Search Results

Search found 71338 results on 2854 pages for 'windows vista software'.

Page 435/2854 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• Installing additional printer drivers (x86) on Windows 7 (x64)

  - by ambrax

  I've successfully installed Windows 7 (x64) and drivers for my Canon MP510, and have no problem printing with this setup. There is another PC in the network running XP SP3, and I want to share the printer so that users of that PC can also print. On W7 I have the option of installing additional printer drivers for other system architectures (Itanium and x86). I've downloaded the most current 32-bit drivers for the printer, but every time I direct the install dialog to the folder containing the drivers, I get the following error message: Selected printer driver not found The specified location does not contain the driver Canon Inkjet MP510 Printer for the requested processor architecture. Retry Cancel I'm stumped. I'm absolutely certain that the specified location actually does contain the correct drivers; I've even installed them on the XP system. I've tried everything I can think of. What am I overlooking?

  Read the article

• RDP locks up login, doesn't unlock on Windows

  - by private_meta

  From time to time, my system, when I try to login TRHOUGH or AFTER a remote connection, locks up the login session. I can't login anymore, the screen turns black (the monitor is still active, the image is black). Especially in the recent case, the system did not come back from the lock-up, and I had to reset the computer. Any idea what might be the issue here? More information: Both Computers are Windows 7, The RDP Server has a wired connection, the Client has either Wireless or Wired. The network card involved on the server is a "Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)" card built-in on an ASRock Mainboard. I'm using either local LAN or internet connection through NAT/Router.

  Read the article

• windows 2008 server move users to new server

  - by moos3

  I have a new server that is replacing a current windows 2008 server r2. I want to move all the local users and IIS sites to the new box. Is there away to export the two and import them on the new box? I have sync'd all the files for all the sites to the new box. This box doesn't belong to a domain so its not a matter of joining to the domain. The users I'm talking about are the local computer users.

  Read the article

• SoX on Windows 7 64-Bit Outfile Missing

  - by Christian

  I have come across the strangest problem when trying to run sox.exe on my Windows 7 installation. Whenever I try and record audio it works without any issues but it will not output an audio file. The crazy thing is that when I use the play command it successfully plays what I just recorded. Has anyone ever heard of this happening? Here are the commands (and output) that I'm using: C:\Program Files (x86)\Vox\sox-14-4-0>sox -d test.wav trim 0 00:05 Input File : 'default' (waveaudio) Channels : 2 Sample Rate : 48000 Precision : 16-bit Sample Encoding: 16-bit Signed Integer PCM In:0.00% 00:00:05.03 [00:00:00.00] Out:240k [ | ] Clip:0 Done. C:\Program Files (x86)\Vox\sox-14-4-0>play test.wav test.wav: File Size: 960k Bit Rate: 1.54M Encoding: Signed PCM Channels: 2 @ 16-bit Samplerate: 48000Hz Replaygain: off Duration: 00:00:05.00 In:100% 00:00:05.00 [00:00:00.00] Out:240k [ | ] Clip:0 Done. Am I losing my mind or is something up here?

  Read the article

• How to pin NetBeans to Windows 7 taskbar?

  - by Vilx-

  I've googled around and it seems that I'm not the only one with the problem, however I couldn't find the solution. Maybe someone around here has figured it out. The problem is that netbeans.exe is actually a stub which is calling javaw.exe. When I try to pin the NetBeans process to the taskbar I actually pin "Java(TM) Platform SE Binary". That changes the icon and the pin doesn't work. The funny thing is that it works on another machine. I don't know whether it's because it's a different version of NetBeans, or a different version of Java. Has anyone figured this out? Added: I know this is sort of not programming related; on the other hand there are plenty of topics around here about how to better your programming environment, and this one is no worse than those. Oh, and btw - Windows 7 Enterprise x64; Java JDK 1.6.17; Netbeans 6.8

  Read the article

• How to set up a PC which can be booted from Linux AND Windows?

  - by Martin

  Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

  Read the article

• Windows 2003 Server Intermittent DNS Issues

  - by Mike

  Looking for a little help here. I have a Windows 2003 DNS Server set up on our network. Lately computers on our LAN have been, at times, unable to resolve a certain sub domain for our website whereas other times the request is resolved just fine. During these periods of "downtime" all other network activity (i.e web sites, internal resolutions, network shares, etc.) remains normal. I can tell it is a problem with our DNS server because the resolution always works from outside our network. I'm hoping someone out there has experienced something similar or could at least offer me place to start troubleshooting. Thanks!

  Read the article

• ADD ROUTE command in windows 2008R2

  - by Mehrdad Kamelzadeh

  I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

  Read the article

• ctrl-c, ctrl-v not working on Windows 7

  - by Beth

  I'm trying to use my Windows 7 PC, and for some reason, Ctrl-C to copy and Ctrl-V to paste only work intermittently. I have a third-party clipboard viewer installed, so I can see when Ctrl-C doesn't copy to the clipboard (there's no new entry) and also when Ctrl-V pastes glarp (the cursor moves, sometimes several lines) instead of what's on the clipboard. I've checked the keyboard and mouse drivers, run a system scan, checked the event log and a bunch of other things I've seen online, and haven't found a resolution. Any other ideas for things to check or try?

  Read the article

• Setting Screen Resolution for Extended Display on Windows 8

  - by ptamzz

  I'm using a Dell Inspiron laptop with Windows 8 Developers Preview. I've connected a second screen (some Dell 22 inch one) and have been using it with 'Extend these displays' options in the Screen Resolution settings. It use to be all fine but yesterday I changed my VGA cable to the 2nd monitor and since then the resolution of the 2nd monitor is not setting properly. Earlier, while auto detecting the monitor, the right resolution use to appear but now, as you can see from the attached image, none of the resolution in the drop down fits with the right proportion. So how do I set the right screen resolution. (I think the right one is 1680 x 1050 which is not there in the list)

  Read the article

• Batch edit (not rename) file properties in windows

  - by Jay

  I have a large directory of downloaded shareware. I keep track of what i have by individually editing the properties of each program. However, some of the programs are multipart .rar types. And i have at least a few hundred programs so far. I am looking for a utility that will let me batch edit file properties such as Title, Author, Summary, and Comments, so I don't have to edit each file or file part individually. Windows doesn't let me do this in Explorer. Powerdesk has a proprietary system, but it isn't preserved when moving or copying files. Any Suggestions?

  Read the article

• Windows Server 2008 r2 FTP blocking outside connections

  - by nbon

  I have a windows server 2008r2 running IIS 7.5. I am trying to setup a FTP-server in IIS but I'm running into some annoying problems. Setting up the server works fine but when I try to connect from a remote client the connection times out. I have tried to connect to the FTP-server from the localhost and it works flawlessly. I figured that it should be some trouble with the firewall so I went into firewall settings and disabled the Public Profile and my remote connections worked! In my inbound rules there are rules for FTP-connections to allow all profiles etc. I guess they are made automatically when setting up the FTP-server. Anyone got any idea how to allow remote connections without turning off the public firewall?

  Read the article

• Make the Windows 8 Mail app sync and notify Gmail labels

  - by Matsemann

  My Windows 8 Mail app is connected with Gmail, and is set to sync emails and download emails on arrival. Most of my mail isn't going to the inbox, but is going straight to different labels. Say, all work related mail is going straight to the label Work. The problem is that when I have unread email in Work, the Mail app will not tell me. It will only display a label, Work, I can click on, not Work (1) indicating unread mails. When clicking the label, I will need to wait for some time for it to actually download and sync the mail before anything shows. Even if I tried force syncing just before. So: The Mail app is not syncing my labels, and will not give any visuals that a label contains unread mail. Is there any way to achieve this? Without it, the Mail app is unfortunately pretty useless to me.

  Read the article

• how to reinstall Asus notebook using Recovery DVD?

  - by Radek

  a friend of mine asked to reinstall his Asus notebook. He didn't want Vista anymore so I installed XP. Re-partitioned the hdd (no more recovery partition). Everything went fine except I cannot make LAN card work. I created a question for that. And I talked to Asus help desk but it didn't help so we decided to go back to Vista. I have the original Recovery DVD for his notebook. With files like ASUS.SWM and ASUS2.SWM. But I do not know how to use this DVD to reinstall his notebook. Did I mention that his DVD drive mostly doesn't work?

  Read the article

• Windows non-responsive during Remote Desktop connection

  - by pvieira

  This is Windows 7 Ultimate 64 bit. I use the command mstsc to establish a Remote Desktop connction to a remote server. The login window shows up, and while I'm entering the password the system almost freezes. Each character of the password takes 3 or 4 seconds to be accepted, and all other opened programs are not accessible. This behavior tends to happen only the first time I use mstsc. If I used it again moments later, everything is normal. Whar can be the cause of this problem?

  Read the article

• How to diagnose a Windows XP hard crash

  - by Jon

  I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• Windows 2008 Server Unable to activate with other methods

  - by matt king

  I'm trying to activate windows 2008 server SP2 today since the activation trial is done. I do not have an internet connection with this server so I can not activate online, and with the other servers in this farm I've been able to run the slmgr -ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx and then it would open up the activate by phone method and we would just activate that way. I say again, I don't have an internet connection so I can not do the online activate. If I do the slui 4 it brings up the activation window but show me other ways to activate is still greyed out. I've disabled the NIC on this Hyper-V server and I still can not get the other way to activate to show up... Anyone have any ideas? This computer is one of my AD servers so.. it being in notification mode kind of sucks. Thanks.

  Read the article

• Print Screen key of Windows on Mac

  - by mgpyone

  I've tried Win 7 on my MacBook. then I'm facing a problem of capturing the screen . I want to take the screen shot of the whole screen(including the cursor) . I'm sure that I can grab it with the key "Print Screen" . but I don't found any key for it on my Mac. also though Windows Snippet tools can take the whole screen, I've to use the cursor .. Thus, any solution that can help out my problem will be appreciated.

  Read the article

• Very slow Windows 7 on Thinkpad T61

  - by bogdanf

  I have a very strange problem with my fresh install of Windows 7 Profesional, 64bits on my Lenovo Thinkpad T61 : The overal performance is very slow, the disk is constantly spinning, even without any program running (after boot, no other programs installed). The boot process is very slow itself (4-5 minutes). I mention that the laptop was fine on XP until the upgrade. Thanks ! Additional info (as requested by the comments) : 2GB RAM Yes, I added all the manufacturer (Lenovo) drivers and updates (using the utility provided by Lenovo) Tried with both 32 and 64 bits editions. The 32 bits one is performing a little better, but not very usable either. The hdd has enough space (20 GB or so) The problem is still present on a fresh install, so no recycle bin emptying or unistall programs (there aren't any except plain 7) would help. I'm not a newbie, so no obvious causes are left unchecked

  Read the article

• windows 2008r2 SNMP hrStorageSize reporting wrong values

  - by Giannis Nohj

  I'm trying to monitor disks on windows 2008 R2 system, but I'm getting wrong values returned from hrStorageSize and hrStorageUsed for one of the 2 disks the system has. Local disk C: is returning correct values, whereas D: disk, which is an SAN disk, is reporting 32G instead of 500G. Output of snmpwalk -v 2c -c public hostname-01 .1.3.6.1.2.1.25.2 : HOST-RESOURCES-MIB::hrStorageDescr.1 = STRING: C:\ Label: Serial Number 7ff87ca6 HOST-RESOURCES-MIB::hrStorageDescr.2 = STRING: D:\ Label:Data Serial Number dab5b0b9 ... HOST-RESOURCES-MIB::hrStorageAllocationUnits.1 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageAllocationUnits.2 = INTEGER: 4096 Bytes ... HOST-RESOURCES-MIB::hrStorageSize.1 = INTEGER: 35834383 HOST-RESOURCES-MIB::hrStorageSize.2 = INTEGER: 7864320 ... HOST-RESOURCES-MIB::hrStorageUsed.1 = INTEGER: 32460169 HOST-RESOURCES-MIB::hrStorageUsed.2 = INTEGER: 3192302 I have calculated the first disk (C:) size as 136G, which is correct. On the other hand, D: is calculated as 30G, where it should be 500G. I also tried fsutil on the system and the output was correct. Anyone have any ideas?

  Read the article

• Apache on Windows random long wait times

  - by Jaxbot

  I have a development machine with Apache installed as a service on Windows. The installation is fresh out of the box, with no changes to configuration aside from adding the PHP module. From day one, I've had a problem that looks like this: Essentially, Apache is freezing for about 11 seconds before replying on random requests. This appears to happen more frequently when the host hasn't been connected to in a while, but this is not always the case. I've eliminated MySQL, PHP, and the specific application; this long wait problem will occur even when loading a static file such as favicon.ico. Thus, the only factor remaining is Apache, which is freezing for consistently around 10-11 seconds before replying. The problem is not the DNS problem that many people point to; as you can see, the DNS lookup is instant, and the problem occurs both on localhost and 127.0.0.1. Thanks for the time.

  Read the article

• Resize a RAID 1 volume on OSX Snow Leopard - how? (Note: software raid)

  - by Emmel

  I've scoured the Internet in search of an answer to this question, and as usual with OSX-related topics, I often don't find any deep-dive technical explanations sufficient enough to feel confident doing dangerous things. Here is my question: I have a Mac Pro, running OSX 10.6.2. I have, as my main root/boot disk, a RAID 1 volume called "Mirror1". Mirror1 is comprised of two 1 TB disks. Mirror1, however, is fixed at 640 GB. That's because, I originally took a 640GB disk, bought a terabyte disk, mirrored it (using diskutil appleraid enable...), when it synced I removed the 640GB and replaced it with a second 1 TB disk, and synced again. Voila! A single 640 GB replaced by two 1 TB disks in a mirror.. Actually, no. There's still something missing from the equation: Mirror1 needs to be expanded from 640GB to 1 TB to match the partition sizes on each of those disks. How do I do this? Perhaps the diskutil output will help: -> diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI 209.7 MB disk0s1 2: Apple_RAID 999.9 GB disk0s2 3: Apple_Boot Boot OSX 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI 209.7 MB disk1s1 2: Apple_RAID 999.9 GB disk1s2 3: Apple_Boot Boot OSX 134.2 MB disk1s3 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *640.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Mac Disk 2 536.7 GB disk2s2 3: Microsoft Basic Data BOOTCAMP 103.1 GB disk2s3 /dev/disk3 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Mirror1 *639.8 GB disk3 -> diskutil appleraid list AppleRAID sets (1 found) =============================================================================== Name: Macintosh HD Unique ID: 1953F864-B474-4EB6-8E69-41834EBD0247 Type: Mirror Status: Online Size: 639.8 GB (639791038464 Bytes) Rebuild: manual Device Node: disk3 ------------------------------------------------------------------------------- # Device Node UUID Status ------------------------------------------------------------------------------- 0 disk1s2 25109BAE-5697-40EA-B612-0217851444F7 Online 1 disk0s2 11B83AB0-8148-4DB6-8761-DEF08C855F8D Online =============================================================================== Thanks in advance.

  Read the article

• Windows 7 Permissions

  - by Scott

  I have an odd problem with a windows 7 laptop. It's a single user installation currently. This is a fresh install on an Asus laptop. I have a svn repo checked out on my second partition. I have a directory which I have added to svn:ignore list, because it is for tmp files. This specific directory shows as read-only. I need write access on this directory for my project to function properly. If I right click and modify the directory to be not be read only and run this recursively, it simply is immediately reverted back to a read-only directory. I have also modified apache's service to run as myself to no avail. I'm stumped... Any ideas?

  Read the article

• Launch apps or run commands on Windows via shortcuts

  - by Francisc

  Is it possible to register shortcuts on Windows 7 so that regardless where you are looking (Desktop, a folder etc) the shortcut gets "heard" and the appropriate action is performed. For example, creating a shortcut in the System32 folder which will work if you use Run with the shortcut's name, will not work if you set a key combination when focus is set on the Desktop for example. Is there a native way of registering top-level shortcuts or even an application for enabling this? Example of things I want keyboard shortcuts for: open a specific folder like %path% create a new .js file in the current folder launch an application eventually with its path set to the current location if the app supports this (e.g. command prompt) Thank you.

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >