Search Results

Search found 22544 results on 902 pages for 'connection closed'.

Page 439/902 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >

• Route a specific user's traffic via VPN but still allow local networking

  - by wbg

  So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

  Read the article

• Windows 2012 remote access can't connect

  - by Gelo Volro

  I have installed Windows Server 2012 for about 9 months ago. Earlier I could connect to my server with an external IP perfectly, but the license for the remote desktop services has ended. First, I thought it was the reason, why I couldn't use my server as RDP-server, to which users may connect. But, than in web I read, that it's possible to use windows native features, just to remove the RDP services, which are trial and the server will work as RDP-server, but with some limitations ( for e.g. such free RDP service may accept only 1 connection and other connection will be disconnected etc ). Is it true, that it's possible? If yes, please give a piece of advice, how should I repair it. Because I don't want to use TightVNC or other stuff. Thanks!

  Read the article

• How SmartDNS Works

  - by Emad

  If you travel outside the US you'll notice that most of the streaming services like Netflix, Pandora, hulu etc are blocked, usually by the service providers themselves. To get around that, people use VPN services. They basically tunnel your traffic through a US server so your requests seem like they are originating in the US. These VPN services fix this blocking problem, but make your connection slower than the normal unVPNed connection. Recently however I've come across something called SmartDNS provided by overplay.net. You pay $5 a month and you get access to their DNS servers. After you change to their DNS you get access to the blocked streaming sites, without slowing down your normal traffic like email and browsing. What I'd like to know is the technical details of how this SmartDNS works. I've done some quick research but that didn't turn up anything of substance. Anybody out there knows?

  Read the article

• SQL Server 2012 LocalDB

  - by user3061846

  I´m a noobie so please be patient ! I developed an app using C# and SQL Server Express 2012 with a local database, my connection string is"Data Source=localhost ; Initial Catalog = scalnet ; Integrated Security=SSPI; Trusted_Connection=Yes"; Everything worked ok till the time I made a setup and tried to install my app in another computer. My first question is: - What version of SQL should I install is this machine? it should be as ligth as possible. - I tried to install SQL exprees 2012 but it gives me an error when I execute my app "A network related or instance specific error occurred while establishing a ..... (provider:Named Pipes Provider, error:40 - Could not open a connection to SQL server." This probably should be a problem with the server configuration but I have no ideia how to solve this... Can anyone point me to the rigth direction ? ? Thanks

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience an immediate connection shutdown. A reset packet is sent to the server, and the socket is signaled that the server has reset the connection (which is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the server's response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• IIS FTP server not working after purchase of SSL certificate

  - by Chris

  I've been connecting to my web server with active mode in FileZilla with no problems. Over the weekend, an SSL certificate was dropped into a folder that I access with FTP, and which contains files for the website. Now I am receiving a 425 error in active mode on the FTP root, so I can't really do anything but log in. In passive mode, I can connect and move around in the directory tree, but the connection seems shaky. Occasionally I'll time out, and I can't get access at all to the folder containing the SSL certificate. My question is how does the SSL certificate affect my FTP connection (if at all)? Does its presence demand the use of FTP over SSL? Note: As far as I know, the only change which occurred was the placement of the SSL certificate. Firewall settings, FTP client and server settings should all be the same as before, when everything was working.

  Read the article

• nat with iptables, re-connecting fail within about 3 minutes

  - by xpu

  i constructed a nat with iptables, as following: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -I PREROUTING -p tcp --dport 9000 -j DNAT --to xx.xx.xx.xx iptables -t nat -I POSTROUTING -p tcp --dport 9000 -j MASQUERADE service iptables save service iptables restart the configuration worked fine, but there was a problem when i disconnected and tried to reconnect again, connection will be refused within about 2~3 minutes, after that, things go fine again. what was the problem? how do i make it to accept new connection after the old one break?

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Winforms Release History : Q1 2010 SP2 (version 2010.1.10.504)

  Telerik Presentation Framework ADDED: VS2010 support for the examples ADDED: Base line support FIXED: A memory leak in some controls which support UI virtualization.Visual Style Builder ADDED: Association for *.tssp files, which are now automatically loaded in the VSB when double-clicked. ADDED: Drag-and-drop support in VSB for *.tssp files. ADDED: All dialogs support default buttons, that is, they can be closed with the Escape or Enter keys. ADDED: States and repository items can be removed with...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Get name (address) of computer from which from which SSH login was made.

  - by amicitas

  After logging onto a linux machine via SSH, I would like to be able to retrieve the name of the computer from which the connection was made. Ideally I am looking for some command like hostname or uname but that would retrieve the name of the client instead of the host. This information must be accessible somewhere, since when I log on I get a message that contains the clinent name from the last login: Last login: Thu Mar 11 18:42:01 2010 from my.address.com The reason for wanting to do this is to be able to take different action in my .login file depending on which computer I am using for connection is from.

  Read the article

• 1K incoming http post requests per second, each with a 10-50K file

  - by Blankman

  I'm trying to figure out what kind of server setup I will need to support: 1K http post requests per second each post will contain a xml file between 5-50K (average of 25 kilobytes) Even if I get a 100 Mb/s connection with my dedicated box (they usually give 10 Mb/s but you can upgrade), from my calculations that is about 12K kb/s which means about 480 25kb files per second. So this means I need around 3 servers then, each with 100 Mb/s connection. Would a single server running HAProxy be able to redirect the requests to other servers or does this mean I need to get something else that can handle more than 100 Mb/s to proxy things out to the other servers? If my math is off I'd appreciate any corrections you may have.

  Read the article

• Route gaming data over wireless and everything else through LAN?

  - by Alex

  I have two internet connections available to me. One is via LAN.. not a great ping, but fast downloads. The other is via USB wireless adapter.. good ping, but slow downloads. I want to connect to both of them simultaneously. I want to be able to specify which data or application will use the wireless connection and route everything else through the lan connection. Is this possible, and how would I do it? Windows 7 x64 is my operating system. Here is the data from route print: http://pastebin.com/vsjQRpSM I'm still unsure of how to use this to make all of my data go through the nvidia lan interface, even after reading route /? Also, if I'm able to achieve that, will it override the ForceBindIP?

  Read the article

• IPSec VPN IP addresses

  - by Randomblue

  I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

  Read the article

• Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

  - by Mouad

  On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

  Read the article

• Are "backwards" terminators for if and case unique to shell scripting?

  - by tomjakubowski

  In bash at least, if and case blocks are closed like this: if some-expr then echo "hello world" fi case $some-var in [1-5]) do-a-thing ;; *) do-another-thing esac as opposed to the more typical close of end or endif/endcase. As far as I know, this rather funny convention is unique to shell scripting and I have never seen such an odd block terminator anywhere else. Sometimes things like this have an origin in another language (like Ruby's elsif coming from Perl), or a strange justification. Does this feature of shell scripting have a story behind it? Is it found in other languages?

  Read the article

• How to retry connections with wget?

  - by Andrei

  I have a very unstable internet connection, and sometimes have to download files as large as 200 MB. The problem is that the speed frequently drops and sits at --, -K/s and the process remains alive. I thought just to send some KILL signals to the process, but as I read in the wget manual about signals it doesn't help. How can I force wget to reinitialize itself and pick the download up where it left off after the connection drops and comes back up again? I would like to leave wget running, and when I come back, I want to see it downloading, and not waiting with speed --,-K/s.

  Read the article

• Error 800 while connecting to VPN

  - by Aamir

  I am trying to connect to my office network through VPN. It used to work fine earlier but now as soon as I hit connect, I get Error 800: Error 800: Unable to establish VPN Connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. I am using Windows XP and I am able to ping the VPN server successfully. I have Symantec Endpoint Protection installed (if it matters). I have tried disabling it as well but nothing changes.

  Read the article

• How to install Ubuntu on PC with no detected OS?

  - by brad54322

  I have a Spanish OS based on 11.04 called 'Darwin OS'. After installing it, the setup file still existed on the desktop. So, I opened it to see what would happen. It got stuck at Detecting file systems so I just closed it. Later, I started having a lot of problems with the OS so I decided to switch to the normal 12.04. But when I booted from my USB, it said An Operating System wasn't found. Try disconnecting any drives that don't contain an Operating system. Press Ctrl-Alt-Del to restart. I tried that a couple of times but nothing happened. What should I do?

  Read the article

• Hardware recommendations for building an Ubuntu encrypted file server

  - by Robert Mashlan

  I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

  Read the article

• Random TCP Resets

  - by allenwei

  We got randomly TCP "reset" error when we send request to remote server. Log from remote server Cisco TCP Connection Terminated,Nov 05 14:43:39 EST: %ASA-session-6-302014: Teardown TCP connection 640068283 for Outside:xxxx to xxxx duration 0:00:00 bytes 4160 TCP Reset-O One my local machine I saw when I use netstat 100703 connections reset due to unexpected data 324186 connections reset due to early user close I also use tcpdump to see what's wrong with it, I saw xxxx.https: Flags [R.], seq 290, ack 1369, win 136, options [nop,nop,TS val 2871790533 ecr 1897173283], length 0 The problem just happened today, we didn't change anything on our server. Anyone know what's wrong with it? Is it related to code we wrote send out request or related to linux configuration?

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Network connectivity issue

  - by kubiej21

  I am a novice cisco user and I am trying to investigate as to why one of our connections went down. We have a fiber network ring that is operating just fine. Connected to this ring via ethernet, is a lone 3560. This connection has worked flawlessly for the past year and a half. This morning, I noticed that I could not connect to that remote switch. I checked the configurations on both switches, and nothing has changed (as I expected). In the field, the port lights were flashing, indicating that some sort of communication is occurring. There is only 1 ethernet cable that has been run between these two locations, so testing an alternate path is not possible. What else can I do to fix this connection?

  Read the article

• How setup federated SQL data to display limited information to a Web server in the DMZ?

  - by Pcav

  I have a SQL server behind a firewall. I need to push some limited SQL 2005 information to a Web Server in the DMZ so that I do not have to let database queries come all the way into the database server on our internal network. I want to push a small amount of dynamic data to a Web server in the DMZ and lock it down so that our hosted website does not need to come into the internal network for information; I want to put a server in the DMZ that will be the only connection allowed to the SQL database. This DMZ server will be the only server that can have any sort of connection to the back-end database so the hosting provider just pull the data from our server in the DMZ...

  Read the article

• Persistent retrying resuming downloads with curl

  - by Svish

  I'm on a mac and have a list of files I would like to download from an ftp server. The connection is a bit buggy so I want it to retry and resume if connection is dropped. I know I can do this with wget, but unfortunately Mac OS X doesn't come with wget. I could install it, but to do that (unless I have missed something) I need to install XCode and MacPorts first, which I would like to avoid. Curl is available though it seems, but I don't know how that works or how to use it really. If I have a list of files in a text file (one full path per line, like ftp://user:pass@server/dir/file1) how can I use curl to download all those files? And can I get curl to never give up? Like, retry infinitely and resume downloads where it left off and such?

  Read the article

• How do I set up a proxy server for home with bandwidth control, download limit options?

  - by Quakeboy

  3 room mates share a single 2 Mbps connection. Have a 40GB per month download limit beyond which speed drops to 256Kbps which is annoying. One of the roommates abuses the connection by downloading beyond his quota limit. I have a Netgear WNR1000v2 Wireless router + ADSL Modem to connect to the internet. We all access internet via Wireless router which connects to ADSL Modem. I need a free proxy solution which can help me set 40GB / 3 (13 GB) limit for each person (every person has 2 devices - a PC and a phone with Wifi) Uniform Bandwidth control - when 2 people browse the internet they should get 1 Mbps each, and when 3 people access, they should get 2Mbps divided by 3. After each person crosses their monthly download limit, they should be able to access the internet with 256Kbps speed only or lesser. Can I have a custom firmware on my wireless router do this (or) Do I need a proxy server ? Please point me to any relevant tutorials (for example with Squid).

  Read the article

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >