Search Results

Search found 22866 results on 915 pages for 'ftp client'.

Page 435/915 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

  • What antivirus software supports updates without an internet connection?

    - by Michael Gundlach
    I'm putting antivirus software on Windows 7 computers in the middle of Africa. The computers don't have internet access, but still need to be protected against viruses from CDs and thumbdrives. Separate from these computers is one computer that does have extremely spotty internet access. What's the best AV software for this situation? The important part, as I see it, is that we need to keep the computers up to date, but can't let the AV software suck down updates at its leisure: the computers are disconnected, and getting emails onto the connected computer is a challenge enough. We thought we might transfer update files to the connected computer using a protocol that can handle repeated connection drops (e.g. FTP with resume.) Then we'd manually apply the update files to the disconnected computers. Does any AV software support this? Is there a better solution?

    Read the article

  • SSH hangs when executing command remotely

    - by Serty Oan
    Client : OpenSSH_5.1p1 Debian-5ubuntu1 (Ubuntu 9.04) Server : OpenSSH_5.1p1 Debian-5 (Proxmox 2.6.24-7-pve) I use SSH to execute commands remotely on the server (module check_by_ssh of Nagios). But SSH hangs from time to time when trying to execute commands. I can log to the server via SSH but not executing a simple 'ls'. And it seems to block from all clients from the same IP address. Authentication is not the problem, may it be made by SSH keys or password. ssh -l root -p 2222 server.domain.tld 'ls' Here the client debug info debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR *** skipping approx 40 env var ignored debug1: Sending command: ls debug2: channel 0: request exec confirm 1 It hangs there. Then after a random time, it works again (without doing anything). Killing all sshd process on the server seems to work too. It works from a Putty. I saw that some people had trouble like this due to ISP reverse DNS problem, but it does not seem to be the case here. It can work for hours and then not work for half an hour or so. What could explain this behaviour ?

    Read the article

  • How to track things that SHOULD happen, but might not have

    - by Kamiel Wanrooij
    I am running into a couple of issues with some applications we've deployed and maintain. I have the feeling we have approached this with some anti-patterns up to now, but I would like to see how to make this more flexible and stable. In one situation, we have a server at a client which pushes data to us to parse every night (yes, Windows Task Scheduler). This is highly unstable however, so once every month this doesn't happen because of reasons out of our control. This heavily impacts our business since we run with stale data in that situation. In another scenario we have a lot of background job processes that should be running. We already keep them up using bluepill ( http://www.github.com/arya/bluepill ) but obviously restarts happen, both automatically and manually, and people forget things or systems mess up. What I would like to track is events that should occur or should be available. Like the existence of a process, the execution of a program, or the creation/age of a file, and track it when they don't happen or exist. We develop most things in Ruby on Rails, use NewRelic, Bluepill and Munin, and run on Ubuntu. I've been toying around with counting ps aux | grep processname | wc -l in Munin scripts, or capturing the age of a file and raising alerts over 24-26 hours, stuff like that. Is there better tooling to track things that should happen, and raise alerts if they don't? P.S. I know some things are suboptimal, like manually having to define bluepill for applications and then forgetting to do so. The same goes for the push based approach of the first application, a dedicated daemon that manages that on the client side that we control and can track its connection to us might be a much better solution.

    Read the article

  • Can IP v4 and IP v6 share a single physical Ethernet?

    - by sleske
    I keep reading about the transition from IP v4 to IP v6, and the possible advantages and problems. One thing that keeps popping up is "dual-stack" networking, meaning (I believe) a host can speak both IPv4 and IPv6. I don't quite understand how this works, however. Can a host actually transmit using IPv4 and IPv6 at the same time over the same physical Ethernet (like e.g. HTTP and FTP can be used simultaneously)? Or is the physical network strictly IPv4 or IPv6, with the "other" protocol sent via tunneling?

    Read the article

  • sql server uninstallation issue

    - by angel
    I'm unable to remove SQL Server 2008 sp1 completely from my system. I'm using windows 7 ultimate. Everytime I try uninstalling it i get the following error. How can I remove it? here is the log: Overall summary: Final result: Failed: see details below Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: Failed: see details below Start time: 2013-06-24 21:10:38 End time: 2013-06-24 21:21:17 Requested action: Uninstall Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\sql_rs_Cpu64_1.log Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22 Machine Properties: Machine name: ABHI-PC Machine processor count: 4 OS version: Windows Vista OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services 1033 Enterprise Edition 10.0.1600.22 No Sql Server 2008 Management Tools - Basic 10.0.1600.22 No Package properties: Description: SQL Server Database Services 2008 SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9} ProductName: SQL2008 Type: RTM Version: 10 SPLevel: 0 Installation edition: ENTERPRISE User Input Settings: ACTION: Uninstall CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\ConfigurationFile.ini FEATURES: RS,SSMS,SNAC_SDK,CE_RUNTIME,CE_TOOLS,SNAC HELP: False INDICATEPROGRESS: False INSTANCEID: INSTANCENAME: MSSQLSERVER MEDIASOURCE: QUIET: False QUIETSIMPLE: False X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\ConfigurationFile.ini Detailed results: Feature: SQL Client Connectivity Status: Skipped MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Skipped MSI status: Passed Configuration status: Passed Feature: Reporting Services Status: Failed: see logs for details MSI status: Passed Configuration status: Failed: see details below Configuration error code: 0xFFD65603 Configuration error description: Input string was not in a correct format. Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\Detail.txt Feature: SQL Compact Edition Tools Status: Passed MSI status: Passed Configuration status: Passed Feature: SQL Compact Edition Runtime Status: Skipped MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: There are no scenario-specific rules. Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130624_210908\SystemConfigurationCheck_Report.htm

    Read the article

  • Finding the length of files and file path of directory structure in a Linux file system.

    - by Robert Nickens
    I have a problem on a Linux OS running a version of SMB where if the absolute path to a directory within a Shared Folder is greater than 1024 bytes and the filename component is greater than 256 bytes the SMB service crashes and locks out all other services for network access like, SSH and FTP rendering the machine mute. To keep the system for crashing I’ve temporarily moved a group of folders where I think the problem path may be located outside of Shared Folder. I need to find the file and file path that exceeded this limitation and rename them or remove them allowing me to return a bulk of the files to the Shared Folder. I’ve tried the find and grep commands without success. Is there a chain of commands or script that I can use to hunt down the offending files and directory? Please advise.

    Read the article

  • Vista Home Premium won't upload

    - by longhairedsi
    Hi, I have a sony vaio laptop(VGN-FW31J) running windows Vista Home Premium . I've had it over a year and file upload in a browser has never worked on any website in any browser(IE, Firefox, Chrome). I can select a file and the upload starts running but I always get a timeout. Sometimes it has worked once out of many attempts but only if the file is very small( < 50k). FTP does work. I've tried the following: Disabling anti virus Disabling firewall Can anyone help me here? i'm wondering if this is a vista problem or a vaio problem. Cheers

    Read the article

  • What is the best Linux distro for a php web server? [on hold]

    - by benjisail
    We are planning to upgrade our hardware and at the same time we plan to reinstall all our web server from a fresh OS. Currently our web server is running on CentOS 4.7 on a dedicated server. We are using Apache, Mysql, PHP, SVN, FTP and all the needed tools for a web server managed through SSH. We plan to use a cloud server for the new web server. I don't know which Linux distro to take for this new server. Should I stay with Centos and just take the latest release 5.4 or should I switch to something else like a Debian base distro (Ubuntu Server)? The thing that I didn't like with CentOS was the none availability of the latest version of PHP and Apache on Yum. This make it harder to keep our webserver updated with the latest technologies... Thanks for your help!

    Read the article

  • Simple CMS (separate files for multiple users) [closed]

    - by Pentium100
    I need a simple CMS software (or maybe it's called something else). There are many users (adding new users has to be simple as it will be done manually, no "sign up" link) and those users have to access (just download, no uploading or modification) some files. A file can be shown just to one user or a group of users (a user can belong to multiple groups). Upload a file and tag which users/groups can access it. This can probably be done with FTP, but HTTP would be better. Any software (preferable open source) that can do this without much modification? I can modify PHP code a bit, but I am not a programmer.

    Read the article

  • My servers been hacked EMERGENCY

    - by Grant unwin
    I'm on my way into work at 9.30 pm on a Sunday because our server has been compromised somehow and was resulting in a DOS attack on our provider. The servers access to the Internet has been shut down which means over 5-600 of our clients sites are now down. Now this could be an FTP hack, or some weakness in code somewhere I'm not sure till j get there. Does anyone have any tips on how I can track this down quickly. Were in for a whole lot of litigation if I dont get the server back up asap. Any help appreciated.

    Read the article

  • Connection between Windows Web Server in DMZ and Windows Application Server and MS SQL Database Server within LAN [closed]

    - by user1345260
    Excuse me for being naive. But I'm a newbie. We have a Windows Web Server within DMZ and a Windows Application Server and MS SQL Database Server. What ports do we open for connection between them? For example: Someone opens the Data Driven Website on the Web Server and they should be able see the data that the website is trying to access from the Database. Currently, I'm planning to open the following ports on the Web Server to establish the access, 80 HTTP 443 HTTPS 21 FTP 3389 RDP 53 DNS 1433 MS SQL Server Please validate my assumption. I would highly appreciate your help. Also, please provide me any articles on this topic so that I can read.

    Read the article

  • Internet compression proxy for low speed broadband?

    - by user23150
    I live in a rural location, using high-latency wireless off a local ISP's tower. My speed tests vary day to day, but I can get around 1Mb up/down. The problem is, I work with large files, uploading and downloading (HD videos, development software, etc.). It can be painful to wait sometimes. Plus I do some side contract game development, and it can be very difficult to playtest with other developers (200ms ping is a good day for me). Now, obviously it's not going to be easy to solve the latency problem without different wireless hardware. But speedwise, I am wondering if I can use some kind of compression technology on a proxy. For instance, my work computer has full access to a 26Mb down, 10Mb up connection, that is totally unused at night and the weekends. If I could run some kind of compression technology on our server, and use it as a proxy to route to my home computer, I could stand to gain some major speed. I realize that by bogging down a system with compression, I could potentially lose whatever speed gain I had. But the proxy server is a quad core xeon, and the receiving computer is a pretty decent i7 computer, so that shouldn't be a concern. I found http://toonel.net/ but it seems more geared toward very slow narrowband users, like dial-up. Plus, I would prefer to just be able to point my browser to a proxy server, rather then install software on my client machine. EDIT I thought about my question a little more, and realize I am going to need to install software on my client in order to decompress, and possible compress (for uploading). That's not a huge deal.

    Read the article

  • Group Policy - Published software not upgrading

    - by VokinLoksar
    I'm testing this with mercurial MSIs, but it's the same for other packages. I've created a new group policy and added an old version of mercurial to User software installation as a Published package. On a Windows 7 client I install the package through Programs and Features. The installation works fine. Now, I would like to publish an updated version of mercurial. I create a new Published package. Under 'Upgrades' I configure it to replace (upgrade also doesn't work) the old version and mark this upgrade as 'Required'. The old package is not removed. The Windows 7 client is then restarted. When I log back in, I see a status message saying something like 'Removing managed software Mercurial ...'. There is no message about installation of the upgrade. If I look in Programs and Features, I can see the new version of mercurial listed. However, the actual mercurial directory under Program Files is missing. It's as though the installation recorded information about the MSI, but didn't actually install anything after removing the old version. As I mentioned, this isn't specific to mercurial. I've tried using other apps and have yet to find one that can be upgraded via a Published package. Using Assigned packages in Computer Configuration works without problems, but I would like this software to be optional rather than required. Ideas?

    Read the article

  • Slow Gmail attachment download over HTTPS

    - by Todd
    It only affects Gmail. I have tested other HTTP, FTP and HTTPS websites and downloading is fine, at the exact same time the problem is affecting a Gmail attachment download. The symptoms include both: High waiting time, before the download starts (on the order of 30 seconds); AND Very slow download transfer speeds (on the order of 1kbps) It's a very strange problem, and I didn't find any recent issues relating to Google Australia. The account works fine at another site with a different ISP, so it's either a computer configuration or ISP - I lean to the latter.

    Read the article

  • centos 5.6, virtual on Vsphere

    - by Glasnhost
    suddenly my virtual centos server (5.6 on VMWare-VSphere) is not working... It started with the url not responding, nor the ip. (NO HTTP response, no ping). When I entered on the server via ssh to start troubleshooting I noticed that most of commands don't work anymore: top- machine hangs (it's not slow anyway) ps - machine hangs (funny enough apache server and web app are running and sending me emails) on some directory ls -l - machine hangs after first file, if ls l.txt the file show only the first file "more" command, also hangs on some file. So there are very little things I can try. I recovered my virtual machine from yesterday and before yesterday, and they show the same behaviour, it hangs on commands (but yesterday they were working). There is no firewall on the machine, there is on the host though. I can connect with ftp but I can't download files nor list directory apart the user top directory... Working hard right now, any idea appreciated

    Read the article

  • How can I migrate local users/groups from old Windows 2000 server to new Windows 2003 server?

    - by dmr83457
    On a Windows 2000 box I have setup local users and one group for the purposes of ftp sites for our clients to transfer files to their own site. We are now moving to a different server running Windows 2003. I would like to be able to transfer the users/group and related folders with permissions to the new server without setting them all back up by hand. I see tools available for migrating users to Active Directory but nothing for local to local migration. How should I go about doing this? Is there a capability already built into Windows 2000/2003 for this purpose? Thanks

    Read the article

  • apache access and error log written in same file

    - by user196075
    i have issue that access and error log are written in same file ! , the configuration in virtualhosts.conf as the following : <VirtualHost *:80> ServerName ************ ServerAdmin support@************8 DocumentRoot /var/www/html/*********.com ErrorLog /var/log/httpd/********/********.com_error_log CustomLog /var/log/httpd/********/********.com_access_log combined <Directory /var/www/html/***********.com> Options -Indexes FollowSymLinks AllowOverride All </Directory> </VirtualHost> as you see from the configuration each access and error logs should be save separately , but both logs are written in *.com_access_log , i have double check all permission , group and owner ... can't find anything wrong previous error in log file : [Thu Sep 19 14:15:02 2013] [error] [client 192.168.10.54] client denied by server configuration: /var/www/html/**********/show_has_offers.php i have tried to generate same error , i can find the hit in access log only as the following : 192.168.10.75 - - [24/Oct/2013:08:11:14 +0000] "GET /show_has_offers.php HTTP/1.1" 404 1586 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:22.0) Gecko/20100101 Firefox/22.0" 0 17332 and nothing in error log !! Please advice ...

    Read the article

  • Strange Domain name under the same IP Address

    - by Mike Chip
    There's something really weird happening in my server. But first things first: I wanted to have my website and chose the domain name "myowndomain.com", Now on my domain registrar I point "myowndomain.com" to the address of my recently setup VPS, let's say 50.50.50.50 So I installed everything I needed to run my website, and I started to notice strange queries coming from different IP Addresses. Like these [client 123.123.123.123] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php [client 456.456.456.456] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php or like this (Really a long line, I cut some things) GET /?s=vod-show-id-22-area-%E5%85%B6%E4%BB%96-language-%E9%9F%A9%E8%AF%AD.html HTTP/1.1" 301 295 "http://v.strangedomain.com/?s=vod-s ...[cut]... spider" That above is happening the most. The 'strangedomain.com' returns the same IP address of my VPS which my website is hosted on. The whois of such domain shows it's registered to a chinese. But the street name didn't look so right (like a huge single word), so I think all of that info might be fake, but still might be a chinese. I also noticed that all 'clients' trying to access the 'strangedomain.com' is coming from china. If I type in the browser 'strangedomain.com', I see my website. I'm worried, because my website is actually an e-commerce. I don't know if 'strangedomain.com' WAS a website on 50.50.50.50 in the not so far past, or if it's something else.

    Read the article

  • Cannot connect to my VPN Server from another network

    - by SantaC
    ok here is the deal. I have a Windows 2008 R2 server with RRAS installed configured for VPN. I also have DHCP running. On my DC I have AD running and they're connected with my domain. I am only using one NIC though. As a client I have Windows 7. So I tried connecting to my VPN server through my own network, which worked fine, so the setup is correct. However, when I tried connecting to my VPN server on another network, it does not work. I went to my brothers home and tried connecting to my server but it did not pass. So on my VPN server I have ip: 192.168.2.99 At my brothers house, i did the configuration on his windows 7 and it cannot connect to that ip. I am operating on the 192.168.2.1 network and he is operating on the 192.168.0.1 network. So how do I configure his client in order to get it to work? I tried changing his ip to the 192.168.2.x network, but i am not sure you can do that. I need some help here what to do.

    Read the article

  • What is the typical maximum number of database connections for Oracle running on Windows server ?

    - by Sake
    We are maintaining a database server that serve a large number of clients. Each client typically running serveral client-applications. The total number of connections to the database server (Oracle 9i) is reaching 800 connections on peak load. The windows 2003 server is starting to run out of memory. We are now planning to move to 64bit Windows in order to gain higher memory capability. As a developer I suggest moving to multi-tier architecture with conneciton pooling, which I believe is a natural solution to this problem. However, in order to support my idea, I want the information on: what exactly is the typical number of connections allowed for Oracle database ? What is the problem when the number connections is too high ? Too much memory comsumption ? or too many sockets opened ? or too many context switching between threads ? To be a little bit specific, how could Oracle Forms application scale to thousand of users without facing this problem ? Shall Oracle RAC applied to this case ? I'm sure the answer to this question should depend on quite a number of factors, like the exact spec of the hardware being used. I'm expecting a rough estimation or some experience from the real world.

    Read the article

  • Why is there no 64-bit Linux Firefox build?

    - by Legooolas
    It seems that I have to build my own 64-bit Firefox for Linux, as Mozilla won't support it until Firefox 4. Why is this? It looks to me as though it works fine, although without some of the speed improvements to the Javascript engine which the 32-bit version gets. (Edit: Yes I could run the 32-bit version but I'm trying to keep my system clear of 32-bit cruft and libraries etc, and all the plug-ins worked fine in 3.0.11 64-bit unofficial builds.) Update : No longer relevant as Mozilla provide 64-bit builds, but they don't show them on the download pages of mozilla.org, just on the ftp site as mentioned in one of the answers below.

    Read the article

  • .htaccess - Simulating virtual host wrong link to Parent Directory in Directory Listing

    - by ?????? ?????
    I have a domain dedicated for my local server (.dev), and an .htaccess file which redirects requests like http://folder.dev/subfolder/ to /htdocs/folder/subfolder. It works great and all, except for one minor issue. When I have the Directory Listing enabled, I can access all the folders, subfolders and files properly, except when I click on the Parent Directory link, which, for example, should lead to http://folder.dev, but redirects to http://folder.dev/folder/ and consequently throws 404 not found. Similarly, if Parent Directory should link to http://folder.dev/subfolder/, it links to http://folder.dev/folder/subfolder/. Here's how my .htaccess looks like: RewriteEngine On RewriteBase / RewriteCond %{REQUEST_URI} !(/$|\.) RewriteRule (.*) %{REQUEST_URI}/ [R=301,L] RewriteCond %{ENV:REDIRECT_SUBDOMAIN} ="" RewriteCond %{HTTP_HOST} ^(www\.)?([a-z0-9][-a-z0-9]+)\.dev\.?(:80)?$ [NC] RewriteCond %2 !^www|ftp|mail|pop3|localhost$ RewriteCond %{DOCUMENT_ROOT}/%2 -d RewriteRule ^(.*) %2/$1 [E=SUBDOMAIN:%2,L] RewriteRule ^ - [E=SUBDOMAIN:%{ENV:REDIRECT_SUBDOMAIN}] Apart from that one thing, everything else works fine (e.g. relative links in documents etc.)

    Read the article

  • Verify linux user passwords

    - by zero_r
    Hi there I got a linux server that has several dozen users. I also have the cleartext password for every user (i know - bad security). I would like to know if the passwords are correct. Since the users are all ftp users and have the nologin shell, I cannot just write a script to check if login works. How can I do a local check on passwords? Script output could look like this: $ check_userpw < user_pw_list.txt user1 ok user2 ok user3 mismatch! user4 ok Thanks

    Read the article

  • Have some questions about setting up a VPN to my private cloud servers

    - by Pure.Krome
    I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

    Read the article

  • Can I use Veritias Storage Manager to provide HA storage using server-local storage?

    - by Paul
    I have a need to provide an high-availability ftp/http file repository. Upload will happne to one server, but the uploaded file must be immediately visisble on all other servers I can handle the failover of the servers themeselves using load balancers. But in the event of failure of one server, the other servers must see the same contents of the repository. Normally, I'd use a SAN for this, but in this case the data centre standards do not allow SAN/external storage - all storage will be local to the servers. Cam I use Veritas Storage Manager (or any other product) to manage mirroring hte contents between servers in this way? Or does that require a SAN? I couldn't tell either way from a quick look at the data sheets etc.

    Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >