Search Results

Search found 18363 results on 735 pages for 'external ip'.

Page 44/735 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

  • My IP seems to be blocked by web hosting server...

    - by shuxer
    Hi All I have a strange problem, i just installed my php web site on a shared hosting, all services were working fine. But after configuring my app i just could visit my web site only once, other attempts gives "The server is taking too long to respond.". But from other IP i can access, but only once, it seems all ip addressess beeing blocked after first visit(even ftp and other services get down, no access at all from the IP), can anyone help to explore this problem ? i don't think that it's my app problem, the app works fine on my local PC. Thanks.

    Read the article

  • How do I find the IP address of a GPRS modem?

    - by Hanno Fietz
    I want to pull data from a device that is accessed via a serial protocol and has a GPRS modem attached which should allow transparent access over an IP connection. It seems to me that this approach is upside down, because how should I know at which IP address the device currently is? Unfortunately, the device itself is rather dumb, so I can't make it send something to my server, which would reveal the current IP. For home routers on dialup lines, there's dynamic DNS services. Is there something equivalent in the mobile world? Each modem would, of course, have its phone number as a reliable address, but how does that help me? Practically all material on GPRS etc. that I can find online seems to be concerned with initiating the connection from the modem side, since that's what the system is designed for.

    Read the article

  • How to understand the functional programming code for converting IP string to a number?

    - by zfz
    In a python discusion, I saw a way to convert IP string to a integer in functional progamming way. Here is the Link . The function is implemented in a single line. def ipnumber(ip): return reduce(lambda sum, chunk: sum <<8 | chunk, map(int, ip.split("."))) However, I have few ideas of funcional programming. Could anybody explain the function in detail? I've some knowledg of "map" and "reduce". But I don't konw what "|" and "chunk" mean here? Thanks.

    Read the article

  • No external microphone Acer AO722

    - by Leeghwater
    The ACER AO722 comes with an external mic input, and this input is not recognised by Alsa mixer or Sound (in System Settings). There are various comments on this problem, but no real solutions. For example External Mic not working but Internal Mic works on an Acer Aspiron AO722. Using the internal mic is not an option, as I need to use skype professionally. I have tried everything in alsamixer (accessible through the Terminal Ctrl+Alt+t, command: alsamixer), and in Sound (under System Settings). I have also installed Pulseaudio. But to no avail. The headset is working normally under Skype in Windows. My AO722 came with Windows 7 on it, so I have installed Skype there too. My headset has separate connectors for ears and mic, and these go into the respective output and input on the right side of the laptop. This location: http://bernaerts.dyndns.org/linux/202-ubuntu-acer-ao722 sounds like an effective solution but it is for Ubuntu Natty 11.04. The solution suggested sounds drastic to me: replace the kernel 2.6.38-13 with version 2.6.38-12. I use Ubuntu 12.04, and my kernel is 3.2.0-30-generic-pae. Question: could I try this solution with Ubuntu 12.04? Is this a risky thing to do? I have found harware work around this problem. The audio output seems to be a combi output with also a microphone connection. I have made an adapter for this output. I used a 4 contacts 3,5 mm audio jack plug. To this plug I have soldered 2 female (common stereo) connectors, one for ears and one for the mic of my headset. The 4 contacts jack, which goes into the laptop (in audio OUTput) is wired as follows: tip = hot audio right; first sleeve after tip = hot audio left; second sleeve = common earth (for both ears and microphone); the 3rd sleeve = microphone signal input. In the connector which I could buy, the 3rd sleeve is not so much a sleeve, but part of the metal base of the connector; normally you would expect this one to be connect to earth. But connecting the mic signal to it works. Maybe ready made adapters of this kind and even headsets with a combi jack can simply be purchased; I didn't check. When I plug in the 4 contacts jack, Sound and Alsamixer immediately recognise an external microphone (even if no mic is connected to the adapter). In Sound, under the Input tab, 'Settings for internal microphone' changes into 'Setting for microphone'. The microphone comes through loud and clear, however there is a constant noise in the background. Others have reported this too. If I disconnect the external mic from the adapter, or shortcircuit the external microphone, the noise gets less but does not disappear. Therefore, it is not background noise from the room, but it comes from the computer itself. However, if you talk directly in the microphone of the headset, the noise level is acceptable for VOIP. The headset of my mobile phone Nokia C1 mobile comes wwith a 4 contacts combi 3,5mm jack plug. However, this one works (ear and mic) with the AO722 only if not inserted fully. Possibly the wiring of this headset jack is different. I cannot find detailed specs of the AO722, and don't know whether the audio 'output' was actually designed as a combi input/output. I have seen that at least one other AO model has a combi connector only. In any case, I do not believe that connecting your headset in this way will harm your computer. I would still appreciate a software solution. This must be possible, because the proper microphone input connector works under MS Windows.

    Read the article

  • External USB attached drive works in Windows XP but not in Windows 7. How to fix?

    - by irrational John
    Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

    Read the article

  • Microsoft , Hotmail , Live , MSN, Outlook , unable to send emails and no support received from microsoft in 3 months we are trying asking for that

    - by HugeNut
    Ok this is somenthing unbelievable, we have a website, users sign up and receives links to confirm they signed up BUT: 1 - microsoft blocked our IP (no one with microsoft email account can receive our emails) 2 - we tryed contacting microsoft submitting the detailed form about our problem 3 - we posted 3 times in their community about our problem 4 - we tweeted they about our problem 5 - we tryed finding out some telephone support number (the few there are arent' helping at all) Do you think we solved? the answer is NO :/ We still unable to send emails from our IP to microsoft email accounts, since 3 months back. Our emails are perfect we checked all the email headers following microsoft guidelines but it seems not enought, checking our IP reputation it seems everythings ok, indeed we can send email easly to any other provider , gmail, yahoo, etc Do you know any other way to try to get help ? FULL ERROR RETURNED BY MICROSOFT: host mx1.hotmail.com[65.55.37.120] said: 550 SC-001 (COL0-MC4-F28) Unfortunately, messages from 94.23.***** weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command) We are running NGIX + php mailer from a Virtual Private Server (No Hosting or shared hosting)

    Read the article

  • AWStats: Visits from IP address vs Crawlers

    - by user3651934
    I use AWStats in cPanel to see stats of my website. Under Hosts section I see one IP address that has visited 150 pages. I am not sure if one person would have visited 150 pages using a browser. But if these 150 pages have been visited using a software application, then should not it be listed under Robots/Spider section. So how do I determine if I should block a certain IP address that has visited several hundred pages of my website? Thanks

    Read the article

  • Question about Remote WAN IP on NetGear FVS336G VPN setup

    - by camilian
    I wanted to be able to have a VPN connection to my home network so I purchased the FVS336G because the reviews said it was easy set up. I am sure it is for someone that knows what needs to be entered it is easy, but I am a little confused. Using the VPN wizard I choose VPN Client as the tunnel connection, enter key, etc... but then I get to the "What is the remote WAN's IP or Internet Name" and "What is the local WAN's IP address or Internet Name" I am lost. I am probably being really dumb, but I am not sure what I need to put in here. Is the remote WAN ip the ip from the outside world to my cable modem? Is the local ip the ip to my FVS336G? Any help would be appreciated.

    Read the article

  • Forwarding udp ports iptables packets "lost"?

    - by Dindihi
    I have a Linux router (Debian 6.x) where i forward some ports to internal services. Some tcp ports (like 80, 22...) are OK. I have one Application listening on port 54277udp. No return is coming from this app, i only get Data on this port. Router: cat /proc/sys/net/ipv4/conf/all/rp_filter = 1 cat /proc/sys/net/ipv4/conf/eth0/forwarding = 1 cat /proc/sys/net/ipv4/conf/ppp0/forwarding = 1 $IPTABLES -t nat -I PREROUTING -p udp -i ppp0 --dport 54277 -j DNAT --to-destination $SRV_IP:54277 $IPTABLES -I FORWARD -p udp -d $SRV_IP --dport 54277 -j ACCEPT Also MASQUERADING internal traffic to ppp0(internet) is active & working. Default Policy INPUT&OUTPUT&FORWARD is DROP What is strange, when i do: tcpdump -p -vvvv -i ppp0 port 54277 I get a lot of traffic: 18:35:43.646133 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.652301 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.653324 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.655795 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.656727 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.659719 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 tcpdump -p -i eth0 port 54277 (on the same machine, the router) i get much less traffic. also on the destination $SRV_IP there are only a few packets coming in, but not all. INTERNAL SERVER: 19:15:30.039663 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.276112 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.726048 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 So some udp ports are "ignored/dropped" ? Any idea what could be wrong? Edit: This is strange: The Forward rule has data packets, but the PREROUTING rule has 0 packets... iptables -nvL -t filter |grep 54277 Chain FORWARD (policy DROP 0 packets, 0 bytes) 168 8401 ACCEPT udp -- * * 0.0.0.0/0 192.168.215.4 state NEW,RELATED,ESTABLISHED udp dpt:54277 iptables -nvL -t nat |grep 54277 Chain PREROUTING (policy ACCEPT 405 packets, 24360 bytes) 0 0 DNAT udp -- ppp0 * 0.0.0.0/0 my.external.ip udp dpt:54277 state NEW,RELATED,ESTABLISHED to:192.168.215.4

    Read the article

  • Windows CE: Changing Static IP Address

    - by Bruce Eitman
    A customer contacted me recently and asked me how to change a static IP address at runtime.  Of course this is not something that I know how to do, but with a little bit of research I figure out how to do it. It turns out that the challenge is to request that the adapter update itself with the new IP Address.  Otherwise, the change in IP address is a matter of changing the address in the registry for the adapter.   The registry entry is something like: [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms\TcpIp]    "EnableDHCP"=dword:0    "IpAddress"="192.168.0.100"     "DefaultGateway"="192.168.0.1"    "Subnetmask"="255.255.255.0" Where LAN90001 would be replace with your adapter name.  I have written quite a few articles about how to modify the registry, including a registry editor that you could use. Requesting that the adapter update itself is a matter of getting a handle to the NDIS driver, and then asking it to refresh the adapter.  The code is: #include <windows.h> #include "winioctl.h" #include "ntddndis.h"   void RebindAdapter( TCHAR *adaptername ) {       HANDLE hNdis;       BOOL fResult = FALSE;       int count;         // Make this function easier to use - hide the need to have two null characters.       int length = wcslen(adaptername);       int AdapterSize = (length + 2) * sizeof( TCHAR );       TCHAR *Adapter = malloc(AdapterSize);       wcscpy( Adapter, adaptername );       Adapter[ length ] = '\0';       Adapter[ length +1 ] = '\0';           hNdis = CreateFile(DD_NDIS_DEVICE_NAME,                   GENERIC_READ | GENERIC_WRITE,                   FILE_SHARE_READ | FILE_SHARE_WRITE,                   NULL,                   OPEN_ALWAYS,                   0,                   NULL);         if (INVALID_HANDLE_VALUE != hNdis)       {             fResult = DeviceIoControl(hNdis,                         IOCTL_NDIS_REBIND_ADAPTER,                         Adapter,                         AdapterSize,                         NULL,                         0,                         &count,                         NULL);             if( !fResult )             {                   RETAILMSG( 1, (TEXT("DeviceIoControl failed %d\n"), GetLastError() ));             }             CloseHandle(hNdis);       }       else       {             RETAILMSG( 1, (TEXT("Failed to open NDIS Handle\n")));       }   }       int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR    lpCmdLine, int       nCmdShow) {     RebindAdapter( TEXT("LAN90001") );     return 0; }   If you don’t want to write any code, but instead plan to use a registry editor to change the IP Address, then there is a command line utility to do the same thing.  NDISConfig.exe can be used: Ndisconfig adapter rebind LAN90001    Copyright © 2012 – Bruce Eitman All Rights Reserved

    Read the article

  • Relay thru external SMTP server on Exchange 2010

    - by MadBoy
    My client has dynamic IP on which he hosts Exchange 2010 with POP3 Connector running and gathering emails from his current hosting. Until he gets static IP he wants to send emails out. This will work most of the time but some servers won't accept such email sent by Exchange (from dynamic ip due to multiple reasons) so I would like to make a relay thru external SMTP server which hosts current mailboxes. Normally SMTP server could be set up to allow relay thru it but this would require static IP to be allowed on that server so it would know which IP is allowed to relay thru it. Or is there a way to setup relay in Exchange 2010 so it can use dynamic IP and kinda authenticates with user/password itself on the hosted server?

    Read the article

  • make vnc server listen on guest's ip address

    - by gucki
    My host system has the IP 192.168.0.250. Now I want to create a kvm guest using a tap device (so the network card of the guest just acts like a "real" one). The guest has a static ip 192.168.0.249 which it setups on his own (no dhcp). To connect to the guest using VNC I can to use the host's IP. So far everything works fine. Now I wonder how I can make the VNC server to listen on the guest's IP address, so I can use the guest's IP address to connect using my vnc client. Of course I cannot use -vnc 192.168.0.249:1 as this IP is not active on the host and so fails with Cannot assign requested address. Can this be done with tap networking at all? If not, how to get it working?

    Read the article

  • Big mail issue two ip address

    - by Luka
    I have two ip addresses on my server, First IP is assigned to my clients, second is assigned to me. Issue started today. My clients can not send mail via php from their ip address (shared ip address which are all of them using). Server is refusing it with error ERROR: Password not accepted from server: 535 Incorrect authentication data But via their desktop mail clients it can send mail, when they use my ip address for hostname (second ip of server assigned to me) they can send mail. help.

    Read the article

  • Google Analytics Goal tracking external referrals

    - by user1561108
    I have goal tracking setup on my site for a target url. It works insofar as it tracks all pageviews on my site leading up the goal. But it doesn't appear to be tracking the external referrer that the user came from initially, marking it as (entrance) and the step before that (not set). Is this standard behaviour for goals not to record external referrer and how can I add referrer tracking to my goal?

    Read the article

  • Replies to request coming over a relay goes to relay's internal IP, not to original request's source IP

    - by seaquest
    Dhcpd running on Linux gets a dhcp request over dhcrelay which is running on other remote machine. Oct 6 10:09:46 2012 dhcpd: DHCPDISCOVER from 00:1e:68:06:eb:37 (oguz-U300) via 172.16.17.81 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes 10:35:01.112500 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.0.81.67 > 192.168.0.1.67: BOOTP/DHCP, Request from 00:1e:68:06:eb:37, length: 300, hops:1, xid:0xe378fc7e, flags: [none] (0x0000) Gateway IP: 172.16.17.81 Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] It matches to a subnet and send reply. However reply does not go to the requesting dhcrelay external IP(192.168.0.81). Instead, it goes to the internal interface IP of machine running dhcrelay. And I think because of this remote machine running dhcrelay or the dhcrealy itself discarding packet. Oct 6 10:09:46 2012 dhcpd: DHCPOFFER on 172.16.17.11 to 00:1e:68:06:eb:37 (oguz-U300) via 172.16.17.81 10:35:02.050108 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.0.1.67 > 172.16.17.81.67: BOOTP/DHCP, Reply, length: 300, hops:1, xid:0xe378fc7e, flags: [none] (0x0000) Your IP: 172.16.17.11 Gateway IP: 172.16.17.81 Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] Is this a normal behaviour? Machine running dhcrelay: eth1(ext) Link encap:Ethernet HWaddr 00:90:0B:21:43:F4 inet addr:192.168.0.81 Bcast:192.168.0.255 Mask:255.255.255.0 eth2(int) Link encap:Ethernet HWaddr 00:90:0B:21:43:F5 inet addr:172.16.17.81 Bcast:172.16.17.255 Mask:255.255.255.0 3582 ? Ss 0:00 /usr/sbin/dhcrelay -i eth2 192.168.0.1 Machine running dhcpd: eth1 Link encap:Ethernet HWaddr 00:90:0B:23:97:D1 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 option domain-name "test.com"; option subnet-mask 255.255.255.0; authoritative; ignore client-updates; ddns-update-style ad-hoc; default-lease-time 86400; max-lease-time 86400; subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.135 192.168.0.169; option broadcast-address 192.168.0.255; option domain-name-servers 192.168.0.1; option domain-name "test.com"; option routers 192.168.0.1; } subnet 172.16.17.0 netmask 255.255.255.0 { local-address 192.168.0.1; server-identifier 192.168.0.1; range 172.16.17.10 172.16.17.11; option broadcast-address 172.16.17.255; option routers 172.16.17.81; } (I put local-address and server-identifier. But this does not help ) Regards, -- Oguz YILMAZ UPDATE: The first problem is found. I have configured dhcrelay only on listening internel interface. It seems (of course) is should also listen to external interface for replies. It appears it is not important where the packet destined to. dhrelay will forward it to internal net. HOWEVER, I have deleted route on dhcpd server to reach 172.16.17.x subnet. It again tries to send reply to 172.16.17.81. Because it does not know the route it send it from default gateway to the internet. eth0: IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.1.2.67 > 172.16.17.81.67: BOOTP/DHCP, Reply, length: 300, hops:1, xid:0x32830125, secs:3, flags: [none] (0x0000) eth0: Your IP: 172.16.17.11 eth0: Gateway IP: 172.16.17.81 eth0: Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] How can I force dhcpd to force to send replies to requesting IP? Because, it is not much meaningful to add routes to subnet we distribute IP for. Internet - dhcpd - 192.168.0.1 - SOMENET - 192.168.0.81 - dhcrelay - 172.16.17.0/24 192.168.0.1 has no route for 172.16.17.0 and has no interface directly attached to that net.

    Read the article

  • SEO best practices for a web feature that uses geolocation by IP Address

    - by Nick
    I'm working on a feature that tailors content based on a geo location lookup by IP address in order to provide information based on the general area where this visitor is from. I'm concerned that content will be interpreted as focused solely on the search engine spider's geo origin when it is indexed. Are there SEO best practices for geo location by ip address features? I appreciate any specific tips or words of wisdom.

    Read the article

  • Lost contact with my NAS after changing its IP

    - by Beles
    I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

    Read the article

  • Adding a second IP address for IIS - static vs dynamic A records

    - by serialhobbyist
    I'm looking to add a second IP address to IIS so that I can run two sites with different SSL certificates. When I added one on my play box and ran ipconfig /registerdns both addresses were registered in DNS with the server's name. So, I deleted the A record for the new IP address and rebooted. That also registered both names. So, then I went into the network config for the adapter and, on the DNS tab, unchecked "Register this connection's addresses in DNS". I deleted the A record for the new IP address again and re-ran ipconfig /registerdns. This time, it deleted the A record for the old IP address and didn't created one for the new address. Neither of these is what I want: I want the main IP address to be registered and refreshed automatically as a dynamic DNS record and the second IP address to be registered and managed as a static address. Is there any way to achieve this?

    Read the article

  • Geforce GT240M: How to disable Notebook screen and enable external Monitor

    - by bdr529
    When i attach my Notebook (Nvidia Geforce GT 240M) to my Panasonic-TV via HDMI, both screens are activated. I use Nvidia-Driver Version 260.19.06. I wonder how to deactivate my notebook display automatically or with one Script and switch to the external Monitor when attached. The TV needs an overscan-correction of 100px to display the whole screen. I also want to close the notebook without deactivating the external monitor, what still happens now. Is this possible?

    Read the article

  • how to restrict wampserver access to certain ip addresses

    - by user28233
    What do I need to do in order to restrict the access to my wamp server to certain ip addresses. Just imagine that the my ip address is the ip address that I only want to have access I tried to edit the .htaccess # This folder does not require access over HTTP # (the following directive denies access by default) Order allow,deny Allow from 112.203.229.44 and the phpmyadmin.conf: Alias /phpmyadmin "E:/wamp/apps/phpmyadmin3.2.0.1/" # to give access to phpmyadmin from outside # replace the lines # # Order Deny,Allow # Deny from all # Allow from my ip address # # by # # Order Allow,Deny # Allow from my ip address # <Directory "E:/wamp/apps/phpmyadmin3.2.0.1/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from my ip address </Directory>

    Read the article

  • Why my dns server ip got blacklisted instead of my email server ip?

    - by Khurram Masood
    We are hosting our own dns server our scenario is as under; dns ip: a.b.c.1 fqdn:ns1.example.com ------ reverse lookup to a.b.c.1 mail server ip a.b.c.2 mail.example.com ------ reverse lookup to a.b.c.2 smtp.example.com ------ no reverse lookup pop.example.com ------ no reverse lookup web server ip a.b.c.3 example.com ------ reverse lookup to a.b.c.3 www.example.com ------ no reverse lookup a few days back our dns server ip got blacklisted and all our services were down from outside. We had also added a new dns server on a separate network that caused our domain and machines with same names as above to resolve on different ips, can this b a cause of being blacklisted? But all blacklists points towards spamming. Can anyone please explain why my dns ip got blacklisted instead of my email or web server ip?

    Read the article

  • Google Analytics: Block Your Dynamic IP Visits?

    - by 4thSpace
    I have a dynamic IP, which doesn't work for Google Analytics IP filtering. I read this post How to excludes my visits from Google Analytics? but don't see any code for setting the variable mentioned there. Has anyone been able to block their website visits from Google Analytics using a cookie? EDIT: This seems to work https://tools.google.com/dlpage/gaoptout. Although I don't think it was designed as I'm using it.

    Read the article

  • Blocking IP's Nginx behind proxy

    - by FunkyChicken
    I'm running a Nginx 1.2.4 webserver here, and I'm behind a proxy of my hoster to prevent ddos attacks. The downside of being behind this proxy is that I need to get the REAL IP information from an extra header. In PHP it works great by doing $_SERVER[HTTP_X_REAL_IP] for example. Now before I was behind this proxy of my hoster I had a very effective way of blocking certain IP's by doing this: include /etc/nginx/block.conf and to allow/deny IP's there. But now due to the proxy, Nginx sees all traffic coming from 1 IP. Is there a way I can get Nginx to read the IP's like how PHP does, with the X-REAL-IP header?

    Read the article

  • Using an Internal HDD as an External HDD also or an External HDD for installing SAP ?

    - by Asterix
    Is it possible and advisable to use an Internal Hard Drive as an External Hard drive also. I wanted to install SAP ECC 6 on my system which has only 250 GB but atleast 300 GB is required.I wanted to buy an External Drive first, then I heard loading SAP on an External would make it extremely slow. I'll be using it only as a beginer so even if it is a little slow i don't mind. Is it feasible to run such a big application from an External Hard disk ? So can i purchase a 500 or 1 TB Internal Hard disk and use it as an External too by fitting it with the necessary USB 3.0 Hard drive cases and cables ? or should i purchase a External and load SAP onto it ? Thank you.

    Read the article

  • NETSH : Set default ip address for an interface with multiple Ips

    - by elarichi.y
    To test a load balancer I need to switch my ip address several time a day, and keep other ips routing trough other Wans. I run these commands in a batch script: netsh interface ip set address "Connexion au réseau local" static %ipd% 255.255.255.0 192.168.1.1 1 netsh in ip add address "Connexion au réseau local" %ips1% 255.255.255.0 netsh in ip add address "Connexion au réseau local" %ips2% 255.255.255.0 ipd: is the default ip I want to set (all traffic should go trough it). ips1 and ips2 : are the secondary ips I want to keep but what ever I do all traffic goes trough one IP !! (first one in the range) Please help me with this issue.

    Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >