Search Results

Search found 24106 results on 965 pages for 'usb key'.

Page 436/965 | < Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >

• Can't install Ubuntu in a HP DV6 Laptop

  - by EApubs

  I just bought an HP DV6 6011tx (link) Laptop... I formated the disk through Windows and prepared for installing Ubuntu... When I insert the live CD, it shows the ubuntu start screen and then everything goes black (no cursor... Just like the screen is switched off (but the system is working)) When i try to install from the USB, it says Live media is not found! Some times it also give a black screen like the CD... Have any idea how to fix this? Thanks

  Read the article

• After reinstalling ATI graphics drivers, my keyboard and mous aren't working anymore

  - by Lifelike27

  On Ubuntu 11.04 I tried to install the open source drivers for my laptops ATI Mobility Radeon 5470M but I messed that up a bit and lost xserver. Now I've managed to solve that problem with this and by downloading the ATI proprietary drivers and install those manually. Now, when Ubuntu loads up I get to the login screen but I can't use my mouse or my keyboard (usb keyboard and mouse doesn't work either). If I use the recovery console, then login with that and then run 'startx'. I can login fine (though Unity doesn't show, the graphics seem to be working because it shows the fading animation of libnotify), but I can't type or move my mouse.

  Read the article

• How to prevent WLAN connection from dropping permanently?

  - by Chris

  I have a desktop with a Fritz USB WLAN N stick and tried Ubuntu 12.04. Installation went fine and WLAN is working. However, connection drops permanent. Reconnecting manually fixes it but after a few minutes it drops again. It's connected to a Vodafone 802 box with WLAN N fix set. It seems that it works when I switch off N mode. But I need to test. Can someone confirm this issue or is there another solution? I have another machine with 12.04 (HP 625 laptop) running where connection is stable.

  Read the article

• How to hide bind mounts in nautilus?

  - by Bazon

  Summary: How do I remove folders mounted via bind or bindfs in /etc/fstab from appearing as devices in nautilus left column, the "places" view? detailed: Hello, I mount various directories from my data partition via bind in /etc/fstab in my home directory, eg like this: #using bind: /mnt/sda5/bazon/Musik /home/Bazon/Musik none bind,user 0 0 #or using bindfs bindfs#/mnt/sda5/tobi/Downloads /home/tobi/Downloads fuse user 0 0 (Background: /dev/sda5 mounted to /mnt/sda5 is my old home partition, but I do not want to mount it as a home partition, as I always have at least 2 Linuxes on the computer ...) That works well, but since 12.10 every one of those items is listed in Nautilus in the left column under "Devices". (Where normally USB drives appear, etc.) This is a waste of space (as I have many of such mounts...) and so I would like to have these mounts hidden, just as it was before in 12.04. How can I do that? Thanks!

  Read the article

• Toshiba satellite L500 no Wifi anymore!

  - by Benjamin Piller

  I have a Toshiba Satellite L500 with Ubuntu 12.04 and its wifi suddenly stopped working!! I've never seen like that before.. I tried also using external USB wifis but no success. I am not able to turn it on with the function keys nor using rfkill commands and similar WLAN manipulator Commands in the terminal! It was working before for at least 4-5 months!! The computer says it's turned off by hardware. I checked it and the Driver is fine. So why can i not use any Wifi on my computer?? Why it is suddenly disabled? I checked the BIOS too there is enabled the WLAN. I spent 10 hours for searching for solutions but i am out of ideas!!! Please Help!

  Read the article

• C# extension method doesn't seem to exist

  - by blahblah

  I can't seem to get the following extension method to be found in another class in the same namespace (MyProject.Util). using System.Collections.Specialized; namespace MyProject.Util { public static class Extensions { public static string Get( this NameValueCollection me, string key, string def ) { return me[key] ?? def; } } } As you can see it's basically another version of foo[bar] ?? baz, but I still don't understand why VS2008 fails to compile telling me that no version of Get takes two arguments. Any ideas?

  Read the article

• Google Bigtable-primarykey

  - by megala

  I know how to create table in google bigtable.My constriant is how to set primary key for my table using jpa.

  Read the article

• Parsing files with python

  - by iHeartDucks

  My input file is going to be something like this key "value" key "value" ... the above lines repeat What I do is read the file contents, populate an object with the data and return it. There are only a set number of keys that can be present in the file. Since I am a beginner in python, I feel that my code to read the file is not that good My code is something like this ObjInstance = CustomClass() fields = ['key1', 'key2', 'key3'] for field in fields: for line in f: if line.find(field) >= 0: if pgn_field == 'key1': objInstance.DataOne = get_value_using_re(line) elif pgn_field == 'key2': objInstance.DataTwo = get_value_using_re(line) return objInstance; The function "get_value_using_re" is very simple, it looks for a string in between the double quotes and returns it. I fear that I will have multiple if elif statements and I don't know if this is the right way or not. Am I doing the right thing here?

  Read the article

• Reading email content

  - by Steve

  Hi, Hope someone may be able to help. What i am looking to do is create a small winform app in c# to read the content of a email from a pop account, and upload key values to a sql automatically. The email format is always the same for each email, eg, First name : Last name : Phone number : etc... Currently the emails are being stored in a pop 3 account however i want a way to reduce having to key the information into the sql by hand. Can anyone advise how i would go about doing this or could recommend some guides? Thanks. Steve

  Read the article

• Differences between WPF Custom Control Library and plain Class Library?

  - by David Veeneman

  I posted a question a few months ago about sharing resource dictionaries across assemblies. It turns out you can do that using the Component Resource Key markup extension. At the time, I could only get it working with a WPF Custom Control project, not with a plain Class Library project. Now I need to use an existing plain Class Library project to host a shared resource dictionary. That means I need to retrofit the Class Library project to support the Component Resource Key markup extension. I have added a Themes folder and a Generic.xaml resource dictionary document to the Class Library project, as well as references to PresentationCore, PresentationFramework, and WindowsBase. Unfortunately, that doesn't seem to do the trick. So, here is my question: Other than the above, what does a WPF Custom Control Library project have that a plain Class Library project doesn't? Or, to put it another way, what else could I add to my class library project to get this feature working? Thanks.

  Read the article

• mysql GROUP_CONCAT

  - by user301766

  I want to list all users with their corropsonding user class. Here are simplified versions of my tables CREATE TABLE users ( user_id INT NOT NULL AUTO_INCREMENT, user_class VARCHAR(100), PRIMARY KEY (user_id) ); INSERT INTO users VALUES (1, '1'), (2, '2'), (3, '1,2'); CREATE TABLE classes ( class_id INT NOT NULL AUTO_INCREMENT, class_name VARCHAR(100), PRIMARY KEY (class_id) ); INSERT INTO classes VALUES (1, 'Class 1'), (2, 'Class 2'); And this is the query statement I am trying to use but is only returning the first matching user class and not a concatenated list as hoped. SELECT user_id, GROUP_CONCAT(DISTINCT class_name SEPARATOR ",") AS class_name FROM users, classes WHERE user_class IN (class_id) GROUP BY user_id; Actual Output +---------+------------+ | user_id | class_name | +---------+------------+ | 1 | Class 1 | | 2 | Class 2 | | 3 | Class 1 | +---------+------------+ Wanted Output +---------+---------------------+ | user_id | class_name | +---------+---------------------+ | 1 | Class 1 | | 2 | Class 2 | | 3 | Class 1, Class 2 | +---------+---------------------+ Thanks in advance

  Read the article

• My laptop hangs a lot

  - by Salahuddin

  My laptop is 1G ram and 120G hard-disk 1.68HZ processor , I've both Ubuntu and Windows7 on my machine For the last few days, my laptop, running Ubuntu 11.10 has been hanging a lot. A lot of the time, the touchpad won't work for unknown reasons, and I have to connect a USB mouse to be able to move the pointer on the screen. When browsing the web, the browser hangs a lot, and I have to restart the laptop to refresh it. I know that there is a hotkey to force Ubuntu to refresh when it hangs, but it doesn't work here.These problems happens only on ubuntu not on windows 7... How do I make Ubuntu light and fast? Help me, please.

  Read the article

• 12.10: How to hide bind mounts in nautilus?

  - by Bazon

  Summary: How do I remove folders mounted via bind or bindfs in /etc/fstab from appearing as devices in nautilus left column, the "places" view? detailed: Hello, I mount various directories from my data partition via bind in /etc/fstab in my home directory, eg like this: #using bind: /mnt/sda5/bazon/Musik /home/Bazon/Musik none bind,user 0 0 #or using bindfs bindfs#/mnt/sda5/tobi/Downloads /home/tobi/Downloads fuse user 0 0 (Background: /dev/sda5 mounted to /mnt/sda5 is my old home partition, but I do not want to mount it as a home partition, as I always have at least 2 Linuxes on the computer ...) That works well, but since 12.10 every one of those items is listed in Nautilus in the left column under "Devices". (Where normally USB drives appear, etc.) This is a waste of space (as I have many of such mounts...) and so I would like to have these mounts hidden, just as it was before in 12.04. How can I do that? Thanks!

  Read the article

• How do I shutdown 12.10 when ACPI is set to OFF?

  - by rahi

  I recently installed 12.04 on an HP Spectre XT ultrabook. I installed 12.04 from a USB. When the install was complete, and the computer restarted, I got a blank screen. After some searching, I found that I had to choose "acpi=off" during the installation, which now shows up in the grub screen. Once I was on 12.04, I upgraded to 12.10. The issue now is that when I hit shutdown, the computer hangs on a purple shutdown screen. Usually, at this point, I press the power button on the machine to completely power off the machine. I am new to ubuntu, and would appreciate the help. Thanks.

  Read the article

• GRUB is not Booting Correctly

  - by msknapp

  I have a PC with three hard disks. Windows 7 is installed on the first, Ubuntu 14.04 is installed on the third. After I re-booted, it went straight to Windows 7. So I tried explicitly telling my PC to boot using the third hard disk, but that just takes me to the grub rescue prompt. I followed Scott Severence's instructions here to try and recover. Essentially, I updated grub, reinstalled grub, and then updated it again. After re-booting, absolutely nothing had changed. So instead I tried using the boot-repair tool. In the past it had failed for me, saying that I had programs running and it could not unmount drives, when I was running nothing. I never figured out how to solve that problem, but it went away when I bought another hard drive and used that for my Ubuntu installation, I don't know why. In any case, I ran the boot-repair tool and this time it said it was successful. First time for everything right? I re-booted, only to be taken straight to the grub rescue prompt. So I changed my BIOS settings to use the third hard disk for boot start up. That is the same hard drive where I have Ubuntu and grub installed, and the same one that the grub-repair tool told me to use. It still took me straight to the grub rescue prompt. So I went from not being able to boot Ubuntu, to not being able to boot either OS installed on my system. Thanks boot-repair! Boot repair gave me this URL for future troubleshooting: http://paste.ubuntu.com/8131669 When I try to boot from the third hard disk, this is my console: Loading Operating System ... error: attempt to read or write outside of disk 'hd0'. Entering rescue mode... grub rescue> grub rescue> set cmdpath=(hd0) prefix=(hd0,gpt2)/boot/grub root=hd0,gpt2 grub rescue> ls (hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1) (hd1) (hd2) (hd2,gpt2) (hd2,gpt1) (hd3) Those values look correct to me. I have also experimented with changing some of those values, but 'insmod normal' always throws the same error. Somebody please tell me how to fix this. I have tried everything, reinstalling grub, and running boot-repair. =========================== Update: I think the problem might be that the ubuntu installer did not partition my hard disk correctly. I booted from live USB and then launched gparted and looked at how it partitioned things. This is what gparted says: Partition, File System, Size, Used, Unused, Flags /dev/sda1 (!), unknown, 1.00 MiB, ---, ---, bios_grub /dev/sda2, ext4, 2.71 TiB, 47.30 GiB, 2.67 TiB, /dev/sda3, linux-swap, 16.00 GiB, 0.00 B, 16.00 GiB, So that first line looks problematic. It is supposed to be the /boot partition. However, it was given only 1 MiB? I am assuming that MiB is actually supposed to mean megabyte, no idea why that 'i' is there. It also says the file system is unknown. I read the answer by andrew here, and he says he had to do a custom install, explicitly configuring the boot partition. So I think that maybe Ubuntu's installer has a bug in it, where it does not set up the boot partition correctly if you are not installing on the first hard disk in your computer. I am going to try reinstalling with a custom partition scheme. I read elsewhere (askubuntu won't let me post another link) that I don't even need a /boot partition any more. So instead of following Andrew's instructions ver batim, I'm first going to try having just two partitions: one for /, and another for my 16GB swap space. Both as primary partitions. The first will be formatted as ext4. If that doesn't work, I may try again using /boot. ======================== So I did my custom install with no /boot partition, and it did not work. When I rebooted, I had an error message saying that some address did not exist. So for the hundredth time, I booted from the live USB, and ran boot-repair. Now I get this message GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. I feel like I'm running in circles and nobody will help me.

  Read the article

• Counting down to zero in contrast to counting up to length - 1

  - by Helper Method

  Is it recommended to count in small loops (where possible) down from length - 1 to zero instead of counting up to length - 1? 1.) Counting down for (int i = a.length - 1; i >= 0; i--) { if (a[i] == key) return i; } 2.) Counting up for (int i = 0; i < a.length; i++) { if (a[i] == key) return i; } The first one is slightly faster that the second one (because comparing to zero is faster) but is a little more error-prone in my opinion. Besides, the first one could maybe not be optimized by future improvements of the JVM. Any ideas on that?

  Read the article

• Arrays in database tables and normalization

  - by Ivan Petrov

  Hi! Is it smart to keep arrays in table columns? More precisely I am thinking of the following schema which to my understanding violates normalization: create table Permissions( GroupID int not null default(-1), CategoryID int not null default(-1), Permissions varchar(max) not null default(''), constraint PK_GroupCategory primary key clustered(GroupID,CategoryID) ); and this: create table Permissions( GroupID int not null default(-1), CategoryID int not null default(-1), PermissionID int not null default(-1), constraint PK_GroupCategory primary key clustered(GroupID,CategoryID) ); UPD: Forgot to mention, in the scope of this concrete question we will consider that the "fetch rows that have permission X" won't be performed, instead all the lookups will be made by GroupID and CategoryID only Thoughts? Thanks in advance!

  Read the article

• Restoring a hard drive

  - by Indian

  I had a laptop on which there was an AMD X2 display card. Suddenly this laptop went kaput. Incidentally the hard drive was safe. I had checked it using another machine. Further, I got this hard drive covered using an external USB HDD case. One day, while sleeping, this case fell down and since then I have not been able to restore the contents of the Hard Drive (rather could not find tools to recover contents from the hard drive). This hard drive had three partitions (a) NTFS (b) Linux (either ext4 or ReiserFS; I do not remember which one I had formatted in); and (c) Swap. How do I recover my contents?

  Read the article

• How to access data from another datatemplate in wpf ?

  - by Anish

  <ObjectDataProvider x:Key="Datas" ObjectType="{x:Type ViewModel:UserControlViewModel}"></ObjectDataProvider>

  Read the article

• Records in a file

  - by Phenom

  Why does a record need both a primary key and an RRN?

  Read the article

• ubuntu 11.10 CellC data card

  - by Armien

  In 11.10 I find that I can connect to the internet via broadband connection successfully. The problem is that I cannot have the data card attached to the machine while the machine boots up. If I leave the data card in the machine during startup, the data card is not picked up and I then cannot connect to the internet. I must first boot up my machine, login, attach the data card into the usb port, wait so 30 seconds. The broadband connection name will then appear in the network dropdown at the top of the screen. An internet connect is now possible via broadband. Please let me know what must be done to fix this. Thanks Armien

  Read the article

• Formatting Log File Messages

  - by Kumar

  This is about formatting the messages for logging so as to subsequently be able to parse them relatively easily esp. given the extensive logging required in financial apps Typically a line in the log file is of the form TimeStamp: Module/Function: where the log string contains whatever you choose, typically you'd have some key=value paradigm or even johnny5 key {value} etc. A regex search through the log file might easily pick up Module/Function but enforcing and maintaing consistency on the log string itself for every developer on the team is often a pain The logging api's are typically ILog.LogInfo(string text, params object[] args) ILog.LogWarning(string text, params object[] args) ILog.LogError(string text, params object[] args) Looking for opinions on better logging api's to format the log messages where a regex search can be performed for Module/Function = Basket/AddItem TokenA = Value1 and TokenB = Value2 etc. without going over every developer's every logging call

  Read the article

• How to install my current Ubuntu based OS on to an external drive? [closed]

  - by Godel Fishbreath

  Possible Duplicate: How do I install Ubuntu to a USB key? How to copy an Ubuntu install from one laptop to another I have found urls to install ubuntu to a HD. But my current system has been upgraded and updated so often that it does not resemble anything on the web or on my drive disks. So giving my a url to how to install ubuntu will fail. Give me instead 'how to install my current Linux/Ubuntu based system (11.04) and all the upgrades to my external HD. Or alternately how to back up the OS into a bootable external HD. I am looking for either urls or a very complete explanation.

  Read the article

• How does "rm" on a NTFS filesystem differs from Window's own implementation?

  - by DavideRossi

  I have an external USB disk with an NTFS filesystem on it. If I remove a file from Windows and I run one of the several "undelete" utilities (say, TestDisk) I can easily recover the file (because "it's still there but it's marked as deleted"). If I remove the file from Linux no utility (unless I use a deep-search signature-based one) can recover the file. Why? How is unlink implemented in Linux's NTFS file system code? It looks like it does not just "mark it as undeleted" but it wipes away some on-disk structure, is this the case?

  Read the article

• Classes to Entities; Like-class inheritence problems

  - by Stacey

  Beyond work, some friends and I are trying to build a game of sorts; The way we structure some of it works pretty well for a normal object oriented approach, but as most developers will attest this does not always translate itself well into a database persistent approach. This is not the absolute layout of what we have, it is just a sample model given for sake of representation. The whole project is being done in C# 4.0, and we have every intention of using Entity Framework 4.0 (unless Fluent nHibernate can really offer us something we outright cannot do in EF). One of the problems we keep running across is inheriting things in database models. Using the Entity Framework designer, I can draw the same code I have below; but I'm sure it is pretty obvious that it doesn't work like it is expected to. To clarify a little bit; 'Items' have bonuses, which can be of anything. Therefore, every part of the game must derive from something similar so that no matter what is 'changed' it is all at a basic enough level to be hooked into. Sounds fairly simple and straightforward, right? So then, we inherit everything that pertains to the game from 'Unit'. Weights, Measures, Random (think like dice, maybe?), and there will be other such entities. Some of them are similar, but in code they will each react differently. We're having a really big problem with abstracting this kind of thing into a database model. Without 'Enum' support, it is proving difficult to translate into multiple tables that still share a common listing. One solution we've depicted is to use a 'key ring' type approach, where everything that attaches to a character is stored on a 'Ring' with a 'Key', where each Key has a Value that represents a type. This works functionally but we've discovered it becomes very sluggish and performs poorly. We also dislike this approach because it begins to feel as if everything is 'dumped' into one class; which makes management and logical structure difficult to adhere to. I was hoping someone else might have some ideas on what I could do with this problem. It's really driving me up the wall; To summarize; the goal is to build a type (Unit) that can be used as a base type (Table per Type) for generic reference across a relatively global scope, without having to dump everything into a single collection. I can use an Interface to determine actual behavior so that isn't too big of an issue. This is 'roughly' the same idea expressed in the Entity Framework.

  Read the article

< Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >