Search Results

Search found 11644 results on 466 pages for 'column defaults'.

Page 437/466 | < Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >

• When row estimation goes wrong

  - by Dave Ballantyne

  Whilst working at a client site, I hit upon one of those issues that you are not sure if that this is something entirely new or a bug or a gap in your knowledge. The client had a large query that needed optimizing.  The query itself looked pretty good, no udfs, UNION ALL were used rather than UNION, most of the predicates were sargable other than one or two minor ones.  There were a few extra joins that could be eradicated and having fixed up the query I then started to dive into the plan. I could see all manor of spills in the hash joins and the sort operations,  these are caused when SQL Server has not reserved enough memory and has to write to tempdb.  A VERY expensive operation that is generally avoidable.  These, however, are a symptom of a bad row estimation somewhere else, and when that bad estimation is combined with other estimation errors, chaos can ensue. Working my way back down the plan, I found the cause, and the more I thought about it the more i came convinced that the optimizer could be making a much more intelligent choice. First step is to reproduce and I was able to simplify the query down a single join between two tables, Product and ProductStatus,  from a business point of view, quite fundamental, find the status of particular products to show if ‘active’ ,’inactive’ or whatever. The query itself couldn’t be any simpler The estimated plan looked like this: Ignore the “!” warning which is a missing index, but notice that Products has 27,984 rows and the join outputs 14,000. The actual plan shows how bad that estimation of 14,000 is : So every row in Products has a corresponding row in ProductStatus.  This is unsurprising, in fact it is guaranteed,  there is a trusted FK relationship between the two columns.  There is no way that the actual output of the join can be different from the input. The optimizer is already partly aware of the foreign key meta data, and that can be seen in the simplifiction stage. If we drop the Description column from the query: the join to ProductStatus is optimized out. It serves no purpose to the query, there is no data required from the table and the optimizer knows that the FK will guarantee that a matching row will exist so it has been removed. Surely the same should be applied to the row estimations in the initial example, right ?  If you think so, please upvote this connect item. So what are our options in fixing this error ? Simply changing the join to a left join will cause the optimizer to think that we could allow the rows not to exist. or a subselect would also work However, this is a client site, Im not able to change each and every query where this join takes place but there is a more global switch that will fix this error,  TraceFlag 2301. This is described as, perhaps loosely, “Enable advanced decision support optimizations”. We can test this on the original query in isolation by using the “QueryTraceOn” option and lo and behold our estimated plan now has the ‘correct’ estimation. Many thanks goes to Paul White (b|t) for his help and keeping me sane through this

  Read the article

• Editing files without race conditions?

  - by user2569445

  I have a CSV file that needs to be edited by multiple processes at the same time. My question is, how can I do this without introducing race conditions? It's easy to write to the end of the file without race conditions by open(2)ing it in "a" (O_APPEND) mode and simply write to it. Things get more difficult when removing lines from the file. The easiest solution is to read the file into memory, make changes to it, and overwrite it back to the file. If another process writes to it after it is in memory, however, that new data will be lost upon overwriting. To further complicate matters, my platform does not support POSIX record locks, checking for file existence is a race condition waiting to happen, rename(2) replaces the destination file if it exists instead of failing, and editing files in-place leaves empty bytes in it unless the remaining bytes are shifted towards the beginning of the file. My idea for removing a line is this (in pseudocode): filename = "/home/user/somefile"; file = open(filename, "r"); tmp = open(filename+".tmp", "ax") || die("could not create tmp file"); //"a" is O_APPEND, "x" is O_EXCL|O_CREAT while(write(tmp, read(file)); //copy the $file to $file+".new" close(file); //edit tmp file unlink(filename) || die("could not unlink file"); file = open(filename, "wx") || die("another process must have written to the file after we copied it."); //"w" is overwrite, "x" is force file creation while(write(file, read(tmp))); //copy ".tmp" back to the original file unlink(filename+".tmp") || die("could not unlink tmp file"); Or would I be better off with a simple lock file? Appender process: lock = open(filename+".lock", "wx") || die("could not lock file"); file = open(filename, "a"); write(file, "stuff"); close(file); close(lock); unlink(filename+".lock"); Editor process: lock = open(filename+".lock", "wx") || die("could not lock file"); file = open(filename, "rw"); while(contents += read(file)); //edit "contents" write(file, contents); close(file); close(lock); unlink(filename+".lock"); Both of these rely on an additional file that will be left over if a process terminates before unlinking it, causing other processes to refuse to write to the original file. In my opinion, these problems are brought on by the fact that the OS allows multiple writable file descriptors to be opened on the same file at the same time, instead of failing if a writable file descriptor is already open. It seems that O_CREAT|O_EXCL is the closest thing to a real solution for preventing filesystem race conditions, aside from POSIX record locks. Another possible solution is to separate the file into multiple files and directories, so that more granular control can be gained over components (lines, fields) of the file using O_CREAT|O_EXCL. For example, "file/$id/$field" would contain the value of column $field of the line $id. It wouldn't be a CSV file anymore, but it might just work. Yes, I know I should be using a database for this as databases are built to handle these types of problems, but the program is relatively simple and I was hoping to avoid the overhead. So, would any of these patterns work? Is there a better way? Any insight into these kinds of problems would be appreciated.

  Read the article

• mysql: Bind on unix socket: Permission denied

  - by Alex

  Can't start mysql with: sudo /usr/bin/mysqld_safe --datadir=/srv/mysql/myDB --log-error=/srv/mysql/logs/mysqld-myDB.log --pid-file=/srv/mysql/pids/mysqld-myDB.pid --user=mysql --socket=/srv/mysql/sockets/mysql-myDB.sock --port=3700 120222 13:40:48 mysqld_safe Starting mysqld daemon with databases from /srv/mysql/myDB 120222 13:40:54 mysqld_safe mysqld from pid file /srv/mysql/pids/mysqld-myDB.pid ended /srv/mysql/logs/mysqld-myDB.log: 120222 13:43:53 mysqld_safe Starting mysqld daemon with databases from /srv/mysql/myDB 120222 13:43:53 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld: Table 'plugin' is read only 120222 13:43:53 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 120222 13:43:53 InnoDB: Completed initialization of buffer pool 120222 13:43:53 InnoDB: Started; log sequence number 32 4232720908 120222 13:43:53 [ERROR] Can't start server : Bind on unix socket: Permission denied 120222 13:43:53 [ERROR] Do you already have another mysqld server running on socket: /srv/mysql/sockets/mysql-myDB.sock ? 120222 13:43:53 [ERROR] Aborting 120222 13:43:53 InnoDB: Starting shutdown... One instance mysqld is running: $ ps aux | grep mysql mysql 1093 0.0 0.2 169972 18700 ? Ssl 11:50 0:02 /usr/sbin/mysqld $ Port 3700 is available: $ netstat -a | grep 3700 $ Directory with sockets is empty: $ ls /srv/mysql/sockets/ $ There are all permissions: $ ls -l /srv/mysql/ total 20 drwxrwxrwx 2 mysql mysql 4096 2012-02-22 13:28 logs drwxrwxrwx 13 mysql mysql 4096 2012-02-22 13:44 myDB drwxrwxrwx 2 mysql mysql 4096 2012-02-22 12:55 pids drwxrwxrwx 2 mysql mysql 4096 2012-02-22 12:55 sockets drwxrwxrwx 2 mysql mysql 4096 2012-02-22 13:25 version Apparmor config: $cat /etc/apparmor.d/usr.sbin.mysqld # vim:syntax=apparmor # Last Modified: Tue Jun 19 17:37:30 2007 #include <tunables/global> /usr/sbin/mysqld flags=(complain) { #include <abstractions/base> #include <abstractions/nameservice> #include <abstractions/user-tmp> #include <abstractions/mysql> #include <abstractions/winbind> capability dac_override, capability sys_resource, capability setgid, capability setuid, network tcp, /etc/hosts.allow r, /etc/hosts.deny r, /etc/mysql/*.pem r, /etc/mysql/conf.d/ r, /etc/mysql/conf.d/* r, /etc/mysql/*.cnf r, /usr/lib/mysql/plugin/ r, /usr/lib/mysql/plugin/*.so* mr, /usr/sbin/mysqld mr, /usr/share/mysql/** r, /var/log/mysql.log rw, /var/log/mysql.err rw, /var/lib/mysql/ r, /var/lib/mysql/** rwk, /var/log/mysql/ r, /var/log/mysql/* rw, /{,var/}run/mysqld/mysqld.pid w, /{,var/}run/mysqld/mysqld.sock w, /srv/mysql/ r, /srv/mysql/** rwk, /sys/devices/system/cpu/ r, # Site-specific additions and overrides. See local/README for details. #include <local/usr.sbin.mysqld> } Any suggestions? UPD1: $ touch /srv/mysql/sockets/mysql-myDB.sock $ sudo chown mysql:mysql /srv/mysql/sockets/mysql-myDB.sock $ ls -l /srv/mysql/sockets/mysql-myDB.sock -rw-rw-r-- 1 mysql mysql 0 2012-02-22 14:29 /srv/mysql/sockets/mysql-myDB.sock $ sudo /usr/bin/mysqld_safe --datadir=/srv/mysql/myDB --log-error=/srv/mysql/logs/mysqld-myDB.log --pid-file=/srv/mysql/pids/mysqld-myDB.pid --user=mysql --socket=/srv/mysql/sockets/mysql-myDB.sock --port=3700 120222 14:30:18 mysqld_safe Can't log to error log and syslog at the same time. Remove all --log-error configuration options for --syslog to take effect. 120222 14:30:18 mysqld_safe Logging to '/srv/mysql/logs/mysqld-myDB.log'. 120222 14:30:18 mysqld_safe Starting mysqld daemon with databases from /srv/mysqlmyDB 120222 14:30:24 mysqld_safe mysqld from pid file /srv/mysql/pids/mysqld-myDB.pid ended $ ls -l /srv/mysql/sockets/mysql-myDB.sock ls: cannot access /srv/mysql/sockets/mysql-myDB.sock: No such file or directory $ UPD2: $ sudo netstat -lnp | grep mysql tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 1093/mysqld unix 2 [ ACC ] STREAM LISTENING 5912 1093/mysqld /var/run/mysqld/mysqld.sock $ sudo lsof | grep /srv/mysql/sockets/mysql-myDB.sock lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/sears/.gvfs Output information may be incomplete. UPD3: $ cat /etc/mysql/my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• l2tp / ipsec debian Openswan U2.6.38 does not connect

  - by locojay

  i am trying to get ipsec/l2tp running on a debian server with an iphone as a client but always get: Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [RFC 3947] method set to=115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: ignoring Vendor ID payload [FRAGMENTATION 80000000] Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [Dead Peer Detection] Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: responding to Main Mode from unknown peer <clientip> Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R1: sent MR1, expecting MI2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R2: sent MR2, expecting MI3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: Main mode peer ID is ID_IPV4_ADDR: '10.2.210.176' Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: switched from "L2TP-PSK-noNAT" to "L2TP-PSK-noNAT" Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: new NAT mapping for #20, was <clientip>:43598, now <clientip>:49826 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: the peer proposed: <public ip>/32:17/1701 -> 10.2.210.176/32:17/0 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: responding to Quick Mode proposal {msgid:311d3282} Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: us: 171.138.2.13<171.138.2.13>:17/1701 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: them: <clientip>[10.2.210.176]:17/61719 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x05e23c9a <0x216077a9 xfrm=AES_256-HMAC_SHA1 NATOA=10.2.210.176 NATD=<clientip>:49826 DPD=enabled} Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA(0x05e23c9a) payload: deleting IPSEC State #21 Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA payload: deleting ISAKMP State #20 Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip>: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:27 vpn pluto[22711]: packet from <clientip>:49826: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: ERROR: asynchronous network error report on eth0 (sport=4500) for message to <clientip> port 49826, complainant <clientip>: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] my setup looks like this verizon fios actiontec -- DMZ-- ddwrt router -- debian xen instance actiontec : 192.168.1.1 ddwrt: 171.138.2.1 debian xen server: 171.138.2.13 forwarded udp 500, 4500, 1701 on ddwrt to debian xen instance. vpn passthrough is enabled /etc/ipsec.conf config setup dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10,%v4:!171.138.2.0/24,%v4:!192.168.1.0/24 protostack=netkey # Add connections here conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Apple iOS doesn't send delete notify so we need dead peer detection # to detect vanishing clients dpddelay=30 dpdtimeout=120 dpdaction=clear # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=171.138.2.13 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "%any" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port. rightprotoport=17/%any #force all to be nat'ed. because of ios conn passthrough-for-non-l2tp type=passthrough left=171.138.2.13 leftnexthop=171.138.2.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/xl2tp/xl2tp.conf [global] ipsec saref = no listen-addr = 171.138.2.13 ;port = 1701 ;debug network = yes ;debug tunnel = yes ;debug network = yes ;debug packet = yes [lns default] ip range = 171.138.2.231-171.138.2.239 local ip = 171.138.2.13 assign ip = yes require chap = no refuse pap = no require authentication = no ;name = OpenswanVPN ppp debug = yes pppoptfile = /etc/ppp/options.xlt2tpd lenght bit = yes /etc/ppp/options.xl2tpd ;require-mschap-v2 pcp-accept-local ipcp-accept-local ipcp-accept-remote ;ms-dns 171.138.2.1 ms-dns 192.168.1.1 ms-dns 8.8.8.8 name l2tpd noccp auth crtscts idle 1800 mtu 1410 mru 1410 lock proxyarp connect-delay 5000 debug dump logfd 2 logfile /var/log/xl2tpd.log ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.0.0-1-amd64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Two or more interfaces found, checking IP forwarding [FAILED] Checking NAT and MASQUERADEing [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] The failed can be ignored i guess since cat /proc/sys/net/ipv4/ip_forward returns 1 any help would be much appreciated as i don't have any idea why this is not working

  Read the article

• nagios NRPE: Unable to read output

  - by user555854

  I currently set up a script to restart my http servers + php5 fpm but can't get it to work. I have googled and have found that mostly permissions are the problems of my error but can't figure it out. I start my script using /usr/lib/nagios/plugins/check_nrpe -H bart -c restart_http This is the output in my syslog on the node I want to restart Jun 27 06:29:35 bart nrpe[8926]: Connection from 192.168.133.17 port 25028 Jun 27 06:29:35 bart nrpe[8926]: Host address is in allowed_hosts Jun 27 06:29:35 bart nrpe[8926]: Handling the connection... Jun 27 06:29:35 bart nrpe[8926]: Host is asking for command 'restart_http' to be run... Jun 27 06:29:35 bart nrpe[8926]: Running command: /usr/bin/sudo /usr/lib/nagios/plugins/http-restart Jun 27 06:29:35 bart nrpe[8926]: Command completed with return code 1 and output: Jun 27 06:29:35 bart nrpe[8926]: Return Code: 1, Output: NRPE: Unable to read output Jun 27 06:29:35 bart nrpe[8926]: Connection from 192.168.133.17 closed. If I run the command myself it runs fine (but asks for a password) (nagios user) This are the script permission and the script contents. -rwxrwxrwx 1 nagios nagios 142 Jun 26 21:41 /usr/lib/nagios/plugins/http-restart #!/bin/bash echo "ok" /etc/init.d/nginx stop /etc/init.d/nginx start /etc/init.d/php5-fpm stop /etc/init.d/php5-fpm start echo "done" I also added this line to visudo nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/ My local nagios nrpe.cfg ############################################################################# # Sample NRPE Config File # Written by: Ethan Galstad ([email protected]) # # # NOTES: # This is a sample configuration file for the NRPE daemon. It needs to be # located on the remote host that is running the NRPE daemon, not the host # from which the check_nrpe client is being executed. ############################################################################# # LOG FACILITY # The syslog facility that should be used for logging purposes. log_facility=daemon # PID FILE # The name of the file in which the NRPE daemon should write it's process ID # number. The file is only written if the NRPE daemon is started by the root # user and is running in standalone mode. pid_file=/var/run/nagios/nrpe.pid # PORT NUMBER # Port number we should wait for connections on. # NOTE: This must be a non-priviledged port (i.e. > 1024). # NOTE: This option is ignored if NRPE is running under either inetd or xinetd server_port=5666 # SERVER ADDRESS # Address that nrpe should bind to in case there are more than one interface # and you do not want nrpe to bind on all interfaces. # NOTE: This option is ignored if NRPE is running under either inetd or xinetd #server_address=127.0.0.1 # NRPE USER # This determines the effective user that the NRPE daemon should run as. # You can either supply a username or a UID. # # NOTE: This option is ignored if NRPE is running under either inetd or xinetd nrpe_user=nagios # NRPE GROUP # This determines the effective group that the NRPE daemon should run as. # You can either supply a group name or a GID. # # NOTE: This option is ignored if NRPE is running under either inetd or xinetd nrpe_group=nagios # ALLOWED HOST ADDRESSES # This is an optional comma-delimited list of IP address or hostnames # that are allowed to talk to the NRPE daemon. # # Note: The daemon only does rudimentary checking of the client's IP # address. I would highly recommend adding entries in your /etc/hosts.allow # file to allow only the specified host to connect to the port # you are running this daemon on. # # NOTE: This option is ignored if NRPE is running under either inetd or xinetd allowed_hosts=127.0.0.1,192.168.133.17 # COMMAND ARGUMENT PROCESSING # This option determines whether or not the NRPE daemon will allow clients # to specify arguments to commands that are executed. This option only works # if the daemon was configured with the --enable-command-args configure script # option. # # *** ENABLING THIS OPTION IS A SECURITY RISK! *** # Read the SECURITY file for information on some of the security implications # of enabling this variable. # # Values: 0=do not allow arguments, 1=allow command arguments dont_blame_nrpe=0 # COMMAND PREFIX # This option allows you to prefix all commands with a user-defined string. # A space is automatically added between the specified prefix string and the # command line from the command definition. # # *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! *** # Usage scenario: # Execute restricted commmands using sudo. For this to work, you need to add # the nagios user to your /etc/sudoers. An example entry for alllowing # execution of the plugins from might be: # # nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/ # # This lets the nagios user run all commands in that directory (and only them) # without asking for a password. If you do this, make sure you don't give # random users write access to that directory or its contents! command_prefix=/usr/bin/sudo # DEBUGGING OPTION # This option determines whether or not debugging messages are logged to the # syslog facility. # Values: 0=debugging off, 1=debugging on debug=1 # COMMAND TIMEOUT # This specifies the maximum number of seconds that the NRPE daemon will # allow plugins to finish executing before killing them off. command_timeout=60 # CONNECTION TIMEOUT # This specifies the maximum number of seconds that the NRPE daemon will # wait for a connection to be established before exiting. This is sometimes # seen where a network problem stops the SSL being established even though # all network sessions are connected. This causes the nrpe daemons to # accumulate, eating system resources. Do not set this too low. connection_timeout=300 # WEEK RANDOM SEED OPTION # This directive allows you to use SSL even if your system does not have # a /dev/random or /dev/urandom (on purpose or because the necessary patches # were not applied). The random number generator will be seeded from a file # which is either a file pointed to by the environment valiable $RANDFILE # or $HOME/.rnd. If neither exists, the pseudo random number generator will # be initialized and a warning will be issued. # Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness #allow_weak_random_seed=1 # INCLUDE CONFIG FILE # This directive allows you to include definitions from an external config file. #include=<somefile.cfg> # INCLUDE CONFIG DIRECTORY # This directive allows you to include definitions from config files (with a # .cfg extension) in one or more directories (with recursion). #include_dir=<somedirectory> #include_dir=<someotherdirectory> # COMMAND DEFINITIONS # Command definitions that this daemon will run. Definitions # are in the following format: # # command[<command_name>]=<command_line> # # When the daemon receives a request to return the results of <command_name> # it will execute the command specified by the <command_line> argument. # # Unlike Nagios, the command line cannot contain macros - it must be # typed exactly as it should be executed. # # Note: Any plugins that are used in the command lines must reside # on the machine that this daemon is running on! The examples below # assume that you have plugins installed in a /usr/local/nagios/libexec # directory. Also note that you will have to modify the definitions below # to match the argument format the plugins expect. Remember, these are # examples only! # The following examples use hardcoded command arguments... command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10 command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 command[check_hda1]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1 command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 # The following examples allow user-supplied arguments and can # only be used if the NRPE daemon was compiled with support for # command arguments *AND* the dont_blame_nrpe directive in this # config file is set to '1'. This poses a potential security risk, so # make sure you read the SECURITY file before doing this. #command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$ #command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$ #command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ #command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$ command[restart_http]=/usr/lib/nagios/plugins/http-restart # # local configuration: # if you'd prefer, you can instead place directives here include=/etc/nagios/nrpe_local.cfg # # you can place your config snipplets into nrpe.d/ include_dir=/etc/nagios/nrpe.d/ My Sudoers files # /etc/sudoers # # This file MUST be edited with the 'visudo' command as root. # # See the man page for details on how to write a sudoers file. # Defaults env_reset # Host alias specification # User alias specification # Cmnd alias specification # User privilege specification root ALL=(ALL) ALL nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/ # Allow members of group sudo to execute any command # (Note that later entries override this, so you might need to move # it further down) %sudo ALL=(ALL) ALL # #includedir /etc/sudoers.d Hopefully someone can help!

  Read the article

• Building Awesome WM

  - by Dragan Chupacabrovic

  Hello, I am following these steps in order to build Awesome window manager on 10.04 I am building 3.4 while the tutorial is for 3.1 I installed all of the specified dependencies including cairo. EDIT I ran: sudo apt-get install libxcb-xtest0-dev libxcb-property1-dev libxdg-basedir-dev libstartup-notification0-dev and now it looks like I'm missing a library Please advise: awesome-3.4$ make Running cmake… -- cat - /bin/cat -- ln - /bin/ln -- grep - /bin/grep -- git - /usr/bin/git -- hostname - /bin/hostname -- gperf - /usr/bin/gperf -- asciidoc - /usr/bin/asciidoc -- xmlto - /usr/bin/xmlto -- gzip - /bin/gzip -- lua - /usr/bin/lua -- luadoc - /usr/bin/luadoc -- convert - /usr/bin/convert -- Configuring lib/naughty.lua -- Configuring lib/awful/tooltip.lua -- Configuring lib/awful/init.lua -- Configuring lib/awful/titlebar.lua -- Configuring lib/awful/key.lua -- Configuring lib/awful/mouse/init.lua -- Configuring lib/awful/mouse/finder.lua -- Configuring lib/awful/autofocus.lua -- Configuring lib/awful/screen.lua -- Configuring lib/awful/rules.lua -- Configuring lib/awful/widget/init.lua -- Configuring lib/awful/widget/taglist.lua -- Configuring lib/awful/widget/graph.lua -- Configuring lib/awful/widget/tasklist.lua -- Configuring lib/awful/widget/common.lua -- Configuring lib/awful/widget/prompt.lua -- Configuring lib/awful/widget/launcher.lua -- Configuring lib/awful/widget/button.lua -- Configuring lib/awful/widget/layoutbox.lua -- Configuring lib/awful/widget/layout/init.lua -- Configuring lib/awful/widget/layout/vertical.lua -- Configuring lib/awful/widget/layout/horizontal.lua -- Configuring lib/awful/widget/layout/default.lua -- Configuring lib/awful/widget/progressbar.lua -- Configuring lib/awful/widget/textclock.lua -- Configuring lib/awful/dbus.lua -- Configuring lib/awful/remote.lua -- Configuring lib/awful/client.lua -- Configuring lib/awful/prompt.lua -- Configuring lib/awful/completion.lua -- Configuring lib/awful/tag.lua -- Configuring lib/awful/util.lua -- Configuring lib/awful/button.lua -- Configuring lib/awful/menu.lua -- Configuring lib/awful/hooks.lua -- Configuring lib/awful/wibox.lua -- Configuring lib/awful/layout/init.lua -- Configuring lib/awful/layout/suit/init.lua -- Configuring lib/awful/layout/suit/floating.lua -- Configuring lib/awful/layout/suit/fair.lua -- Configuring lib/awful/layout/suit/spiral.lua -- Configuring lib/awful/layout/suit/magnifier.lua -- Configuring lib/awful/layout/suit/tile.lua -- Configuring lib/awful/layout/suit/max.lua -- Configuring lib/awful/placement.lua -- Configuring lib/awful/startup_notification.lua -- Configuring lib/beautiful.lua -- Configuring themes/zenburn//theme.lua -- Configuring themes/default//theme.lua -- Configuring themes/sky//theme.lua -- Configuring config.h -- Configuring awesomerc.lua -- Configuring awesome-version-internal.h -- Configuring awesome.doxygen -- Configuring done -- Generating done -- Build files have been written to: /home/druden/util/awesome-3.4/.build-vedroid-i486-linux-gnu-4.4.3 Running make Makefile… Building… [ 4%] Built target generated_sources [ 5%] Building C object CMakeFiles/awesome.dir/awesome.c.o In file included from /home/druden/util/awesome-3.4/spawn.h:25, from /home/druden/util/awesome-3.4/awesome.c:33: /home/druden/util/awesome-3.4/globalconf.h:57: error: expected specifier-qualifier-list before ‘xcb_event_handlers_t’ In file included from /home/druden/util/awesome-3.4/awesome.c:34: /home/druden/util/awesome-3.4/client.h: In function ‘client_stack’: /home/druden/util/awesome-3.4/client.h:212: error: ‘awesome_t’ has no member named ‘client_need_stack_refresh’ /home/druden/util/awesome-3.4/client.h: In function ‘client_raise’: /home/druden/util/awesome-3.4/client.h:227: error: ‘awesome_t’ has no member named ‘stack’ In file included from /home/druden/util/awesome-3.4/awesome.c:42: /home/druden/util/awesome-3.4/titlebar.h: In function ‘titlebar_update_geometry’: /home/druden/util/awesome-3.4/titlebar.h:150: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:151: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:152: error: ‘awesome_t’ has no member named ‘L’ In file included from /home/druden/util/awesome-3.4/awesome.c:47: /home/druden/util/awesome-3.4/common/xutil.h: In function ‘xutil_get_text_property_from_reply’: /home/druden/util/awesome-3.4/common/xutil.h:39: warning: ‘STRING’ is deprecated (declared at /usr/local/include/xcb/xcb_atom.h:83) /home/druden/util/awesome-3.4/common/xutil.h: At top level: /home/druden/util/awesome-3.4/common/xutil.h:60: error: expected ‘)’ before ‘*’ token /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_atexit’: /home/druden/util/awesome-3.4/awesome.c:65: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:68: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:73: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:76: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:77: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: warning: type defaults to ‘int’ in declaration of ‘c’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:91: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:92: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:96: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c: In function ‘a_xcb_check_cb’: /home/druden/util/awesome-3.4/awesome.c:223: warning: implicit declaration of function ‘xcb_event_handle’ /home/druden/util/awesome-3.4/awesome.c:223: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:230: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_restart’: /home/druden/util/awesome-3.4/awesome.c:277: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c: In function ‘xerror’: /home/druden/util/awesome-3.4/awesome.c:305: error: ‘XCB_EVENT_ERROR_BAD_WINDOW’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:305: error: (Each undeclared identifier is reported only once /home/druden/util/awesome-3.4/awesome.c:305: error: for each function it appears in.) /home/druden/util/awesome-3.4/awesome.c:306: error: ‘XCB_EVENT_ERROR_BAD_MATCH’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:308: error: ‘XCB_EVENT_ERROR_BAD_VALUE’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c: In function ‘main’: /home/druden/util/awesome-3.4/awesome.c:369: error: ‘awesome_t’ has no member named ‘keygrabber’ /home/druden/util/awesome-3.4/awesome.c:370: error: ‘awesome_t’ has no member named ‘mousegrabber’ /home/druden/util/awesome-3.4/awesome.c:376: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:377: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:381: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:382: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:424: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:431: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:432: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:433: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:434: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:435: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:436: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:443: error: ‘awesome_t’ has no member named ‘default_screen’ /home/druden/util/awesome-3.4/awesome.c:450: error: ‘awesome_t’ has no member named ‘have_xtest’ /home/druden/util/awesome-3.4/awesome.c:462: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:464: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:465: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:467: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:468: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:471: warning: implicit declaration of function ‘xcb_event_handlers_init’ /home/druden/util/awesome-3.4/awesome.c:471: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:472: warning: implicit declaration of function ‘xutil_error_handler_catch_all_set’ /home/druden/util/awesome-3.4/awesome.c:472: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:490: warning: implicit declaration of function ‘xcb_event_poll_for_event_loop’ /home/druden/util/awesome-3.4/awesome.c:490: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:493: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:496: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:507: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:510: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:513: error: ‘awesome_t’ has no member named ‘font’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘numlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘shiftlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘capslockmask’ /home/druden/util/awesome-3.4/awesome.c:521: error: ‘awesome_t’ has no member named ‘modeswitchmask’ /home/druden/util/awesome-3.4/awesome.c:563: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:572: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:575: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:576: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:577: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:578: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:579: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:580: error: ‘awesome_t’ has no member named ‘loop’ make[3]: * [CMakeFiles/awesome.dir/awesome.c.o] Error 1 make[2]: [CMakeFiles/awesome.dir/all] Error 2 make[1]: [all] Error 2 make: * [cmake-build] Error 2

  Read the article

• Prevent Windows 7 User Accounts from accessing files in other User Accounts

  - by Mantis

  I'm trying to set up another User Account on my Windows 7 Professional laptop for use by another person. I do not want that person to have access to any of the files in my User Account on the same machine. This machine has a single hard disk formatted with NTFS. User accounts data is stored in the default location, C:\Users. I use the computer with a Standard Account (not an Administrator). Let's call my user account "User A." I have given the new user a Standard Account. Let's call the new user's account "User B." To be clear, I want User B to have the ability to log in to her account, to use the computer, but to be unable to access any of the files in the User A account on the same machine. Currently, User B cannot use Windows Explorer to navigate to the location C:\Users\User A. However, by simply using Windows Search, User B can easily find and open documents saved in C:\Users\User A\Documents. After opening a document, that document's full path appears in "Recent Places" in Windows Explorer, and the document appears as a file that can be opened using the "Recent" feature in Word 2010. This is not the desired behavior. User B should not have the ability to see any documents using Windows Search or anything else. I have attempted to set permissions using the following procedure. Using an Administrator account, navigate to C:\Users and right-click on the "User A" folder. Select "Properties." In the "User A Properties" window that appears, click the "Security" tab. Click the "Edit..." button to change permissions. IN the "Permissions for User B" window that appears, under "Group or User Names," select User B. Under "Permissions for User B", check the box under the "Deny" column for the "Full Control" row. Ensure that the "Deny" box is automatically checked for all the other rows, and then click "OK." The system should then begin working. The process could take several minutes. When I followed this procedure, I received several "Access Denied" errors, suggesting that the system was unable to set the permissions as I had directed. I think this might be one of the reasons why User B is still able to access files in User A's account folders. Is there any other way I could accomplish my goal here? Thank you.

  Read the article

• xterm not wrapping text properly

  - by mulllhausen

  I'm configuring both my gnome-terminal and xterm columns (i still haven't picked which of these I will be using) and I have a couple of issues I would like to fix: the typing area seems to be smaller (fewer columns) than the display area the typed text is not wrapping to the next line when it reaches the end - it just continues back around on the same line, overwriting the prompt (i have set a custom bash prompt with PS1 in case this is relevant) $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.1 (wheezy) Release: 7.1 Codename: wheezy $ echo $TERM xterm $ stty -a [peter@pc ~] $ stty -a speed 38400 baud; rows 52; columns 126; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $[peter@mine ~] $ # the column width only goes up to here ------------------------------------------------> the results are identical in both the xterm and in gnome-terminal 3.4.1.1 and as you can see, the output of the stty -a command goes right up to the edge of the screen, while the typing does not go that far. I have found that I can get the desired result by setting the columns to a very large number, eg: $ stty cols 1800 this fixes both problems. Is it the right way to go about solving this problem? Will this "break" any of the output from programs? So far I have tried top and stty -a and these seem OK. more info as requested in the comments i found that if i cat some input into a file then the columns actually strech the full width of the terminal window: [peter@mine applications] $ cat > /tmp/asd aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaasssssssssssssssssssssssssssssssssssssssssssssssssssssssssssqqqqqqqqqqqqqqqq qqqq does this imply that it is actually bash that is restricting the number of columns and not the terminal? if so then how to alter the number of columns in bash?

  Read the article

• SQL Server 2008 R2 upgrade fails on upgrade rule check

  - by Tim

  I'm trying to upgrade an evaluation instance of SQL Server 2008 to a fully licensed instance of SQL Server 2008 R2. I made it most of the way through the installer, but I'm getting stopped at the Upgrade Rules page - the SQL Server Analysis Services Upgrade Service Functional Check is failing. The specific error I get: Rule "SQL Server Analysis Services Upgrade Service Functional Check" failed. The current instance of the SQL Server Analysis Services service cannot be upgraded because the Analysis Services service is disabled or not online. Please start the service and then run the upgrade rules check again. Simple enough - just need to start the service. Here's where it gets troublesome. When I open Services and go to start the SQL Server Analysis Services (MSSQLSERVER) service, it provides me the following message: The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Trying from the command line as Administrator yields: PS C:\Windows\System32 net start MSSQLServerOLAPService The SQL Server Analysis Services (MSSQLSERVER) service is starting... The SQL Server Analysis Services (MSSQLSERVER) service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. I've tried changing the logon setting of this service to Administrator, a user with admin privileges, and both the Local System and Network Service accounts - nothing works. In addition, when I look at the service through the SQL Server Configuration Manager (also run as Administrator), attempting to change the logon setting for the service results in the message: The server threw an exception. [0x80010105] I have no need for analysis services themselves - all I need is for this one service to be running long enough to do the R2 upgrade, then it can shut down again. Any thoughts on how to get the Analysis Services service running? Update: Checking the event log, I found an error logged to the Application log from the MSSQLServerOLAPService. It has event ID 0, task category (289), and says: The service cannot be started: XML parsing failed at line 1, column 4: Unrecognized input signature.

  Read the article

• Apache/Jboss Issue - is this connection timeout?

  - by user115391

  We have an application. The architecture is as below 1 load balancer (apache), which redirects to 2 app servers (jboss). The site is working fine and I am able to access it fine. But sometimes, randomly the homepage takes a while (like 30-40 secs) to load. I tried checking the logs but could not figure out why. I used the httptraffic analyzer, fiddler to see the traffic, but it just says the request/response took 30 secs or so. I checked the apache access logs, mod_jk.log. My configurations are below mod-jk.conf LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log #JkLogLevel info #JkLogLevel debug JkLogLevel error # Select the log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T %P %{tid}P %D" JkMount /__application__/* loadbalancer JkUnMount /__application__/images/* loadbalancer <VirtualHost *:8080 > JkMountFile conf/uriworkermap.properties </VirtualHost> JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ----------------------------- uriworkermap.properties Simple worker configuration file # Mount the Servlet context to the ajp13 worker /=loadbalancer /*=loadbalancer ----------------------------- workers.properties worker.list=loadbalancer,status worker.template.port=8009 worker.template.type=ajp13 worker.template.lbfactor=1 worker.template.prepost_timeout=10000 worker.template.connect_timeout=10000 worker.template.ping_mode=A worker.worker1.reference=worker.template worker.worker1.host=hostname1 worker.worker2.reference=worker.template worker.worker2.host=hostname2 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=worker1,worker2 worker.status.type=status ----------------------------- my jboss server.xml - $JBOSS_HOME/server/default/deploy/jbossweb.sar/server.xml --------------------------------- The logs from access log is below The issue where it took time - look at the seconds column [23/Mar/2012:12:10:38 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:10:49 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:11:10 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:11:31 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:11:52 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - The one after the issue x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET / HTTP/1.1" 200 138 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /index.jsp HTTP/1.1" 302 - x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /home.jsp HTTP/1.1" 200 936 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "POST /login/ HTTP/1.1" 200 8895 x.x.x.x - - [23/Mar/2012:12:12:18 -0400] "GET /login/includes/login-style.css HTTP/1.1" 304 - Would it be a cache or timeout issue? Any help is appreciated. Thanks.

  Read the article

• Configuring OpenLDAP and SSL

  - by Stormshadow

  I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never Why is it that I can connect to the same server using one version of JRE while I cannot with another ?

  Read the article

• Trouble connecting to vsftpd on ubuntu server

  - by littleK

  I have installed Ubuntu Server 10.10 and I am using it to host a domain that I have. I am trying to set up FTP for the server, but I am running into some problems. I have successfully installed vsFTPd and I have opened up ports 20, 21 on my firewall. In my vsFTPd configuration, I have enabled SSL. Every time I try to connect to my server via FTP, I receive a "Connection Refused" error. I have had a little more success with SSL disabled, however the connection process will time out after the LIST command (but it does accept my authentication). Here is my vsFTPd configuration, the SSL stuff is at the bottom: # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem # SSL ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES Thanks!

  Read the article

• Varnish default.vcl grace period

  - by Vladimir

  These are my settings for a grace period (/etc/varnish/default.vcl) sub vcl_recv { .... set req.grace = 360000s; ... } sub vcl_fetch { ... set beresp.grace = 360000s; ... } I tested Varnish using localhost and nodejs as a server. I started localhost, the site was up. Then I disconnected server and the site got disconnected in less than 2 min. It says: Error 503 Service Unavailable Service Unavailable Guru Meditation: XID: 1890127100 Varnish cache server Could you tell me what could be the problem? sub vcl_fetch { if (beresp.ttl < 120s) { ##std.log("Adjusting TTL"); set beresp.ttl = 36000s; ##120s; } # Do not cache the object if the backend application does not want us to. if (beresp.http.Cache-Control ~ "(no-cache|no-store|private|must-revalidate)") { return(hit_for_pass); } # Do not cache the object if the status is not in the 200s if (beresp.status >= 300) { # Remove the Set-Cookie header #remove beresp.http.Set-Cookie; return(hit_for_pass); } # # Everything below here should be cached # # Remove the Set-Cookie header ####remove beresp.http.Set-Cookie; # Set the grace time ## set beresp.grace = 1s; //change this to minutes in case of app shutdown set beresp.grace = 360000s; ## 10 hour - reduce if it has negative impact # Static assets - browser caches tpiphem for a long time. if (req.url ~ "\.(css|js|.js|jpg|jpeg|gif|ico|png)\??\d*$") { /* Remove Expires from backend, it's not long enough */ unset beresp.http.expires; /* Set the clients TTL on this object */ set beresp.http.cache-control = "public, max-age=31536000"; /* marker for vcl_deliver to reset Age: */ set beresp.http.magicmarker = "1"; } else { set beresp.http.Cache-Control = "private, max-age=0, must-revalidate"; set beresp.http.Pragma = "no-cache"; } if (req.url ~ "\.(css|js|min|)\??\d*$") { set beresp.do_gzip = true; unset beresp.http.expires; set beresp.http.cache-control = "public, max-age=31536000"; set beresp.http.expires = beresp.ttl; set beresp.http.age = "0"; } ##do not duplicate these settings if (req.url ~ ".css") { set beresp.do_gzip = true; unset beresp.http.expires; set beresp.http.cache-control = "public, max-age=31536000"; set beresp.http.expires = beresp.ttl; set beresp.http.age = "0"; } if (req.url ~ ".js") { set beresp.do_gzip = true; unset beresp.http.expires; set beresp.http.cache-control = "public, max-age=31536000"; set beresp.http.expires = beresp.ttl; set beresp.http.age = "0"; } if (req.url ~ ".min") { set beresp.do_gzip = true; unset beresp.http.expires; set beresp.http.cache-control = "public, max-age=31536000"; set beresp.http.expires = beresp.ttl; set beresp.http.age = "0"; } ## If the request to the backend returns a code other than 200, restart the loop ## If the number of restarts reaches the value of the parameter max_restarts, ## the request will be error'ed. max_restarts defaults to 4. This prevents ## an eternal loop in the event that, e.g., the object does not exist at all. if (beresp.status != 200 && beresp.status != 403 && beresp.status != 404) { return(restart); } if (beresp.status == 302) { return(deliver); } # Never cache posts if (req.url ~ "\/post\/" || req.url ~ "\/submit\/" || req.url ~ "\/ask\/" || req.url ~ "\/add\/") { return(hit_for_pass); } ##check this setting to ensure that it does not cause issues for browsers with no gzip if (beresp.http.content-type ~ "text") { set beresp.do_gzip = true; } if (beresp.http.Set-Cookie) { return(deliver); } ##if (req.url == "/index.html") { set beresp.do_esi = true; ##} ## check if this is needed or should be used # return(deliver); the object return(deliver); } sub vcl_recv { ##avoid leeching of images call hot_link; set req.grace = 360000s; ##2m ## if one backend is down - use another if (req.restarts == 0) { set req.backend = cache_director; ##we can specify individual VMs } else if (req.restarts == 1) { set req.backend = cache_director; } ## post calls should not be cached - add cookie for these requests if using micro-caching # Pass requests that are not GET or HEAD if (req.request != "GET" && req.request != "HEAD") { return(pass); ## return(pass) goes to backend - not cache } # Don't cache the result of a redirect if (req.http.Referer ~ "redir" || req.http.Origin ~ "jumpto") { return(pass); } # Don't cache the result of a redirect (asking for logon) if (req.http.Referer ~ "post" || req.http.Referer ~ "submit" || req.http.Referer ~ "add" || req.http.Referer ~ "ask") { return(pass); } # Never cache posts - ensure that we do not use these strings in our URLs' that need to be cached if (req.url ~ "\/post\/" || req.url ~ "\/submit\/" || req.url ~ "\/ask\/" || req.url ~ "\/add\/") { return(pass); } ## if (req.http.Authorization || req.http.Cookie) { if (req.http.Authorization) { /* Not cacheable by default */ return (pass); } # Handle compression correctly. Different browsers send different # "Accept-Encoding" headers, even though they mostly all support the same # compression mechanisms. By consolidating these compression headers into # a consistent format, we can reduce the size of the cache and get more hits. # @see: http:// varnish.projects.linpro.no/wiki/FAQ/Compression if (req.http.Accept-Encoding) { if (req.url ~ "\.(jpg|png|gif|gz|tgz|bz2|tbz|mp3|ogg|ico)$") { # No point in compressing these remove req.http.Accept-Encoding; } else if (req.http.Accept-Encoding ~ "gzip") { # If the browser supports it, we'll use gzip. set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { # Next, try deflate if it is supported. set req.http.Accept-Encoding = "deflate"; } else { # Unknown algorithm. Remove it and send unencoded. unset req.http.Accept-Encoding; } } # lookup graphics, css, js & ico files in the cache if (req.url ~ "\.(png|gif|jpg|jpeg|css|.js|ico)$") { return(lookup); } ##added on 0918 - check if it causes issues with user specific content if (req.request == "GET" && req.http.cookie) { return(lookup); } # Pipe requests that are non-RFC2616 or CONNECT which is weird. if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { ##closing connection and calling pipe return(pipe); } ##purge content via localhost only if (req.request == "PURGE") { if (!client.ip ~ purge) { error 405 "Not allowed."; } return(lookup); } ## do we need this? ## return(lookup); }

  Read the article

• Can't Get Virtual Users Setup in VSFTPD -Tried Everything

  - by N.T.

  Have Ubuntu 11.10 with vsftpd installed and working. Can not get virtual users setup at all? Vsftpd will allow main Ubuntu owner account to login, but nothing else? I've followed several tutorials on adding virtual users, but nothing works? I just need to add 2 virtual users and have them be able to upload files to vsftpd Ubuntu computer from other computers on my Lan network. Everywhere I've looked, people just point toward tutorials on adding virtual users, but that just is NOT working. I've been struggling with this for over a week now! PLEASE Help. Thanks. I'll even give a donation if someone can figure this out. here is the vsftpd.conf file I am using. I copied the original, and make a new one, every time I try a tutorial. So far, none have worked. Here is the vsftpd.conf file I'm using. (I hope this helps?) # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to Sage FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd local_root=/media/FilesDrive # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem

  Read the article

• Moving the swapfiles to a dedicated partition in Snow Leopard

  - by e.James

  I have been able to move Apple's virtual memory swapfiles to a dedicated partition on my hard drive up until now. The technique I have been using is described in a thread on forums.macosxhints.com. However, with the developer preview of Snow Leopard, this method no longer works. Does anyone know how it could be done with the new OS? Update: I have marked dblu's answer as accepted even though it didn't quite work because he gave excellent, detailed instructions and because his suggestion to use plutil ultimately pointed me in the right direction. The complete, working solution is posted here in the question because I don't have enough reputation to edit the accepted answer. Complete solution: 1. Open Terminal and make a backup copy of Apple's default dynamic_pager.plist: $ cd /System/Library/LaunchDaemons $ sudo cp com.apple.dynamic_pager.plist{,_bak} 2. Convert the plist from binary to plain XML: $ sudo plutil -convert xml1 com.apple.dynamic_pager.plist 3. Open the converted plist with your text editor of choice. (I use pico, see dblu's answer for an example using vim): $ sudo pico -w com.apple.dynamic_pager.plist It should look as follows: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs$ <plist version="1.0"> <dict> <key>EnableTransactions</key> <true/> <key>HopefullyExitsLast</key> <true/> <key>Label</key> <string>com.apple.dynamic_pager</string> <key>OnDemand</key> <false/> <key>ProgramArguments</key> <array> <string>/sbin/dynamic_pager</string> <string>-F</string> <string>/private/var/vm/swapfile</string> </array> </dict> </plist> 4. Change the ProgramArguments array (lines 13 through 18) so that it launches an intermediate shell script instead of launching dynamic_pager directly. See note #1 for details on why this is necessary. <key>ProgramArguments</key> <array> <string>/sbin/dynamic_pager_init</string> </array> 5. Save the plist, and return to the terminal prompt. Using pico, the commands would be: <ctrl+o> to save the file <enter> to accept the same filename (com.apple.dynamic_pager.plist) <ctrl+x> to exit 6. Convert the modified plist back to binary: $ sudo plutil -convert binary1 com.apple.dynamic_pager.plist 7. Create the intermediate shell script: $ cd /sbin $ sudo pico -w dynamic_pager_init The script should look as follows (my partition is called 'Swap', and I chose to put the swapfiles in a hidden directory on that partition, called '.vm' be sure that the directory you specify actually exists): Update: This version of the script makes use of wait4path as suggested by ZILjr: #!/bin/bash #launch Apple's dynamic_pager only when the swap volume is mounted echo "Waiting for Swap volume to mount"; wait4path /Volumes/Swap; echo "Launching dynamic pager on volume Swap"; /sbin/dynamic_pager -F /Volumes/Swap/.vm/swapfile; 8. Save and close dynamic_pager_init (same commands as step 5) 9. Modify permissions and ownership for dynamic_pager_init: $ sudo chmod a+x-w /sbin/dynamic_pager_init $ sudo chown root:wheel /sbin/dynamic_pager_init 10. Verify the permissions on dynamic_pager_init: $ ls -l dynamic_pager_init -r-xr-xr-x 1 root wheel 6 18 Sep 15:11 dynamic_pager_init 11. Restart your Mac. If you run into trouble, switch to verbose startup mode by holding down Command-v immediately after the startup chime. This will let you see all of the startup messages that appear during startup. If you run into even worse trouble (i.e. you never see the login screen), hold down Command-s instead. This will boot the computer in single-user mode (no graphical UI, just a command prompt) and allow you to restore the backup copy of com.apple.dynamic_pager.plist that you made in step 1. 12. Once the computer boots, fire up Terminal and verify that the swap files have actually been moved: $ cd /Volumes/Swap/.vm $ ls -l You should see something like this: -rw------- 1 someUser staff 67108864 18 Sep 12:02 swapfile0 13. Delete the old swapfiles: $ cd /private/var/vm $ sudo rm swapfile* 14. Profit! Note 1 Simply modifying the arguments to dynamic_pager in the plist does not always work, and when it fails, it does so in a spectacularly silent way. The problem stems from the fact that dynamic_pager is launched very early in the startup process. If your swap partition has not yet been mounted when dynamic_pager is first loaded (in my experience, this happens 99% of the time), then the system will fake its way through. It will create a symbolic link in your /Volumes directory which has the same name as your swap partition, but points back to the default swapfile location (/private/var/vm). Then, when your actual swap partition mounts, it will be given the name Swap 1 (or YourDriveName 1). You can see the problem by opening up Terminal and listing the contents of your /Volumes directory: $ cd /Volumes $ ls -l You will see something like this: drwxrwxrwx 11 yourUser staff 442 16 Sep 12:13 Swap -> private/var/vm drwxrwxrwx 14 yourUser staff 5 16 Sep 12:13 Swap 1 lrwxr-xr-x 1 root admin 1 17 Sep 12:01 System -> / Note that this failure can be very hard to spot. If you were to check for the swapfiles as I show in step 12, you would still see them! The symbolic link would make it seem as though your swapfiles had been moved, even though they were actually being stored in the default location. Note 2 I was originally unable to get this to work in Snow Leopard because com.apple.dynamic_pager.plist was stored in binary format. I made a copy of the original file and opened it with Apple's Property List Editor (available with Xcode) in order to make changes, but this process added some extended attributes to the plist file which caused the system to ignore it and just use the defaults. As dblu pointed out, using plutil to convert the file to plain XML works like a charm. Note 3 You can check the Console application to see any messages that dynamic_pager_init echos to the screen. If you see the following lines repeated over and over again, there is a problem with the setup. I ran into these messages because I forgot to create the '.vm' directory that I specified in dynamic_pager_init. com.apple.launchd[1] (com.apple.dynamic_pager[176]) Exited with exit code: 1 com.apple.launchd[1] (com.apple.dynamic_pager) Throttling respawn: Will start in 10 seconds When everything is working properly, you may see the above message a couple of times, but you should also see the following message, and then no more of the "Throttling respawn" messages afterwards. com.apple.dynamic_pager[???] Launching dynamic pager on volume Swap This means that the script did have to wait for the partition to load, but in the end it was successful.

  Read the article

• configuring slime in emacs

  - by CodeKingPlusPlus

  I am in the process of configuring slime for emacs. So far I have read about basic functionality for common lisp such as C-c C-q which invokes the command slime-close-parens-at-point which places the proper number of parens where your mouse is. Another command that seemed cool was invoked by C-c C-c and it would pass the code you are editing in a buffer to the REPL, and "compile" it. Why won't these commands work for me? Anyway, I have downloaded slime via M-x list-packages and do not seem to have this functionality (C-h w and then any of these commands tells me that these commands do note exist). So, I saw a bunch of other slime extensions such as slime-repl', 'slime-fuzzy' and 'hippie-expand-slime'. So I again usedM-x list-packages` and downloaded them. Still I did not have these commands. Here is the content of my emacs file relevant to slime: ;;;Common Lisp and Slime (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-20130626.1151") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-repl-201000404") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/hippie-expand-slime-20130226.1656") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-fuzzy-20100404") (require 'slime) (setq slime-lisp-implementations `((sbcl ("/usr/bin/sbcl")) (ecl ("/usr/bin/ecl")) (clisp ("/usr/bin/clisp" "-q -I")))) (require 'slime-repl) (require 'slime-fuzzy) (require 'hippie-expand-slime) When I execute M-x slime I get the following message in the inferior-lisp buffer where I can execute common lisp code (however, shouldn't this be the slime-repl since I required it?): STYLE-WARNING: redefining EMACS-INSPECT (#<BUILT-IN-CLASS T>) in DEFMETHOD STYLE-WARNING: Implicitly creating new generic function STREAM-READ-CHAR-WILL-HANG-P. WARNING: These Swank interfaces are unimplemented: (DISASSEMBLE-FRAME SLDB-BREAK-AT-START SLDB-BREAK-ON-RETURN) ;; Swank started at port: 46533. Then a slime-error buffer is created with the contents: Invalid protocol message: Symbol "CREATE-REPL" not found in the SWANK package. Line: 1, Column: 28, File-Position: 28 Stream: #<SB-IMPL::STRING-INPUT-STREAM {10056B9C33}> (:emacs-rex (swank:create-repl nil) "COMMON-LISP-USER" t 5) How should I modify my emacs file to give me the functionality of those commands? In my emacs file am I not loading the necessary files? Do I need to install an additional package? If you need more information let me know! All help is much appreciated!

  Read the article

• debian packages version convention

  - by JackWu

  I'm using debian/Ubuntu, and get confused about versions of packages. When using dpkg -l command, I get: ii vim 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor ii vim-common 2:7.3.429-2ubuntu2.1 Vi IMproved - Common files ii vim-runtime 2:7.3.429-2ubuntu2.1 Vi IMproved - Runtime files ii vim-tiny 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor - compact version ii virt-what 1.11-1 detect if we are running in a virtual machine ii w3m 0.5.3-5ubuntu1 WWW browsable pager with excellent tables/frames support ii watershed 6 reduce superfluous executions of idempotent command ii wget 1.13.4-2ubuntu1 retrieves files from the web ii whiptail 0.52.11-2ubuntu10 Displays user-friendly dialog boxes from shell scripts ii whoopsie 0.1.33 Ubuntu crash database submission daemon ii wimlib9 1.5.0-1~webupd8~precise Library to extract, create, modify, and mount WIM files ii wimtools 1.5.0-1~webupd8~precise Tools to extract, create, modify, and mount WIM files ii wireless-tools 30~pre9-5ubuntu2 Tools for manipulating Linux Wireless Extensions ii wpasupplicant 0.7.3-6ubuntu2.1 client support for WPA and WPA2 (IEEE 802.11i) ii x11-common 1:7.6+12ubuntu2 X Window System (X.Org) infrastructure ii x11-utils 7.6+4ubuntu0.1 X11 utilities ii xauth 1:1.0.6-1 X authentication utility ii xbitmaps 1.1.1-1 Base X bitmaps ii xclip 0.12-1 command line interface to X selections ii xfonts-encodings 1:1.0.4-1ubuntu1 Encodings for X.Org fonts ii xfonts-utils 1:7.6+1 X Window System font utility programs ii xkb-data 2.5-1ubuntu1.3 X Keyboard Extension (XKB) configuration data ii xml-core 0.13 XML infrastructure and XML catalog file support rc xpdf 3.02-21build1 Portable Document Format (PDF) reader ii xterm 271-1ubuntu2.1 X terminal emulator ii xz-lzma 5.1.1alpha+20110809-3 XZ-format compression utilities - compatibility commands ii xz-utils 5.1.1alpha+20110809-3 XZ-format compression utilities ii zabbix-agent 1:1.8.11-1 network monitoring solution - agent ii zlib1g 1:1.2.3.4.dfsg-3ubuntu4 compression library - runtime ii zlib1g-dev 1:1.2.3.4.dfsg-3ubuntu4 compression library - development ii zsh 4.3.17-1ubuntu1 shell with lots of features The third column is version, but it all messed up in a way I can't understand. I mean, different packages use total different naming specification. Here are the major questions: Why there are ubuntu in them, and there are not? what all the special -~+ mean? alpha and build, dfsg, what are they? Can I just use them casually? vim and other packages have 2:, what does that mean? How version comparison works, since they can be so different? Can anyone please explain this to me? Or where can I find an official document? Thanks in advance.

  Read the article

• Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

  - by Adam Ryczkowski

  Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

  Read the article

• What other tool is using my hotkey?

  - by Sammy

  I use Greenshot for screenshots, and it's been nagging about some other software tool using the same hotkey. I started receiving this warning message about two days ago. It shows up each time I reboot and log on to Windows. The hotkey(s) "Ctrl + Shift + PrintScreen" could not be registered. This problem is probably caused by another tool claiming usage of the same hotkey(s)! You could either change your hotkey settings or deactivate/change the software making use of the hotkey(s). What's this all about? The only software I recently installed is CPU-Z Core Temp Speed Fan HD Tune Epson Print CD NetStress What I would like to know is how to find out what other tool is causing this conflict? Do I really have to uninstall each program, one by one, until there is no conflict anymore? I see no option for customizing any hotkeys in CPU-Z, and according to docs there are only a few keyboard shortcuts. These are F5 through F9, but they are no hotkeys. There is nothing in Core Temp, and from what I can see... nothing in Speed Fan. Is any of these programs known to use Ctrl + Shift + PrintScreen hotkey for screenshots? I am actually suspecting the Dropbox client. I think I saw a warning recently coming from Dropbox program, something to do with hotkeys or keyboard shortcuts. I see that it has an option for sharing screenshots under Preferences menu, but I see no option for hotkeys. Core Temp actually also has an option for taking screenshots (F9) but it's just that - a keyboard shortcut, not a hotkey. And again, there's no option actually for changing this setting in Options/Settings menu. How do you resolve this type of conflicts? Are there any general methods you can use to pinpoint the second conflicting software? Like... is there some Windows registry key that holds the hotkeys? Or is it just down to mere luck and trial and error? Addendum I forgot to mention, when I do use the Ctrl + Shift + PrintScreen hotkey, what happens is that the Greenshot context menu shows up, asking me where I want to save the screenshot. So it appears to be working. But I am still getting the darn warning every time I reboot and log on to Windows?! I actually tried changing the key bindings in Greenshot preferences, but after a reboot it seems to have returned back to the settings I had previously. Update I can't see any hotkey conflicts in the Widnows Hotkey Explorer. The aforementioned hotkey is reserved by Greenshot, and I don't see any other program using the same hotkey binding. But when I went into Greenshot preferences, this is what I discovered. As you can see it's the Greenshot itself that uses the same hotkey twice! I guess that's why no other program was listed above as using this hotkey. But how can Greenshot be so stupid to use the same hotkey more than once? I didn't do this! It's not my fault... I'm not that stupid. This is what it's set to right now: Capture full screen: Ctrl + Skift + Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Skift + Prntscrn Capture Internet Explorer: Ctrl + Skift + Prntscrn And this is my preferred setting: Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Capture Internet Explorer: I don't use any hotkey for "last region" and IE. But when I set this to my liking, as listed here, Greenshot gives me the same warning message, even as I tab through the hotkey entry fields. Sometimes it even gives me the warning when I just click Cancel button. This is really crazy! On the side note... You might have noticed that I have "update check" set to 0 (zero). This is because, in my experience, Greenshot changes all or only some of my preferences back to default settings whenever it automatically updates to a new version. So I opted to stay off updates to get rid of the problem. It has done so for the past three updates or so. I hoped to receive a new update that would fix the issue, but I think it still reverts back to default settings after each update to a new version, including setting default hotkeys. Update 2 I'll give you just one example of how Greenshot behaves. This is the dialog I have in front of me right now. As you can see, I have removed the last two hotkeys and changed the first one to my own liking. While I was clicking in the fields and removing the two hotkeys I was getting the warning message. So let's say I click in the "capture last region" field. Then I get this: Note that none of the entries include "Ctrl + Shift + PrintScreen" that it's warning about. Now I will change all the hotkeys so I get something like this: So now I'm using QWERTY letters for binding, like Ctrl+Alt+Q, Ctrl+Alt+W and so on. As far as I know no Windows program is using these. While I was clicking through the different fields it was giving me the warning. Now when I try to click OK to save the changes, it once again gives me a warning about "ctrl + shift + printscreen". Update 3 After setting the above key bindings (QWERTY) and saving changes, and then rebooting, the conflict seems to have been resolved. I was then able to set following key bindings. Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn I was not prompted with the warning message this time. Perhaps changing key binding required a system reboot? Sounds far fetched but that appears to be the case. I'm still not sure what caused this conflict, but I know for sure that it started after installing aforementioned programs. It might just have to do with Greenshot itself, and not some other program. Like I said, I know from experience that Greenshot likes to mess with users' settings after each update. I wouldn't be surprised if it was actually silently updated, even though I have specified not to check for updates, then it changed the key bindings back to defaults and caused a conflict with the hotkeys that were registered with the operating system previously. I rarely reboot the system, so that could have added to the conflict. Next time if I see this I will run Hotkey Explorer immediately and see if there is another program causing the conflict.

  Read the article

• How can the Private Bytes of a process be significantly less than its effect on the system commit charge?

  - by bacar

  On a 64-bit Windows Server 2003, I can see using taskmgr or process explorer that the total commit charge is around 3.5GB, yet when I sum the Private Bytes consumed by each process (by running pslist -m and adding all values under the Priv column) the total comes in at 1.6GB. I know which process seems to be causing this (sqlservr.exe) as when I kill the process, the commit charge drops dramatically. However the process in question is consuming only ~220MB of Private Bytes yet killing the process drops the commit charge by ~1.6GB. How is this possible? How can the commit charge be so significantly greater than Private Bytes, which should represent the amount of committed memory? If some other factor contributes to the commit charge, what is that factor and how can I view its impact in process explorer? Note: I claim that I understand the difference between reserved and committed memory already: my investigations above relate specifically to Private Bytes which includes only committed memory and excludes reserved memory. the Virtual Size of the process in this case is over 4GB, but this should be irrelevant - Virtual Size in procexp represents reserved, not committed memory, and should not contribute to the commit charge. I'm particularly interested in generalised answers to this question: I'm assuming that if sqlservr.exe can behave in this way, that any process potentially could. Further Investigations I notice that pointing Sysinternals VMMap at this process reports a committed "Private Data" of 1.6GB despite Procexp's reported a Private Bytes of 220MB. This is particularly strange given that the documentation for this field in the "Windows® Sysinternals Administrator's Reference" states that: Private Data memory is memory that is allocated by VirtualAlloc and that is not further handled by the Heap Manager or the .NET runtime, or assigned to the Stack category... VMMap’s definition of “Private Data” is more granular than that of Process Explorer’s “private bytes.” Procexp’s “private bytes” includes all private committed memory belonging to the process. i.e. that VMMap's committed "Private Data" should be smaller than procexp's "Private Bytes". Also, after reading the 'Process committed memory' section of Mark Russinovich's excellent Pushing the Limits of Windows: Virtual Memory, he highlights two cases which won't show up in Private Bytes: File mapping views with copy-on-write semantics (however, according to VMMap there is no significant space allocated to Mapped Files). pagefile-backed virtual memory (however, I tried testlimit with the -l flag as suggested, and no significant memory is consumed by pagefile-backed sections)

  Read the article

• Network Services disabled (not starting) on Windows XP

  - by Rickesh John

  I am currently running Windows XP Service Pack 3 on my system. But today, when I failed to connect to the internet, via a LAN cable, I realized that almost all of the vital network services had stopped functioning. Any attempts to start it through services.msc gives me the following message: Could not start the DNS Client Service on Local Computer Error 1068: The dependency service group failed to start All my software or services that are related to networking have stopped functioning, for example, Windows Firewall is turned off permanently, so is my Avast Anti-Virus' service of Real Time Shields and Web Shield. When I insert the LAN wire into my laptop, it registers itself, but this is what I get when I do a ping localhost C:>ping localhost Unable to contact IP driver, error code 2 Moveover, with ipconfig I get this : Windows IP Configuration An internal error occurred: The request is not supported. Please contact Microsoft Product Support Services for further help. Additional Information: Unable to query host name On some further poking around, I saw that none of the "NETWORK SERVICE" process in task manager, except svchost.exe were running. Also, when I first opened the task manager, I saw some 20 processes running with username column empty for most of them. With some search in Google, I found out that these services were important, DHCP DNS Net logon Network connection Network location Awareness TCP/IP Net BIOS Helper none of them, except Network Connections are working, they do not start. The event viewer of my system shows a bunch of 7000 and 7001 event errors. I have tried re installing the network driver, booting in safe mode with networking and tried to enable those services mentioned above. I had disabled System Restore some time back, so I have no restore points for my system. I tried a lot of things from Google searches but none of them worked. Also, with such a long list of issue, I am a little confused as to what should I search on the internet. :( One more thing I would like to mention, previous morning, my anti-virus Avast detected a RootKit buried deep in my system folders. It was removed, but maybe this was a problem caused by the root kit. I did run a boot-time scan but no viruses were found. Please please please advice. Is formatting and re-installation of Windows my only option?

  Read the article

• Should one replace the usage addJSONData of jqGrid to the usage of setGridParam(), and trigger('relo

  - by Oleg

  Hi everybody who use jqGrid! I am a new on stackoverflow.com and it seems to me that a lot of peoples who use stackoverflow.com are not only the persons who have a problem which must be quickly solved. A lot of people read stackoverflow.com to look at well-known things from the other side. Sometime perhaps the reason is a self-training (to stay in the good form) during solving of problems other people. For all these gays, who not want only to solve his problem is my question. I wrote recently an answer to the question "jqGrid display default “loading” message when updating a table / on custom update". During writing of the answer I thought: why he uses addJSONData() function for refresh of data in the grid instead of changing URL with respect of setGridParam() and refreshing jqGrid data with respect of trigger('reloadGrid')? At the beginning I wanted to recommend using of 'reloadGrid', but after thinking about this I understood, that I am not quite sure what the best way is. At least I can't explain in two sentences why I prefer the second way. So I decide that it could be an interesting subject of a discussion. So to be exactly: We have a typical situation. We have a web page with at least one jqGrid and some other controls like combo-boxes (selects), checkboxes etc. which give user possibilities to change scope on information displayed in a jqGrid. Typically we define some event handler like jQuery("#selector").change(myRefresh).keyup(myKeyRefresh) and we need reload the jqGrid contain based on users choose. After reading and analyzing of the information from additional users input we can refresh jqGrid contain in at least two ways: Make call of $.ajax() manual and then inside of success or complete handle of $.ajax call jQuery.parseJSON() (or eval) and then call addJSONData function of jqGrid. I found a lot of examples on stackoverflow.com who use addJSONData. Update url of jqGrid based on users input, reset current page number to 1 and optionally change the caption of the grid. All these can be done with respect of setGridParam(), and optionally setCaption() jqGrid methods. At the end one call trigger('reloadGrid') method of the grid. To construct the url, by the way I use mostly jQuery.param function to be sure, that I all url parameters packed correctly with respect of encodeURIComponent. I want that we discuss advantages and disadvantages of both ways. I use currently the second way, so I start with advantages of this one. One can say me: I call existing Web Service, convert received data to the jqGrid format and call addJSONData. This is the reason why I use addJSONData method! OK, I choose another way. jqGrid can make a call of the Web Service directly and fill results inside of grid. There are a lot of jqGrid options, which allow you to customize this process. First of all, one can delete or rename any standard parameter sent to server with respect of prmNames option of jqGrid or add any more additional parameters with respect of postData option (see http://www.trirand.com/jqgridwiki/doku.php?id=wiki:options). One can modify all constructed parameters immediately before jqGrid makes corresponding $.ajax request by defining of serializeGridData() function (one more option of jqGrid). More than that, one can change every $.ajax parameter by setting ajaxGridOptions option of jqGrid. I use ajaxGridOptions: {contentType: "application/json"} for example as a general setting of $.jgrid.defaults. The ajaxGridOptions option is very powerful. With respect of ajaxGridOptions option one can redefine any parameter of $.ajax request sending by jqGrid, like error, complete and beforeSend events. I see potentially interesting to define dataFilter event to be able makes any modification of the row data responded from the server. One more argument for using of trigger('reloadGrid') way is blocking of jqGrid during ajax request processing. Mostly I use parameter loadui: 'block' to block jqGrid during JSON request sending to server. With respect of jQuery blockUI plugin http://malsup.com/jquery/block/ one can block more parts of web page as the grid only. To do this one can call jQuery('#main').block({ message: '<h1>Die Daten werden vom Server geladen...</h1>' }); before calling of trigger('reloadGrid') method and jQuery('#main').unblock() inside of loadComplete and loadError functions. The loadui option could be set to 'disable' in this case. So I don’t see why the function addJSONData() should be used. Can somebody who use addJSONData() function explain me advantages of its usage? Should one replace the usage addJSONData of jqGrid to the usage of setGridParam(), and trigger('reloadGrid')? I am opened to the discussion.

  Read the article

• Ruby on Rail using MYSQL database

  - by Joseph Misiti

  Hey guys, New to rails, trying to figure out something simple. Seems as though I cannot migrate a very simple mysql database using "rake db:migrate" command. Here is the issue: I know rails defaults to sqllite right now, but I need to use mysql for a series of reasons. Use the following commands rails -d mysql MyMoviesSQL cd MyMoviesSQL script/generate scaffold Movies title:string rating:integer rake db:migrate never get past here because i see the following error: in /Users/user/websites/MyMovieSQL) rake aborted! NoMethodError: undefined method `ord' for 0:Fixnum: SET NAMES 'utf8' (See full trace by running task with --trace) using trace XXXXX-macbook-pro:MyMovieSQL user$ rake db:migrate --trace (in /Users/user/websites/MyMovieSQL) ** Invoke db:migrate (first_time) ** Invoke environment (first_time) ** Execute environment ** Execute db:migrate rake aborted! NoMethodError: undefined method ord' for 0:Fixnum: SET NAMES 'utf8' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract_adapter.rb:219:inlog' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:323:in execute' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:599:inconfigure_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:594:in connect' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:203:ininitialize' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:75:in new' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/mysql_adapter.rb:75:inmysql_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:223:in send' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:223:innew_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:245:in checkout_new_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:188:incheckout' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:184:in loop' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:184:incheckout' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in synchronize' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:183:incheckout' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:98:in connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:326:inretrieve_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:123:in retrieve_connection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:115:inconnection' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:435:in initialize' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:400:innew' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:400:in up' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/migration.rb:383:inmigrate' /Library/Ruby/Gems/1.8/gems/rails-2.3.5/lib/tasks/databases.rake:116 /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:inexecute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:inexecute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:597:in invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:insynchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:583:ininvoke' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2051:in invoke_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:intop_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:intop_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2023:intop_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2001:in run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:instandard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1998:in run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/bin/rake:31 /usr/bin/rake:19:inload' /usr/bin/rake:19 no clue what is going on, if they want me to add a patch because the methods does not exist, please tell me which file to add it to, and also, how in the future do i figure out which file I need to patch (I see it looks like its a method in FixNum class) here is a patch to a problem that looks similar, but its a different version of ruby http://www.mail-archive.com/[email protected]/msg00250.html versions rails 2.3.5 ruby 1.8.6 gem list yeilds: * LOCAL GEMS * actionmailer (2.3.5, 1.3.6) actionpack (2.3.5, 1.13.6) actionwebservice (1.2.6) activerecord (2.3.5, 1.15.6) activeresource (2.3.5) activesupport (2.3.5, 1.4.4) acts_as_ferret (0.4.1) capistrano (2.0.0) cgi_multipart_eof_fix (2.5.0) daemons (1.0.9) dbi (0.4.3) deprecated (2.0.1) dnssd (0.6.0) fastthread (1.0.1) fcgi (0.8.7) ferret (0.11.4) gem_plugin (0.2.3) highline (1.2.9) hpricot (0.6) libxml-ruby (0.9.5, 0.3.8.4) mongrel (1.1.4) needle (1.3.0) net-sftp (1.1.0) net-ssh (1.1.2) rack (1.0.1) rails (2.3.5) rake (0.8.7, 0.7.3) RedCloth (3.0.4) ruby-openid (1.1.4) ruby-yadis (0.3.4) rubygems-update (1.3.6) rubynode (0.1.3) sqlite3-ruby (1.2.1) termios (0.9.4) thanks in advanced

  Read the article

• WCF: SecurityNegotiationException when using client

  - by bradhe

  So I've been trying to set up certificate authentication for my clients and services. The eventual goal is to partition data based on the certificate a client connects with (i.e. the certificate becomes their credentials in to the greater system and their data is partitioned based on these credentials). I have been able to set it up successfully on both the client and the server side. I have created a certificate and a private key, installed them on my computer, and set up my server such that 1) it has a certificate-based service credential and 2) if a client connects without providing a certificate-based credential an exception is thrown. What I then did was create a simple client and add a certificate credential to the configuration and try to call a simple operation on the service. It looks like the client connects OK, and it looks like the certificate is accepted by the server, but I do get this: SecurityNegotiationException: "The caller was not authenticated by the service." That seems rather ambiguous to me. Note that I am using wsHttpBinding, which supposedly defaults to Windows auth for transport security...but all of these processes are being run as my user account as I'm running in my debug environment. Here is my server configuration: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="MyServiceBinding"> <security mode="Message"> <transport clientCredentialType="None"/> <message clientCredentialType="Certificate"/> </security> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="MyServiceBehavior" name="MyService"> <endpoint binding="wsHttpBinding" bindingConfiguration="MyServiceBinding" contract="IMyContract"/> <endpoint binding="mexHttpBinding" address="mex" contract="IMetadataExchange"> <identity> <dns value="localhost"/> </identity> </endpoint> </service> </services> <behaviors> <serviceBehaviors> <behavior name="MyServiceBehavior"> <serviceMetadata httpGetEnabled="true" policyVersion="Policy15" /> <serviceDebug includeExceptionDetailInFaults="false" /> <serviceCredentials> <serviceCertificate storeLocation="CurrentUser" storeName="My" x509FindType="FindBySubjectName" findValue="tmp123"/> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> Here is my client config -- note that I'm using the same cert for the client that I use on the service: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IMyService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384"/> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false"/> <security mode="Message"> <!--<transport clientCredentialType="Windows" proxyCredentialType="None" realm=""/>--> <message clientCredentialType="Certificate" negotiateServiceCredential="true" algorithmSuite="Default"/> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://localhost:50120/UserServices.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IMyService" behaviorConfiguration="IMyService_Behavior" contract="UserServices.IUserServices" name="WSHttpBinding_IMyService"> <identity> <certificate encodedValue="Some RSA stuff"/> </identity> </endpoint> </client> <behaviors> <endpointBehaviors> <behavior name="IMyService_Behavior"> <clientCredentials> <clientCertificate storeLocation="CurrentUser" storeName="My" x509FindType="FindBySubjectName" findValue="tmp123"/> </clientCredentials> </behavior> </endpointBehaviors> </behaviors> </system.serviceModel> Can anyone please help provide some insight as to what might be up here? Thanks,

  Read the article

• ASP.NET MVC - Views location Problem : The view 'Index' or its master was not found

  - by user326873

  Hi all, I've create an asp.net MVC 2 project, it works fine!! I've been asked to integrate the project in an existing web project in classic asp.net (I've add the folder containing the source, and not make a new project, because they have to bee in same project) I've configured my web.config file <pages pageBaseType="System.Web.UI.Page" > <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> <namespaces> <add namespace="System.Web.Mvc" /> <add namespace="System.Web.Mvc.Ajax" /> <add namespace="System.Web.Mvc.Html" /> <add namespace="System.Web.Routing" /> <add namespace="System.Linq" /> <add namespace="System.Collections.Generic" /> <add namespace="SearchApp.Helpers.CheckBoxList"/> <add namespace="SearchApp.Helpers.Pager"/> </namespaces> </pages> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> <!--- END MVC config section--> and my global.asax file (I'm working under IIS 5.1) : public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "SearchApp", // Route name "SearchApp/{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Search", action = "Index", id = "" } // Parameter defaults ); } protected void Application_Start(Object sender, EventArgs e) { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); } The hierarchy of the project is (I can’t find how to insert Image in the post): +Project ++MVC2AppFolder +++Controller ++++SearchController.cs +++Views ++++Search +++++Index.aspx ++global.asax ++web.config as you can see the global.asax is not in the MVC App folder when I try to access the page Search/index.aspx using this url http://localhost/cstfwsrv/SearchApp/Search.aspx/Index[^] have the following error : I The view 'Index' or its master was not found. The following locations were searched: ~/Views/Search/Index.aspx ~/Views/Search/Index.ascx ~/Views/Shared/Index.aspx ~/Views/Shared/Index.ascx Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: The view 'Index' or its master was not found. The following locations were searched: ~/Views/Search/Index.aspx ~/Views/Search/Index.ascx ~/Views/Shared/Index.aspx ~/Views/Shared/Index.ascx Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [InvalidOperationException: The view 'Index' or its master was not found. The following locations were searched: ~/Views/Search/Index.aspx ~/Views/Search/Index.ascx ~/Views/Shared/Index.aspx ~/Views/Shared/Index.ascx] System.Web.Mvc.ViewResult.FindView(ControllerContext context) +253553 System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) +139 System.Web.Mvc.ControllerActionInvoker.InvokeActionResult(ControllerContext controllerContext, ActionResult actionResult) +10 System.Web.Mvc.<>c__DisplayClass14.<InvokeActionResultWithFilters>b__11() +20 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) +251 System.Web.Mvc.<>c__DisplayClass16.<InvokeActionResultWithFilters>b__13() +19 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList`1 filters, ActionResult actionResult) +178 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +314 System.Web.Mvc.Controller.ExecuteCore() +105 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +39 System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) +7 System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__4() +34 System.Web.Mvc.Async.<>c__DisplayClass1.<MakeVoidDelegate>b__0() +21 System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +12 System.Web.Mvc.Async.WrappedAsyncResult`1.End() +59 System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +44 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +7 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8677678 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 As you can see he search for the Index.aspx page under ~/Views/Search/Index.aspx , wich is under ~/MVC2AppFolder/Views/Search/Index.aspx Is there a way to set in the Route Method, or any where else, the View Path? Thanks’ in advance

  Read the article

< Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >