Search Results

Search found 28222 results on 1129 pages for 'machine config'.

Page 430/1129 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• HSphere - Only sees Apache 2 Test Page after forced shutdown?

  - by Darkwoof

  Hi, I have a dedicated server running on a Dell PowerEdge 850 with CentOS 4.4 and HSphere 3.0 Patch 6 colocated at a datacenter. Last night my hosting company had to schedule a change in the power bar, and I gave the go ahead for them to shut down the server and bring it up when they are done. Since they do not have admin access to the machine, I suppose they did a forced shutdown. When the machine was brought up, I found that all my domains (and sub-domains) are now pointing to an "Apache 2 Test Page" instead of the pre-configured sites that were running prior to the shutdown. This apparently only affects the standard sites running on port 80 - my Webmin instance running at port 1000 is still accessible for example, as well as my HSphere control panel running at port 8080. I've checked the config settings using the HSphere UI for each of the sites, and didn't find anything wrong. I've also tried rebooting the server via SSH, which does not rectify the problem. I've previously done reboots with no issues; the sites would just come right back up when its done, but not this time. I'm guessing some configuration file got corrupted or overwritten this time? Anyone with experience with HSphere and can provide some advice on what's happened and how to solve it? Thanks. (I do not have an active support agreeement for HSphere since Parallels took over and increased the min. license to 200. I only had 25 license for use by family and friends.) Thanks in advance.

  Read the article

• How to setup bindings for development IIS 7.5 with lot of sites

  - by Antonio Bakula

  I am a programmer in a small ASP.NET shop with very little expirience in server administration, and I have to setup IIS 7.5 to host lot of sites on newly installed windows server 2008 R2, these sites are test "clones" for sites on "real" web server and they should be accessible only in local network (domain). Developers should add new sites for our new customers. Project managers use this server to check progress and test new sites and new features, QA people have to have access to this site and test before we copy it to the "real" web server. Developers only have access to IIS console, in fact they can use RDP to test server with their developer domain credentials and permissions, also developers are local admins on that machine (tester). On our previous server I used different port numbers for each site. That worked but don't like this solution, I would prefer to use subdomains. But here are the problems: manually adding DNS records is not an option because we do not wont that developers have to administer domain DNS server, and currently this had to be done with domain administrator credentials. Is there a some way to add DNS record automatically ? I tried to add DNS record for subdomains on test server with wildcard (*.tester) and that seems to work for some time but that change coused some bad problems in our domain network and admin forbid me to mess with DNS, he said that I have to add DNS record for every subdomain manually and that I can not use wildcards, and there is nothing that I can do about it, mainly for "politicall" reasons :( obviously our admin is pretty much uncooperative, outsorced from different organization and I can't do anything about that. can I add another DNS server on that machine ? What must be setup on clients machines to "tell" them to use domain DNS server and tester domain server ? So please I need someone to give me some advice, what should I do ? Is different port numbers only option left ? Thanks !

  Read the article

• Remote Desktop Services Licensing - Does server have to have a RDS role?

  - by transistor1

  I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

  Read the article

• Creating a fallback error page for nginx when root directory does not exist

  - by Ruirize

  I have set up an any-domain config on my nginx server - to reduce the amount of work needed when I open a new site/domain. This config allows me to simply create a folder in /usr/share/nginx/sites/ with the name of the domain/subdomain and then it just works.™ server { # Catch all domains starting with only "www." and boot them to non "www." domain. listen 80; server_name ~^www\.(.*)$; return 301 $scheme://$1$request_uri; } server { # Catch all domains that do not start with "www." listen 80; server_name ~^(?!www\.).+; client_max_body_size 20M; # Send all requests to the appropriate host root /usr/share/nginx/sites/$host; index index.html index.htm index.php; location / { try_files $uri $uri/ =404; } recursive_error_pages on; error_page 400 /errorpages/error.php?e=400&u=$uri&h=$host&s=$scheme; error_page 401 /errorpages/error.php?e=401&u=$uri&h=$host&s=$scheme; error_page 403 /errorpages/error.php?e=403&u=$uri&h=$host&s=$scheme; error_page 404 /errorpages/error.php?e=404&u=$uri&h=$host&s=$scheme; error_page 418 /errorpages/error.php?e=418&u=$uri&h=$host&s=$scheme; error_page 500 /errorpages/error.php?e=500&u=$uri&h=$host&s=$scheme; error_page 501 /errorpages/error.php?e=501&u=$uri&h=$host&s=$scheme; error_page 503 /errorpages/error.php?e=503&u=$uri&h=$host&s=$scheme; error_page 504 /errorpages/error.php?e=504&u=$uri&h=$host&s=$scheme; location ~ \.(php|html) { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_intercept_errors on; } } However there is one issue that I'd like to resolve, and that is when a domain that doesn't have a folder in the sites directory, nginx throws an internal 500 error page because it cannot redirect to /errorpages/error.php as it doesn't exist. How can I create a fallback error page that will catch these failed requests?

  Read the article

• How to prevent an SSD from disappearing from BIOS

  - by Midimatt

  I've only recently upgraded my old machine to a new one with a brand new 60gb SSD as my boot drive and a 1TB main drive. Paranoid about completely breaking my SSD, I read up on a lot of issues that I needed to watch out for, including making sure AHCI was turned on and trim enabled. PC has been working fine for a few weeks now, until today. My wife was watching some TV on the machine when it started to act strange and eventually blue screened. She rebooted and the boot mgr was missing. When I got home from work I checked the BIOS and the drive had disappeared. I panicked and looked up some possible fixes, and I discovered a large amount of people having problems with the drive firmware, especially on OCZ Vertex and Agility drives, and my drive is an Agility 3 drive. The problems included blue screens followed by missing drives, and a solution was to reset the CMOS and try again. This worked, and now everything seems to be working fine. My question is, is there any way to prevent this from happening? Am I missing a setting for my SSD? All of the posts I found were from early to mid-2011 nothing for the end of 2011 to 2012. So I am wondering if I've missed anything. EDIT: Checked my drives firmware and it is 2.15, which has had issues reported by users.

  Read the article

• Euro character messed up during FTP transfer

  - by djechelon

  My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• What is the risk of introducing non standard image machines to a corporate environment

  - by Troy Hunt

  I’m after some feedback from those in the managed desktop or network security space on the risks of introducing machines that are not built on a standard desktop image into a large corporate environment. This particular context relates to the standard corporate image (32 bit Win XP) in a large multi-national not being suitable for a particular segment of users. In short, I’m looking at what hurdles we might come across by proposing the introduction of machines which are built and maintained by a handful of software developers and not based on the corporate desktop image (proposing 64 bit Win 7). I suspect the barriers are primarily around virus definition updates, the rollout of service packs and patches and the compatibility of existing applications with the newer OS. In terms of viruses and software updates, if machines were using common virus protection software with automated updates and using Windows Update for service packs and patches, is there still a viable risk to the corporate environment? For that matter, are large corporate environments normally vulnerable to the introduction of a machine not based on a standard image? I’m trying to get my head around how real the risk of infection and other adverse events are from machines being plugged into the network. There are multiple scenarios outside of just the example above where this might happen (i.e. a vendor plugging in a machine for internet access during a presentation). Would a large corporate network normally be sufficiently hardened against such innocuous activity? I appreciate the theory as to why policies such as standard desktop images exist, I’m just interested in the actual, practical risk and how much a network should be protected by means other than what is managed on individual PCs.

  Read the article

• safely remove webserver from nginx backent pool?

  - by Dean Hiller

  We have 4 webservers behind nginx being hit with 262 events/second. I would like to tell nginx to stop sending requests to that server. If I remove the server from the file and reload the file, aren't all requests in process dropped on the floor then as nginx no longer knows that server. What can I add to the config so it slowly drops that server out of the pool and I can wait for current requests to complete.

  Read the article

• Help with routing table

  - by user68752

  I have tried to find the answer to my question but not really found a clean and easy solution. I have a box (Ubuntu headless 10.04.1 server, with one Ethernet port) on LAN behind a router (running m0n0wall), that I have successfully installed a PPTP device (ppp0) on, this is working flawlessly (following this link) The thing is I want this box to route all it's internet traffic through the VPN tunnel (ppp0 device) but also being able to access the local LAN on 192.168.1.* subnet. I've succeeded a bit with this, but my problem right now is that I have port forwards (e.g. SSH) done in the m0n0wall pointing to this specific box which forces me to do "add routes" to all boxes that want to access this machine through this specific port. For instance a machine with ip xyz.xyz.xyz.xyz needs to have a static route setup in the routing table on the box to be able to access the box. This is the result of route -n xxx.xxx.137.2 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 xxx.xxx.137.2 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 yyy.yyy.0.0 192.168.1.1 255.255.0.0 UG 0 0 0 eth0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 Where xxx is the IPs provided from VPN server. yyy.yyy.0.0 is a net that i want to have access to the box, without this I can't access the box from outside the LAN (via port-forwards done in router software, m0n0wall) is there away round this ugly solution?

  Read the article

• Bizarre client IP switch-up on VPN

  - by B. VB.

  Let A.B.C.D be the public IP of my VPN server. Let W.X.Y.Z be the IP of the client before it connects to the VPN. My VPN server's IP address on the LAN in 10.8.0.1, and the client is 10.8.0.6. I also run a webserver on the same machine hosting the VPN. On it is a simple webpage that performs the exact same thing as whatismyip.org (i.e., simply prints the IP of the requester) Let me illustrate the scenario for you. In a Chrome window I have three tabs, what I have in parenthesis is the URL: Tab 1 (http://whatismyip.org): A.B.C.D This is what I expect to see. It's the public IP of the VPN server. Tab 2 (http://10.8.0.1): 10.8.0.6 ok, looks expected. They are behind the same LAN now. Tab 3 (http://A.B.C.D) W.X.Y.Z WTF?? Basically, if I access the webserver while tunneled, in shows the IP address of my machine PRIOR to tunelling! Remember, tab2 and tab3 are the same webpage. Why does Tab3 not show the client IP as it's own IP (i.e., show A.B.C.D)??? I hope this question is clear, thanks in advance!

  Read the article

• Can't connect to Gmail server via Mail.app in Mac OS X 10.6.3

  - by Johnny

  I've added my gmail account to Mail.app It worked find in previous days, and downloaded thousands of previous mails. But now, it can't connect to gmail server for days. What's the matter here? Here is my config in account setting: Account Type: Gmail IMAP Email Address: [email protected] Incoming Mail Server: imap.gmail.com User Name: [email protected] Password: xxxxxx And also, is there any means that I can view the transaction log of Mail.app? Maybe there I can find more information.

  Read the article

• Hibernate & Sleep broken after IE 9 RTM installation in Windows 7 x64.

  - by AKa

  I have a question about hibernation. I installed Internet Explorer 9 RTM x64 on my Windows 7 x64 SP1 desktop machine. After this, computer don't entry the hibernation or (hybrid) sleep state properly. After I hibernate the computer the monitor become blank screen and the keyboard and mouse are inactive. But the machine is still running and there isn't any possibility to switch them off as only with power button. But this is recognized on next start as ineligible because of log entry with message “The previous system shutdown at xx:xx:xx on ?xx.?xx.?x was unexpected“ and menu with safe mode option. I’m clearly not sure if it has something to do with Internet Explorer installation, but I’m definitely guaranteed that before of this I never had some problems with hibernation or (hybrid) sleep. In Windows logs isn’t something suspect. I switched the hibernation off and on, installed new drivers for mainboard, graphic and network card, checked the hard disk, nothing was helpful. This is really sad, beacuse I don't like to switch the computer completely off because it takes longer to boot. Any suggestions?

  Read the article

• What are the differences between the "generic" and "server" kernel images provided by Ubuntu?

  - by dcrosta

  In particular, I'm wondering if there are any patches or config adjustments made to the disk cache size in the server edition. I'm running on a small system (256M RAM), and would like to experiment with keeping the disk cache size smaller so that there's more memory available for applications. I've found this page at Ubuntu's website, which neither answers my questions nor is about the 9.04 release.

  Read the article

• File corruption (bad checksums) in large files copied to VMware guest

  - by AllanA

  In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

  Read the article

• Application Screen Repainting Issues

  - by Jeff Sheldon

  I have this issue lately at work. It drives be nuts, and I finally stopped to ask this question. It's quite often that an application I've been running just randomly fails to repaint itself for a while, usually in the editor screen. I most often see this occurring with Expression Web, Visual Studio 2008/2010 and SQL Server Management studio. These applications are what I work in the most, so I'm not surprised to mostly see it here. But I was curious if anyone else had a solution for this. I've tried: Reboots. The screen shot below is about 10 minutes after a reboot. New Video Drivers. This machine is running a Nvidia Quadro NVS 290 video card with the latest drivers. Closing other applications, this is the only thing running right now. As far as hardware, this machine has Dual Quad-Core Xeon 2.83ghz Processors, with 10 gigs of memory, running Windows XP SP3 64bit. Any help would be great. JNK EDIT: Per comments from deleted (wrong) answer: I'm running dual monitors. Set it to single display, still occurred. Rebooted, and tried it again, and it still occurred. Switched it back to dual screen. My resolution is only 1400x900 on each.

  Read the article

• 3-4 old computers = general purpose cluster?

  - by TheLQ

  I have 3 old computers lying around right now running a P2 at 800 MHz(?), Intel Mobile 1.6 GHz, AMD Athlon XP 2000+ at 1.66 GHz, and (might not use this) P4 at 2.7 GHz, all with 512 MB Ram, and am considering clustering them together for fun/knowledge. They would be running an undecided version of linux, preferably ubuntu based. The issue is what I want to use it for: general computing and occasional video encoding. By general computing I mean day to day tasks. However I'm not sure if every program started by a single X session is going to exist on the same machine, defeating the purpose of such a system. Will programs be split up or exist on one machine? Second, assuming this is running 100baseT ethernet (not sure if the PCI slot itself could handle Gigabit), would the speed of having a program exist over the network be an issue? It seems that the constant asking of various things in RAM would be quite slow. And before you say "buy another computer!", that's not the point of this question. I'm asking would it be usable, not necessarily practical. And yes I know, this is going to be extreamly power consuming.

  Read the article

• Custom settings with PHP on Nginx

  - by miki

  I have multiple websites setup using Nginx and Apache, but when I try to add a vhost based PHP directive using fastcgi_param PHP_VALUE , the value get added to all of my vhosts. Checking the value of the PHP parameter from PHP-CLI remain the actual one for whole server. e.g. I used fastcgi_param PHP_VALUE "memory_limit=512M" for a domain based nginx config, but it will be propagated to all domains on server. The 'php -i | grep memory_limit' show 128M though Not sure what I am missing

  Read the article

• How can I trick ssh to connect using different configurations based on current location?

  - by Sorin Sbarnea

  Here is the following use case: wanting to ssh server1 in 3 scenarios: server1 is on current network, go for it server1 is not on current network and you need to use a gateway (gw1) to access it, not a big problem as you can use ~/.ssh/config to define tunnelling for this you are on a network that does not allow you to access the first gw1, so you'll use gw2 for that. Desired outcome: be able to use the same command and be able to connect to the server.

  Read the article

• IIS 7: One Page Works, All Others Fail With "Error code: ssl_error_rx_record_too_long"

  - by Michael

  On my local machine, I have a second site bound to Port 81. Within that site is a certain page which I can browse from other machines with no problems, but all other pages fail with "Error code: ssl_error_rx_record_too_long". Each of the failing pages (as well as the lone working page), works with localhost. So, from any machine, local or remote: http://cmwmach01.mydomain.biz:81/RD/SS/SS.aspx (works) http://cmwmach01:81/RD/SS/SS.aspx (works) http://cmwmach01.mydomain.biz:81/RD/POV/SC.aspx (fails - gets changed to https) http://cmwmach01:81/RD/POV/SC.aspx (fails - gets changed to https) Everything works with localhost (locally, of course). I've tagged this question with SSL because, at one point, it would warn about an SSL cert issue (maybe this was self-signed at one point?), but now it doesn't. While there may be an issue around that, I don't see how this could cause the issue I am seeing (but, as I mention below, am I way out of my depth here). I am way out of depth here in trying to figure out why that one page works (or the others don't), so that I can make them all work. Any ideas?

  Read the article

• Redhat Linux password fail on ssh

  - by Stephopolis

  I am trying to ssh into my linux machine from my mac. If I am physically at the machine I can log in with my password just fine, but if I am sshing it refuses. I am getting: Permission denies (publickey,keyboard-interactive) I thought that it might be caused by some changes that I recently made to system-auth, but I restored everything to what I believe was the original format: #%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run. auth required pam_env.so auth sufficient pam_fprintd.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so But I still could not ssh in. I tried removing my password all together and that didn't seem to help either. It still asks and even entering an empty string (nothing) it still fails me out. Any advice?

  Read the article

• Advice on Auditing VPN Connections

  - by WhiteAdam

  I've inherited a network that is truly a mess and the VPN config is amazingly long with confusing group names and very little documentation. I am curious to see how others have gone about auditing these types of connections. Are there any forms out there? What information should I collect? I assume things like Customer, Department, Technical Lead, and etc. Thanks in advance for any advice on this nightmare.

  Read the article

• Shared External Drive Permission Issues

  - by connec

  So, say I share my system (C) drive through windows (E.g. properties -> Sharing -> Advanced Sharing -> Share this Folder). I can then access this drive at \\Comp\C on another networked computer - all is well. However, if I insert a removable (USB) disk, say "E", and proceed to share it the same way, when I attempt to access \\Comp\E (either directly or through browsing) I get an error: Windows cannot access \\Comp\E You do not have permission to access \\Comp\E. Contact your network administrator to request access. Now, the permissions (Advanced Sharing -> Permissions) are set with "Everyone" having read access (same as the internal drive), so this doesn't make a lot of sense. Also of note, I have an SSH server on my computer (through Cygwin) and even through SSH (logging in as an administrator user) I cannot access /cygdrive/e (although /cygdrive/c is accessible). As a final note, the drive is of course accessible on the host machine (E:\), and also at \\Comp\E on the host machine.

  Read the article

• Fans still running after shutdown after upgrade to Windows 8

  - by docaholic

  I'm running into a really annoying issue after upgrading from Windows 7 to Windows 8. I first noticed it during the initial (clean) install; when the installer tried to reboot, my machine (an acer aspire 4755G) just hung after the initial shutdown. That is, after the screen turns off, the power lights and fans are still running, and the machine itself doesn't restart. (I let it sit for a good 15 minutes, and it still didn't change) I managed to do a hard reset (power button for 5 seconds) and the install finished, but every shutdown/restart has been like that. Interestingly enough, hibernate works just fine. I've looked at other solutions where it said to use the bcdedit /set disabledynamictick yes and that didn't work. I also turned off the "Fast Boot" option in the power settings menu. That didn't work either. So far, the only option is to do the hard shut down by holding down the power button, but that proves to be horribly inconvenient. Any ideas on what's going on here?

  Read the article

• How do you permanently disable the 'This Connection is Untrusted' page on Firefox

  - by TheIronChef9

  I'm going insane. Can someone please help me to COMPLETELY DISABLE the 'This Connection is Untrusted' page on Firefox. Facts: I am running Firefox 23.0 on an Ubuntu machine (downloaded and installed ubuntu today) It is a work computer and I have to use my employer's proxy While visiting Webpages/webapps like Gmail or Google brings up the 'This Connection is Untrusted' page and I have to go through the whole tedious task of selecting 'I understand the Risks' and add Exceptions, etc. etc. The fact is, I don't care about the risks. I would rather this computer melt into the ground than have to see that page ever again. I want to dance naked in untrusted pages and not give a damn about the consequences. I just never want to see that page again. Ever. For some sites (eg. wikipedia), the css doesn't load and I end up seeing them in plain text. As a result these sites are completely useless. Wasted hours trying to solve this for stackoverflow.com. These issues happen on the Firefox on my Windows XP machine as well (also using the same proxy). I don't want to export/import certificates or create exceptions for every site that shows this bloody page. I just want this page gone. I don't want Firefox to tell me what's safe and what's not. Also, my system time and date are correct. I've also tried the lies on this page too with no good results. Edit: I've also tried the whole going into the Advance-Certificates-validation setup page and unchecked 'Use the Online Certificate Status Protocol (OCSP) to confirm the current validity of certificates' checkbox. Nothing happened even after restarting firefox or rebooting. I need help. Thanks.

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >