Search Results

Search found 21331 results on 854 pages for 'require once'.

Page 430/854 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Can't use nvidia card/driver on optimus notebook

  - by Mr. Pixel

  I installed (once again) the latest official nvidia driver for my GT540m on Ubuntu 11.10. Even though everything seems OK with my xorg.conf file (I've manually added BusID "PCI:1:0:0", since lspci shows 01:00.0 for my GPU). The problem is, when I use the xorg.conf file generated by Xorg -configure, Xorg automatically loads the Intel GPU. So I removed everything that was not related to my nvidia card, basically leaving my xorg.conf with one screen and one device (with the nvidia driver and the above-mentioned BusID), and Xorg fails to start. The log says something like "Devices on GT540m [newline] none" And a few lines later, something like "NVIDIA(0) found a screen, but have no device for it". When I don't set the BusID, it doesn't seem to detect my card either. Thank you for any suggestion. PS: If possible, I'd like to avoid bumblebee or any similar "hybrid graphics" solution, last time I tried I ended up reinstalling Ubuntu. Edit: Allow me to clarify the problem. I have a notebook with a GT540m graphics card, and an integrated intel gpu. I want to use the graphics card with full hardware acceleration and its official driver, as I do under windows.

  Read the article

• Ch-ch-ch-changes...

  - by Lou Vega

  The last few months have been pretty crazy. Just before the MVP summit in February I was approached about changing to a different project with my (then current) employer, and right after the summit I was approached by another company. Eventually I went with the new company and a new role in the Information Assurance field. More to come on that as things progress. All that being said I've not been as active in the .NET community as I once was and I miss it - so I'm looking to dive back in especially as Windows Phone 7 draws nearer and nearer. Speaking of the community - many of you may not recognize me if you see me now :) I had told my son for the last couple years that I would cut my hair before he turned 5 (he always asked how come he didn't have long hair) and he turns 5 (time has flown!) on June 19th so May 30th I cut my long hair down pretty short and donated the hair to Locks of Love. As Chris said to me on Twitter, "pics or it didn't happen" - well fortunately my wife was there to document the whole thing so I'll get a picture or two posted here soon.

  Read the article

• hide taskbar labels completely. no letters no words in the open windows. like windows 7, icons only

  - by Dom

  i posted this question in an answer box, so once person had to tell me to make it a separate question. http://superuser.com/questions/30007/hide-taskbar-labels-without-combining My Question: it shows 1 letter. i just want plain icons. like that of windows 7. no words/letter. only icons. how do u get rid of the letter? btw im using xp, i just want no words no letters on the taskbar. is it possible? answers appreciated(except bashful...)!

  Read the article

• Is there an application that can do a blue screen effect with a webcam?

  - by Axxmasterr

  Background: This is not the blue screen of death I am speaking of but the process called "Blue Screening" that takes and removes a particular colored background from an image so that it can be superimposed on some other video/still picture. If you have ever seen the weatherman stand in front of the map, then you have seen someone doing a blue screen technique. I would like to be able to capture video from my webcam, then send that video to a blue screen program which removes the white (or other color) from the background and then inserts a background of my own choosing. (think of the dead guy in freejack who was calling from all of the different places on earth) Then once the image is superimposed, I would like to pipe it into Skype for video conferencing. Anyone have a good way to do this?

  Read the article

• How do I reference the value of a constructed environment variable in a loop?

  - by Rob Spieldenner

  What I'm trying to do is loop over environment variables. I have a number of installs that change and each install has 3 IPs to push files to and run scripts on, and I want to automate this as much as possible (so that I only have to modify a file that I'll source with the environment variables). The following is a simplified version that once I figure out I can solve my problem. So given in my.props: COUNT=2 A_0=foo B_0=bar A_1=fizz B_1=buzz I want to fill in the for loop in the following script #!/bin/bash . <path>/my.props for ((i=0; i < COUNT; i++)) do <script here> done So that I can get the values from the environment variables. Like the following(but that actually work): echo $A_$i $B_$i or A=A_$i B=B_$i echo $A $B returns foo bar then fizz buzz

  Read the article

• Stop jucheck from running

  - by Ken

  I've installed Java on Windows Vista, and every day I get a Vista security warning asking me if I want to run "jucheck". Apparently this is the Java automatic updater. Well, I don't want it to run on its own, ever. I cancel it, and quit it. I right-click on the taskbar and unclick "Check for Updates Automatically", and then click "Never Check", and "Apply". And yet, it never remembers this setting. If I come back to the "Java Control Panel" right after clicking "OK", the very same box is checked again, all on its own. Is there some way to kill jucheck once and for all? If I simply delete jucheck.exe, will Java (other than the automatic check) still work, and will manual updates still work, and will it stop even trying to update every morning?

  Read the article

• 250 k 404 & 410 errors in Webmaster Tools. Bad backlinks?

  - by Natália

  Our webmaster tools account is showing 250.000 errors related with weird links from other sites. These URLs are comming mostly from non existent sites or are being generated directly by our website. Here some examples of these urls: oursite.com/&q=videos+caseros+sexo+pornos+gratis&sa=X&ei=R638T8eTO8WphAfF2vG8Bg&ved=0CCAQFjAC%2F%2Fpage%2F2%2Fpage%2F3%2Fpage%2F4%2Fpage%2F3%2Fpage%2F4%2Fpage%2F3%2Fpage%2F4%2Fpage%2F5%2Fpage%2F4/page/3 Our site is a popular spanish adult site, yet we don´t have keywords which are being mentioned in this url. Apparently this link comes from our site. Some more examples: oursite.com/&q=losmejoresvideosporno&sa=X&ei=U__8T-BnqK7RBdjmhYsH&ved=0CBUQFjAA%2F%2Fpage%2F2%2Fpage%2F3%2Fpage%2F2%2Fpage%2F3%2Fpage%2F2%2Fpage%2F3%2Fpage%2F4%2Fpage%2F3%2Fpage%2F2%2Fpage%2F3/page/4 Once again: not our queries, not out urls. oursite/tag/tetonas We think that it might be other site, which is having a policy of extremely bad SEO based on other sites branding and keywords usage: thirdsite/buscador/tetonas-oursite The question is: if other sites are generating these urls, how can we prevent this? Why the tag is being generated if no link was added to the other site? What should we do with these errors? 301? 410 gone? I have read all similar Q&A here but none of them seems to solve our problem. It is not likely to be a bad ad (Inspected them all). Maybe some all content which google decided to recrawl suddenly? Maybe third parties bad SEO policy? Maybe all of them? Any help will be higly appreciated,

  Read the article

• How do you explain to an "agile" team that they still need to plan the software they write?

  - by user23157

  This week at work I got agiled yet again. Having gone through the standard agile, TDD, shared ownership, ad hoc development methodology of never planning anything beyond a few user stories on a piece of card, verbally chewing the cud over the technicallities of a 3rd party integration ad nauseam without ever doing any real thinking or due dilligence and architecturally coupling all production code to the first test that comes into anyone's head for the past few months we reach the end of a release cycle and lo and behold the main externally visible feature that we have been developing is too slow to use, buggy, becoming labyrinthinly complex and completely inflexible. During this process "spikes" were done but never documented and not a single architectural design was ever produced (there was no FS, so what the hell eh, if you don't know what you are developing, how can you plan or research it?) - the project passed from pair to pair, each of whom only ever focused on a single user story at a time and well the result was inevitable. To resolve this I went off the radar, went (the dreaded) waterfall, planned, coded and basically didn't swap off the pair and tried as much as I could to work alone - focusing on solid architecture and specifications rather than unit tests which will come later once everything is pinned down. The code is now much better and is actually totally usable, flexible and fast. Certain people seem to have really resented me doing this and have gone out of their way to sabotage my efforts (possibly unconsciously) because it goes against the holy process of agile. So how do you, as a developer, explain to the team that it is not "un-agile" to plan their work, and how do you fit planning into the agile process? (I'm not talking about the IPM; I'm talking about sitting down with a problem and sketching out an end-to-end design that says how a problem should be solved in sufficient detail that anyone who works on the problem knows what architecture and patterns they should be using and where the new code should integrate into existing code)

  Read the article

• Best configuration and deployment strategies for Rails on EC2

  - by Micah

  I'm getting ready to deploy an application, and I'd like to make sure I'm using the latest and greatest tools. The plan is to host on EC2, as Heroku will be cost prohibitive for this application. In the recent past, I used Chef and the Opscode platform for building and managing the server infrastructure, then Capistrano for deploying. Is this still considered a best (or at least "good") practice? The Chef setup is great once done, but pretty laborious to set up. Likewise, Capistrano has been good to me over the past several years, but I thought I'd take some time to look around and seeing if there's been any landscape shifts that I missed.

  Read the article

• Computer won't start unless power is removed for ~5 minutes

  - by Paul Tarjan

  I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

  Read the article

• WizMouse Enables Mouse Over Scrolling on Any Window

  - by ETC

  WizMouse is a free and lightweight Windows application that enables a simple but effective trick: the ability to scroll the contents of a window that is under your mouse cursor without shifting the focus to that window. It may not seem like much, at first glance, but the ability to scroll a window without having to click on it and shift the focus of your current window is a huge time saver. Once WizMouse is installed simply mousing over any open window and engage your scroll wheel for instant scroll with no additional click or shift in focus necessary. You’ll get so used to it you’ll forget that it wasn’t built into Windows from the start. Hit up the link below to grab a copy of WizMouse, a free and Windows only application. WizMouse [Antibody Software] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) WizMouse Enables Mouse Over Scrolling on Any Window Enhance GIMP’s Image Editing Power with Gimp Paint Studio Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome

  Read the article

• ZFS: RAIDZ versus stripe with ditto blocks

  - by RandomInsano

  I'm going to build a ZFS file server from FreeBSD. I learned recently that I can't expand a RAIDZ udev once it's part of the pool. That's a problem since I'm a home user and will probably add one disk a year tops. But what if I set copies=3 against my entire pool and just throw individual drives into the pool separated? I've read somewheres that the copies will try and distribute across drives if possible. Is there a guarantee there? I really just want protection from bit rot and drive failure on the cheap. Speed's not an issue since it'll go over a 1Gb network and at MOST stream 720p podcasts. Would my data be guaranteed safe from a single drive failure? Are there things I'm not considering? Any and all input is appreciated.

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas?

  Read the article

• Any opinions on Paragon's NTFS for Mac solution?

  - by AngryHacker

  I am currently using the free NTFS-3G to access my NTFS drive from the Mac. It seems pretty stable (except once in the very beginning, it locked up the Mac and corrupted my NTFS drive, which I then fixed with chkdsk from a PC). However, speed is NOT one of its virtues. I've been looking at buying Paragon NTFS for Mac OS X 7.0. Their product comparison PDF claims nearly double the speed (vs NTFS-3G) in almost every category (read, write, etc...). Can someone tell me whether the product is stable and whether the speed claims are true.

  Read the article

• Why do I have to manually 'Restart Management Network' on vSphere 5 host after reboot to get networking available?

  - by growse

  I've got a couple of vSphere 5.0 hosts in a small lab environment here and I've noticed a strange behaviour. When on of the hosts gets rebooted, it is unresponsive to the network until I log into the ESX console, Press F2 to customize and select Restart management network. Once this is done, the networking works perfectly as expected. Each host has two NICs which are trunked together using Etherchannel to a Cisco 3750. The link is also a .1q VLAN trunk and the management network is configured on VLAN121 with the VM traffic configured on VLAN118. Why would the host be completely dead to the world until I physically kick it? Edit Sample switch config for trunk: interface Port-channel2 description Blade 1 EtherChannel Trunk switchport trunk encapsulation dot1q switchport mode trunk end ! ! interface GigabitEthernet4/0/1 description Bladecenter1 CPM 1A switchport trunk encapsulation dot1q switchport mode trunk speed 1000 duplex full channel-group 2 mode on end Vswitch teaming settings: Management port group settings:

  Read the article

• Restore access to Cisco Connect after changing router settings

  - by StasM

  I have recently bought Cisco Valet Plus (M20) wireless router (which I recognize now was a mistake, but nevermind). It has two setup options - Cisco Connect software and web-based setup. Cisco Connect software allows changing very small set of settings, web-based setup allows access to almost all settings, except settings for guest network. The problem is that when I use web-based setup, Cisco Connect after some changes refuses to talk to the router, so I can't change guest settings anymore (since web interface doesn't allow to change them). It must be because of some config parameter not matching or some password set wrong - but I don't know where Cisco Connect stores them. So, does anybody have any idea how to make Cisco Connect talk to the router again once I changed the settings through the web interface?

  Read the article

• Entity Framework and distributed Systems

  - by Dirk Beckmann

  I need some help or maybe only a hint for the right direction. I've got a system that is sperated into two applications. An existing VB.NET desktop client using Entity Framework 5 with code first approach and a asp.net Web Api client in C# that will be refactored right yet. It should be possible to deliver OData. The system and the datamodel is still involving and so migrations will happen in undefined intervalls. So I'm now struggling how to manage my database access on the web api system. So my favourd approch would be us Entity Framework on both systems but I'm running into trouble while creating new migrations. Two solutions I've thought about: Shared Data Access dll The first idea was to separate the data access layer to a seperate project an reference from each of the systems. The context would be the same as long as the dll is up to date in each system. This way both soulutions would be able to make a migration. The main problem ist that it is much more complicate to update a web api system than it is with the client Click Once Update Solution and not every migration is important for the web api. This would couse more update trouble and out of sync libraries Database First on Web Api The second idea was just to use the database first approch an on web api side. But it seems that all annotations will be lost by each model update. Other solutions with stored procedures have been discarded because of missing OData support and maintainability. Does anyone run into same conflicts or has any advices how such a problem can be solved!

  Read the article

• Working with Reporting Services Filters–Part 5: OR Logic

  - by smisner

  When you combine multiple filters, Reporting Services uses AND logic. Once upon a time, there was actually a drop-down list for selecting AND or OR between filters which was very confusing to people because often it was grayed out. Now that selection is gone, but no matter. It wouldn’t help us solve the problem that I want to describe today. As with many problems, Reporting Services gives us more than one way to apply OR logic in a filter. If I want a filter to include this value OR that value for the same field, one approach is to set up the filter is to use the IN operator as I explained in Part 1 of this series. But what if I want to base the filter on two different fields? I  need a different solution. Using the AdventureWorksDW2008R2 database, I have a report that lists product sales: Let’s say that I want to filter this report to show only products that are Bikes (a category) OR products for which sales were greater than $1,000 in a year. If I set up the filter like this: Expression Data Type Operator Value [Category] Text = Bikes [SalesAmount]   > 1000 Then AND logic is used which means that both conditions must be true. That’s not the result I want. Instead, I need to set up the filter like this: Expression Data Type Operator Value =Fields!EnglishProductCategoryName.Value = "Bikes" OR Fields!SalesAmount.Value > 1000 Boolean = =True The OR logic needs to be part of the expression so that it can return a Boolean value that we test against the Value. Notice that I have used =True rather than True for the value. The filtered report appears below. Any non-bike product appears only if the total sales exceed $1,000, whereas Bikes appear regardless of sales. (You can’t see it in this screenshot, but Mountain-400-W Silver, 38 has sales of $923 in 2007 but gets included because it is in the Bikes category.)

  Read the article

• How do I enable a disabled Event Notification.

  - by Derick Mayberry

  I have a scenerio where I am using external notification to process documents being sent in from the entire navy fleet, normally I have no problems, but just a few days ago an administrator changed passwords and I my queue processing failed and I rolled back the transaction with this C# code: catch (Exception) { TransporterService.WriteEventToWindowsLog(AppName, "Rolling Back Transaction:", ERROR); broker.Tran.Rollback(); break; } after which my target queue would continue to fill up but nothing to the external activation queue. Does the Event Notification get disabled once a transaction is rolled back? Should I have done a broker.EndDialog here when catching my exception? Also, after my event notification is disabled(if that is actually whats happening) how do I re engage it? Do I have to drop it and recreate it? Thank in advance for any help, I love Service Broker and its workign wonderfully except for this bug that I hope to fix soon.

  Read the article

• Decreasing the Height of the PinkMatter Flamingo Ribbon Bar

  - by Geertjan

  The one and only thing prohibiting wide adoption of PinkMatter's amazing Flamingo ribbon bar integration for NetBeans Platform applications (watch the YouTube movie here and follow the tutorial here) is... the amount of real estate taken up by the height of the taskpane: I was Skyping with Bruce Schubert about this and he suggested that a first step might me to remove the application menu. OK, once that had been done there was still a lot of height: But then I configured a bit further and now have this, which is pretty squishy but at least shows there are possibilities: How to get to the above point? Get the PinkMatter Flamingo ribbon bar from java.net (http://java.net/projects/nbribbonbar), which is now the official place where it is found, and then look in the "Flaming Integration" module. There you'll find com.pinkmatter.modules.flamingo.LayerRibbonComponentProvider. Do the following: Comment out "addAppMenu(ribbon);" in "createRibbon()". That's the end of the application menu. Change the "addTaskPanes(JRibbon ribbon)" method from this... private void addTaskPanes(JRibbon ribbon) { RibbonComponentFactory factory = new RibbonComponentFactory(); for (ActionItem item : ActionItems.forPath("Ribbon/TaskPanes")) {// NOI18N ribbon.addTask(factory.createRibbonTask(item)); } } ...to the following: private void addTaskPanes(JRibbon ribbon) { RibbonComponentFactory factory = new RibbonComponentFactory(); for (ActionItem item : ActionItems.forPath("Ribbon/TaskPanes")) { // NOI18N RibbonTask rt = factory.createRibbonTask(item); List<AbstractRibbonBand<?>> bands = rt.getBands(); for (AbstractRibbonBand arb : bands) { arb.setPreferredSize(new Dimension(40,60)); } ribbon.addTask(rt); } } Hurray, you're done. Not a very great result yet, but at least you've made a start in decreasing the height of the PinkMatter Flamingo ribbon bar. If anyone gets further with this, I'd be very happy to hear about it!

  Read the article

• Tools for managing eCommerce backend

  - by rboarman

  I am working with an eCommerce company that has outgrown their hacked together backend for managing inventory, pricing and feeds to various shopping engines (Yahoo, 3d cart, Amazon, etc.). They currently manage about 12,000 skus and are doing $40M in revenue. Their internal people are working on a new Magento solution, but that is six months away and they need to replace/improve their current solution in order to hold them over. Their current solution was developed by two people who have left the company. What tools/architecture do other eCommerce sites use to manage their inventory, pricing, product descriptions and feed generation for the shopping engines? The current solution looks like this: 1) Inventory, pricing and product descriptions are maintained in a database and in NetSuite by employees 2) New products are added to the database via import 3) Twice a week data is extracted into a giant Excel spreadsheet 4) The Excel file adjusts pricing based on some simple algorithms 5) The Excel file exports about six different csv feeds which are manually uploaded to Amazon, 3d cart, Yahoo, Google and Merchant Advantage a. Each feed is a variant of the product which different field names and formatting b. Pricing levels differ between feeds c. Some products are not sent to all feeds 6) Orders are manually parsed and the inventory is adjusted as needed once product is sold The new solution should: 1) Import data from ODBC, CSV and NetSuite (CSV via ftp) 2) Apply pricing changes via simple algorithms (< $80 add $10, $200 add $25) 3) Ensure margins are being met 4) Format and generate a bunch of CSV and XML feeds 5) Perhaps upload feeds to shopping engines automatically What I need to do is replace the Excel file with something that is maintainable and automated. Something in the .Net stack is preferable but not mandatory. I’ve been looking at BizTalk but it may take too long to develop and deploy. Any suggestions?

  Read the article

• How to find out the reason why a scheduled task hang?

  - by Graviton

  I have scheduled quite a number of tasks in my Windows 7, doing a variety of cron jobs on my machines. I am perfectly sure that these tasks, when run on their own, won't hang. But the problem is that, when I run them daily, over the course of several days and weeks and months, occasionally some of them will hang. So I am forced to kill the hanged task and rerun it--- and now it can run successfully! I want to fix this problem once and for all, and for that, I need to know why a scheduled task will hang, even when I run it separately, it won't. Anyway for me to find out the reason?

  Read the article

• Get Proactive with Fusion Middleware

  - by Daniel Mortimer

  Prevent, Resolve, Upgrade ! If you have not seen or bookmarked it already, check out:Get Proactive with Fusion Middleware [ID 1388293.1]This is a one stop shop for navigating to proactive support material, tools, and communication channels related to Oracle Fusion Middleware e.g. Lifecycle Advisors Information Centers Diagnostic and Health Check Tools like RDA and OCM Support Communities Newsletters Furthermore, once in this support document, a click on the "Proactive Home" option in the menu will take you to the main Get Proactive support document. From this document you can access other product family "Get Proactive" documents such as the ones belonging to the Database and Enterprise Manager.Oracle Premier Support: Get Proactive! [ID 432.1]432.1 .. nice easy number to remember :-) The "Get Proactive" support documents will be updated on a monthly basis. If you have any comments or feedback feel free to post against this blog entry. Or alternatively click the "Rate this Document" icon when viewing the support document in My Oracle Support.

  Read the article

• Missing Package: header, Problem with MergeList, The package lists or status file could not be parsed or opened

  - by Inbar Rose

  THIS IS NOT A DUPLICATE OF SIMILAR QUESTIONS (like this) I just had to write that first, there are tons of questions similar to this, all of them have the same redirect to an answer that does not solve my problem, because I don't have the same problem, just the same symptom. I write tests for my companies application. One of these tests tries to upgrade the application from a previous version to a new version to make sure nothing breaks. When I am installing an old version of the application, some weird stuff starts to happen. Sometimes everything goes Okay, and nothing is wrong, other times when trying to install I get this message (company app name censored): E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/XXX-amd64_Packages E: The package lists or status file could not be parsed or opened. Using the solutions provided in the questions similar to this one (like this). Do not help, and the problem keeps repeating itself once it happens the first time. This has led me to believe something is wrong on the apt server where the package is being created, but searching these errors yields no information on anything beyond the "fix" suggested in the question I linked, the only other source of information I could find also did not help (here): So I am asking for information; What is the actual problem? What causes the problem? What can fix the problem? I hope this question is in good format, if there is a problem, or missing information I can move to chat.

  Read the article

• JavaOne India Early Bird Discount Ends April 2nd

  - by Tori Wieldt

  JavaOne India3-4 May, 2012Hyderabad International Convention Centre Register Now and Save – For A Limited Time!If you register by 2 April, you'll save INR 1080 on this premier Java technology conference. JavaOne will return for the second straight year to India May 3, 4 at the Hyderabad Convention Center. This year's line up will once again bring some of the leading experts in from all over the world as well as local Indian content. Sharat Chander (Director - Java Technology Outreach) said, "JavaOne is the premier Java technology conference in the world, for developers by developers.  Every year we keep increasing community participation in both the content selection and content delivery, and this year we expect even more."The JavaOne India tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #javaoneIndia

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >