Search Results

Search found 53222 results on 2129 pages for 'name servers'.

Page 44/2129 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• SPF for two different outgoing servers?

  - by Marcus

  I have ran into a problem that I think someone should have a really clever answer for. Today we have our own mailserver that looks like "mail.domain.com" – which we use to send out mail to our customers (with a modified PHPMailer script). Usually around 5000 mails every day. Everything from customer support to invoices goes through there. The from-header is set to "[email protected]". We are now thinking of migrating to Google Apps for internal use (with 70+ users). However, we cannot use Gmails SMTP for sending "bulk" mails (they have a limit of 500 outgoing mails per day) so we really want to keep using our current system for sending automated mail to our customers – and using gmails SMTP for our internal use. So, how do we set up our SPF-records (Sender Policy Framework) for this? We do not want to get stuck in any filters for "spoofing" the sender from either type of account (the ones sent from our own server, and through Gmails). In short: we want to be able to use the same e-mail adress (for sending) on two different SMTP servers (and therefore two different IP-adresses). Anyone with a good knowledge off SPF who knows how to go about? Or if it is even possible? Anything else I should think of when switching to Google Apps?

  Read the article

• Moving a lot of small files between servers using rsync

  - by Adirael

  Hello guys, I'm moving a lot of files (about 2 millions) between two servers on different locations using rsync over ssh, it seems to work fine but I just realised I'm losing some files on the process. I got server 1, with the original data, and server 2, with the copy. Server 1 runs CentOS 5 and Server 2 runs on Ubuntu 10. I'm doing the transfer on the Server's 2 command line like this: rsync -e ssh -avzn usr@server1:/remote/path /local/path The first file movement I did using tar, but I didn't though of piping it through ssh and it failed cause the disk on server 1 was almost full, so I transfered it anyways (it was about 200GB) and got about 80% of the files. Then I piped another tar with the rest of the files (they're in folders, I got 100 folders with about 30 subfolders each, with files inside) and now I got everything on server 2. I wanted to be sure, so I my two options are getting the md5sum of all the files and check them or running an rsync on server 2 against server 1, that's what I did. It got some missing stuff and now it says there's nothing more to do (DRY RUN). But I got at least two files that are missing inside a subfolder. I ran that same rsync on that folder, but still dry run. Am I doing something wrong? Thanks, and sorry for the wall of text.

  Read the article

• How can I measure actual memory usage from my running processes?

  - by NullUser

  I have two servers, server1 and server2. Both of them are identical HP blades, running the exact same OS (RHEL 5.5). Here's the output of free for both of them: ### server1: total used free shared buffers cached Mem: 8017848 2746596 5271252 0 212772 1768800 -/+ buffers/cache: 765024 7252824 Swap: 14188536 0 14188536 ### server2: total used free shared buffers cached Mem: 8017848 4494836 3523012 0 212724 3136568 -/+ buffers/cache: 1145544 6872304 Swap: 14188536 0 14188536 If I understand correctly, server2 is using significantly more memory for disk I/O caching, which still counts as memory used. But both are running the same OS and if I remember correctly, I configured both with the same parameters when they were installed. I did a diff on /etc/sysctl.conf and they are identical. The problem is, I am collecting memory usage and other metrics over a period of time, (eg: vmstat, iostat, etc.) while a load is generated on the system. The memory used for caching is throwing off my calculations on the results. How can I measure actual memory usage from my running processes, rather than system usage? Is used - (buffers + cached) a valid way to measure this?

  Read the article

• Seeing traffic destined for other people's servers in wireshark

  - by user350325

  I rent a dedicated server from a hosting provider. I ran wireshark on my server so that I could see incoming HTTP traffic that was destined to my server. Once I ran wireshark and filtered for HTTP I noticed a load of traffic, but most of it was not for stuff that was hosted on my server and had a destination IP address that was not mine, there were various source IP addresses. My immediate reaction was to think that somebody was tunnelling their HTTP traffic through my server somehow. However when I looked closer I noticed that all of this traffic was going to hosts on the same subnet and all of these IP addresses belonged to the same hosting provider that I was using. So it appears that wireshark was intercepting traffic destined for other customers who's servers are attached to the same part of the network as mine. Now I always assumed that on a switch based network that this should not happen as the switch will only send data to the required host and not to every box attached. I assume in this case that other customers would also be able to see data going to my server. As well as potential privacy concerns, this would surely make ARP poising easy and allow others to steal IP addresses (and therefor domains and websites)? It would seem odd that a network provider would configure the network in such a way. Is there a more rational explanation here?

  Read the article

• How to securely connect to multiple different LDAPS servers (Debian)

  - by Pickle

  I'm trying to connect to multiple different LDAPS servers. A lot of the documentation I've seen recommends setting TLS_REQCERT never, but that strikes me as horribly unsecure to not verify the certificate. So I've set that to demand. All the documentation I've seen says I need to update ldap.conf with a TLS_CACERT directive pointing to a .pem file. I've got that .pem file set up with the certificate from LDAP Server #1, and ldaps connections are happening fine. I've now got to communicate securely with another LDAP server in another branch of my organization, that uses a different certificate. I've seen no documentation on how to do this, except 1 page that says I can simply put multiple (not chained) certificates in the same .pem file. I've done this and everything is working hunky dorey. However, when I told a colleague what I did, he sounded like the sky was falling - putting 2 non-chained certificates into one .pem file is apparently the worst thing since ... ever. Is there a more acceptable way to do this? Or is this the only accepted way?

  Read the article

• 2 Web Servers, 2 Domains, 1 WAN IP configuration

  - by Tillman32

  The Problem: I have 2 domains, 2 web servers, 1 WAN IP. This is on a home network, so I don't have any crazy router or anything with the right tools, at least I don't think I do. I have a Dlink DIR-655 router. I need to be able to forward the website to the right box. 1 server is hosting www.site1.com, and the other should be hosting, www.site2.com. I forwarded the domain, to a port that is forwarded to that box. wanip:1235, 1235 is then forwarded to the internal IP of site2's server. But when I go to www.site2.com I get the 404 page of www.site1.com. I need www.site2.com to go to the right server. Is this something I can do in the virtual hosts of www.site1.com or is it something else. Also, if this isn't entirely possible, or if its a big process, I can just move www.site1.com to the www.site2.com's server, and use virtual hosts, that is an option that I would be okay with.

  Read the article

• IIS 7: launch unique site instance per host name

  - by OlduwanSteve

  Is it possible to configure IIS 7 so that a single site with multiple bindings (or wildcard bindings) will launch a unique instance for each unique host name? To explain why this is desirable, we have an application that retrieves its configuration from a remote system. The behaviour of the application is governed by this configuration and not by the 'web.config'. The application uses its host name as a key to retrieve the configuration. Currently it is a manual process to create an identical IIS site for each instance of the application, differing only by the bindings. My thought, if it were possible, is that it would be nice to have one IIS site that effectively works as a template for an arbitrary number of dynamic sites. Whenever it is accessed by a unique host name a new instance of the site would be launched, and all further requests to that host name would go to that instance just as though I had created the site by hand. I use IIS regularly, but only for fairly straightforward site hosting. I'd like to know if this could be configured with vanilla IIS 7, but would also welcome answers that require a plugin or 3rd party product. Programming/architectural suggestions about changes to the app wouldn't really be appropriate for serverfault.

  Read the article

• Need solution for Network/Servers.

  - by rehanplus

  Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

  Read the article

• How do I map an elastic IP to a domain, dont want to use Route 53

  - by Kaustubh P

  This is the first time I am doing this, so noob alert. I have an ec2 instance, to which I have assigned an elastic IP. I want to map this elastic IP to a webaddress foo.com, which I have bought from name.com. How do I do this? It would be very helpful if you you increase my vocabulary, and tell me the things involved, I dont know where to begin, SO has always been helpful! This is a screenshot of my name.com CP:

  Read the article

• Not having address/phone number in WHOIS database?

  - by HighCommander4

  When I sign up for an account with a domain name registrar like 10dollar.ca, it asks for my address and phone number. Will these show up when someone does a WHOIS lookup on my domain name? I noticed that when you do a WHOIS lookup on some websites (e.g. http://www.chrismanieri.ca), no address/phone number comes up. I want mine to be like that, too (don't want my address/phone number exposed to the public).

  Read the article

• PlaneProjection is not working well in silverlight

  - by vishal

  in silverlight project using name attribute in planeprojection gives Error 1 The type or namespace name 'PlaneProjection' could not be found (are you missing a using directive or an assembly reference?) code i used for that <Image Name="blabla.jpg" Height="200" Width="200" > <Image.Projection> <PlaneProjection Name="pp" /> </Image.Projection> </Image>

  Read the article

• Authenticating Apache HTTPd against multiple LDAP servers with expired accounts

  - by Brian Bassett

  We're using mod_authnz_ldap and mod_authn_alias in Apache 2.2.9 (as shipped in Debian 5.0, 2.2.9-10+lenny7) to authenticate against multiple Active Directory domains for hosting a Subversion repository. Our current configuration is: # Turn up logging LogLevel debug # Define authentication providers <AuthnProviderAlias ldap alpha> AuthLDAPBindDN "CN=Subversion,OU=Service Accounts,O=Alpha" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://dc01.alpha:3268/?sAMAccountName?sub? </AuthnProviderAlias> <AuthnProviderAlias ldap beta> AuthLDAPBindDN "CN=LDAPAuth,OU=Service Accounts,O=Beta" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://ldap.beta:3268/?sAMAccountName?sub? </AuthnProviderAlias> # Subversion Repository <Location /svn> DAV svn SVNPath /opt/svn/repo AuthName "Subversion" AuthType Basic AuthBasicProvider alpha beta AuthzLDAPAuthoritative off AuthzSVNAccessFile /opt/svn/authz require valid-user </Location> We're encountering issues with users that have accounts in both Alpha and Beta, especially when their accounts in Alpha are expired (but still present; company policy is that the accounts live on for at a minimum of 1 year). For example, when the user x (which has en expired account in Alpha, and a valid account in Beta), the Apache error log reports the following: [Tue May 11 13:42:07 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14817] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:08 2010] [warn] [client 10.1.1.104] [14817] auth_ldap authenticate: user x authentication failed; URI /svn/ [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue May 11 13:42:08 2010] [error] [client 10.1.1.104] user x: authentication failure for "/svn/": Password Mismatch [Tue May 11 13:42:08 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ Attempting to authenticate as a non-existant user (nobodycool) results in the correct behavior of querying both LDAP servers: [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:40 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://ldap.beta:3268/?sAMAccountName?sub? [Tue May 11 13:42:44 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:44 2010] [error] [client 10.1.1.104] user nobodycool not found: /svn/ [Tue May 11 13:42:44 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ How do I configure Apache to correctly query Beta if it encounters an expired account in Alpha?

  Read the article

• Unable to ping local machines by name in Windows 7

  - by aardvarkk

  I'm having a strange (and persistent!) problem with pinging local machines on my network by name. I believe my machine (Windows 7 64-bit) is the only one having this issue. This is over a wireless connection. As an example, consider a device on my network by the name of WDTVLiveHub. It's a Western Digital Live Hub (surprise!). If I go to my router's DHCP Client Table in the browser (my router is a WRT400N), I see this entry: WDTVLiveHub 192.168.1.101 Great. So I try to ping that IP address: ping 192.168.1.101 Pinging 192.168.1.101 with 32 bytes of data: Reply from 192.168.1.101: bytes=32 time=9ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Ping statistics for 192.168.1.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 16ms, Average = 14ms OK, still looking good. Now I try to ping it by name: ping WDTVLiveHub Ping request could not find host WDTVLiveHub. Please check the name and try again. From what I've read, this implies a problem with DNS servers and host name lookups. Interestingly, if I type the following: pathping 192.168.1.101 I get this output: Tracing route to WDTVLIVEHUB [192.168.1.101] over a maximum of 30 hops: 0 Scotty [192.168.1.103] 1 WDTVLIVEHUB [192.168.1.101] Computing statistics for 25 seconds... Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 Scotty [192.168.1.103] 1/ 100 = 1% | 1 12ms 1/ 100 = 1% 0/ 100 = 0% WDTVLIVEHUB [192.168.1.101] Trace complete. Scotty is obviously the name of my local machine. So it's able to find the name somehow when I do that approach... ipconfig /all shows the following under DNS servers: DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** Where the * represents the same DNS servers that show up in my router under DNS 1 and DNS 2 through the Internet. For completeness, here's the whole output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : Scotty Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Peer-Peer IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 0C-EE-E6-D1-07-E8 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2002:d83a:31e5:1234:5592:398e:8968:43d1(Preferred) Temporary IPv6 Address. . . . . . : 2002:d83a:31e5:1234:ecce:2f79:72a5:5273(Preferred) Link-local IPv6 Address . . . . . : fe80::5592:398e:8968:43d1%26(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : September-17-12 11:05:57 PM Lease Expires . . . . . . . . . . : September-18-12 11:05:57 PM Default Gateway . . . . . . . . . : fe80::200:ff:fe00:0%26 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 537718502 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VirtualBox Host-Only Network: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter Physical Address. . . . . . . . . : 08-00-27-00-98-9A DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::b48a:916b:c0f:fb29%23(Preferred) Autoconfiguration IPv4 Address. . : 169.254.251.41(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 570949671 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{55899375-C31D-4173-A529-4427D63FD28B}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{64B8F35F-A6AB-4D6B-B1D5-DD95F57B1458}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Not sure exactly how to diagnose exactly what's going on... but the problem is really frustrating! The biggest problem is that my mapped network drives have to be done by IP, and then any time the router assigns new IP addresses to those devices, all of my network shares break again. Stinks! Would love some assistance on possible solutions. I've tried all of this netsh catalog resetting and that didn't seem to fix anything at all. Would love an explanation of what's going wrong, too, rather than blindly resetting things! Thanks!

  Read the article

• Prefix files with the current directory name using Powershell

  - by XST

  I have folders with images (*.png and *.jpg) >C:\Directory\Folder1 01.png 02.png 03.jpg 04.jpg 05.png And I want to rename all the files like this using powershell: >C:\Directory\Folder1 Folder1 - 01.png Folder1 - 02.png Folder1 - 03.jpg Folder1 - 04.jpg Folder1 - 05.png So I came up with this simple line: Get-ChildItem | Where-Object { $_.Extension -eq ".jpg" -or $_.Extension -eq ".png"} | rename-item -newname {$_.Directory.Name +" - " + $_.Name} If I have 35 or less files in the folder, I will have the wanted result, but if there is 36 or more files, I will end up with this: >C:\Directory\Folder1 Folder1Folder1Folder1 - 01.png Folder1Folder1Folder1 - 02.png Folder1Folder1Folder1 - 03.jpg Folder1Folder1Folder1 - 04.jpg Folder1Folder1Folder1 - 05.png The loop stops when the file's name exceeds 248 characters. Any ideas why it's looping?

  Read the article

• Configure IIS to rewrite IP Address to Site Name

  - by Bath Man

  So i've started my first web site from home, and I'm trying to get it up and running and google crawlable and the like, but I can't seem to figure out how to have my site name returned in the address bar instead of my IP address. I've purchased a domain name for my site on Godaddy and then set it to redirect to my site. When you type in the domain name, you get redirected to http://0.0.0.0/default.aspx (not my real IP obviously), and that stays in the user's address bar. In order to fix that temporarily, I've set up masking on Go Daddy which keeps the URL in the address bar, but just shows my website in a frame. This is fine for users visiting the site, however any kind of automated robot such as GoogleBot cannot discover my content because of the frame. I've looked into ISAPI filters and server-site-rewriting, and the like... but I just can't quite figure out how to do what I need it to do. Any simple suggestions or links would be appreciated.

  Read the article

• Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

  - by Thomas

  I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

  Read the article

• Blade Enclosure, Multiple Blade Servers, Whats the closest approximation to a DMZ?

  - by codeulike

  I appreciate that to get a proper DMZ, one should have a physical separation between the DMZ servers and the LAN servers, with a firewall server in between. But, in a network consisting of a single Blade Enclosure containing two or more Blade servers, whats the closest approximation to a DMZ that could be designed? More details: Virtual servers, mostly Windows, running in a VMWare environment on the Blade servers, and physical firewall box between the Blade enclosure and the internet.

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

• Update the remote of a git branch after name changing

  - by Dror

  Consider the following situation. A remote repository has two branches master and b1. In addition it has two clones repo1 and repo2 and both have b1 checked out. At some point, in repo1 the name of b1 was changed. As far as I can tell, the following is the right procedure to change the name of b1: $ git branch b1 b2 # changes the name of b1 to b2 $ git push remote :b1 # delete b1 remotely $ git push --set-upstream origin b2 # create b2 remotely and direct the local branch to track the remote 1 Now, afterwards, in repo2 I face a problem. git pull doesn't pull the changes from the branch (which is now called remotely b2). The error returned is: Your configuration specifies to merge with the ref 'b1' from the remote, but no such ref was fetched. What is the right way to do this? Both the renaming part and the updating in other clones?

  Read the article

• Looking for Primos "name generation" code

  - by Greg E

  Anyone remember Primos ? It had a shell-level thing called "name generation" which was very useful. Eg. to rename a bunch of files from part1.suffix to part1.new.suffix2 you could say rename *.suffix =.+new.suffix2 That's a very simple example, it was quite powerful. The control characters were: =,==,^=,^==,+ Which meant approximately: match 1 filename component, match all remaining components, delete one component, delete all remaining, add a component. In conjunction with Primos wildcards you could do pretty much any useful file renaming/copying operation very conveniently. It was much better than Unix wildcards and name generation/iteration and I'd like to find it again and use it. Anyone seen it around ? Not much reference on the interweb: search "Primos name generation" and you get a few fragmentary hits. Thanks !

  Read the article

• Duplicate name exists solution

  - by user978733

  I have about 70 pc's with exactly same hardware. I decided to automate turning on and off. I took 1 PC. Here is what I've done: Changed bios configuration so that now pc's waking when I turn on AC switch Installed Windows XP and configured so that I can turn off remotelly, changed workgroup name to "WG1", and pc name to "ExamPC" Then created acronis backup image of this pc I installed this image in several PC's and tried to test All worked well till windows opened. The problem is, all tested PC's started Windows nearly at the same time, and all of them popped up error Duplicate name exist. I can't figure out any solution. Any suggestions?

  Read the article

• word 2010 Macro to name and Save file when opened

  - by Phillip Clark

  I have a word document template and will be using a hyper link in Excel to access the word file. The issue I need to resolve is making sure once it is opened a message field box is "popped" up asking the user to create a new file name ... (in this case the current date) for each time the file is opened. In the message pop when finished entering in file name they click yes and then the save screen comes up with the path/file type (macro enabled document) and the file name they have already entered in the pop up.. All they should have to do from the save screen is click ok and it saves the file to a certain path/folder on the C drive of the computer. Once they finish typing in their notes they click a active x button to save and close and they are finished. If anyone can help with this it would be fantastic.

  Read the article

• find files their name is smaller or greater than a given parameter

  - by Tzury Bar Yochay

  Say that in a given directory I got tzury@x200:~/Desktop/sandbox$ ls -l total 20 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N00.P000 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N00.P001 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N00.P002 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N00.P003 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N00.P004 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N01.P000 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N01.P001 drwxr-xr-x 2 tzury tzury 4096 2011-03-09 10:19 N01.P002 I seek for a bash way to grab the list of files which their name is either grater or smaller than a given parameter, for instance: $ my_finder lt N00.P003 shall return N00.P000, N00.P001 and N00.P002 $ my_finder gt N00.P003 shall return N00.P004, N01.P000, N01.P001 and N01.P002 I was thinking of iterating over for name in $(ls) and while $name != $2 but believe there are more elegant way of doing so

  Read the article

• Squid 2.7 in offline_mode yet tries to contact DNS servers to resolve addresses

  - by William C

  I installed Squid 2.7 to act as a web cache on my laptop, so that I can browse previously-visited sites when I don't have WiFi. Except http_access allow all, I've made no changes to the default squid.conf configuration. When I turn offline_mode ON and disconnect from the Internet, and then I visit sites, I encounter The following error was encountered: Unable to determine IP address from host name for whatever.sitename.com The dnsserver returned: Timeout on any site I visit. What settings do I need to add to squid.conf so I can browse sites offline?

  Read the article

• How can I display host name on windows desktop

  - by Martin

  I do a lot of work on Windows Server 2008 remote desktops and often lose track of which host I am currently logged on to. Is there a way of displaying (without installing any non-standard apps) the host name or IP address of the host I am connected to in either the wallpaper or the notification area? I tried creating files in the desktop with the name of the machine - but my roaming profile shows the same set of desktop files on every machine, so that was scuppered. Duh! In shell windows this is easy: just set the prompt to display the host name. Surely there is a simple way of doing the same for the graphical desktop.

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >