Search Results

Search found 24933 results on 998 pages for 'arch linux'.

Page 438/998 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >

  • ssh can't connect after server ip changed

    - by Kery
    I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

    Read the article

  • Display CPU usage separately (without root privileges)

    - by synaptik
    I need to display the CPU usage for each processing core on a single shared-memory 12-core (SMP) machine. I don't have access to install htop, else I would simply use that. I don't need fancy graphs or meters, though they would be nice. For example, simply displaying: X X X X X X X X X X X X where each X is the percentage utilization of 1 of the 12 processing cores on my machine. FYI: I know I can simply look at the utilization in "top" and divide that number by the number of cores on my machine, but I prefer a solution that shows each core separately.

    Read the article

  • XFS: No space left on device

    - by beketa
    I am using XFS on small HDD (/dev/sdb1, less than 1TB) and storing many small files (-32KB). df -h and -i show that it has available space. # df -hv Filesystem Size Used Avail Use% Mounted on /dev/sda3 127G 19G 102G 16% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 168K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 99M 20M 75M 21% /boot /dev/sdb1 136G 123G 14G 91% /mnt/sdb1 # df -iv Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 8421376 36199 8385177 1% / tmpfs 4126158 5 4126153 1% /lib/init/rw udev 4124934 671 4124263 1% /dev tmpfs 4126158 1 4126157 1% /dev/shm /dev/sda1 26112 222 25890 1% /boot /dev/sdb1 24905120 11076608 13828512 45% /mnt/sdb1 However I got No space left on device error. # touch /mnt/sdb1/test touch: cannot touch `/mnt/sdb1/test': No space left on device I think inode64 issue is not related to this case because drive is less than 1TB and df -i shows that there are free inodes. I unmounted and mounted with -o inode64 but got the same error. xfs_repair does not report any problem. xfs_info shows drive information as follows. # xfs_info /dev/sdb1 meta-data=/dev/sdb1 isize=1024 agcount=16, agsize=2227764 blks = sectsz=512 attr=2 data = bsize=4096 blocks=35644210, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=17404, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Any ideas? Thanks!

    Read the article

  • Is it logical that file system acls would be corrupted in a way that adds permission for another user?

    - by wilbbe01
    I was having issues on a shared hosting provider with the host's web server instance not serving some files. I asked the companies support about the issue and they responded with the results of getfacl on my home directory, and added the necessary line to allow their web server to obtain the necessary permissions. All is working happily now, but I noticed a line in the getfacl that was for what appeared to be another username to which I had no relation. I asked them about this and their response was that it was likely some minor corruption and that I could remove the unwanted line with the setfacl -x option. I know I never added the user to my home directory, and I also find it weird that that could truly happen due to corruption. So now that it is fixed I'm a little bit weary of whether or not they were trying to cover up a problem they accidentally gave someone permissions to my account, or if this kind of thing can really be corrupted in that way. Especially when that user is a real user on the same server. Any thoughts? Thanks.

    Read the article

  • Video Player/Library for Ubuntu with ratings and thumbs

    - by greggannicott
    Hi. I've just made the switch to Ubuntu on my main PC and I've been looking for a media player that can: Play all the usual video formats Rate (and ideally, tag) each file Display thumbnails for each file Other than that there isn't much I'm after. Banshee comes close, but doesn't display thumbnails. I've Google'd lots but I'm running out of search terms to try. Does anyone have any suggestions? Cheers!

    Read the article

  • ssh -x : howto get clipboard?

    - by Gupu User
    Hello! I'm connected to a server via ssh -x and my only way to get text out of the system is the x clipboard (unless i want to take thousends of screenshots and OCR over it). I can not execute any programs on the other machine, because i don't have access. How can I achive this?

    Read the article

  • Apache shuts down from time to time

    - by Dugi
    I'm having trouble with my VPS as it keeps shutting apache down at least twice a day. The server is running on CentOS 6 with the latest apache. By shutting down I mean I have to go into SSH and type in this command in order to bring it up again: /sbin/service httpd start I'm not very good with servers and my host doesn't seem to have a nice customer service. Any help would be appreciated as these unexpected downtimes really know to kill one's mood.

    Read the article

  • puppet onlyif specified nodes

    - by Valintinr
    I'm trying to write a puppet template. I have a puppet-master and a few puppet-agents and they all must be divided. I think it's good to do this by the node's hostname. But when I tried to do this I've encountered an error "puppet-agent[169037]: (/Stage[main]//Exec[adduser]) Could not evaluate: Could not find command 'ru1'" see code below exec { 'adduser': command => 'sudo adduser -m -p pawSfQewWrUAA test -G wheel', path => [ '/bin','/usr/bin' ], onlyif => "$hostname == ru1" } I need to specify this task for only one node with the hostname ru1. So have can I do this? Thanks.

    Read the article

  • which user is the website host

    - by Kossel
    I m learning about server, and I'm configuring nginx mysql php wordpress. the server distro is debian 6. I created a new user and I wish each user is the owner of the site folder /var/www/site.one so I chown -R kossel:kossel site.one my problem is, my wordpress only work if I chmod 644 wp-config.php, which all can read wordpress site suggest that file should be 640. and my question is: when someone open mydomain.com, wordpress has to access wp-config.php file, but which user is it actually using to "read" that file? root? user kossel? anyone else? how can I properly give it permission or owner??

    Read the article

  • Multiple network cards, controlling where my traffic goes

    - by thefinn93
    This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

    Read the article

  • What does *:* in netstat output stands for?

    - by chello
    While executing the command /usr/sbin/lsof -l -i -P -n under root user, I am getting this output. COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ... httpd 9164 70 3u IPv4 0x2f70270 0t0 TCP 127.0.0.1:9010 (LISTEN) httpd 9164 70 4u IPv6 0x25af4bc 0t0 TCP *:80 (LISTEN) httpd 9164 70 5u IPv4 0x3149e64 0t0 TCP *:* (CLOSED) httpd 9180 70 3u IPv4 0x2f70270 0t0 TCP 127.0.0.1:9010 (LISTEN) httpd 9180 70 4u IPv6 0x25af4bc 0t0 TCP *:80 (LISTEN) httpd 9180 70 5u IPv4 0x3149e64 0t0 TCP *:* (CLOSED) Please let me know what does *:* stands for? I am interested to know both the ipaddress and port fields. Also what does (CLOSED) mean here?

    Read the article

  • What steps should I take to secure Tomcat 6.x?

    - by PAS
    I am in the process of setting up an new Tomcat deployment, and want it to be as secure as possible. I have created a 'jakarta' user and have jsvc running Tomcat as a daemon. Any tips on directory permissions and such to limit access to Tomcat's files? I know I will need to remove the default webapps - docs, examples, etc... are there any best practices I should be using here? What about all the config XML files? Any tips there? Is it worth enabling the Security manager so that webapps run in a sandbox? Has anyone had experience setting this up? I have seen examples of people running two instances of Tomcat behind Apache. It seems this can be done using mod_jk or with mod_proxy... any pros/cons of either? Is it worth the trouble? In case it matters, the OS is Debian lenny. I am not using apt-get because lenny only offers tomcat 5.5 and we require 6.x. Thanks!

    Read the article

  • iptables redirect single website traffic to port 8080

    - by Luke John Southard
    My goal is to be able to make a connection to one, and only one, website through a proxy. Everything else should be dropped. I have been able to do this successfully without a proxy with this code: ./iptables -I INPUT 1 -i lo -j ACCEPT ./iptabels -A OUTPUT -p udp --dport 53 -j ACCEPT ./iptables -A OUTPUT -p tcp -d www.website.com --dport 80 -j ACCEPT ./iptables -A INPUT -m conntrack --cstate ESTABLISHED,RELATED -j ACCEPT ./iptables -P INPUT DROP ./iptables -P OUTPUT DROP How could I do the same thing except redirect the traffic to port 8080 somewhere? I've been trying to redirect in the PREROUTING chain in the nat table. I'm unsure if this is the proper place to do that tho. Thanks for your help!

    Read the article

  • Does urandom share the same entropy of random?

    - by ???
    Does the entropy pool /dev/random used the same to /dev/urandom? I want to mknod /dev/random 1 9 to replace the slow random, I think the current entropy is randomly enough, if urandom is based on the same entropy, and all succeed random numbers are generated based on that entropy, I don't think there'll be any vulnerable.

    Read the article

  • ruby on rails server is intermittently slow

    - by Richard
    My rails installation was chugging along nicely. Last night we had to perform a hot-patch with was really a standard deploy of some exception code. Once capistrano finished the operation one of our admins discovered that there were two long running passenger processes. While we have deployed release over the past two weeks it would appear that these processes have been here and alive the whole time. Granted they could have been zombies or any other artifact and at this point we do not know what state they were in. Which leads me to the question: There are so many moving parts between the rails application and the OS/hardware that being a SME is probably no longer possible. So; how does a sysadmin perform root-cause analysis with any certainty? And: When do I just start rebooting servers?

    Read the article

  • Is Joerg Schilling’s “sdd” a full replacement for “dd”

    - by fishtoprecords
    I was directed to post here, I started on Stackoverflow.... I'm trying to use 'sdd' on my Debian system, and can't get one set of options to work. They do work in 'dd' so I am wondering if I am specifying them incorrectly, or if sdd didn't implement them, or something else. What I want to do is sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 conv=sync,noerror if I leave out the "conv=..." option, it works, or at least starts copying data. sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 Can you shed a bit of light?

    Read the article

  • How to setup IP alias on bridged interface in Ubuntu

    - by Anonymouslemming
    How do I setup an IP alias on a bridge (br0) device on Ubuntu ? If I wait for br0 to come up and then do /sbin/ifconfig br0:0 192.168.10.1 netmask 255.255.255.0 then it works fine. If however I add the following to my /etc/network/interfaces file, it does not work and the network fails to start: auto br0:0 iface br0:0 inet static address 192.168.10.1 netmask 255.255.255.0 At the moment, I have a script in /etc/network/if-up.d/bridge_alias that does this as follows: #!/bin/bash if [ "${LOGICAL}" == "br0" ] && [ "${PHASE}" = "post-up" ]; then echo -n "Starting br0:0 ... " /sbin/ifconfig br0:0 192.168.10.2 netmask 255.255.255.0 echo "Done!" fi What is the right way of doing this though, just using the OS network config files ?

    Read the article

  • Find command exclude files whose path match a certain pattern

    - by user40570
    I have a find command that looks for files that was modified recently and outputs the date find /path/on/server -mtime -1 -name '*.js' -exec ls -l {} \; I would like it to exclude any deeply nested folder that matches a certain pattern e.g. there are a number of folders that have a "statistics" directory and ".svn" directories. So i'd like to be able to say if the file that was modified yesterday is in a folder named statistics ignore it. Or perhaps not search for files in those folders at all.

    Read the article

  • Apache httpd permissions

    - by DD.
    I have created a directory /xyz/www With the following permissions: -rw-r--r--. 1 myuser developers I edited my http.conf: DocumentRoot "/xyz/www/" <Directory "/xyz/www/"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> I get 403 error: You don't have permission to access / on this server. Looking in the logs: (13)Permission denied: Can't open directory for index: /xyz/www/ I've tried recursively adding 777 permissions but still have the same issue.

    Read the article

  • yum security update - message indicating kernel version not up to date

    - by JMC
    Running yum --security check-update returns this message: Security: kernel-3.x.x-x.63 is an installed security update Security: kernel-3.x.x-x.29 is the currently running version I already ran the yum security update on the kernel, but it looks like it didn't change the version running on the system. What needs to be done to make it run the new kernel? Are there any concerns about why it didn't change during the installation process? The yum log just shows installed for the new kernel no error messages.

    Read the article

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >