Search Results

Search found 12331 results on 494 pages for 'desktop wallpaper'.

Page 44/494 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • Is Hyper-V server suitable as a desktop testbench?

    - by Thomas.Winsnes
    At the moment we are running a test bench with several desktop computers, that are reimaged every time we need to test on a different operation system. Also because different versions of our software is tested on each image, we have to install our software every time we want to test it. The problem we have had with going with a virtualization technology is that our software is depending on directx/opengl and 3D acceleration, and this has not been something that virtual machines have excelled at. With the release of SP1 for Windows 7 and Server 2008 R2 Hyper-V has gotten better 3D acceleration support, so we are looking into virtualizing our testbench using this. Our test scenario would most likely be something close to this: 1. Remote into the hyper-V server and load the test VM needed for the current tests 2. Remote into the VM and install the new version of the software 3. Run the tests It would be nice, but not essential, if our support team could remote into the VMs to match the users OS+software combination when doing support. Does anyone have any experience with this kind of settup with hyper-v?

    Read the article

  • What is the max connections via remote desktop for a small server?

    - by Jay Wen
    I have a small server running MS Server 2012. The CPU is a Xeon E3-1230 V2 @ 3.30GHz, 4 Cores, 8 Logical Processors, 8 GB RAM. Main HD is a Samsung 840, and the big storage is a 4 disk WD Black Raid 10 Array in a Synology NAS enclusure. My question is: given this hardware, approximately how many users can the system support via "Remote Desktop Connection"? Assume there are no licensing limits. These are not admin users. I know there is a two admin limit. This boils down to: What resources does one remote connection require? RAM? % of the CPU? Networking bandwidth? I guess the base case would be for a conection where the user is inactive or simply browsing cnn. Once you know this, you know how many you could fit on the machine before something is maxed-out. In reality, users would be mostly on Excel (multi-MB spreadsheets). I know the approx. resources currently required by each copy of Excel.

    Read the article

  • Remote Desktop Services Licensing - Does server have to have a RDS role?

    - by transistor1
    I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

    Read the article

  • Android: how to convert a Drawable to Bitmap

    - by Rob
    How can I convert a Drawable to a Bitmap? I would like to set a certain drawable as the device's wallpaper, but all wallpaper functions accept Bitmaps only (I cannot use WallpaperManager - I'm pre 2.1). Also, my drawables are downloaded from the web and do not reside in R.drawable. Thanks, Rob

    Read the article

  • How to use .html file as a desktop background

    - by nebffa
    I've looked around multiple times for solutions to this, but there aren't any answers. These are related questions without relevant answers: only wants icons wants to retrieve information from web I just have one downloaded .html file in it - matrix raining code - which I think would look totally badass as a wallpaper. Is there any way to accomplish this on Ubuntu? I am running version 13.10

    Read the article

  • how to run an ActiveX that must be visible and topmost on a server without a desktop?

    - by DanJ
    We're writing a server application that needs to use an ActiveX object that must be visible and Top-Most otherwise it doesn't render correctly. The challenge is that servers typically don't have an active desktop, and therefore the applications should not require one. Ours does. I must use this ActiveX, and I don't have access to the source code. When running from within remote-desktop everything works fine as long as the session is open. As soon as the session closes it stops working. I'm guessing this is because there is no desktop. Any ideas how I can work this out in a secure and robust way?

    Read the article

  • How to Get Windows 7 Theme Wallpapers Without Installing Them

    - by Mysticgeek
    Are you using an older version of Windows but like the Windows 7 theme wallpapers? What if you have Windows 7 but you don’t want to install the themes just to get the wallpapers? Here is how to get them without having to install themes. This guest article was written by Ryan Dozier from the Doztech tech blog. Getting the Wallpaper on XP, Vista, or Windows 7 First download and install 7-zip on your machine (link below). After you’ve installed 7-zip, download a Windows 7 theme (link below) and right-click on the theme, select 7-Zip, and Extract to “Theme Name”… A new folder will appear with the theme name on it. When you open it, there will be a folder called DesktopBackground or something similar.   Open the folder to get the wallpapers to view the wallpapers for the theme. You can delete the extra files and just keep the wallpapers!   Getting the Wallpaper on Ubuntu Extracting the wallpaper on Ubuntu can be a little tricky. Just follow these steps and you will be able to do it. First go to the Ubuntu Software Center under the Applications menu. Search for 7zip and click on the arrow to go to the applications menu. Find the Install button and click it. It will take a couple of minutes for 7zip to install. After 7zip installs, close the Ubuntu Software Center and download a Windows 7 theme. Store it somewhere you can access it quickly. Right-click on the theme and select Rename and get rid of the themepack extension and replace it with zip. The file should be “Theme Name.zip” after you rename it. Right-click on the theme and click Extract Here. After  the extracting you will have a new folder with the theme name. Open it and go into the DesktopBackground folder to get the wallpapers. You can delete the extra files and just keep the wallpapers. If you want to get the new Windows 7 Themes Wallpapers, but don’t want to search and install them separately, this is a nice workaround. Links Get 7 zip for Windows  here Get Windows 7 Themes here Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Forest Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp

    Read the article

  • Is it more secure to run a desktop app in a applet?

    - by Tom Brito
    Fist of all, when I say "run a desktop app in a applet" I mean do a Applet application that runs off-line, instead of a Desktop application that runs inside a JFrame. The little I know about applets (and maybe something I say is wrong, please correct me) is that applets have all permitions not granted by default. Also, the applets run inside a Sandbox, that does not allow information in or out without explicity permition. So, if I am focused on security in my application, its best to run it inside an applet (off-line, for a desktop application) then inside a JFrame. Is it right?

    Read the article

  • Business Owners - What Remote Desktop Solution Do You Use To Service Your Clients PCs?

    - by Sootah
    Howdy fellow computer geeks, I am the owner of a local computer repair business that primarily services its clients on-site. On the occasions that we do service the machines in the office we generally have one of our techs pick the computer up while they are out and about and bring it back with them. Only rarely will we require the customer to bring us the computer themselves. In order to reduce costs, be much more efficient, and potentially expand our market far beyond what would be feasible with travel required; I am looking at ways that we can service our clients remotely whenever possible. What we're in need of is a solid remote desktop application that will be incredibly easy for our customers to connect to, as well as be robust enough that we don't need the client babysitting the computer during the entire repair. Ideally I would like to use a web-based solution so that we don't have to walk the customers through installing, connecting, and configuring it over the phone. This would be unacceptable because of the level of service they are used to. Effectively we'd want them to be able to just go to a URL, enter a PIN or something, and then they are connected and ready to rumble. (Obviously the option to just email them a link that'd do all this for them would be what we'd be aiming for) Along with the ease of use factor, we would need the product to not require any further intervention on the part of the client after we have connected. Nobody is going to be happy if we have to call them every 15 minutes so they can reconnect to us every time we reboot - so auto-reconnect is an absolute must. The only product I know of right now that does any of this is LogMeIn Rescue. It allows unattended access, the applet is lightweight and installs quickly, and the customer can either enter a PIN on the site or just click a link emailed to them in order to connect. The only real downside I see to LogMeIn Rescue is that it's $120.00/month per technician. While we'd ultimately end up saving far more than that per month just in fuel costs alone, I'd like to explore any other options out there that I may not have come across. So - Are there any equally good products out there? If so what are they, why do you recommend them, how have you been utilizing them yourself, and what do they cost? Thanks in advance for your help! -Sootah

    Read the article

  • 3 Headed Display Ubuntu Wallpaper

    - by Kyle Brandt
    I got 3 display working in Linux. I have set it up so I have Xinerama and 3 different X sessions. So my 3 displays are not all the same size, two are 1680x1050 and then the other which is between the two is 2560x1600. So my issue is when I chose span, even if the image is larger than all 3 resolutions combined, the center monitor has bars at the top and the bottom because span scales the image it seems. Is there a way if I bypass the gui to have an image span all three monitors but with no scaling? Urgent! Please help! ;-)

    Read the article

  • Maximizing after moving RDC window between different size monitors

    - by msorens
    My Win7 system has two monitors of different sizes. When I open a Remote Desktop Connection on one monitor set to use full screen, both the RDC window and the remote system's desktop fills the monitor. If I then move the window onto my second monitor (1-Restore Down button to make it movable; 2-Drag window to other monitor; 3-Maximize button to fill monitor) the RDC window fills the monitor, but the remote system's desktop remains the same size it was before. Thus, if I move from the larger to the smaller monitor I have scrollbars to see the whole remote desktop, while if I move from the smaller to the larger monitor the remote desktop occupies only a portion of the monitor. My workaround is to close the RDC window completely then re-establish it on the other monitor. Is there a way to avoid this overhead and just resize the remote desktop to fit?

    Read the article

  • Put an application window as wallpaper

    - by Bloodsplatter
    I'm looking to put an application window behind all other windows. I was thinking of using .NET 4 and WPF or Silverlight. I don't have any specific drawing code, I just want my application window as my desktop wallpaper while retaining the interactivity (no mucking around with screenshots etc). Is this even possible and if so, how? Edit: I'm using Windows 7 x64.

    Read the article

  • Help to argue why to develop software on a physical computer rather than via a remote desktop

    - by s5804
    Remote desktops are great and many times a blessing and cost effective (instead of leasing expensive cables). I am not arguing against remote desktops, just if one have the alternative to use either remote desktop or physical computer, I would choose the later. Also note that I am not arguing for or against remote work practices. But in my case I am required to be physically present in the office when developing software. Background, I work in a company which main business is not to develop software. Therefore the company IT policies are mainly focused on security and to efficiently deploying/maintaing thousands of computer to users. Further, the typical employee runs typical Office applications, like a word processors. Because safety/stability is such a big priority, every non production system/application, shall be deployed into a physical different network, called the test network. Software development of course also belongs in the test network. To access the test network the company has created a standard policy, which dictates that access to the test network shall go only via a remote desktop client. Practically from ones production computer one would open up a remote desktop client to a virtual computer located in the test network. On the virtual computer's remote desktop one would be able to access/run/install all development tools, like Eclipse IDE. Another solution would be to have a dedicated physical computer, which is physically only connected to the test network. Both solutions are available in the company. I have tested both approaches and found running Eclipse IDE, SQL developer, in the remote desktop client to be sluggish (keyboard strokes are delayed), commands like alt-tab takes me out of the remote client, enjoying... Further, screen resolution and colors are different, just to mention a few. Therefore there is nothing technical wrong with the remote client, just not optimal and frankly de-motivating. Now with the new policies put in place, plans are to remove the physical computers connected to the test network. I am looking for help to argue for why software developers shall have a dedicated physical software development computer, to be productive and cost effective. Remember that we are physically in office. Further one can notice that we are talking about approx. 50 computers out of 2000 employees. Therefore the extra budget is relatively small. This is more about policy than cost. Please note that there are lots of similar setups in other companies that work great due to a perfectly tuned systems. However, in my case it is sluggish and it would cost more money to trouble shoot the performance and fine tune it rather than to have a few physical computers. As a business case we have argued that productivity will go down by 25%, however it's my feeling that the reality is probably closer to 50%. This business case isn't really accepted and I find it very difficult to defend it to managers that has never ever used a rich IDE in their life, never mind developed software. Further the test network and remote client has no guaranteed service level, therefore it is down for a few hours per month with the lowest priority on the fix list. Help is appreciated.

    Read the article

  • How To Configure Remote Desktop To Hyper-V Guest Virtual Machines

    - by Brian Jackett
    Configuring Remote Desktop (RDP) from a host Hyper-V machine to a guest virtual machine can be tricky, so this post is dedicated to the issues and resolution steps I went through to allow RDP.  Cutting to the point, below are the things to look for followed by some explanation about my scenario if you care to read.  This is not an exhaustive list of what is required, just the items that were causing problems for my particular scenario. Requirements Allow Remote Desktop Connections in guest OS. The network adapter type must allow communication with host machine (e.g. use an “Internal” virtual adapter.) If running Server 2008 R2 on guest, network discovery mode must be turned on. If running Server 2008 R2 on guest, the services supporting network discovery mode must be running: - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host My Environment     A quick word about my environment.  I am running Windows Server 2008 R2 with Hyper V on my laptop and numerous guest VMs running Windows Server 2003 R2 or Windows Server 2008 R2.  I run a domain controller VM and then 1 or 2 SharePoint servers depending on my work needs.  I’ve found this setup to work well except when it comes to the display window for my VMs. The Issue     Ever since I began running Hyper-V I haven’t been able to RDP to my guest VMs which means the resolution for my connection windows ha been limited to what the native Hyper-V connections allow.  During personal use I can put the resolution up to 1152 x 864, but during presentations I am usually limited to a measly 800 x 600.  That is until today when I decided to fully investigate why I couldn’t connect via RDP.     First a thank you to John Ross (@johnrossjr), Christina Wheeler (@cwheeler76) and Clayton Cobb (@warrtalon) for various suggestions while I was researching tonight.  As it turns out I had not 1, not 2, but 3 items preventing me from using RDP.  Let’s dig into the requirements above. Allow RDP Connection     This item I had previously taken care of, but it bears repeating because by default Windows Server 2008 R2 does not allow RDP connections.  Change the setting from “Don’t allow…” to whichever “Allow connections…” setting suits your needs.  I chose the less secure option as this is just my dev laptop. Network Adapter Type     When I originally configured my VMs I configured each to use 2 network adapters: one using the physical ethernet adapter for internet use and a virtual private adapter for communication between the VMs.  The connection for the ethernet adapter is an "”External” adapter and thus doesn’t connect between the host and guest.  The virtual private adapter allowed communication ONLY between the VMs and not to my host.  There is a third option “Internal” which allows communication between VMs as well as to the host.  After finding out this distinction I promptly created an Internal network adapter and assigned that to my VMs. Turn On Network Discovery     Seems like a pretty common sense thing, but in order to allow remote desktop connections the target computer must able to be found by the source computer (explained here.)  One of the settings that controls if a computer can be found on the network is aptly named Network Discovery.  By default Windows Server 2008 R2 turns Network Discovery off for security purposes.  To enable it open up the Network and Sharing Center.  Click “Change Advanced Sharing Settings” on the left.  On the following screen select “Turn on network discovery” for the currently used profile and click Save Settings.  You may notice though that your selection to turn on network discovery doesn’t save.  If this is the case then you most likely don’t have the supporting services running (as was my case.) Network Discovery Supporting Services     There are a total of 4 services (listed again below) that need to be running before you can turn on network discovery (explained here.)  The below images highlight these services.  In my guest VM I found that I had DNS Client already running while the other 3 were disabled.  I set them all to enabled and started the ones that were stopped.  After this change I returned to the Sharing settings screen and found that Network Discovery was turned on.  I’m not sure whether this was picking up my attempt to turn it on previously or if starting those services turned it on.  Either way the end result was a success. - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host Before and After Results     The first image is the smaller square shaped viewing window used by the Hyper-V native connection.  The second is the full-screen RDP connection in all its widescreen glory. Conclusion     Over the past few months I’ve found Hyper-V to be very useful for virtualizing my development environments, but I’ve also had a steep learning curve to get various items configured just right.  Allowing RDP connections to guest VMs was one area that I hadn’t been able to get right for the longest time.  Now that I resolved these issues I hope that others can avoid the pitfalls that I ran into.  If you know of any other items I left off feel free to let me know.        -Frog Out   Links Turning on Network Discovery http://sqlblog.com/blogs/john_paul_cook/archive/2009/08/15/remote-desktop-connection-on-windows-server-2008-r2.aspx Services required for Network Discovery http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2e1fea01-3f2b-4c46-a631-a8db34ed4f84

    Read the article

  • Web versus desktop development - is web development worse?

    - by Josh Kelley
    As a longtime desktop developer looking at doing our first large-scale web application, what are the pros and cons of doing web development? Is developing a web application much worse than developing a desktop app? E.g., is it more tedious or annoying? Is the time to market much worse? Is the web platform excessively limiting? If the answer to any of these is yes, then why? (And how does developing a Flash or Silverlight app compare?)

    Read the article

  • 7 Ways Modern Windows 8 Apps Are Different From Windows Desktop Apps

    - by Chris Hoffman
    Windows 8 apps – originally known as Metro-style apps and now known as Windows 8 style, Modern UI style, or Windows Store style apps, depending on which Microsoft employee you ask — are very different from traditional desktop apps. The Modern interface isn’t just a fresh coat of paint. The new Windows Runtime, or WinRT, application architecture (not to be confused with Windows RT) is very different from the Windows desktop we’re used to. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

  • Can't remove Ubuntu Desktop from dropdown menu on logon screen

    - by Bryan
    Hello All, I'm running Ubuntu on an Eee PC with the Netbook interface. I installed Ubuntu Desktop via Aptitude to see how well it works on the Eee PC, and after a while I wanted to rid myself of it. So, I purged it using Aptitude, but it still shows up as an option in the dropdown menu on the login screen. Is there any way I can remove the Ubuntu Desktop option from the dropdown menu? It's not a big deal I guess... I'm just curious now how to do it. :)

    Read the article

  • Built-in network card not working?

    - by Zeeshan
    Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

    Read the article

  • How to theme the Cinnamon Desktop?

    - by fossfreedom
    I've reading about about the Cinnamon Desktop through this Q&A: How do I install the Cinnamon Desktop? Also I've been reading these theming questions: Difference between GTK theme and GNOME shell theme? How do I get and install more themes, icons, pointers for Ubuntu? I'm trying to understand downloading & installing themes. I see that I can download GTK2 & GTK3 but I'm unsure I understand the differences. I see there are themes such as Unity Themes, Gnome-Shell themes from websites such as Gnome-look.org How do I apply these themes to Cinnamon? I'm new to Cinnamon so a beginners guide would be very useful.

    Read the article

  • Dell Inspiron 1120 Ubuntu Light -> Desktop and now I'm having problems with wifi and suspend

    - by David N. Welton
    I got a Dell Inspiron 1120 which ships with Ubuntu Light, as well as Windows. My wife prefers Ubuntu, but obviously outside of web stuff, you can't do a lot with Light, so I went ahead and installed the Desktop version of Ubuntu (10.10 / maverick). Whereas before it suspended beautifully and connected to wifi networks flawlessly, it now displays the following problems: It seems to suspend ok, but on resume, the screen remains blank, even though the computer appears to wake up again. Wifi doesn't connect. I tried using the suggested proprietary drivers, and those don't seem to change the situation. All in all, a bit frustrating to run into these sorts of "regressions" - does anyone know what sort of drivers and such Ubuntu Light might have shipped with for this computer that made it work so well? Unfortunately, I wiped the disk in order to install the Desktop version of Ubuntu.

    Read the article

  • How to Save Tweet Links for Later Reading from Your Desktop and Phone

    - by Zainul Franciscus
    Have you come across a lot of interesting links from Twitter, but you don’t have the time to read all of them? Today we’ll show you how to read these links later from your desktop and phone. Organizing links from Twitter can be a troublesome, but these tools will reduce the effort greatly Latest Features How-To Geek ETC The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin View the Cars of Tomorrow Through the Eyes of the Past [Historical Video] Add Romance to Your Desktop with These Two Valentine’s Day Themes for Windows 7 Gmail’s Priority Inbox Now Available for Mobile Web Browsers Touchpad Blocker Locks Down Your Touchpad While Typing Arrival of the Viking Fleet Wallpaper A History of Vintage Transformers [Infographic]

    Read the article

  • PHP usage outside the web?

    - by Anto
    As you probably are aware, PHP is not only usable for web programming, but also desktop programming. It even has things such as GTK bindings. Do you have any examples of places where PHP is actually used outside web programming for anything more than just very trivial programs? Do you know of any desktop program which uses PHP to some extent (e.g. as Python could be used in a C program)? Note: I don't program in PHP myself, I'm just curious

    Read the article

  • Multithreaded UI desktop application issues

    - by igor
    I am involved into development a rich UI project: desktop windows application. Application uses asynchronous invocations and in its turn it should be ready to process external messages (events). The problem is clear: at first time it was built as a simple prototype and it was not stress tested and all was fine. Then application was grown: the number of calls to server and number of events from server are high and performance is low. What is more users noticed that sometimes performance is extremal low. Asynchronous invocations based on thread pool (BeginInvoke, EndInvoke), external events are going from WCF service (.NET 3.5). My goal is synchronization of all tasks and putting priorities to every executions in desktop application. My question is: is there any practice how to reach my goal: patterns, task priority list, others? What should I do at first, second and next times? Thanks

    Read the article

  • Multithreded UI desktop application issues

    - by igor
    I am involved into development a rich UI project: desktop windows application. Application uses asynchronous invocations and in its turn it should be ready to process external messages (events). The problem is clear: at first time it was built as a simple prototype and it was not stress tested and all was fine. Then application was grown: the number of calls to server and number of events from server are high and performance is low. What is more users noticed that sometimes performance is extremal low. Asynchronous invocations based on thread pool (BeginInvoke, EndInvoke), external events are going from WCF service (.NET 3.5). My goal is synchronization of all tasks and putting priorities to every executions in desktop application. My question is: is there any practice how to reach my goal: patterns, task priority list, others? What should I do at first, second and next times? Thanks

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >