Search Results

Search found 2484 results on 100 pages for 'dave gallagher'.

Page 44/100 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • Internet connection sharing between Windows XP and Windows 7

    - by Dave
    I bought my lil sister's netbooks for Christmas and I've been having a heck of a time trying to get Internet Connection Sharing to work. The host computer is a Windows XP box and it uses a US Cellular 3G modem dongle thingy to set it's Internet access. Additionally I have a hard wire plugged into the LAN1 port of the router described below. (I tried the WAN port out of desperation but things didn't seem happy that way.) Additionally they have a linksys router (can't remember specific model number, I will find this out) that I was using to take advantage of it's wireless capabilities. Originally thought about updating the router to use dd-wrt, but after reading the instructions it looked like to much of a pita (had to downgrade firmware, then install dd-wrt) to set up, eventually I caved, out of desperation, and ended up successfully installing dd-wrt on the router. I have DHCP turned off on the router, actually all I could select was DHCP forwarder. The netbooks both have windows 7 starter installed on them. Initially, I had the networks joined to a homegroup but I dropped that and everyone is able to see everyone in their respective network explorers. When I turn on Internet Connection Sharing on the host, its IP on the LAN changed to 192.168.0.1, so I arbitrarily decided to assign the router to port 192.168.0.100. When I connect the netbooks they get IPs dynamically. As I stated before, everyone can see everyone in the network explorer, and shares can be accessed. The weird thing is that everyone can ping the router but they cannot ping each others IPs. The status on the netbooks says that there is no Internet Connectivity. Another thing I tried was manually setting the DNS servers on the netbooks to the DNS servers that the host computer has. The funny thing is when I ping an outside domain such as google.com the IP address resolves, however I get no responses from the pings. When I tried plugging the host into the WAN port I could ping the router, nor could I access the router's web access admin. Another thing I tried was turning off the firewall on the netbooks and the firewall off on the host computer for the LAN connection, and they still could not ping each other. Also I thought I should be able to start a remote desktop connection but I couldn't do that either, I also checked to make sure that computers would in fact accept a request for remote desktop connections.

    Read the article

  • Create Google Maps screenshots at regular intervals

    - by Dave Jarvis
    Background People are concerned that building a pipeline to the West Coast of Canada will increase the number of oil tankers, thus increasing the probability of a major oil spill, thereby creating an environmental catastrophe. The AIS Live Ships Map website captures real-time Marine Traffic updates using a Google Maps interface. While it is possible to obtain data from an AIS data feed, often the feeds are either pay-for-use, or otherwise encumbered with license restrictions. Problem The AIS Live Ships website presents a map in the browser: The map above has had its location interactively changed to focus on the area in question: the northern straight of Vancouver Island. Question How would you create a service that captures the map every 30 minutes and that could run, with neither user-intervention nor a significant memory footprint, for a few years? Idea #1 Create a virtual machine. Install and run a light-weight browser. Use Shutter to take captures at regular intervals. Idea #2 Use Python's Ghost Webkit to automate the captures. Thank you!

    Read the article

  • Automate Excel Text Import Wizard?

    - by Dave Mackey
    I receive files on occasion in a fixed width format. I need to import them into Excel but Excel doesn't perfectly pick up the columns. I can do it manually each time with the Text Import Wizard, but I'm wondering if there is a way to create a "text import template" or something similar - since these files are always the same format.

    Read the article

  • Windows Remote-App Server 2012 Office 2013 User Settings not saved

    - by dave
    I have a Windows Server 2012 with RemoteApps enabled. It's running the latest Patches etc. It has Office 2013 installed and Excel and Word are shared to all users. Now I got the Problem that after each Reboot all User Settings are lost. I have a few users who pin previously opened Documents so they dont need to remember all Paths and those are all gone after Reboot. Also last opened Documents is empty and after a Server reboot it brings the office 2013 Window for First time setup where it asks if you want to connect to skydrive and all that. In the RemoteApps Collection I enabled a Userprofile-Drive 100GB drive E: for Storing User profile data. There is a Domain of course and there is no GPO Preventing the user from Storing settings etc. We also got an older Terminal Server 2003 in the same Domain where this is not happening. Any ideas why this is happening that all the Settings are lost after Reboot?

    Read the article

  • Hardware asset management systems

    - by Dave
    I need to track a bunch of specialized testing tools, They are hardware devices used for testing other equipement. Each device has a serial number and is sent out for use in testing. Occasionally they break and have to be sent to the manufacture for repair. I'm looking for an open source application (preferably a webapp) to help manage them. Right now we're using Excel and it's not scaling as we get more tools. They aren't computers so all the standard IT asset management systems don't really fit the bill. I found h-harmony, but that project seems dead?

    Read the article

  • Prepare bootable Mac OS install usb on Windows

    - by Dave
    Hello, Is there any software out there that can simulate Disk Utility (Mac app) for Windows? I need to reinstall leopard on my Mac because I screwed something up on the current OS. The thing is, the DVD drive is broken on there, so I need to prepare a bootable USB drive from my Leopard DMG file. This is easily done with the Disk Utility app on the Mac. But seeing how my cannot even log on to my Mac right now, I don't know how to prepare that USB stick. The only other machine I have is a PC with Windows 7. If anyone has any suggestion, please help me out! Thanks so much!

    Read the article

  • Disconnect VPN Using the Command Line

    - by Dave Johnson
    I make VPN connections using Vista's Connection Manager, and would like to disconnect the VPN connection from the command line so I can create a shortcut command called vpn.disconnect in Promptu Launcher. How can I disconnect the VPN connection via the command line?

    Read the article

  • eSATA hard drive falls asleep, takes ages to wake up.

    - by Dave Van den Eynde
    I'm using an external hard drive, a Western Digital MyBook 1TB of some sort with eSATA on an eSATA II ExpressCard adapter from Belkin on Windows Vista 32-bit. The issue I'm having is that after a while power management kicks in and puts the hard drive to sleep. When I resume my work and browse the drive, for example, the Explorer hangs and while I can still use my other apps, it takes a couple minutes for it to realize it should wake up the drive and recommence work. What's going on?

    Read the article

  • Adding a virtual directory IIS 7.5 Windows 7 Ultimate x64

    - by Dave
    Trying to get my IIS 7.5 playing nice with VS 2008 on Windows 7 Ultimate 64-bit. I'm getting this error: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. This happens when accessing a virtual directory outside C:\inetpub\wwwroot. I'd like to be able to create virtual directories outside the root if I can. I've added the NETWORK SERVICE to the folder hosting the virtual directory, still no luck. This folder is on my C: drive, not a share. TIA

    Read the article

  • Trouble editing ~/.bash_profile: -bash: $'\r': command not found

    - by Dave
    I installed CygWin on Windows 7. Using Notepad, I edited my ~/.bash_profile file to add on to the PATH variable … PATH="${PATH}:/cygdrive/c/apache-ant-1.8.2/bin" Now, when I SSH in to my Windows machine, I get this error … -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: /home/dev/.bash_profile: line 39: syntax error: unexpected end of file and my PATH is not set. Anyone know how I can correct this?

    Read the article

  • Corporate Wiki Organization - Technical Documentation

    - by Dave Jarvis
    Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Software Tools Web Browsers Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

    Read the article

  • How can I connect a SAS drive to USB? [closed]

    - by dave
    I have a Dell T710 with Seagate Cheetah 15k.7 SAS disks. If the T710 motherboard dies, I'll need to resort to one of my nightly off-site backups and salvage the journal/logfile from the SAS disk to bring the backup bang up-to-date. I need a way of reading the healthy-but-inaccessible SAS disc that does not depend on the only SAS-capable machine I have to hand. So I bought: SAS to SATA Adapter and: USB 2.0 to SATA Adapter with Power ...so that I could read the SAS drive via USB. I can plug it all together just fine. The chain looks like: USB - SATA - SAS. But the drive does not spin up and the computer doesn't even acknowledge anything being attached by USB. Is there a cheap external enclosure I can buy for SAS drives? I can't believe these USB to SATA adapters are everywhere but the USB to SAS adapters are almost non-existent...

    Read the article

  • Windows 8.1 upgrade created a second recovery partition. Can I remove the original?

    - by Dave S
    Windows 8.1 upgrade created a second recovery partition. Can I remove the original? Prior to this the partitions were Recovery, EFI, OS(C:), Data(D:). After the upgrade partitions are Recovery, EFI, OS(C:), Recovery, Data(D:). The first Recovery partition is 1023MB the second is 350MB The "Create a system image" tool selects the EFI, OS(C:), and the second 350MB Recovery partitions. The first 1023MB Recovery partition is not listed, I have to "assume" it is now redundant. The factory (HP) Recovery Partition was removed using the HP provided tool after creating recovery disks, and the D: partition created months ago.

    Read the article

  • Problems installing Ruby 1.9.2 and rvm on Debian Lenny

    - by Dave Everitt
    I have currently have Ruby 1.9.1 (bad) and want to install 1.9.3 under rvm. However, rvm requirements gives a long list: install build-essential openssl libreadline6 libreadline6-dev curl git-core zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev automake libtool bison subversion But I've hit a problem here: /# apt-get install libreadline6 Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package libreadline6 ...and (I imagine after just hunting down a Debian source to download curl) finding these packages isn't going to be a picnic. Given that there are few packages to install before I can get rvm to install Ruby 1.9.3, what's a good way forward? My sources.list: deb http://archive.debian.org/debian/ lenny main contrib

    Read the article

  • Routing to a Terminal Services Cluster

    - by Dave
    I am trying to connect to a Load Balanced Windows 2008 R2 cluster using Remote Desktop Services. I have no trouble connecting to the the Servers' IP addresses (.253.16 and .253.17) or the Cluster address (.253.20) from inside the subnet (.253). The trouble is when I try to connect from the other subnet(.251). I can remote to the other non-clustered servers (.253.12 and .253.15) inside the .253 subnet from the .251 without an issue. I receive a ping reply from the cluster and other servers when I am on the .251 subnet. But when I try to connect via remote desktop it times out but only to any of the IPs on the cluster (.20,.17,.16). My ASA 5510 handling the routing reports message in the log: Deny TCP (no connection) from 192.168.251.2/4283 to 192.168.253.16/3389 flag FIN PSH ACK Here is a picture if it helps http://dl.dropbox.com/u/4217864/terminal%20server.jpg Thanks for any help

    Read the article

  • Installing WinPcap on Windows 8

    - by Dave Robinson
    I know there has been lots of discussion already on installing WinPcap on Windows 8. I'm running the RTM version. I was able to install WinPcap without a hitch by using the Windows 7 compatibility mode. Since then, I've noticed that WinPcap has stopped running and is actually no longer even installed. I tried installing it again, but now it continues to tell me that WinPcap does not work with my version of Windows. Compatibility modes and admin privileges make no difference. The only thing I remember doing to my system was installed 900MBs of Windows Updates. Does anyone have any ideas about what I might do to get WinPcap installed? I've already ensured that the compatibility mode settings I changed were in effect for all users. I've already ensured that "run this program as an administrator" is checked on the compatibility tab for all users. I've also tried installing WinPcap 4.1.2 and 4.1.1. No success with either.

    Read the article

  • How to open the Select Users, Computers, Service Accounts or Groups

    - by Dave Rook
    The only way I know how to open the Select Users, Computers, Service Accounts or Groups is by right clicking on a folder and selecting Properties - Security Tab - Edit - Advanced. Below is a screen shot of the window I want to access: Is there any other way to view the full list (Find Now)? I am writing documentation and I want the user to check if a user exists before creating it. I would ideally like them to access this via control panel or similar.

    Read the article

  • Mac updated just now, postgres now broken

    - by Dave
    I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

    Read the article

  • How can I save my operating system and transfer it to a new SSD?

    - by Dave Duhrkoop
    I recently purchased a Mushkim SSD to replace my failing hard drive of my H/P Dv6-12465dx laptop. Physical installation of the SSD should be easy. I have my existing HD divided into five virtual drives, one of which contains the Windows 7 Operating System. There were no back up disks when I purchased the machine originally. How do I go about saving the Operating system and transferring it to the new SSD?

    Read the article

  • Can any postfix guru assist me determine how emails are still being sent via my server from unauthorized sources?

    - by Dave
    Hi all, I'm getting a little concerned as I run a small server hosting a number of websites and manage the email for a few dozen people. Just recently though I've had a couple of notifications from spamcop alerting me that spam has been sent from my server, and when I have a look over the logs from time to time I can indeed see that there are many repeated attempts of mail being sent from my server. Most of the time it gets knocked back from the destination servers but sometimes its getting through. Unfortunately I'm not linux or postfix expert, I can get by but had though I had my machine locked down quite securely, I don't allow relaying, when I check the online DNS/MX tools they tend to report my server as being OK so I'm not sure where to take it now and hoping someone might be able to throw me a few pointers. I get lots of entries like this in my MAIL.INFO log Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 66B88257C12F: from=<>, size=3116, nrcpt=1 (queue active) Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 614C2257C1BC: from=<[email protected]>, size=2490, nrcpt=3 (queue active) and Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6471]: 0A316257C204: to=<[email protected]>, relay=none, delay=384387, delays=384384/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6470]: 5848C257C20D: to=<[email protected]>, relay=none, delay=384373, delays=384370/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) then there tends to be connection timeouts, so from what I see even though I had relaying disabled.. something is getting by and trying to send.. So if you can help that will be greatly appreciated, and any further logging/config info I can supply. Thanks

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >