Search Results

Search found 16547 results on 662 pages for 'physical design'.

Page 437/662 | < Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• How to change the amount of RAM displayed in System Properties

  - by Nicu Zecheru

  I have this product that requires at least 1 GB Physical Memory in order to be installed. On my XP Pro machine I have 1 GB of RAM but in System Properties only 0.99 GB of RAM is displayed. The problem is that the product installer checks the memory displayed in System Properties (just a guess, not sure) and cannot continue the setup because it sees only 0.99 GB. Is there any way to change the displayed memory in the System Properties? Or how can I trick the installer to skip the memory check? Thanks.

  Read the article

• How to check if PAE is enabled? (Windows 7 32 bits)

  - by Altar

  How to tell for sure if PAE (Physical Address Extensions) is enabled or not? There is a SPECIFIC command I can use? I can read a registry value or something? (Windows 7 32 bits) I have found this on Internet but it doesn't answer my question: If your server has hot-add memory ability (ability to add more memory without shutting down the server !!) or data execution prevention (DEP) is enabled then PAE will be enabled automatically !! It only reformulate the question as "does my Qosmio x505 laptop support hot-add memory?"

  Read the article

• Why is my USB-to-VGA'd monitor working, but not showing in Display Settings?

  - by Strilanc

  I have a USB-to-VGA adapter, which I use to connect a second monitor to my laptop (totaling 3 screens). It worked alright with Vista. I upgraded to Windows 7, and now it no longer works properly (I downloaded the latest drivers just to get it to work on 7). The extra monitor is detected and used to extend the desktop (I can move things onto it, etc), but is not shown within the Control Panel. This is annoying because now I can't changes its resolution, set its logical position to match its physical position, etc. Can I do anything, besides waiting for better drivers? I'm mainly concerned with moving its logical position. (I'd also like to understand how Windows can use a monitor it can't detect. Weird.)

  Read the article

• MVVM Light + Blend designer view error: Cannot find resource named 'Locator'.

  - by Linus

  The application runs fine but i could not see my design in the designer view. It says Cannot find resource named 'Locator'. Obviously, i did not change anything in the code, i just did the data binding using the data binding dialog... anyone facing the same problem?

  Read the article

• Best language for scripting large scale file management

  - by Dan

  The National Park Service's Natural Sounds Program collects multiple terabytes of data each year measuring soundscapes. In your opinion, what is best available scripting language to manage massive amounts of files and file types? We would like to easily design and run efficient user-friendly scripts to search for and retrieve/create copies of files that may be located in different directories according a single static hierarchy. The OS will most likely be windows. Thanks!

  Read the article

• organizing images by resolution with batch files

  - by Anthony

  Doing some digging I'm trying to figure out a command line solution for organizing very large archives of images based on their resolution into folders, 1920x1080, 1600x1200, 1600x900, etc. I've come across a few post on Superuser mentioning something called ImageMagick, is that the best method to the madness I'm trying to accomplish? I've never used any command line functions/applets/tools other then those that come from Microsoft. I'm rather new to command line usage but ive been enjoying the hell out of it using Powershell, xcopy and robocopy. I am slowly trying to push myself further into the Linux world with Ubuntu running on one of my physical machines as well as a virtual machine so that's an option as well.

  Read the article

• JavaScript Encapsulation / JQuery

  - by Chris

  I am trying to figure out how to keep my page variables in my application from being defined globally. I've come up with a few methods but am wondering if there is a general standard approach people use. I've got my plugin design pattern down using this approach: http://www.virgentech.com/blog/2009/10/building-object-oriented-jquery-plugin.html. But I'm just not sure how to handle my page level encapsulation.

  Read the article

• Class diagram: how to write down classes that belong to a library?

  - by Michiel Borkent

  I am reverse engineering some Java code into a class diagram. Now I'm wondering how to model classes that are from a library that I didn't design. If I'm writing them down as classes, I should maybe also know what interfaces they implement, etc, and put that in the diagram. How far do I go with this? Is it better to write them down as attributes of my own classes?

  Read the article

• VWD 2008 Express : where can i set absolute positioning as a default?

  - by Justin

  So when I used Visual Web Developer 2005 Express edition, in the ribbon there was a menu option for "Layout", which you could go through and select positioning and set absolute to default. I am using Visual Web Developer 2008 Express now, and I see that you can select format from the menu bar, and set position absolute, for each individual control that you add to the design surface, but is there a place I can just set absolute as the default, like in 2005? Thanks, Justin

  Read the article

• How to stop ethernet interface in bridge configuration from obtaining IP address via DHCP

  - by user71061

  Hi! I'm trying to configure openvpn in bridging configuration. First step of doing this requires creating bridge interface (br0), bridging together physical ethernet interface (eth0) and logical tap0 interface. This can be done with simple script but I want to use less popular approach, configuring bridge interface entirely via /etc/network/interfaces file (on Debian linux). So I have removed all eth0 definitions form /etc/network/interfaces and replaced if with following br0 definition: auto br0 iface br0 inet static pre-up openvpn --mktun --dev tap0 address 10.0.0.1 netmask 255.255.255.0 bridge_ports eth0 tap0 post-down openvpn --rmtun --dev tap0 This works as I expected, but there is only one problem: interface eth0 is part of bridge interface br0 AND it also receive it's own IP address from my DHCP server (located on same LAN where eth0 is connected). My questions is: how to stop eth0 interface from obtaining it's own IP address? (It should only be part of br0 bridge).

  Read the article

• Single page Web App in Java framework or examples?

  - by Adam Gent

  Has anyone seen an example or done the following in Java: http://duganchen.ca/single-page-web-app-architecture-done-right/ That is a design a single page web app that will work with Google SEO with out massive violation of DRY using Java technologies? It doesn't seem terrible hard to do this on my own but I was curious (and lazy) to see if someone had already done it with either Spring or JAX-RS.

  Read the article

• Deriving from a component and implementing IDisposable properly

  - by PaulH

  I have a Visual Studio 2008 C# .NET 2.0 CF project with an abstract class derived from Component. From that class, I derive several concrete classes (as in my example below). But, when I go to exit my Form, though the Form's Dispose() member is called and components.Dispose() is called, my components are never disposed. Can anybody suggest how I can fix this design? public abstract class SomeDisposableComponentBase : Component { private System.ComponentModel.IContainer components; protected SomeDisposableComponentBase() { Initializecomponent(); } protected SomeDisposableComponentBase(IContainer container) { container.Add(this); Initializecomponent(); } private void InitializeComponent() { components = new System.ComponentModel.Container(); } protected abstract void Foo(); #region IDisposable Members bool disposed_; /// Warning 60 CA1063 : Microsoft.Design : Ensure that 'SomeDisposableComponentBase.Dispose()' is declared as public and sealed.* public void Dispose() { // never called Dispose(true); GC.SuppressFinalize(this); } protected virtual void Dispose(bool disposing) { // never called if (!disposed_) { if (disposing && (components != null)) { components.Dispose(); } disposed_ = true; } base.Dispose(disposing); } #endregion } public SomeDisposableComponent : SomeDisposableComponentBase { public SomeDisposableComponent() : base() { } public SomeDisposableComponent(IContainer container) : base(container) { } protected override void Foo() { // Do something... } protected override void Dispose(bool disposing) { // never called base.Dispose(disposing); } } public partial class my_form : Form { private SomeDisposableComponentBase d_; public my_form() { InitializeComponent(); if (null == components) components = new System.ComponentModel.Container(); d_ = new SomeDisposableComponent(components); } /// exit button clicked private void Exit_Click(object sender, EventArgs e) { this.Close(); } /// from the my_form.designer.cs protected override void Dispose(bool disposing) { if (disposing && (components != null)) { // this function is executed as expected when the form is closed components.Dispose(); } base.Dispose(disposing); } } *I note that FX-Cop is giving me a hint here. But, if I try to declare that function as sealed, I get the error: error CS0238: 'SomeDisposableComponentBase.Dispose()' cannot be sealed because it is not an override Declaring that function an override leads to: 'SomeDisposableComponentBase.Dispose()': cannot override inherited member 'System.ComponentModel.Component.Dispose()' because it is not marked virtual, abstract, or override Thanks, PaulH

  Read the article

• How to manage multiple versions of the same record

  - by Darvis Lombardo

  I am doing short-term contract work for a company that is trying to implement a check-in/check-out type of workflow for their database records. Here's how it should work... 1) A user creates a new entity within the application. There are about 20 related tables that will be populated in addition to the main entity table. 2) Once the entity is created the user will mark it as the master. 3) Another user can make changes to the master only by "checking out" the entity. Multiple users can checkout the entity at the same time. 4) Once the user has made all the necessary changes to the entity, they put it in a "needs approval" status. 5) After an authorized user reviews the entity, they can promote it to master which will put the original record in a tombstoned status. The way they are currently accomplishing the "check out" is by duplicating the entity records in all the tables. The primary keys include EntityID + EntityDate, so they duplicate the entity records in all related tables with the same EntityID and an updated EntityDate and give it a status of "checked out". When the record is put into the next state (needs approval), the duplication occurs again. Eventually it will be promoted to master at which time the final record is marked as master and the original master is marked as dead. This design seems hideous to me, but I understand why they've done it. When someone looks up an entity from within the application, they need to see all current versions of that entity. This was a very straightforward way for making that happen. But the fact that they are representing the same entity multiple times within the same table(s) doesn't sit well with me, nor does the fact that they are duplicating EVERY piece of data rather than only storing deltas. I would be interested in hearing your reaction to the design, whether positive or negative. I would also be grateful for any resoures you can point me to that might be useful for seeing how someone else has implemented such a mechanism. Thanks! Darvis

  Read the article

• perfmon reporting higher IOPs than possible?

  - by BlueToast

  We created a monitoring report for IOPs on performance counters using Disk reads/sec and Disk writes/sec on four servers (physical boxes, no virtualization) that have 4x 15k 146GB SAS drives in RAID10 per server, set to check and record data every 1 second, and logged for 24 hours before stopping reports. These are the results we got: Server1 Maximum disk reads/sec: 4249.437 Maximum disk writes/sec: 4178.946 Server2 Maximum disk reads/sec: 2550.140 Maximum disk writes/sec: 5177.821 Server3 Maximum disk reads/sec: 1903.300 Maximum disk writes/sec: 5299.036 Server4 Maximum disk reads/sec: 8453.572 Maximum disk writes/sec: 11584.653 The average disk reads and writes per second were generally low. I.e. for one particular server it was like average 33 writes/sec, but when monitoring in real-time it would often spike up to several hundreds and also sometimes into the thousands. Could someone explain to me why these numbers are significantly higher than theoretical calculations assuming each drive can do 180 IOPs? Additional details (RAID card): HP Smart Array P410i, Total cache size of 1GB, Write cache is disabled, Array accelerator cache ratio is 25% read and 75% write

  Read the article

• Migrating an Active Directory domain controller to AWS

  - by Xavier Hutchinson

  I am required to migrate a Active Directory server into AWS with a couple other servers (SQL and IIS) to create a dev and test environment for our network / development. My plan at this time is to simply rebuild the Active Directory server in AWS from scratch - which is quite time consuming indeed! I was wondering if anyone had a recommendation as to a better and more efficient approach of migrating a copy of a physical Active Directory server to the cloud? The server is Windows Server 2012. Thank you!

  Read the article

• Asp.net Build error?

  - by Surya sasidhar

  hi, when i run the my asp.net application it is showing this message can u help me. Could not load file or assembly 'System.Web.Extensions.Design, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

  Read the article

• Integration of Tomcat 7 with IIS 7

  - by priya

  After following all the steps related to integration of tomcat7 and IIS7 i am getting below error.Any idea what might be the cause?First time when I did all the steps as mentioned in tutorial my site was coming up then suddenly it stop coming up.Again i removed my site from IIS and followed the steps but then every time below error is coming:- HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module IsapiFilterModule Notification AuthenticateRequest Handler StaticFile Error Code 0x80070001 Physical Path D:\New\IISROOT Logon Method Anonymous Logon User Anonymous Failed Request Tracing Log Directory D:\New\Tomcat\logs I have checked the logs but trace log is not created as well as isapi_redirect.logs

  Read the article

• What is the best way to create a wizard for web?

  - by Yan

  I want to create a wizard that includes a few steps, that in the final steps we need to include all the steps and save to the data base. What is the best design to do this ? Is there an implementation for jquery ? Do I need to save the steps in session till the final save ?

  Read the article

• How do you manage large web farms?

  - by Andrew Katz

  I have a quickly growing web farm running IIS 7 (30+ servers). All servers are identical copies of each other and all servers are physical. We update the software about once a month, and in the current process, we follow the following steps: Disable server from pool on F5 load balancer. Disable HTTP Keep-alives in IIS so connections drop quickly. Change default directory of website to new folder containing new binaries. Test server Enable HTTP Keep-alives. Enable server in F5 pool. Move to server 2 Microsoft used to have Application Center which was abandoned a while ago. They have made a second attempt with the Web Farm Framework, but this adds as much QA time testing the release package as it saves in the deployment. Has anyone seen a commercial off the shelf application that is tailored for managing and deploying to large web farms? Thanks!

  Read the article

• How do I define and standardize units in my 3D app?

  - by Omega

  I'm starting to design my object graph for an OpenGL ES 1.1 on Android. What's advisable when it comes to actually drawing my triangles when it comes to controlling their size? Should I store all the vertices in units relative to each other and then multiply them by a value I pass during a draw(GL10 gl)? Would this approach have any impact when it comes time to do frustum culling?

  Read the article

• SVG Parser in Javascript

  - by jsight

  I believe that at one point, I saw a TinySVG implementation that worked in the browser, using the canvas element as the backend. I found a few sites that appeared to indicate it was at http://fuchsia-design.com/CanvaSVG/, however, that site appears to no longer exist. Is this project (or a similar one) still on the web anywhere?

  Read the article

• DotNetNuke - Page Publishing - Scheduled "Go Live", Scheduled Removal

  - by hamlin11

  Is there a module or technique for DotNetNuke that allows you to design a page and have it automatically become viewable to the public at a certain date and time? Also, is it possible to have the page become disabled at a certain date? Thanks

  Read the article

• Dependent properties

  - by Senthilkumar

  Hi I am new to WPF.. Can anyone tell.. What exactly the depentent properties means?.. How it differ from normal properties??? and can i edit the design page in asp 3.5 while am i running the application, because the same is possible in asp 2.0.

  Read the article

• How to get all usages/references of control in DotNetNuke?

  - by macias

  Sorry for lame question but I am literally starting with DNN. When you are in admin/design mode you can list all modules used, and when you click on module at the end you will see the list of controls used in this module with info about filename of the source. The problem I have is in reverse -- I already know the filename with source, I would like to list all modules which use this control. How to do it?

  Read the article

< Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >