Search Results

Search found 26509 results on 1061 pages for 'network manager'.

Page 436/1061 | < Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >

  • Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

    - by ale
    I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

    Read the article

  • How to route traffic through a specific SOCKS proxy on a per-app basis?

    - by GJ.
    I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis? It would also be helpful to know if there's a way to perform such routing globally, based on specific IP addresses (as this could allow for some reasonable workaround).

    Read the article

  • Debian: Firefox or Iceweasel default printer for POS station

    - by Bubnoff
    Context Using Debian 6.04 "Squeeze" as POS station. There are two printers installed: Network printer and a receipt printer It absolutely must be able to print by default to the receipt printer on a certain website though the system default is a network printer. In Debian ...it doesn't. Problem I've set up XP, 7, Ubuntu and even Mac OSX this way, so I'm no stranger to setting Firefox up this way ...same Iceweasel/Firefox settings ...complete fail. Always uses system default no matter what the settings, or, which printer you print from. To get this to work on other systems you do this: Print a page in Firefox using desired printer. Ensure print.save_settings is true. Firefox remembers last printer used Set print.always_print_silent = true The end. This works on every OS I've set up ....except Firefox and Iceweasel in Debian. My only recourse seems to be to set the receipt printer as default or go back to bloaty Ubuntu/Mint ...etc.

    Read the article

  • Searching For a Desktop Security Software to harden Windows machines, anybody?

    - by MosheH
    I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So if anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

    Read the article

  • Geo for Good Summit Highlights

    Geo for Good Summit Highlights The last week of September, Google hosted the Geo for Good User Summit, for nonprofit mapping and technology specialists to update the nonprofit community about new and special features of Google's mapping products. In this week's Maps Developers Live event, Mano Marks from Maps Developer Relations and Raleigh Seamster, Program Manager with the Google Earth Outreach team will talk about the highlights of the Summit and show off some great examples of people using Maps to help the world. From: GoogleDevelopers Views: 0 0 ratings Time: 00:00 More in Education

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

    - by Peter Mounce
    I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • Confusion about inheritance

    - by Samuel Adam
    I know I might get downvoted for this, but I'm really curious. I was taught that inheritance is a very powerful polymorphism tool, but I can't seem to use it well in real cases. So far, I can only use inheritance when the base class is an abstract class. Examples : If we're talking about Product and Inventory, I quickly assumed that a Product is an Inventory because a Product must be inventorized as well. But a problem occured when user wanted to sell their Inventory item. It just doesn't seem to be right to change an Inventory object to it's subtype (Product), it's almost like trying to convert a parent to it's child. Another case is Customer and Member. It is logical (at least for me) to think that a Member is a Customer with some more privileges. Same problem occurred when user wanted to upgrade an existing Customer to become a Member. A very trivial case is the Employee case. Where Manager, Clerk, etc can be derived from Employee. Still, the same upgrading issue. I tried to use composition instead for some cases, but I really wanted to know if I'm missing something for inheritance solution here. My composition solution for those cases : Create a reference of Inventory inside a Product. Here I'm making an assumption about that Product and Inventory is talking in a different context. While Product is in the context of sales (price, volume, discount, etc), Inventory is in the context of physical management (stock, movement, etc). Make a reference of Membership instead inside Customer class instead of previous inheritance solution. Therefor upgrading a Customer is only about instantiating the Customer's Membership property. This example is keep being taught in basic programming classes, but I think it's more proper to have those Manager, Clerk, etc derived from an abstract Role class and make it a property in Employee. I found it difficult to find an example of a concrete class deriving from another concrete class. Is there any inheritance solution in which I can solve those cases? Being new in this OOP thing, I really really need a guidance. Thanks!

    Read the article

  • How to correctly set up iWARP? Preferably on loopback

    - by ajdecon
    iWARP is a protocol for doing remote direct memory access (RDMA) on top of TCP/IP, so that it can work with Ethernet and other network types as opposed to Infiniband. It works with many of the standard IB interfaces - the IB verbs, for example - so it's all pretty transparent. I'm doing some IB-verbs programming (mostly for the sake of learning about how they work better), and it'd be wonderfully convenient for me if I could use iWARP to do RDMA over my loopback interface, so that I could test some of my code without getting on our IB-connected cluster. :-) But I cannot figure out how to get a "local development environment" set up: there are no tutorials I'm aware of for even setting up iWARP from scratch on a server or a network interface. Can anyone give me a tutorial or point me in the right direction? Environment is Fedora 16 running in VirtualBox.

    Read the article

  • Add a hook to run when NetworkManager connects

    - by rplevy
    What would be a good way to make a script run every time my computer connects to the network in Ubuntu? Would I somehow use dbus to do this? Background: when I'm on the train I run a short Perl script to click a button on the splash page. That way I can immediately use the internet without having to manually visit a pointless website. My script is a near-perfect solution, but it would be perfect if it could run automatically any time I connect to the network.

    Read the article

  • Accessing the Internet via browser

    - by ucas
    I am on Windows 7 and using Firefox browser. I am using WiFi, but since the morning I cannot access the Internet via the browsers (Firefox, Chrome, or IE). The laptop shows there is Internet connection, Skype is online, but I can't reach the Internet. Then I launched Tor application which creates secure channel and provides its Firefox browser. Well, I can now access the Internet over that browser. So, what might be the problem causing this malfunction? The error: The connection has timed out The server at mail.google.com is taking too long to respond. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Best regards

    Read the article

  • mac + parallels and https site test = router restarts

    - by Erik
    Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

    Read the article

  • Simple NAT router for ESX

    - by Evan M.
    Hi Guys, I'm looking for a simple virtual appliance that I can deploy to my ESX environment to use as a virtual NAT router / firewall to create an isolated network that I can easily give internet access too. Basic setup: ESX Host, has 2 vswitches configured: 1 is connected to the physical LAN, the other is isolated. I need an appliance that I can add 2 vNICs to, and attach one to the isolated vSwitch, the other to the LAN, to give the isolated network outbound access (so it can reach the internet). Anyone have an appliance that I can setup quickly to do so? Thanks.

    Read the article

  • why do Vagrant docs suggest using public IP address 33.33.33.10 for local VMs?

    - by Gert
    I'm following a tutorial to set up vagrant (a tool to build and configure portable virtual machine images), and it seems that vagrant documentation suggests using IPv4 address 33.33.33.10 to configure a new box. That is a publicly routed IP adress, so I'm a bit confused why using this address is suggested. Since I don't own this network, I should not use an address from the 33.33.33.10/8 range. Am I correct in thinking that I should only use either a public address from a network I own, or an address from one of the private ranges as defined in RFC 1918? If so, why does Vagrant documentation suggest otherwise?

    Read the article

  • Issues connecting to WPA2 with User Authentication Mavericks?

    - by heinst
    I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect to other networks, but not my schools. Its a WPA2 network with a User Authentication. And my MacBook is a 2011? 2.2 GHz first gen i7 Quad Core with 8 GBs of RAM. Does anyone else have the same issue? Any tips on how to fix it? Thanks! heinst

    Read the article

  • "Play on another device" function not working with Samsung Allshare

    - by Tural Teyyuboglu
    Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

    Read the article

  • VLC RTP Streaming in FC12

    - by Matt D
    I'm trying to get VLC to work streaming RTP audio/video over my office network. The goal is multicast a/v streaming. In all test cases, we are streaming from VLC to VLC. I am able to stream from Windows to Windows, and from Fedora to Windows, but not from Windows to Fedora. Additionally, I am unable to receive a LOCAL stream from one instance of VLC to another, within Fedora. I don't see any reason why this would be. The buffer indicator (where the elapsed/total time is normally displayed) never shows any connectivity, so it would appear to be a network problem, but since I am able to stream from Fedora to Windows (same IP, same port) I thought it would be something else. Does anyone know of a solution to this issue?

    Read the article

  • Failed to start up after upgrading software

    - by Landy
    I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

    Read the article

  • Frequent disconnects using wlan AR9285

    - by John Neil
    I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

    Read the article

  • How do I remove this duplicate sources.list entry?

    - by blade19899
    Sometimes, when I run sudo apt-get update or install an app sudo apt-get install I get the error below at the bottom in the gnome-terminal and I can't remove it. I searched for it in the software-sources and in y-ppa-manager and I am not sure I want to mess with the sources list since I am a bit of a noob. Duplicate sources.list entry http://archive.canonical.com/ubuntu/ oneiric/partner amd64 Packages \ (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_oneiric_partner_binary-amd64_Packages)

    Read the article

  • Webcast Q&A: ING on How to Scale Role Management and Compliance

    - by Tanu Sood
    Thanks to all who attended the live webcast we hosted on ING: Scaling Role Management and Access Certifications to Thousands of Applications on Wed, April 11th. Those of you who couldn’t join us, the webcast replay is now available. Many thanks to our guest speaker, Mark Robison, Enterprise Architect at ING for walking us through ING’s drivers and rationale for the platform approach, the phased implementation strategy, results & metrics, roadmap and recommendations. We greatly appreciate the insight he shared with us all on the deployment synergies between Oracle Identity Manager (OIM) and Oracle Identity Analytics (OIA) to enforce streamlined user and role management and scalable compliance. Mark was also kind enough to walk us through specific solutions features that helped ING manage the problem of role explosion and implement closed loop remediation. Our host speaker, Neil Gandhi, Principal Product Manager, Oracle rounded off the presentation by discussing common use cases and deployment scenarios we see organizations implement to automate user/identity administration and enforce closed-loop scalable compliance. Neil also called out the specific features in Oracle Identity Analytics 11gR1 that cater to expediting and streamlining compliance processes such as access certifications. While we tackled a few questions during the webcast, we have captured the responses to those that we weren’t able to get to here; our sincere thanks to Mark Robison for taking the time to respond to questions specific to ING’s implementation and strategy. Q. Did you include business friendly entitlment descriptions, or is the business seeing application descriptors A. We include very business friendly descriptions.  The OIA tool has the facility to allow this. Q. When doing attestation on job change, who is in the workflow to review and confirm that the employee should continue to have access? Is that a best practice?   A. The new and old manager  are in the workflow.  The tool can check for any Separation of Duties (SOD) violations with both having similiar accesses.  It may not be a best practice, but it is a reality of doing your old and new job for a transition period on a transfer. Q. What versions of OIM and OIA are being used at ING?   A. OIM 11gR1 and OIA 11gR1; the very latest versions available. Q. Are you using an entitlements / role catalog?   A. Yes. We use both roles and entitlements. Q. What specific unexpected benefits did the Identity Warehouse provide ING?   A. The most unanticipated was to help Legal Hold identify user ID's in the various applications.   Other benefits included providing a one stop shop for all aggregated ID information. Q. How fine grained are your application and entitlements? Did OIA, OIM support that level of granularity?   A. We have some very fine grained entitlements, but we role this up into approved Roles to allow for easier management.   For managing very fine grained entitlements, Oracle offers the Oracle Entitlement Server.  We currently do not own this software but are considering it. Q. Do you allow any individual access or is everything truly role based?   A. We are a hybrid environment with roles and individual positive and negative entitlements Q. Did you use an Agile methodology like scrum to deliver functionality during your project? A. We started with waterfall, but used an agile approach to provide benefits after the initial implementation Q. How did you handle rolling out the standard ID format to existing users? A. We just used the standard IDs for new users.  We have not taken on a project to address the existing nonstandard IDs. Q. To avoid role explosion, how do you deal with apps that require more than a couple of entitlement TYPES? For example, an app may have different levels of access and it may need to know the user's country/state to associate them with particular customers.   A. We focus on the functional user and craft the role around their daily job requirements.  The role captures the required application entitlements.  To keep role explosion down, we use role mining in OIA and also meet and interview the business.  It is an iterative process to get role consensus. Q. Great presentation! How many rounds of Certifications has ING performed so far?  A. Around 7 quarters and constant certifications on transfer. Q. Did you have executive support from the top down   A. Yes  The executive support was key to our success. Q. For your cloud instance are you using OIA or OIM as SaaS?  A. No.  We are just provisioning and deprovisioning to various Cloud providers.  (Service Now is an example) Q. How do you ensure a role owner does not get more priviliges as are intended and thus violates another role, e,g, a DBA Roles should not get tor rigt to run somethings as root, as this would affect the root role? A. We have SOD  checks.  Also all Roles are initially approved by external audit and the role owners have to certify the roles and any changes Q. What is your ratio of employees to roles?   A. We are still in process going through our various lines of business, so I do not have a final ratio.  From what we have seen, the ratio varies greatly depending on the Line of Business and the diversity of Job Functions.  For standardized lines of business such as call centers, the ratio is very good where we can have a single role that covers many employees.  For specialized lines of business like treasury, it can be one or two people per role. Q. Is ING using Oracle On Demand service ?   A. No Q. Do you have to implement or migrate to OIM in order to get the Identity Warehouse, or can OIA provide the identity warehouse as well if you haven't reached OIM yet? A. No, OIM deployment is not required to implement OIA’s Identity Warehouse but as you heard during the webcast, there are tremendous deployment synergies in deploying both OIA and OIM together. Q. When is the Security Governor product coming out? A. Oracle Security Governor for Healthcare is available today. Hope you enjoyed the webcast and we look forward to having you join us for the next webcast in the Customers Talk: Identity as a Platform webcast series: Toyota: Putting Customers First – Identity Platform as a Business Enabler Wednesday, May 16th at 10 am PST/ 1 pm EST Register Today You can also register for a live event at a city near you where Aberdeen’s Derek Brink will discuss the survey results from the recently published report “Analyzing Platform vs. Point Solution Approach in Identity”. And, you can do a quick (& free)  online assessment of your identity programs by benchmarking it against the 160 organizations surveyed  in the Aberdeen report, compliments of Oracle. Here’s the slide deck from our ING webcast: ING webcast platform View more presentations from OracleIDM

    Read the article

  • Configure IIS 6 to deny access to specific file based upon IP address

    - by victorferreira
    Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

    Read the article

  • NAT and ISP Subnet when load balancing on pfsense?

    - by dannymcc
    I have a pfsense box that I'm trying to plan the configuration for. I am going to be load balancing two ISP's, each with their own /29 static IP subnet. The question I have is in relation to the way those IP's are associated with workstations on the local network. Currently I have some workstations with local (192.168.1.0/29) IP addresses, and other more complicated workstation setups have their own public IP address. Some of the more complicated systems have a NAT 1:1 configuration where I forward a public IP address to a local IP address. Others however are directly on the ISP subnet and cannot be seen on our local network. Is this configuration possible with pfsense? If so, what terms should I be looking through the documentation for? Here is a simple/brief diagram of what I am trying to achieve.

    Read the article

  • Slow LAN transfer from 3rd party computer

    - by Chris
    Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

    Read the article

< Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >