Search Results

Search found 15966 results on 639 pages for 'connection'.

Page 435/639 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• SSL 3.0 warning in Chrome on Ubuntu 10.04LTS

  - by Leopd

  I'm running Apache2 with SSL on Ubuntu 10.04LTS. Chrome gives me this annoying warning when I inspect the certificate: The connection had to be retried using SSL 3.0. This typically means that the server is using very old software and may have other security issues. The relevant part of the apache config looks like: SSLEngine on SSLCertificateFile /etc/ssl/... SSLCertificateKeyFile /etc/ssl/... SSLCACertificateFile /etc/ssl/... SSLProtocol -all +SSLv3 +TLSv1 The last line I added to try to address this problem, but it's not working. Any advice on properly enabling TLS?

  Read the article

• Disable ALTQ for internal network traffic

  - by javanix

  I currently have a FreeBSD 8.2 media server set up on my LAN that I use to stream my music from. I also have an SSH login that I use to do file transfers to and from this server remotely. I would like to set up ALTQ (and have gotten this working) to limit my outgoing bandwidth from the server for SSH traffic. However, configuring ALTQ this way is also limiting my internal traffic (and thus interfering with my music streaming) since I am only using a single network interface. Can anyone show me how I would use PF and ALTQ to limit outgoing WAN traffic while allowing all internal LAN traffic to go through unhindered? ext_if="eth0" int_if="eth0" altq on eth0 cbq bandwidth 1Mb queue { std, ssh } queue std bandwidth 80% cbq(default) queue ssh bandwidth 20% cbq(ecn) pass out on eth0 proto tcp to port 22 queue ssh eth0 is my LAN interface, my total WAN bandwidth on my cable connection is 1Mb/s, and my internal network is 10/100.

  Read the article

• Unable to connect with PPTP (From Windows 8 to Ubuntu 12.10)

  - by jaja

  I'm trying to connect using PPTP to my VPS. At first, I got the problem that my connection (Wlan, which is what I use to connect to the Internet) goes "limited" (I can't connect to the Internet) when I connect to the VPN. Then, I used to get some long message, something like you might be trying using L2TP. Then now it's back again to the "limited" problem. What's the solution to that problem? One thing I'm not sure of is what I put as my local IP address in "sudo nano /etc/pptpd.conf" Is it 127.0.0.1? I'm following this tutorial: http://thesinclairs.gotdns.com/blog/set-up-a-pptp-vpn-on-ubuntu-server/

  Read the article

• AWS:EC2:: Could not connect FTP client?

  - by heathub

  My Server OS: Amazon Linux I am trying to set up ftp. I have: Installed vsftpd open port 20-21 open port 1024 - 1048 Basically, I followed every of these steps Start vsftpd service (the status indicate [ok]) I use filezilla for my ftp client. Here is my setting/configuration: Host: ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Port: -(blank, but I have tried 20 and 21 though) Server Type: FTP - File Transder Protocol Logon Type: Normal Username: (tried root and ec2-user) Transfer mode: Tried passive and active I always has this error: Status: Waiting to retry... Status: Resolving address of ec2-XX-XX-XXX-XX.compute-1.amazonaws.com Status: Connecting to XX.XX.XXX.XX:21... Error: Connection timed out Error: Could not connect to server Have I missed any configuration/settings? EDIT After execute the /sbin/iptables -L -n Here is the result: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Diagnose cause of long running requests in IIS 7.0

  - by Shlomi Fruchter

  We are running an ASP.NET web application on IIS 7.0, Windows Server 2008 R2, with SQL Server 2008 R2 for DB. On weekends, when the traffic is high, the request queue length in the IIS servers increase (up to 800 requests) and then drops, every minute or so. I can see that the servers are handling some requests which, according to the 'Current Requests' view in IIS Manager, are long running (thier Time Elapsed value ranges from 20 to 50 seconds). Those requests are not necessarily heavy queries, actually, I can't understand why they are taking so long. Can it be because the client is closing the connection on his side? Thanks, Shlomi

  Read the article

• 12.10 Wireless networking

  - by user108594

  I downloaded ubuntu 12.10 using WUBI and cannot connect to the internet. I removed it and downloaded ubuntu 12.04 still cannot connect. This I assume rules out the program being the problem. I reinstalled 12.10. When loaded I get the same message W/red (x) stating Internet not connected. I went to the Settings drop down box and it does not reveal the network list but (enable networking has a ck mark). Am running a HP Laptop with a w/7/64 OS that has a kill switch that indicates (orangeno connection) I downloaded 12.10 on my desktop (on the same network) and everything OK. I tried to follow the instructions in the help menu but got lost and confused . Sincerely Dan Additional Info per request Broadcom 802.11b/g Wlan Internal pc [hp laptop] P.S. I've been out of town for about a month. TKS for your gitback I did install 12.10 via cd and everything ok,but retried alongside 7 and unable to connect to internet,also took laptop and hard wired using ethernet cable and everything ok. stumped again and running out of ideas!!!

  Read the article

• Haproxy Slow Reload in DB Mode

  - by com

  Recently I started using great tool for load balancing - Haproxy. There is only one disturbing thing that I cannot figure out how to deal with it. We use haproxy for load balancing mysql traffic. When there is a lot of traffic and many connection it takes ages for haproxy to reload (~ 30 min), with less traffic it doest reload within 1 min. I do reload with: service haproxy reload Of course if I need to do an urgent change in configuration I expect haproxy to do reload very fast. Killing haproxy instances waiting for disconnection causes to disconnection of msyql connections. It looks like that I made mistake in settings of haproxy or in settings of application. If you know how to solve this please help me. Thanks!

  Read the article

• How to set up Pegasus Mail in non-admin account?

  - by thursdaysgeek

  I'm using Pegasus Mail for my mail client, and on my old computer (XP Pro), I could log in as the guest or admin account and it would still work. I recently got a new computer, with XP Pro, and I've set the mail client to work fine when I log in to the admin account, but when I log into the guest account, it always wants the SMTP, POP, and other connection information. How do I get it to remember that? I tried making an admin account, setting it up, and then downgrading that account, but that didn't work either. Does anyone even use PMail?

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

• Tracking my home IP from anywhere on the internet?

  - by oKtosiTe

  I have an ISP that serves semi-permanent IPv4 addresses. They can't promise fixed IP addresses, but unexpected changes are quite rare. This begs me to ask however: what would be the easiest/most reliable way to track my home IP address so I can access my (Windows 7) home server even in the case of an address change? Please note: for reasons that I don't want to go in to, I'd like to avoid using any "dynamic DNS" type services. Instead I'd prefer some way to perhaps have the home server leave an occasional/triggered "address stamp" on a remote, off-site server (by SSH, HTTP post or similar, preferably over an encrypted connection).

  Read the article

• Want shortcut to OpenVPN GUI connect in Windows 7 (without going through the system tray)

  - by Leo Alekseyev

  I am running OpenVPN with OpenVPN GUI under Windows 7 x64. Currently, to connect I need to right-click the OpenVPN icon in the system tray and select "connect", which brings up the password prompt. What I want: some sort of a batch file or a shortcut that can be invoked to initiate OpenVPN connection. Motivation: I prefer running my system keyboard driven; I usually hide my taskbar and don't like needlessly fishing in the system tray. Currently, OpenVPN is the only program that forces me to interact with the taskbar. Surely there is an alternative approach, possibly invoking some command line trickery and/or autohotkey, but so far I haven't been able to find it.

  Read the article

• Just installed 13.10 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.10 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• ubuntu 12.10 Lenovo b570e, WiFi connected but not working

  - by koogee

  I'm running ubuntu 12.10 liveUSB on a lenovo b570e. It has an atheros wifi card that connects with my home network but I can't browse AT ALL. My network is multiple clients --> router --> isp modem --> Internet I can ping my router (192.168.0.1) but not my isp's modem(192.168.15.1). I have 3 other computers connected to the same router that are working fine (infact i'm posting from one) ping -c 3 google.com unknown host google.com ping -c 3 8.8.8.8 shows 100% packet loss I think its some networking issue. I tried directly connecting it to the router via ethernet cable but same issue. It gets an ip, shows LAN connected but can't browse. If I connect it directly to the isp modem via ethernet cable it starts working fine. Connection Information shows: Interface: 802.11 wifi (wlan0) driver: ath9k security: wpa/wpa2 speed: 150mb/s ip: 192.168.0.106 broadcast: 192.168.0.255 subnet:255.255.255.0 default route: 192.168.0.1 primary dns: 192.168.15.1 i have restarted the router and modem many times. Rebooted the LiveUSB many times.

  Read the article

• Bluetooth connectivity

  - by Viniketa

  computer: Samsung All in One PC OS: Windows 7 (up-to-date) BT Radio: Broadcom I have Bluetooth speakers I have successfully used with the system in the past. In fact, I had them set as default speakers so audio would transfer when I turned them on. No longer. Now, they show as 'disconnected'. Asking for connection gives no response. Option to set as default is greyed out. Bluetooth view utility gives an error of 10049 when I try to connect (supposedly, the means an invalid device address). I uninstalled the device and re-installed. No help. Any advice? Thanks in advance.

  Read the article

• WebDAV mapped drive asking for username and password

  - by confus3d

  Since we migrated domains we're having problems with mapping a drive using a WebDAV connection in our login script. It's a simple net use x: \\server.domain.com\folder Which used to authenticate automatically (all we needed to do to make this happen was to put the server in the intranet zone in the internet explorer settings). Since the domain migration though, nearly everyone is being prompted for a username and password to connect. Does anyone have any idea how to fix this? Any help much appreciated. The webdav share is on a Windows 2003 server running IIS.

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• XP SP3 PRO - Delayed write failed $mft- can I get which particular file caused the problem ?

  - by user35020

  Hi - I sometimes get that error when resuming from hibernation : Delayed Write Failed : Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, a usb external drive) which was plugged in when I hibernated was not read at the right moment - or sometimes I simply forgot to plug it when resuming from hibernation. My question is : is there any way to see which particular file/folder/folder status/don't know what failed to be written ? Hard drive functions correctly before and after - no problem. Is there a detailed log someplace or a utility ? Searched and searched but nothing. Thanks for any help !

  Read the article

• TFS 2010 migration from one server to another

  - by Kabir Rao

  We have followed- http://msdn.microsoft.com/en-us/library/ms404869(v=vs.100).aspx every steps of this extremely poorly worded article. We are not able see Dashboards of SharePoint projects. In some cases(mostly scrum projects, i guess), i get "The Webpage can not be found". In other cases- Unable to refresh data for a data connection in the workbook. Try again or contact your system administrator. The following connections failed to refresh: TfsOlapReport Any help would be very much appreciated.

  Read the article

• Best Practice: Migrating Email Boxes (maildir format)

  - by GruffTech

  So here's the situation. I've got about 20,000 maildir email accounts chewing up a several hundred GB of space on our email server. Maildir by nature keeps thousands of tiny a** little files, instead of one .mbox file or the like... So i need to migrate all of these several millions of files from one server to the other, for both space and life-cycle reasons. the conventional methods i would use all work just fine. rsync is the option that comes immediately to mind, however i wanted to see if there are any other "better" options out there. Rsync not handling multi-threaded transfers in this situation sucks because it never actually gets up to speed and saturates my network connection, because of this the transfer from one server to another will take hours beyond hours, when it shouldn't really take more then one or two. I know this is highly opinionated and subjective and will therefore be marked community wiki.

  Read the article

• What are the essential considerations for setting up systems in a location with unreliable power?

  - by dunxd

  I deal with a lot of remote offices located in parts of the world where the local grid power supply is unreliable. Power can go off anytime with no warning, with outages ranging from minutes to days Power fluctuation is wild, with spikes and brown outs Currently the offices will have some or all of the following: A generator, with an inverter, or some sort of manual switch A big UPS or battery array connecting a number of devices Several smaller APC UPS with computers attached Low cost Voltage Regulators sometimes connected between mains and UPS or device. I know that each of these things needs to be appropriately rated for the equipment to which it is connected (although I am not sure how to calculate the correct rating). The offices will generally have the following equipment (in varying quantities): some sort of internet connection device (VSAT router, ADSL modem, WiMax router) Cisco ASA 5505 firewall a bunch of PCs printers one server I don't seek to replace the advice of an electrician, but in some of these locations they only answer the questions you ask them, so I need to make sure I have enough understanding of the essentials to protect equipment from damage, and possibly get through some power cuts.

  Read the article

• Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

  - by Bjørnar Kibsgaard

  I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

• Own website fails to load first time

  - by AmazingDreams

  I have a website running on a VPS, every time I first try to load the website the connection times out. If I press try again, it loads directly. I'm not sure whether this is a DNS issue or a server issue. As far as I know everything is set up correctly. Also, it has been doing this from the moment I got this server and set up my domain name. And that's about two to three months ago. You may take a look here: http://www.wegotcha.nl/ As you can see at this moment it's just an image, there are no scripts running in the background or anything. The only error Apache gives me is that favicon.ico cannot be found. It's an Apache webserver running on Ubuntu 12.04.1 (newest version) I update all packages almost every day (apt-get update && apt-get upgrade). I am merely an amateur on the area of webservers so any help will be appreciated. :)

  Read the article

• Remote desktop won't connect to Win7 Vmware Virtual machine

  - by Rodniko

  created a Virtual machine using VMware. The VM is on and i succeeded to login and work on it with the Vmware console. now i want to use the "remote desktop connection" to connect to it. i enabled the remote access on the home premium Win7 that i installed on the VM. in the Remote Desktop i entered the ip (same network (home network))). it just won't connect. i also disabled the firewall on the Win7 , but it still won;t connect. i have another VM with the same Win7 that remote desktop works fine with.

  Read the article

• How do you access usermin

  - by Lobe

  I have recently setup a web server with webmin, virtualmin and usermin on CentOS to host some websites and email, however I am unable to access usermin. I can access webmin from www.foobar.com:10000 but I can't access usermin from www.foobar.com:20000 This thread seems to have dealt within the same issue, however when I tried the command "telnet localhost 20000" it came back with a connection refused message. Any idea how to get this running. I'll let you know in advance that I am a linux newbie and this is a large learning experience, so don't rule out anything if you are thinking "oh, but he wouldn't be dumb enough to forget that" or the like

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >