Search Results

Search found 19966 results on 799 pages for 'wild thing'.

Page 44/799 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• preseeded installation keeps asking for confirmation while creating RAID-Partitions on certain hardware-platform

  - by Marc Shennon

  I am aware of the partman-md/confirm_nooverwrite thing, that was the solution to most of this problems in the past. The thing is, that the preseed-file works for almost all hardware-platforms I tested, but only for one (Primergy MX130) it keeps asking for confirmation, before writing the partition-layout to the disks. All machines I tested are running with two SATA Disks, nothing special. I'm not really sure, what information could be needed in order to investigate the cause of this behaviour, but I would of course be willing to provide more information, if someone has an idea. Relevant part of the preseed file is the following: d-i partman-auto/disk string /dev/sda /dev/sdb d-i partman-auto/method string raid d-i partman-md/confirm boolean true d-i partman-partitioning/confirm_write_new_label boolean true d-i partman-md/device_remove_md boolean true d-i partman/choose_partition select finish d-i partman-md/confirm_nooverwrite boolean true # Write the changes to disks? d-i partman/confirm boolean true d-i mdadm/boot_degraded boolean true # RECIPE # Next you need to specify the physical partitions that will be used. d-i partman-auto/expert_recipe string \ multiraid :: \ 500 10000 1000000000 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 512 1000 786 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 8192 10240 10240 raid $lvmignore{ }\ method{ raid } \ . # Parameters are: # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> <devices> <sparedevices> d-i partman-auto-raid/recipe string \ 1 2 0 ext4 / /dev/sda1#/dev/sdb1 . \ 1 2 0 ext2 /boot /dev/sda2#/dev/sdb2 . \ 1 2 0 swap - /dev/sda5#/dev/sdb5 .

  Read the article

• I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc

  - by talkingnews

  I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

  Read the article

• Which things instantly ring alarm bells when looking at code? [closed]

  - by FinnNk

  I attended a software craftsmanship event a couple of weeks ago and one of the comments made was "I'm sure we all recognize bad code when we see it" and everyone nodded sagely without further discussion. This sort of thing always worries me as there's that truism that everyone thinks they're an above average driver. Although I think I can recognize bad code I'd love to learn more about what other people consider to be code smells as it's rarely discussed in detail on people's blogs and only in a handful of books. In particular I think it'd be interesting to hear about anything that's a code smell in one language but not another. I'll start off with an easy one: Code in source control that has a high proportion of commented out code - why is it there? was it meant to be deleted? is it a half finished piece of work? maybe it shouldn't have been commented out and was only done when someone was testing something out? Personally I find this sort of thing really annoying even if it's just the odd line here and there, but when you see large blocks interspersed with the rest of the code it's totally unacceptable. It's also usually an indication that the rest of the code is likely to be of dubious quality as well.

  Read the article

• Any website/software where i can add some text rows on daily basis

  - by Moorage

  I have few notes or text like few remembering lines on daily or weekly basis. I want to write it. but i should be able to see at any backdate /monthly or yearly. The date-time should also be stored when i enter text. is it possible EDIT: I will explain clearly what i exactly want. Suppose while working on internet 1)i find "ABC is good for BCD". now i want to add that text to some online site where i can see later 2)Now i can add those type of things any time and on internet i can see that in tabular form like click to see montly list , yearly or weekly 3)Other thing is i should be able to add text as easy as possible like in firefox if i can press some shotcut and enter something and it gets added there rather than opening the site and then write The to do list do that sort of thing but they dont have creation date , rather they filter based on due date.

  Read the article

• C++: calling non-member functions with the same syntax of member ones

  - by peoro

  One thing I'd like to do in C++ is to call non-member functions with the same syntax you call member functions: class A { }; void f( A & this ) { /* ... */ } // ... A a; a.f(); // this is the same as f(a); Of course this could only work as long as f is not virtual (since it cannot appear in A's virtual table. f doesn't need to access A's non-public members. f doesn't conflict with a function declared in A (A::f). I'd like such a syntax because in my opinion it would be quite comfortable and would push good habits: calling str.strip() on a std::string (where strip is a function defined by the user) would sound a lot better than calling strip( str );. most of the times (always?) classes provide some member functions which don't require to be member (ie: are not virtual and don't use non-public members). This breaks encapsulation, but is the most practical thing to do (due to point 1). My question here is: what do you think of such feature? Do you think it would be something nice, or something that would introduce more issues than the ones it aims to solve? Could it make sense to propose such a feature to the next standard (the one after C++0x)? Of course this is just a brief description of this idea; it is not complete; we'd probably need to explicitly mark a function with a special keyword to let it work like this and many other stuff.

  Read the article

• Ubuntu One, compressed files

  - by user8179

  I have uploaded some files to my Ubuntu One account and it seems to work great most of the time. I usually upload them directly from Nautilus by right clicking the folder, using the ”Synchronize this folder” option, and then I make sure that the file I want to upload is published. Then I usually test the whole thing by trying to download it. I right click the file again to get its URL and I paste it into my Web browser. This usually works fine. But yesterday I uploaded two compressed files – ”.tar.bz2”. When I tried to open them after downloading them with my Web browser (Opera), it failed. I found that the file was bigger than the original file (2358 B instead af 2335 B – 15 B added at the beginning of the file and 8 B added to the end), and someone at the Opera channel (IRC) at OperaNet (Europe) figured out that the reason for this is that the server compress the file again, ”without telling Opera”. So to be able to extract the file I need to add ”.gz” to the file name and then extract it twice. If I downloaded it with Firefox however, I didn't need to do that, so maybe Firefox figured this out somehow in a way that Opera does not. Someone also tried to download the file with wget and some other browser and he also got the same result as I did with Opera, that is the file is compressed a second time by the server. I guess ”the server” is the Ubuntu One server, right? So why is this? Could it be done better somehow? Or did I do something wrong when uploading the files? It also seems like this extra compressing thing does not always happen, because when I tried again a few minutes ago, the file came down with its right size (2335 B), without an extra compression. But the other file (114 MiB) was still compressed twice.

  Read the article

• Why does my webpage look different when I connect using different routers?! Does routers cache files?

  - by Ayyash

  Here is the case, I am working on a site from office and home, I recently updated the stylesheets and logged in the live site from office (using my same laptop I use all the time), and everything looks okay, I come home use my home internet connection to connect to the site using the SAME laptop, the styles are not updated! The thing is: this happens on ALL browsers, and after emptying the cache many times, and even after one month of work, and even if I have never opened the site before on that browser (as if my router has a cache of its own) Another thing: only one particular styles.css file seem to be hanging Extra info: I use the same IP for my home wireless router as that defined in the office, the usual 192.168.0.1

  Read the article

• When can I publish a software tool written at work?

  - by AlexMA

  I'm working on a software problem at work that is fairly generic, but I can't find a library I like to solve it, so I'm considering writing one myself (at least a bare-bones version). I'll be writing some if not all of the 1.0 version at work, since I need it for the project. If turns out well I might want to bring the work home and polish it up just for fun, and maybe release it as an open-source project. However, I'm concerned that if I wrote the 1.0 version at work I may not be allowed to do this from a legal sense. Obviously I could ask my boss (who probably won't care), but I'm curious how other programmers have dealt with this issue and where the law stands here. My one sentence question is, When is it okay (legally/ethically) to open-source a software tool originally written by you for work at work? What if you have expanded the original source significantly during off-hours? Follow-up: Suppose I write the whole thing at home on my time then simply use it at work, does that change things drastically? Follow-up 2: Note that I'm not trying to rip off my employer (I understand that they're paying me to build products that they own)--I'm just wondering if there's a fair way of doing this for all involved... It would be nice if some nonprofit down the road could use my code and save them some time. Also, there's another issue at stake. If I write the library for a very simple, generic thing (like HTML tables in Javascript), does that mean I can never again do so on my own time without putting myself at legal risk (even if it was a whole new fresh rewrite or a segment of a larger project). Am I surrendering my right to write code for this sort of project for the rest of my life (without this company's permission), since the code at work might still be somewhere in my brain influencing me? This seems related to software patents, as a side-note.

  Read the article

• Windows Azure v1.7 Spring Release Today&ndash;New Management Dashboard

  - by ToStringTheory

  Today, Microsoft will be publicly releasing a new version of Azure for public consumption.  The web conference, at http://www.meetwindowsazure.com will be airing at 1 PM PST.  They have already released an update to the Service Dashboard that can be accessed by going to http://manage.windowsazure.com.  I have some images of the new dashboard here that I have gathered and removed any PII from.  Let me know what you think! Images You should be able to click any of the images for a full resolution image. Tutorial The first thing you get after signing in is the tutorial: Landing After the tutorial completes, you get a screen with services that are active on your account on the left, and a list of ALL services (db/blob/SQL Azure) on the right.  I like the quick access to services across any of my subscriptions: Service Information These are images from a running web site with several roles.  I love how easy they have made many of the features: SQL Azure They have given some great quick functionality for looking at your DB information: Storage Here is the basic information that they give you for any storage accounts you have: Adding Services Super quick and easy to add services with the new UI: Conclusion I am EXCITED!  As you may have seen in the left side of my blog, I am an MCPD in Azure Development, and I must say that I am excited to see Microsoft moving forward with the technology and not letting it stagnate.  After as much as I have fought the other Azure dashboard, I like the friendliness and fluidity of this one. The important thing to note about ALL of the images above: this is HTML, not Silverlight.  The responsiveness is FAST on all of the actions I completed, and I believe that this is a big step forward for Azure… So, what do you think?

  Read the article

• Fault Handling Slides and Q&A by Vennester

  - by JuergenKress

  Fault Handling It is one thing to architect, design, and code the “happy flow” of your automated business processes and services. It is another thing to deal with situations you do not want or expect to occur in your processes and services. This session dives into fault handling in Oracle Service Bus 11g and Oracle SOA Suite 11g, based on an order-to-cash business process. Faults can be divided into business faults, technical faults, programming errors, and faulty user input. Each type of fault needs a different approach to prevent them from occurring or to deal with them. For example, apply User Experience (UX) techniques to improve the quality of your application so that faulty user input can be prevented as much as possible. This session shows and demos what patterns and techniques can be used in Oracle Service Bus and Oracle SOA Suite to prevent and handle technical faults as well as business faults. Q&A This section lists answers to the questions that were raised during the preview event. Q: Where can retries be configured in Oracle Service Bus? The retry mechanism is used to prevent faults caused by temporary glitches such as short network interruptions. A faulted message is resend (retried) and might succeed this time since the glitch has passed. Retries are an out-of-the-box feature that can be used in Oracle Service Bus and Oracle SOA Suite using the Fault Policy framework. By default, retries are disabled in Oracle Service Bus. Read the full article. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: fault handling,vennester,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Contractor - Mispaid again - Walked out

  - by MeshMan

  Hi all, I'm wondering whether or not I've done the right thing as a contractor. Basically I'm in to my 3rd month, and my current client messed up the payment in the first month, and I just found out that they are again late in paying me for my 2nd month. It wouldn't be so bad if I wasn't in a bit of a financial situation due to this being my first contract experience. But as a matter of principal, I walked out on them and will be telling them that I will not be going back in until they resolve the pay. Part of me feels as though this was not a very professional thing to do, but I also don't feel that it was very professional for them to mess my payments up, twice in a row. Did I make the right decision? I still want to work for these guys and enjoy the job, but I have a life to attend to that requires finances and I can't afford to keep getting messed up with pay like this. I attempted to phrase the question to be oriented around contractors behaviour around clients that mis-treat them, and as some of the answers that have been posted so far, it's a good discussion. The answers coming in are great around different subjective situations.

  Read the article

• So my employer wants me to do less programming and focus on IT support

  - by Rich

  I was hired into a non tech company's IT department as a programmer a few years back, and after several rounds of lay offs, we're down to a skeleton crew. I've saved the company hundreds of thousands of dollars with my projects and management has been happy with them (although most of the stakeholders have since left the company). Management now wants me to limit the programming that I do and spend most of my time on IT support: putting out fires, dealing with vendors, outsourced contractors, supporting company systems, managing projects, etc. I am a little burnt out on programming since I've been pushed pretty hard for the past several years. However, I'm not sure if this is a good career move in the long run. I'm a decent programmer (and also good with databases) but not obsessed with it to the point of coding outside of work. I'm approaching my mid 30s and there's potential ageism to deal with down the line. While I'm fortunate to have survived the lay offs, it sorta feels like my job is being "dumbed down". I have both good technical skills and people skills...but it doesn't take a genius to do what I'm doing now. And my success is being increasingly linked to others' performance rather than my own... Just looking for some advice. Is it time to move on? That's not really an easy thing to do since I'd likely have to move to another area to find another comparable tech job. Should I go after another pure technical role? Or should I stay and try to make this work? People say do what you "enjoy" but it doesn't really matter to me as long as I'm getting paid. Also the ageism thing is on the horizon and could be an issue eventually. I'm making a decent (but not great) salary. Should I chase money and maximize my income while I still have a chance? Or be happy with a moderate salary and 40 hour work week?

  Read the article

• Migrating My GWB Blog Over To WordPress

  - by deadlydog

  Geeks With Blogs has been good to me, but there are too many tempting things about Word Press for me to stay with GWB.  Particularly their statistics features, and also I like that I can apply specific tags to my posts to make them easier to find in Google (and I never was able to get categories working on GWB). The one thing I don’t like about WordPress is I can’t seem to find a theme that stretches the Content area to take up the rest of the space on wide resolutions…..hopefully I’ll be able to overcome that obstacle soon though. For those who are curious as to how I actually moved all of my posts across, I ended up just using Live Writer to open my GWB posts, and then just changed it to publish to my WordPress blog.  This was fairly painless, but with my 27 posts it took probably about 2 hours of manual effort to do.  Most of the time WordPress was automatically able to copy the images over, but sometimes I had to save the pics from my GWB posts and then re-add them in Live Writer to my WordPress post.  I found another developers automated solution (in alpha mode), but opted to do it manually since I wanted to manually specify Categories and Tags on each post anyways.  The one thing I still have left to do is move the worthwhile comments across from the GWB posts to the new WordPress posts. The largest pain point was that with GWB I was using the Code Snippet Plugin for Live Writer for my source code snippets, and when they got transferred over to WordPress they looked horrible.  So I ended up finding a new Live Writer plugin called SyntaxHighlighter that looks even nicer on my posts If anybody knows of a nice WordPress theme that stretches the content area to fit the width of the screen, please let me know.  All of the themes I’ve found seem to have a max width set on them, so I end up with much wasted space on the left and right sides.  Since I post lots of code snippets, the more horizontal space the better! So if you want to continue to follow me, my blog's new home is now at https://deadlydog.wordpress.com

  Read the article

• What software can I use to create a video of following type?

  - by Bond

  Here is a video on this link http://www.youtube.com/watch?v=kSx873lOgIc&feature=player_embedded#at=62 Someone among my bosses wants to create some thing similar to the video on above link and has asked me what software can they use to do the same.The purpose is to create educational content only.Which can have the demonstrations (animations ) and audio also running in backend. I am not clear as what software can be used for this on Linux or Windows. I have users which use Windows and Linux both. I have used video editing on Mac using Final Cut Pro but the video on the above link is not some thing which can be achieved with FCP.(Or may be I am not aware) I am looking solution for 1) Linux users 2) Windows users In case of Linux it is Ubuntu for some users and Fedora for some others. I am a Linux guy so I am specifically posting this question in terms of Ubuntu but I also need suggestions for Windows type of users.I have no clue of such video animations at all.

  Read the article

• Can I remove a RAR file's (known) password without recompressing the archive?

  - by Abluescarab

  Long title. Anyway, I haven't been able to find an answer to this question. I know the password to the RAR file, I locked it myself, but now all I want to do is remove the password because it's too much of a pain in the butt to type it in every time. Is there a way to do this in WinRAR or an equivalent program? The only thing I knew to do was to extract it, then create a new RAR without the password. It's not a life-or-death issue, but it would be nice to know. Thanks for your time! EDIT: I just saw a bunch of related questions that appear to ask the same thing. The only solution I saw was using a DOS command to yadda yadda yadda. Here it is: How to remove password protection from compressed files Is there an easier way? Thanks again!

  Read the article

• How to move mail among Google Apps for Domains users

  - by Paul Roub

  Considering moving the domain used by my extended family for email to Google Apps. One less server for me to manage, better spam filtering, etc. One thing that's been nice about running my own has been the way I manage my kids' incoming email - it comes to me first, and I drop good mail in a symlinked IMAP folder that we share. A little procmail is all it takes, and straight-through exceptions are easy to implement. (FYI, no I'm not advocating censorship, but manually filtering spam and viruses from my 8-year-old's inbox seems like the right thing to do. YMMV) Anyway. I'm wondering if there's an easy way to do something similar in Google Apps - setting up filters to auto-redirect to me looks easy enough (any gotchas there?), but moving things back is not obvious. Yes, I could access both accounts via IMAP and drag mails across, but does anyone have an easier way?

  Read the article

• Mobile development, recommended computer configuration?

  - by MikaelW

  Hi, For the last 4 weeks, I have been trying to get into mobile development. Done a couple of tutorials, read some books, developed a couple of dummy Android apps. The thing is my computer is a 5 years old laptop, it is slow and time has come to replace it and I’m looking at different offers online. Have you got any recommendations? Is there any must-have that should make my developer life easier in the future? Is there anything specific that may be useful at a more advanced stage of development that I just can’t think of right now on the hardware side? (I mean apart from good proc, lots of RAM, many USB ports...) One thing I can think of is to have three OS on the same workstation: Windows, Unix and MacOS (so far I focused on android/java/eclipse but am interested in Iphone/objC/xcode as well) but that’s more on the software side. Anyway, would be grateful for any recommendations. Thanks in advance! Mikael PS: I’m quite free on the budget side of things PPS: I'm aware it's not really a programming question but will still be of interest to some programmers here.

  Read the article

• NIS AD password synch for new accounts

  - by user135004

  I have a Win2k3R2 DC with NIS. All is working well but its no longer synching the passwords for new accounts. When creating a new AD user, NIS does its thing and sends its Unix account to the synched linux server. It's doing everything its supposed to do but not the users password to the server (getent passwd returns the ABCD!efgh12345$67890 password for the new account). Thinking that password synchronization is not working, I changed the password of an existing working account and it synchs the new password. If I delete a new or old AD user, it deletes it on the linked linux server as well. All this tells me that NIS is doing its thing (at least with existing accounts) No updates have been installed on the DC. I am not even sure where to start here.

  Read the article

• I installed ubuntu, the installer told me to reboot afterwards. I dd, and now linux wont boot

  - by mandy

  Im trying to dual boot between mac 10.6.8 and ubuntu 11.10. I have a macbook pro 8,1. So i installed from a 10.04 disk because the install window makes more sense to me, and it doesnt give me errors or anything. Also, any versions of ubuntu after that dont boot from disk for whatever reason. (i think its having to do with the efi boot thing. i have to get ubuntu 11.10 to boot from a usb with folders bootefiboot.iso) Then my plan after that was after the ubuntu 10.04 install took care of all the swap and stuff for me without being messy, to upgrade to 11.10. So here i have 10.04 booting successfully back and forth from mac osx no problem. I put in my 11.10 usb and the installer gives me the option to "update 10.04 to 11.10" bingo, jackpot, thats what i want. Everything proceeds as normal, as EVERY OTHER install of ubuntu i have ever done, then the installer finishes and says HEY! im finished! Continue testing or reboot now! So i reboot, and what do i get??? A black screen that says the file system isnt found, to enter a boot disk and press any key. WHAT THE HELL????? so i boot the 11.10 installer again from usb, and select "erase 11.10 and install 11.10", installer proceeds normally, and asks me to reboot. I reboot and get the SAME THING. Please, someone, help me get this right here. This is my first time actually dual booting between mac and linux. Usually i just wipe off osx completely and install ubuntu but i actually need to keep my mac partition this time. I have successfully installed 11.10 on this machine before, but that was when i did a clean install. Help?

  Read the article

• WGet from one site on a server to another site on the same server

  - by JoshReedSchramm

  Hey all, I've recently been asked to administer a couple ubuntu boxes running web servers. I'm a dev by trade so if this question is fairly noob please forgive. We have about a dozen sites running on this box. 2 of our sites need to talk back and forth over a restful api. Unfortunately we are having issues with the sited connection to each other via wget. When we try and run wget manually from the command line from the server pointing to a site also on that server it hangs and eventually times out. If we do the same thing from outside the server to the same site on the server it works. Is there something that could be preventing sites on the same server from communicating with each other? The same thing happens pinging the site from the server.

  Read the article

• Failover NIC with Windows 7 running Apache Server

  - by Benjamin Jones

  I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

  Read the article

• Quantify value for management

  - by nivlam

  We have two different legacy systems (window services in this case) that do exactly the same thing. Both of these systems have small differences for the different applications they serve. Both of these system's core functionality lies within a shared library. Most of the time, the updates occur in the shared library and we simply deploy the updated library to both of these systems. The systems themselves rarely change. Since both of these systems do essentially the same thing, our development team would like to consolidate these two systems into a single service. What can I do to convince management to allocate time for such a task? Some of the points I've noted are: Easier maintenance Decrease testing/QA time Unfortunately, this isn't enough. They would like us to provide them with hard numbers on the amount of hours this will save in the future and how this will speed up future development. Since most of the work is done in the shared library and the systems themselves never change, it's hard for us to quantify how many hours this will save. What kind of arguments can I make to justify the extra work to consolidate these systems?

  Read the article

• I believe I need a wireless access point, but can I do it with a wifi router?

  - by Flotsam N. Jetsam

  My needs are simple, I think: I have a laptop upstairs with a usb wifi that I use to connect to my neighbor's wifi which I share (with their knowledge). I have a laser printer downstairs that my wife doesn't wants to stay down there (big, bulky and ugly), but that we both need to print stuff off. It has wired networking and I have wired hub and router down there. The usb wifi on the laptop has absolutley the best reception I've ever seen or heard of. I cannot get onto the neighbor's net with the thing downstairs though--sortof in the ground. What do I need downstairs to give printer access to my laptop wirelessly? One thing I can't do in this solution is have a computer on downstairs, so I would think that would eliminate a usb solution.

  Read the article

• Wifi doesn't connect if I'm upstairs

  - by user11233

  Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

  Read the article

• More productive alone than in a team?

  - by Furry

  If I work alone, I used to be superproductive, if I want to be. Running prototypes within a day, something that you can deploy and use within a few days. Not perfect, but good enough. I also had this experience a few times when working directly with someone else. Everybody could do the whole thing, but it was more fun not to do it alone and also quicker. The right two people can take an admittedly not too large project onto new levels. Now at work we have a seven person team and I do not feel nearly as productive. Not even nearly. Certain stuff needs to be checked against something else, which then needs to also take care of some new requirement, which just came in three days ago. All sorts of stuff, mostly important, but often just a technical debt from long ago or misconception or different vocabulary for the same thing or sometimes just a not too technically thought out great idea from someone who wants to have their say, and so on. Digging down the rabbit hole, I think to myself, I could do larger portions of this work faster alone (and somewhat better, too), but it's not my responsibility (someone else gets paid for that), so by design I should not care. But I do, because certain things go hand in hand (as you may experience it, when you done sideprojects on your own). I know this is something Fred Brooks has written about, but still, what's your strategy for staying as productive as you know you could be in the cubicle? Or did you quit for some related reason; and if so where did you go?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >