Search Results

Search found 26124 results on 1045 pages for 'unreal development kit'.

Page 430/1045 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Need help with a complex 3d scene (using Ogre and bullet)

  - by Matthias

  In my setup there is a box with a hole on one side, and a freely movable "stick" (or bar, tube). This stick can be inserted/moved through the hole into the box. This hole is exactly as wide as the diameter of the stick. In reality, when you would now hold the end of the stick in your hand and move the hand left/right or up/down, the other end of the stick, which is inside the box, would move into the opposite direction of your hand movement (because the stick is affixed at the pivot point where it is entering the box through the hole). (I hope you understand what I mean so far.) Now I need to simulate such a setup in a 3d program. I have already successfully developed an Ogre3d framework for this application, including bullet. But what I don't know is how I can implement in my program what I have described above. This application must include two more features: The scene camera is attached to the end of the stick that is inserted into the box. So when the user would move the mouse (to control "his" end of the stick outside the box), then the camera attached to the stick would move in the opposite direction, as described above. The stick has some length, and the user can push it further into the box, or pull it closer to him again. That means of course that the max. radius on which the end of the stick inside the box can move depends on how far the stick is pushed into the box. Thus, the more the stick is pushed into the box, the larger the max. radius of this end of the stick with the camera will be. I understand this is maybe quite a complex thing, so I don't expect any real source code here. I already have the Ogre and bullet part as said up and running, as well as a camera attached to the stick. This works fine. What I don't know though is how I can simulate the setup described above. Especially the requirement that the stick is affixed at the position of the hole on the box, where it is inserted into the box. Any ideas how I could approach to implement the described setup?

  Read the article

• How do I check on non-transparent pixels in a bitmapdata?

  - by Opoe

  I'm still working on my window cleaning game from one of my previous questions I marked a contribution as my answer, but after all this time I can't get it to work and I have to many questions about this so I decided to ask some more about it. As a sequel on my mentioned previous question, my question to you is: How can I check whether or not a bitmapData contains non transparent pixels? Subquestion: Is this possible when the masked image is a movieclip? Shouldn't I use graphics instead? Information I have: A dirtywindow movieclip on the bottom layer and a clean window movieclip on layer 2(mc1) on the layer above. To hide the top layer(the dirty window) I assign a mask to it. Code // this creates a mask that hides the movieclip on top var mask_mc:MovieClip = new MovieClip(); addChild(mask_mc) //assign the mask to the movieclip it should 'cover' mc1.mask = mask_mc; With a brush(cursor) the player wipes of the dirt ( actualy setting the fill from the mask to transparent so the clean window appears) //add event listeners for the 'brush' brush_mc.addEventListener(MouseEvent.MOUSE_DOWN,brushDown); brush_mc.addEventListener(MouseEvent.MOUSE_UP,brushUp); //function to drag the brush over the mask function brushDown(dragging:MouseEvent):void{ dragging.currentTarget.startDrag(); MovieClip(dragging.currentTarget).addEventListener(Event.ENTER_FRAME,erase) ; mask_mc.graphics.moveTo(brush_mc.x,brush_mc.y); } //function to stop dragging the brush over the mask function brushUp(dragging:MouseEvent):void{ dragging.currentTarget.stopDrag(); MovieClip(dragging.currentTarget).removeEventListener(Event.ENTER_FRAME,erase); } //fill the mask with transparant pixels so the movieclip turns visible function erase(e:Event):void{ with(mask_mc.graphics){ beginFill(0x000000); drawRect(brush_mc.x,brush_mc.y,brush_mc.width,brush_mc.height); endFill(); } }

  Read the article

• Keep 3d model facing the camera at all angles

  - by Sparky41

  I'm trying to keep a 3d plane facing the camera at all angles but while i have some success with this: Vector3 gunToCam = cam.cameraPosition - getWorld.Translation; Vector3 beamRight = Vector3.Cross(torpDirection, gunToCam); beamRight.Normalize(); Vector3 beamUp = Vector3.Cross(beamRight, torpDirection); shipeffect.beamWorld = Matrix.Identity; shipeffect.beamWorld.Forward = (torpDirection) * 1f; shipeffect.beamWorld.Right = beamRight; shipeffect.beamWorld.Up = beamUp; shipeffect.beamWorld.Translation = shipeffect.beamPosition; *Note: Logic not wrote by me i just found this rather useful It seems to only face the camera at certain angles. For example if i place the camera behind the plane you can see it that only Roll's around the axis like this: http://i.imgur.com/FOKLx.png (imagine if you are looking from behind where you have fired from. Any idea what to what the problem is (angles are not my specialty) shipeffect is an object that holds this class variables: public Texture2D altBeam; public Model beam; public Matrix beamWorld; public Matrix[] gunTransforms; public Vector3 beamPosition;

  Read the article

• Android Java rectangle collision detection not working

  - by Charlton Santana

  I had been hard coding a collision detection system which was buggy. Then I came across using rectangles for collsion detection. So I put it all in and it does not work, I put a log in and it never logged. Note to Java programmers who are not Android programers: Android uses the word Rect instead of Rectangle. Code for Block.java: public Rect getBounds(){ return new Rect (this.x, this.y, 10, 20); } Code for Sprite.java: public Rect getBounds(){ return new Rect (this.x, this.y, 20, 20); } Code for MainGame.java: for(Block block : BLOCKS) { block.draw(canvas); block.rigidbody(); Rect spriter = sprite.getBounds(); Rect blockr = block.getBounds(); if(spriter.intersect(blockr)){ showgameover = 1; Log.d(TAG, "Game Over"); } } Is anyone able to help?

  Read the article

• Unity 5.1 audio issues (no sound in back channels)

  - by N0xus

  I've trying to bring in surround sound audio into my project. I've set my computer up to run in 5.1 and when I play a 6 channel audio through windows media player (it's a test audio that does left speaker, right speaker etc) it works fine. However, when I run it through Unity, all I get is the front 3 channels. I've set it in the Edit - project settings - audio to be 5.1 in there. I even set it in code with following: void Start() { AudioSettings.speakerMode = AudioSpeakerMode.Mode5point1; } How ever, when I run a debug line of: print ( AudioSettings.driverCaps); It tells me that Unity is only playing in stereo. Is there something I'm still not doing? I should also add I've ran 10 different tests using the 3D audio pan and spread options. I've set both to either being fully off, half way on and full. Still the same results.

  Read the article

• Frames per Second and Updates per Second [on hold]

  - by matt murray

  So this is more a general resources question, as I am seeking knowledge on how best to conserve resources in a game (I am writing in Java, and please this is not a thread on what language I should write it in, I have already chosen Java) so that the updates and frames per second could be the highest they could be. In general I am just searching for any articles you may have, any personal experience, anything what so ever that could be of use to a pretty new Java game developer on the subject! Thanks in advance!

  Read the article

• Camera Collision inside the room model

  - by sanddy

  I am having a problem in Calculating the camera collision for my Room model which consists of sofa, tables and other models. The users shall be moving the camera front, back, rotating so i need to make sure that the camera does not collide with any of the models with in the room. I have treated all my models inside the room by BoundingBox[] and the camera by BoundingSphere. So, far i have implemented collision by looking into the tutorial from http://www.toymaker.info/Games/XNA/html/xna_model_collisions.html which was great. But, I guess the problem lies in the Transformation part. I debugged and found some points to be at Vector(-XXX,-XXX,-XXX) where X is digit. Also i found my radius of some models where too large(in thousand, i just looked into its radius value before converting to BoundingBox). Do I need to scale the model for collision??? Below are my code:- On My LoadContent(): Matrix[] transforms = new Matrix[myModel.Bones.Count]; myModel.CopyAbsoluteBoneTransformsTo(transforms); int index = 0; box = new List<BoundingBox>(); BoundingBox worldModel = Utility.CalculateBoundingBox(myModel); foreach (ModelMesh mesh in myModel.Meshes) { Vector3[] obb = new Vector3[8]; worldModel.GetCorners(obb); Vector3[] asdf = (Vector3[])obb.Clone(); Vector3.Transform(obb, ref transforms[mesh.ParentBone.Index], obb); BoundingBox worldBox = BoundingBox.CreateFromPoints(obb); box.Add(worldBox); index++; } On CameraPosition Update: BoundingSphere bs = new BoundingSphere(this.cameraPos, 5.0f); if (RoomWalkthrough.Utility.CheckCollision(bs, bb)) { // Do Something } Please Help.

  Read the article

• Android/Java AI agent framework/middleware

  - by corneliu

  I am looking for an AI agent framework to use as a starting point in an Android game I have to create for a university research project. It has been suggested to me to use JADE, but, as far as I can tell, it's not a suitable framework for games (at least for my game idea) because it runs in a split-execution mode, and it needs an always-active network connection to a main host. What I want is just a little something to give me a headstart. I am willing to adjust the game's features to the framework because it's more of a mockup game, and the purpose is to compare the performance of a couple of agents in the game world. The game will be very simplistic, with a minimal UI that displays various stats about the characters in the game (so no graphics, no pathfinding). Thank you.

  Read the article

• How to handle multiple effect files in XNA

  - by Adam 'Pi' Burch

  So I'm using ModelMesh and it's built in Effects parameter to draw a mesh with some shaders I'm playing with. I have a simple GUI that lets me change these parameters to my heart's desire. My question is, how do I handle shaders that have unique parameters? For example, I want a 'shiny' parameter that affects shaders with Phong-type specular components, but for an environment mapping shader such a parameter doesn't make a lot of sense. How I have it right now is that every time I call the ModelMesh's Draw() function, I set all the Effect parameters as so foreach (ModelMesh m in model.Meshes) { if (isDrawBunny == true)//Slightly change the way the world matrix is calculated if using the bunny object, since it is not quite centered in object space { world = boneTransforms[m.ParentBone.Index] * Matrix.CreateScale(scale) * rotation * Matrix.CreateTranslation(position + bunnyPositionTransform); } else //If not rendering the bunny, draw normally { world = boneTransforms[m.ParentBone.Index] * Matrix.CreateScale(scale) * rotation * Matrix.CreateTranslation(position); } foreach (Effect e in m.Effects) { Matrix ViewProjection = camera.ViewMatrix * camera.ProjectionMatrix; e.Parameters["ViewProjection"].SetValue(ViewProjection); e.Parameters["World"].SetValue(world); e.Parameters["diffuseLightPosition"].SetValue(lightPositionW); e.Parameters["CameraPosition"].SetValue(camera.Position); e.Parameters["LightColor"].SetValue(lightColor); e.Parameters["MaterialColor"].SetValue(materialColor); e.Parameters["shininess"].SetValue(shininess); //e.Parameters //e.Parameters["normal"] } m.Draw(); Note the prescience of the example! The solutions I've thought of involve preloading all the shaders, and updating the unique parameters as needed. So my question is, is there a best practice I'm missing here? Is there a way to pull the parameters a given Effect needs from that Effect? Thank you all for your time!

  Read the article

• How can I resolve collisions at different speeds, depending on the direction?

  - by Raven Dreamer

  I have, for all intents and purposes, a Triangle class that objects in my scene can collide with (In actuality, the right side of a parallelogram). My collision detection and resolution code works fine for the purposes of preventing a gameobject from entering into the space of the Triangle, instead directing the movement along the edge. The trouble is, the maximum speed along the x and y axis is not equivalent in my game, and moving along the Y axis (up or down) should take twice as long as an equivalent distance along the X axis (left or right). Unfortunately, these speeds apply to the collision resolution too, and movement along the blue path above progresses twice as fast. What can I do in my collision resolution to make sure that the speedlimit for Y axis movement is obeyed in the latter case? Collision Resolution for this case below (vecInput and velocity are the position and velocity vectors of the game object): // y = mx+c // solve for y. M = 2, x = input's x coord, c = rightYIntercept lowY = 2*vecInput.x + parag.rightYIntercept ; ... else { // y = mx+c // vecInput.y = 2(x) + RightYIntercept // (vecInput.y - RightYIntercept) / 2 = x; //if velocity.Y (positive) greater than velocity.X (negative) //pushing from bottom, so push right. if(velocity.y > -1*velocity.x) { //change the input vector's x position to match the //y position on the shape's edge. Formula for line: Y = MX+C // M is 2, C is rightYIntercept, y is the input y, solve for X. vecInput = new Vector2((vecInput.y - parag.rightYIntercept)/2, vecInput.y); Debug.Log("adjusted rightwards"); } else { vecInput = new Vector2( vecInput.x, lowY); Debug.Log("adjusted downwards"); } }

  Read the article

• Server for online browser game

  - by Tim Rogers

  I am going to be making an online single player browser game. The online element is needed so that a player can login and store the state of their game. This will include things like what buildings have been made and where they have been positioned as well as the users personal statistics and achievements. At this point in time, I am expecting all of the game logic to be performed client side So far, I am thinking I will use flash for creating the client side of the game. I am also creating a MySQL database to store all the users information. My question is how do I connect the two. Presumably I will need some sort of server application which will listen for incoming requests from any clients, perform the SQL query and then return the data. Does anyone have any recommendations of what technology/language to use?

  Read the article

• Understanding how texCUBE works and writing cubemaps properly into a cube rendertarget

  - by cubrman

  My goal is to create accurate reflections, sampled from a dynamic cubemap, for specific 3d objects (mostly lights) in XNA 4.0. To sample the cubemap I compute the 3d reflection vector in a classic way: half3 ReflectionVec = reflect(-directionToCamera, Normal.rgb); I then use the vector to get the actual reflected color: half3 ReflectionCol = texCUBElod(ReflectionSampler, float4(ReflectionVec, 0)); The cubemap I am sampling from is a RenderTarget with 6 flat faces. So my question is, given the 3d world position of an arbitrary 3d object, how can I make sure that I get accurate reflections of this object, when I re-render the cubemap. Should I build the ViewProjection matrix in a specific way? Or is there any other approach?

  Read the article

• How to remove seams from a tile map in 3D?

  - by Grimshaw

  I am using my OpenGL custom engine to render a tilemap made with Tiled, using a well spread tileset from the web. There is nothing fancy going on. I load the TMX file from Tiled and generate vertex arrays and index arrays to render the tilemap. I am rendering this tilemap as a wall in my 3D world, meaning that I move around with a fly camera in my 3D world and at Z=0 there is a plane showing me my tiles. Everything is working correctly but I get ugly seems between the tiles. I've tried orthographic and perspective cameras and with either I found particular sets of parameters for the projection and view matrices where the artifacts did not show, but otherwise they are there 99% of the time in multiple patterns, depending on the zoom and camera parameters like field of view. Here's a screenshot of the artifact being shown: http://i.imgur.com/HNV1g4M.png Here's the tileset I am using (which Tiled also uses and renders correctly): http://i.imgur.com/SjjHK4q.png My tileset has no mipmaps and is set to GL_NEAREST and GL_CLAMP_TO_EDGE values. I've looked around many articles in the internet and nothing helped. I tried uv correction so the uv fall at half of the texel, rather than the end of the texel to prevent interpolating with the neighbour value(which is transparency). I tried debugging with my geometry and I verified that with no texture and a random color in each tile, I don't seem to see any seams. All vertices have integer coordinates, i.e, the first tile is a quad from (0,0) to (1,1) and so on. Tried adding a little offset both to the UV and to the vertices to see if the gaps cease to exist. Disabled multisampling too. Nothing fixed it so far. Thanks.

  Read the article

• text extraction from video game dialogue files [on hold]

  - by wdwvt1

  As part of an academic project, I am trying to access the dialogue files (whether audio or text) from a variety of sports video games (Madden or NBA 2kX would be fantastic). I have searched extensively on other sites (scholarly text-mining publications, r/gaming, r/madden, modding sites, etc.) for guidance in how to extract dialogue files, but have been unsuccessful. Given that I don't have even the domain specific language to ask the right question (i.e. the resources I am seeking are out there, I just can't find them) I am asking the SE game dev community for help with the 2 following questions: Is there a canonical resource that I should study that would get me started with how to extract text or audio files from games? I am very fluent in python, which usually excels at mining information from sources, but I struggle with knowing where to start with a video game (as opposed to a more familiar database with a defined API). Is this even feasible, or are protections included with newer games (e.g. NBA 2k13) going to make extraction of these resources in a programmatic way impossible? Thank you for your help!

  Read the article

• 2d shapes in XNA 4.0?

  - by Lautaro

  Having some experience of XNA but none of 3D programming. I have an idea i want to realize but i have not decided to do it in 3d or 2d. Im not sure which one will be best in XNA. I want to have a shape like a blob that can reshape depending on input. The morphing does not need to be very advanced. It could be a circle (2d) or globe (3d) that just has one point that moves slightly in a random direction. In ASP.NET i have made this through the 2d Draw classes where i can make lines, circles, squares etc and then modify the points that makes them up. But it seems to me that XNA does not have classes for making 2d shapes (can i get this confirmed?). If it had, then this would be the quickest solution for me.

  Read the article

• What platform were old TV video games developed on?

  - by Mihir

  I am very eager to know how TV video games (which we all used to play in our childhood) were developed and on which platform. I know how games are developed for mobile devices, Windows PC's and Mac but I'm not getting how (in those days) Contra, Duck Hunt and all those games were developed. As they have high graphics and a large number of stages. So how did they manage to develop games in such a small size environment and with lower configuration platform?

  Read the article

• XNA C# How to draw fonts in different color

  - by XNA newbie

  I'm doing a simple chat system with XNA C#. It is a chatbox that contains 5 lines of chat typed by the users. Something like a MMORPG chatting system. [User1name] says: Hi [User2name] says: Hello [User1name] says: What are you doing? [User2name] says: I'm fine [System] The time is now 1:03AM. When the user pressed 'ENTER', the text he entered will be added inside an ArrayList chatList.Add(s); For displaying the text he entered, I used for (int i = 0; i < chatList.Count(); i++) { spriteBatch.DrawString(font, chatList[i], new Vector2(40, arr1[i]), Color.Yellow); } *arr1[i] contains 5 y-axis points to print my 5 line of chats in the chatbox Question1: What if I have another type of message which will be added into ChatList (something like a system message). I need the System Message to be printed out in red color. And if the user keeps on chatting, the chat box will be updated according: (MAX 5 LINES) The newest chat will be shown below, and the oldest one will be deleted if they reached the max 5 lines. [User2name] says: Hello [User1name] says: What are you doing? [User2name] says: I'm fine [System] The time is now 1:03AM. [User1name] says: Ok, great to hear that! I'm having trouble to print each line color according to their msg type. For normal msg, it should be yellow. For system msg, it should be red. Question2: And for the next problem, I need the chat texts to be white color, while the names of the user is yellow (like warcraft3 chat system). How do I do that? I have a hard time thinking of a solution for these to work. Advise needed.

  Read the article

• Getting the number of fragments which passed the depth test

  - by Etan

  In "modern" environments, the "NV Occlusion Query" extension provides a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? Use mipmaps and simply read the pixel on the 1x1 level. Again the question of accuracy and if it is even possible using non-power-of-two textures. The problem wit these approaches is, that the pipeline gets stalled which results in major performance issues. Therefore, I'm looking for a more performant way to accomplish my goal. Using the EXT_OCCLUSION_QUERY_BOOLEAN extension Apple introduced EXT_OCCLUSION_QUERY_BOOLEAN in iOS 5.0 for iPad 2. "4.1.6 Occlusion Queries Occlusion queries use query objects to track the number of fragments or samples that pass the depth test. An occlusion query can be started and finished by calling BeginQueryEXT and EndQueryEXT, respectively, with a target of ANY_SAMPLES_PASSED_EXT or ANY_SAMPLES_PASSED_CONSERVATIVE_EXT. When an occlusion query is started with the target ANY_SAMPLES_PASSED_EXT, the samples-boolean state maintained by the GL is set to FALSE. While that occlusion query is active, the samples-boolean state is set to TRUE if any fragment or sample passes the depth test. When the occlusion query finishes, the samples-boolean state of FALSE or TRUE is written to the corresponding query object as the query result value, and the query result for that object is marked as available. If the target of the query is ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, an implementation may choose to use a less precise version of the test which can additionally set the samples-boolean state to TRUE in some other implementation dependent cases." The first sentence hints on a behavior which is exactly what I'm looking for: getting the number of pixels which passed the depth test in an asynchronous manner without much performance loss. However, the rest of the document describes only how to get boolean results. Is it possible to exploit this extension to get the pixel count? Does the hardware support it so that there may be hidden API to get access to the pixel count? Other extensions which could be exploitable would be debugging features like the number of times the fragment shader was invoked (PSInvocations in DirectX - not sure if something simila is available in OpenGL ES). However, this would also result in a pipeline stall.

  Read the article

• Collision with half semi-circle

  - by heitortsergent

  I am trying to port a game I made using Flash/AS3, to the Windows Phone using C#/XNA 4.0. You can see it here: http://goo.gl/gzFiE In the flash version I used a pixel-perfect collision between meteors (it's a rectangle, and usually rotated) that spawn outside the screen, and move towards the center, and a shield in the center of the screen(which is half of a semi-circle, also rotated by the player), which made the meteor bounce back in the opposite direction it came from, when they collided. My goal now is to make the meteors bounce in different angles, depending on the position it collides with the shield (much like Pong, hitting the borders causes a change in the ball's angle). So, these are the 3 options I thought of: -Pixel-perfect collision (microsoft has a sample(http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel_transformed)) , but then I wouldn't know how to change the meteor angle after the collision -3 BoundingCircle's to represent the half semi-circle shield, but then I would have to somehow move them as I rotate the shield. -Farseer Physics. I could make a shape composed of 3 lines, and use that as the collision object for the shield. Is there any other way besides those? Which would be the best way to do it(it's aimed towards mobile devices, so pixel-perfect is probably not a good choice)? Most of the time there's always a easier/better way than what we think of...

  Read the article

• Can SpriteBatch be used to fill a polygon with a texture?

  - by can poyrazoglu

  I basically need to fill a texture into a polygon using the SpriteBatch. I've done some research but couldn't find anything useful except polygon triangulation method, which works well only with convex polygons (without diving into super math which is definitely not something I'm pretty good at). Are there any solutions for filling in a polygon in a basic way? I of course need something dynamic (I'll have a map editor that you can define polygons, and the game will render them (and collision detection will also use them but that's off topic), basically I can't accept solutions like "pre-calculated" bitmaps or anything like that. I need to draw a polygon with the segments provided, to the screen, using the SpriteBatch.

  Read the article

• How to visually "connect" skybox edges with terrain model

  - by David

  I'm working on a simple airplane game where I use skybox cube rendered using disabled depth test. Very close to the bottom side of the skybox is my terrain model. What bothers me is that the terrain is not connected to the skybox bottom. This is not visible while the plane flies low, but as it gets some altitude, the terrain looks smaller because of the perspective. Since the skybox center is always same as the camera position, the skybox moves with the plane, but the terrain goes into the distance. Ok, I think you understand the problem. My question is how to fix it. It's an airplane game so limiting max altitude is not possible. I thought about some way to stretch terrain to always cover whole bottom side of the skybox cube, but that doesn't feel right and I don't even know how would I calculate new terrain dimensions every frame. Here are some screenshot of games where you can clearly see the problem: (oops, I cannot post images yet) darker brown is the skybox bottom here: http://i.stack.imgur.com/iMsAf.png untextured brown is the skybox bottom here: http://i.stack.imgur.com/9oZr7.png

  Read the article

• Rotate canvas along its center based on user touch - Android

  - by Ganapathy

  I want to rotate the canvas circularly on its center axis based on user touch. i want to rotate based on center but its rotating based on top left corner . so i am able to see only 1/4 for rotation of image. any idea.. Like a old phone dialer . I have tried like as follows onDraw(Canvas canvas){ canvas.save(); // do my rotation canvas.rotate(rotation,0,0); canvas.drawBitmap( ((BitmapDrawable)d).getBitmap(),0,0,p ); canvas.restore(); } @Override public boolean onTouchEvent(MotionEvent e) { float x = e.getX(); float y = e.getY(); updateRotation(x,y); mPreviousX = x; mPreviousY = y; invalidate(); } private void updateRotation(float x, float y) { double r = Math.atan2(x - centerX, centerY - y); rotation = (int) Math.toDegrees(r); }

  Read the article

• Curiosity on any Smartphones that Run on Android 2.3.3 with Different Screen Reoslution

  - by David Dimalanta

  I have a question regarding about any smartphones that run only in Android 2.3.3. Is the size of screen or the screen resolution is always HVGA or does it have capable of running this OS (Android 2.3.3) on big screen size (4" to 5") at about 720x1280? I'm thinking of the game's compatibility depending on the version of the Android OS and the screen resolution, which affects the change of coordinates especially for assigning touch buttons and drag-n-drop at exact location, before I'm gonna decide to make one. My program works on the Android 4 ICS and Jellybean, however, will that work on Android 2.3.3 in spite of precise touch coordinate or just dependent on the screen resolution (regardless how large it is) as the X and Y coordinate? And take note, I'm using Eclipse IDE for Java developers.

  Read the article

• How to make players be creative in a game, if the game cannot evaluate it?

  - by Mensonge

  I am working on a prototype game with several funny/visual effects that the player can trigger. The player can be quite creative in the way to use or combine these effects but it seems impossible to make detect/evaluate this creativity by the computer. So, from a game design perspective, I wonder what could be the features to drive the players to be creative (experiment various combinations). For the moment i think about "Draw something" where the result is evaluated by other players. I think about levels designed by "Little Big Planet" players but this aspect is out of the core game. I think also about "Minecraft" but I do not understand really how this game encourages the people to be creative (except of the open world). Please tell me if you have any ideas, articles or references that could help me coping with this problem.

  Read the article

• Height Map Mapping to "Chunked" Quadrilateralized Spherical Cube

  - by user3684950

  I have been working on a procedural spherical terrain generator for a few months which has a quadtree LOD system. The system splits the six faces of a quadrilateralized spherical cube into smaller "quads" or "patches" as the player approaches those faces. What I can't figure out is how to generate height maps for these patches. To generate the heights I am using a 3D ridged multi fractals algorithm. For now I can only displace the vertices of the patches directly using the output from the ridged multi fractals. I don't understand how I generate height maps that allow the vertices of a terrain patch to be mapped to pixels in the height map. The only thing I can think of is taking each vertex in a patch, plug that into the RMF and take that position and translate into u,v coordinates then determine the pixel position directly from the u,v coordinates and determine the grayscale color based on the height. I feel as if this is the right approach but there are a few other things that may further complicate my problem. First of all I intend to use "height maps" with a pixel resolution of 192x192 while the vertex "resolution" of each terrain patch is only 16x16 - meaning that I don't have any vertices to sample for the RMF for most of the pixels. The main reason the height map resolution is higher so that I can use it to generate a normal map (otherwise the height maps serve little purpose as I can just directly displace vertices as I currently am). I am pretty much following this paper very closely. This is, essentially, the part I am having trouble with. Using the cube-to-sphere mapping and the ridged multifractal algorithm previously described, a normalized height value ([0, 1]) is calculated. Using this height value, the terrain position is calculated and stored in the first three channels of the positionmap (RGB) – this will be used to calculate the normalmap. The fourth channel (A) is used to store the height value itself, to be used in the heightmap. The steps in the first sentence are my primary problem. I don't understand how the pixel positions correspond to positions on the sphere and what positions are sampled for the RMF to generate the pixels if only vertices cannot be used.

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >