Search Results

Search found 11671 results on 467 pages for 'man pages'.

Page 430/467 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Sysadmin 101: How can I figure out why my server crashes and monitor performance?

  - by bflora

  I have a Drupal-powered site that seems to have neverending performance problems. It was butt-slow about 5 months ago. I brought in some guys who installed nginx for anonymous visitors, ajaxified a few queries so they wouldn't fire during page load, and helped me find a few bottlenecks in the code. For about a month, the site was significantly faster, though not "fast" by any stretch of the word. Meanwhile, I'm now shelling out $400/month to Slicehost to host a site that gets less than 5,000/uniques a day. Yes, you read that right. Go Drupal. Recently the site started crashing again and is slow again. I can't afford to hire people to come in, study my code from top to bottom, and make changes that may or may not help anymore. And I can't afford to throw more hardware at the problem. So I need to figure out what the problem is myself. Questions: When apache crashes, is it possible to find out what caused it to crash? There has to be a way, right? If so, how can I do this? Is there software I can use that will tell me which process caused my server to die? (e.g. "Apache crashed because someone visited page X." or "Apache crashed because you were importing too many RSS items from feed X.") There's got to be a way to learn this, right? What's a good, noob-friendly way to monitor my current apache performance? My developer friends tell me to "just use Top, dude," but Top shows me a bunch of numbers without any context. I have no clue what qualifies as a bad number or a good number in Top, or which processes are relevant and which aren't. Are there any noob-friendly server monitoring tools out there? Ideally, I could have a page that would give me a color-coded indicator about how apache is performing and then show me a list of processes or pages that are sucking right now. This way, I could know when performance is bad and then what's causing it to be so bad. Why does PHP memory matter? My apparently has a 30MB memory foot print. Will it run faster if I bring that number down? Thanks for any advice. I spent a year or so trying to boost my advertising income so I could hire a contractor to solve my performance woes. I didn't want to have to learn all this sysadmin voodoo. I'm now resigned to the fact that might not have a choice.

  Read the article

• Can't connect to smtp (postfix, dovecot) after making a change and trying to change it back

  - by UberBrainChild

  I am using postfix and dovecot along with zpanel and I tried enabling SSL and then turned it off as I did not have SSL configured yet and I realized it was a bit stupid at the time. I am using CentOS 6.4. I get the following error in the mail log. (I changed my host name to "myhostname" and my domain to "mydomain.com") Oct 20 01:49:06 myhostname postfix/smtpd[4714]: connect from mydomain.com[127.0.0.1] Oct 20 01:49:16 myhostname postfix/smtpd[4714]: fatal: no SASL authentication mechanisms Oct 20 01:49:17 myhostname postfix/master[4708]: warning: process /usr/libexec/postfix/smtpd pid 4714 exit status 1 Oct 20 01:49:17 amyhostname postfix/master[4708]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Reading on forums and similar questions I figured it was just a service that was not running or installed. However I can see that saslauthd is currently up and running on my system and restarting it does not help. Here is my postfix master.cf # # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup submission inet n - - - - smtpd -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp smtps inet n - - - - smtpd # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} And here is dovecot ## ## Dovecot config file ## listen = * disable_plaintext_auth = no protocols = imap pop3 lmtp sieve auth_mechanisms = plain login passdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } userdb { driver = sql } userdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } mail_location = maildir:/var/zpanel/vmail/%d/%n first_valid_uid = 101 #last_valid_uid = 0 first_valid_gid = 12 #last_valid_gid = 0 #mail_plugins = mailbox_idle_check_interval = 30 secs maildir_copy_with_hardlinks = yes service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } service lmtp { unix_listener lmtp { #mode = 0666 } } service imap { vsz_limit = 256M } service pop3 { } service auth { unix_listener auth-userdb { mode = 0666 user = vmail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0666 user = vmail group = mail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 0 vsz_limit = 64M } service managesieve { } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes protocol lda { mail_plugins = quota sieve postmaster_address = [email protected] } protocol imap { mail_plugins = quota imap_quota trash imap_client_workarounds = delay-newmail } lmtp_save_to_detail_mailbox = yes protocol lmtp { mail_plugins = quota sieve } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol sieve { managesieve_max_line_length = 65536 managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 } dict { quotadict = mysql:/etc/zpanel/configs/dovecot2/dovecot-dict-quota.conf } plugin { # quota = dict:User quota::proxy::quotadict quota = maildir:User quota acl = vfile:/etc/dovecot/acls trash = /etc/zpanel/configs/dovecot2/dovecot-trash.conf sieve_global_path = /var/zpanel/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/zpanel/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M #sieve_max_actions = 32 #sieve_max_redirects = 4 } log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log debug_log_path = /var/log/dovecot-debug.log mail_debug=yes ssl = no Does anyone have any ideas or tips on what I can try to get this working? Thanks for all the help EDIT: Output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 delay_warning_time = 4 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = localhost.$mydomain, localhost mydomain = control.yourdomain.com myhostname = control.yourdomain.com mynetworks = all newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES recipient_delimiter = + relay_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-relay_domains_maps.cf sample_directory = /usr/share/doc/postfix-2.2.2/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_use_tls = no smtpd_client_restrictions = smtpd_data_restrictions = reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = smtpd_use_tls = no soft_bounce = yes transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_alias_maps.cf, regexp:/etc/zpanel/configs/postfix/virtual_regexp virtual_gid_maps = static:12 virtual_mailbox_base = /var/zpanel/vmail virtual_mailbox_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_mailbox_maps.cf virtual_minimum_uid = 101 virtual_transport = dovecot virtual_uid_maps = static:101

  Read the article

• RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

  - by zhallett

  I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

  Read the article

• Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

  - by user250563

  First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

  Read the article

• Why would a PCI scan fail because of components that are not even installed?

  - by Brandon

  Recently a PCI scan was run against a web server and the result was a failure. Some of the issues could be fixed, however others simply make no sense to me. The machine was a clean install, there are only two things running, the .NET 3.5 website and the dotDefender web application firewall. However there are several errors similar to: Web server vulnerability Impact: /servlet/SessionServlet: JRun or Netware WebSphere default servlet found. All default code should be removed from servers. Risk Factor: Medium/ CVSS2 Base Score: 6.4 CVE: CVE-2000-0539 I'm not sure what this is, but I can't find anything on the server that looks anything like this. Web server vulnerability Impact: /some.php?=PHPE9568F35- D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests that contain specific QUERY strings. Risk Factor: Medium/ CVSS2 Base Score: 5.0 PHP is not installed. Trying to add that query string to any page does nothing because the application ignores it. And doing that phpVersion check results in a 404. Similar to this, there are dozens of errors related to JSP and Oracle that are also not installed. Web server vulnerability Impact: /admin/database/wwForum.mdb: Web Wiz Forums pre 7.5 is vulnerable to Cross-Site Scripting attacks. Default login/pass is Administrator/letmein Risk Factor: Medium/ CVSS2 Base Score: 4.0 There are several errors like this, telling me that Web Wiz Forums, Alan Ward A-Cart 2.0, IlohaMail, etc. are all vulnerable. These are not installed or referenced anywhere I can find. There are even references to pages that simply don't exist, like OpenAutoClassifieds. Can anyone point me in the right direction as to why these errors are showing up or where I might look to find these components if they are in fact installed? Note: This website and server are for a subdomain of the main website. The main website runs on a server that is running Apache/PHP, but I don't have access to that server. The report says the subdomain was the site being scanned, but is it possible for it to have scanned the main site as well?

  Read the article

• PHP app breaks on Nginx, but works on Apache

  - by rizon1990

  I want to migrate a PHP application from Apache to Nginx. The problem is that the App breaks, because the routing doesn't work anymore and I'm not exactly sure how to fix it. The PHP application includes some .htaccess files and I tried to convert those to Nginx. The first one is in the document root: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ public/ [L] RewriteRule (.*) public/$1 [L] </IfModule> The second one is in /public/ <IfModule mod_rewrite.c RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule ^(.*)$ index.php?url=$1 [PT,L] </IfModule> <IfModule !mod_rewrite.c> ErrorDocument 404 index.php </IfModule> The third and last one is: deny from all My nginx version of it looks like the following: #user nobody; worker_processes 1; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; keepalive_timeout 65; gzip on; server { listen 8080; server_name localhost; root /Library/WebServer/Documents/admin; location / { index index.php; rewrite ^/$ /public/ break; rewrite ^(.*)$ /public/$1 break; } location /public { if (!-e $request_filename){ rewrite ^(.*)$ /index.php?url=$1 break; } } location /library { deny all; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { root /Library/WebServer/Documents/admin; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } } The problem I face is that something that the routing is broken and just returns a 404 page instead. Hopefully someone has an idea and know how to fix it ;) Thanks EDIT I got it working with this config location /library { deny all; } location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { access_log off; rewrite ^(.*)$ /public/$1 break; } location / { rewrite ^/(.+)$ /index.php?url=$1 last; } I'm sure there are better solutions and I'm open for suggestions.

  Read the article

• Varnish 503 Guru Mediation errors with pfsense and healthy apache

  - by Fammy

  We are running a pfsense firewall / load balancer with varnish as service, In front of Fedora linux webservers running apache. We are getting intermittent 503 guru mediation errors. We are a bit stuck scratching our heads because it is not easily repeatable. The timeouts are set to 30s (connect and first byte) but yet the 503 page will show instantly, not after 30s. Then if you refresh immediately it may very well work instantly and sometimes for a 100 refreshes. The load average on the web servers is < 1, the DB server is < 3 (all servers (web, db, pfsense/varnish) are physical rather than VM. I would have thought if the timeouts were being hit then the 503 page would only appear after 30s am I mistaken? Also when an error happens there does not appear to be any corresponding error in apache's log files. This seems to affect pages as well as images, so it is possible to have the page load fine, and for 9/10 images on the page to be fine but 1 not work An example of the varnish debug is below. It says no backend connection but I can't figure out why, if the load was high on apache I could understand it being flaky The machines are on the same gig ethernet lan 21 ReqStart c *IP-REMOVED* 33418 1274368062 21 RxRequest c GET 21 RxURL c /fashion/ 21 RxProtocol c HTTP/1.1 21 RxHeader c User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.5) Gecko/2008121622 Fedora/3.0.5-1.fc10 Firefox/3.0.5 21 RxHeader c Host: *ourdomain.com* 21 RxHeader c Accept: */* 21 RxHeader c Accept-Encoding: deflate, gzip 21 VCL_call c recv lookup 21 VCL_call c hash 21 Hash c /fashion/ 21 Hash c *ourdomain.com* 21 VCL_return c hash 21 VCL_call c miss fetch 21 FetchError c no backend connection 21 VCL_call c error restart 21 VCL_call c recv lookup 21 VCL_call c hash 21 Hash c /fashion/ 21 Hash c *ourdomain.com* 21 VCL_return c hash 21 VCL_call c miss fetch 21 FetchError c no backend connection 21 VCL_call c error restart 21 VCL_call c recv lookup 21 VCL_call c hash 21 Hash c /fashion/ 21 Hash c *ourdomain.com* 21 VCL_return c hash 21 VCL_call c miss fetch 21 FetchError c no backend connection 21 VCL_call c error deliver 21 VCL_call c deliver deliver 21 TxProtocol c HTTP/1.1 21 TxStatus c 503 21 TxResponse c Service Unavailable 21 TxHeader c Server: Varnish 21 TxHeader c Content-Type: text/html; charset=utf-8 21 TxHeader c Content-Length: 384 21 TxHeader c Accept-Ranges: bytes 21 TxHeader c Date: Wed, 11 Apr 2012 10:36:17 GMT 21 TxHeader c X-Varnish: 1274368062 21 TxHeader c Age: 0 21 TxHeader c Via: 1.1 varnish 21 TxHeader c Connection: close 21 TxHeader c X-Cache: MISS 21 Length c 384 21 ReqEnd c 1274368062 1334140577.449995041 1334140577.450334787 1.794108152 0.000282764 0.000056982

  Read the article

• How to force Debian to boot new Kernel?

  - by ThE_-_BliZZarD

  I'm running Debian 6, Debian GNU/Linux, with Linux 2.6.32-5-amd64 under Grub2 ( 1.98+20100804-14+squeeze1) on a remote system (no possibility to view the pre-boot messages). I compiled and installed a new kernel, but I can not get it to boot. What I have done: Installed the packages via: dpkg -i linux-headers-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb linux-image-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb This updated the Grub configuration. My /boot/grub/grub.cfg now contains: menuentry 'Debian GNU/Linux, with Linux 3.5.3.20120914-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 3.5.3.20120914-amd64 ...' linux /vmlinuz-3.5.3.20120914-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-3.5.3.20120914-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } I used grub-set-default "Debian GNU/Linux, with Linux 2.6.32-5-amd64" to set the old kernel as default and then grub-reboot "Debian GNU/Linux, with Linux 3.5.3.20120914-amd64" to boot into the new kernel once. After update-grub I rebooted the system, but everytime it comes back up with the old kernel (2.6). I tried setting the new one as default (grub-set-default 0, update-grub, reboot) but, still the old one. The Syslogs contain NO hint whatsoever about trying to boot the new kernel - only the old one. Would there be any hints regarding problems with a kernel? Is there a way to enable debug-logging in grub? What am I doing wrong? How can I force the system to boot the new kernel? Edit: Hardware of remote machine. CPU cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 5 model name : AMD Athlon(tm) II X4 605e Processor stepping : 3 cpu MHz : 2294.898 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt bogomips : 4589.77 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate (copied only the first, 3 more follow) The server is a Fujitsu PRIMERGY MX130 S1.

  Read the article

• Mercurial browser on Windows 2003 takes several refreshes before displaying repositories

  - by Tim Murphy

  When attempt to browse my Mercurial repositories it usually takes several refreshes before the repository list is displayed. The configuration is as follows: Windows Server 2003 (Dedicated machine hosted by http://www.server4you.com/. Site has anonymous password protection with self-signed SSL. Mercurial 1.5.3 Python 2.6.5 Python for Windows 32 extensions 214 py2.6 isapi-wsgi 0.4.2 The repositories are being served via ISAPI using the standard hgwebdir_wspi.py file (copy to follow). Other problems with the repository server: Before doing a clone/push/etc I have to browse the repositories first otherwise hg on my local machine can not locate the site. I have one a repository with a large changeset that after a minute or so throw error "abort: error: An existing connection was forcibly closed by the remote host". Will be asking another question for this problem. What can I do to start tracking down this problem? hgwebdir_wsgi.py # Configuration file location hgweb_config = r'C:\Public\Mercurial\WebSite\hgweb.config' # Global settings for IIS path translation path_strip = 0 # Strip this many path elements off (when using url rewrite) path_prefix = 0 # This many path elements are prefixes (depends on the # virtual path of the IIS application). import sys # Adjust python path if this is not a system-wide install #sys.path.insert(0, r'c:\path\to\python\lib') # Enable tracing. Run 'python -m win32traceutil' to debug if hasattr(sys, 'isapidllhandle'): import win32traceutil # To serve pages in local charset instead of UTF-8, remove the two lines below import os os.environ['HGENCODING'] = 'UTF-8' import isapi_wsgi from mercurial import demandimport; demandimport.enable() from mercurial.hgweb.hgwebdir_mod import hgwebdir # Example tweak: Replace isapi_wsgi's handler to provide better error message # Other stuff could also be done here, like logging errors etc. class WsgiHandler(isapi_wsgi.IsapiWsgiHandler): error_status = '500 Internal Server Error' # less silly error message isapi_wsgi.IsapiWsgiHandler = WsgiHandler # Only create the hgwebdir instance once application = hgwebdir(hgweb_config) def handler(environ, start_response): # Translate IIS's weird URLs url = environ['SCRIPT_NAME'] + environ['PATH_INFO'] paths = url[1:].split('/')[path_strip:] script_name = '/' + '/'.join(paths[:path_prefix]) path_info = '/'.join(paths[path_prefix:]) if path_info: path_info = '/' + path_info environ['SCRIPT_NAME'] = script_name environ['PATH_INFO'] = path_info return application(environ, start_response) def __ExtensionFactory__(): return isapi_wsgi.ISAPISimpleHandler(handler) if __name__=='__main__': from isapi.install import * params = ISAPIParameters() HandleCommandLine(params) hgweb.config [paths] / = C:\Public\Mercurial\Repositories\* [web] allow_archive = bz2 gz zip ; Allows archive downloads. allow_push = ######## ; Users that are allowed to push.

  Read the article

• Is Gmail Being Blocked by my ISP?

  - by james

  EDIT: I thought I pinpointed the problem. Just now I tried to go to the firefox addons page which uses https and gmail also uses https. So I thought I am unable to load https pages on this computer. So I went to a bank site which uses https but that loads just fine. Sigh.... I asked this over at superuser but they weren't able to help, so I was hoping the sysadmins here will be able to advise as to what's wrong. Although the issue here is with a PC and not a server it still deals with networking so I hope it's not too irrelevant. The Issue: I have a desktop on which I cannot access Gmail and also youtube sign in (I believe since youtube is owned by google they both use the same sign in system). On other computers that uses the same connection via a wireless router I can access both gmail and youtube sign in just fine. On this computer which doesn't have a wireless card and so I have to connect via Ethernet cable (connected to a USB converter since the Ethernet port doesn't work anymore) I can access all sites and services including things like aol and hotmail. But only when it comes to gmail, do I get complete and utter throttling. I even turned off my AV ad Firewall momentarily and no luck. The gmail log in page starts to load and by mid point it just stays there loading and loading and loading... never ends. I tried everything, I reset the modem and router multiple times. I reinstalled my operating system from a vista to a windows 7 hoping that a complete reinstall would solve the issue, but no luck. And yes, I am going to call my ISP but not to solve this issue, but to cancel them. I want to upgrade to cable from DSL anyway. I didn't mention my ISP because I'm not sure if that is within the rules (if it's okay some one let me know and I will). P.S. All this happened one day, before that gmail was perfectly accessible in this computer. I can't remember anything special happening on that day prior to this. The only thing I can think of is, my ISP or Google itself is blocking this computer based on it's mac address, but I don't know if that's even done. Additional info: PC: Windows 7 Ultimate 32 bit Connection Type: DSL Connecting Medium: Ethernet cable via USB converter I should mention I can access gmail and youtube just fine through a IP proxy service.

  Read the article

• Trouble using gitweb with nginx

  - by Rayne

  I have a git repository in a directory inside of /home/raynes/pubgit/. I'm trying to use gitweb to provide a web interface to it. I use nginx as my web server for everything else, so I don't really want to have to use another just for this. I'm mostly following this guide: http://michalbugno.pl/en/blog/gitweb-nginx, which is the only guide I can find via google and is really recent. fcgiwrap apparently isn't in Lucid Lynx's repositories, so I installed it manually. I spawn instances via spawn-fcgi: spawn-fcgi -f /usr/local/sbin/fcgiwrap -a 127.0.0.1 -p 9001 That's all good. My /etc/gitweb.conf is as follows: # path to git projects (<project>.git) #$projectroot = "/home/raynes/pubgit"; $my_uri = "http://mc.raynes.me"; $home_link = "http://mc.raynes.me/"; # directory to use for temp files $git_temp = "/tmp"; # target of the home link on top of all pages #$home_link = $my_uri || "/"; # html text to include at home page $home_text = "indextext.html"; # file with project list; by default, simply scan the projectroot dir. $projects_list = $projectroot; # stylesheet to use $stylesheet = "/gitweb/gitweb.css"; # logo to use $logo = "/gitweb/git-logo.png"; # the 'favicon' $favicon = "/gitweb/git-favicon.png"; And my nginx server configuration is this: server { listen 80; server_name mc.raynes.me; location / { root /usr/share/gitweb; if (!-f $request_filename) { fastcgi_pass 127.0.0.1:9001; } fastcgi_index index.cgi; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } } The only difference here is that I've set fastcgi_pass to 127.0.0.1:9001. When I go to http://mc.raynes.me I'm greeted with a page that simply says "403" and nothing else. I have not the slightest clue what I did wrong. Any ideas?

  Read the article

• Some sites won't load on Ubuntu/Mint

  - by Or W

  I have a REALLY weird problem with either my network or my OS. Last week I've suddenly had difficulties loading some websites or even more odd some parts of different websites. For example, I could load gmail.com, login and view the list of emails in my inbox but when I clicked one of them it would just time out. Another example is http://www.ynet.co.il, I can view the home page but going into any one of the articles fails (times out). I've tried Chrome, Firefox and Opera, all fail the same way. If I take a URL of a page I cannot load via the browser and try to wget it though the console I get the file just fine. I've formatted my machine (Used to run Ubuntu 13.04) and installed Mint Linux this time, it worked fine for a few days and now, again, having the same exact issues. Important to note that I have other machines connected either directly or via Wi-Fi to the router and they are all working fine (two win7 machines and 1 raspberry pi). Another strange behavior is that I can ftp or ssh to remote machines but cannot send files via ftp (times out) even if I set passive mode ON and when using ssh I can do just about anything but I cannot paste text into the remote machine, for example if I nano a file on the remote machine and try to paste anything from my clipboard it freezes. What I've tried so far: Disable IPv6 on the networking admin (and on firefox disabling ipv6 on the about:config page) Changing the port and the network cable I went to the store and bought a new standalone PCIe network adapter Connected my win7 laptop using the same cable and router port (sites that were not working on my Mint are working just fine on the win7 machine) Loaded Mint from a livecd, got the same result Tried changing the MTU (was 1500, tried 1492) Some observations: When I clear my browser cache and go to facebook.com for example, the homepage loads but I fail to load any profile/group page. If I refresh facebook.com homepage a couple of times it stops and fails to load until I clear my browser cache. I changed the chrome cache folder permissions to 0777 but that did not help. When I run netstat -n I see A LOT of connections that are in 'FIN_WAIT' mode (I'm guessing that's when I try to refresh pages that are not working and timing out), I have no idea what it means or if it helps anyone figure out what's wrong. The sites that are not loading correctly are always that same, they don't vary or anything and they fail to load exactly the same way on all three browsers that I've tried. When I Googled 'Ubuntu some sites not loading' I see a huge amount of complaints just like mine, but none of them that I could find actually says what the problem is or how they fixed it. Technical stuff: netstat -n ps aux netstat -nr

  Read the article

• What presentation software suits my needs?

  - by claws

  Background: I'm teaching biology to 12th grade students. The syllabus I'm teaching is huge. I mean literally, very huge. There is a lot for students to remember. There are no less than 1000 facts (weird names, dates etc) for students to remember. They'll have to remember all of them, they don't have a choice. The notes I compiled for their learning itself is upto 80 printed pages(Just the bullet outline & facts). That's just one chapter. We have 34 chapters. Also my students are very hardworking, they study upto 8-10hrs per day (Yeah! we are from India :). So, I want to ensure maximum retaining by the students at each and every stage (Teaching & Learning). I'm trying to as many memory training techniques as possible. I'm trying to incorporate, mnemonics, strong visual aids (pictures, 3D-animations, real videos etc.), spaced repetition etc. I think MS powerpoint is not suitable for my needs: There are about 200 slides per chapter. Its very easy for students to get lost while teaching. Because the problem with powerpoint is that it gives facts (as bullets) but it doesn't exploit the association & organization (Concept Map) of the content, which helps students learn quickly. I found an amazing software called XMind. You can see the screenshot here. Problem is that it is not as powerpoint in terms of powerpoint. This software can be used for just for concept maps. In the above screenshot, each topic occupies a single slide. I have an Image/picture(Detailed huge picture) and about 5-10 bullet points and probably a video or an animation of somethings. And this XMind is not good at presenting, in terms that it doesn't allow me to set what to present after what. I want to present a top down view, with a slide for each topic. PS: I Don't like prezi.com. I tried but it simply is too confusing for my students. It zooms here and there. I didn't tried it but I've seen few presentations.

  Read the article

• Apache proxy pass in nginx

  - by summerbulb

  I have the following configuration in Apache: RewriteEngine On #APP ProxyPass /abc/ http://remote.com/abc/ ProxyPassReverse /abc/ http://remote.com/abc/ #APP2 ProxyPass /efg/ http://remote.com/efg/ ProxyPassReverse /efg/ http://remote.com/efg/ I am trying to have the same configuration in nginx. After reading some links, this is what I have : server { listen 8081; server_name localhost; proxy_redirect http://localhost:8081/ http://remote.com/; location ^~/abc/ { proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://remote.com/abc/; } location ^~/efg/ { proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://remote.com/efg/; } } I already have the following configuration: server { listen 8080; server_name localhost; location / { root html; index index.html index.htm; } location ^~/myAPP { alias path/to/app; index main.html; } location ^~/myAPP/images { alias another/path/to/images autoindex on; } } The idea here is to overcome a same-origin-policy problem. The main pages are on localhost:8080 but we need ajax calls to http://remote.com/abc. Both domains are under my control. Using the above configuration, the ajax calls either don't reach the remote server or get cut off because of the cross origin. The above solution worked in Apache and isn't working in nginx, so I am assuming it's a configuration problem. I think there is an implicit question here: should I have two server declarations or should I somehow merge them into one? EDIT: Added some more information EDIT2: I've moved all the proxy_pass configuration into the main server declaration and changed all the ajax calls to go through port 8080. I am now getting a new error: 502 Connection reset by peer. Wireshark shows packets going out to http://remote.com with a bad IP header checksum.

  Read the article

• CakePHP in a subdirectory using nginx (Rewrite rules?)

  - by lhnz

  I managed to get this to work a while back, but on returning to the cakephp project I had started it seems that whatever changes I've made to nginx recently (or perhaps a recent update) have broken my rewrite rules. Currently I have: worker_processes 1; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; server_name localhost; location / { root html; index index.php index.html index.htm; } location /basic_cake/ { index index.php; if (-f $request_filename) { break; } if (!-f $request_filename) { rewrite ^/basic_cake/(.+)$ /basic_cake/index.php?url=$1 last; break; } } location /cake_test/ { index index.php; if (-f $request_filename) { break; } if (!-f $request_filename) { rewrite ^/cake_test/(.+)$ /cake_test/index.php?url=$1 last; break; } } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server { listen 8081; server_name localhost; root /srv/http/html/xsp; location / { index index.html index.htm index.aspx default.aspx; } location ~ \.(aspx|asmx|ashx|asax|ascx|soap|rem|axd|cs|config|dll)$ { fastcgi_pass 127.0.0.1:9001; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } } The problem that I have is that the css and images will not load from the webroot. Instead if I visit http://localhost/basic_cake/css/cake.generic.css, I get a page which tells me: CakePHP: the rapid development php framework Missing Controller Error: CssController could not be found. Error: Create the class CssController below in file: app/controllers/css_controller.php var $name = 'Css'; } ? Notice: If you want to customize this error message, create app/views/errors/missing_controller.ctp CakePHP: the rapid development php framework Does anybody have any ideas on how to fix this?

  Read the article

• ruby on rails gitorious setup on ubuntu

  - by dogmatic69

  Ive been trying to install gitorious for a while now which required ruby and rails etc. Ive finally got rails pages serving but cant finish the installation of gitorious because the gem version is too new. the error logs say please run 'rake ultrasphinx:configure' and that gives rake ultrasphinx:configure (in /var/www/apps/gitorious) rake aborted! uninitialized constant ActiveSupport::Dependencies::Mutex /var/www/apps/gitorious/Rakefile:10:in `require' (See full trace by running task with --trace) From searching google this is beacuse of the wrong gem verison. Cant find a way to down grade it. apparently sudo gem update --system 1.4.2 should do the trick but ubuntu 10.10 does not like this. ERROR: While executing gem ... (RuntimeError) gem update --system is disabled on Debian, because it will overwrite the content of the rubygems Debian package, and might break your Debian system in subtle ways. The Debian-supported way to update rubygems is through apt-get, using Debian official repositories. If you really know what you are doing, you can still update rubygems by setting the REALLY_GEM_UPDATE_SYSTEM environment variable, but please remember that this is completely unsupported by Debian. So i added export REALLY_GEM_UPDATE_SYSTEM=1 to .bashrc and reloaded it with . ~/.bashrc and still the same. ive tried various forms of setting this environmental variable with no luck. Ive also been told on #gitorious irc channel to add the file config/initializers/rubygems.rb with the line require "thread" to it. This has done nothing. EDIT: Just found another way which was rvm install rubygems 1.4.2 and it gave: Removing old Rubygems files... Installing rubygems dedicated to ruby-1.8.7-p334... Retrieving rubygems-1.4.2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 288k 100 288k 0 0 282k 0 0:00:01 0:00:01 --:--:-- 414k Extracting rubygems-1.4.2 ... Installing rubygems for /home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby ERROR: Error running 'GEM_PATH="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global:/home/ubuntu/.rvm/gems/ruby-1.8.7-p334@global" GEM_HOME="/home/ubuntu/.rvm/gems/ruby-1.8.7-p334" "/home/ubuntu/.rvm/rubies/ruby-1.8.7-p334/bin/ruby" "/home/ubuntu/.rvm/src/rubygems-1.4.2/setup.rb"', please read /home/ubuntu/.rvm/log/ruby-1.8.7-p334/rubygems.install.log WARN: Installation of rubygems did not complete successfully. TL;DR please tell me how to downgrade rubygems on ubuntu 10.10 or upgrade gitorious to work with 1.6.2 gems

  Read the article

• Good maintained privacy Add-On/settings set that takes usability into account?

  - by Foo Bar

  For some weeks I've been trying to find a good set of Firefox Addons that give me a good portion of privacy/security without losing to much of usability. But I can't seem to find a nice combination of add-ons/settings that I'm happy with. Here's what I tried, together with the pros and cons that I discovered: HTTPS Everywhere: Has only pro's: just install and be happy (no interaction needed), loads known pages SLL-encrypted, is updated fairly often NoScript - Fine, but needs a lot of fine-tuning, often maintained, mainly blocks all non-HTML/CSS Content, but the author sometimes seems to do "untrustworthy" decission RequestPolicy - seems dead (last activity 6 months ago, has some annoying bugs, official support mail address is dead), but the purpose of this is really great: gives you full control over cross-site requests: blocks by default, let's you add sites to a whitelist, once this is done it works interaction-less in the background AdBlock Edge: blocks specific cross-site requests from a pre-defined whitelist (can never be fully sure, need to trust others) Disconnect: like AdBlock Edge, just looking different, has no interaction possibilities (can never be fully sure, need to trust others, can not interact even if I wanted to) Firefox own Cookie Managment (block by default, whitelist specific sites), after building own whitelist it does it's work in the background and I have full control All These addons together basically block everything unsecure. But there are a lot of redundancies: NoScript has a mixed-content blocker, but FF has it's own for a while now. Also the Cookie blocker from NoScript is reduntant to my FF-Cookie setting. NoScript also has an XSS-blocker, which is redundant to RequestPolicy. Disconnect and AdBlock are extremly redundant, but not fully. And there are some bugs (especially RequestPolicy). And RequestPolicy seems to be dead. All in all, this list is great but has these heavy drawbacks. My favourite set would be "NoScript Light" (only script blocking, without all the additonal redundant-to-other-addons hick-hack it does) + HTTPS Everywhere + RequestPolicy-clone (maintained, less buggy), because RequestPolicy makes all other "site-blockers" obsolete (because it blocks everything by default and let's me create a whitelist). But since RequestPolicy is buggy and seems to be dead I have to fallback to AdBlock Edge and Disconnect, which don't block all and and need more maintaining (whitelist updates, trust-check). Are there addons that fulfill my wishes?

  Read the article

• Wireless traffic stops when downloading large files at high speed: packets lost (Linksys WRT120N router)

  - by Torious

  The problem Note: First I'd like to understand WHY this is happening. Ofcourse, a solution would be nice too. :) When downloading a large file over HTTP at high-speeds, my wireless traffic basically stops: I can't open webpages and the download itself pauses. It pauses pretty much immediately after starting it; sometimes at 800 KB, sometimes at a few MB. After some time, the download (and other traffic) resumes, but the problem keeps reoccurring during the same download. The problem does not occur when using a wired connection through the same router (Linskys WRT120N). Also note that the connection is not dropped when this happens. It's just that the traffic stops and I can't browse to web pages, etc. (SYN packets are sent but nothing is received, etc.) Inspection with Wireshark shows that the following happens: Server sends data packets which are acknowledged by client Server sends a packet, but SEQ indicates some packets were lost (6 packets in one occurrence). Server sends a few more packets and client acknowledges these using "selective acknowledgement" Server stops sending data for a while (since the lost packets were not acknowledged or the router stops forwarding them?) Eventually, server does a "retransmission" and traffic resumes as normal. This all seems normal behavior to me when packet loss occurs. It's the consistent packet loss throughout a large, high-speed download that puzzles me. What might cause this? My own idea is the following: My internet is pretty fast (100 mbps), so when starting a large-file download, the router buffers the incoming data (since wireless introduces some slight delay / lower speed, in part due to other networks), but the buffer overflows and the router drops packets to regulate traffic (and because it has no choice). But how could that happen? Doesn't the TCP window size limit the amount of data that can go unacknowledged? So how can the router's buffer overflow if there can only be like 64 KB waiting to be acknowledged? Note: I've disabled TCP window scaling and dynamic window size through netsh options, in an attempt to fix this, but it doesn't seem to matter. Also, Wireshark shows a pattern of the server sending 2 packets (of 1514 bytes) and the client sending an ACK, so does that rule out a possible buffer overflow? And a few more subsequent packets are received... I'm at a loss here. Thanks for any insights. Things that are (probably) NOT the cause / I have experimented with The browser Various TCP options in Windows 7 (netsh etc.) Router settings such as MTU, beacon interval, UPnP, ...

  Read the article

• flashcache with mdadm and LVM

  - by Backtogeek

  I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5] sdh3[1] sda3[0] 204736 blocks super 1.0 [6/6] [UUUUUU] md2 : active raid6 sdd5[2] sde5[3] sdf5[4] sdg5[5] sdh5[1] sda5[0] 3794905088 blocks super 1.1 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU] md3 : active raid0 sdc1[1] sdb1[0] 250065920 blocks super 1.1 512k chunks md1 : active raid10 sdh1[1] sda1[0] sdd1[2] sdf1[4] sdg1[5] sde1[3] 76749312 blocks super 1.1 512K chunks 2 near-copies [6/6] [UUUUUU] pcsvan PV /dev/mapper/ssdcache VG Xenvol lvm2 [3.53 TiB / 3.53 TiB free] Total: 1 [3.53 TiB] / in use: 1 [3.53 TiB] / in no VG: 0 [0 ] flashcache create command used: flashcache_create -p back ssdcache /dev/md3 /dev/md2 pvdisplay --- Physical volume --- PV Name /dev/mapper/ssdcache VG Name Xenvol PV Size 3.53 TiB / not usable 106.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 28952 Free PE 28912 Allocated PE 40 PV UUID w0ENVR-EjvO-gAZ8-TQA1-5wYu-ISOk-pJv7LV vgdisplay --- Volume group --- VG Name Xenvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 3.53 TiB PE Size 128.00 MiB Total PE 28952 Alloc PE / Size 40 / 5.00 GiB Free PE / Size 28912 / 3.53 TiB VG UUID 7vfKWh-ENPb-P8dV-jVlb-kP0o-1dDd-N8zzYj So that is where I am at, I thought that was the job done however when creating a logical volume called test and mounting it is /mnt/test the sequential write is pathetic, 60 ish MB/s /dev/md3 has 2 x SSD's in Raid0 which alone is performing at around 800 MB/s sequential write and I am trying to cache /dev/md2 which is 6 x 1TB drives in raid6 I have read a number of pages through the day and some of them here, it is obvious from the results that the cache is not functioning but I am unsure why. I have added the filter line in the lvm.conf filter = [ "r|/dev/sdb|", "r|/dev/sdc|", "r|/dev/md3|" ] It is probably something silly but the cache is clearly performing no writes so I suspect I am not mapping it or have not mounted the cache correctly. dmsetup status ssdcache: 0 7589810176 flashcache stats: reads(142), writes(0) read hits(133), read hit percent(93) write hits(0) write hit percent(0) dirty write hits(0) dirty write hit percent(0) replacement(0), write replacement(0) write invalidates(0), read invalidates(0) pending enqueues(0), pending inval(0) metadata dirties(0), metadata cleans(0) metadata batch(0) metadata ssd writes(0) cleanings(0) fallow cleanings(0) no room(0) front merge(0) back merge(0) force_clean_block(0) disk reads(9), disk writes(0) ssd reads(133) ssd writes(9) uncached reads(0), uncached writes(0), uncached IO requeue(0) disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0) uncached sequential reads(0), uncached sequential writes(0) pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0) lru hot blocks(31136000), lru warm blocks(31136000) lru promotions(0), lru demotions(0) Xenvol-test: 0 10485760 linear I have included as much info as I can think of, look forward to any replies.

  Read the article

• Chrome Problems on Windows 8

  - by Akshat Mittal

  There are a lot of problems with Chrome (24.0.1312.14 beta || But all this happened before update also) on Windows 8. Problems and explanations are listed below: Google Chrome re-draw time: When I switch tabs, the window retains the content of the previous tab and displays that even if I move my mouse, if only refreshes (re-draws) when there is a change on the webpage (like on hover) or I do a select all (or scroll). One thing to note is that the hover and select happens on the real page and not the retained image-like thing of the older webpage. Chrome is slow and laggy: Websites such as Facebook and Twitter (and more) have gone extremely laggy on Chrome (Win 8). When I was using Windows 7, I never experienced a lag or something. Also when using HTML-5 Websites, the transition (the -webkit-transition in CSS) goes extremely slow at times. Plugins Crash: Plugins like Flash Player, Shockwave Player, and more that are in-built into Chrome Crashes a lot, even when doing simple tasks like playing YouTube Videos, displaying ads or something. Chrome Crashes: Chrome has crashed over 100 times in the past month. Google Chrome just crashes randomly or I don't know the reason. Random Page crashes: Chrome results chrome://crash/(Copy-Paste this in address bar) on random pages even when the page is just loaded, I understand that this can happen on heavy HTML5 or JS websites but what about HTML only websites! Most of the things above happens on Super User also, Super User never had any problem when using Chrome on Windows 7. UPDATE 1: @magicandre1981 Commented for trying to disable Hardware Acceleration. I tried it, it somewhat solved the problem but din't fix it. I am still experiencing all the above issues but less frequently (maybe because Chrome Restarted Completely) UPDATE 2: @avirk asked me to try a Stable Version of Chrome and Firefox, I din't experience any lag in Firefox, a little (negligible) lag in Chrome 22 (Maybe because its a new copy of Chrome, I haven't used it much). Is anybody else experiencing such issues? Does anybody has a solution to any of these? Any Help is appreciated! Thank You!

  Read the article

• 10.6.4 Apple Wiki: New just created users can do nothing?

  - by beefon

  Hello, After update to 10.6.4 there's an issue: any new users that I create in Server Prefs/WGM can't post to their blogs, comment, create wiki pages... They can't do anything! There's log from Wiki errors (when user DURAK tries to create new blog entry): [HTTPChannel,5,127.0.0.1] Traceback (most recent call last): [HTTPChannel,5,127.0.0.1] File "/usr/share/caldavd/lib/python/twisted/web/server.py", line 126, in process self.render(resrc) [HTTPChannel,5,127.0.0.1] File "/usr/share/caldavd/lib/python/twisted/web/server.py", line 133, in render body = resrc.render(self) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_xmlrpc_server/WebAppServer.py", line 90, in render d = defer.maybeDeferred(function, *args) [HTTPChannel,5,127.0.0.1] File "/usr/share/caldavd/lib/python/twisted/internet/defer.py", line 104, in maybeDeferred result = f(*args, **kw) [HTTPChannel,5,127.0.0.1] --- <exception caught here> --- [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_xmlrpc_server/ContentServiceBase.py", line 121, in xmlrpc_addEntry aPage = ContentEntry.newBundleBasedContentEntry (path = path, content = content, author = author, title = title, uid = uid, type = kind, versioned = self.versioned, templateName = template) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_wlt/ContentEntry.py", line 794, in newBundleBasedContentEntry aPage.save('First created', 'created') [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_wlt/ContentEntry.py", line 445, in save revisions.addRevision(self.serializeEntry(revisionAttributes), inComment = comment, inAuthor = updateAuthor, inChangeType = editType) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_utilities/sqlitersion.py", line 36, in _func result = f(self, *args, **kwargs) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_utilities/sqlitersion.py", line 49, in addRevision contentPlistStr = plistlib.writePlistToString(inContentDict).decode("utf-8") [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 110, in writePlistToString [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 94, in writePlist [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 251, in writeValue [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 280, in writeDict [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 238, in writeValue [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 171, in simpleElement [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 221, in _escapeAndEncode [HTTPChannel,5,127.0.0.1] exceptions.UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 0: ordinal not in range(128) [HTTPChannel,5,127.0.0.1] 'Unparseable html in page, removing whatever was already written.' [HTTPChannel,5,127.0.0.1] Removing /Library/Collaboration/Users/durak/weblog/27133.page Any "old" user CAN create, modify, comment, etc. What can you recommend to fix this issue? Hope for your help...

  Read the article

• Mixed sessions with Classic ASP on IIS 7.5 and Windows 2008 R2 64 bit

  - by Marcin

  Recently had an issues with a server upgrade from IIS 6 on Windows 2003 to IIS 7.5 on Windows 2008 R2 64 bit. We have a number of websites running on Classic ASP. All the sites sit under a particular site, e.g. www.example.com/foo and www.example.com/foobar. On IIS 6 each site was set up as a virtual directory and things worked fine. Since moving to the new set up, a lot of websites seem to have mixed Sessions. To be clear, this is not a app pool recycling issue; rather the sessions are populated with information when the user hits the site and while browsing they get sessions from different sites. We've determined this based on - a few customers called up and reported having their shopping cart with items with names of items belonging to a different site - also our own testing showed that some queries being run would try to bring products in from a different site We've tried - disabling dynamic caching - converting each site to be a virtual application (if I understand correctly, the virtual directory/application concepts were changed/refined somewhat in IIS 7 although to be honest, I'm not clear what the difference is) - various application pool changes (using .NET 2 framework), classic and integrated modes, changing the Process model to NetworkIdentity), all to no avail. The only thing we haven't tried is changing it to run as a 32 bit application. We're not using http only cookies, so when I open up a browser and type document.cookie into the dev console in Firefox/Chrome/IE that there will be multiple ASPSESSIONID=... values whereas previously I believe there was only one. Finally, we use server side JScript for the classic ASP pages, not VBScript, so we have code similar to the below. //the user's login account as a jscript object Session("user") = { email : "[email protected]", id : 123 }; and if we execute a line of code like below: Response.Write( typeof(Session("user")) ); When things are running correctly, we get "object" - as expected. When the Session gets trashed, the output is "unknown" and we are also unable to access the fields within the JScript object (e.g. the .email or .id fields). Much appreciated if anyone can provide any pointers about how to resolve this, everything on google seems to point to different issues.

  Read the article

• Can't get my Raspberry Pi to keep a static IP

  - by JonnyIrving

  I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

  Read the article

• Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

  - by Adam Ryczkowski

  Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

  Read the article

• Force caching of handler output which actively resists caching

  - by deceze

  I'm trying to force caching of a very obnoxious piece of PHP script which actively tries to resist caching for no good reason by actively setting all the anti-cache headers: Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Content-Type: text/html; charset=UTF-8 Date: Thu, 22 May 2014 08:43:53 GMT Expires: Thu, 19 Nov 1981 08:52:00 GMT Last-Modified: Pragma: no-cache Set-Cookie: ECSESSID=...; path=/ Vary: User-Agent,Accept-Encoding Server: Apache/2.4.6 (Ubuntu) X-Powered-By: PHP/5.5.3-1ubuntu2.3 If at all avoidable I do not want to have to modify this 3rd party piece of code at all and instead just get Apache to cache the page for a while. I'm doing this very selectively to only very specific pages which have no real impact on session cookies or the like, i.e. which do not contain any personalised information. CacheDefaultExpire 600 CacheMinExpire 600 CacheMaxExpire 1800 CacheHeader On CacheDetailHeader On CacheIgnoreHeaders Set-Cookie CacheIgnoreCacheControl On CacheIgnoreNoLastMod On CacheStoreExpired On CacheStoreNoStore On CacheLock On CacheEnable disk /the/script.php Apache is caching the page alright: [cache:debug] AH00698: cache: Key for entity /the/script.php?(null) is http://example.com:80/the/script.php? [cache_disk:debug] AH00709: Recalled cached URL info header http://example.com:80/the/script.php? [cache_disk:debug] AH00720: Recalled headers for URL http://example.com:80/the/script.php? [cache:debug] AH00695: Cached response for /the/script.php isn't fresh. Adding conditional request headers. [cache:debug] AH00750: Adding CACHE_SAVE filter for /the/script.php [cache:debug] AH00751: Adding CACHE_REMOVE_URL filter for /the/script.php [cache:debug] AH00769: cache: Caching url: /the/script.php [cache:debug] AH00770: cache: Removing CACHE_REMOVE_URL filter. [cache_disk:debug] AH00737: commit_entity: Headers and body for URL http://example.com:80/the/script.php? cached. However, it is always insisting that the "cached response isn't fresh" and is never serving the cached version. I guess this has to do with the Expires header, which marks the document as expired (but I don't know whether that's the correct assumption). I've tried to overwrite and unset headers using mod_headers, but this doesn't help; whatever combination I try the cache is not impressed at all. I'm guessing that the order of operation is wrong, and headers are being rewritten after the cache sees them. early header processing doesn't help either. I've experimented with CacheQuickHandler Off and trying to set explicit filter chains, but nothing is helping. But I'm really mostly poking in the dark, as I do not have a lot of experience with configuring Apache filter chains. Is there a straight forward solution for how to cache this obnoxious piece of code?

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >