Search Results

Search found 25963 results on 1039 pages for 'ask for recommendation'.

Page 441/1039 | < Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >

• Transferring ratings and playlists from Rhythmbox to Clementine

  - by xpanta

  After the latest update, Rhythmbox (which was my main mp3 player on my Ubuntu Latest distro) stopped functioning: it dies just after startup. So, I turned to Clementine which I like a lot. However in Rhythmbox I had my playlists and ratings. Song ratings are very important to me because many of my auto-playlists are depending on them. Is there anyway I can get my playlists and ratings from Rhythmbox and add them to Clementine? Thanks.

  Read the article

• external USB HD doesn't show up on 'sudo fdisk -l' on one Ubuntu, shows up on another (both 'precise')

  - by Menelaos

  I have a 1.5TB WD external USB HDD and two Ubuntu systems, both 'precise'. When I plug the disk on system A it doesn't show up on the output of sudo fdisk -l nor is it automatically mounted (note that that wasn't always the case - it used to appear in the past). When I plug it on system B (again Ubuntu precise) it shows up when I do a sudo fdisk -l (output appended at the end) and mounts automatically just fine. What does this discrepancy point to and what kind of diagnostics should I run / tools I should use to troubleshoot the problem? I followed the suggestion I received to do a sudo tail -f /var/log/syslog and the output is the following when I plug, unplug and replug the USB cable on System A: Sep 14 23:27:09 thorin mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:27:09 thorin mtp-probe: bus: 2, device: 3 was not an MTP device Sep 14 23:28:01 thorin kernel: [ 338.994295] usb 2-2: USB disconnect, device number 3 Sep 14 23:28:04 thorin kernel: [ 341.808139] usb 2-2: new high-speed USB device number 4 using ehci_hcd Sep 14 23:28:04 thorin mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:28:04 thorin mtp-probe: bus: 2, device: 4 was not an MTP device Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting due to inactivity Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting was requested (I guess the last two message are irrelevant). Output of sudo fdisk -l on System B $ sudo fdisk -l Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00070db4 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2905114623 1452556288 83 Linux /dev/sda2 2905116670 2930276351 12579841 5 Extended /dev/sda5 2905116672 2930276351 12579840 82 Linux swap / Solaris Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9c849c84 Device Boot Start End Blocks Id System /dev/sdb1 * 63 488375999 244187968+ 7 HPFS/NTFS/exFAT Disk /dev/sdg: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003e17f Device Boot Start End Blocks Id System /dev/sdg1 2048 2930272255 1465135104 7 HPFS/NTFS/exFAT

  Read the article

• glx not working, optirun works, gnome in fallback mode

  - by user26766

  It all started when I installed nvidia's own driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. Now nvidia-current seems to be functional. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) how can I fix this? thanks,

  Read the article

• Keyboard freezes when xorg crashes

  - by gsedej

  Situation is like that. Many times has happened that Xorg freezes and with it also keyboard. Quite some times because of some Compiz effects or Flash (fullscreen switch). Keyboard becomes totaly unresponsive, while mouse still works (I can move cursor, but can't click since desktop freezes) and music still plays and I can connect trough ssh. This is the only way I know I can try to solve problem - either by killing browser&flash or lastly restarting xorg server. This problem appears on more than one Ubuntu computer. My home dekstop with proprietery nvidia driver, on my work where I use noveau driever (opensource driver for geforce) and sometimes (but rarely) also on laptop with ATI graphics (using r300g driver which is really good!). Can someone explains why mouse still works while I can't input from keyboard? (I can't switch to virtual console or do R-E-I-S-U-B command) I have USB keyboard and USB mouse.

  Read the article

• How do I set image position in conky

  - by realitygenerator

  I copied and modified an existing .conkyrc file from the ubuntu forum and I'm trying to place the LinuxMint logo in a specific position Below are my conkyrc file and the screenshot # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type desktop own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont URW Gothic:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left #alignment top_right #alignment bottom_left #alignment bottom_right. alignment top_middle # Gap between borders of screen and text gap_x 10 gap_y 10 #Display temp in fahrenheit temperature_unit fahrenheit #Choose which screen on which to display # stuff after 'TEXT' will be formatted on screen TEXT $color ${color green}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine LinuxMint 11 "Katya" (Oneric) ${image ~/Conky/Logo_Linux_Mint.png -s 80x60 -f 86400} ${color green}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${hwmon temp 1} $cpubar ${cpugraph 000000 ffffff} NAME PID CPU% MEM% ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4} ${color green}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Root: ${fs_free_perc /}% ${fs_bar 6 /}$color hda1: ${fs_free_perc /media/sda1}% ${fs_bar 6 /media/sda1}$color ${color green}NETWORK (${addr eth1}) ${hr 2}$color Down: $color${downspeed eth1} k/s ${alignr}Up: ${upspeed eth1} k/s ${downspeedgraph eth1 25,140 000000 ff0000} ${alignr}${upspeedgraph eth1 25,140 000000 00ff00}$color Total: ${totaldown eth1} ${alignr}Total: ${totalup eth1} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color green}LOGGING ${hr 2}$color ${execi 30 tail -n3 /var/log/messages | awk '{print " ",$5,$6,$7,$8,$9,$10}' | fold -w50} ${color green}FORTUNE ${hr 2}$color ${execi 120 fortune -s | fold -w50} I want to put the mint logo right after the word (oneric). Any help would be greatly appreciated.

  Read the article

• Creating a bootable flash without overlayfs

  - by Septagram

  I want to create an USB stick to carry my Ubuntu everywhere around with me. It's not intended to spread Ubuntu by installing it everywhere, but rather for running my configured system on any computer I come across. So far, I went with installing Ubuntu with unetbootin, however, I have some issues with this. When installed with netbootin, the original disk image is kept intact on the flash drive, forever. Also, a file is created for persistent storage and during boot it is accessed together with the image by overlayfs. This, in my opinion, has the following problems: If system is updated regularly, then files from the image are overwritten in persistent storage, doubling their size and wasting precious space. Persistent storage has a fixed size that you have to define from the start, again, wasting precious space. I'm not 100% sure, but maybe using overlayfs makes disk access slower, and more so on the relatively slow devices. So I'd like to find another solution: either to get rid of the original image or to install Ubuntu "normally" on the separate ext2 partition, or maybe even install it in the main vfat partition on the USB stick. Suggestions?

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• File doesn't exist when trying to change permissions following the avasys image scan manual

  - by Howard Graham

  I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• Stream sound card output to icecast2 via darkice

  - by Alberto Burgos

  I want to stream to icecast server via darkice, the default .cfg comes with /dev/dsp, witch is OSS, but there is no /dev/dsp in Ubuntu 12.10, so I tried hw:0,0, but it's just the microphone, and I would like to stream all of the sound-card output. Any ideas? cat /proc/asound/cards 0 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xf8700000 irq 16 cat /proc/asound/devices 1: : sequencer 2: [ 0- 0]: digital audio playback 3: [ 0- 0]: digital audio capture 4: [ 0- 0]: hardware dependent 5: [ 0] : control 33: : timer I tried following this post: How can I stream my soundcard output?

  Read the article

• Laptop runs HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• How to switch to a generic kernel in a headless Ubuntu Server 12.04?

  - by chmike

  I just got a dedicated server with Ubuntu 12.04 installed with a custom compiled kernel. Since I would like to install VirtualBox and this custom kernel doesn't support dynamic module loading (for security) I need to change the kernel. I'm running some Ubuntu servers for years but never palyed with grub and a headless computer. When the command update-grub is run it shows the different kernel it finds. Here is what I see Generating grub.cfg ... Found linux image: /boot/bzImage-3.2.13-xxxx-grs-ipv6-64 Found linux image: /boot/vmlinuz-3.2.0-34-generic Found initrd image: /boot/initrd.img-3.2.0-34-generic No volume groups found done The first one is the active one as seen with uname -r. To me it looks like the second kernel is the one I should use. But I don't know how to configure grub2 to use it. The computer is also configured with a software RAID using mdadm I guess. Never used that before. I don't know if playing with the grub of changing kernel could brake this. What must I do to set the generic kernel as the default one so that I can get VirtualBox running.

  Read the article

• Nautilus window initial geometry with Gnome 3

  - by elomage

  I would like to open one or more Nautilus windows from the command line or a script at certain positions on my screen/desktop while in Gnome3. I could do this in Ubuntu 11.10 by specifying the geometry. For example, to open the window at the bottom right corner from the command line I could use: nautilus --geometry 600x475-0-0 ~/mystuff But using Gnome3 the geometry option is ignored, or overriden. Is there a way to make this work?

  Read the article

• Internet Connectivity Indicicator on Unity

  - by Sathish

  How can I check whether my internet connection is active on Ubuntu. If I am connected to a wired or wi-fi network, the indicator applet shows that I'm connected. But there is now way to find out the internet is working or not. I have some problem in my internet connectivity and I frequently lose my connection. I found this link is useful Internet connectivity indicator applet But I don't know that where should I use this code! #!/bin/bash if ping -c 1 -W 2 google.com > /dev/null; then echo "Up" else echo "Down" fi

  Read the article

• 12.10: How to hide bind mounts in nautilus?

  - by Bazon

  Summary: How do I remove folders mounted via bind or bindfs in /etc/fstab from appearing as devices in nautilus left column, the "places" view? detailed: Hello, I mount various directories from my data partition via bind in /etc/fstab in my home directory, eg like this: #using bind: /mnt/sda5/bazon/Musik /home/Bazon/Musik none bind,user 0 0 #or using bindfs bindfs#/mnt/sda5/tobi/Downloads /home/tobi/Downloads fuse user 0 0 (Background: /dev/sda5 mounted to /mnt/sda5 is my old home partition, but I do not want to mount it as a home partition, as I always have at least 2 Linuxes on the computer ...) That works well, but since 12.10 every one of those items is listed in Nautilus in the left column under "Devices". (Where normally USB drives appear, etc.) This is a waste of space (as I have many of such mounts...) and so I would like to have these mounts hidden, just as it was before in 12.04. How can I do that? Thanks!

  Read the article

• Error while trying to dual boot Ubuntu alongside Windows 8

  - by Brian

  I recently purchased a new Toshiba Ultrabook that comes pre-installed with Windows 8. I'm trying to dual boot 12.10 with it and I have run into a problem with the installer. When I get to the page to pick the partitions I get this: No drives are listed and the only thing in that device drop down is /dev/sda. If I click Install Now or +/-/change I get an "Ubuntu has stopped working" error message. I'm trying to install off a 12.10 64-bit USB drive in UEFI mode, and I have tried it with secure boot both enabled and disabled with the same results. The hard drive set up is as follows: 500 GB main drive windows recovery (primary) EFI boot section (primary) Windows' partion (280 GB I believe) (primary) unallocated space I created for Ubuntu partition (200ish GB) another Windows recovery partition (primary) 12 GB solid state drive all unallocated space Could it be a problem with the number of primary partitions? I think I read somewhere about a max of 4.

  Read the article

• Search for duplicate prefix of file names

  - by Mia

  I have a folder contains files name as: xxx.get.txt and xxx.resp.txt xxx.get.txt, xxx.resp.txt yyy.get.txt, yyy.resp.txt zzz.get.txt, zzz.resp.txt, etc each prefix xxx should have two corresponding files, .get.txt and .resp.txt However, now I calculate the number of .get.txt and the number of .resp.txt files, they are not equal, there're ten more .get.txt. I want to find out, which .get.txt files do not have ´.resp.txt´ file Is it possible? Many thanks!

  Read the article

• Where is Sphinx located after I install it?

  - by Alex

  I have to install Sphinx on my Ubuntu 11.10 for it to work on a ruby app. I managed to install it through synaptics, however when I run my sphinx (rake ts:rebuild) I get an error message saying: Sphinx cannot be found on your system. You may need to configure the following settings in your config/sphinx.yml file: * bin_path * searchd_binary_name * indexer_binary_name I guess I just need to edit the sphinx.yml file with the right info but hey, I can't seem to find out where sphinx is. Any help?

  Read the article

• Kernel Panic Troubleshooting For Dummies

  - by iamsid

  I have made Ubuntu my primary OS since 10.04, and I have converted many of my friends and neighbors into Ubuntu users since then. I am the fix-it guy they approach when they encounter problems. The most frantic calls I get are when they encounter an "update-induced kernel panic." (Many human beings are allergic to command-line interfaces and search engines.) What are the step-by-step procedures to resolve an "update-induced kernel panic"?

  Read the article

• How can I remove duplicate icons for "launched" java programs in the launcher?

  - by Tim

  When launching java programs (like IntelliJ IDEA and Crashplan) in Natty's Unity launcher, duplicate icons are shown (see image). For IntelliJ I created the .desktop file, for Crashplan the .desktop file is supplied with the application. Is there something that can be changed in the .desktop files (or somewhere else) that can prevent this from occurring? I couldn't find a bug report for unity itself but programs like Gnome-Do/Docky have bug reports and had to make internal changes to their applications to prevent this. In this image the 1st icon is the one created from the .desktop file and the second icon is after launching it. Second icon disappears when closing the application. Custom IntelliJ .desktop file #!/usr/bin/env xdg-open [Desktop Entry] Version=1.0 Type=Application Terminal=false Icon[en_US]=/opt/idea/bin/idea128.png Name[en_US]=IntelliJ IDEA Exec=/opt/idea/bin/idea.sh Name=IntelliJ IDEA Icon=/opt/idea/bin/idea128.png StartupNotify=true Crashplan provide .desktop file [Desktop Entry] Version=1.0 Encoding=UTF-8 Name=CrashPlan Categories=; Comment=CrashPlan Desktop UI Comment[en_CA]=CrashPlan Desktop UI Exec=/usr/local/crashplan/bin/CrashPlanDesktop Icon=/usr/local/crashplan/skin/icon_app_64x64.png Hidden=false Terminal=false Type=Application GenericName[en_CA]=

  Read the article

• How to set up VirtualBox Bridged Network on Windows 7 Host?

  - by Tong Wang

  I have virtualbox running on a Windows 2008 server, with a guest running ubuntu 10.04. The ubuntu guest is given a static IP of 192.168.1.4, which also has openssh installed. The guest has bridged network setup, I can ping 192.168.1.4 from any machine in the LAN, the ubuntu guest can also access the LAN. However, when I try to PuTTY into the ubuntu machine, I always get "connection refused". Below are some setup details: ubuntu IP: 192.168.1.4 hosts.allow sshd : 192.168.1.38 hosts.deny ALL : ALL when I the following command, I can see that sshd is listening on port 22: lsof -i tcp:22 Any idea? EDIT: It turned out to be a wrong VirtualBox Bridged Network setup. I give the Ubuntu guest a static IP of 192.168.1.4 (assigned to eth0). Then in the Windows 7 host, in the Network and Sharing Center, there is a new connection named "VirtualBox Host-Only Network" after the bridge is setup, that connection is again given the same static IP of 192.168.1.4. Once I change the "VirtualBox Host-Only Network" to automatically obtain an IP address, it's getting a different IP address of 169.254.249.70(Tentative). And now I can SSH into 192.168.1.4 with no problem, even without touching hosts.allow and hosts.deny. I've also noticed that in the properties windows (see screenshot below) of the "VirtualBox Host-Only Network", the second checkbox, "VirtualBox Bridged Networking Driver" is unchecked. While the same checkbox of the physical NIC (that is bridged to) is checked. So my further question is: is this how VBox bridged networking supposed to be setup? Any rationale behind this? I'd appreciate if someone could provide some explaination on VBox bridged networking setup on Windows host and I'll accept it as an answer.

  Read the article

• Skype on Ubuntu 12.04 x64 - anyone has it installed?

  - by Zevaka

  I am wondering if there's anyone here who managed to use skype @ 12.04. It used to work (ever since i first tried Ubuntu 10.04) flawlessly, but after upgrade to 12.04 just doesn't start. If I start skype from terminal, it just says "Segmentation fault (core dumped). I tried to remove skype and installed it from different locations: Skype website (did not install at all, "package error") From official Ubuntu repository (doesn't start at all, segmentation fault) From repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" (doesn't start at all, segmentation fault) Interesting thing: even if I remove / purge skype from the system, it still shows up in Unity menu (of course doesn't start). Any help here? Thanks!

  Read the article

• How do I install the driver for my Linksys AE1200 Wireless-N USB Adapter?

  - by Lewis Graham

  I recently downloaded Ubuntu from the main website with the hopes of dual booting it with Windows. While the operating system works, it says that I need to install a driver for my graphics card. When I type in my password the installation fails. I figure it is because I need Internet access. I tried to install my WiFi USB adapter with the installation disc but Ubuntu doesn't seem to run the setup when I click the exe. What are my available solutions as I would really like to use Ubuntu from my programming and Windows for my gaming needs? The name as read on the box is: Linksys AE1200 Wireless- N USB Adapter The description reads as such: ID 13b1:0039 Linksys (a comma messed up format) ID 046d:0a0b Logitech, Inc. ClearChat Pro USB (headset)

  Read the article

• apt-get update error - binary-i386, binary-amd64 [duplicate]

  - by magamig

  This question already has an answer here: How can I fix a 404 Error when updating packages? 5 answers When I run: sudo apt-get update It shows me the following error: W: Failed to fetch http://ppa.launchpad.net/directhex/ppa/ubuntu/dists/trusty/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/directhex/ppa/ubuntu/dists/trusty/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. I have googled for solutions, but none of what I found, have worked for me. Please give me your suggestions

  Read the article

• Wireless Lan driver for Toshiba Satellite C850-A823 PSKCCV-02300XAR

  - by user111942

  I have Toshiba Satellite C850-A823 PSKCCV-02300XAR Laptop, i had installed Ubuntu 12.10 as dual boot (windows 7 already working), after the installation i had noticed that wireless driver not installed in ubuntu 12.10, from windows device manager i got details of wireless lan driver as follows "Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC" i dont have LAN cable connection, kindly help me how to get wireless driver and install in ubuntu 12.10 hoping for your kind support shiyas

  Read the article

< Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >