Search Results

Search found 2559 results on 103 pages for 'analysis'.

Page 44/103 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • methods for preventing large scale data scraping from REST api

    - by Simon Kenyon Shepard
    I know the immediate answer to this is going to be there is no 100% reliable method of doing this. But I'd like to create a question that details the different possibilities, the difficulty of implementing them and success rates. I would like to go from simple software ip/request speed analysis to high end sophisticated soft/hardware tools, e.g. neural networks. With a goal of predicting and preventing bogus requests and attempts to scrape the service. Many Thanks.

    Read the article

  • Why might one host be unable to access the Internet, when it can ping the router and when all other hosts can?

    - by user1444233
    I have a Draytek Vigor 2830n. It's kicking out a 192.168.3.0 LAN. It performs load-balancing across dual-WAN ports, although I've turned off the second WAN to simplify testing. There are many hosts on the LAN. All IPs are allocated through DHCP, most freely allocated from the pool, but one or two are bound to NIC MAC addresses. All hosts can access the Internet, save one. That host (192.168.3.100 or 'dot100' for short) gets allocated an IP address (and the right gateway address, DNS server addresses, subnet etc.) dot100 can ping itself. It can ping the gateway, and access the latter's web interface via port 80. It's responsive and loss-free (sustained ping over a couple of minutes reports no data loss). Yet, for some reason that evades me, dot100 can't ping an external IP address or domain name. I suspect it's never been able to, because it was getting some Internet access from a second adaptor (different subnet), but that's now been turned off, which exposed the problem. In dot100, I've tried: two operating systems (Windows 8 and Knoppix), to rule out anti-virus programs etc. two physical adaptors two cables, on each adaptor two IPs (e.g. .100 and .103 assigned by Mac and .26 from the pool) both dynamic and assigned (MAC-bound) DHCP-allocated IPs but none of this experiments yielded any variation in the result. dot100 is a crucial host. It's a file server for the network, so I need it to be reliably allocated a consistent IP. Can anyone offer a potential solution or a way forward with the analysis please? My guess My analysis so far leads me to believe it's a router issue. I've checked the web interface very carefully. There are no filters setup in Firewall - General Setup or Filter Setup. I suspect it's a corrupted internal routing table, but the web UI shows this as the Routing table: Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 62.XX.XX.X WAN1 * 62.XX.XX.X/ 255.255.255.255 via 62.XX.XX.X WAN1 S 82.YY.YYY.YYY/ 255.255.255.255 via 82.YY.YYY.YYY WAN1 C 192.168.1.0/ 255.255.255.0 directly connected WAN2 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2

    Read the article

  • Recovering files using Recuva

    - by Nev Meek
    I'm currently using Recuva to recover some files from an external NTFS disk. It finds the files I'm interested in during it's analysis phase (when tools like test-disk fail to find them at all) and reports them as "Not-deleted" and a big green marker to signify 100% chance of recovery. However when it tries to recover the files I get a "the system could not find the file specified" message. Is there any easy way to recover non-deleted files off of a disc that I can no longer simply access through explorer?

    Read the article

  • Is there any way to execute something when closing the laptop's lid?

    - by Matias
    I'm wondering if there is any way to execute a program, run some command or anything else when closing the laptop's lid. My question aims to be generic, both for Windows and Linux. Something useful should be locking the laptop when closing the lid (Win + L in windows), or running expensive processes such as antivirus analysis etc. without doing it manually before closing the lid.

    Read the article

  • Kubuntu solution for analysing/recording streamed flash audio?

    - by marcusw
    I have a Kubuntu system which I stream amateur radio sound to via a flash interface. I want to be able to record the sound that the flash player is making at the press of a button. I also need the capability to do (hopefully real-time) spectrum analysis on the sound. I need a program (a firefox add-on would be ideal) that can do this for me.

    Read the article

  • nginx and awstats and 404's

    - by user66700
    I'm running awstats server stats log from another machine, nginx.conf: http://pastebin.com/buKAdfdd cgi-bin.conf: http://pastebin.com/qbbJ1rwK But I'm getting 404 when I visit http://domain2.com/awstats/awstats.domain.com.html (and the 23 files are there..) in /var/www/awstats/ I was following this, but not sure how to resolve the 404's http://www.goitworld.com/analysis-access-logs-of-nginx-by-awstats/

    Read the article

  • Extracting a SQLCLR assembly

    - by Ed Leighton-Dick
    One of our in-house applications has a SQLCLR assembly which is currently experiencing problems. The developer is having problems recreating the issue using the version that is stored in our source control system, so he suspects that some code may have been released that was not uploaded to source control. Is there a way to extract a SQLCLR assembly into a .dll file so that he can reverse engineer it for analysis?

    Read the article

  • Technically, How does uploading Apps to an Android Phone Work?

    - by unixman83
    Amazon.com has an Android Marketplace. How do the apps go from Amazon.com to my phone? I am looking for a protocol level analysis. Do they use a basic protocol like FTP and then check with a Google digital signature? I do not own an Android. I wish for an explanation of how the protocol operates because I want to provide an android app for free download for my users off my website, like Amazon does.

    Read the article

  • Free tools for analyzing client-server communication issues

    - by roberto
    Hi, we have some issues with a client-server based application and we would like to better understand client-server communication without going to the software company that sold the application. At least we would like to perform the analysis in parallel. Can you suggest to me a dummy proof application that we can easily get and install to analyze client-server traffic? Many thanks!

    Read the article

  • Free tools for analizing client-server comunication issues

    - by roberto
    Hi, we have some issues with a client-server based application and we would like to better understand client-server comunication without going to the software company that sold the application. At least we would like to perform the analysis in parallel. Can you suggest to me a dummy proof application that we can easily get and install to analise client-server traffic? Many thanks!

    Read the article

  • Summing of total with dynamics rows coming external datasource

    - by Gainster
    I am using Excel 2010 and retrieving data from SQL analysis service. When I refresh the data from Excel, the rows all refresh as they are bound to an external datasource. I am adding a separate column with a formula to sum the totals. With an increment or decrement of these rows, the alignment of custom columns goes out. How can I resolve this problem that summing of values become dynamic with adding and removal of rows?

    Read the article

  • HP ProLiant DL380 G3 Running Windows Server 2000 has crashed between 6-7:30am for the past 5 days

    - by user109717
    I have a HP ProLiant DL380 G3 running Windows Server 2000 that has been crashing everyday between 6-730am. This started when I changed out a failing hard drive 6 days ago. I have looked at the scheduled tasks which does not have anything pertaining to this issue. Below are the only things I see in the system log and some of the dump files. Can this be a hardware issue if this happens at a certain time frame everyday? Any help is greatly appreciated. Thanks The previous system shutdown at 6:07:55 AM on 2/7/2012 was unexpected. System Information Agent: Health: The server is operational again. The server has previously been shutdown by the Automatic Server Recovery (ASR) feature and has just become operational again. [SNMP TRAP: 6025 in CPQHLTH.MIB] BugCheck 7A, {3, c0000005, 3400028, 0} Probably caused by : memory_corruption ( nt!MiMakeSystemAddressValidPfn+42 ) Followup: MachineOwner 0: kd !analyze -v * Bugcheck Analysis * * KERNEL_DATA_INPAGE_ERROR (7a) The requested page of kernel data could not be read in. Typically caused by a bad block in the paging file or disk controller error. Also see KERNEL_STACK_INPAGE_ERROR. If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185, it means the disk subsystem has experienced a failure. If the error status is 0xC000009A, then it means the request failed because a filesystem failed to make forward progress. Arguments: Arg1: 00000003, lock type that was held (value 1,2,3, or PTE address) Arg2: c0000005, error status (normally i/o status code) Arg3: 03400028, current process (virtual address for lock type 3, or PTE) Arg4: 00000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address) MODULE_NAME: nt IMAGE_NAME: memory_corruption BugCheck A, {0, 2, 1, 804137d6} Probably caused by : ntkrnlmp.exe ( nt!CcGetVirtualAddress+ba ) * Bugcheck Analysis * * IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 00000000, memory referenced Arg2: 00000002, IRQL Arg3: 00000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 804137d6, address which referenced memory MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe

    Read the article

  • How to fix “SearchAdministration.aspx webpage cannot be found. 404”

    - by ybbest
    Problems: One of my colleague is having a wired issue today with Search Service Application in SharePoint2010.After he created the Search Service Application, he could not browse to the Search Administration (http://ybbest:5555/searchadministration.aspx?appid=6508b5cc-e19a-4bdc-89b3-05d984999e3c) ,he got 404 page not found every time he browse to the page. Analysis After some basic trouble-shooting, it turns out we can browse to any other page in the search application ,e.g. Manage Content Sources(/_admin/search/listcontentsources.aspx) or Manage Crawl Rules(/_admin/search/managecrawlrules.aspx).After some more research , we think some of the web parts in the Search Administration page might cause the problem. Solution You need to activate a hidden feature using #Enable-SPFeature SearchAdminWebParts -url <central admin URL> Enable-SPFeature SearchAdminWebParts -url http://ybbest:5555 If the feature is already enabled, you need to disable the feature first and then enable it. Disable-SPFeature SearchAdminWebParts -url http://ybbest:5555 Enable-SPFeature SearchAdminWebParts -url http://ybbest:5555 References: MSDN Forum

    Read the article

  • SQLAuthority News – Best Practices for Data Warehousing with SQL Server 2008 R2

    - by pinaldave
    An integral part of any BI system is the data warehouse—a central repository of data that is regularly refreshed from the source systems. The new data is transferred at regular intervals  by extract, transform, and load (ETL) processes. This whitepaper talks about what are best practices for Data Warehousing. This whitepaper discusses ETL, Analysis, Reporting as well relational database. The main focus of this whitepaper is on mainly ‘architecture’ and ‘performance’. Download Best Practices for Data Warehousing with SQL Server 2008 R2 Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Data Warehousing, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How to Fix “Error occurred in deployment step ‘Activate Features’: System.TimeoutException:”

    - by ybbest
    Problem: When deploying a SharePoint2013 workflow using Visual Studio, I got the following Error: Error occurred in deployment step ‘Activate Features’: System.TimeoutException: The HTTP request has timed out after 20000 milliseconds. —> System.Net.WebException: The request was aborted: The request was canceled. at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.OnGotResponse(IAsyncResult result) — End of inner exception stack trace — at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) at Microsoft.Workflow.Client.Ht Analysis: After reading AC’s blogpost and I find out the issue is to do with the service bus. Then I found out the following services are not started Solution: So I start the Service Bus Gateway and Service Bus Message Broker and the problem goes away. References: SharePoint 2013 Workflow – Advanced Workflow Debugging with Fiddler

    Read the article

  • Discoverer 11g 11.1.1.2 Certified with EBS 12 on Five New Platforms

    - by Steven Chan
    Oracle Fusion Middleware 11g Release 1 includes Oracle Discoverer.  Discoverer is an ad-hoc query, reporting, analysis, and Web-publishing tool that allows end-users to work directly with Oracle E-Business Suite OLTP data.We certified Discoverer 11gR1 11.1.1.2 with the E-Business Suite Release 11i and 12 on Linux earlier this year.  Our Applications Platforms Group has just released five additional platform certifications for Discoverer 11.1.1.2 for Oracle E-Business Suite Release 12 (12.0.x and 12.1.x).Certified EBS 12 PlatformsLinux x86-64 (Oracle Enterprise Linux 4, 5) Linux x86-64 (RHEL 4, 5) Linux x86-64 (SLES 10) Oracle Solaris on SPARC (64-bit) (Solaris 9, 10) HP-UX Itanium (11.23, 11.31) HP-UX PA-RISC (64-bit) (11.23, 11.31) IBM AIX on Power Systems (64-bit) (5.3, 6.1) Microsoft Windows Server (32-bit) (2003, 2008)

    Read the article

  • Excel 2010 & SSAS – Search Dimension Members

    - by Davide Mauri
    Today I’ve connected my Excel 2010 to an Analysis Services 2008 Cube and I got a very nice (and unexpected) surprise! It’s now finally possibly to search and filter Dimension Members directly from the combo box window: As you can easily imagine, for medium/big dimensions is really – really – really useful! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • What a Performance! MySQL 5.5 and InnoDB 1.1 running on Oracle Linux

    - by zeynep.koch(at)oracle.com
    The MySQL performance team in Oracle has recently completed a series of benchmarks comparing Read / Write and Read-Only performance of MySQL 5.5 with the InnoDB and MyISAM storage engines. Compared to MyISAM, InnoDB delivered 35x higher throughput on the Read / Write test and 5x higher throughput on the Read-Only test, with 90% scalability across 36 CPU cores. A full analysis of results and MySQL configuration parameters are documented in a new whitepaperIn addition to the benchmark, the new whitepaper, also includes:- A discussion of the use-cases for each storage engine- Best practices for users considering the migration of existing applications from MyISAM to InnoDB- A summary of the performance and scalability enhancements introduced with MySQL 5.5 and InnoDB 1.1.The benchmark itself was based on Sysbench, running on AMD Opteron "Magny-Cours" processors, and Oracle Linux with the Unbreakable Enterprise Kernel You can learn more about MySQL 5.5 and InnoDB 1.1 from here and download it from here to test whether you witness performance gains in your real-world applications.  By Mat Keep

    Read the article

  • Manchester UG Presentation Video

    In July I was invited to speak at the UK SQL Server UG event in Manchester.  I spoke about Excel being a good data mining client.  I was a little rushed at the end as Chris Testa-ONeill told me I had only 5 minutes to go when I had only been talking for 10 minutes.  Apparently I have a reputation for running over my time allocation.  At the event we also had a product demo from SQL Sentry around their BI monitoring dashboard solution.  This includes SSIS but the main thrust was SSAS Then came Chris with a look at Analysis Services.  If you have never heard Chris talk then take the opportunity now, he is a top class presenter and I am often found sat at the back of his classes. Here is the video link

    Read the article

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • How to fix “Microsoft SharePoint is not supported with version 4.0.30319.225 of the Microsoft .Net Runtime” in PowerGUI

    - by ybbest
    Today, when I try to run some PowerShell command against SharePoint in PowerGUI , I encounter some error message as below: Problem: Remove-SPSite : Microsoft SharePoint is not supported with version 4.0.30319.225 of the Microsoft .Net Runtime. At C:\SiteCreation.ps1:37 char:14 + CategoryInfo : InvalidData: (Microsoft.Share…mdletRemoveSite:SPCmdletRemoveSite) [Remove-SPSite], PlatformNotSupportedException Analysis: The error message is pretty clear that PowerGUI try to run the PowerShell command under .Net version 4.0 which is not supported by SharePoint2010, SharePoint2010 only support .Net 3.5.So how can I change the settings so that PowerShell does run under .Net3.5 in PowerGui? The solution is pretty easy. Solution: 1. Open your windows explorer and navigate to C:\Program Files (x86)\PowerGUI\ and open the configuration file ScriptEditor.exe.config. 2. Change the supportedRuntime version under Startup settings by removing the version=”v4.0″ as below From To   3. Restart your PowerGUI and rerun your script. It works like a charm.

    Read the article

  • How to fix “Collection was modified; enumeration operation may not execute. “when using Copy.asmx in SharePoint2010

    - by ybbest
    Problem: In my current project, we use copy.asmx web services in SharePoint2010 to upload a document to a document library. In one of the document library, when uploading a document with a choice field, it blows up and the error message is Collection was modified; enumeration operation may not execute. Analysis: After some research , we found out the problem is that we have 2 content types that both have a field called Document Type , although the internal name are different but the display name are exactly the same and this cause the problem. I am still not too sure why, it could possibly a SharePoint bug. Solution: After rename one of the field display name to a different name, it works like a charm. You can download source code with the problem here and source code without the problem here.

    Read the article

  • New Supply Chain, S&OP, & TPM Analyst Reports from Gartner, IDC Now Available

    - by Mike Liebson
    Check out these analyst reports Oracle has recently made available for customers and partners on Oracle.com: Gartner:  MarketScope for Stage 3 Sales and Operations Planning  -  Gartner lead supply chain planning analyst, Tim Payne, discusses the evolving definition of S&OP, the Gartner S&OP maturity model, and recommendations for selecting S&OP technology solutions. Gartner: Vendor Panorama for Trade Promotion Management in Consumer Goods  -  Consumer goods analyst, Dale Hagemeyer, presents an overview of the TPM market, followed by an analysis of vendor offerings. IDC:  Perspective: Oracle OpenWorld 2012 — Supply Chain as a Focus  -  Supply chain analyst, Simon Ellis, discusses supply chain highlights from the October OpenWorld conference. Value Chain Planning highlights include the VCP product roadmap and demand sensing presentations by Electronic Arts (Demantra) and Sony (Demand Signal Repository). For a complete set of analyst reports, visit here.

    Read the article

  • How to fix “Microsoft SharePoint is not supported with version 4.0.30319.225 of the Microsoft .Net Runtime” in PowerGUI

    - by ybbest
    Today, when I try to run some PowerShell command against SharePoint in PowerGUI , I encounter some error message as below: Problem: Remove-SPSite : Microsoft SharePoint is not supported with version 4.0.30319.225 of the Microsoft .Net Runtime. At C:\SiteCreation.ps1:37 char:14 + CategoryInfo : InvalidData: (Microsoft.Share…mdletRemoveSite:SPCmdletRemoveSite) [Remove-SPSite], PlatformNotSupportedException Analysis: The error message is pretty clear that PowerGUI try to run the PowerShell command under .Net version 4.0 which is not supported by SharePoint2010, SharePoint2010 only support .Net 3.5.So how can I change the settings so that PowerShell does run under .Net3.5 in PowerGui? The solution is pretty easy. Solution: 1. Open your windows explorer and navigate to C:\Program Files (x86)\PowerGUI\ and open the configuration file ScriptEditor.exe.config. 2. Change the supportedRuntime version under Startup settings by removing the version=”v4.0″ as below From To   3. Restart your PowerGUI and rerun your script. It works like a charm.

    Read the article

  • Troubleshooting Application Timeouts in SQL Server

    - by Tara Kizer
    I recently received the following email from a blog reader: "We are having an OLTP database instance, using SQL Server 2005 with little to moderate traffic (10-20 requests/min). There are also bulk imports that occur at regular intervals in this DB and the import duration ranges between 10secs to 1 min, depending on the data size. Intermittently (2-3 times in a week), we face an issue, where queries get timed out (default of 30 secs set in application). On analyzing, we found two stored procedures, having queries with multiple table joins inside them of taking a long time (5-10 mins) in getting executed, when ideally the execution duration ranges between 5-10 secs. Execution plan of the same displayed Clustered Index Scan happening instead of Clustered Index Seek. All required Indexes are found to be present and Index fragmentation is also minimal as we Rebuild Indexes regularly alongwith Updating Statistics. With no other alternate options occuring to us, we restarted SQL server and thereafter the performance was back on track. But sometimes it was still giving timeout errors for some hits and so we also restarted IIS and that stopped the problem as of now." Rather than respond directly to the blog reader, I thought it would be more interesting to share my thoughts on this issue in a blog. There are a few things that I can think of that could cause abnormal timeouts: Blocking Bad plan in cache Outdated statistics Hardware bottleneck To determine if blocking is the issue, we can easily run sp_who/sp_who2 or a query directly on sysprocesses (select * from master..sysprocesses where blocking <> 0).  If blocking is present and consistent, then you'll need to determine whether or not to kill the parent blocking process.  Killing a process will cause the transaction to rollback, so you need to proceed with caution.  Killing the parent blocking process is only a temporary solution, so you'll need to do more thorough analysis to figure out why the blocking was present.  You should look into missing indexes and perhaps consider changing the database's isolation level to READ_COMMITTED_SNAPSHOT. The blog reader mentions that the execution plan shows a clustered index scan when a clustered index seek is normal for the stored procedure.  A clustered index scan might have been chosen either because that is what is in cache already or because of out of date statistics.  The blog reader mentions that bulk imports occur at regular intervals, so outdated statistics is definitely something that could cause this issue.  The blog reader may need to update statistics after imports are done if the imports are changing a lot of data (greater than 10%).  If the statistics are good, then the query optimizer might have chosen to scan rather than seek in a previous execution because the scan was determined to be less costly due to the value of an input parameter.  If this parameter value is rare, then its execution plan in cache is what we call a bad plan.  You want the best plan in cache for the most frequent parameter values.  If a bad plan is a recurring problem on your system, then you should consider rewriting the stored procedure.  You might want to break up the code into multiple stored procedures so that each can have a different execution plan in cache. To remove a bad plan from cache, you can recompile the stored procedure.  An alternative method is to run DBCC FREEPROCACHE which drops the procedure cache.  It is better to recompile stored procedures rather than dropping the procedure cache as dropping the procedure cache affects all plans in cache rather than just the ones that were bad, so there will be a temporary performance penalty until the plans are loaded into cache again. To determine if there is a hardware bottleneck occurring such as slow I/O or high CPU utilization, you will need to run Performance Monitor on the database server.  Hopefully you already have a baseline of the server so you know what is normal and what is not.  Be on the lookout for I/O requests taking longer than 12 milliseconds and CPU utilization over 90%.  The servers that I support typically are under 30% CPU utilization, but your baseline could be higher and be within a normal range. If restarting the SQL Server service fixes the problem, then the problem was most likely due to blocking or a bad plan in the procedure cache.  Rather than restarting the SQL Server service, which causes downtime, the blog reader should instead analyze the above mentioned things.  Proceed with caution when restarting the SQL Server service as all transactions that have not completed will be rolled back at startup.  This crash recovery process could take longer than normal if there was a long-running transaction running when the service was stopped.  Until the crash recovery process is completed on the database, it is unavailable to your applications. If restarting IIS fixes the problem, then the problem might not have been inside SQL Server.  Prior to taking this step, you should do analysis of the above mentioned things. If you can think of other reasons why the blog reader is facing this issue a few times a week, I'd love to hear your thoughts via a blog comment.

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >