Search Results

Search found 20044 results on 802 pages for 'software monkey'.

Page 44/802 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Software RAID 1 broken, how do I fix this?

  - by Edward

  I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

  Read the article

• Software Architecture: Quality Attributes

  Quality is what all software engineers should strive for when building a new system or adding new functionality. Dictonary.com ambiguously defines quality as a grade of excellence. Unfortunately, quality must be defined within the context of a situation in that each engineer must extract quality attributes from a project’s requirements. Because quality is defined by project requirements the meaning of quality is constantly changing base on the project. Software architecture factors that indicate the relevance and effectiveness The relevance and effectiveness of architecture can vary based on the context in which it was conceived and the quality attributes that are required to meet. Typically when evaluating architecture for a specific system regarding relevance and effectiveness the following questions should be asked.   Architectural relevance and effectiveness questions: Does the architectural concept meet the needs of the system for which it was designed? Out of the competing architectures for a system, which one is the most suitable? If we look at the first question regarding meeting the needs of a system for which it was designed. A system that answers yes to this question must meet all of its quality goals. This means that it consistently meets or exceeds performance goals for the system. In addition, the system meets all the other required system attributers based on the systems requirements. The suitability of a system is based on several factors. In order for a project to be suitable the necessary resources must be available to complete the task. Standard Project Resources: Money Trained Staff Time Life cycle factors that affect the system and design The development life cycle used on a project can drastically affect how a system’s architecture is created as well as influence its design. In the case of using the software development life cycle (SDLC) each phase must be completed before the next can begin.  This waterfall approach does not allow for changes in a system’s architecture after that phase is completed. This can lead to major system issues when the architecture for the system is not as optimal because of missed quality attributes. This can occur when a project has poor requirements and makes misguided architectural decisions to name a few examples. Once the architectural phase is complete the concepts established in this phase must move on to the design phase that is bound to use the concepts and guidelines defined in the previous phase regardless of any missing quality attributes needed for the project. If any issues arise during this phase regarding the selected architectural concepts they cannot be corrected during the current project. This directly has an effect on the design of a system because the proper qualities required for the project where not used when the architectural concepts were approved. When this is identified nothing can be done to fix the architectural issues and system design must use the existing architectural concepts regardless of its missing quality properties because the architectural concepts for the project cannot be altered. The decisions made in the design phase then preceded to fall down to the implementation phase where the actual system is coded based on the approved architectural concepts established in the architecture phase regardless of its architectural quality. Conversely projects using more of an iterative or agile methodology to implement a system has more flexibility to correct architectural decisions based on missing quality attributes. This is due to each phase of the SDLC is executed more than once so any issues identified in architecture of a system can be corrected in the next architectural phase. Subsequently the corresponding changes will then be adjusted in the following design phase so that when the project is completed the optimal architectural and design decision are applied to the solution. Architecture factors that indicate functional suitability Systems that have function shortcomings do not have the proper functionality based on the project’s driving quality attributes. What this means in English is that the system does not live up to what is required of it by the stakeholders as identified by the missing quality attributes and requirements. One way to prevent functional shortcomings is to test the project’s architecture, design, and implementation against the project’s driving quality attributes to ensure that none of the attributes were missed in any of the phases. Another way to ensure a system has functional suitability is to certify that all its requirements are fully articulated so that there is no chance for misconceptions or misinterpretations by all stakeholders. This will help prevent any issues regarding interpreting the system requirements during the initial architectural concept phase, design phase and implementation phase. Consider the applicability of other architectural models When considering an architectural model for a project is also important to consider other alternative architectural models to ensure that the model that is selected will meet the systems required functionality and high quality attributes. Recently I can remember talking about a project that I was working on and a coworker suggested a different architectural approach that I had never considered. This new model will allow for the same functionally that is offered by the existing model but will allow for a higher quality project because it fulfills more quality attributes. It is always important to seek alternatives prior to committing to an architectural model. Factors used to identify high-risk components A high risk component can be defined as a component that fulfills 2 or more quality attributes for a system. An example of this can be seen in a web application that utilizes a remote database. One high-risk component in this system is the TCIP component because it allows for HTTP connections to handle by a web server and as well as allows for the server to also connect to a remote database server so that it can import data into the system. This component allows for the assurance of data quality attribute and the accessibility quality attribute because the system is available on the network. If for some reason the TCIP component was to fail the web application would fail on two quality attributes accessibility and data assurance in that the web site is not accessible and data cannot be update as needed. Summary As stated previously, quality is what all software engineers should strive for when building a new system or adding new functionality. The quality of a system can be directly determined by how closely it is implemented when compared to its desired quality attributes. One way to insure a higher quality system is to enforce that all project requirements are fully articulated so that no assumptions or misunderstandings can be made by any of the stakeholders. By doing this a system has a better chance of becoming a high quality system based on its quality attributes

  Read the article

• Abstraction, Politics, and Software Architecture

  Abstraction can be defined as a general concept and/or idea that lack any concrete details. Throughout history this type of thinking has led to an array of new ideas and innovations as well as increased confusion and conspiracy. If one was to look back at our history they will see that abstraction has been used in various forms throughout our past. When I was growing up I do not know how many times I heard politicians say “Leave no child left behind” or “No child left behind” as a major part of their campaign rhetoric in regards to a stance on education. As you can see their slogan is a perfect example of abstraction because it only offers a very general concept about improving our education system but they do not mention how they would like to do it. If they did then they would be adding concrete details to their abstraction thus turning it in to an actual working plan as to how we as a society can help children succeed in school and in life, but then they would not be using abstraction. By now I sure you are thinking what does abstraction have to do with software architecture. You are valid in thinking this way, but abstraction is a wonderful tool used in information technology especially in the world of software architecture. Abstraction is one method of extracting the concepts of an idea so that it can be understood and discussed by others of varying technical abilities and backgrounds. One ways in which I tend to extract my architectural design thoughts is through the use of basic diagrams to convey an idea for a system or a new feature for an existing application. This allows me to generically model an architectural design through the use of views and Unified Markup Language (UML). UML is a standard method for creating a 4+1 Architectural View Models. The 4+1 Architectural View Model consists of 4 views typically created with UML as well as a general description of the concept that is being expressed by a model. The 4+1 Architectural View Model: Logical View: Models a system’s end-user functionality. Development View: Models a system as a collection of components and connectors to illustrate how it is intended to be developed.  Process View: Models the interaction between system components and connectors as to indicate the activities of a system. Physical View: Models the placement of the collection of components and connectors of a system within a physical environment. Recently I had to use the concept of abstraction to express an idea for implementing a new security framework on an existing website. My concept would add session based management in order to properly secure and allow page access based on valid user credentials and last user activity.  I created a basic Process View by using UML diagrams to communicate the basic process flow of my changes in the application so that all of the projects stakeholders would be able to understand my idea. Additionally I created a Logical View on a whiteboard while conveying the process workflow with a few stakeholders to show how end-user will be affected by the new framework and gaining additional input about the design. After my Logical and Process Views were accepted I then started on creating a more detailed Development View in order to map how the system will be built based on the concept of components and connections based on the previously defined interactions. I really did not need to create a Physical view for this idea because we were updating an existing system that was already deployed based on an existing Physical View. What do you think about the use of abstraction in the development of software architecture? Please let me know.

  Read the article

• Valuing "Working Software over Comprehensive Documentation"

  - by tom.spitz

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} I subscribe to the tenets put forth in the Manifesto for Agile Software Development - http://agilemanifesto.org. As Oracle's chief methodologist, that might seem a self-deprecating attitude. After all, the agile manifesto tells us that we should value "individuals and interactions" over "processes and tools." My job includes process development. I also subscribe to ideas put forth in a number of subsequent works including Balancing Agility and Discipline: A Guide for the Perplexed (Boehm/Turner, Addison-Wesley) and Agile Project Management: Creating Innovative Products (Highsmith, Addison-Wesley). Both of these books talk about finding the right balance between "agility and discipline" or between a "predictive and adaptive" project approach. So there still seems to be a place for us in creating the Oracle Unified Method (OUM) to become the "single method framework that supports the successful implementation of every Oracle product." After all, the real idea is to apply just enough ceremony and produce just enough documentation to suit the needs of the particular project that supports an enterprise in moving toward its desired future state. The thing I've been struggling with - and the thing I'd like to hear from you about right now - is the prevalence of an ongoing obsession with "documents." OUM provides a comprehensive set of guidance for an iterative and incremental approach to engineering and implementing software systems. Our intent is first to support the information technology system implementation and, as necessary, support the creation of documentation. OUM, therefore, includes a supporting set of document templates. Our guidance is to employ those templates, sparingly, as needed; not create piles of documentation that you're not gonna (sic) need. In other words, don't serve the method, make the method serve you. Yet, there seems to be a "gimme" mentality in some circles that if you give me a sample document - or better yet - a repository of samples - then I will be able to do anything cheaply and quickly. The notion is certainly appealing AND reuse can save time. Plus, documents are a lowest common denominator way of packaging reusable stuff. However, without sustained investment and management I've seen "reuse repositories" turn quickly into garbage heaps. So, I remain a skeptic. I agree that providing document examples that promote consistency is helpful. However, there may be too much emphasis on the documents themselves and not enough on creating a system that meets the evolving needs of the business. How can we shift the emphasis toward working software and away from our dependency on documents - especially on large, complex implementation projects - while still supporting the need for documentation? I'd like to hear your thoughts.

  Read the article

• Are there any good references coparing Software Development CM best practices to IT CM best practice

  - by dkackman

  I have spent my career on the software development side of things and in the latter part have become more and more involved in the realm of Software Configuration Management. Now I am moving into an IT group and need to ramp up on CM practices from that standpoint. Are there any good references (books, websites, blogs whatever) out there comparing Software CM practices to IT CM practices? Basically I'm in learning mode and am trying compare things I already know from the software development side to things on the IT side.

  Read the article

• Looking for a Software to harden Windows machines

  - by MosheH

  I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So IF anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

  Read the article

• MAPS software on colocated server

  - by Tomislav

  As a participant in MAPS program, are we allowed to place the software installation on a colocated server , or does it have to be installed in the office itself ? Also, is this scenario viable: Usimg MAPS windows as a OS, are we allowed to allow our own software to be publicly reachable ? ( we have a MAPS Windows driven server , and we would like to present software we made, and is installed on it to our customers as trial, to reach the software, Client would have to connect to windows by RDP)

  Read the article

• Automatic backup software?

  - by Mehrdad

  Every backup software I've seen (even the ones that claim "continuous" protection) only backs up files periodically -- say, every 5 minutes. What I'm looking for is true continuous backup software, i.e. software that can transparently back up files immediately before they are written to, so that I can be certain I have all the versions of a file that ever existed. Is there any software that does this?

  Read the article

• What is a good open source software to manage my Tripp-lite UPS (Uninterruptible power supply)

  - by Beatle

  I have a Tripp-Lite Smart150rmxl2ua UPS. The software from their website doesn't seem to work properly. I also tried "apcupsd" which is an open source software which i am supposed to be able to use to manage my UPS and I had no luck with that either since Windows 7 did not want to install and use the drivers since they are "incompatible". Is there another good working open source software out there? It sucks that Tripp-Lite doesn't supply its customers with working software.

  Read the article

• Using CheckPoint SNX with RSA SecurID Software Token to connect to VPN

  - by Vinnie

  I have a fairly specific issue that I'm hoping someone else out in the community has had to tackle with success. My company uses CheckPoint VPN clients on Windows XP machines with RSA SecurID software to generate the tokens. The beauty is that once you generate a token code on the software, you can enter it into any machine trying to connect via VPN and with your username get connected. So, I've got Ubuntu 10.10 32bit on a tower and formerly on a laptop. Through several posts around the web, I was able to get SNX installed on the laptop, plug in my server connection information and be asked for a password only to have the connection fail. I used to debug mode and was able to see that the application was trying to and failing at writing a registry value, but I believe that to be a symptom of a different issue, even though I tried to find a way to remedy that. I'm wondering if anyone out there is on a similar configuration and was able to connect with SNX using an RSA token? If so, what steps did you take to setup and what problems/solutions did you encounter?

  Read the article

• Fun with RadCaptcha for ASP.NET AJAX and OCR software

  A friend of mine was evaluating OCR software and finally decided to go with FineReader. I was curious what would happen if we put the RadCaptcha control in. Will the advanced OCR manage to decode it or not? At first he showed me a test run with the RadCaptcha demo description, to get an idea of the basic output:    Naturally, the captured description text was no problem - only a few characters were misread but then corrected with the spellcheck. Next, the real test was performed:    These were only a couple of the results, but there is no need to post the rest of the tests - none of the RadCaptcha images were recognized by the OCR software. Here are the CaptchaImage settings used in the tests: Background Noise Level: Low /default value Line Noise Level: Low /default value Font Warp Factor: Low /Medium is default value...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Who practices, or is likely to practice, the IEEE Software Engineering? [closed]

  - by user72757

  There is an interesting issue in Software Engineering which I'd like to explore. The issue is firstly what is and what is not software engineering. Secondly, if software engineering is what the IEEE defines it to be, what are good examples of companies which practice the SE? Detailed question: Software engineering (SE) is the application of a systematic, disciplined, quantifiable approach to the design, development, operation, and maintenance of software, and the study of these approaches; that is, the application of engineering to software. [updated definition, originating in 610.12-1990 - IEEE Standard Glossary of Software Engineering Terminology] If we consider as SE only those approaches that 100% match the above definition, we naturally get to SWEBOK (Software Engineering Body of Knowledge) which is created by the IEEE and the ACM. I'm seeking the answer to this: How can I find a company outside the defence industry which practices the SE as defined by IEEE? Clues: SE originates in 1968 NATO conference. The Software Engineering Institute (SEI) is based in the US at Carnegie Mellon University. Funding of the SEI is largely done by the US DoD. Defence industry uses the SE and sometimes has a partnership with the IEEE (as in case of Boeing). Possible decomposition of my big question into smaller chunks: a) Where is anyone who acknowledges the IEEE Software Engineering standards at work and perhaps even uses some of them? http://cs.hbg.psu.edu/cmpsc487/IEEEStds_List.htm b) Where can I find a person or a company building around SWEBOK? http://www.computer.org/portal/web/swebok/html/contents c) What is an example of a company professionally using CSDP (apart from those at IEEE website)? Does anyone have any possible contribution to this question?

  Read the article

• License Requirements for Including Dual-Licensed Open-Source Software

  - by Rick Roth

  How do you opt into one software license and not the other when the distributor gives the consumer more than one choice? For example I would like to use the DataTables JavaScript library in my web application. According to their web site, "DataTables is dual licensed under the GPL v2 license or a BSD (3-point) license." Furthermore, the source code of the JavaScript library has this text that calls out both licenses: /** * @summary DataTables * @description Paginate, search and sort HTML tables * @version 1.9.4 * @file jquery.dataTables.js * @author Allan Jardine (www.sprymedia.co.uk) * @contact www.sprymedia.co.uk/contact * * @copyright Copyright 2008-2012 Allan Jardine, all rights reserved. * * This source file is free software, under either the GPL v2 license or a * BSD style license, available at: * http://datatables.net/license_gpl2 * http://datatables.net/license_bsd * * This source file is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the license files for details. * * For details please refer to: http://www.datatables.net */ Finally, the web pages with the licensing text (e.g. the DataTables BSD license page) has this statement: "DataTables is made available under both the GPL v2 license and a BSD (3-point) style license. You can select which one you wish to use the DataTables code under." My specific question is "how do you select which one you want to use." In my case, I want to only use the BSD license and I want to make it explicitly clear that I do not opt into the GPL v2 license in any way. How do you do that and have it hold up to legal challenge?

  Read the article

• Bruce Lee Software development.

  - by DesigningCode

  "Styles tend to not only separate men - because they have their own doctrines and then the doctrine became the gospel truth that you cannot change. But if you do not have a style, if you just say: Well, here I am as a human being, how can I express myself totally and completely? Now, that way you won't create a style, because style is a crystallization. That way, it's a process of continuing growth."- Bruce Lee This is kind of how I see software development. What I enjoyed in the the early days of Agile, things seemed very dynamic, people were working out all manner of ways of doing things. It was technique oriented, it was very fluid and people were finding all kinds of good ways of doing things.  Now when I look at the world of “Agile” it seems more crystalized.  In fact that seemed to be a goal, to crystalize the goodness so everyone can share.   I think mainly because it seems a heck of a lot easier to market.  People are more willing to accept a well defined doctrine and drink the Kool Aid.   Its more “corporate” or “professional”. But the process of crystalizing the goodness actually makes it bad.   But luckily in the world of software development there are still many people who are more focused on “how can I express myself totally and completely”.   We are seeing expressive languages, expressive frameworks, tooling that helps you to better express yourself, design techniques that allow you to better express your intent.    I love that stuff! So beware, be very cautious of anyone offering you new age wisdom based on crystals!

  Read the article

• Restoring GRUB2 on Software RAID 0 after Windows 7 wiped it using Ubuntu 10.10 LiveCD

  - by unknownthreat

  I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

  Read the article

• Need for gksudo for "Install new software" in eclipse

  - by Captain Giraffe

  I have been developing for android on eclipse for a while now, and my experience with the eclipse environment on Ubuntu10.10 has not been a smooth one. With the repo install of eclipse I have had to sudo eclipse to install the required components for android development. (a big red flag for me) I tried today to install updates for the eclipse and android platform and my eclipse installation seems to have broken horribly. I can no longer find and of the urls for new software if i gksudo it, if I run it in user mode it fails (as it always has) with permissions problems. I have chowned user:user all my eclipse and android related private/user files. This is a system running ubuntu 10.10 with gnome2.x. On my kubuntu 11.10 install it work a lot better. Is there an easy fix to this? Is the repo version of eclipse broken? Should I do a clean install for just my user? (if so can I retain my previously installed software? the installation process is very time consuming) I saw there was a previous post here recommending this for new installations.

  Read the article

• Why do we have non-free software in the official repositories?

  - by fluteflute

  The Ubuntu wiki describes the "sections" of the official Ubuntu repositories as follows: Main - Officially supported software. Restricted - Supported software that is not available under a completely free license. Universe - Community maintained software, i.e. not officially supported software. Multiverse - Software that is not free. I thought that software in the Ubuntu repositories had to be open source, however doesn't the description of the Multiverse directly contradicts this?

  Read the article

• software architecture (OO design) refresher course

  - by PeterT

  I am lead developer and team lead in a small RAD team. Deadlines are tight and we have to release often, which we do, and this is what keep the business happy. While we (the development team) are trying to maintain the quality of the code (clean and short methods), I can't help but notice that the overall quality of the OO design&architecture is getting worse over the time - the library we are working on is gradually reducing itself to a "bag of functions". Well, we try to use the design patterns, but since we don't really have much time for a design as such we are mostly using the creational ones. I have read Code Complete / Design Patterns (GOF & enterprise) / Progmatic Programmer / and many books from Effective XXX series. Should I re-read them again as I have read them a long time ago and forgotten quite a lot, or there are other / better OO design / software architeture books been published since then which I should definitely read? Any ideas, recommendations on how can I get the situation under control and start improving the architecture. The way I see it - I will start improving the architectural / design quality of software components I am working on and then will start helping other team members once I find what is working for me.

  Read the article

• Cloning existing software for commercial purposes - legal implications

  - by user2036256

  I have been asked to clone some existing software for a company. Basically its an old 16 bit DOS console app, which was supplied free of charge in I believe the late 80's. Having replaced the machine that needs to run it with a box running Win7 x64 they can't get it to work. It crashes every couple of minutes under DOSbox. The company that supplied it appears to no longer exist - if they did the company asking me to do this would almost certainly know about it. Its undetermined whether they have gone entirely or are just trading under a different name. If the latter they seem to have withdrawn from the market related to this product (because again, niche area, we should know about everyone there). What is the status to this with regards to copyright etc.? The main concern for the company involved is they want an identical interface to what they already have so I would have to clone this entirely. Having no source code / indication of the underlying mechanisms these would be written from scratch. Is an interface covered by copyright? / Does that still hold 30 years later? What is the assumed license when none at all is provided? Under UK law would I be under any serious risk were I to take on the project? How would this pan out if I then decided to sell the software on to other companies? Thanks

  Read the article

• Software management for 2 programmers

  - by kajo

  me and my very good friend do a small bussiness. We have company and we develop web apps using Scala. We have started 3 months ago and we have a lot of work now. We cannot afford to employ another programmer because we can't pay him now. Until now we try to manage entire developing process very simply. We use excel sheets for simple bug tracking and we work on client requests on the fly. We have no plan for next week or something similar. But now I find it very inefficient and useless. I am trying to find some rules or some methodology for small team or for only two guys. For example Scrum is, imo, unadapted for us. There are a lot of roles (ScrumMaster, Product Owner, Team...) and it seems overkill. Can you something advise me? Have you any experiences with software management in small teams? Is any methodology of current agile development fitten for pair of programmers? Is there any software management for simple bug tracking, maybe wiki or time management for two coders? thanks a lot for sharing.

  Read the article

• Restoring GRUB2 on Software RAID 0 after Windows 7 wiped it using LiveCD

  - by unknownthreat

  I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

  Read the article

• Software design of a browser-based strategic MMO game

  - by Mehran

  I wonder if there are any known tested software designs for Travian-like browser-based strategic MMO games? I mean how would they implement the server of such games or what is stored in database and what is stored in RAM? Is the state of the world stored in one piece or is it distributed among a number of storage? Does anyone know a resource to study the problems and solutions of creating such games? [UPDATE] Suggested in comments, I'm going to give an example how would I design such a project. Even though I'm not sure if I'm proposing the right one. Having stored the world state in a MongoDB, I would implement an event collection in which all the changes to the world will register. Changes that are meant to happen in the future will come with an action date set to the future and those that are to be carried out immediately will be set to now. Having this datastore as the central point of the system, players will issue their actions as events inserted in datastore. At the other end of the system, I'll have a constant-running software taking out events out of the datastore which are due to be carried out and not done yet. Executing an event means apply some update on the world's state and thus the datastore. As scalable as this design sounds, I'm not sure if it will be worth implementing. For one, it is pointless to cache the datastore as most of updates happen once without any follow ups. For instance if you have the growth of resources in your game, you'll be updating the whole world state periodically in which case, having incorporated a cache, you are keeping the whole world in RAM (which most likely is impossible). So can someone come up with a better design?

  Read the article

• Restoring GRUB2 on Software RAID 0 using LiveCD after Windows 7 wiped it

  - by unknownthreat

  I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

  Read the article

• Another good free utility - Campwood Software Source Monitor

  - by TATWORTH

  The Campwoood Source Monitor at http://www.campwoodsw.com/sourcemonitor.html  says in its introduction "The freeware program SourceMonitor lets you see inside your software source code to find out how much code you have and to identify the relative complexity of your modules. For example, you can use SourceMonitor to identify the code that is most likely to contain defects and thus warrants formal review. SourceMonitor, written in C++, runs through your code at high speed, typically at least 10,000 lines of code per second." It is indeed very high-speed and is useful as it: Collects metrics in a fast, single pass through source files. Measures metrics for source code written in C++, C, C#, VB.NET, Java, Delphi, Visual Basic (VB6) or HTML. Includes method and function level metrics for C++, C, C#, VB.NET, Java, and Delphi. Offers Modified Complexity metric option. Saves metrics in checkpoints for comparison during software development projects. Displays and prints metrics in tables and charts, including Kiviat diagrams. Operates within a standard Windows GUI or inside your scripts using XML command files. Exports metrics to XML or CSV (comma-separated-value) files for further processing with other tools.

  Read the article

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >