Search Results

Search found 1935 results on 78 pages for 'digital signatures'.

Page 44/78 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• 3 Monitors powered from a Nvidia fx580

  - by user26067

  I have a NVidia FX580 card in a Dell Precision T1500. The outputs of the back of the card are DVI and 2x displayport. I tried to run 3 screens from the DVI + 2x displayport to dvi adaptors, but the card won't have it... It'll only run 2 of these screens at the same time. http://www.nvidia.com/object/product_quadro_fx_580_us.html says; **Display Support:** Dual Link DVI-I 1 DisplayPort 2 # of Digital Outputs 3 ( 2 out of 3 active at a time ) # of Analog Outputs 1 To me this reads that it will be able to power 2xdvi monitors and 1xvga monitor. Anyone care to confirm or speculate?

  Read the article

• RAIDZ vs RAID1+0

  - by Hiro2k

  Hi guys I just got 4 SSDs for my FreeNAS box. This server is only used to serve a single iSCSI extent to my Citrix XenServer pool and was wondering if I should setup them up in a RAIDZ or a RAID 1+0 configuration. This isn't used for anything in production, just for my test lab so I'm not sure which one is going to be better in this scenario. Will I see a major difference in speed or reliability? Currently the server has three 500GB Western Digital Blue drives and it's dog slow when I deploy a new version of our software on it, hence the upgrade.

  Read the article

• What type of Multimeter is safe to use on computers?

  - by Ssvarc

  In "Upgrading and Repairing PC's - 18th edition" by Scott Mueller on pg. 1278 he discusses multimeters. "You should only use a DMM (digital multimeter) instead of the older needle-type multimeters because the older meters work by injecting 9V into the circuit when measuring resistance, which damages most computer circuits. A DMM uses a much smaller voltage (usually 1.5V) when making resistance measurements, which is safe for electronic equipment." Most DMM's that I've looked at have 9V batteries. Are they internally stepping down the voltage used when making these measurements? Wouldn't the concern of injecting 9V be true when measuring continuity as well? A little off topic, there is a fascinating way to test for laptop screen inverter failure, (http://www.fonerbooks.com/test.htm), is anyone aware of a safe DMM that is capable of this as well?

  Read the article

• What is the deal with hard drive technology moving to 4K sectors, vs. 512 bytes? Are 4K sector disk

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• Dell e4300 Random Beeps

  - by Mikey.B

  I’ve noticed that my Dell e4300 Laptop will randomly beep every now and then. The symptoms are virtually identical to the issue described here: http://en.community.dell.com/support-forums/laptop/f/3518/t/19314488.aspx Any ideas why? I thought it might be related to hard drive activity so I downloaded the western digital disk utility and all tests check out fine. It’s not a big deal and it only beeps once every few days. I just want to make sure there isn’t a larger problem looming. =) -M

  Read the article

• What is the data transfer speeds within the disk, to other devices?

  - by Kumar

  I use Debian 6 on a HP Elitbook 6930 with 2Gigs of RAM. I was copying two AVI files, 1.5 GB in total, and noticed that the data copying was done at the rate of 4MB/sec. When I copy same AVIs to my Western Digital Passport 25G USB plugin drive the data transfer speed is 11+MB/sec. This speed is different if I plugin the drive to different USB ports. Interestingly, at work I also downloaded a 16MB IE8 exe on my virtual xp, run inside Oracle Sun Virtual Box, and it was downloaded AND saved within a second. We have a high speed network at work. :-) Why and how this difference in data speeds is possible?

  Read the article

• Self-powered USB hub and power supply adapter ampere capacity

  - by galacticninja

  I am looking for a power supply adapter for my USB Hub so it can support at least 2 bus-powered external hard drives. The hub's rating is 5 volts, 2 amperes. I would like to know if it would be OK to buy a power supply adapter rated at less than 2A. I've been looking for power supply adapters and the ones that do support 2A are more expensive (more expensive than the USB hub itself) compared to those that support less than 2A. Will power supply adapter that supports less than 2A (~1-1.5A) work fine to support two external hard drives? The external hard drives are both bus-powered Western Digital My Passport Essentials 250 GB. The OS is Windows XP SP3.

  Read the article

• Windows 8.1 killed notebook's wifi

  - by char1es

  Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

  Read the article

• MacBook Pro Boot Camp SPDIF passthrough?

  - by Ryan Zink

  I'm using Windows 7 through Boot Camp on a unibody Macbook Pro and am having problems using the SPDIF output. I get the expected Dolby Digital or DTS in some movies, but in other movies and in games (Source engine, StarCraft 2) where the output is enabled to 5.1, the output invariably shows up as Dolby Pro Logic, which means (I think) that passthrough is not enabled. The boot camp drivers for the sound card don't have any sort of control panel, and the Windows settings for enabling DTS and Dolby seem to work when I test those outputs in the sound settings. Is there some other setting or utility I can use to enable SPDIF passthrough for all programs?

  Read the article

• LSI RAID-on-chip with RAID6 over two SAS links goes red when HDD enclosure is powered cycled; how to recover?

  - by GregC

  I have a RAID6 array managed by LSI 9286-8e card. I also have Sans Digital 24-bay NexentaSTOR JBOD enclosure with SAS extender built-in. They are connected to separate UPS devices. Normally, I'd shut down the PC, leaving RAID6 in healthy state. But today the power to JBOD enclosure was cut but PC kept running. After restarting the PC, all disks in RAID6 have lit up RED, and the only option in LSI MegaRAID manager app was to reset each disk to unassigned, thereby loosing all data on RAID6 array. Thankfully, I am only testing, but how would I recover if this were to happen in production?

  Read the article

• What is the meaning of the two different recording icons used in Windows 7 Media Center?

  - by Lachlan Wetherall

  I am using Windows 7 Media Center with a digital TV tuner. If I am watching live TV and then use the mouse to bring up the control buttons at the bottom of the screen and press the record button once, then a single red circle 'recording' icon appears at the left side of the time slider. If I press the record button a second time, the 'recording' icon changes to a red circle with several shadowed circles fading off to the right. Pressing the record button a third time halts the recording. What is the meaning of the two different 'recording' icons?

  Read the article

• Which mediacenter appliance

  - by Guillaume

  I'm looking to buy a mediacenter appliance, but I am a bit lost by all the offers on the market. Here are the features I am looking for : at least 500Go HDD capable of playing HD (1080p) supporting a good range of video and audio codecs support for subtitles including a DVB-T input (coax) and tuner composite video input 5.1 (or 7.1) analog audio output LAN (100M or Gigabit) fileserver (SMB or NFS) remote control possibly digital output (S/PDIF, TOSLINK, or other) no need for integrated DVD player no need for wifi The Ultio Pro looks nice (http://www.thinkgeek.com/electronics/home-entertainment/d3fe). It just lacks a DVB-T input which is a show killer for me. Thanks for your suggestions.

  Read the article

• Why are they putting "processors" on hard drives?

  - by Celeritas

  What does it mean when they have a processor on the hard drive, how does it work, and what benfit does it have? I don't understand - the CPU is the processor and the hard drive transfers it's contents to RAM. Do have additional processors, preprocess the data some how? Here's some examples Western Digital WD Black WD1002FAEX 1TB "Dual processor speed" NETGEAR ReadyNAS 312 2-Bay Diskless Network Attached Storage "Dual-core Intel 2.1GHz processor and 2GB on-board memory" and routers now have processors too, why's that nescecary? I guess it sort of makes sense - some logic needs to happen for the packets to be read in to know which ports to send them out on, but why did old routers not need them? Example or wireless router with processor: "Dual-core processor"

  Read the article

• Windows 7 external 2.5 hard drive read write permissions format

  - by user76918

  Working with Windows 7 professional. While trying to format western digital 250GB sata laptop drive; receiving error not initialized. Went to elevated command line to diskpart to clean all; received error message write protected. Went to Disk Management & Virtual disk drive shows as disk 2 not initialized. No format options available greyed out. Went back to command line tried to see attributes disk is read only. How do I take owner ship to change the permissions & format.

  Read the article

• connect 2.1 stereo speakers to LG LCD-TV (5500 series)

  - by rMaero

  I bought a pair of speakers for my dad's TV, LG 32LE5500. When I installed them, it just sounded worse than the integrated ones and that's where I realized the subwoofer didn't work at all and both speakers make lower volume than the internal ones. The audio output jack says "H/P" (standing for headphones, and a matching symbol) before buying I checked this output with my phone's headphones and it worked so I figured it would work with a set of speakers since it's a standard audio output. I guess it's literally for headphones and not any other kind of sound players. There is only one other audio output and it is the optical-digital, so I can't use that. Not at least with these speakers.. am I screwed? or is there any workaround?

  Read the article

• Question regarding an NAS server and remote users

  - by JB

  I have a client that requires a massive amount of storage space but: Doesn't want to spend very much money Needs remote users (across the country) to be able to pull data from it and store to it, as well. Can this be done with an NAS Server such as the Western Digital Sharespace Network Storage System? I do not believe the client wants to spend over $1400 and HP is offering 8TB for $1299. Also, if anyone has any other ideas besides using NAS, please let me know. Thanks in advance for any help.

  Read the article

• Computer won't recognize second WD internal HD

  - by music man

  I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

  Read the article

• 1Tb disk formatted on Linux won't mount on windows nor mac

  - by Pedro MC

  I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

  Read the article

• OS X Headphone jack issue [closed]

  - by Alex Coady

  Possible Duplicate: Optical Audio out stuck on on a MacBook When I plug my headphones into my iMac (27-inch, Mid 2011; OSX 10.8.1) and try to adjust the volume, the volume popup shows a greyed out speaker and there's a circle with a line through it signalling that it isn't working. I've tried the headphones with my iPhone, other iMacs etc and they're fine. This is incredibly frustrating. Other headphones don't generally work either. In Sound preferences the headphones are being listed as "Optical digital-out port" which is incorrect and would explain the problem, but doesn't help me fix it. Any ideas?

  Read the article

• Can i enlarge os c drive of my windows 8?

  - by Sorgatz

  Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

  Read the article

• Using QoS to prioritize IP addresses

  - by Tristan

  I have a Western Digital N900 router. I was hoping I'd be able to throttle users based on their MAC address with it, which isn't possible sadly. Seems simple in principle though, duh. The battle against bandwidth hogging roomates rages on. Could I just set the local IP range to their IP, and then set the Local port range to every single port in existence. Then prioritize their IP to lower than mine? Will this work? What are all the ports? And what's the difference between Local and Remote IPs or Ports? Name: Roomate, Priority: Low, Protocol: TCP or UDP ??, Local IP Range: .101 to .101, Local Port Range: 0 to infinity, Remote IP Range: ? to ?, Remote Port Range: ? to ?

  Read the article

• Sound does not work on the administrator profile.Works on a non-administrator profile on Windows XP

  - by Sharjeel Sayed

  Initially I suspected a missing driver, but then sound ( for movies,songs etc ) works fine on the other non-administrator account, but does not work when I log in to the Administrator account. And yes..I have checked the sound volume and mute status as well. Details of my system OS: Windows XP Professional Service Pack 3 (build 2600) Processor: 2.00 gigahertz AMD Athlon 64 Memory: 448 Megabytes Usable Installed Memory Board: ASUSTeK Computer Inc. K8V-MX Bus Clock: 200 megahertz BIOS: American Megatrends Inc. 0112 07/18/2005 Multimedia: SoundMAX Integrated Digital Audio Any help would be appreciated.Thanks in advance

  Read the article

• Streaming video from a point-and-shoot camera that doesn't support it

  - by egasimus

  I have a Canon IXUS 120is (PowerShot SD940) - a nice digital camera that's a couple of years old. It does record fairly decent video, but, alas, can't function as a webcam - and I need to stream video over the Web. I've installed CHDK on it, and while it's quite flexible, doesn't seem to provide a solution to my problem. I suppose that the video footage is written to the SD card in real time - is there a hack that allows me to monitor the file as it is written, and broadcast its contents over the Internet? Perhaps connecting its the camera's slot to my laptop's card reader via SDIO? I'm running Windows, but I'm roughly familiar with Linux; another question has suggested a file-to-/dev/video driver - do such tools exist?

  Read the article

• Does HDMI cable "quality" actually affect transmission?

  - by TheDeeno

  I really don't want to pay a ridiculous price for a "name brand" HDMI cable if it doesn't really do anything for me. I'm just curious: now that most transmission is digital (packetized) is there such a thing as a "quality" cable? I suspect that if the cable works at all, I'm safe saying I have a quality connection. I just want to double check. Some of these reviewers complain that generic cables "create noise, lack bandwidth, can't handle X, etc". I'm skeptical of these reviews. If the logic for HDMI cables and quality can be applied to cables in general, please elaborate on that as well.

  Read the article

• HDMI vs Component vs VGA vs DVI vs DisplayPort

  - by Nazadus

  What is the real benefits of all of these? From what I can understand, HDMI offers the ability to send audio along the same cable as well as the ability to do progressive scan. I've Googled but I can't seem to find any real answers. Why would someone care to run 1280x1024 over HDMI or DVI instead of VGA? What about component? All I hear is one is digital and one is analog, but I can't find what that means from a feature/benefit stand point.

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >