Search Results

Search found 30360 results on 1215 pages for 'end of life'.

Page 431/1215 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >

• wlan0 (WPA2) doesn't work when configured manually

  - by 71GA

  I have been trying to reconfigure my eth0 and wlan0 interfaces by editing /etc/network/interfaces file as folows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.11 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 auto wlan0 iface wlan0 inet static address 192.168.1.10 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 wpa-driver wext wpa-ssid lausi wpa-ap-scan 2 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk 8952a447c860d13847ba1cabd15314ba9caf2fb207f19598f90c43fcd43c0d97 But my wireless doesnt work when i use command /etc/init.d/networking restart and when i do this i get an error: * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... RTNETLINK answers: File exists Failed to bring up eth0. ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument RTNETLINK answers: File exists Failed to bring up wlan0. Although it clearly states that my eth0 interface couldn't be brought to life it is working! But i cant say this for the wlan0 interface which doesn't even work if i unplug internet cable and again use command /etc/init.d/networking restart. This seems weird to me... When i use ìfconfig -a command i get an output which confirms that wlan0 isnt working and eth0 is. ziga@ziga-cq56:/etc/network$ ifconfig -a eth0 Link encap:Ethernet HWaddr 60:eb:69:6f:5f:69 inet addr:192.168.1.11 Bcast:192.168.1.13 Mask:255.255.255.0 inet6 addr: fe80::62eb:69ff:fe6f:5f69/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6764 errors:0 dropped:0 overruns:0 frame:0 TX packets:6641 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5932190 (5.9 MB) TX bytes:1331846 (1.3 MB) Interrupt:42 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1759 errors:0 dropped:0 overruns:0 frame:0 TX packets:1759 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:107772 (107.7 KB) TX bytes:107772 (107.7 KB) wlan0 Link encap:Ethernet HWaddr 70:f3:95:e7:57:cc inet addr:192.168.1.10 Bcast:192.168.1.12 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) How can i make my wlan0 interface work? It had been working previously with network manager and wicd...

  Read the article

• What You Said: Staying Productive While Working from home

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your telecommuting/work-from-home productivity tips. Now we’re back with a tips and tricks roundup; read on to see how your fellow readers stay focused at home. By far and away the most common technique deployed as carefully isolating work from home life. Carol writes: I love working from home and have done so for 6 years now. I have a routine just as if I was going to an office, except my commute is 12 steps. I get ready for work, grab my purse and smart phone and go to up the steps to my office. I maintain a separate phone line and voice mail for work that I cannot answer from anywhere but my work desk. I use call forwarding when I travel so only my office phone number is published. I have VOIP phone service so I can forward calls from the internet if I forget, or need to change where the phone is forwarded. I do have a wired and wireless head set so I can go get a cold drink if on one of those long boring conference calls. I plan my ‘get off from work’ time and try to stick to it, as with any job some days I am late getting off, but it all works out. I make sure my office is for work only, any other computer play time is in a different part of the house on different computer. My office has laptop, dock, couple of monitors, multipurpose printer, fax, scanner, file cabinets – just like the office at a company. I just also happen to have a couple of golden retrievers that come to work with me and usually lay quietly until 5, and yes they know it is 5pm sometimes before I do. For me, one of the biggest concerns when working from home is not being unproductive, but the danger of never stopping work. You could keep going and going because let’s face it – the company will let you do it, so I set myself up to prevent that and maintain a separateness. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Movement prediction for non-shooters

  - by ShadowChaser

  I'm working on an isometric (2D) game with moderate-scale multiplayer - 20-30 players. I've had some difficulty getting a good movement prediction implementation in place. Right now, clients are authoritative for their own position. The server performs validation and broad-scale cheat detection, and I fully realize that the system will never be fully robust against cheating. However, the performance and implementation tradeoffs work well for me right now. Given that I'm dealing with sprite graphics, the game has 8 defined directions rather than free movement. Whenever the player changes their direction or speed (walk, run, stop), a "true" 3D velocity is set on the entity and a packet it sent to the server with the new movement state. In addition, every 250ms additional packets are transmitted with the player's current position for state updates on the server as well as for client prediction. After the server validates the packet, it gets automatically distributed to all of the other "nearby" players. Client-side, all entities with non-zero velocity (ie/ moving entities) are tracked and updated by a rudimentary "physics" system - basically nothing more than changing the position by the velocity according to the elapsed time slice (40ms or so). What I'm struggling with is how to implement clean movement prediction. I have the nagging suspicion that I've made a design mistake somewhere. I've been over the Unreal, Half-life, and all other movement prediction/lag compensation articles I could find, but they all seam geared toward shooters: "Don't send each control change, send updates every 120ms, server is authoritative, client predicts, etc". Unfortunately, that style of design won't work well for me - there's no 3D environment so each individual state change is important. 1) Most of the samples I saw tightly couple movement prediction right into the entities themselves. For example, storing the previous state along with the current state. I'd like to avoid that and keep entities with their "current state" only. Is there a better way to handle this? 2) What should happen when the player stops? I can't interpolate to the correct position, since they might need to walk backwards or another strange direction if their position is too far ahead. 3) What should happen when entities collide? If the current player collides with something, the answer is simple - just stop the player from moving. But what happens if two entities take up the same space on the server? What if the local prediction causes a remote entity to collide with the player or another entity - do I stop them as well? If the prediction had the misfortune of sticking them in front of a wall that the player has gone around, the prediction will never be able to compensate and once the error gets to high the entity will snap to the new position.

  Read the article

• JEP 124: Enhance the Certificate Revocation-Checking API

  - by smullan

  Revocation checking is the mechanism to determine the revocation status of a certificate. If it is revoked, it is considered invalid and should not be used. Currently as of JDK 7, the PKIX implementation of java.security.cert.CertPathValidator  includes a revocation checking implementation that supports both OCSP and CRLs, the two main methods of checking revocation. However, there are very few options that allow you to configure the behavior. You can always implement your own revocation checker, but that's a lot of work. JEP 124 (Enhance the Certificate Revocation-Checking API) is one of the 11 new security features in JDK 8. This feature enhances the java.security.cert API to support various revocation settings such as best-effort checking, end-entity certificate checking, and mechanism-specific options and parameters. Let's describe each of these in more detail and show some examples. The features are provided through a new class named PKIXRevocationChecker. A PKIXRevocationChecker instance is returned by a PKIX CertPathValidator as follows: CertPathValidator cpv = CertPathValidator.getInstance("PKIX"); PKIXRevocationChecker prc = (PKIXRevocationChecker)cpv.getRevocationChecker(); You can now set various revocation options by calling different methods of the returned PKIXRevocationChecker object. For example, the best-effort option (called soft-fail) allows the revocation check to succeed if the status cannot be obtained due to a network connection failure or an overloaded server. It is enabled as follows: prc.setOptions(Enum.setOf(Option.SOFT_FAIL)); When the SOFT_FAIL option is specified, you can still obtain any exceptions that may have been thrown due to network issues. This can be useful if you want to log this information or treat it as a warning. You can obtain these exceptions by calling the getSoftFailExceptions method: List<CertPathValidatorException> exceptions = prc.getSoftFailExceptions(); Another new option called ONLY_END_ENTITY allows you to only check the revocation status of the end-entity certificate. This can improve performance, but you should be careful using this option, as the revocation status of CA certificates will not be checked. To set more than one option, simply specify them together, for example: prc.setOptions(Enum.setOf(Option.SOFT_FAIL, Option.ONLY_END_ENTITY)); By default, PKIXRevocationChecker will try to check the revocation status of a certificate using OCSP first, and then CRLs as a fallback. However, you can switch the order using the PREFER_CRLS option, or disable the fallback altogether using the NO_FALLBACK option. For example, here is how you would only use CRLs to check the revocation status: prc.setOptions(Enum.setOf(Option.PREFER_CRLS, Option.NO_FALLBACK)); There are also a number of other useful methods which allow you to specify various options such as the OCSP responder URI, the trusted OCSP responder certificate, and OCSP request extensions. However, one of the most useful features is the ability to specify a cached OCSP response with the setOCSPResponse method. This can be quite useful if the OCSPResponse has already been obtained, for example in a protocol that uses OCSP stapling. After you have set all of your preferred options, you must add the PKIXRevocationChecker to your PKIXParameters object as one of your custom CertPathCheckers before you validate the certificate chain, as follows: PKIXParameters params = new PKIXParameters(keystore); params.addCertPathChecker(prc); CertPathValidatorResult result = cpv.validate(path, params); Early access binaries of JDK 8 can be downloaded from http://jdk8.java.net/download.html

  Read the article

• ADO and Two Way Storage Tiering

  - by Andy-Oracle

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We get asked the following question about Automatic Data Optimization (ADO) storage tiering quite a bit. Can you tier back to the original location if the data gets hot again? The answer is yes but not with standard Automatic Data Optimization policies, at least not reliably. That's not how ADO is meant to operate. ADO is meant to mirror a traditional view of Information Lifecycle Management (ILM) where data will be very volatile when first created, will become less active or cool, and then will eventually cease to be accessed at all (i.e. cold). I think the reason this question gets asked is because customers realize that many of their business processes are cyclical and the thinking goes that those segments that only get used during month end or year-end cycles could sit on lower cost storage when not being used. Unfortunately this doesn't fit very well with the ADO storage tiering model. ADO storage tiering is based on the amount of free and used space in the source tablespace. There are two parameters that control this behavior, TBS_PERCENT_USED and TBS_PERCENT_FREE. When the space in the tablespace exceeds the TBS_PERCENT_USED value then segments specified in storage tiering clause(s) can be moved until the percent of free space reaches the TBS_PERCENT_FREE value. It is worth mentioning that no checks are made for available space in the target tablespace. Now, it is certainly possible to create custom functions to control storage tiering, but this can get complicated. The biggest problem is insuring that there is enough space to move the segment back to tier 1 storage, assuming that that's the goal. This isn't as much of a problem when moving from tier 1 to tier 2 storage because there is typically more tier 2 storage available. At least that's the premise since it is supposed to be less costly, lower performing and higher capacity storage. In either case though, if there isn't enough space then the operation fails. In the case of a customized function, the question becomes do you attempt to free the space so the move can be made or do you just stop and return false so that the move cannot take place? This is really the crux of the issue. Once you cross into this territory you're really going to have to implement two-way hierarchical storage and the whole point of ADO was to provide automatic storage tiering. You're probably better off using heat map and/or business access requirements and building your own hierarchical storage management infrastructure if you really want two way storage tiering. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Silverlight Binding with multiple collections

  - by George Evjen

  We're designing some sport specific applications. In one of our views we have a gridview that is bound to an observable collection of Teams. This is pretty straight forward in terms of getting Teams bound to the GridView. <telerik:RadGridView Grid.Row="0" Grid.Column="0" x:Name="UsersGrid" ItemsSource="{Binding TeamResults}" SelectedItem="{Binding SelectedTeam, Mode=TwoWay}"> <telerik:RadGridView.Columns> <telerik:GridViewDataColumn Header="Name/Group" DataMemberBinding="{Binding TeamName}" MinWidth="150"></telerik:GridViewDataColumn> </telerik:RadGridView.Columns> </telerik:RadGridView> We use the observable collection of teams as our items source and then bind the property of TeamName to the first column. You can set the binding to mode=TwoWay, we use a dialog where we edit the selected item, so our binding here is not set to two way. The issue comes when we want to bind to a property that has another collection in it. To continue on our code from above, we have an observable collection of teams, within that collection we have a collection of KeyPeople. We get this collection using RIA Serivces with the code below. return _TeamsRepository.All().Include("KeyPerson"); Here we are getting all the teams and also including the KeyPerson entity. So when we are done with our Load we will end up with an observable collection of Teams with a navigation property / entity of KeyPerson. Within this KeyPerson entity is a list of people associated with that particular team. We want to display the head coach from this list of KeyPersons. This list currently has a list of ten or more people that are bound to this team, but we just want to display the Head Coach in the column next to team name. The issue becomes how do we bind to this included entity? I have found about three different ways to solve this issue. The way that seemed to fit us best is to utilize the features within RIA Services. We can create client side properties that will do the work for us. We will create in the client side library a partial class of Team. We will end up in our library a file that is Team.shared.cs. The code below is what we will put into our partial team class. public KeyPerson Coach        {            get            {                if (this.KeyPerson != null && this.KeyPerson.Any())                { return this.KeyPerson.Where(x => x.RelationshipType == “HeadCoach”).FirstOrDefault(); }                 return null;            }        } We will return just the person that is the Head Coach and then be able to bind that and any other additional properties that we need. <telerik:GridViewDataColumn Header="Coach" DataMemberBinding="{Binding Coach.Name}" MinWidth="150"></telerik:GridViewDataColumn> There are other ways that we could have solved this issue but we felt that creating a partial class through RIA Services best suited our needs.

  Read the article

• Is Visual Source Safe (The latest Version) really that bad? Why? What's the Best Alternative? Why? [closed]

  - by hanzolo

  Over the years I've constantly heard horror stories, had people say "Real Programmers Dont Use VSS", and so on. BUT, then in the workplace I've worked at two companies, one, a very well known public facing high traffic website, and another high end Financial Services "Web-Based" hosted solution catering to some very large, very well known companies, which is where I currently Reside and everything's working just fine (KNOCK KNOCK!!). I'm constantly interfacing with EXTREMELY Old technology with some of these financial institutions.. OLD LIKE YOU WOULDN'T BELIEVE.. which leads me to the conclusion that if it works "LEAVE IT", and that maybe there's some value in old technology? at least enough value to overrule a rewrite!? right?? Is there something fundamentally flawed with the underlying technology that VSS uses? I have a feeling that if i said "someone said VSS Sucks" they would beg to differ, most likely give me this look like i dont know -ish, and I'd never gain back their respect and my credibility (well, that'll be hard to blow.. lol), BUT, give me an argument that I can take to someone whose been coding for 30 years, that builds Platforms that leverage current technology (.NET 3.5 / SQL 2008 R2 ), write's their own ORM with scaffolding and is able to provide a quality platform that supports thousands of concurrent users on a multi-tenant hosted solution, and does not agree with any benefits from having Source Control Integrated, and yet uses the Infamous Visual Source Safe. I have extensive experience with TFS up to 2010, and honestly I think it's great when a team (beyond developers) can embrace it. I've worked side by side with someone whose a die hard SVN'r and from a purist standpoint, I see the beauty in it (I need a bit more, out of my SS, but it surely suffices). So, why are such smarties not running away from Visual Source Safe? surely if it was so bad, it would've have been realized by now, and I would not be sitting here with this simple old, Check In, Check Out, Version Resistant, Label Intensive system. But here I am... I would love to drop an argument that would be the end all argument, but if it's a matter of opinion and personal experience, there seems to be too much leeway for keeping VSS. UPDATE: I guess the best case is to have the VSS supporters check other people's experiences and draw from that until we (please no) experience the breaking factor ourselves. Until then, i wont be engaging in a discussion to migrate off of VSS.. UPDATE 11-2012: So i was able to convince everyone at my work place that since MS is sun downing Visual Source Safe it might be time to migrate over to TFS. I was able to convince them and have recently upgraded our team to Visual Studio 2012 and TFS 2012. The migration was fairly painless, had to run analyze.exe which found a bunch of errors (not sure they'll ever affect the project) and then manually run the VSSConverter.exe. Again, painless, except it took 16 hours to migrate 5 years worth of everything.. and now we're on TFS.. much more integrated.. much more cooler.. so all in all, VSS served it's purpose for years without hick-up. There were no horror stories and Visual Source Save as source control worked just fine. so to all the nay sayers (me included). there's nothing wrong with using VSS. i wouldnt start a new project with it, and i would definitely consider migrating to TFS. (it's really not super difficult and a new "wizard" type converter is due out any day now so migrating should be painless). But from my experience, it worked just fine and got the job done.

  Read the article

• Broken Views

  - by Ajarn Mark Caldwell

  “SELECT *” isn’t just hazardous to performance, it can actually return blatantly wrong information. There are a number of blog posts and articles out there that actively discourage the use of the SELECT * FROM …syntax.  The two most common explanations that I have seen are: Performance:  The SELECT * syntax will return every column in the table, but frequently you really only need a few of the columns, and so by using SELECT * your are retrieving large volumes of data that you don’t need, but the system has to process, marshal across tiers, and so on.  It would be much more efficient to only select the specific columns that you need. Future-proof:  If you are taking other shortcuts in your code, along with using SELECT *, you are setting yourself up for trouble down the road when enhancements are made to the system.  For example, if you use SELECT * to return results from a table into a DataTable in .NET, and then reference columns positionally (e.g. myDataRow[5]) you could end up with bad data if someone happens to add a column into position 3 and skewing all the remaining columns’ ordinal position.  Or if you use INSERT…SELECT * then you will likely run into errors when a new column is added to the source table in any position. And if you use SELECT * in the definition of a view, you will run into a variation of the future-proof problem mentioned above.  One of the guys on my team, Mike Byther, ran across this in a project we were doing, but fortunately he caught it while we were still in development.  I asked him to put together a test to prove that this was related to the use of SELECT * and not some other anomaly.  I’ll walk you through the test script so you can see for yourself what happens. We are going to create a table and two views that are based on that table, one of them uses SELECT * and the other explicitly lists the column names.  The script to create these objects is listed below. IF OBJECT_ID('testtab') IS NOT NULL DROP TABLE testtabgoIF OBJECT_ID('testtab_vw') IS NOT NULL DROP VIEW testtab_vwgo IF OBJECT_ID('testtab_vw_named') IS NOT NULL DROP VIEW testtab_vw_namedgo CREATE TABLE testtab (col1 NVARCHAR(5) null, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col2)VALUES ('A','B'), ('A','B')GOCREATE VIEW testtab_vw AS SELECT * FROM testtabGOCREATE VIEW testtab_vw_named AS SELECT col1, col2 FROM testtabgo Now, to prove that the two views currently return equivalent results, select from them. SELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named OK, so far, so good.  Now, what happens if someone makes a change to the definition of the underlying table, and that change results in a new column being inserted between the two existing columns?  (Side note, I normally prefer to append new columns to the end of the table definition, but some people like to keep their columns alphabetized, and for clarity for later people reviewing the schema, it may make sense to group certain columns together.  Whatever the reason, it sometimes happens, and you need to protect yourself and your code from the repercussions.) DROP TABLE testtabgoCREATE TABLE testtab (col1 NVARCHAR(5) null, col3 NVARCHAR(5) NULL, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col3, col2)VALUES ('A','C','B'), ('A','C','B')goSELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named I would have expected that the view using SELECT * in its definition would essentially pass-through the column name and still retrieve the correct data, but that is not what happens.  When you run our two select statements again, you see that the View that is based on SELECT * actually retrieves the data based on the ordinal position of the columns at the time that the view was created.  Sure, one work-around is to recreate the View, but you can’t really count on other developers to know the dependencies you have built-in, and they won’t necessarily recreate the view when they refactor the table. I am sure that there are reasons and justifications for why Views behave this way, but I find it particularly disturbing that you can have code asking for col2, but actually be receiving data from col3.  By the way, for the record, this entire scenario and accompanying test script apply to SQL Server 2008 R2 with Service Pack 1. So, let the developer beware…know what assumptions are in effect around your code, and keep on discouraging people from using SELECT * syntax in anything but the simplest of ad-hoc queries. And of course, let’s clean up after ourselves.  To eliminate the database objects created during this test, run the following commands. DROP TABLE testtabDROP VIEW testtab_vwDROP VIEW testtab_vw_named

  Read the article

• The type of programmer I want to be [closed]

  - by Aventinus_

  I'm an undergraduate Software Engineer student, although I've decided that pure programming is what I want to do for the rest of my life. The thing is that programming is a vast field and although most of its aspects are extremely interesting, soon or later I'll have to choose one (?) to focus on. I have several ideas on small projects I'd like to develop this summer, having in mind that this will gain me some experience and, in the best scenario, some cash. But the most important reason I'd like to develop something close to “professional” is to give myself direction on what I want to do as a programmer. One path is that of the Web Programmer. I enjoy PHP and MySQL, as well as HTML and CSS, although I don't really like ASP.NET. I can see myself writing web apps, using the above technologies, as well as XML and Javascript. I also have a neat idea on a Facebook app. The other path is that of the Desktop Programmer. This is a little more complicated cause I really-really enjoy high level languages such as Java and Python but not the low level ones, such as C. I use both Linux and Windows for the last 6 years and I like their latest DEs (meaning Gnome Shell and Metro). I can see myself writing desktop applications for both OSs as long as it means high level programming. Ideally I'd like being able to help the development of GNOME. The last path that interests me is the path of the Smartphone Programmer. I have created some sample applications on Android and due to Java I found it a quite interesting experience. I can also see myself as an independent smartphone developer. These 3 paths seem equally interesting at the moment due to the shallowness of my experience, I guess. I know that I should spend time with all of them and then choose the right one for me but I'd like to know what are the pros and cons in terms of learning curve, fun, job finding and of course financial rewards with each of these paths. I have fair or basic understanding of the languages/technologies I described earlier and this question will help me choose where to focus, at least for now.

  Read the article

• What OpenGL version(s) to learn and/or use?

  - by zuko

  So, I'm new to OpenGL... I have general knowledge of game programming but little practical experience. I've been looking into various articles and books and trying to dive into OpenGL, but I've found the various versions and old vs new way of doing things confusing. I guess my first questions is does anyone know some figures about percentages of gamers that can run each version of OpenGL. What's the market share like? 2.x, 3.x, 4.x... I looked into the requirements for Half Life 2 since I know Valve updated it with OpenGL to run on Mac and I know they usually try to hit a very wide user-base, and they say a minimum of GeForce 8 Series. I looked at the 8800 GT on Nvidia's website and it listed support for OpenGL 2.1. Which, maybe I'm wrong, sounds ancient to me since there's already 4.x. I looked up a driver for 8800GT and it says it supports 4.2! A bit of a discrepancy there, lol. I've also read things like XP only supports up to a certain version, or OS X only supports 3.2, or all kinds of other things. Overall, I'm just confused as to how much support there is for various versions and what version to learn/use. I'm also looking for learning resources. My search results thus far have pointed me to the OpenGL SuperBible. The 4th edition has great reviews on Amazon, but it teaches 2.1. The 5th edition teaches 3.3 and there are a couple things in the reviews that mention the 4th edition is better and that the 5th edition doesn't properly teach the new features or something? Basically, even within learning material I'm seeing discrepancies and I just don't even know where to start. From what I understand, 3.x started a whole new way of doing things and I've read from various articles and reviews that you want to "stay away from deprecated features like glBegin(), glEnd()" yet a lot of books and tutorials I've seen use that method. I've seen people saying that, basically, the new way of doing stuff is more complicated yet the old way is bad . Just a side note, personally, I know I still have a lot to learn beforehand, but I'm interested in tessellation; so I guess that factors into it as well, because, as far as I understand that's only in 4.x? [just btw, my desktop supports 4.2]

  Read the article

• RPi and Java Embedded GPIO: It all begins with hardware

  - by hinkmond

  So, you want to connect low-level peripherals (like blinky-blinky LEDs) to your Raspberry Pi and use Java Embedded technology to program it, do you? You sick foolish masochist. No, just kidding! That's awesome! You've come to the right place. I'll step you though it. And, as with many embedded projects, it all begins with hardware. So, the first thing to do is to get acquainted with the GPIO header on your RPi board. A "header" just means a thingy with a bunch of pins sticking up from it where you can connect wires. See the the red box outline in the photo. Now, there are many ways to connect to that header outlined by the red box in the photo (which the RPi folks call the P1 header). One way is to use a breakout kit like the one at Adafruit. But, we'll just use jumper wires in this example. So, to connect jumper wires to the header you need a map of where to connect which wire. That's why you need to study the pinout in the photo. That's your map for connecting wires. But, as with many things in life, it's not all that simple. RPi folks have made things a little tricky. There are two revisions of the P1 header pinout. One for older boards (RPi boards made before Sep 2012), which is called Revision 1. And, one for those fancy 512MB boards that were shipped after Sep 2012, which is called Revision 2. So, first make sure which board you have: either you have the Model A or B with 128MB or 256MB built before Sep 2012 and you need to look at the pinout for Rev. 1, or you have the Model B with 512MB and need to look at Rev. 2. That's all you need for now. More to come... Hinkmond

  Read the article

• installer can't find partition, but fdisk can find them

  - by pxd

  I'm installing ubuntu 12.04, my system had install 2 system -- winxp and ubuntu 10.10. Now, I want to update ubuntu to 12.04. I use usb disk to install 12.04. But, the installer can't not find my partition in my harddisk. But, the fdisk can find them. Can you help me? How to do? ubuntu@ubuntu:~$ sudo lshw -short H/W path Device Class Description system HP 2230s (NN868PA#AB2) /0 bus 3037 /0/9 memory 64KiB BIOS /0/0 processor Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz /0/0/1 memory 2MiB L2 cache /0/0/3 memory 32KiB L1 cache /0/0/0.1 processor Logical CPU /0/0/0.2 processor Logical CPU /0/2 memory 32KiB L1 cache /0/4 memory 2GiB System Memory /0/4/0 memory SODIMM [empty] /0/4/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1.2 ns) /0/100 bridge Mobile 4 Series Chipset Memory Controller Hub /0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4 /0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5 /0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6 /0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2 /0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller /0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1 /0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port 2 /0/100/1c.1/0 wlan1 network PRO/Wireless 5100 AGN [Shiloh] Network Connection /0/100/1c.2 bridge 82801I (ICH9 Family) PCI Express Port 3 /0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express Port 5 /0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6 /0/100/1c.5/0 eth1 network 88E8072 PCI-E Gigabit Ethernet Controller /0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1 /0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2 /0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3 /0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1 /0/100/1e bridge 82801 Mobile PCI Bridge /0/100/1f bridge ICH9M LPC Interface Controller /0/100/1f.2 scsi0 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] /0/100/1f.2/0 /dev/sda disk 500GB WDC WD5000BEVT-0 /0/100/1f.2/0/1 /dev/sda1 volume 48GiB Windows NTFS volume /0/100/1f.2/0/2 /dev/sda2 volume 416GiB Extended partition /0/100/1f.2/0/2/5 /dev/sda5 volume 97GiB HPFS/NTFS partition /0/100/1f.2/0/2/6 /dev/sda6 volume 198GiB HPFS/NTFS partition /0/100/1f.2/0/2/7 /dev/sda7 volume 27GiB Linux filesystem partition /0/100/1f.2/0/2/8 /dev/sda8 volume 93GiB Linux filesystem partition /0/100/1f.2/1 /dev/cdrom disk CDDVDW TS-L633M /0/1 scsi6 storage /0/1/0.0.0 /dev/sdb disk 15GB STORAGE DEVICE /0/1/0.0.0/0 /dev/sdb disk 15GB /0/1/0.0.0/0/1 /dev/sdb1 volume 14GiB Windows FAT volume /1 power HZ04037 ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31263125 Device Boot Start End Blocks Id System /dev/sda1 * 63 102277727 51138832+ 7 HPFS/NTFS/exFAT /dev/sda2 102277728 976784129 437253201 f W95 Ext'd (LBA) /dev/sda5 102277791 307078127 102400168+ 7 HPFS/NTFS/exFAT /dev/sda6 307078191 724141151 208531480+ 7 HPFS/NTFS/exFAT /dev/sda7 724142080 781459455 28658688 83 Linux /dev/sda8 781461504 976771071 97654784 83 Linux Disk /dev/sdb: 15.9 GB, 15931539456 bytes 64 heads, 32 sectors/track, 15193 cylinders, total 31116288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009eb92 Device Boot Start End Blocks Id Systemfile:///home/ubuntu/Pictures/Screenshot%20from%202012-07-07%2010:25:40.png /dev/sdb1 * 32 31115263 15557616 c W95 FAT32 (LBA) ubuntu 12.04 installer can't find the partition in my hard disk, only find device - /dev/sda.(sorry, I'm new user, so can't send image.)

  Read the article

• What do you need to know to be a world-class master software developer? [closed]

  - by glitch

  I wanted to bring up this question to you folks and see what you think, hopefully advise me on the matter: let's say you had 30 years of learning and practicing software development in front of you, how would you dedicate your time so that you'd get the biggest bang for your buck. What would you both learn and work on to be a world-class software developer that would make a large impact on the industry and leave behind a legacy? I think that most great developers end up being both broad generalists and specialists in one-two areas of interest. I'm thinking Bill Joy, John Carmack, Linus Torvalds, K&R and so on. I'm thinking that perhaps one approach would be to break things down by categories and establish a base minimum of "software development" greatness. I'm thinking: Operating Systems: completely internalize the core concepts of OS, perhaps gain a lot of familiarity with an OSS one such as Linux. Anything from memory management to device drivers has to be complete second nature. Programming Languages: this is one of those topics that imho has to be fully grokked even if it might take many years. I don't think there's quite anything like going through the process of developing your own compiler, understanding language design trade-offs and so on. Programming Language Pragmatics is one of my favorite books actually, I think you want to have that internalized back to back, and that's just the start. You could go significantly deeper, but I think it's time well spent, because it's such a crucial building block. As a subset of that, you want to really understand the different programming paradigms out there. Imperative, declarative, logic, functional and so on. Anything from assembly to LISP should be at the very least comfortable to write in. Contexts: I believe one should have experience working in different contexts to truly be able to appreciate the trade-offs that are being made every day. Embedded, web development, mobile development, UX development, distributed, cloud computing and so on. Hardware: I'm somewhat conflicted about this one. I think you want some understanding of computer architecture at a low level, but I feel like the concepts that will truly matter will be slightly higher level, such as CPU caching / memory hierarchy, ILP, and so on. Networking: we live in a completely network-dependent era. Having a good understanding of the OSI model, knowing how the Web works, how HTTP works and so on is pretty much a pre-requisite these days. Distributed systems: once again, everything's distributed these days, it's getting progressively harder to ignore this reality. Slightly related, perhaps add solid understanding of how browsers work to that, since the world seems to be moving so much to interfacing with everything through a browser. Tools: Have a really broad toolset that you're familiar with, one that continuously expands throughout the years. Communication: I think being a great writer, effective communicator and a phenomenal team player is pretty much a prerequisite for a lot of a software developer's greatness. It can't be overstated. Software engineering: understanding the process of building software, team dynamics, the requirements of the business-side, all the pitfalls. You want to deeply understand where what you're writing fits from the market perspective. The better you understand all of this, the more of your work will actually see the daylight. This is really just a starting list, I'm confident that there's a ton of other material that you need to master. As I mentioned, you most likely end up specializing in a bunch of these areas as you go along, but I was trying to come up with a baseline. Any thoughts, suggestions and words of wisdom from the grizzled veterans out there who would like to share their thoughts and experiences with this? I'd really love to know what you think!

  Read the article

• Building Enterprise Smartphone App &ndash; Part 3: Key Concerns

  - by Tim Murphy

  This is part 3 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Keys Concerns Of Smartphones In The Enterprise These are the factors that you need to be aware of and address in order to build successful enterprise smartphone applications.  Most of them have nothing to do with the application itself as you will see here. Managing Devices Managing devices is a factor that is going to effect how much your company will have to spend outside of developing the applications.  How will you track the devices within the corporation?  How often will you have to replace phones and as a consequence have to upgrade your applications to support new phones?  The devices can represent a significant investment of capital.  If these questions are not addressed you will find a number of hidden costs throughout the life of your solution. Purchase or BYOD We have seen the trend of Bring Your Own Device (BYOD) lately within the enterprise.  How many meetings have you been in where someone is on their personal iPad, iPhone, Android phone or Windows Phone?  The issue is if you can afford to support everyone's choice in device? That is a lot to take on even if you only support the current release of each platform. Do you go with the most popular device or do you pick a platform that best matches your current ecosystem and distribute company owned devices?  There is no easy answer here, but you should be able give some dollar value to both hardware and development costs related to platform coverage. Asset Tracking/Insurance Smartphones are devices that are easier to lose or have stolen than laptops and desktops. Not only do you have your normal asset management concerns but also assignment of financial responsibility. You also will need to insure them against damage and theft and add legal documents that spell out the responsibilities of the employees that use these devices. Personal vs. Corporate Data What happens when you terminate an employee?  How do you recover the device?  What happens when they have put personal data on the device?  These are all situation that can cause possible loss of corporate intellectual property or legal repercussions of reclaiming a device with personal data on it.  Policies need to be put in place that protect the company from being exposed to type of loss.  This can mean significant legal and procedural cost that you need to consider. Coming Up In the last installment of this series I will cover application development considerations. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

  Read the article

• Don’t string together XML

  - by KyleBurns

  XML has been a pervasive tool in software development for over a decade.  It provides a way to communicate data in a manner that is simple to understand and free of platform dependencies.  Also pervasive in software development is what I consider to be the anti-pattern of using string manipulation to create XML.  This usually starts with a “quick and dirty” approach because you need an XML document and looks like (for all of the examples here, we’ll assume we’re writing the body of a method intended to take a Contact object and return an XML string): return string.Format("<Contact><BusinessName>{0}</BusinessName></Contact>", contact.BusinessName);   In the code example, I created (or at least believe I created) an XML document representing a simple contact object in one line of code with very little overhead.  Work’s done, right?  No it’s not.  You see, what I didn’t realize was that this code would be used in the real world instead of my fantasy world where I own all the data and can prevent any of it containing problematic values.  If I use this code to create a contact record for the business “Sanford & Son”, any XML parser will be incapable of processing the data because the ampersand is special in XML and should have been encoded as &amp;. Following the pattern that I have seen many times over, my next step as a developer is going to be to do what any developer in his right mind would do – instruct the user that ampersands are “bad” and they cannot be used without breaking computers.  This may work in many cases and is often accompanied by logic at the UI layer of applications to block these “bad” characters, but sooner or later someone is going to figure out that other applications allow for them and will want the same.  This often leads to the creation of “cleaner” functions that perform a replace on the strings for every special character that the person writing the function can think of.  The cleaner function will usually grow over time as support requests reveal characters that were missed in the initial cut.  Sooner or later you end up writing your own somewhat functional XML engine. I have never been told by anyone paying me to write code that they would like to buy a somewhat functional XML engine.  My employer/customer’s needs have always been for something that may use XML, but ultimately is functionality that drives business value. I’m not going to build an XML engine. So how can I generate XML that is always well-formed without writing my own engine?  Easy – use one of the ones provided to you for free!  If you’re in a shop that still supports VB6 applications, you can use the DomDocument or MXXMLWriter object (of the two I prefer MXXMLWriter, but I’m not going to fully describe either here).  For .Net Framework applications prior to the 3.5 framework, the code is a little more verbose than I would like, but easy once you understand what pieces are required:             using (StringWriter sw = new StringWriter())             {                 using (XmlTextWriter writer = new XmlTextWriter(sw))                 {                     writer.WriteStartDocument();                     writer.WriteStartElement("Contact");                     writer.WriteElementString("BusinessName", contact.BusinessName);                     writer.WriteEndElement(); // end Contact element                     writer.WriteEndDocument();                     writer.Flush();                     return sw.ToString();                 }             }   Looking at that code, it’s easy to understand why people are drawn to the initial one-liner.  Lucky for us, the 3.5 .Net Framework added the System.Xml.Linq.XElement object.  This object takes away a lot of the complexity present in the XmlTextWriter approach and allows us to generate the document as follows: return new XElement("Contact", new XElement("BusinessName", contact.BusinessName)).ToString();   While it is very common for people to use string manipulation to create XML, I’ve discussed here reasons not to use this method and introduced powerful APIs that are built into the .Net Framework as an alternative.  I’ve given a very simplistic example here to highlight the most basic XML generation task.  For more information on the XmlTextWriter and XElement APIs, check out the MSDN library.

  Read the article

• How do you feel about being asked to code during an interview?

  - by Mystere Man

  I have seen a lot of comments about good interview questions and puzzles to require potential developers to solve during the interview process. I have personally had several interviews in which the interviewer has asked me to write some piece of code or solve a problem during the interview, and I have always performed very poorly in these "tests". The reason is simple, as a developer who spends my days talking to computers, I find I have to prepare myself and "switch gears" to be in "interview mode". I prepare myself to make a good impression. When I'm programming, I'm very focused and am totally different from when I'm being "interpersonal". I just can't get into "the zone" when I'm also having to be a charming and witty potential employee. I feel that by asking a developer to prove his skills during an interview, all you're doing is finding out if they can code under pressure, and at the drop of a hat. It has almost no ability to determine how you would perform in a "real life" development situation. Maybe, if you're looking for someone that can code and chat at the same time, i can see how that would be beneficial. But I think you overlook potential candidates that simply do not perform well in such an artificial environment. While I appreciate that a potential employer wants to see what I can do, I don't think an interview is the place for such a test. I mean, suppose a job for an over the road trucker required that you drive while being interviewed. How does that really end well? So I'm curious as to what others think about such situations. Have you failed interviews because you were not in the right frame of mind? Have you failed to make a good interpersonal impression because you were too distracted trying to solve the problem? If you're a hiring manager, or someone that gives interviews, do you even think about such things? Is it really important that someone perform well in an interview? EDIT: To clarify, I'm not against testing applicants. My concern is about testing during an interview. See also: What are the pros and cons for the employer of code questions during an interview? looking at this from the interviewer's point of view.

  Read the article

• Spotlight on an office - Moscow

  - by Maria Sandu

  Probably the most famous place in Moscow, after Red Square, is the centre of Moscow. Here you can find beautiful buildings that seem to touch the sky, located on the banks of the river. In one of these high towers you can find the Oracle offices, friendly and modern. The stunning view will keep capture your attention for a couple of minutes and then you can enjoy a delicious coffee and take a seat at your desk, starting a new day. My name is Dmitry and I can tell you that we’re enjoying every minute spent in the office and that’s because of the pleasant atmosphere. As soon as you enter the offices, the friendly environment will make you feel more relaxed. Even though the space is split between the different departments, we interact and communicate a lot. We take our cup of coffee or tea together and discuss our achievements and all sort of subjects in the kitchen or in the open space. One of my favorite parts are the festive events when we celebrate with cakes and goodies. Any birthday or new arrival is a good reason for a tea party! We have some work-related traditions that help us as employees. One of them is the monthly Tech Hour when Experts from the Pre-sales team discuss technical topics and about the most recent innovations within the company. Lunch is another good opportunity to interact and chat. We have a variety of options, such as the two kitchens or the vast number of restaurants where you can serve up anything you want. As we are right in the centre of Moscow, you can choose between Sushi, Italian Pasta and all sorts of food. We usually go with our colleagues to have lunch. If you care about your health, I have very good news for you as nearby there are two first-class fitness centres with swimming pools, yoga and various sport classes that you can attend. My suggestion would be to either start or end your day with a visit to the swimming pool for a well-deserved hour of relaxation. As I mentioned before, we’re right in the heart of Moscow, so after work you can spend some time in the large shopping centers where you can choose between many different entertainment options. We often go to bowling or to the cinema. I hope I have given you a glimpse into working life at the Oracle offices in Moscow, a really great and pleasant place to work in, so follow us on http://campus.oracle.com for our latest vacancies and internships.

  Read the article

• Appropriate design / technologies to handle dynamic string formatting?

  - by Mark W

  recently I was tasked with implementing a way of adding support for versioning of hardware packet specifications to one of our libraries. First a bit of information about the project. We have a hardware library which has classes for each of the various commands we support sending to our hardware. These hardware modules are essentially just lights with a few buttons, and a 2 or 4 digit display. The packets typically follow the format {SOH}AADD{ETX}, where AA is our sentinel action code, and DD is the device ID. These packet specs are different from one command to the next obviously, and the different firmware versions we have support different specifications. For example, on version 1 an action code of 14 may have a spec of {SOH}AADDTEXT{ETX} which would be AA = 14 literal, DD = device ID, TEXT = literal text to display on the device. Then we come out with a revision with adds an extended byte(s) onto the end of the packet like this {SOH}AADDTEXTE{ETX}. Assume the TEXT field is fixed width for this example. We have now added a new field onto the end which could be used to say specify the color or flash rate of the text/buttons. Currently this java library only supports one version of the commands, the latest. In our hardware library we would have a class for this command, say a DisplayTextArgs.java. That class would have fields for the device ID, the text, and the extended byte. The command class would expose a method which generates the string ("{SOH}AADDTEXTE{ETX}") using the value from the class. In practice we would create the Args class as needed, populate the fields, call the method to get our packet string, then ship that down across the CAN. Some of our other commands specification can vary for the same command, on the same version, depending on some runtime state. For example, another command for version 1 may be {SOH}AA{ETX}, where this action code clears all of the modules behind a specific controller device of their text. We may overload this packet to have option fields with multiple meanings like {SOH}AAOC{ETX} where OC is literal text, which tells the controller to only clear text on a specific module type, and to leave the others alone, or the spec could also have an option format of {SOH}AADD{ETX} to clear the text off a a specific device. Currently, in the method which generates the packet string, we would evaluate fields on the args class to determine which spec we will be using when formatting the packet. For this example, it would be along the lines of: if m_DeviceID != null then use {SOH}AADD{ETX} else if m_ClearOCs == true then use {SOH}AAOC{EXT} else use {SOH}AA{ETX} I had considered using XML, or a database to store String.format format strings, which were linked to firmware version numbers in some table. We would load them up at startup, and pass in the version number of the hardwares firmware we are currently using (I can query the devices for their firmware version, but the version is not included in all packets as part of the spec). This breaks down pretty quickly because of the dynamic nature of how we select which version of the command to use. I then considered using a rule engine to possibly build out expressions which could be interpreted at runtume, to evaluate the args class's state, and from that select the appropriate format string to use, but my brief look at rule engines for java scared me away with its complexity. While it seems like it might be a viable solution, it seems overly complex. So this is why I am here. I wouldn't say design is my strongest skill, and im having trouble figuring out the best way to approach this problem. I probably wont be able to radically change the args classes, but if the trade off was good enough, I may be able to convince my boss that the change is appropriate. What I would like from the community is some feedback on some best practices / design methodologies / API or other resources which I could use to accomplish: Logic to determine which set of commands to use for a given firmware version Of those command, which version of each command to use (based on the args classes state) Keep the rules logic decoupled from the application so as to avoid needing releases for every firmware version Be simple enough so I don't need weeks of study and trial and error to implement effectively.

  Read the article

• The Minimalist Approach to Content Governance - Manage Phase

  - by Kellsey Ruppel

  Originally posted by John Brunswick. Most people would probably agree that creating content is the enjoyable part of the content life cycle. Management, on the other hand, is generally not. This is why we thankfully have an opportunity to leverage meta data, security and other settings that have been applied or inherited in the prior parts of our governance process. In the interests of keeping this process pragmatic, there is little day to day activity that needs to happen here. Most of the activity that happens post creation will occur in the final "Retire" phase in which content may be archived or removed. The Manage Phase will focus on updating content and the meta data associated with it - specifically around ownership. Often times the largest issues with content ownership occur when a content creator leaves and organization or changes roles within an organization.   1. Update Content Ownership (as needed and on a quarterly basis) Why - Without updating content to reflect ownership changes it will be impossible to continue to meaningfully govern the content. How - Run reports against the meta data (creator and department to which the creator belongs) on content items for a particular user that may have left the organization or changed job roles. If the content is without and owner connect with the department marked as responsible. The content's ownership should be reassigned or if the content is no longer needed by that department for some reason it can be archived and or deleted. With a minimal investment it is possible to create reports that use an LDAP or Active Directory system to contrast all noted content owners versus the users that exist in the directory. The delta will indicate which content will need new ownership assigned. Impact - This implicitly keeps your repository and search collection clean. A very large percent of content that ends up no longer being useful to an organization falls into this category. This management phase (automated if possible) should be completed every quarter or as needed. The impact of actually following through with this phase is substantial and will provide end users with a better experience when browsing and searching for content.

  Read the article

• Laptop freezes and seems to crash, but continues working after waiting for a few minutes [closed]

  - by Corwin

  I've had this old notebook laying around and because i was missing a second machine (My wife usually steals the first ;) ) I considered installing Linux. As a php developer I work with Linux servers (usually fedora) on a daily basis and because its an older machine that I want to use for development, linux seemed the best option. Speedwise I expected a good experience, better than Windows 7 on the same machine. The results where terrible. I tried ubuntu 12.04. The shell never got past showing the background. The system doesn't freeze since the mouse still works and I can use ctrl+alt+f2 etc to enter terminal mode. I expected hardware problems en even exchanged the harddisk en Ram memory. No luck though, so I started over and tried 11.10 Same results so I tried 10.04.4 which did install properly. Not sure if unity was the problem, but it seems likely. But then I tried simply things like surfing on the net, the system frooze and I thought it crashed so after a few minutes I pulled the plug and rebooted. But it happened again and I waited. After a few minutes the system came back to life like nothing happened. Long story short. Besides the fact that the entire interface is very sluggish, any and all graphical functions freezes the system. The more elaborate the animation would be, the longer it freezes. I switch chromium from window to fullscreenmode and had to wait 15 minutes to continue. I don't see the animation that's probably supposed to be in between. It just freezes and then after unfreezing its fullscreen. I don't think its a bug. I suspect the problem is with my graphics card. Like I said, its and old system. So old that I can't even find the original Ati drivers anywere. (I'll post the details of my system at the end of my post) I'm at a loss as to what to do next. I tried other Distro's. So far only dreamlinux works normally. Linux Mint won't start as a live CD. I think I simply need a driver update but I can't find them anywhere. Does anyone have the same experience ? Maybe even someone who has or had the same notebook running Ubuntu at some point ? Anyway, here are the specs: http://www.nec-driver.com/nec-driver/NEC-Versa-P550---FP550-Driver_421.html

  Read the article

• How to be Agile when new work keeps affecting completed work?

  - by jdln

  The project I'm working on is to re-skin an existing website. The functionally will stay the same, its just the styles that are changing. The HTML is not changing, I'm only modifying the CSS files. The site is pretty complex. There are dozens of pages. Users can be logged in and have a number of different roles. Depending on their role the content of the page and what pages they are allowed to see varys. We're using GIT and Github. I'm trying to write CSS that works as components. So when the same form elements, headings, etc appear on multiple pages they are already styled and are consistent. Most of time this is working well. Sadly the format and class names in the HTML are at times messy and unpredictable. When I fix something on one page it can break another. The job is also harder as no one knows exactly all the variations that are possible due to the user roles. As such I'm continuously finding new variations as I go along. I'm making headway by putting a lot of comments in my CSS. If I need to remove a CSS rule Ill comment it out so I can still see it with the chrome dev tools, and ill put a comment in the CSS saying why I removed it and for what page this was done. This means that if on another page I'm about to add add the rule to fix a different problem, there is more of a chance I will see how this would break the first page. This allows me to either find a different solution that will work for both pages, or I can make the override page specific. This has been working quite well for me. If I had complete free reign and the only deadline was to finish the project by the end then this method would be fine. However my manager is trying to mitigate risk by breaking the work into areas to be completed per sprint. This is counter to how I have been approaching things as something like my typography styles will affect all other pages on the site. The other issue is that the different stakeholders want to sign off each section as I go along. However once I've finished a section it may change if I change CSS that affects it and also affects a new section I'm working on. I've asked that the stakeholders have a quick unofficial sign off in stages (eg per sprint), and have the final official sign off at the end of the project, but this is being met with resistance. I do understand why it would be higher risk to do this, but the only way to guarantee that a signed off section will not change is to make ALL future changes page specific. In addition to this I'm being told that all work that I push to the Git repo should be ready to go live, and as such should not contain any code comments. This is risky for me as I wont know until I've finished the site if I will ever benefit from these comments or not. Has anyone else been in a similar situation and managed to find a compromise that worked for my development approach and also the desires of management and stakeholders to have a more Agile approach? A more Agile workflow works great when you can break the work into components and know that once something is done it wont be affected by future work. However the nature of this project makes this hard to achieve.

  Read the article

• Slide 2d Vector to destination over a period of time

  - by SchautDollar

  I am making a library of GUI controls for games I make with XNA. I am currently developing the library as I make a game so I can test the features and find errors/bugs and hopefully smash them right away. My current issue is on a slide feature I want to implement for my base class that all controls inherit. My goal is to get the control to slide to a specified point over a specified amount of time. Here is the #region containing the code #region Slide private bool sliding; private Vector2 endPoint; private float slideTimeLeft; private float speed; private bool wasEnabled; private Vector2 slideDirection; private float slideDistance; public void Slide(Vector2 startPoint, Vector2 endPoint, float slideTime) { this.location = startPoint; Slide(endPoint,slideTime); } public void Slide(Vector2 endPoint, float slideTime) { this.wasEnabled = this.enabled; this.enabled = false; this.sliding = true; Vector2 tempLength = endPoint - this.location; this.slideDistance = tempLength.Length(); //Was this.slideDistance = (float)Math.Sqrt(tempLength.LengthSquared()); this.speed = slideTime / this.slideDistance; this.endPoint = endPoint; this.slideTimeLeft = slideTime; } private void UpdateSlide(GameTime gameTime) { if (this.sliding) { this.slideTimeLeft -= gameTime.ElapsedGameTime.Milliseconds; if (this.slideTimeLeft >= 0 ) { if ((this.endPoint-this.location).Length() != 0){//Was if (this.endPoint.LengthSquared() > 0 || this.location.LengthSquared() > 0) { this.slideDirection = Vector2.Normalize(this.endPoint - this.location); } this.location += this.slideDirection * speed * gameTime.ElapsedGameTime.Milliseconds;//This is where I believe the issue is, but I'm not sure. It seems right to me... (Even though it doesn't work) } else { this.enabled = this.wasEnabled; this.location = this.endPoint;//After time, the controls position will get set to be the endpoint. this.sliding = false; } } } #endregion this.location is the location of the control elsewhere defined in the class. I have looked at this blog as a huge reference and have googled around quite and have looked on many forums but can't find anything that shows how to implement it. Please and Thanks for your time! EDIT: I have switched this line "this.location += this.slideDirection * speed * gameTime.ElapsedGameTime.Milliseconds;" several times to see what it does. My issue is getting the control to smoothly move to the end location. It moves after the time has expired, but It doesn't move other then that except flash in my face. EDIT2: I have used the first slide method with 3 parameters and it works except it doesn't do it in a period of time and once it gets to its destination, it starts moving randomly towards the previous location and the end location.

  Read the article

• A programmer who doesn't get to program - where to turn? [closed]

  - by Just an Anon

  I'm in my mid 20's, and have been working as a full time programmer / developer for the last ~6 years, with several years of part-time freelancing before this, and three straight years of freelancing in the middle of this short career. I work mostly with PHP and the Drupal framework. By and large, I focus on programming custom pieces of functionality; these, of course, vary greatly from project to project. I've got years of solid experience with OOP (have done some Java & C# years ago, too) including intensive experience with front-end development, and even some design work. I've lead small teams (2-4 people) of developers. And of course, given the large amount of freelancing, I've got decent project- & client-management skills. My problem is staying motivated at any place of employment. In the time mentioned I've worked (full-time) at six local companies. The longest I've stayed at any company was just over a year. I find that I'll get hired and be very excited and motivated for the first few months, but the work quickly gets "stale." By that I mean that the interesting components (ie. the programming) get done, and the rest of the work turns into boring cleanup (move a button, add text, change colours, add a field). I don't get challenged, and I don't feel like I'm learning anything new. This happens repeatedly time and time again, and I always end up leaving for either a new opportunity, or to freelance. I'm wondering if perhaps I've painted myself into a corner with the rather niche work market (although with very high demand and good compensation) and need to explore other career choices. Another possibility is that I may be choosing the wrong places of employment, mostly small agencies, and need to look into working for a larger, more established firm. I find programming, writing code, and architecting solutions very rewarding. When I'm working on an interesting problem I lose all sense of time and 14-16 hours can fly by like minutes. I get the same exciting feeling when I'm doing high-level planning of a complex system, breaking up the work and figuring out how everything will tie-in together. I absolutely hate doing small, "stupid" changes that pose no challenge, yet seem to make up more and more of my work. I want to find a workplace where I will get to work on such tasks, be challenged, and improve in all areas of product development. This maybe a programming job, management, architecture of desktop apps, or may be managing a taco stand on a beach in Mexico - I don't know, and I need some advice and real-world feedback. What are some job areas worth exploring? The requirements are fairly simple: working with computers interacting with others challenging decent pay (I'm making just short of 90k / year with a month of vacation & some benefits, and would like to stay in this range, but am willing to take a temporary cut in pay for a more interesting position) Any advice would be much appreciated!

  Read the article

• Why my register form don't accept spry validation in dw? [migrated]

  - by shaghayeh

  Why my register form don't accept spry validation in dw? Here is my code: <?php if(isset($_POST['go_register'])) { $last_login=jdate('Y/n/j ,H:i:s'); $firstname=trim($_POST['firstname']); $lastname=trim($_POST['lastname']); $email=trim($_POST['username']); $password=sha1($_POST['password']); $register_date=$_POST['register_date']; if(!empty($firstname)&& !empty($lastname)&& !empty($email)&& !empty($password)&& !empty($register_date)){ $reg_query="insert into users(firstname,lastname,email,password,register_date,last_login)values('$firstname','$lastname','$email','$password','$register_date','$last_login')"; $reg_result=mysqli_query($connection,$reg_query); if($reg_result){ echo "ok"; } }//end of not empty }//end of isset ?> <div class="sectionclass"> <script src="../SpryAssets/SpryValidationTextField.js" type="text/javascript"></script> <link href="../SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css"> <h2>??? ??? ???</h2> <form method="post" action="<?php echo $_SERVER['PHP_SELF']."?catid=2"; ?>"> <div> <span style="color:#F00">*</span> <label>??? </label> <span id="sprytextfield1"> <input type="text" name="firstname" /> <span class="textfieldRequiredMsg">A value is required.</span></span></div> <div> <span style="color:#F00">*</span> <label>??? ????????</label><input type="text" name="lastname" /> </div> <div> <span style="color:#F00">*</span> <label>??? ??????(?????)</label><input dir="ltr" type="text" name="username" /> </div> <div> <span style="color:#F00">*</span> <label>??? ????</label><input type="password" name="password" /> </div> <input type="hidden" name="register_date" value="<?php echo jdate('Y/n/j'); ?>"> <div> <input type="submit" name="go_register" value="??? ???"/> </div> </form> </div> <script type="text/javascript"> var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1"); </script>

  Read the article

• ??????????????????

  - by kazun

  2012 ? 8 ? 9 ???????????? ?? 13F ??????????????????????? DB ???????????????????????????????????????????????????????·????????????·??????????Exadata ?????????? Hybrid Columnar Compression(HCC)?????????????????????????????? (1)?????????????????IT????????????? ?????????????·??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????IT???????????????????ZFS Storage Appliances ????????100Petabytes ??(8 ? 9 ???)? ZFS Storage ?????????????????????????????????????????????????????????????????????? (2)????????????????????????????? ??????????? VTR ???????????????????? EOL(End of Life)????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????7 ??????????? StorageTek SL150 ??????????????????????????450TB(????)?30~300 ????????????????????????? 10.1TB?????????????????????????????????????????????????????????????????????????????? ??:StorageTek SL150(????????????) ?????????????????????????????????????????????????????????? (3)Oracle????????????????????????? ??????(????????)????????????????????????????????????????????????Sun ZFS Storage Appliance?????????????????????????????Sun ZFS Storage Appliance ?Pillar Axiom ???????????????????????????? ?????????Oracle Database?????????????????????????????????????????? Database ????????? Hybrid Columnar Compression / Snapshot?Clone????????????????DB???????? I/O Quality of Services?????????DB??? ????? ???Optimized Solutions????Oracle??????(??????????????????)????????????????????????????????Exadata ?? InfiniBand ?????????????????1?????? ??????????????????????????????????????????????Oracle Database ? Exadata ?????????????????????????? Oracle ?????????????????????? Sun ZFS Storage 7120 Appliance ??????????????????????? ??:Sun ZFS Storage 7120 Appliance (4)?????????Oracle Database ??????????????? “Hybrid Columnar Compression (HCC) ” ????????????? HCC??????????????????????????????????????????????????? I/O ????????????????????????????????????????????Oracle Database ???? HCC ??????????????? ?????:?Oracle ????·???? 2009?12? Exadata Hybrid Columnar Compression? ?????????Sun ZFS Storage Appliance ?Pillar Axiom ?????????4??????HCC??????????????????? HCC ???????? HCC ???????? Exadata ? DataGuard ?????HCC ?????????????????????? Exadata ??????????????·??????????????? DB ??????? HCC ?????? ?????????????????????????HCC ?????????????????????????????????? ?????????? HCC ?????????????????????ZFS Storage Appliance ? Pillar Axiom ?????????????????????? 6 ?????????????????????????????????????? ¦???????? ???????????

  Read the article

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >