Search Results

Search found 1298 results on 52 pages for 'ssd'.

Page 44/52 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• What is the cost of memory access?

  - by Jurily

  We like to think that a memory access is fast and constant, but on modern architectures/OSes, that's not necessarily true. Consider the following C code: int i = 34; int *p = &i; // do something that may or may not involve i and p {...} // 3 days later: *p = 643; What is the estimated cost of this last assignment in CPU instructions, if i is in L1 cache, i is in L2 cache, i is in L3 cache, i is in RAM proper, i is paged out to an SSD disk, i is paged out to a traditional disk? Where else can i be? Of course the numbers are not absolute, but I'm only interested in orders of magnitude. I tried searching the webs, but Google did not bless me this time.

  Read the article

• Why does C++ linking use virtually no CPU? (updated)

  - by John

  On a native C++ project, linking right now can take a minute or two, yet during this time CPU drops from 100% during compilation to virtually zero. Does this mean linking is primarily a disk activity? If so, is this the main area an SSD would make big changes? But, why aren't all my OBJ files (or as many as possible) kept in RAM after compilation to avoid this? With 4Gb of RAM I should be able to save a lot of disk access and make it CPU-bound again, no? update: so the obvious follow-up is, can VC++ compiler and linker talk together better to streamline things and keep OBJ files in memory, similar to how Delphi does?

  Read the article

• How to (un)dock IBM Thinkpad X41 from X4 Dock(ing station) successfully?

  - by nutty about natty

  I'd like to start using my docking station again; however, it still doesn't work as it should, see the following bug descriptions (with special focus on Thinkpad X41 & the X4 Dock). Given that it still doesn't work (effective April 2012), my hope is fading that it will start working all of a sudden with Precise Pangolin at the end of the month. This issue is VERY important to me and I would be MOST grateful to anyone being able to sieve through the following links (some of which are actually quite recent) and translate their meaning into reliable and concrete simple (?) steps. I've read briefly about hal and udev, and can imagine that they are somewhat related to this, see links below. I don't want to fire at random. I don't want to tinker around with bash scripts if avoidable... Problem description (more or less ;-) Pressing the undock button on a "ThinkPad X4 Dock" with a ThinkPad X40 does not cause any udev events. And the lights on the dock never change to indicate it is safe to undock. and IBM Thinkpad X41 & docking station no joy :-( ... when pressing the blue undock button on the docking station: - The screen goes blank (with backlight remaining on), - with some SSD/HDD activity; - ctrl alt del causes a shut down after ... seconds, indicating that the system itself hasn't "crashed" but is still (somewhat ?) responsive. and With recent distributions, docking and undocking should function out of the box. You can monitor this by running # udevadm monitor and when you dock or press the undock button you should see a flurry of events. There are some issues though: No event on undock. - In some cases you may not get any events on undock. This is due to the ACPI dock drivers only registering the first logical Dock port they encounter and in some rare cases there may be more then one, such as on a ThinkPad X40 with ThinkPad X4 Dock. Patches are available, and are merged in 2.6.34. Now, if patches are available and merged into 2.6.34 - why isn't (un)docking simply working / fully supported in the latest version of Natty (which to my humble understanding has surpassed kernel version 2.6.34 a while ago)? More relevant links: ThinkPad X41 Docking Station issues and [HOWTO] Run scripts for laptop lid open/close and dock/undock events and finally Symptoms corrected by the latest BIOS Update - ThinkPad X41 - (Fix) USB devices connected to UltraBase X4 or ThinkPad X4 Dock may not be recognized in Boot Menu by pressing F12 during POST. Thanks!!

  Read the article

• .NET development on a “Retina” MacBook Pro

  - by Jeff

  The rumor that Apple would release a super high resolution version of its 15” laptop has been around for quite awhile, and one I watched closely. After more than three years with a 17” MacBook Pro, and all of the screen real estate it offered, I was ready to replace it with something much lighter. It was a fantastic machine, still doing 6 or 7 hours after 460 charge cycles, but I wanted lighter and faster. With the SSD I put in it, I was able to sell it for $750. The appeal of higher resolution goes way back, when I would plug into a projector and scale up. Consolas, as it turns out, is a nice looking font for code when it’s bigger. While I have mostly indifference for iOS, I have to admit that a higher dot pitch on the iPhone and iPad is pretty to look at. So I ordered the new 15” “Retina” model as soon as the Apple Store went live with it, and got it seven days later. I’ve been primarily using Parallels as my VM of choice from OS X for about five years. They recently put out an update for compatibility with the display, though I’m not entirely sure what that means. I figured there would have to be some messing around to get the VM to look right. The combination that seems to work best is this: Set the display in OS X to “more room,” which is roughly the equivalent of the 1920x1200 that my 17” did. It’s not as stunning as the text at the default 1440x900 equivalent (in OS X), but it’s still quite readable. Parallels still doesn’t entirely know what to do with the high resolution, though what it should do is somehow treat it as native. That flaw aside, I set the Windows 7 scaling to 125%, and it generally looks pretty good. It’s not really taking advantage of the display for sharpness, but hopefully that’s something that Parallels will figure out. Screen tweaking aside, I got the base model with 16 gigs of RAM, so I give the VM 8. I can boot a Windows 7 VM in 9 seconds. Nine seconds! The Windows Experience Index scores are all 7 and above, except for graphics, which are both at 6. Again, that’s in a VM. It’s hard to believe there’s something so fast in a little slim package like that. Hopefully this one gets me at least three years, like the last one.

  Read the article

• Dual booting 12.10 and Win 7 - boots directly to Win 7

  - by user110174

  and thank you kindly for you help! I'll preface this with saying that I realize this is a common problem, with lots of trouble-shooting guides available online; however, after multiple attempts with different guides, I've made zero progress and am hoping to someone could help me with my specific scenario. First, my story: -Initially, I installed Ubuntu 12.10 with the "Something Else" option with no problems. Used 4 GB Swap Logical Partition, 26 GB Primary Root Partition. Wanting to trying out Mint 13, I booted into Windows from GRUB2, used the latest version of EasyBCD (v2.2) to restore the Windows 7 bootloader to the MBR, deleted the Ubuntu partitions, reformatted them in NTFS. I then created a 30 GB partition of free space for Mint. I installed Mint using the same partitioning described above for Ubuntu 12.10, using /dev/sda for the boot installation files, and everything seemed to go well, until I re-booted my computer and it went straight to Windows - I could find no way to get into Mint. So I went into windows, restored windows bootloader to the MBR w/ EasyBCD, deleted partitions, etc., as I figured I'd done enough messing around and would go with Ubuntu 12.10. Now the problem: I restarted my computer booting from the same Ubuntu USB key I originally used. Briefly, "error: "prefix" is not set" flashed on screen, and instead of being greeted with the GUI menu of "try vs. install Ubuntu", there was a menu with minimal graphics (like a BIOS menu) where I could select install, run from USB, etc. After selecting "Install Ubuntu", the familiar install wizard with a GUI came up, I partitioned my drive as described, /dev/sda for the boot installation files, install went well, rebooted and...straight to Windows. This is where I'm at. Fixes I've tried: -This guide: How can I repair grub? (How to get Ubuntu back after installing Windows?) to ensure Grub is on the MBR. I followed all steps, but still when I reboot, I go directly into Windows. -Installing 12.04 instead of 12.10 - same issue -Re-installed Ubuntu, writing the boot files to their own partition, then using EasyBCD to to add a boot option for Ubuntu using the Windows bootloader, ensuring I instruct EasyBCD to look at the partition I created with the Ubuntu installer (instructions here http://neosmart.net/wiki/display/EBCD/Ubuntu). When I reboot, I select the Ubuntu option, and it puts me in GRUB4DOS, with a cursor waiting for input. I have no idea what to put here, so I would just type "reboot" to exit out. And this is where I am now. Any clue as to why I can't boot into Ubuntu? My computer specs are: ASUS UX31A Core i7, Win 7 64 Pro, 256 GB SSD, Intel HM76 Chipset and Integrated Intel HD 4000 Graphics, 4 GB memory I've tried to be as clear as possible, but I'd be happy to provide any info that would help anyone along. Thanks for your patience in reading this! Sincerely, -MN

  Read the article

• Live CD / Live USB much faster than full install

  - by user29347

  I've observed it on both laptops I own! HP Compaq nx6125 and Ubuntu 11.04 x64 - somewhat solved Lenovo Thinkpad T500 and Ubuntu 11.10 x64 - help needed! I'm still struggling with the Thinkpad to get performance level similar to that of 10 y.o. laptops... All in all a really serious issue with multiple versions of Ubuntu that renders computers with perfectly compatible hardware unusable, as far as out of the box experience is concerned. Troubleshooting resultant issues seems to be a hard case even for users with some experience with installing graphics drivers. EDIT: I can't really post additional details. Two different ubuntu versions, two laptops, two different set of graph. drivers (OS vs ATI prop.) - all with the same symptoms. Also I can't stress enough how massive the performance degradation is compared to a healthy system. For that reason I ask for input from people who may know roughly what are we dealing with here. I can post more details if we were to focus on my current Thinkpad T500. In that case my current system details: Lenovo Thinkpad T500 Ubuntu 11.10 x64 ATI Mobility Radeon HD 3650 (also see the "What I have already tried" section about Intel graphics tested) ATI Catalyst 11.10 drivers OCZ Agility 3 SSD but! same with the default driver for ATI the card same with the prop. driver for the ATI card from Jockey (Additional drivers applet) What I have already tried: 0. Switching to Intel integrated card (Intel GMA 4500M HD) with the default driver - same effects = may indicate not driver related problem but a problem with something of global influence like e.g. nomodeset or other I don't even know about. (What you can read above) ATI Catalyst 11.10 and radeon.modeset=0 boot parameter + disabled Wait for VBlank. Unity 2D Ubuntu 10.04 LTS tested (ubuntu-10.04.3-desktop-i386.iso): Both live USB and installed version blazing fast! (on the default drivers - without even installing the proprietary fglrx drivers). re2 a) seems to give me the only significant results (still poor) - perfect Unity elements performance with the same crawling stuttering/lagging when dragging windows around. re2 b) this happens often http://i17.photobucket.com/albums/b68/Bucic/ubuntuforumsorg/Screenshotat2011-10-28083140.png re2 c) Sometimes I am able to witness a normal performance when dragging a window around but only for a second or two. When I try to shake it longer it starts to lag and it will keep lagging like that with an increased probability of what you see in the sshot in point re2 b). re2 d) I can't establish the radeon.modeset=0 influence though. Once it seems to work be smooth with it, the other time - without it. Really can't tell.

  Read the article

• Oracle’s Sun Server X4-8 with Built-in Elastic Computing

  - by kgee

  We are excited to announce the release of Oracle's new 8-socket server, Sun Server X4-8. It’s the most flexible 8-socket x86 server Oracle has ever designed, and also the most powerful. Not only does it use the fastest Intel® Xeon® E7 v2 processors, but also its memory, I/O and storage subsystems are all designed for maximum performance and throughput. Like its predecessor, the Sun Server X4-8 uses a “glueless” design that allows for maximum performance for Oracle Database, while also reducing power consumption and improving reliability. The specs are pretty impressive. Sun Server X4-8 supports 120 cores (or 240 threads), 6 TB memory, 9.6 TB HDD capacity or 3.2 TB SSD capacity, contains 16 PCIe Gen 3 I/O expansion slots, and allows for up to 6.4 TB Sun Flash Accelerator F80 PCIe Cards. The Sun Server X4-8 is also the most dense x86 server with its 5U chassis, allowing 60% higher rack-level core and DIMM slot density than the competition.  There has been a lot of innovation in Oracle’s x86 product line, but the latest and most significant is a capability called elastic computing. This new capability is built into each Sun Server X4-8.   Elastic computing starts with the Intel processor. While Intel provides a wide range of processors each with a fixed combination of core count, operational frequency, and power consumption, customers have been forced to make tradeoffs when they select a particular processor. They have had to make educated guesses on which particular processor (core count/frequency/cache size) will be best suited for the workload they intend to execute on the server.Oracle and Intel worked jointly to define a new processor, the Intel Xeon E7-8895 v2 for the Sun Server X4-8, that has unique characteristics and effectively combines the capabilities of three different Xeon processors into a single processor. Oracle system design engineers worked closely with Oracle’s operating system development teams to achieve the ability to vary the core count and operating frequency of the Xeon E7-8895 v2 processor with time without the need for a system level reboot.  Along with the new processor, enhancements have been made to the system BIOS, Oracle Solaris, and Oracle Linux, which allow the processors in the system to dynamically clock up to faster speeds as cores are disabled and to reach higher maximum turbo frequencies for the remaining active cores. One customer, a stock market trading company, will take advantage of the elastic computing capability of Sun Server X4-8 by repurposing servers between daytime stock trading activity and nighttime stock portfolio processing, daily, to achieve maximum performance of each workload.To learn more about Sun Server X4-8, you can find more details including the data sheet and white papers here.Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software. He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Ubuntu server spontaneous reboot

  - by user1941407

  I have got two ubuntu 12.04 servers(xeon e3). Sometimes(several days) each server spontaneously reboots. HDDs and other hardware are ok. Which logfile can help find a reason of the problem? UPDATED. hardware: xeon e3 processor, intel server motherboard, 32gb ddr3 ecc, mdadm mirror hdd raid for system, mdadm ssd raid for database(postgres). Both servers have similar (not identical) components. Smart is OK. It seems that the problem is in the software. Python process and database are running on this servers. Syslog (time of reboot): Aug 23 13:42:23 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:42:23 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:43:24 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:43:24 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:44:14 xeon sensord: Chip: acpitz-virtual-0 Aug 23 13:44:14 xeon sensord: Adapter: Virtual device Aug 23 13:44:14 xeon sensord: temp1: 27.8 C Aug 23 13:44:14 xeon sensord: temp2: 29.8 C Aug 23 13:44:14 xeon sensord: Chip: coretemp-isa-0000 Aug 23 13:44:14 xeon sensord: Adapter: ISA adapter Aug 23 13:44:14 xeon sensord: Physical id 0: 37.0 C Aug 23 13:44:14 xeon sensord: Core 0: 37.0 C Aug 23 13:44:14 xeon sensord: Core 1: 37.0 C Aug 23 13:44:14 xeon sensord: Core 2: 37.0 C Aug 23 13:44:14 xeon sensord: Core 3: 37.0 C Aug 23 13:44:24 xeon hddtemp[1411]: /dev/sdc: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:44:24 xeon hddtemp[1411]: /dev/sdd: WDC WD15NPVT-00Z2TT0: 34 C Aug 23 13:47:01 xeon kernel: imklog 5.8.6, log source = /proc/kmsg started. Aug 23 13:47:01 xeon rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="582" x-info="http://www.rsyslog.com"] start Aug 23 13:47:01 xeon rsyslogd: rsyslogd's groupid changed to 103 Aug 23 13:47:01 xeon rsyslogd: rsyslogd's userid changed to 101 Aug 23 13:47:00 xeon rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpuset Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 23 13:47:01 xeon kernel: [ 0.000000] Initializing cgroup subsys cpuacct Aug 23 13:47:01 xeon kernel: [ 0.000000] Linux version 3.11.0-26-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #45~precise1-Ubuntu SMP Tue Jul 15 04:02:35 UTC 2014 (Ubuntu 3.11.0-26.45~precise1-generic 3.11.10.12) Aug 23 13:47:01 xeon kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-26-generic root=UUID=0daa7f53-6c74-47d2-873e-ebd339cd39b0 ro splash quiet vt.handoff=7 Aug 23 13:47:01 xeon kernel: [ 0.000000] KERNEL supported cpus: Aug 23 13:47:01 xeon kernel: [ 0.000000] Intel GenuineIntel Aug 23 13:47:01 xeon kernel: [ 0.000000] AMD AuthenticAMD Aug 23 13:47:01 xeon kernel: [ 0.000000] Centaur CentaurHauls Aug 23 13:47:01 xeon kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Aug 23 13:47:01 xeon kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable Aug 23 13:47:01 xeon kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved Dmseg - nothing strange.

  Read the article

• Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

  - by Kieron

  System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

  Read the article

• After 10 Years, MySQL Still the Right Choice for ScienceLogic's "Best Network Monitoring System on the Planet"

  - by Rebecca Hansen

  ScienceLogic has a pretty fantastic network monitoring appliance.  So good in fact that InfoWorld gave it their "2013 Best Network Monitoring System on the Planet" award.  Inside their "ultraflexible, ultrascalable, carrier-grade" enterprise appliance, ScienceLogic relies on MySQL and has since their start in 2003.  Check out some of the things they've been able to do with MySQL and their reasons for continuing to use MySQL in these highlights from our new MySQL ScienceLogic case study. Science Logic's larger customers use their appliance to monitor and manage  20,000+ devices, each of which generates a steady stream of data and a workload that is 85% write. On a large system, the MySQL database: Averages 8,000 queries every second or about 1 billion queries a day Can reach 175,000 tables and up to 20 million rows in a single table Is 2 terabytes on average and up to 6 terabytes "We told our customers they could add more and more devices. With MySQL, we haven't had any problems. When our customers have problems, we get calls. Not getting calls is a huge benefit." Matt Luebke, ScienceLogic Chief Software Architect.? ScienceLogic was approached by a number of Big Data / NoSQL vendors, but decided against using a NoSQL-only solution. Said Matt, "There are times when you really need SQL. NoSQL can't show me the top 10 users of CPU, or show me the bottom ten consumer of hard disk. That's why we weren't interested in changing and why we are very interested in MySQL 5.6. It's great that it can do relational and key-value using memcached." The ScienceLogic team is very cautious about putting only very stable technology into their product, and according to Matt, MySQL has been very stable: "We've been using MySQL for 10 years and we have never had any reliability problems. Ever." ScienceLogic now uses SSDs for their write-intensive appliance and that change alone has helped them achieve a 5x performance increase. Learn more>> ScienceLogic MySQL Case Study MySQL 5.6 InnoDB Compression options for better SSD performance Tuning MySQL 5.6 for Great Product Performance - on demand webinar Developer and DBA Guide to MySQL 5.6 white paper Guide to MySQL and NoSQL: The Best of Both Worlds white paper

  Read the article

• Getting WLAN on my Laptop to work (Medion MD98300)

  - by Anand Böhmer

  Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

  Read the article

• Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

  - by Brian Spisak

  This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

  Read the article

• Ubuntu won't connect to wired network

  - by djeikyb

  I'm running 10.04, upgraded from 9.10, maybe, but probably not upgraded from 9.04. I have two wifi routers. Zeus is connected to the dsl modem. Hermes uses a wds bridge with Zeus to extend the network. My desktop (Daedalus) is ethernetted to Hermes. My laptop (Clyde) is wifi, switching to Hermes or Zeus as needed. Occasionally, as in whenever I transfer a large file from desktop to laptop, the wds bridge will die. Fixing it means restarting both routers, though it seems Hermes should boot first. This is ridiculous, and eventually I'll get around to asking you guys to help me stop it from happening. More importantly is that my desktop requires a reboot to get back on the network. WTF. ifconfig shows my nic has no ip. /etc/init.d/networking restart doesn't do anything, not even give me a lousy ip. dhcpcd eth1 grants me an ip address, but doesn't help with internet access. route -n shows what looks like my normal routing table, but pinging google.com informs me it's an unknown host. jake@daedalus:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth1 It may be worth noting that I can ping both Zeus (10.1.1.1) and Hermes (10.1.1.4) and my laptop (10.1.1.55). Much obliged for any help. Rebooting is, well, trivial in this instance. But it's stupid. I switched to linux because I like the idea that if one part breaks, you fix it instead of reboot reboot reboot. I've left my poor desktop in disarray, confining myself to my little netbook. My desktop is broken, awaiting magical commands from you brilliant folk. (and yes, i know clyde the netbook should be named icarus. it was its original name. ironically the ssd burned out, and i felt it wasn't right when it came to reinstalling)

  Read the article

• What is the rationale behind snazzy Window Managers/Composers?

  - by Emanuele

  This is more of a generic question, based on trying out Window Managers like Awesome, Mate and others. To me looks like that other Window Managers like Gnome3 and/or Unity are heavy and pointless. I do understand that having all the composed UIs is more pleasant for the eye, but apart that, what are the other major benefits? To make an example, when I run the game Heroes of Newerth (using nVidia drivers) under: Unity : the FPS drops sharply Gnome3 : FPS is ok, but X and other processes use 15~20% of CPU and quite some additional memory Awesome : FPS is ok, and other processes use very little memory and CPU Below some numbers regarding what I'm saying (please note my system is 64 bit, AMD Phenom II X4, 8 GB RAM, nd nVidia 470 GTX, SSD disk). All data is sorted by mem usage (watch -d -n 10 "ps -e -o pcpu,pmem,pid,user,cmd --sort=-pmem | head -20"); again note that CPU time of ./hon-x86_64 might be different due to the fact I can't take the snapshot of the system during exactly same time. Awesome: %CPU %MEM PID USER CMD 91.8 21.6 3579 ema ./hon-x86_64 2.4 0.9 3223 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.6 0.4 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- -noshell -noinp 0.3 0.2 3602 ema gnome-terminal 0.0 0.2 2698 ema /usr/bin/python /usr/lib/desktopcouch/desktopcouch-service Gnome3: %CPU %MEM PID USER CMD 82.7 21.0 5528 ema ./hon-x86_64 17.7 1.7 5315 ema /usr/bin/gnome-shell 5.8 1.2 5062 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.0 0.4 5657 ema /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon 0.7 0.3 5331 ema nautilus -n 1.6 0.3 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- - 0.9 0.2 5451 ema gnome-terminal 0.1 0.2 5400 ema /usr/bin/python /usr/lib/desktopcouch/desktopcouch-service Unity 3D: %CPU %MEM PID USER CMD 87.2 21.1 6554 ema ./hon-x86_64 10.7 2.6 6105 ema compiz 17.8 1.1 5842 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 1.3 0.9 6672 root /usr/bin/python /usr/sbin/aptd 0.4 0.4 6606 ema /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon 0.5 0.3 6115 ema nautilus -n 1.5 0.3 2600 ema /usr/lib/erlang/erts-5.8.5/bin/beam.smp -Bd -K true -A 4 -- -root /usr/lib/erlang -progname erl -- -home /home/ema -- -noshell -noinput -sasl errl 0.3 0.2 6180 ema /usr/lib/unity/unity-panel-service So my point is, what's the rationale behind going towards such heavy WMs/Composers?

  Read the article

• Why would more CPU cores on virtual machine slow compile times?

  - by Sid

  [edit#2] If anyone from VMWare can hit me up with a copy of VMWare Fusion, I'd be more than happy to do the same as a VirtualBox vs VMWare comparison. Somehow I suspect the VMWare hypervisor will be better tuned for hyperthreading (see my answer too) I'm seeing something curious. As I increase the number of cores on my Windows 7 x64 virtual machine, the overall compile time increases instead of decreasing. Compiling is usually very well suited for parallel processing as in the middle part (post dependency mapping) you can simply call a compiler instance on each of your .c/.cpp/.cs/whatever file to build partial objects for the linker to take over. So I would have imagined that compiling would actually scale very well with # of cores. But what I'm seeing is: 8 cores: 1.89 sec 4 cores: 1.33 sec 2 cores: 1.24 sec 1 core: 1.15 sec Is this simply a design artifact due to a particular vendor's hypervisor implementation (type2:virtualbox in my case) or something more pervasive across more VMs to make hypervisor implementations more simpler? With so many factors, I seem to be able to make arguments both for and against this behavior - so if someone knows more about this than me, I'd be curious to read your answer. Thanks Sid [edit:addressing comments] @MartinBeckett: Cold compiles were discarded. @MonsterTruck: Couldn't find an opensource project to compile directly. Would be great but can't screwup my dev env right now. @Mr Lister, @philosodad: Have 8 hw threads, using VirtualBox, so should be 1:1 mapping without emulation @Thorbjorn: I have 6.5GB for the VM and a smallish VS2012 project - it's quite unlikely that I'm swapping in/out trashing the page file. @All: If someone can point to an open source VS2010/VS2012 project, that might be a better community reference than my (proprietary) VS2012 project. Orchard and DNN seem to need environment tweaking to compile in VS2012. I really would like to see if someone with VMWare Fusion also sees this (for VMWare vs VirtualBox compartmentalization) Test details: Hardware: Macbook Pro Retina CPU : Core i7 @ 2.3Ghz (quad core, hyper threaded = 8 cores in windows task manager) Memory : 16 GB Disk : 256GB SSD Host OS: Mac OS X 10.8 VM type: VirtualBox 4.1.18 (type 2 hypervisor) Guest OS: Windows 7 x64 SP1 Compiler: VS2012 compiling a solution with 3 C# Azure projects Compile times measure by VS2012 plugin called 'VSCommands' All tests run 5 times, first 2 runs discarded, last 3 averaged

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• Why doesn't Ubuntu detect my second hard drive?

  - by user93179

  I am new to Linux and to Ubuntu, I was wondering, I have two hard drives setup in SATA ports (non-raid, at least I don't think they are). I installed ubuntu unto the drives fresh without any previous versions or windows at all. However when I got the Ubuntu 12.04 LTS working, all I see is 1 x 120 gigabyte harddrive. Also, not sure if this is important or not, my hard drives are SSD. My computer specs are Asus P9Z77-V-LK Nvidia Geforce GTX 660 TI Intel i5 3570k 3.4 /proc/partitions shows: major minor #blocks name 8 0 117220824 sda 8 1 117219328 sda1 8 16 117220824 sdb 8 17 96256 sdb1 8 18 108780544 sdb2 8 19 8342528 sdb3 11 0 1048575 sr0 and ls -l /sys/block/ | grep -v /virtual/: lrwxrwxrwx 1 root root 0 Sep 27 17:26 sda - ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Sep 27 17:26 sdb - ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb lrwxrwxrwx 1 root root 0 Sep 27 22:26 sdc - ../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6/target6:0:0/6:0:0:0/block/sdc lrwxrwxrwx 1 root root 0 Sep 27 22:04 sr0 - ../devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sr0 sudo file -s /dev/sd*: /dev/sda: x86 boot sector; partition 1: ID=0x7, starthead 32, startsector 2048, 234438656 sectors, code offset 0xc0, OEM-ID " ?", Bytes/sector 190, sectors/cluster 124, reserved sectors 191, FATs 6, root entries 185, sectors 64514 (volumes 32 MB) , physical drive 0x7e, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled /dev/sdb2: Linux rev 1.0 ext4 filesystem data, UUID=387761ac-5eba-4d0f-93ba-746a82fb541d (needs journal recovery) (extents) (large files) (huge files) /dev/sdb3: data /dev/sdc: x86 boot sector; partition 1: ID=0xc, active, starthead 0, startsector 8064, 30473088 sectors, code offset 0xc0 /dev/sdc1: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 64, reserved sectors 944, Media descriptor 0xf8, heads 128, hidden sectors 8064, sectors 30473088 (volumes 32 MB) , FAT (32 bit), sectors/FAT 3720, Backup boot sector 8, serial number 0xf90c12e9, label: "KINGSTON " /dev/sda1: x86 boot sector, code offset 0x52, OEM-ID "NTFS ", sectors/cluster 8, reserved sectors 0, Media descriptor 0xf8, heads 255, hidden sectors 2048, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled Any help would be greatly appreciated! Thanks Another thing I noticed is, when i use gparted to locate my drives, it seems that sda1 is my second drive that I am not detecting when I boot up and my ubuntu + FAT Boot files are installed in sdb1

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• i5 540M or i7 720QM for laptop running VMs and software development tools?

  - by Donald Hughes

  I'm a software developer that would primarily be running Windows 7 as the primary operating system. On a typical day, I might, at any given moment, be running Visual Studio, Expression Web, SQL Server developer (and Management Console), IIS, Photoshop, a dozen browser tabs in 2-3 different browsers, Skype video chat, streaming music, and a couple of VMs (WinXP and Ubuntu) for testing/experimentation. Obviously, RAM is a concern, which is why I plan to use 8 GB so I can devote enough to the VMs to be usable. I'm also tempted to use an ExpressCard SSD for storing the VM disks to ease disk contention. And I know that that is asking a lot from a laptop, and I should just use a desktop, but I need to be able to take my work with me between several locations. It seems that at a reasonable price point, it comes down to the i5 540M versus the i7 720QM. I'm leaning toward the i7 since it would allow me to dedicate a whole hyperthreaded core to each VM, and still have two cores left for the primary OS. I've heard that the i5 has better battery life, but I'm curious for my scenario if there would be a meaningful difference. I don't usually work without a plug, but I do occasionally ride the train or fly and it would be nice to have at least 3 hours of juice for unusual circumstances. And, finally, for this usage scenario, would a dedicated video option be preferred over the i5's integrated video? It sounds like Visual Studio 2010 (and Windows 7) can take advantage of the video card.

  Read the article

• Windows 7 wont boot from any boot loader except for 'Windows Boot Manager' after partition resize

  - by user2468327

  I have a triple boot system on a single SSD. OSX, Windows 7, and Ubuntu. I use Chimera (basically another version of Chameleon) as my boot loader. Usually I can boot all 3 without any issue, but after using GParted to make my Ubuntu partition 2 Gigs larger, Windows 7 throws me an error when trying to boot to it from either Chimera or Grub. The error is consistently: 0xc000000e "cant find \Boot\BCD" (slightly paraphrased). However, I can still get into Windows by selecting "Windows Boot Manager" from the boot options in my bios. I've already tried several known fixes for similar issues, including bootrec /rebuildbcd (and variations), and BootRec.exe/fixMBR + BootRec.exe/fixBoot. Ive also tried Chkdsk. At best this has made it so Windows 7 boots on it's own by default (making me have to reinstall Chimera and change back my boot settings in the bios). At worst this made it so Windows wont boot period. Now I'm back full circle where I started. A detail that might be useful is that bootrec /rebuildbcd says that the number of found Windows installations is 0. How do I get it back so I can boot Win7 through another boot loader so I don't have to manually select it in the bios? Preferably without a reinstall.

  Read the article

• PECL install error after upgrading to OSX 10.8

  - by Clive

  I've just upgraded my OS to Mountain Lion and PECL is no longer working (it's on a test drive so no drama, but I'd like to get it working so I can upgrade the OS on my shiny new SSD as well). I'm using the native PHP installation, no macports/homebrew or anything like that. Running sudo pecl install uploadprogress (for example) produces the following terminal output: downloading uploadprogress-1.0.3.1.tgz ... Starting to download uploadprogress-1.0.3.1.tgz (9,040 bytes) .....done: 9,040 bytes 4 source files, building running: phpize grep: /usr/include/php/main/php.h: No such file or directory grep: /usr/include/php/Zend/zend_modules.h: No such file or directory grep: /usr/include/php/Zend/zend_extensions.h: No such file or directory Configuring for: PHP Api Version: Zend Module Api No: Zend Extension Api No: autom4te: need GNU m4 1.4 or later: /usr/bin/m4 ERROR: `phpize' failed I'm guessing the problem is the 3 grep lines. I've found several threads that suggest this is caused by XCode not being installed...but XCode is installed, and updated to the latest version (4.4). All the relevant symlinks to /Developer/usr/bin/* also exist as they should. m4 is currently at version: m4 (GNU M4) 1.4.13, so even though the output above contains a line pertaining to it, I don't think that can be the problem. I'm sure it's just a simple issue, anyone got any clues?

  Read the article

• How to make sysctl network bridge settings persist after a reboot?

  - by user183394

  I am setting up a notebook for software demo purpose. The machine has 8GB RAM, a Core i7 Intel CPU, a 128GB SSD, and runs Ubuntu 12.04 LTS 64bit. The notebook is used as a KVM host and runs a few KVM guests. All such guests use the virbr0 default bridge. To enable them to communicate with each other using multicast, I added the following to the host's /etc/sysctl.conf, as shown below net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Afterwards, following man sysctl(8), I issued the following: sudo /sbin/sysctl -p /etc/sysctl.conf My understanding is that this should make these settings persist over reboots. I tested it, and was surprised to find out the following: root@sdn1 :/proc/sys/net/bridge# more *tables :::::::::::::: bridge-nf-call-arptables :::::::::::::: 1 :::::::::::::: bridge-nf-call-ip6tables :::::::::::::: 1 :::::::::::::: bridge-nf-call-iptables :::::::::::::: 1 All defaults are coming back! Yes. I can use some kludgy "get arounds" such as putting a /sbin/sysctl -p /etc/sysctl.conf into the host's /etc/rc.local but I would rather "do it right". Did I misunderstand the man page or is there something that I missed? Thanks for any hints. -- Zack

  Read the article

• Win7 Pro x64 task manager hangs when restarting explorer.exe after waking from sleep

  - by Brandon Dybala

  I have a desktop running Windows 7 x64 Pro, set for Hybrid Sleep on a wired network. Wakeup is only enabled from the keyboard (wake on mouse and Wake-On-LAN are both disabled). Sometimes when it wakes up, there is no network connectivity. The notification area icons for both network and volume don't respond to clicks. If I open the Network and Sharing Center, clicking the red X doesn't do anything. Restarting does fix the problem, but I'm looking for a solution that does not require restarting (if at all possible). Drivers are all up to date. I've tried opening Task Manager and restarting the explorer.exe process, but Task Manager freezes for a few minutes, the "New Task" dialog closes, and explorer.exe has not restarted. CPU and memory usage are both normal. One thread suggested making sure the BIOS was set for S3 sleep mode only (not S1 or S1 & S3), but I haven't checked this yet. Going back to sleep and waking back up does not help. So far only a reboot has fixed the issue. System specs: Windows 7 x64 Pro Asus P8Z68-V PRO/GEN3 128 GB Crucial m4 SSD (Firmware version 0309) Intel Core i7 2600 3.4 GHz 16 GB RAM Any ideas? Brandon

  Read the article

• Strange performance issue with Dell R7610 and LSI 2208 RAID controller

  - by GregC

  Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

  Read the article

• Visual Studio 2012 Very Slow Typing

  - by DaoCacao

  I have a problem. After SP1 update, passing some time, VS 2012 becomes very-very slow when typing text. Solution size is not big, PC is quite powerful, it has 16GB of RAM, SSD drive, and i7-2600. I have attached using another VS and I see in debugger a lot of exceptions: First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC (KernelBase.dll) in devenv.exe: 0xE0434352 (parameters: 0x80131509, 0x00000000, 0x00000000, 0x00000000, 0x64BF0000). First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC in devenv.exe: Microsoft C++ exception: CVcsException at memory location 0x0027DF0C. First-chance exception at 0x753BB9BC (KernelBase.dll) in devenv.exe: 0xE0434352 (parameters: 0x80131509, 0x00000000, 0x00000000, 0x00000000, 0x64BF0000). The thread 0x288c has exited with code 0 (0x0). Anyone have any ideas on what CVcsException is? Googling it gives almost nothing. How do I get rid of this problem?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >