem is that true?

  Read the article

• Why does apache httpd tell me that my name-based virtualhosts only works with SNI enabled browers (RFC 4366)

  - by Arlukin

  Why does apache give me this error message in my logs? Is it a false positive? [warn] Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366) I have recently upgraded from Centos 5.7 to 6.3, and by that to a newer httpd version. I have always made my ssl virtualhost configurations like below. Where all domains that share the same certificate (mostly/always wildcard certs) share the same ip. But never got this error message before (or have I, maybe I haven't looked to enough in my logs?) From what I have learned this should work without SNI (Server Name Indication) Here is relevant parts of my httpd.conf file. Without this VirtualHost I don't get the error message. NameVirtualHost 10.101.0.135:443 <VirtualHost 10.101.0.135:443> ServerName sub1.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost> <VirtualHost 10.101.0.135:443> ServerName sub2.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost>

  Read the article

• Apache suddenly very slow on http and faster on https

  - by hsnm

  Background: I have Apache 2 running on ubuntu. There is a low usage on it and mostly being accessed for a web service URL from mobile apps. It was working fine until I installed SSL certificates. I now have both http and https. When I access the server using https, I get a fairly quick response (but probably not as fast as before). When I use http, it's so slow. What I tried: From this post: I curl localhost from the host and it takes some time, meaning there is no routing issue. The server runs on Amazon EC2 instance and is managed by me only. Also: I see that Apache once running, creates the maximum number of processes it is allowed to, which was not the case before. I lowered the MaxClients to 20 and I think I'm getting faster responses but it still takes over a minute and I always have MaxClients Apache processes. dmesg returns many [ 1953.655703] TCP: Possible SYN flooding on port 80. Sending cookies. When I netstat I get many entries with SYN_RECV. Possibly a DDoS attack? From EC2's monitoring diagrams I see a pattern of high "Maximum Network In (Bytes)" since 2 days ago. By the way the server is still being tested, the actual traffic is very low and not consistent. I tried to go with this solution to limit incoming connections using iptables, still no luck, but I'm trying. Question: What could be the problem? Is this a DDoS attack?

  Read the article

• How to fix high Load_Cycle_Count laptop drive (TOSHIBA MK6006GAH in Vaio TX1XP)?

  - by Sam Brightman

  Hoping someone knows exactly what's going on here. It seems this drive has some combination of aggressive power saving settings and Ubuntu defaults that has massively increased the Load_Cycle_Count for the drive: https://wiki.ubuntu.com/DanielHahler/Bug59695 So the drive is now so slow that it cannot boot because it takes long enough to access the data that the kernel will not recognise it properly. I'm not worried about the data on the drive, but would really like to keep the laptop functioning. There is some indication that this is possible because the figure is still low 200,000s and most drives supposedly go to 600,000. Additionally, SMART tests pass and consider the drive healthy and without errors. But the really surprising thing was when I ran mhdd... Every single read came up red (slow) until I pressed 'R' for reset drive. I noticed the next read was normal speed, so held down 'R'. Magically the drive read perfectly for as long as I held the key BUT resumed slow (and noisy) seeking/reading after releasing. I don't think the source code to mhdd is available, so I'm not exactly sure what this means (besides, I don't know enough low-level HDD stuff either). It seems like the drive should be able to work, but is stuck trying to power save or something. There are no BIOS options on the laptop. Does anyone know how I can stop the drive from doing extremely slow/noisy operations like this? Or is constantly resetting the drive also damanging, and only causing it to work well by luck (i.e. not a suggestion that it's fixable)?

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >