Search Results

Search found 2692 results on 108 pages for 'ignore'.

Page 44/108 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• How do I setup unison to sync a folder one way

  - by Rob

  I have a 1tb NAS that has a 1tb usb external hard attached I have prepared the file system on the usb disk and mounted it I want to 100% sync my data from my nas to the usb disk - but I want it to be incremental and only have the NAS as the 'master' - eg if a file changes on the usb external hard drive I want it to ignore this change as its not the live version (not that I think the files will change on the usb disk but im paranoid the live could get overwritten) Also if a file gets deleted on live I want to retain the deleted file on the usb disk Can unison sync one-way and achive the above for me? if so with simply unison sorce/ target/ Work? Thanks Rob

  Read the article

• Bad temperature sensors on Foxconn motherboard?

  - by Gawain

  I have a system with a Foxconn V400 series motherboard and AMD Athlon 3000+ processor. Ever since I got it a few years ago the fans (particularly the CPU fan) have been really loud. So recently I installed SpeedFan to see why they were running so fast. SpeedFan reported the CPU temperature to be 32C, and one motherboard sensor at about 26C. But the other two motherboard sensors were reporting 78C and 64C respectively. Naturally the fans were both maxed out because of this, with the CPU fan at 5800rpm and the case fan at 2400rpm. I opened the case and everything inside was literally cool to the touch, with the exception of the CPU heatsink which was slightly warm, but nowhere near 78C. It seems like the temperature sensors are either defective or being read incorrectly. Is there some way I can decrease my fan noise without risking damage to my processor? Some way to ignore those two temp sensors? Any help would be greatly appreciated.

  Read the article

• Mountain Lion fails to connect to Windows share after the connection is interrupted

  - by T Reddy

  I have a Windows 7 share that my Mountain Lion Macbook Pro connects to. The windows share is simply a user account. For whatever reason, when my connection gets interrupted, the mac will show a dialog stating as such and will ask me to ignore or disconnect. From this point forward, I cannot re-establish the connection from the mac to the windows share (even if I reboot the mac). I always have to reboot the windows machine in order for my mac to see the share again. My Windows share is my media center, so I'm not always able to reboot the machine because it is recording TV. Has anybody else encountered this problem and if so how is it resolved?

  Read the article

• Way to update / refresh / reschedule project plan after adding a vacation / changing calendar

  - by CodeCanvas

  I had created a project plan using MS-Project 2010 (not server). I had set the task schedule mode to "Auto Scheduled" and entered the necessary tasks. Since it is a single person project I also added one person to the Resource of the file and assigned that resource to all the tasks and leveled the project. After the plan was put in and tasks were leveled I figured the calendar was not correctly set (in UAE the weekend is Friday and Saturday instead of Saturday and Sunday). So, I updated the default calendar (Standard) of the project by going to Project-Change Working Time-Work Weeks and changed them as needed. But after doing this, the tasks are still scheduled over Friday and Saturday even though I have marked them as nonworking days in the standard calendar. I tried the following for the tasks to refresh, but I was not successful: Updated all tasks to use the "Standard" calendar in the project Selected option so that tasks do not ignore resource calendars Added a constraint "As Soon As Possible" Executed "Level All" Any help on solving this issue would be much appreciated, thanks in advance.

  Read the article

• Change popup format for Kopete in Gnome (Ubuntu 10.04)

  - by HorusKol

  After trialling Empathy which was included with Gnome/Ubuntu 10.04 I decided to go back to Kopete since I was losing chat messages. However, for some reason, Kopete is now displaying all popups in a big, ugly window with four options (ok, cancel, view, ignore, or something like that) that actually all seem to do nothing. I tried looking for options in Kopete to change the popup style to the nicer Gnome style one which goes up in the top-right of my desktop, but it doesn't seem to be possible with this release. So I had to resort to removing all popup messages from Kopete to prevent my screen being taking over by a popup requiring action for every incoming chat message. Unfortunately, this now means that I do not get any notifications when people message me - and so I can go a couple of hours without realising that they did. Anyone know how to get the nice, unobtrusive popups working in this version?

  Read the article

• xkb layouts not working (in KDE?) after upgrade from Ubuntu 9.10 to 10.04

  - by Alan

  I customised my keyboard layout in 9.10 by editing the appropriate /usr/share/X11/xkb/symbols/ file. After upgrading to 10.04 I noticed it had overwritten all my modifications, so I recovered the layout and overwrote the symbol file's base entry. Sadly KDE (and, presumably, the entire OS) seems to ignore the files altogether. The help files don't mention anything about modifying layouts anyway (and the layout switcher seems to be using setxkbmap, which uses the above path according to its man page), so I'm at a bit of a loss. Do I need to compile this into some other format somehow or how do I get it to work?

  Read the article

• Nginx Forward SSL for single site

  - by Will.brown

  I have a nginx server setup and it works fine for http however i would like to bypass the proxy for https connection. I want it so that when someone goes to my ip https:// ip1 (Nginx server) it bypasses ngix and forwards all traffic to https:// ip2(webserver) i do not need ngix to do this for any ssl website just one particular website. SO Client to https:// ip1 to https:/ /ip2 to https:// ip1 to client pc I just want the nginx to not intercept the connection and forward it on and on return forward the connection to client Im guessing i do this by nat mascarade buy not exactly sure how to do it and if i will need to tell nginx to ignore ssl aswell can someone help me please this has gone me stuck

  Read the article

• debian - running unattended-upgrades on a particular day of the week

  - by dastra

  We're running unattended-upgrades on debian squeeze, and would like it to run once a week, only on a Wednesday morning. To attempt this, we have set: APT::Periodic::Unattended-Upgrade "7" in /etc/apt/apt.conf.d/50unattended-upgrades And then touched the /var/lib/apt/periodic/update-stamp to set the timestamp to a Wednesday, for instance: touch -t 201211280000 /var/lib/apt/periodic/update-stamp Running: stamp=$(date --date=$(date -r /var/lib/apt/periodic/update-stamp --iso-8601) +%s 2/dev/null) date -u --date="1970-01-01 $stamp sec GMT" Gives the correct timestamp: Wed Nov 28 00:00:00 UTC 2012 However, unattended-upgrades then seems to ignore this, and run the updates on a Saturday morning. Could anyone enlighten me as to how this parameter works, and how to set up upgrades to run on a Wednesday?

  Read the article

• What does the arxiv.org anti-bot "search and destroy" actually do?

  - by Brian Campbell

  The lanl.arxiv.org math and scientific preprint service (formerly known as xxx.lanl.gov) has a strict policy against bots that ignore its robots.txt, Robots Beware. On that page, the have a link labelled with "Click here to initiate automated 'seek-and-destroy' against your site", which is forbidden by their robots.txt but presumably badly behaved robots will follow it, and reap the consequences. The question, what are the actual consequences? I have never had the guts to actually click on that link to see what it does. What can they be doing that is both effective and legal?

  Read the article

• Outlook 2010 exchange setup prompts for [email protected] rather than [email protected]

  - by Force Flow

  We use a hosted exchange service. When users want to set up Outlook 2010 to access their account, they open Outlook and run through the configuration steps. Autodiscover is enabled, and in the user's active directory profile, their email address is in the email field. However, when the configuration process reaches a point where they are prompted for their email account's username and password, their active directory username is filled in by default instead of their email address. Is there a way to fix that? Users get confused and try to enter their email password over and over again and wonder why it doesn't work (and completely miss/ignore the "use another account" button even though they have instructions right in front of them). I'm also using the Office 2010 ADM's in group policy, but I haven't yet seen an option to specify what gets auto-populated in that windows security prompt.

  Read the article

• Is it safe to delete "Account Unknown" entries from Windows ACLs in a domain environment?

  - by Graeme Donaldson

  It's not uncommon to see entries in Windows ACLs (NTFS files/folders, registry, AD objects, etc.) with the name "Account Unknown (SID)". Obviously these are because of old AD users or groups which at some point had permissions manually configured on the relevant object and have since been deleted. Does anyone know if it is safe to remove these "Account Unknown" ACEs? My gut feeling is that it should be just fine, but I'm wondering if anyone has any past experiences where doing this has caused trouble? Normally I just ignore these, but the company I'm working at now seems to have an abnormal number of these, most likely due to past admins' inexperience with AD/Windows and assigning permissions to user accounts rather than groups in all sorts of weird places. FWIW, our environment is not complex, a single domain forest, 4 DCs in 3 sites, with all network connectivity and replication healthy, so I'm certain that these "Account Unknown" entries are really old accounts, and not just because of some failure to resolve the SID to a human-readable name.

  Read the article

• How to statically configure DNS servers on a Cisco router when the WAN interface uses DHCP?

  - by Massimo

  I have a Cisco router (model 887VA, IOS 15.4) used to connect a LAN to the Internet via ADSL. The WAN interface uses DHCP: interface ATM0.1 point-to-point ip address dhcp I need the router to use a statically-defined DNS server for name resolution: ip name-server A.B.C.D However, the router insists on using the DNS servers supplied by the ISP via DHCP: Router#ping www.google.com Translating "www.google.com"...domain server (<ISP DNS>) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 173.194.116.208, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms How can I tell the router to ignore the ISP-supplied DNS servers and only use the statically-configured one?

  Read the article

• Known Hosts ECDSA Host Key Multiple Domains on One IP

  - by Jonah

  Hello, world!, I have a VPS set up with multiple domain names pointing to it. Arbitrarily, I like to access it via SSH through the domain name I'm dealing with. So for example, if I'm doing something with example1.com, I'll log in with ssh [email protected], and if I'm working with example2.com, I'll log in with ssh [email protected]. They both point to the same user on the same machine. However, because SSH keeps track of the server's fingerprint, it tells me that there is an offending host key, and makes me confirm access. $ ssh [email protected] Warning: the ECDSA host key for 'example2.com' differs from the key for the IP address '123.123.123.123' Offending key for IP in /home/me/.ssh/known_hosts:33 Matching host key in /home/me/.ssh/known_hosts:38 Are you sure you want to continue connecting (yes/no)? Is there a way to ignore this warning? Thanks!

  Read the article

• customized xkb layouts not working (in KDE?) after upgrade from Ubuntu 9.10 to 10.04

  - by Alan

  I customised my keyboard layout in 9.10 by editing the appropriate /usr/share/X11/xkb/symbols/ file. After upgrading to 10.04 I noticed it had overwritten all my modifications, so I recovered the layout and overwrote the symbol file's base entry. Sadly KDE (and, presumably, the entire OS) seems to ignore the files altogether. The help files don't mention anything about modifying layouts anyway (and the layout switcher seems to be using setxkbmap, which uses the above path according to its man page), so I'm at a bit of a loss. Do I need to compile this into some other format somehow or how do I get it to work?

  Read the article

• compare the contents of two folders that are replicating by dfs

  - by Funky Si

  I have a large folder that I am replicating by dfs and I want to check that all files have been replicated correctly. Currently I am running the following script at both ends. cd e:\data\shared\ dir /a:-h /b /s > e:\data\shared\result.txt and then using a text editor to tidy the file before using a diff tool to compare them. Does anyone know a better way of doing this? Failing that does anyone know how to adapt my script to ignore all the files in the DfsrPrivate folders

  Read the article

• Disable pop-up for "Faulting application" on login - Windows Server 2003

  - by Mikael Svenson

  I have a service running on a Windows 2003 server. The service executes a .exe file to process some data. Sometimes the .exe crashes due to incorrect input and it logs an error to the Application Log which is fine. If I remote login to the server I get a pop-up of the .exe file crash, for each crash which has occured since I last logged in. The crashes can safely be ignored and I'd like to ignore these pop-ups. Is there a way to disable these pop-ups?

  Read the article

• Samsung i780 networking problem

  - by Infinity

  Hello guys! Maybe this is not the right place to ask this, but I give a try for it. Please don't rate it down, just ignore it if you don't like. So I have a Samsung i780 mobile phone and I would like to use the internet through my wireless router. I have connected to it. I got an IP address. My laptop is also connected to the same wireless network and I can ping the mobile phone and I get answer. When I open the internet explorer and enter an address it says that it cannot connect to the internet. I have googled very much, but can't find the problem. What do you think, what is the solution?

  Read the article

• ACL and moving files in Nautilus

  - by MyOnlyEye

  When I move files from a private home directory (e.g. /home/jack) to a shared directory (e.g. /home/shared-school) Nautilus copies the file permissions from the original file into the shared directory - and ignores the ACL that I've put in the /home/shared-school directory (e.g. setfacl -R -m d:g:school:rwx /home/shared-school). Is it possible to force Nautilus to change ACL on a file that is moved or copied - or not to ignore the ACL on the directory where the files are moved or copied?

  Read the article

• Set up simple reverse proxy using IIS

  - by Ropstah

  I would like to reverse proxy my Jira installation on a Windows server 2008 machine. Jira is running under: http://jira.domain.com:8080/ and is accessible as such. The machine also runs IIS for hosting several ASP.NET websites. I followed instructions here: http://blogs.iis.net/carlosag/archive/2010/04/01/setting-up-a-reverse-proxy-using-iis-url-rewrite-and-arr.aspx and installed URL rewrite and ARR. I now have a “Web farm” node in my IIS instance but I’ve got no idea on how to proceed. I tried adding some rules but this made the rest of my IIS websites stop responding. Is there a simple way to say: 1. Forward http://jira.domain.com to http://localhost:8080 2. Ignore other domains and route them as usual Any help is greatly appreciated!

  Read the article

• Why is ntpd not updating the time on my server?

  - by John

  I have ntpd running on my server. It's all the default settings, except I commented out its ability to be a server to other machines: # restrict -4 default kod notrap nomodify nopeer noquery # restrict -6 default kod notrap nomodify nopeer noquery restrict default ignore If I run ntpdate -q ntp.ubuntu.com, I'm told that my machine's clock is off by 7 seconds. What's going on? How can I diagnose what's happening, is there a log I can turn on? more info #1 # ntpq -np remote refid st t when poll reach delay offset jitter ============================================================================== 91.189.94.4 193.79.237.14 2 u 30 64 7 108.518 -0.136 0.361 more info #2 Here's what this looked like when I asked the question: # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 7.191308, delay 0.13310 10 Jan 20:38:09 ntpdate[31055]: step time server 91.189.94.4 offset 7.191308 sec And here's what it looks like now, after restarting ntpd a couple times (I'm assuming that's what fixed it): # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 0.000112, delay 0.13164 10 Jan 20:47:03 ntpdate[31419]: adjust time server 91.189.94.4 offset 0.000112 sec

  Read the article

• How to add a Mac to Windows Active Directory

  - by Ben Daniel

  I've gone into the Directory Utility on the mac, clicked on the services tab, entered the Active Directory Domain and Computer ID, clicked the Bind button and it showed a little status label which flickered through 5 of 5 steps and then said "An unknown error occurred". If I ignore the error and just click the OK button further down the screen and make sure the Active Directory service is ticked in the list of services, then go to the Directory Servers tab and try to add an Active Directory by entering my ad domain, computer id, admin username and password I get an error "Unable to add the domain. An unexpected error of type -14090 (eDSAuthFailed) occurred." Any ideas?

  Read the article

• Installing Oracle Client 11.1.0.7 on Windows Server 2008 64-bit. What does "Install Location" and "S

  - by Anders

  I am trying to install Oracle Client 11.1.0.7 on a Windows Server 2008 64-bit. To some this might not be rocket science but I can't understand what the options under the install screen "Specify Home Details" mean. The defaults given suggest that I use Oracle Base and install software under my own account name. It also suggests that each user should have a separate Oracle Base. This seems counter intuitive to me. I am doing a server install after all. All I want to use the installation for is to connect to an Oracle Database from Reporting Services. Can I safely ignore this and just accept the defaults? What are the implications if I change the location to a common directory?

  Read the article

• Change popup format for Kopete in Gnome (Ubuntu 10.04)

  - by HorusKol

  After trialling Empathy which was included with Gnome/Ubuntu 10.04 I decided to go back to Kopete since I was losing chat messages. However, for some reason, Kopete is now displaying all popups in a big, ugly window with four options (ok, cancel, view, ignore, or something like that) that actually all seem to do nothing. I tried looking for options in Kopete to change the popup style to the nicer Gnome style one which goes up in the top-right of my desktop, but it doesn't seem to be possible with this release. So I had to resort to removing all popup messages from Kopete to prevent my screen being taking over by a popup requiring action for every incoming chat message. Unfortunately, this now means that I do not get any notifications when people message me - and so I can go a couple of hours without realising that they did. Anyone know how to get the nice, unobtrusive popups working in this version?

  Read the article

• Trying to make changes to the size of the events buffer in prelude-ids auditd plugin

  - by tharris

  I am running systems using the prelude-ids plugin for auditd. When the manager is up every thing works fine however I have a requirement that when the clients can't talk to the manager they should store no more than 250MB of messages, and when they hit that point they should start deleting the oldest events. All I can find is that audispd can be set to an overflow action of ignore,syslog,suspend,single, and halt none of which meet my requirement, and several of which I really cannot use. Does anyone know a way to do this? I know the events get stored in /var/spool/prelude/auditd/global, but I can't find anything about configuring how things are stored here. There are usually several files in the global directory but only 2 of them ever go above 0 in size, data0 and data0.journal.

  Read the article

• IE won't load directly-linked PNGs

  - by Johannes Rössel

  I remember having this issue in the past with previous versions as well but recently it started here again. Whenever I click a link that links directly to a PNG image I get a download dialog; the browser won't display it on its own. Inline PNGs are fine, though. Any ideas what causes this? It did work in the past. Preemptive warning: I'm not looking for advice to change my browser; I'm looking for a solution to a specific problem with one piece of software. Just ignore the fact that it may have religious importance.

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >