Search Results

Search found 13437 results on 538 pages for 'trusted root certificates'.

Page 434/538 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

  • OpenVPN bad source address from client

    - by Bogdan
    I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

    Read the article

  • BIND9 DNS Problems - Not resolving

    - by clone1018
    I host a BIND9 DNS server for my VirtualMin users to use. And It only resolves for 75% of the people. It has been WELL over 1 week now. Here is a sample. $ttl 38400 @ IN SOA axxim.net. root.axxim.net. ( 1274031391 10800 3600 604800 38400 ) @ IN NS axxim.net. day7tech.com. IN A 96.226.216.37 www.day7tech.com. IN A 96.226.216.37 ftp.day7tech.com. IN A 96.226.216.37 m.day7tech.com. IN A 96.226.216.37 localhost.day7tech.com. IN A 127.0.0.1 webmail.day7tech.com. IN A 96.226.216.37 admin.day7tech.com. IN A 96.226.216.37 mail.day7tech.com. IN A 96.226.216.37 day7tech.com. IN MX 5 mail.day7tech.com.

    Read the article

  • Setting SVN permissions with Dav SVN Authz

    - by Ken
    There seems to be a path inheritance issue which is boggling me over access restrictions. For instance, if I grant rw access one group/user, and wish to restrict it some /../../secret to none, it promptly spits in my face. Here is an example of what I'm trying to achieve in dav_svn.authz [groups] grp_W = a, b, c, g grp_X = a, d, f, e grp_Y = a, e, [/] * = @grp_Y = rw [somerepo1:/projectPot] @grp_W = rw [somerepo2:/projectKettle] @grp_X = rw What is expected: grp_Y has rw access to all repositories, while grp_W and grp_X only have access to their respective repositories. What occurs: grp_Y has access to all repositories, while grp_W and grp_X have access to nothing If I flip the access ordering where I give everyone access and restrict it in each repository, it promply ignores the invalidation rule (stripping of rights) and gives everyone the access granted at the root level. Forgoing groups, it performs the same with user specific provisions; even fully defined such as: [/] a = rw b = c = d = e = f = g = rw [somerepo1:/projectPot] a = rw b = rw c = rw d = e = rw f = g = rw [somerepo2:/projectKettle] a = rw b c d = rw e = rw f = rw g Which yields the exact same result. According to the documentation I'm following all protocols so this is insane. Running on Apache2 with dav_svn

    Read the article

  • Windows Server 2008 R2 RAS VPN: access server on internal interface ip

    - by Mathias
    Hey, short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

    Read the article

  • ntpd on Fedora Core 6 with high negative time reset values

    - by Mark White
    The basic problem is we have a FC6 server instance running on a virtual machine, and the system time seems to have been slowly varying until it is now causing a problem. The server runs 24/7 and has been up for 155 days. It has been changed to show GMT, and reports the time as (example) 00:15:15 GMT whereas the actual time is 00:00:00 GMT. This is an offset of 915 seconds. selinux has been changed to 'setenforce 0' for testing and I am running as root. I stop the ntpd service and change the time in System|Administration|Date & Time. The time still shows the same with 'date' in bash. There are no error logs. I change the date with 'date --set' in bash. The response confirms the changed date. I run 'date' and the incorrect date is shown. There are no error logs. I start the ntpd service and /var/log/messages shows success with 'time reset -915.720139s'. The date remains unchanged. ntpq -p shows three three time servers all have offsets of around -915 seconds. I stop ntpd service and try 'ntpd -gqx' and get the same result as above - success, but a large negative time reset. I've tried varying combinations of the above, and a few more settings in System|Administration|Date & Time - no change. I just need to reset the system time to GMT. No offset. But I can't wait for ntpd to slew the time over the next few weeks. Any advice is welcome, cheers! Surely this shouldn't be this difficult... Mark...

    Read the article

  • Windows Server 2008 R2 RAS VPN: access server on internal interface ip

    - by Mathias
    short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

    Read the article

  • Dell PERC 5 - RAID-10 keeps rebuilding drive 2 every day

    - by raid question
    I have a Dell PowerEdge 2950 with this card: RAID bus controller [0104]: Dell PowerEdge Expandable RAID controller 5 [1028:0015] and six disks in a RAID-10. I replaced drive 2, because it didn't show up, and then it started to rebuild itself: root@backup01:~# megaraidsas-status -- Arrays informations -- -- ID | Type | Size | Status a0d0 | RAID 10 | 5587GiB | DEGRADED -- Disks informations -- ID | Model | Status | Warnings a0e8s0 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s1 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5394 a0e8s2 | ATA ST2000DM001-1E61 1863GiB | rebuild | errs: media:0 other:99 a0e8s3 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s4 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s5 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 The rebuild finishes, then the virtual drive becomes optimal, and drive 2 goes online. Then once a day, drive 2 acts like it's been removed, and the rebuild starts all over again. How do I make this once a day rebuild stop? Event Description: Removed: PD 02(e1/s2) Event Description: Removed: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: State change on VD 00/0 from OPTIMAL(3) to DEGRADED(2) Event Description: VD 00/0 is now DEGRADED1 Event Description: State change on PD 02(e1/s2) from ONLINE(18) to FAILED(11) Event Description: State change on PD 02(e1/s2) from FAILED(11) to UNCONFIGURED_BAD(1) Event Description: Background Initialization failed on VD 00/0 Event Description: Inserted: PD 02(e1/s2) Event Description: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: PD 02(e1/s2) is not a certified drive Event Description: State change on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from UNCONFIGURED_GOOD(0) to OFFLINE(10) from UNCONFIGURED_BAD(1) to UNCONFIGURED_GOOD(0) Event Description: Rebuild automatically started on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from OFFLINE(10) to REBUILD(14)

    Read the article

  • ubuntu - Best way of repartitioning a (running) production server

    - by egarcia
    I've got an (externally hosted) production server running Ubuntu LTS. It serves webpages (rails) and has an svn repository accesible through Apache, and a PostgreSQL db. I've got ssh access to the server and root privileges. Most of the "interesting" stuff is located in /var/ : svn repositories are inside /var/svn, web pages under /var/www, etc. Yesterday I was curious about how much disk space had it left, so I did the following: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/md1 950M 402M 500M 45% / varrun 990M 64K 990M 1% /var/run varlock 990M 0 990M 0% /var/lock udev 990M 76K 989M 1% /dev devshm 990M 0 990M 0% /dev/shm /dev/md5 4.7G 668M 4.1G 15% /usr /dev/md6 4.7G 1.4G 3.4G 29% /var /dev/md7 221G 28M 221G 1% /home none 990M 4.0K 990M 1% /tmp My 'var' partition, which holds most of the interesting part, is only 4.7G big. The /home/ partition, on the other hand, is 221G, but it is mostly unused. I should have checked the disk layout before starting installing stuff. Ideally I would need /var/ and /home/ to be "switched" - /home/ should be the one with 4.7G, and /var/ the one with 221G. Is there a way to solve this without having to reinstall the whole thing?

    Read the article

  • Suggestions for Windows 8 migration [closed]

    - by Big Endian
    I'm thinking of migrating to Windows 8. At first I hated it, but I'm pretty sure the Windows 8 model is the future, and I don't particularly want to end up hating the future like my parents, frustrated and bewildered by anything past Windows XP. I'm currently running Windows 7 and my system has been accumulating some problems. It's probably an accumulation of issues from installing too much software, changing firewall settings, installing Ubuntu alongside Windows, and... well I'm not sure, but my computer has been buggy in unexpected ways lately (freezing and unfreezing, display driver crashing and recovering, and what I call "deep freeze/thaw cycle" where the mouse won't even move for a while). I'm good at solving computer problems, but I can't seem to get to the root of these and my best idea for fixing them is making sure I've backed up every file then re-installing the entire OS. Luckily for me, a new OS is just around the corner so this would be a good time to get two things out of the way at once. The problem I see is that the upgrade options I see are all "seamless". I don't want a seamless upgrade. I want to wipe the slate clean and start all over. Does this mean I will have to buy a full, new copy of Windows 8 rather than one of the cheaper upgrading options? Or does it not make since for me to go to Windows 8 given that I have a laptop, not a tablet? Maybe I should just re-install Windows 7, or even call good enough good enough, try to eliminate the bugs, and start with a fresh slate in 2-3 years after this computer eventually dies entirely from (inevitable) hardware failure. What would be the advantages or disadvantages and costs of each option, how would I go about upgrading to Windows 8 if that's the option I choose, and what is your personal opinion about my situation?

    Read the article

  • Dash (-) in directory listing

    - by Mazzy
    I've Googled around for this to no avail, I'm sure its just something simple but I have not been able to figure this out perhaps because searching in Google or SF for a "-" can be problematic. I had a strange directory listing show up the other day in my git repository within Drupal. Listing my sites directory looks like this: -sh-4.1$ ls -al total 52 drwxr-xr-x 5 (hide) (hide) 4096 Dec 6 16:15 . drwxr-xr-x 24 (hide) (hide) 4096 Dec 11 16:22 .. -rw-rw-r-- 1 (hide) (hide) 24271 Dec 6 15:57 – drwxrwxr-x 4 (hide) (hide) 4096 Sep 17 11:53 all drwxr-xr-x 3 (hide) (hide) 4096 Sep 17 11:54 default drwxrwxr-x 8 (hide) (hide) 4096 Dec 11 17:40 .git -rw-rw-r-- 1 (hide) (hide) 476 Sep 17 11:53 .gitignore -rw-rw-r-- 1 (hide) (hide) 81 Sep 17 11:53 README.md This "-" file cannot be opened and does not appear to be a symlink, although when I execute "cd -" I get this: -sh-4.1$ cd - /home/sites/dev1.(hide).com That is coincidentally or not the users home directory, and the site's root directory. The other strange this is this entry does not show up for any other user browsing this same directory. Nor does it show up for other users period in their Git directories. The entry cannot be removed via RM. Running Centos 6.2 by the way...

    Read the article

  • Xvnc4 started from xinetd only displays empty gray X screen

    - by scott8035
    I'm attempting to setup an Ubuntu 10.10 box so that anyone can connect to port 5900 and be greeted by the gdm login manager. To do so, I added a vnc entry in /etc/services and I am starting Xvnc4 using this xinetd config file: service vnc { protocol = tcp socket_type = stream wait = no user = nobody server = /usr/bin/Xvnc server_args = -geometry 1000x700 -depth 24 -broadcast -inetd -once -securitytypes None } This kind of works...I can start multiple sessions all to port 5900, and I get an X screen. The problem is that I only get an empty, gray X screen with no applications started. I know when you run vncserver from the command line it will look to your ~/.vnc/ directory for your passwd and xstartup files, and I think what I want to do is put "gnome-session" into the xstart file. However, which xstartup file? The running user is "nobody" who obviously doesn't have a ~/.vnc/ directory. I tried a /root/.vnc/xstartup file and a ~scott/.vnc/xstartup file and it doesn't look like they were even read. I changed the xinetd vnc service so that it would "strace" Xvnc4. I looked thru all the "open" lines and didn't get a clue as to what file it was trying to read for xstart. Can anyone help? I just want a terminal server where the user is presented with a gdm login screen.

    Read the article

  • Ubuntu 13.04 to 13.10: Filesystem check or mount failed [migrated]

    - by SamHuckaby
    I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

    Read the article

  • Cannot start MySQL

    - by Mohamed Nour El-Din
    I used this command from shell to repair all Databases mysqlcheck -u root -p --auto-repair --check --optimize --all-databases and after that I restarted the server when it came back alive again I tried to open my vBulletin forum but I recived Database error message. and also tried to open phpMyAdmin but I received this error : #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured). I checked the services list and found that the MySQL Service is not listed, so I tried to start it from shell I receive this error : Starting MySQL.Manager of pid-file quit without updating fi[FAILED] could anyone help me in that ? thanks in advance. update I found these lines in the log file 101101 01:36:01 mysqld started 101101 1:36:01 [Warning] Asked for 196608 thread stack, but got 126976 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] Fatal error: Can't open and lock privilege tables: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 01:36:01 mysqld ended What should I do then ?

    Read the article

  • Nvidia Linux Driver Huge Resolution

    - by darxsys
    I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

    Read the article

  • Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

    - by user48848
    I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

    Read the article

  • setting up subdomain wildcard: configured A record, VirtualHost... still does not work

    - by user80314
    Running Apache on CentOS, trying to setup wildcard subdomains, basically I want .mydomain.com to point to mydomain.com With cPanel I added *.mydomain.com With WHM I made sure that A record is pointing to the right IP. I set my A record: * 14400 IN X.x.x.x My httpd.conf: ServerName _wildcard_.mydomain.com ServerAlias *.mydomain.com DocumentRoot /home/mydomain/public_html ServerAdmin [email protected] UseCanonicalName Off ## User userdomain# Needed for Cpanel::ApacheConf UserDir enabled userdomain <IfModule mod_suphp.c> suPHP_UserGroup userdomain userdomain </IfModule> <IfModule !mod_disable_suexec.c> <IfModule !mod_ruid2.c> SuexecUserGroup usergrdomain userdomain </IfModule> </IfModule> <IfModule mod_ruid2.c> RUidGid userdomain userdomain </IfModule> ScriptAlias /cgi-bin/ /home/mydomain/public_html/cgi-bin/ # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/std/2/mydomain/wildcard_safe.mydomain.com/*.conf" I have my VirtualHost in httpd.conf set to point to domain root. Restarted Apache, server, dns, still nothing. I have spent hours researching this, followed instructions, set everything correctly. What am I missing?

    Read the article

  • I accidentally hijacked my localhost

    - by Zach L
    Opening localhost in the browser is pointing a local webpage (examplePage) after playing with some config files a while back, and I can't figure out how to restore the default behavior. Background: I have XAMPP installed on my Windows 7 machine, and a webpage at c:/xampp/htdocs/examplePage. A couple weeks ago, I was on a mission to get sites root-relative urls (/resource) to work, so I played around with a bunch of apache/conf files, including httpd.conf and httpd-vhosts.conf and also was messing with the Windows hosts file. I gave up at some point, didn't document exactly what I did, and have since probably forgotten some of what I did. Many of my changes stemmed from suggestions in this StackOverflow post What I've Tried I commented out my additions to the hosts file I turned off XAMPP (thus hopefully negating any apache config file effect) I reverted to my original DocumentRoot in httpd.conf anyway (xampp/htdocs) localhost still displays examplePage. Even with xampp turned on (my reverted DocmentRootisn't taking effect) Does anyone know what I may have done and how I can fix it? Update : Its been resolved, thank everyone so much in taskmanager, theres a couple instances of httpd.exe (Apache HTTP Server). I ended these, and opened XAMPP, restarting apache. all references to examplePage in my .conf files that I could find had been commented out or removed. I imagine that the old versions were still in effect for some reason, and manually ending the Apache processes fixed this. As a point of interest, Its still a mystery why those processes were running - I cannot reproduce that situation. I must've stumbled upon a XAMPP bug of some sort.

    Read the article

  • Nginx multiple upstream servers on the same domain via diferent url

    - by Barry
    Hello. I am trying to rout trafic to different upstream servers (that serve different applications and not for load balancing). The incoming trafic has the same domain name but different URL. Here is an example of my configuration: http { upstream backend1 { server 127.0.0.1:8080 fail_timeout=0; server 127.0.0.1:8081 fail_timeout=0; } upstream backend2 { server 127.0.0.1:8090 fail_timeout=0; server 127.0.0.1:8091 fail_timeout=0; } server { listen 80; server_name my_server.com; root /home/my_server; location /serve_me { fastcgi_pass backend1; include fastcgi_params; } location / { fastcgi_pass backend2; include fastcgi_params; } } } It seems that whatever trafic comes in (including "my_server.com/serve_me") goes to backend2. How do I make queries that start with /serve_me to be directed to backend1? Thanks, Barry.

    Read the article

  • OpenBSD logins via SSH seem to be ignoring my configured radius server

    - by Steve Kemp
    I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

    Read the article

  • Deploying concrete5 on nginx

    - by Nithin
    I have a concrete5 site that works 'out of the box' in apache server. However I am having a lot of trouble running it in nginx. The following is the nginx configuration i am using: server { root /home/test/public; index index.php; access_log /home/test/logs/access.log; error_log /home/test/logs/error.log; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ index.php; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } # pass the PHP scripts to FastCGI server listening on unix socket # location ~ \.php($|/) { fastcgi_pass unix:/tmp/phpfpm.sock; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; include fastcgi_params; } location ~ /\.ht { deny all; } } I am able to get the homepage but am having problem with the inner pages. The inner pages display an "Access denied". Possibly the rewrite is not working, in effect I think its querying and trying to execute php files directly instead of going through the concrete dispatcher. I am totally lost here. Thank you for your help, in advance.

    Read the article

  • Ubuntu: unattended-upgrades from a local package archive

    - by Novelocrat
    I have a local apt archive with a bunch of packages I built in it. The Packages and Release file are generated by apt-ftparchive. The Release file looks like Date: Thu, 06 May 2010 23:04:33 UTC Label: PPL Origin: PPL Suite: ppl MD5Sum: ebec3527ebc8351468b2ef8796c19855 37325 Packages d41d8cd98f00b204e9800998ecf8427e 0 Release SHA1: a0593b663d77fde88ee35b56ae1f3c17801cfe99 37325 Packages da39a3ee5e6b4b0d3255bfef95601890afd80709 0 Release SHA256: dd73a02846aee111cac58a869c6bf650886632ba82c2172ffddd81aa4429981c 37325 Packages e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 0 Release I'm using unattended-upgrades to keep the machines in the lab up to date on security and bug fixes, but I'm finding that it doesn't pull from my local archive. The configuration file for it looks like // Automaticall upgrade packages from these (origin, archive) pairs Unattended-Upgrade::Allowed-Origins { "Ubuntu hardy-security"; "Ubuntu hardy-updates"; "PPL ppl"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { // "vim"; // "libc6"; // "libc6-dev"; // "libc6-i686"; }; // Send email to this address for problems or packages upgrades // If empty or unset then no email is sent, make sure that you // have a working mail setup on your system. The package 'mailx' // must be installed or anything that provides /usr/bin/mail. //Unattended-Upgrade::Mail "root@localhost"; Yet, when I run sudo unattended-upgrade on one of these machines, newer package versions don't get installed. Can anyone point out what I'm getting wrong?

    Read the article

  • debian VM refusing all traffic apart from http

    - by james lewis
    I've got a VM with a fresh install of Debian (wheezy) and I've installed node and mongo on it. The VM is using a bridged network connection so I was expecting to be able to point my host machines browser at the ip address of the Debian VM (port 1337 for my node example or port 28017 for my mongo status page) and see one of the two services (node or mongo). My requests are refused though. As far as I can tell Debian allows all traffic by default and you have to manually configure iptables to drop traffic. I've checked iptables and it says it's setup to allow anything through. It looks like this: root@devbox:/home/jlewis# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination As a test I setup nginx and I was able to get to the nginx landing page from my host no problems so obviously http traffic is allowed. I then set nginx up to forward all traffic upstream to mongo - no problems there, I was able to see the status page. I then did the same for my example node server and again, no problems. So http traffic is fine, but all other traffic is blocked. Anyone know why debian might be refusing all other traffic other than iptables being setup to drop it? EDIT - output from netstat -nltp: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:28017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:51028 0.0.0.0:* LISTEN 1541/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2462/sshd tcp 0 0 127.0.0.1:1337 0.0.0.0:* LISTEN 2794/node tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2274/exim4 tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1510/rpcbind tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2189/nginx tcp6 0 0 :::22 :::* LISTEN 2462/sshd tcp6 0 0 :::45335 :::* LISTEN 1541/rpc.statd tcp6 0 0 ::1:25 :::* LISTEN 2274/exim4 tcp6 0 0 :::111 :::* LISTEN 1510/rpcbind

    Read the article

  • pgpoolAdmin keeps going straight back to it's login page

    - by user705142
    I'm trying to run pgpoolAdmin through nginx - it seems to be working properly, at least initially. I've gone through the initial set-up, which works fine, but now after logging in every link takes me straight back to the login page. It also shows japanese text instead of english, despite picking english in the installation. It seems to me just as if it was unable to save any user data, session information etc. I have javascript/cookies enabled, so it's not that. The ownership of the folder is nginx, and so too is pgmgt.conf.php, so it shouldn't be a problem with permissions. One potential issue is that I can't seem to see any confirmation that php postgresql support is enabled in the php info screen, despite the correct package installed and in the config line. Any ideas as to what's happening here? The nginx rules are pretty standard: server { # pg-pool admin listen 997; server_name localhost; root /opt/pgpooladmin; index index.php; location ~ .php$ { fastcgi_pass_header Set-Cookie; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; include fastcgi_params; } }

    Read the article

  • Error in Apache: /var/run/apache2 not found

    - by Julen
    This is more self-answered question but since it drove me crazy I would like to share with the community and maybe someone can tell me why it happened or what it caused. The thing is I wanted to install in my Ubuntu 10.4 machine a CGI app, one built in the samples that come with the gSOAP toolkit. My intention was to access those from ASP .NET machine. Regular Ubuntu does not come with Apache so I install it from Sypnatic. Pretty easy. I followed this How to Install Apache2 webserver with PHP,CGI and Perl Support in Ubuntu Server. Instead of apache.conf I tweaked httpd.conf since a college here used that file instead of the first to put his Apache running. Besides I was able to access his CGI from my ASP .NET but mysteriously I could not from mine, I was getting always "The request failed with HTTP status 503: Service Temporarily Unavailable". Checking Apache error.log I found these messages: No such file or directory: unable to connect to cgi daemon after multiple tries: /home/julen/htdocs/cgi-bin/calcserver And looking more carefully whenever I restarted Apache I got this other message No such file or directory: Couldn't bind unix domain socket /var/run/apache2/cgisock. cgid daemon failed to initialize I am pretty new with Ubuntu and I could not think that Apache and Synaptic made a mistake in the installation process of the server, but it is true that the /var/run/apache2 was missing whereas in my college's computer was not. I tried to find and "elegant" solution but I found a post from 2006 that had an slight reference to it. Finally I decided to create the folder myself (as root) and then everything worked fine. Hope this helps others if they encounter a similar problem. Still I have the doubt why the folders was not created in the first place. Best, Julen.

    Read the article

  • Limiting access in Silverlight\Pivotviewer

    - by sparaflAsh
    I'm going to deploy a pivotviewer application. As some of you might know this silverlight application load a .cxml index file for a group of images. My need is to make .cxml file and image files not accessible for the user. Now, if I don't have a need I usually code like this in C# and the file is hosted in the documentroot: _cxml = new CxmlCollectionSource(new Uri("http://www.myurl.it/Collection.cxml", UriKind.Absolute)); This means that my cxml and then the images are available by http for everyone who knows the URI. I'm a newbie to server configuration, so any help/hint would be deeply appreciated. Someone suggested me to take the files out of the root, but it seems like I can't go to pick them up if they are not a URL in Silverlight. At least I didn't managed to understand how. Someone else suggested me to play with web.config file to hide URLs, but I don't really know where to start. My question is, what's the best practice to hide my stuff? Obviously I can edit the question if you need more details.

    Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >