Search Results

Search found 21942 results on 878 pages for 'internet friend'.

Page 441/878 | < Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >

• Why Should I Avoid Inline Scripting?

  - by thesunneversets

  A knowledgeable friend recently looked at a website I helped launch, and commented something like "very cool site, shame about the inline scripting in the source code". I'm definitely in a position to remove the inline scripting where it occurs; I'm vaguely aware that it's "a bad thing". My question is: what are the real problems with inline scripting? Is there a significant performance issue, or is it mostly just a matter of good style? Can I justify immediate action on the inline scripting front to my superiors, when there are other things to work on that might have a more obvious impact on the site? If you pulled up to a website, and took a peek at the source code, what factors would lead you to say "hmm, professional work here", and what would cause you to recoil from an obviously amateurish job? Okay, that question turned into multiple questions in the writing. But basically, inline scripting - what's the deal?

  Read the article

• Avoiding "double" subscriptions

  - by john smith

  I am working on a website that requires a bit of marketing; let me explain. This website is offering a single, say, iTunes 50$ voucher to a lucky winner. To be entered in the draw, you need to invite (and has to join) at least one friend to the website. Pretty straightforward. Now, of course it would be easy for anyone to just create a fake account and invite that account so, I was thinking of some other way to somehow find out of possible cheating. I was thinking of an IP check on the newly subscribed (invited) user, and if there is the same IP logged in the last 24 hours, and if that's the case, investigate more about it. But I was thinking that maybe there is a more clever way around this issue. Has anyone ever though about this? What other solutions did you try? Thanks in advance.

  Read the article

• Emulate Historical Figures i.e. Einstein - Is this possible using linguistic logic for my http://www.ustimeline.com Education System

  - by Johnnylight

  After hearing about the success of IBM's Watson I started thinking perhaps emulating human language is now possible? My goal is to create Virtual Historical characters to represent the main characters in my Adventur-Cation The Great American Adventure program such as Einstein or Crazy Horse. The goal is to build an intelligent system capable of indexing the internet and storing the data using a schema using modern knowledge on linguistic theory (phonemes, morphemes, syntax) to build a system capable to returning a semantically sound response very similar to the response made by the same person if still alive today. The goal would be to use the same engine/system for all characters. Each characters would have their own digital representation and voice, and would organize data differently based on tags/keywords stored about the individual. Imagine a Max Headroom Einstein. Based on the success of Watson, I believe something like this may now be possible. Would be an interesting way to study history and would be a vehicle of entertainment as well. Can anyone confirm if this has already been attempted? Is anyone interested in exploring this using Cognitive Science, Psychology, Artificial Intelligence, Historical data captured on the internet, and Linguistic theory?

  Read the article

• cannot access my own computer through My Network Places

  - by WebMAOhist

  My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

  Read the article

• How do you make a real low profile exit from your current job?

  - by Fanatic23

  This came up recently when a friend of mine left her current job. She really wanted to make a very low profile exit, but the news leaked and there really was too much noise -- some bad, some downright embarrassing not to mention management foul mouthing her. All of this, despite her contribution to the team being very substantial. So here's my question: How do you make a real low profile exit from a company? Is something like that even a reality given that a fair number of people will know you in office, not to mention your linkedin and facebook.

  Read the article

• Wifi randomly drops on Windows 8 laptop

  - by JosiahS

  First of all, I did a lot of research on this problem, and I wasn't able to come to any helpful conclusion. I've finally decided that I need advice from those who might know where to look. So don't let me down. :P I used to have an older Windows 7 laptop, which worked great for basic office and web browsing. However, I wanted something that would play actual modern games. So I recently bought a Sager NP8235 with the Intel Wireless-AC 7260 wifi card, and installed Windows 8 Pro on it. And ever since, I've been having problems with the wifi. Generally, what happens is if I leave the laptop on but inactive for an extended amount of time (I've estimated it around an hour to two), the wifi will start dropping randomly. If I happened to have a download going at the time, it usually causes the download to fail. Or, if I put the laptop to sleep overnight, the next morning I usually have to restart the computer because the wifi device apparently stops working (it literally won't turn on). Also, and most frustrating, whenever I'm on a video chat (like Skype), after about ten minutes, the connection will start lagging like crazy, until it forces Skype to end the call. After that, I usually have to disable and reenable the wifi to get it working again. I know it isn't our internet, because all the other computers in our house (~8) don't have any issues. Even the old Windows 7 laptop (connected also over wifi) works just fine, scoring the normal ~3Mbps average on speedtest.net (yes, I know our internet is slow, we live out in the country). Additionally, when I connect the Sager directly to the router via ethernet, the internet instantly starts working just great. Like I said, I've done a lot of googling to figure out what's going on, and I haven't been able to find anything that worked for me. Is it Windows 8 conflicting with the Wifi drivers? As of this writing, I have the Intel drivers v16.1.5.2 installed (without the extra Intel software). Or is it our router? It's a TP-Link TL-WR841ND, set to the default settings. The Sager is currently being assigned to a static IP, if that makes any difference. And yet, the old windows 7 laptop has a much more stable connection than the Sager. Anyone have any ideas? At this point, I'd appreciate even knowing what the problem is.

  Read the article

• NAT for static private addresses

  - by biggdman

  Could someone please help me out with the following scenario: I have a machine that hosts 3 lxc containers, and acts like a router for them. The LXC containers have private ip addresses set on the interfaces that are connected to the host. I want to provide Internet access to the containers and I want to configure the host system so it translates only the addresses that are configured static on the lxc containers interfaces. Should I try to configure the host so it translates each of the 3 private addresses to the public address of the host's interface that is connected to the Internet?

  Read the article

• Unable to connect with PPTP (From Windows 8 to Ubuntu 12.10)

  - by jaja

  I'm trying to connect using PPTP to my VPS. At first, I got the problem that my connection (Wlan, which is what I use to connect to the Internet) goes "limited" (I can't connect to the Internet) when I connect to the VPN. Then, I used to get some long message, something like you might be trying using L2TP. Then now it's back again to the "limited" problem. What's the solution to that problem? One thing I'm not sure of is what I put as my local IP address in "sudo nano /etc/pptpd.conf" Is it 127.0.0.1? I'm following this tutorial: http://thesinclairs.gotdns.com/blog/set-up-a-pptp-vpn-on-ubuntu-server/

  Read the article

• china and gmail attachs -

  - by doug

  "We have evidence to suggest that a primary goal of the attackers was accessing the Gmail accounts of Chinese human rights activists. Based on our investigation to date we believe their attack did not achieve that objective. Only two Gmail accounts appear to have been accessed, and that activity was limited to account information (such as the date the account was created) and subject line, rather than the content of emails themselves.” [source] I don't know much about how internet works, but as long the chines gov has access to the chines internet providers servers, why do they need to hack gmail accounts? I assume that i don't understand how submitting/writing a message(from user to gmail servers) works, in order to be sent later to the other email address. Who can tell me how submitting a message to a web form works?

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• Virtualhosts - best way of dealing with it?

  - by axqe56

  I'm competent at the basics of Apache, PHP and virtual hosting but have a question about virtual hosting. As far as I'm aware, HOSTS files can only be in one of the following locations: C:/Windows/system32/drivers/etc (varies in older installs, I believe) I don't think it can be put elsewhere for use with Apache, simply for virtual hosts, and the main HOSTS file for blocking sites etc. I heard about PAC files on Uniform Server's website (http://wiki.uniformserver.com/index.php/Virtual_Hosting:_PAC) but they're browser-specific though, aren't they? What's the best way to deal with virtualhosts, other than HOSTS file? My server isn't currently open to the internet yet, but if it is, what's the best way to resolve DNS for my virtualhost domains if it were to become forward-facing (i.e open to the internet)?

  Read the article

• How would I know if my OS is compromised?

  - by itsols

  I had opened a php folder from a friend's web host. I run it on mine to fix some bugs. Then I tried attaching the code to be emailed and GMAIL stated that the attachment was infected by a virus. Now I'm afraid if my Apache or OS (12.04) is infected. I checked the php files and found a base64 encoded set of code being 'eval'd at the top of each and every php file. Just reversing it (echo with htmlspecialchars) showed some clue that there were sockets in use and something to do with permissions. And also there were two websites referred having .ru extensions. Now I'm afraid if my Ubuntu system is affected or compromised. Any advice please! Here's my second run of rkhunter with the options: sudo rkhunter --check --rwo Warning: The command '/usr/bin/unhide.rb' has been replaced by a script: /usr/bin/unhide.rb: Ruby script, ASCII text Warning: Hidden directory found: /dev/.udev Warning: Hidden file found: /dev/.initramfs: symbolic link to `/run/initramfs'

  Read the article

• Is this iptables NAT exploitable from the external side?

  - by Karma Fusebox

  Could you please have a short look on this simple iptables/NAT-Setup, I believe it has a fairly serious security issue (due to being too simple). On this network there is one internet-connected machine (running Debian Squeeze/2.6.32-5 with iptables 1.4.8) acting as NAT/Gateway for the handful of clients in 192.168/24. The machine has two NICs: eth0: internet-faced eth1: LAN-faced, 192.168.0.1, the default GW for 192.168/24 Routing table is two-NICs-default without manual changes: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 (externalNet) 0.0.0.0 255.255.252.0 U 0 0 0 eth0 0.0.0.0 (externalGW) 0.0.0.0 UG 0 0 0 eth0 The NAT is then enabled only and merely by these actions, there are no more iptables rules: echo 1 > /proc/sys/net/ipv4/ip_forward /sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # (all iptables policies are ACCEPT) This does the job, but I miss several things here which I believe could be a security issue: there is no restriction about allowed source interfaces or source networks at all there is no firewalling part such as: (set policies to DROP) /sbin/iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT /sbin/iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT And thus, the questions of my sleepless nights are: Is this NAT-service available to anyone in the world who sets this machine as his default gateway? I'd say yes it is, because there is nothing indicating that an incoming external connection (via eth0) should be handled any different than an incoming internal connection (via eth1) as long as the output-interface is eth0 - and routing-wise that holds true for both external und internal clients that want to access the internet. So if I am right, anyone could use this machine as open proxy by having his packets NATted here. So please tell me if that's right or why it is not. As a "hotfix" I have added a "-s 192.168.0.0/24" option to the NAT-starting command. I would like to know if not using this option was indeed a security issue or just irrelevant thanks to some mechanism I am not aware of. As the policies are all ACCEPT, there is currently no restriction on forwarding eth1 to eth0 (internal to external). But what are the effective implications of currently NOT having the restriction that only RELATED and ESTABLISHED states are forwarded from eth0 to eth1 (external to internal)? In other words, should I rather change the policies to DROP and apply the two "firewalling" rules I mentioned above or is the lack of them not affecting security? Thanks for clarification!

  Read the article

• Can I (reasonably) refuse to sign an NDA for pro bono work? [closed]

  - by kojiro

  A friend of mine (let's call him Joe) is working on a promising project, and has asked me for help. As a matter of friendship I agreed (orally) not to discuss the details, but now he has a potential investor who wants me to sign a non-disclosure agreement (NDA). Since thus far all my work has been pro bono I told Joe I am not comfortable putting myself under documented legal obligation without some kind of compensation for the risk. (It needn't be strictly financial. I would accept a small ownership stake or possibly even just guaranteed credits in the code and documentation.) Is my request reasonable, or am I just introducing unnecessary complexity?

  Read the article

• Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

  - by Bjørnar Kibsgaard

  I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

  Read the article

• Verizon Fivespot firewall

  - by Patrick

  I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

• Facebook Like Button on Individual Pages

  - by clifgray

  There have been a few questions like this asked before but not in the same way. I want to put a Facebook Like or Share or Recommend button on all of my website pages. The site is somewhat like Yelp but for different topics. I am wondering which button to put there. Does it do any good to have individual pages "liked" and does it show anywhere besides on that page? I basically just want people to be able to click a button and have the page show up on their wall and their friend's feeds and I am not sure what the best plugin for that is.

  Read the article

• Setting up a linux switch

  - by Shahmir Javaid

  I have a C++ Program to sniff each and every packet that crosses my linux box. However i need to now get my linux box to listen to every traffic in my network. I could buy a managed switch and set up port spanning, but i aint paying 200+ £'s for a switch and plus gives me a chance to learn. My Network +---------Computer A | Internet-----Router------Switch-------------+---------Linux Box | +---------Computer B Proposed Network +---------Computer A | Internet-----Router------Linux Box--------Switch eth0^ ^eth1 | +---------Computer B How would i setup this in linux. Do i just configure both the ethernet on different IP Address on the same network. Or am i completelly on the wrong track My System Fedora 13. Thanks

  Read the article

• WDS (Wireless Distribution System) not work

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• Why can't I connect to a wifi network with my laptop, when I can with my phone?

  - by Alex Sf.

  I can connect with my phone and use the browser as usual. On my laptop it won't connect when using windows 7 while in ubuntu it will connect, but with no internet. What is going on here and how can I get internet on my laptop ? [edit] It's a public wifi hotspot. I can connect with no issues at home. My network asapter is: Atheros AR5B97. And my phone is an iPhone 3G. The wizard's of no help since it asks me to check the router, which I can't since it's a public hostspot.

  Read the article

• Disable Thunderbird "failed to connect" notifications

  - by The Electric Muffin

  My network manager doesn't start until I log in, so for the first ten seconds or so after I login I have no Internet connection. The problem is that I have Thunderbird set to automatically start on login, so it helpfully tells me it "failed to connect" every time I log in. Also, my Internet connection isn't too reliable, so I sometimes get those messages even when I'm supposedly connected. Is there any way to disable these notifications, while still allowing the ones about new mail? Computer info: Thunderbird 15.0 $ uname -a Linux [HOSTNAME REDACTED] 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Probably irrelevant: NetworkManager Version 0.9.0.1 (nm09 20120407) KDE Platform Version 4.8.4 (4.8.4)

  Read the article

• How to setup a wired local area network in Windows 7?

  - by user883434

  I am using a Lenovo ThinkPad X200 and want to se tup a wired local area network. How could I achieve this? Actually, my question is very simple. I just want to connect to the internet and I have a cable connection at home. So, I just want to plug the cable line to my notebook (x200) so that I can access the internet via the cable. But I dont know how to setup a local area connection in notebook. Since it automatically appear in my desktop, but not in my notebook. Thanks!

  Read the article

• Ubuntu, connecting to WLAN

  - by Holly

  Hello, I successfully installed Ubuntu onto my usb hard drive. However, I'm not sure what the issue is with my internet. I'm not familiar enough with ubuntu to know whether this is a problem with recognizing my wireless card or with my internet, etc. So I suppose my question is, how do I tell whether it's recognizing my wireless card? (Network manager isn't showing any wireless signals, though I wasn't sure if it was supposed to. ) And, if it's not working, how do I go about troubleshooting that issue? Thanks!

  Read the article

• Ubuntu 12.04 and Realtek Wireless Card Incompatible

  - by Tim

  Quick background: I installed Linux Ubuntu 12.04 on a Dell Inspiron 3520 after uninstalling Windows 8. A friend suggested to do this as opposed to buying a laptop with Linux pre-installed. Everything except the wireless card works. When I load up the laptop, I see a wireless animation as if it's trying to locate the wireless connection (for a while, then it goes blank), but no connections appear under the wireless option (under "Edit Connections" then "Wireless"). What I've tried: - Doing ndiswrapper. Failed. - Installing a few kernels for realtek. Failed.

  Read the article

< Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >