html help workshop - Page 442

Reading XML element & child nodes using LINQ in Vb.net- help me in where condition :(

- by New Linq Baby

Hi, I am new in LINQ world. I need an urgent help in reading the xml elements using LINQ with specific where condition. I need to find the max air_temp for a county i.e where county name = "Boone" and hour id = "06/03/2009 09:00CDT" i tried something like below, but no luck : Dim custs As IEnumerable = From c In Element.Load("C:\meridian.xml").Elements("county") _ Select c.Elements("hour").Elements("air_temp").Max() For Each x In custs Response.Write(custs(0).ToString()) Next ------------------- here is the xml file : <forecasts> <issued>06/02/2009 12:00CDT</issued> - <county name="Adair"> - <hour id="06/02/2009 12:00CDT"> <air_temp>61</air_temp> <cloud_cover>overcast</cloud_cover> <dew_point>59</dew_point> <precip_prob>90</precip_prob> <precip_rate>0.12</precip_rate> <precip_type>rain</precip_type> <snow_rate>0.0</snow_rate> <wind_direction>NE</wind_direction> <wind_speed>12</wind_speed> <dew_point_confidence>-3/+3</dew_point_confidence> <road_temp>64</road_temp> <road_frost_prob>0</road_frost_prob> <road_potential_evap_rate>429</road_potential_evap_rate> <road_temp_confidence>-3/+2</road_temp_confidence> <dew_point_confidence>-3/+3</dew_point_confidence> <bridge_temp>63</bridge_temp> <bridge_temp_confidence>-4/+2</bridge_temp_confidence> <bridge_frost>NO</bridge_frost> </hour> - <hour id="06/02/2009 13:00CDT"> <air_temp>61</air_temp> <cloud_cover>overcast</cloud_cover> <dew_point>60</dew_point> <precip_prob>70</precip_prob> <precip_rate>0.01</precip_rate> <precip_type>rain</precip_type> <snow_rate>0.0</snow_rate> <wind_direction>ENE</wind_direction> <wind_speed>10</wind_speed> <dew_point_confidence>-3/+3</dew_point_confidence> <road_temp>65</road_temp> <road_frost_prob>0</road_frost_prob> <road_potential_evap_rate>411</road_potential_evap_rate> <road_temp_confidence>-3/+2</road_temp_confidence> <dew_point_confidence>-3/+3</dew_point_confidence> <bridge_temp>64</bridge_temp> <bridge_temp_confidence>-4/+1</bridge_temp_confidence> <bridge_frost>NO</bridge_frost> </hour>

Read the article

Apache MINA NIO connector help

- by satya

I'm new to using MINA. I've a program which uses MINA NIOconnector to connect to host. I'm able to send data and also receive. This is clear from log4j log which i'm attaching below. E:\>java TC4HostClient [12:21:46] NioProcessor-1 INFO [] [] [org.apache.mina.filter.logging.LoggingFil ter] - CREATED [12:21:46] NioProcessor-1 INFO [] [] [org.apache.mina.filter.logging.LoggingFil ter] - OPENED Opened CGS Sign On [12:21:46] NioProcessor-1 INFO [] [] [org.apache.mina.filter.logging.LoggingFil ter] - SENT: HeapBuffer[pos=0 lim=370 cap=512: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20...] [12:21:46] NioProcessor-1 INFO [] [] [org.apache.mina.filter.logging.LoggingFil ter] - SENT: HeapBuffer[pos=0 lim=0 cap=0: empty] Message Sent 00000333CST 1001010 00000308000003080010000 000009600000000FTS O00000146TC4DS 001WSJTC41 ---001NTMU9001-I --- -----000 0030000000012400000096500007013082015SATYA 500000 010165070000002200011 01800000000022000001241 172.16.25.122 02 [12:21:46] NioProcessor-1 INFO [] [] [org.apache.mina.filter.logging.LoggingFil ter] - RECEIVED: HeapBuffer[pos=0 lim=36 cap=2048: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20...] [12:21:46] NioProcessor-1 INFO [] [] [org.apache.mina.filter.logging.LoggingFil ter] - RECEIVED: HeapBuffer[pos=0 lim=505 cap=2048: 31 20 20 20 20 20 20 20 20 3 0 30 30 30 30 34 38...] After Writing [12:21:52] NioProcessor-1 INFO [] [] [org.apache.mina.filter.logging.LoggingFil ter] - CLOSED Though i see "RECEIVED" in log my handler messageReceived method is not being called. Can anyone please help me in this regard and tell me what i'm doing wrong import java.io.IOException; import java.net.InetSocketAddress; import java.nio.charset.Charset; import java.net.SocketAddress; import org.apache.mina.core.service.IoAcceptor; import org.apache.mina.core.session.IdleStatus; import org.apache.mina.filter.codec.ProtocolCodecFilter; import org.apache.mina.filter.codec.textline.TextLineCodecFactory; import org.apache.mina.filter.logging.LoggingFilter; import org.apache.mina.transport.socket.nio.NioSocketConnector; import org.apache.mina.core.session.IoSession; import org.apache.mina.core.future.*; public class TC4HostClient { private static final int PORT = 9123; public static void main( String[] args ) throws IOException,Exception { NioSocketConnector connector = new NioSocketConnector(); SocketAddress address = new InetSocketAddress("172.16.25.3", 8004); connector.getSessionConfig().setReadBufferSize( 2048 ); connector.getFilterChain().addLast( "logger", new LoggingFilter() ); connector.getFilterChain().addLast( "codec", new ProtocolCodecFilter( new TextLineCodecFactory( Charset.forName( "UTF-8" )))); connector.setHandler(new TC4HostClientHandler()); ConnectFuture future1 = connector.connect(address); future1.awaitUninterruptibly(); if (!future1.isConnected()) { return ; } IoSession session = future1.getSession(); System.out.println("CGS Sign On"); session.getConfig().setUseReadOperation(true); session.write(" 00000333CST 1001010 00000308000003080010000000009600000000FTS O00000146TC4DS 001WSJTC41 ---001NTMU9001-I --------000 0030000000012400000096500007013082015SATYA 500000 010165070000002200011 01800000000022000001241 172.16.25.122 02"); session.getCloseFuture().awaitUninterruptibly(); System.out.println("After Writing"); connector.dispose(); } } import org.apache.mina.core.session.IdleStatus; import org.apache.mina.core.service.IoHandlerAdapter; import org.apache.mina.core.session.IoSession; import org.apache.mina.core.buffer.IoBuffer; public class TC4HostClientHandler extends IoHandlerAdapter { @Override public void exceptionCaught( IoSession session, Throwable cause ) throws Exception { cause.printStackTrace(); } @Override public void messageSent( IoSession session, Object message ) throws Exception { String str = message.toString(); System.out.println("Message Sent" + str); } @Override public void messageReceived( IoSession session, Object message ) throws Exception { IoBuffer buf = (IoBuffer) message; // Print out read buffer content. while (buf.hasRemaining()) { System.out.print((char) buf.get()); } System.out.flush(); } /* @Override public void messageReceived( IoSession session, Object message ) throws Exception { String str = message.toString(); System.out.println("Message Received : " + str); }*/ @Override public void sessionIdle( IoSession session, IdleStatus status ) throws Exception { System.out.println( "IDLE " + session.getIdleCount( status )); } public void sessionClosed(IoSession session){ System.out.println( "Closed "); } public void sessionOpened(IoSession session){ System.out.println( "Opened "); } }

Read the article

Help:Graph contest problem: maybe a modified Dijkstra or another alternative algorithm

- by newba

Hi you all, I'm trying to do this contest exercise about graphs: XPTO is an intrepid adventurer (a little too temerarious for his own good) who boasts about exploring every corner of the universe, no matter how inhospitable. In fact, he doesn't visit the planets where people can easily live in, he prefers those where only a madman would go with a very good reason (several millions of credits for instance). His latest exploit is trying to survive in Proxima III. The problem is that Proxima III suffers from storms of highly corrosive acids that destroy everything, including spacesuits that were especially designed to withstand corrosion. Our intrepid explorer was caught in a rectangular area in the middle of one of these storms. Fortunately, he has an instrument that is capable of measuring the exact concentration of acid on each sector and how much damage it does to his spacesuit. Now, he only needs to find out if he can escape the storm. Problem The problem consists of finding an escape route that will allow XPTOto escape the noxious storm. You are given the initial energy of the spacesuit, the size of the rectangular area and the damage that the spacesuit will suffer while standing in each sector. Your task is to find the exit sector, the number of steps necessary to reach it and the amount of energy his suit will have when he leaves the rectangular area. The escape route chosen should be the safest one (i.e., the one where his spacesuit will be the least damaged). Notice that Rodericus will perish if the energy of his suit reaches zero. In case there are more than one possible solutions, choose the one that uses the least number of steps. If there are at least two sectors with the same number of steps (X1, Y1) and (X2, Y2) then choose the first if X1 < X2 or if X1 = X2 and Y1 < Y2. Constraints 0 < E = 30000 the suit's starting energy 0 = W = 500 the rectangle's width 0 = H = 500 rectangle's height 0 < X < W the starting X position 0 < Y < H the starting Y position 0 = D = 10000 the damage sustained in each sector Input The first number given is the number of test cases. Each case will consist of a line with the integers E, X and Y. The following line will have the integers W and H. The following lines will hold the matrix containing the damage D the spacesuit will suffer whilst in the corresponding sector. Notice that, as is often the case for computer geeks, (1,1) corresponds to the upper left corner. Output If there is a solution, the output will be the remaining energy, the exit sector's X and Y coordinates and the number of steps of the route that will lead Rodericus to safety. In case there is no solution, the phrase Goodbye cruel world! will be written. Sample Input 3 40 3 3 7 8 12 11 12 11 3 12 12 12 11 11 12 2 1 13 11 11 12 2 13 2 14 10 11 13 3 2 1 12 10 11 13 13 11 12 13 12 12 11 13 11 13 12 13 12 12 11 11 11 11 13 13 10 10 13 11 12 8 3 4 7 6 4 3 3 2 2 3 2 2 5 2 2 2 3 3 2 1 2 2 3 2 2 4 3 3 2 2 4 1 3 1 4 3 2 3 1 2 2 3 3 0 3 4 10 3 4 7 6 3 3 1 2 2 1 0 2 2 2 4 2 2 5 2 2 1 3 0 2 2 2 2 1 3 3 4 2 3 4 4 3 1 1 3 1 2 2 4 2 2 1 Sample Output 12 5 1 8 Goodbye cruel world! 5 1 4 2 Basically, I think we have to do a modified Dijkstra, in which the distance between nodes is the suit's energy (and we have to subtract it instead of suming up like is normal with distances) and the steps are the ....steps made along the path. The pos with the bester binomial (Energy,num_Steps) is our "way out". Important : XPTO obviously can't move in diagonals, so we have to cut out this cases. I have many ideas, but I have such a problem implementing them... Could someone please help me thinking about this with some code or, at least, ideas? Am I totally wrong?

Read the article

Help with malloc and free: Glibc detected: free(): invalid pointer

- by nunos

I need help with debugging this piece of code. I know the problem is in malloc and free but can't find exactly where, why and how to fix it. Please don't answer: "Use gdb" and that's it. I would use gdb to debug it, but I still don't know much about it and am still learning it, and would like to have, in the meanwhile, another solution. Thanks. #include <stdio.h> #include <stdlib.h> #include <ctype.h> #include <unistd.h> #include <string.h> #include <sys/wait.h> #include <sys/types.h> #define MAX_COMMAND_LENGTH 256 #define MAX_ARGS_NUMBER 128 #define MAX_HISTORY_NUMBER 100 #define PROMPT ">>> " int num_elems; typedef enum {false, true} bool; typedef struct { char **arg; char *infile; char *outfile; int background; } Command_Info; int parse_cmd(char *cmd_line, Command_Info *cmd_info) { char *arg; char *args[MAX_ARGS_NUMBER]; int i = 0; arg = strtok(cmd_line, " "); while (arg != NULL) { args[i] = arg; arg = strtok(NULL, " "); i++; } num_elems = i;precisa em free_mem if (num_elems == 0) return 0; cmd_info->arg = (char **) ( malloc(num_elems * sizeof(char *)) ); cmd_info->infile = NULL; cmd_info->outfile = NULL; cmd_info->background = 0; bool b_infile = false; bool b_outfile = false; int iarg = 0; for (i = 0; i < num_elems; i++) { if ( !strcmp(args[i], "<") ) { if ( b_infile || i == num_elems-1 || !strcmp(args[i+1], "<") || !strcmp(args[i+1], ">") || !strcmp(args[i+1], "&") ) return -1; i++; cmd_info->infile = malloc(strlen(args[i]) * sizeof(char)); strcpy(cmd_info->infile, args[i]); b_infile = true; } else if (!strcmp(args[i], ">")) { if ( b_outfile || i == num_elems-1 || !strcmp(args[i+1], ">") || !strcmp(args[i+1], "<") || !strcmp(args[i+1], "&") ) return -1; i++; cmd_info->outfile = malloc(strlen(args[i]) * sizeof(char)); strcpy(cmd_info->outfile, args[i]); b_outfile = true; } else if (!strcmp(args[i], "&")) { if ( i == 0 || i != num_elems-1 || cmd_info->background ) return -1; cmd_info->background = true; } else { cmd_info->arg[iarg] = malloc(strlen(args[i]) * sizeof(char)); strcpy(cmd_info->arg[iarg], args[i]); iarg++; } } cmd_info->arg[iarg] = NULL; return 0; } void print_cmd(Command_Info *cmd_info) { int i; for (i = 0; cmd_info->arg[i] != NULL; i++) printf("arg[%d]=\"%s\"\n", i, cmd_info->arg[i]); printf("arg[%d]=\"%s\"\n", i, cmd_info->arg[i]); printf("infile=\"%s\"\n", cmd_info->infile); printf("outfile=\"%s\"\n", cmd_info->outfile); printf("background=\"%d\"\n", cmd_info->background); } void get_cmd(char* str) { fgets(str, MAX_COMMAND_LENGTH, stdin); str[strlen(str)-1] = '\0'; } pid_t exec_simple(Command_Info *cmd_info) { pid_t pid = fork(); if (pid < 0) { perror("Fork Error"); return -1; } if (pid == 0) { if ( (execvp(cmd_info->arg[0], cmd_info->arg)) == -1) { perror(cmd_info->arg[0]); exit(1); } } return pid; } void type_prompt(void) { printf("%s", PROMPT); } void syntax_error(void) { printf("msh syntax error\n"); } void free_mem(Command_Info *cmd_info) { int i; for (i = 0; cmd_info->arg[i] != NULL; i++) free(cmd_info->arg[i]); free(cmd_info->arg); free(cmd_info->infile); free(cmd_info->outfile); } int main(int argc, char* argv[]) { char cmd_line[MAX_COMMAND_LENGTH]; Command_Info cmd_info; //char* history[MAX_HISTORY_NUMBER]; while (true) { type_prompt(); get_cmd(cmd_line); if ( parse_cmd(cmd_line, &cmd_info) == -1) { syntax_error(); continue; } if (!strcmp(cmd_line, "")) continue; if (!strcmp(cmd_info.arg[0], "exit")) exit(0); pid_t pid = exec_simple(&cmd_info); waitpid(pid, NULL, 0); free_mem(&cmd_info); } return 0; }

Read the article

JSF 2.0: java based custom component + html table + facelets = data model not updated

- by mikic

Hi, I'm having problems getting the data model of a HtmlDataTable to be correctly updated by JSF 2.0 and Facelets. I have created a custom Java-based component that extends HtmlDataTable and dynamically adds columns in the encodeBegin method. @Override public void encodeBegin(FacesContext context) throws IOException { if (this.findComponent("c0") == null) { for (int i = 0; i < 3; i++) { HtmlColumn myNewCol = new HtmlColumn(); myNewCol.setId("c" + i); HtmlInputText myNewText = new HtmlInputText(); myNewText.setId("t" + i); myNewText.setValue("#{row[" + i + "]}"); myNewCol.getChildren().add(myNewText); this.getChildren().add(myNewCol); } } super.encodeBegin(context); } My test page contains the following <h:form id="fromtb"> <test:MatrixTest id="tb" var="row" value="#{MyManagedBean.model}"> </test:MatrixTest> <h:commandButton id="btn" value="Set" action="#{MyManagedBean.mergeInput}"/> </h:form> <h:outputText id="mergedInput" value="#{MyManagedBean.mergedInput}"/> My managed bean class contains the following @ManagedBean(name="MyManagedBean") @SessionScoped public class MyManagedBean { private List model = null; private String mergedInput = null; public MyManagedBean() { model = new ArrayList(); List myFirst = new ArrayList(); myFirst.add(""); myFirst.add(""); myFirst.add(""); model.add(myFirst); List mySecond = new ArrayList(); mySecond.add(""); mySecond.add(""); mySecond.add(""); model.add(mySecond); } public String mergeInput() { StringBuffer myMergedInput = new StringBuffer(); for (Object object : model) { myMergedInput.append(object); } setMergedInput(myMergedInput.toString()); return null; } public List getModel() { return model; } public void setModel(List model) { this.model = model; } public String getMergedInput() { return mergedInput; } public void setMergedInput(String mergedInput) { this.mergedInput = mergedInput; } When invoked, the page is correctly rendered with a table made of 3 columns (added at runtime) and 2 rows (as my data model has 2 rows). However when the user enter some data in the input fields and then click the submit button, the model is not correctly updated and therefore the mergeInput() method creates a sequence of empty strings which is rendered on the same page. I have added some logging to the decode() method of my custom component and I can see that the parameters entered by the user are being posted back with the request, however these parameters are not used to update the data model. If I update the encodeBegin() method of my custom component as follow @Override public void encodeBegin(FacesContext context) throws IOException { super.encodeBegin(context); } and I update the test page as follow <test:MatrixTest id="tb" var="row" value="#{MyManagedBean.model}"> <h:column id="c0"><h:inputText id="t0" value="#{row[0]}"/></h:column> <h:column id="c1"><h:inputText id="t1" value="#{row[1]}"/></h:column> <h:column id="c2"><h:inputText id="t2" value="#{row[2]}"/></h:column> </test:MatrixTest> the page is correctly rendered and this time when the user enters data and submits the form, the underlying data model is correctly updated and the mergeInput() method creates a sequence of strings with the user data. Why does the test case with columns declared in the facelet page works correctly (ie the data model is correctly updated by JSF) where the same does not happen when the columns are created at runtime using the encodeBegin() method? Is there any method I need to invoke or interface I need to extend in order to ensure the data model is correctly updated? I am using this test case to address the issue that is appearing in a much more complex component, therefore I can't achieve the same functionality using a facelet composite component. Please note that this has been done using NetBeans 6.8, JRE 1.6.0u18, GlassFish 3.0. Thanks for your help.

Read the article

[python] voice communication for python help!

- by Eric

Hello! I'm currently trying to write a voicechat program in python. All tips/trick is welcome to do this. So far I found pyAudio to be a wrapper of PortAudio. So I played around with that and got an input stream from my microphone to be played back to my speakers. Only RAW of course. But I can't send RAW-data over the netowrk (due the size duh), so I'm looking for a way to encode it. And I searched around the 'net and stumbled over this speex-wrapper for python. It seems to good to be true, and believe me, it was. You see in pyAudio you can set the size of the chunks you want to take from your input audiobuffer, and in that sample code on the link, it's set to 320. Then when it's encoded, its like ~40 bytes of data per chunk, which is fairly acceptable I guess. And now for the problem. I start a sample program which just takes the input stream, encodes the chunks, decodes them and play them (not sending over the network due testing). If I just let my computer idle and run this program it works great, but as soon as I do something, i.e start Firefox or something, the audio input buffer gets all clogged up! It just grows and then it all crashes and gives me an overflow error on the buffer.. OK, so why am I just taking 320 bytes of the stream? I could just take like 1024 bytes or something and that will easy the pressure on the buffer. BUT. If I give speex 1024 bytes of data to encode/decode, it either crashes and says that thats too big for its buffer. OR it encodes/decodes it, but the sound is very noisy and "choppy" as if it only encoded a tiny bit of that 1024 chunk and the rest is static noise. So the sound sounds like a helicopter, lol. I did some research and it seems that speex only can convert 320 bytes of data at time, and well, 640 for wide-band. But that's the standard? How can I fix this problem? How should I construct my program to work with speex? I could use a middle-buffer tho that takes all available data to read from the buffer, then chunk this up in 320 bits and encode/decode them. But this takes a bit longer time and seems like a very bad solution of the problem.. Because as far as I know, there's no other encoder for python that encodes the audio so it can be sent over the network in acceptable small packages, or? I've been googling for three days now. Also there is this pyMedia library, I don't know if its good to convert to mp3/ogg for this kind of software. Thank in in advance for reading this, hope anyone can help me! (:

Read the article

Help with InvalidCastException

- by Robert

I have a gridview and, when a record is double-clicked, I want it to open up a new detail-view form for that particular record. As an example, I have created a Customer class: using System; using System.Data; using System.Configuration; using System.Collections.Generic; using System.ComponentModel; using System.Data.SqlClient; using System.Collections; namespace SyncTest { #region Customer Collection public class CustomerCollection : BindingListView<Customer> { public CustomerCollection() : base() { } public CustomerCollection(List<Customer> customers) : base(customers) { } public CustomerCollection(DataTable dt) { foreach (DataRow oRow in dt.Rows) { Customer c = new Customer(oRow); this.Add(c); } } } #endregion public class Customer : INotifyPropertyChanged, IEditableObject, IDataErrorInfo { private string _CustomerID; private string _CompanyName; private string _ContactName; private string _ContactTitle; private string _OldCustomerID; private string _OldCompanyName; private string _OldContactName; private string _OldContactTitle; private bool _Editing; private string _Error = string.Empty; private EntityStateEnum _EntityState; private Hashtable _PropErrors = new Hashtable(); public event PropertyChangedEventHandler PropertyChanged; private void FirePropertyChangeNotification(string propName) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(propName)); } } public Customer() { this.EntityState = EntityStateEnum.Unchanged; } public Customer(DataRow dr) { //Populates the business object item from a data row this.CustomerID = dr["CustomerID"].ToString(); this.CompanyName = dr["CompanyName"].ToString(); this.ContactName = dr["ContactName"].ToString(); this.ContactTitle = dr["ContactTitle"].ToString(); this.EntityState = EntityStateEnum.Unchanged; } public string CustomerID { get { return _CustomerID; } set { _CustomerID = value; FirePropertyChangeNotification("CustomerID"); } } public string CompanyName { get { return _CompanyName; } set { _CompanyName = value; FirePropertyChangeNotification("CompanyName"); } } public string ContactName { get { return _ContactName; } set { _ContactName = value; FirePropertyChangeNotification("ContactName"); } } public string ContactTitle { get { return _ContactTitle; } set { _ContactTitle = value; FirePropertyChangeNotification("ContactTitle"); } } public Boolean IsDirty { get { return ((this.EntityState != EntityStateEnum.Unchanged) || (this.EntityState != EntityStateEnum.Deleted)); } } public enum EntityStateEnum { Unchanged, Added, Deleted, Modified } void IEditableObject.BeginEdit() { if (!_Editing) { _OldCustomerID = _CustomerID; _OldCompanyName = _CompanyName; _OldContactName = _ContactName; _OldContactTitle = _ContactTitle; } this.EntityState = EntityStateEnum.Modified; _Editing = true; } void IEditableObject.CancelEdit() { if (_Editing) { _CustomerID = _OldCustomerID; _CompanyName = _OldCompanyName; _ContactName = _OldContactName; _ContactTitle = _OldContactTitle; } this.EntityState = EntityStateEnum.Unchanged; _Editing = false; } void IEditableObject.EndEdit() { _Editing = false; } public EntityStateEnum EntityState { get { return _EntityState; } set { _EntityState = value; } } string IDataErrorInfo.Error { get { return _Error; } } string IDataErrorInfo.this[string columnName] { get { return (string)_PropErrors[columnName]; } } private void DataStateChanged(EntityStateEnum dataState, string propertyName) { //Raise the event if (PropertyChanged != null && propertyName != null) { PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } //If the state is deleted, mark it as deleted if (dataState == EntityStateEnum.Deleted) { this.EntityState = dataState; } if (this.EntityState == EntityStateEnum.Unchanged) { this.EntityState = dataState; } } } } Here is my the code for the double-click event: private void customersDataGridView_CellDoubleClick(object sender, DataGridViewCellEventArgs e) { Customer oCustomer = (Customer)customersBindingSource.CurrencyManager.List[customersBindingSource.CurrencyManager.Position]; CustomerForm oForm = new CustomerForm(); oForm.NewCustomer = oCustomer; oForm.ShowDialog(this); oForm.Dispose(); oForm = null; } Unfortunately, when this code runs, I receive an InvalidCastException error stating "Unable to cast object to type 'System.Data.DataRowView' to type 'SyncTest.Customer'". This error occurs on the very first line of that event: Customer oCustomer = (Customer)customersBindingSource.CurrencyManager.List[customersBindingSource.CurrencyManager.Position]; What am I doing wrong?... and what can I do to fix this? Any help is greatly appreciated. Thanks!

Read the article

More outlook VSTO help...

- by Jerry

I posted an article here (http://stackoverflow.com/questions/1095195/how-do-i-set-permissions-on-my-vsto-outlook-add-in) and I was able to build my installer. I thought that once the installer built itself, everything would work fine. I was wrong. It works on about half of the PC's I've run the installer on. My problem is that the other half doesn't work. I'm trying to install an add-in to Outlook Office 2003. I've even gone so far as to create the steps manually by using a batch file. Nothing seems to work on these PCs and I can't find a common denominator that I can rule out or in that will make the VSTO Addin work. Here is the batch file I am using. What am I doing/not-doing wrong with this? I could really use a VSTO expert's help. Thanks!!!! EDIT I've changed the batch file and registry settings to reflect recent updates to them. I've also attached the error text that comes from the PCs that don't work. @echo off echo Installing Visual Studio for Office Runtime (SE 2005)... ..\VSTO\vstor.exe echo Creating Directories... mkdir "c:\program files\Project Archiver" echo Installying Add-In... echo Copying files... xcopy /Y *.dll "c:\program files\Project Archiver" xcopy /Y *.manifest "c:\program files\Project Archiver" echo Setting Security... "C:\Windows\Microsoft.NET\Framework\v2.0.50727\caspol.exe" -polchgprompt off "C:\Windows\Microsoft.NET\Framework\v2.0.50727\caspol.exe" -u -ag All_Code -url "c:\program files\Project Archiver\ProjectArchiver.dll" FullTrust -n "Project Archiver" -d "Outlook plugin for archiving" "C:\Windows\Microsoft.NET\Framework\v2.0.50727\caspol.exe" -u -ag All_Code -url "c:\program files\Project Archiver\Microsoft.Office.Interop.SmartTags.dll" FullTrust -n "Project Archiver" -d "Outlook plugin for archiving" "C:\Windows\Microsoft.NET\Framework\v2.0.50727\caspol.exe" -polchgprompt on echo Loading Registry Values... "c:\program files\Project Archiver\VSTO_settings.reg" echo "That should do it." pause I took the Registry settings (mentioned in the batch file above) straight from a PC that this application worked on. The VSTO Registry settings I am using are : Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\ProjectArchiver\CLSID] @="{27830B8D-F7A1-4945-AC4A-47661B9ED36D}" [HKEY_CLASSES_ROOT\CLSID\{27830B8D-F7A1-4945-AC4A-47661B9ED36D}] @="ProjectArchiver -- an addin created with VSTO technology" [HKEY_CLASSES_ROOT\CLSID\{27830B8D-F7A1-4945-AC4A-47661B9ED36D}\InprocServer32] @=hex(2):25,00,43,00,6f,00,6d,00,6d,00,6f,00,6e,00,50,00,72,00,6f,00,67,00,72,\ 00,61,00,6d,00,46,00,69,00,6c,00,65,00,73,00,25,00,5c,00,4d,00,69,00,63,00,\ 72,00,6f,00,73,00,6f,00,66,00,74,00,20,00,53,00,68,00,61,00,72,00,65,00,64,\ 00,5c,00,56,00,53,00,54,00,4f,00,5c,00,38,00,2e,00,30,00,5c,00,41,00,64,00,\ 64,00,69,00,6e,00,4c,00,6f,00,61,00,64,00,65,00,72,00,2e,00,64,00,6c,00,6c,\ 00,00,00 "ManifestName"="ProjectArchiver.dll.manifest" "ThreadingModel"="Both" "ManifestLocation"="C:\\Program Files\\Project Archiver\\" [HKEY_CLASSES_ROOT\CLSID\{27830B8D-F7A1-4945-AC4A-47661B9ED36D}\ProgID] @="ProjectArchiver" [HKEY_CLASSES_ROOT\CLSID\{27830B8D-F7A1-4945-AC4A-47661B9ED36D}\Programmable] [HKEY_CLASSES_ROOT\CLSID\{27830B8D-F7A1-4945-AC4A-47661B9ED36D}\VersionIndependentProgID] @="ProjectArchiver" [HKEY_CLASSES_ROOT\ProjectArchiver] @="" [HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{27830B8D-F7A1-4945-AC4A-47661B9ED36D}] @="ProjectArchiver -- an addin created with VSTO technology" [HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{27830B8D-F7A1-4945-AC4A-47661B9ED36D}\InprocServer32] @=hex(2):25,00,43,00,6f,00,6d,00,6d,00,6f,00,6e,00,50,00,72,00,6f,00,67,00,72,\ 00,61,00,6d,00,46,00,69,00,6c,00,65,00,73,00,25,00,5c,00,4d,00,69,00,

Read the article

curl multipart/form-data help

- by user253530

Hi am trying to post some data on a website using CURL. The posting process has 3 steps. 1. enter a URL, submit and get to the 2nd step with some fields already completed 2. submit again, after you entered some more data and preview the form. 3. submit the final data. The problem is that after the second step, the form data looks like this POSTDATA =-----------------------------12249266671528 Content-Disposition: form-data; name="title" Filme 2010, filme 2009, filme noi, programe TV, program cinema, premiere cinema, trailere filme - CineMagia.ro -----------------------------12249266671528 Content-Disposition: form-data; name="category" 3 -----------------------------12249266671528 Content-Disposition: form-data; name="tags" filme, programe tv, program cinema -----------------------------12249266671528 Content-Disposition: form-data; name="bodytext" Filme 2010, filme 2009, filme noi, programe TV, program cinema, premiere cinema, trailere filme -----------------------------12249266671528 Content-Disposition: form-data; name="trackback" -----------------------------12249266671528 Content-Disposition: form-data; name="url" http://cinemagia.ro -----------------------------12249266671528 Content-Disposition: form-data; name="phase" 2 -----------------------------12249266671528 Content-Disposition: form-data; name="randkey" 9510520 -----------------------------12249266671528 Content-Disposition: form-data; name="id" 17753 -----------------------------12249266671528-- I am stuck trying to devise an algorithm that will generate this kind of POST data for the second step. Just to mention the URL of the form never changes. It is always: http://www.xxx.com/submit. There is only a hidden input called "phase" that changes according to the step i am currently on (phase = 1, phase = 2, phase = 3). Any help, be it either code, pseudo-code or just guidance would be greatly appreciated. My code so far: function postBlvsocialbookmarkingcom($curl,$vars) { extract($vars); $baseUrl = "http://www.blv-socialbookmarking.com/"; //step 1: login $curl->setRedirect(); $page = $curl->post ($baseUrl.'login.php?return=/index.php', array ('username' => $username, 'password' => $password, 'processlogin' => '1', 'return' => '/index.php')); if ($err = $curl->getError ()) { return $err; } //post step 1---- //get random key $page = $curl->post($baseUrl.'/submit', array()); $randomKey = explode('<input type="hidden" name="randkey" value="',$page); $randKey = explode('"',$randomKey[1]); //------------------------------------- $page = $curl->post($baseUrl.'/submit', array('url'=>$address,'phase'=>'1','randkey'=>$randKey[0],'id'=>'c_1')); if ($err = $curl->getError ()) { return $err; } //echo $page; // //post step 2 $page = $curl->post ($baseUrl.'/submit', array ('title' => $title, 'category'=>'1', 'tags' => $tags, 'bodytext' => $description, 'phase' => '2')); if ($err = $curl->getError ()) { return $err; } echo $page; //post step 3 $page = $curl->post ($baseUrl.'/submit', array ('phase' => '3')); if ($err = $curl->getError ()) { return $err; } echo $page; }

Read the article

Runtime error of TASM language help!

- by dominoos

.model small .stack 400h .data message db "hello. ", 0ah, 0dh, "$" firstdigit db ? seconddigit db ? thirddigit db ? number dw ? newnumber db ? anumber dw 0d bnumber dw 0d Firstn db 0ah, 0dh, "Enter first 3 digit number: ","$" secondn db 0ah, 0dh, "Enter second 3 digit number: ","$" messageB db 0ah, 0dh, "HCF of two number is: ","$" linebreaker db 0ah, 0dh, ' ', 0ah, 0dh, '$' .code Start: mov ax, @data ; establish access to the data segment mov ds, ax ; mov number, 0d mov dx, offset message ; print the string "yob choi 0648293" mov ah, 9h int 21h num: mov dx, offset Firstn ; print the string "put 1st 3 digit" mov ah, 9h int 21h ;run JMP FirstFirst ; jump to FirstFirst FirstFirst: ;first digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov firstdigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, doubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 100d ;This is so we can calculate 100*1st digit +10*2nd digit + 3rd digit mul cx ;start to accumulate the 3 digit number in the variable imul cx ;it is understood that the other operand is ax ; the result will use both dx::ax ;dx will contain only leading zeros add anumber, ax ;save ;Second Digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov seconddigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, boubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 10d ;continue to accumulate the 3 digit number in the variable mul cx ;it is understood that the other operand is ax, containing first digit ;the result will use both dx::ax ;dx will contain only leading zeros. add anumber, ax ;save ;third Digit mov ah, 1d ;samething as above int 21h ; mov thirddigit, al ; sub al, 30h ; cbw ; add anumber, ax ; jmp num2 ;go to checks Num2: mov dx, offset secondn ; print the string "put 2nd 3 digits" mov ah, 9h int 21h ;run JMP SecondSecond SecondSecond: ;first digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov firstdigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, doubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 100d ;This is so we can calculate 100*1st digit +10*2nd digit + 3rd digit mul cx ;start to accumulate the 3 digit number in the variable imul cx ;it is understood that the other operand is ax ; the result will use both dx::ax ;dx will contain only leading zeros add bnumber, ax ;save ;Second Digit mov ah, 1d ;bios code for read a keystroke int 21h ;call bios, it is understood that the ascii code will be returned in al mov seconddigit, al ;may as well save a copy sub al, 30h ;Convert code to an actual integer cbw ;CONVERT BYTE TO WORD. This takes whatever number is in al and ;extends it to ax, boubling its size from 8 bits to 16 bits ;The first digit now occupies all of ax as an integer mov cx, 10d ;continue to accumulate the 3 digit number in the variable mul cx ;it is understood that the other operand is ax, containing first digit ;the result will use both dx::ax ;dx will contain only leading zeros. add bnumber, ax ;save ;third Digit mov ah, 1d ;samething as above int 21h ; mov thirddigit, al ; sub al, 30h ; cbw ; add bnumber, ax ; jmp compare ;go to compare compare: CMP ax, anumber ;comparing numbB and Number JA comp1 ;go to comp1 if anumber is bigger CMP ax, anumber ; JB comp2 ;go to comp2 if anumber is smaller CMP ax, anumber ; JE equal ;go to equal if two numbers are the same JMP compare ;go to compare (avioding error) comp1: SUB ax, anumber; subtract smaller number from bigger number JMP compare ; comp2: SUB anumber, ax; subtract smaller number from bigger number JMP compare ; equal: mov ah, 9d ;make linkbreak after the 2nd 3 digit number mov dx, offset linebreaker int 21h mov ah, 9d ;print "HCF of two number is:" mov dx, offset messageB int 21h mov ax,anumber ;copying 2nd number into ax add al,30h ; converting to ascii mov newnumber,al ; copying from low part of register into newnumb mov ah, 2d ;bios code for print a character mov dl, newnumber ;we had saved the ascii code here int 21h ;call to bios JMP exit; exit: mov ah, 4ch int 21h ;exit the program End hi, this is a program that finds highest common factor of 2 different 3digit number. if i put 200, 235,312 (low numbers) it works fine. but if i put 500, 550, 654(bigger number) the program crashes after the 2nd 3digit number is entered. can you help me to find out what problem is?

Read the article

Mysql - Help me change this single complex query to use temporary tables

- by sandeepan-nath

About the system: - There are tutors who create classes and packs - A tags based search approach is being followed.Tag relations are created when new tutors register and when tutors create packs (this makes tutors and packs searcheable). For details please check the section How tags work in this system? below. Following is the concerned query Can anybody help me suggest an approach using temporary tables. We have indexed all the relevant fields and it looks like this is the least time possible with this approach:- SELECT SUM(DISTINCT( t.tag LIKE "%Dictatorship%" OR tt.tag LIKE "%Dictatorship%" OR ttt.tag LIKE "%Dictatorship%" )) AS key_1_total_matches , SUM(DISTINCT( t.tag LIKE "%democracy%" OR tt.tag LIKE "%democracy%" OR ttt.tag LIKE "%democracy%" )) AS key_2_total_matches , COUNT(DISTINCT( od.id_od )) AS tutor_popularity, CASE WHEN ( IF(( wc.id_wc > 0 ), ( wc.wc_api_status = 1 AND wc.wc_type = 0 AND wc.class_date > '2010-06-01 22:00:56' AND wccp.status = 1 AND ( wccp.country_code = 'IE' OR wccp.country_code IN ( 'INT' ) ) ), 0) ) THEN 1 ELSE 0 END AS 'classes_published' , CASE WHEN ( IF(( lp.id_lp > 0 ), ( lp.id_status = 1 AND lp.published = 1 AND lpcp.status = 1 AND ( lpcp.country_code = 'IE' OR lpcp.country_code IN ( 'INT' ) ) ), 0) ) THEN 1 ELSE 0 END AS 'packs_published', td . *, u . * FROM tutor_details AS td JOIN users AS u ON u.id_user = td.id_user LEFT JOIN learning_packs_tag_relations AS lptagrels ON td.id_tutor = lptagrels.id_tutor LEFT JOIN learning_packs AS lp ON lptagrels.id_lp = lp.id_lp LEFT JOIN learning_packs_categories AS lpc ON lpc.id_lp_cat = lp.id_lp_cat LEFT JOIN learning_packs_categories AS lpcp ON lpcp.id_lp_cat = lpc.id_parent LEFT JOIN learning_pack_content AS lpct ON ( lp.id_lp = lpct.id_lp ) LEFT JOIN webclasses_tag_relations AS wtagrels ON td.id_tutor = wtagrels.id_tutor LEFT JOIN webclasses AS wc ON wtagrels.id_wc = wc.id_wc LEFT JOIN learning_packs_categories AS wcc ON wcc.id_lp_cat = wc.id_wp_cat LEFT JOIN learning_packs_categories AS wccp ON wccp.id_lp_cat = wcc.id_parent LEFT JOIN order_details AS od ON td.id_tutor = od.id_author LEFT JOIN orders AS o ON od.id_order = o.id_order LEFT JOIN tutors_tag_relations AS ttagrels ON td.id_tutor = ttagrels.id_tutor LEFT JOIN tags AS t ON t.id_tag = ttagrels.id_tag LEFT JOIN tags AS tt ON tt.id_tag = lptagrels.id_tag LEFT JOIN tags AS ttt ON ttt.id_tag = wtagrels.id_tag WHERE ( u.country = 'IE' OR u.country IN ( 'INT' ) ) AND CASE WHEN ( ( tt.id_tag = lptagrels.id_tag ) AND ( lp.id_lp > 0 ) ) THEN lp.id_status = 1 AND lp.published = 1 AND lpcp.status = 1 AND ( lpcp.country_code = 'IE' OR lpcp.country_code IN ( 'INT' ) ) ELSE 1 END AND CASE WHEN ( ( ttt.id_tag = wtagrels.id_tag ) AND ( wc.id_wc > 0 ) ) THEN wc.wc_api_status = 1 AND wc.wc_type = 0 AND wc.class_date > '2010-06-01 22:00:56' AND wccp.status = 1 AND ( wccp.country_code = 'IE' OR wccp.country_code IN ( 'INT' ) ) ELSE 1 END AND CASE WHEN ( od.id_od > 0 ) THEN od.id_author = td.id_tutor AND o.order_status = 'paid' AND CASE WHEN ( od.id_wc > 0 ) THEN od.can_attend_class = 1 ELSE 1 END ELSE 1 END AND ( t.tag LIKE "%Dictatorship%" OR t.tag LIKE "%democracy%" OR tt.tag LIKE "%Dictatorship%" OR tt.tag LIKE "%democracy%" OR ttt.tag LIKE "%Dictatorship%" OR ttt.tag LIKE "%democracy%" ) GROUP BY td.id_tutor HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 ORDER BY tutor_popularity DESC, u.surname ASC, u.name ASC LIMIT 0, 20 The problem The results returned by the above query are correct (AND logic working as per expectation), but the time taken by the query rises alarmingly for heavier data and for the current data I have it is like 10 seconds as against normal query timings of the order of 0.005 - 0.0002 seconds, which makes it totally unusable. Somebody suggested in my previous question to do the following:- create a temporary table and insert here all relevant data that might end up in the final result set run several updates on this table, joining the required tables one at a time instead of all of them at the same time finally perform a query on this temporary table to extract the end result All this was done in a stored procedure, the end result has passed unit tests, and is blazing fast. I have never worked with temporary tables till now. Only if I could get some hints, kind of schematic representations so that I can start with... Is there something faulty with the query? What can be the reason behind 10+ seconds of execution time? How tags work in this system? When a tutor registers, tags are entered and tag relations are created with respect to tutor's details like name, surname etc. When a Tutors create packs, again tags are entered and tag relations are created with respect to pack's details like pack name, description etc. tag relations for tutors stored in tutors_tag_relations and those for packs stored in learning_packs_tag_relations. All individual tags are stored in tags table. The explain query output:- Please see this screenshot - http://www.test.examvillage.com/Explain_query_improved.jpg

Read the article

Help to solve "Robbery Problem"

- by peiska

Hello, Can anybody help me with this problem in C or Java? The problem is taken from here: http://acm.pku.edu.cn/JudgeOnline/problem?id=1104 Inspector Robstop is very angry. Last night, a bank has been robbed and the robber has not been caught. And this happened already for the third time this year, even though he did everything in his power to stop the robber: as quickly as possible, all roads leading out of the city were blocked, making it impossible for the robber to escape. Then, the inspector asked all the people in the city to watch out for the robber, but the only messages he got were of the form "We don't see him." But this time, he has had enough! Inspector Robstop decides to analyze how the robber could have escaped. To do that, he asks you to write a program which takes all the information the inspector could get about the robber in order to find out where the robber has been at which time. Coincidentally, the city in which the bank was robbed has a rectangular shape. The roads leaving the city are blocked for a certain period of time t, and during that time, several observations of the form "The robber isn't in the rectangle Ri at time ti" are reported. Assuming that the robber can move at most one unit per time step, your program must try to find the exact position of the robber at each time step. Input The input contains the description of several robberies. The first line of each description consists of three numbers W, H, t (1 <= W,H,t <= 100) where W is the width, H the height of the city and t is the time during which the city is locked. The next contains a single integer n (0 <= n <= 100), the number of messages the inspector received. The next n lines (one for each of the messages) consist of five integers ti, Li, Ti, Ri, Bi each. The integer ti is the time at which the observation has been made (1 <= ti <= t), and Li, Ti, Ri, Bi are the left, top, right and bottom respectively of the (rectangular) area which has been observed. (1 <= Li <= Ri <= W, 1 <= Ti <= Bi <= H; the point (1, 1) is the upper left hand corner, and (W, H) is the lower right hand corner of the city.) The messages mean that the robber was not in the given rectangle at time ti. The input is terminated by a test case starting with W = H = t = 0. This case should not be processed. Output For each robbery, first output the line "Robbery #k:", where k is the number of the robbery. Then, there are three possibilities: If it is impossible that the robber is still in the city considering the messages, output the line "The robber has escaped." In all other cases, assume that the robber really is in the city. Output one line of the form "Time step : The robber has been at x,y." for each time step, in which the exact location can be deduced. (x and y are the column resp. row of the robber in time step .) Output these lines ordered by time . If nothing can be deduced, output the line "Nothing known." and hope that the inspector will not get even more angry. Output a blank line after each processed case.

Read the article

Android Dev Help: Saving an image from Res/raw or Asset folder to the Sd card

- by Lucy

Android Development Query Hello, I wonder if anyone could help me, i am trying to save an image (jpg or png) from the res/raw or assets folder to the SD card location (/sdcard/DCIM/). I have been following a tutorial which can save an image from a URL to the SD card Root, but i have looked everywhere to be able to save from res/raw or asset folder instead, and to a differnet location onthe sd card /sdcard/DCIM/ Here is the code, can anyone show me how to do the above from this? Thanks Lucy public class home extends Activity { private File file; private String imgNumber; private Button btnDownload; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); btnDownload=(Button)findViewById(R.id.btnDownload); btnDownload.setOnClickListener(new OnClickListener() { public void onClick(View v) { btnDownload.setText("Download is in Progress."); String savedFilePath=Download("http://www.domain.com/android1.png"); Toast.makeText(getApplicationContext(), "File is Saved in "+savedFilePath, 1000).show(); if(savedFilePath!=null) { btnDownload.setText("Download Completed."); } } }); } public String Download(String Url) { String filepath=null; try { //set the download URL, a url that points to a file on the internet //this is the file to be downloaded URL url = new URL(Url); //create the new connection HttpURLConnection urlConnection = (HttpURLConnection) url.openConnection(); //set up some things on the connection urlConnection.setRequestMethod("GET"); urlConnection.setDoOutput(true); //and connect! urlConnection.connect(); //set the path where we want to save the file //in this case, going to save it on the root directory of the //sd card. File SDCardRoot = Environment.getExternalStorageDirectory(); //create a new file, specifying the path, and the filename //which we want to save the file as. String filename= "download_"+System.currentTimeMillis()+".png"; // you can download to any type of file ex:.jpeg (image) ,.txt(text file),.mp3 (audio file) Log.i("Local filename:",""+filename); file = new File(SDCardRoot,filename); if(file.createNewFile()) { file.createNewFile(); } //this will be used to write the downloaded data into the file we created FileOutputStream fileOutput = new FileOutputStream(file); //this will be used in reading the data from the internet InputStream inputStream = urlConnection.getInputStream(); //this is the total size of the file int totalSize = urlConnection.getContentLength(); //variable to store total downloaded bytes int downloadedSize = 0; //create a buffer... byte[] buffer = new byte[1024]; int bufferLength = 0; //used to store a temporary size of the buffer //now, read through the input buffer and write the contents to the file while ( (bufferLength = inputStream.read(buffer)) > 0 ) { //add the data in the buffer to the file in the file output stream (the file on the sd card fileOutput.write(buffer, 0, bufferLength); //add up the size so we know how much is downloaded downloadedSize += bufferLength; //this is where you would do something to report the prgress, like this maybe Log.i("Progress:","downloadedSize:"+downloadedSize+"totalSize:"+ totalSize) ; btnDownload.setText("download Status:"+downloadedSize+" / "+totalSize); } //close the output stream when done fileOutput.close(); if(downloadedSize==totalSize) filepath=file.getPath(); //catch some possible errors... } catch (MalformedURLException e) { e.printStackTrace(); } catch (IOException e) { filepath=null; btnDownload.setText("Internet Connection Failed.\n"+e.getMessage()); e.printStackTrace(); } Log.i("filepath:"," "+filepath) ; return filepath; } }

Read the article

C# need help debugging socks5-connection attemp

- by Chuck

Hi, I've written the following code to (successfully) connect to a socks5 proxy. I send a user/pw auth and get an OK reply (0x00), but as soon as I tell the proxy to connect to whichever ip:port, it gives me 0x01 (general error). Socket socket5_proxy = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); IPEndPoint proxyEndPoint = new IPEndPoint(IPAddress.Parse("111.111.111.111"), 1080); // proxy ip, port. fake for posting purposes. socket5_proxy.Connect(proxyEndPoint); byte[] init_socks_command = new byte[4]; init_socks_command[0] = 0x05; init_socks_command[1] = 0x02; init_socks_command[2] = 0x00; init_socks_command[3] = 0x02; socket5_proxy.Send(init_socks_command); byte[] socket_response = new byte[2]; int bytes_recieved = socket5_proxy.Receive(socket_response, 2, SocketFlags.None); if (socket_response[1] == 0x02) { byte[] temp_bytes; string socks5_user = "foo"; string socks5_pass = "bar"; byte[] auth_socks_command = new byte[3 + socks5_user.Length + socks5_pass.Length]; auth_socks_command[0] = 0x05; auth_socks_command[1] = Convert.ToByte(socks5_user.Length); temp_bytes = Encoding.Default.GetBytes(socks5_user); temp_bytes.CopyTo(auth_socks_command, 2); auth_socks_command[2 + socks5_user.Length] = Convert.ToByte(socks5_pass.Length); temp_bytes = Encoding.Default.GetBytes(socks5_pass); temp_bytes.CopyTo(auth_socks_command, 3 + socks5_user.Length); socket5_proxy.Send(auth_socks_command); socket5_proxy.Receive(socket_response, 2, SocketFlags.None); if (socket_response[1] != 0x00) return; byte[] connect_socks_command = new byte[10]; connect_socks_command[0] = 0x05; connect_socks_command[1] = 0x02; // streaming connect_socks_command[2] = 0x00; connect_socks_command[3] = 0x01; // ipv4 temp_bytes = IPAddress.Parse("222.222.222.222").GetAddressBytes(); // target connection. fake ip, obviously temp_bytes.CopyTo(connect_socks_command, 4); byte[] portBytes = BitConverter.GetBytes(8888); connect_socks_command[8] = portBytes[0]; connect_socks_command[9] = portBytes[1]; socket5_proxy.Send(connect_socks_command); socket5_proxy.Receive(socket_response); if (socket_response[1] != 0x00) MessageBox.Show("Damn it"); // I always end here, 0x01 I've used this as a reference: http://en.wikipedia.org/wiki/SOCKS#SOCKS_5 Have I completely misunderstood something here? How I see it, I can connect to the socks5 fine. I can authenticate fine. But I/the proxy can't "do" anything? Yes, I know the proxy works. Yes, the target ip is available and yes the target port is open/responsive. I get 0x01 no matter what I try to connect to. Any help is VERY MUCH appreciated! Thanks, Chuck

Read the article

help me understand try and catch

- by user295189

I have this try and catch problem. I am trying to redirect to a different page. But sometimes it does and some times it doesnt. I think the problem is in try and catch . can someone help me understand this. Thanks var pg = new Object(); var da = document.all; var wo = window.opener; pg.changeHideReasonID = function(){ if(pg.hideReasonID.value == 0 && pg.hideReasonID.selectedIndex > 0){ pg.otherReason.style.backgroundColor = "ffffff"; pg.otherReason.disabled = 0; pg.otherReason.focus(); } else { pg.otherReason.style.backgroundColor = "f5f5f5"; pg.otherReason.disabled = 1; } } pg.exit = function(pid){ try { if(window.opener.hideRecordReload){ window.opener.hideRecordReload(pg.recordID, pg.recordTypeID); } else { window.opener.pg.hideRecord(pg.recordID, pg.recordTypeID); } } catch(e) {} try { window.opener.pg.hideEncounter(pg.recordID); } catch(e) {} try { window.opener.pg.hideRecordResponse(pg.hideReasonID.value == 0 ? pg.otherReason.value : pg.hideReasonID.options[pg.hideReasonID.selectedIndex].text); } catch(e) {} try { window.opener.pg.hideRecord_Response(pg.recordID, pg.recordTypeID); } catch(e) {} try { window.opener.pg.hideRecord_Response(pg.recordID, pg.recordTypeID); } catch(e) {} try { window.opener.window.parent.frames[1].pg.loadQualityMeasureRequest(); } catch(e) {} try { window.opener.pg.closeWindow(); } catch(e) {} parent.loadCenter2({reportName:'redirectedpage',patientID:pid}); parent.$.fancybox.close(); } pg.hideRecord = function(){ var pid = this.pid; pg.otherReason.value = pg.otherReason.value.trim(); if(pg.hideReasonID.selectedIndex == 0){ alert("You have not indicated your reason for hiding this record."); pg.hideReasonID.focus(); } else if(pg.hideReasonID.value == 0 && pg.hideReasonID.selectedIndex > 0 && pg.otherReason.value.length < 2){ alert("You have indicated that you wish to enter a reason\nnot on the list, but you have not entered a reason."); pg.otherReason.focus(); } else { pg.workin(1); var n = new Object(); n.noheaders = 1; n.recordID = pg.recordID; n.recordType = pg.recordType; n.recordTypeID = pg.recordTypeID; n.encounterID = request.encounterID; n.hideReasonID = pg.hideReasonID.value; n.hideReason = pg.hideReasonID.value == 0 ? pg.otherReason.value : pg.hideReasonID.options[pg.hideReasonID.selectedIndex].text; Connect.Ajax.Post("/emr/hideRecord/act_hideRecord.php", n, pg.exit(pid)); } } pg.init = function(){ pg.blocker = da.blocker; pg.hourglass = da.hourglass; pg.content = da.pageContent; pg.recordType = da.recordType.value; pg.recordID = parseInt(da.recordID.value); pg.recordTypeID = parseInt(da.recordTypeID.value); pg.information = da.information; pg.hideReasonID = da.hideReasonID; pg.hideReasonID.onchange = pg.changeHideReasonID; pg.hideReasonID.tabIndex = 1; pg.otherReason = da.otherReason; pg.otherReason.tabIndex = 2; pg.otherReason.onblur = function(){ this.value = this.value.trim(); } pg.otherReason.onfocus = function(){ this.select(); } pg.btnCancel = da.btnCancel; pg.btnCancel.tabIndex = 4; pg.btnCancel.title = "Close this window"; pg.btnCancel.onclick = function(){ //window.close(); parent.$.fancybox.close(); } pg.btnHide = da.btnHide; pg.btnHide.tabIndex = 3; pg.btnHide.onclick = pg.hideRecord; pg.btnHide.title = "Hide " + pg.recordType.toLowerCase() + " record"; document.body.onselectstart = function(){ if(event.srcElement.tagName.search(/INPUT|TEXT/i)){ return false; } } pg.workin(0); } pg.workin = function(){ var n = arguments.length ? arguments[0] : 1; pg.content.disabled = pg.hideReasonID.disabled = n; pg.blocker.style.display = pg.hourglass.style.display = n ? "block" : "none"; if(n){ pg.otherReason.disabled = 1; pg.otherReason.style.backgroundColor = "f5f5f5"; } else { pg.otherReason.disabled = !(pg.hideReasonID.value == 0 && pg.hideReasonID.selectedIndex > 0); pg.otherReason.style.backgroundColor = pg.otherReason.disabled ? "f5f5f5" : "ffffff"; pg.hideReasonID.focus(); } }

Read the article

XML to CSV using XSLT help.

- by Adam Kahtava

I'd like to convert XML into CSV using an XSLT, but when applying the XSL from the SO thread titled XML To CSV XSLT against my input: <WhoisRecord> <DomainName>127.0.0.1</DomainName> <RegistryData> <AbuseContact> <Email>[email protected]</Email> <Name>Internet Corporation for Assigned Names and Number</Name> <Phone>+1-310-301-5820</Phone> </AbuseContact> <AdministrativeContact i:nil="true"/> <BillingContact i:nil="true"/> <CreatedDate/> <RawText>...</RawText> <Registrant> <Address>4676 Admiralty Way, Suite 330</Address> <City>Marina del Rey</City> <Country>US</Country> <Name>Internet Assigned Numbers Authority</Name> <PostalCode>90292-6695</PostalCode> <StateProv>CA</StateProv> </Registrant> <TechnicalContact> <Email>[email protected]</Email> <Name>Internet Corporation for Assigned Names and Number</Name> <Phone>+1-310-301-5820</Phone> </TechnicalContact> <UpdatedDate>2010-04-14</UpdatedDate> <ZoneContact i:nil="true"/> </RegistryData> </WhoisRecord> I end up with: [email protected] Corporation for Assigned Names and Number+1-310-301-5820, , , , ..., 4676 Admiralty Way, Suite 330Marina del ReyUSInternet Assigned Numbers Authority90292-6695CA, [email protected] Corporation for Assigned Names and Number+1-310-301-5820, 2010-04-14, My problem is that, the resulting transformation is missing nodes (like the DomainName element containing the IP address) and some child nodes are concatenated without commas (like the children of AbuseContact). I'd like to see all the XML output in CVS form, and strings like: "[email protected] Corporation for Assigned Names and Number+1-310-301-5820," delimited by commas. My XSL is pretty rusty. Your help is appreciated. :) Here's the XSL I'm using: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="text" encoding="iso-8859-1"/> <xsl:strip-space elements="*" /> <xsl:template match="/*/child::*"> <xsl:for-each select="child::*"> <xsl:if test="position() != last()"><xsl:value-of select="normalize-space(.)"/>, </xsl:if> <xsl:if test="position() = last()"><xsl:value-of select="normalize-space(.)"/><xsl:text> </xsl:text> </xsl:if> </xsl:for-each> </xsl:template> </xsl:stylesheet>

Read the article

Need help debugging a PHP 5 SOAP hello world application

- by WarDoGG

I've been trying to get PHP 5 SOAP extension to work after reading every tutorial there is on the web, but to no avail. This has been very frustrating and i would really appreciate it if someone could point out where i am going wrong and why. Thanks for your help in advance, and any more details needed i'll oblige. The WSDL is as follows : <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions name="test" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s1="http://microsoft.com/wsdl/types/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"> <wsdl:types> <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/"> <s:import namespace="http://microsoft.com/wsdl/types/" /> <s:element name="getUser"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="username" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" /> </s:sequence> </s:complexType> </s:element> <s:element name="getUserResponse"> <s:complexType> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="getUserResult" type="tns:bookUser" /> </s:sequence> </s:complexType> </s:element> <s:complexType name="bookUser"> <s:sequence> <s:element minOccurs="1" maxOccurs="1" name="ID" type="s:int" /> <s:element minOccurs="1" maxOccurs="1" name="GUID" type="s1:guid" /> <s:element minOccurs="0" maxOccurs="1" name="login" type="s:string" /> <s:element minOccurs="0" maxOccurs="1" name="pass" type="s:string" /> </s:sequence> </s:complexType> </s:schema> </wsdl:types> <wsdl:message name="getUserSoapIn"> <wsdl:part name="parameters" element="tns:getUser" /> </wsdl:message> <wsdl:message name="getUserSoapOut"> <wsdl:part name="parameters" element="tns:getUserResponse" /> </wsdl:message> <wsdl:portType name="test"> <wsdl:operation name="getUser"> <wsdl:input message="tns:getUserSoapIn" /> <wsdl:output message="tns:getUserSoapOut" /> </wsdl:operation> </wsdl:portType> <wsdl:binding name="testBinding" type="tns:test"> <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" /> <wsdl:operation name="getUser"> <soap:operation soapAction="http://tempuri.org/getUser" /> <wsdl:input> <soap:body use="literal" /> </wsdl:input> <wsdl:output> <soap:body use="literal" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="testService"> <wsdl:port name="testPort" binding="tns:testBinding"> <soap:address location="http://127.0.0.1/index.php" /> </wsdl:port> </wsdl:service> </wsdl:definitions> The code for the server : <?php function getUser($param) { return array( 'bookUser'=>array ( 'ID'=>1, 'GUID'=>2, 'login'=>$param->username, 'pass'=>$param->password ) ); } ini_set("soap.wsdl_cache_enabled", "0"); // disabling WSDL cache $server = new SoapServer("http://127.0.0.1/1.wsdl"); $server->addFunction("getUser"); $server->handle(); ?> and the code for the client : $client = new SoapClient("http://127.0.0.1/index.php?wsdl", array('exceptions' => 0)); try { $arr_data = array ( array ( 'username'=>'xyz', 'password'=>'abc' ) ); print_r($client->__soapCall("getUser",$arr_data)); } catch (SoapFault $result) { print_r($result); }

Read the article

Need some help deciphering a line of assembler code, from .NET JITted code

- by Lasse V. Karlsen

In a C# constructor, that ends up with a call to this(...), the actual call gets translated to this: 0000003d call dword ptr ds:[199B88E8h] What is the DS register contents here? I know it's the data-segment, but is this call through a VMT-table or similar? I doubt it though, since this(...) wouldn't be a call to a virtual method, just another constructor. I ask because the value at that location seems to be bad in some way, if I hit F11, trace into (Visual Studio 2008), on that call-instruction, the program crashes with an access violation. The code is deep inside a 3rd party control library, where, though I have the source code, I don't have the assemblies compiled with enough debug information that I can trace it through C# code, only through the disassembler, and then I have to match that back to the actual code. The C# code in question is this: public AxisRangeData(AxisRange range) : this(range, range.Axis) { } Reflector shows me this IL code: .maxstack 8 L_0000: ldarg.0 L_0001: ldarg.1 L_0002: ldarg.1 L_0003: callvirt instance class DevExpress.XtraCharts.AxisBase DevExpress.XtraCharts.AxisRange::get_Axis() L_0008: call instance void DevExpress.XtraCharts.Native.AxisRangeData::.ctor(class DevExpress.XtraCharts.ChartElement, class DevExpress.XtraCharts.AxisBase) L_000d: ret It's that last call there, to the other constructor of the same class, that fails. The debugger never surfaces inside the other method, it just crashes. The disassembly for the method after JITting is this: 00000000 push ebp 00000001 mov ebp,esp 00000003 sub esp,14h 00000006 mov dword ptr [ebp-4],ecx 00000009 mov dword ptr [ebp-8],edx 0000000c cmp dword ptr ds:[18890E24h],0 00000013 je 0000001A 00000015 call 61843511 0000001a mov eax,dword ptr [ebp-4] 0000001d mov dword ptr [ebp-0Ch],eax 00000020 mov eax,dword ptr [ebp-8] 00000023 mov dword ptr [ebp-10h],eax 00000026 mov ecx,dword ptr [ebp-8] 00000029 cmp dword ptr [ecx],ecx 0000002b call dword ptr ds:[1889D0DCh] // range.Axis 00000031 mov dword ptr [ebp-14h],eax 00000034 push dword ptr [ebp-14h] 00000037 mov edx,dword ptr [ebp-10h] 0000003a mov ecx,dword ptr [ebp-0Ch] 0000003d call dword ptr ds:[199B88E8h] // this(range, range.Axis)? 00000043 nop 00000044 mov esp,ebp 00000046 pop ebp 00000047 ret Basically what I'm asking is this: What the purpose of the ds:[ADDR] indirection here? VMT-table is only for virtual isn't it? and this is constructor Could the constructor have yet to be JITted, which could mean that the call would actually call through a JIT shim? I'm afraid I'm in deep water here, so anything might and could help. Edit: Well, the problem just got worse, or better, or whatever. We are developing the .NET feature in a C# project in a Visual Studio 2008 solution, and debugging and developing through Visual Studio. However, in the end, this code will be loaded into a .NET runtime hosted by a Win32 Delphi application. In order to facilitate easy experimentation of such features, we can also configure the Visual Studio project/solution/debugger to copy the produced dll's to the Delphi app's directory, and then execute the Delphi app, through the Visual Studio debugger. Turns out, the problem goes away if I run the program outside of the debugger, but during debugging, it crops up, every time. Not sure that helps, but since the code isn't slated for production release for another 6 months or so, then it takes some of the pressure off of it for the test release that we have soon. I'll dive into the memory parts later, but probably not until over the weekend, and post a followup.

Read the article

Help understanding some OpenGL stuff

- by shinjuo

I am working with some code to create a triangle that moves with arrow keys. I want to create a second object that moves independently. This is where I am having trouble, I have created the second actor, but cannot get it to move. There is too much code to post it all so I will just post a little and see if anyone can help at all. ogl_test.cpp #include "platform.h" #include "srt/scheduler.h" #include "model.h" #include "controller.h" #include "model_module.h" #include "graphics_module.h" class blob : public actor { public: blob(float x, float y) : actor(math::vector2f(x, y)) { } void render() { transform(); glBegin(GL_TRIANGLES); glVertex3f(0.25f, 0.0f, -5.0f); glVertex3f(-.5f, 0.25f, -5.0f); glVertex3f(-.5f, -0.25f, -5.0f); glEnd(); end_transform(); } void update(controller& c, float dt) { if (c.left_key) { rho += pi / 9.0f * dt; c.left_key = false; } if (c.right_key) { rho -= pi / 9.0f * dt; c.right_key = false; } if (c.up_key) { v += .1f * dt; c.up_key = false; } if (c.down_key) { v -= .1f * dt; if (v < 0.0) { v = 0.0; } c.down_key = false; } actor::update(c, dt); } }; class enemyOne : public actor { public: enemyOne(float x, float y) : actor(math::vector2f(x, y)) { } void render() { transform(); glBegin(GL_TRIANGLES); glVertex3f(0.25f, 0.0f, -5.0f); glVertex3f(-.5f, 0.25f, -5.0f); glVertex3f(-.5f, -0.25f, -5.0f); glEnd(); end_transform(); } void update(controller& c, float dt) { if (c.left_key) { rho += pi / 9.0f * dt; c.left_key = false; } if (c.right_key) { rho -= pi / 9.0f * dt; c.right_key = false; } if (c.up_key) { v += .1f * dt; c.up_key = false; } if (c.down_key) { v -= .1f * dt; if (v < 0.0) { v = 0.0; } c.down_key = false; } actor::update(c, dt); } }; int APIENTRY WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, char* lpCmdLine, int nCmdShow ) { model m; controller control(m); srt::scheduler scheduler(33); srt::frame* model_frame = new srt::frame(scheduler.timer(), 0, 1, 2); srt::frame* render_frame = new srt::frame(scheduler.timer(), 1, 1, 2); model_frame->add(new model_module(m, control)); render_frame->add(new graphics_module(m)); scheduler.add(model_frame); scheduler.add(render_frame); blob* prime = new blob(0.0f, 0.0f); m.add(prime); m.set_prime(prime); enemyOne* primeTwo = new enemyOne(2.0f, 0.0f); m.add(primeTwo); m.set_prime(primeTwo); scheduler.start(); control.start(); return 0; } model.h #include <vector> #include "vec.h" const double pi = 3.14159265358979323; class controller; using math::vector2f; class actor { public: vector2f P; float theta; float v; float rho; actor(const vector2f& init_location) : P(init_location), rho(0.0), v(0.0), theta(0.0) { } virtual void render() = 0; virtual void update(controller&, float dt) { float v1 = v; float theta1 = theta + rho * dt; vector2f P1 = P + v1 * vector2f(cos(theta1), sin(theta1)); if (P1.x < -4.5f || P1.x > 4.5f) { P1.x = -P1.x; } if (P1.y < -4.5f || P1.y > 4.5f) { P1.y = -P1.y; } v = v1; theta = theta1; P = P1; } protected: void transform() { glPushMatrix(); glTranslatef(P.x, P.y, 0.0f); glRotatef(theta * 180.0f / pi, 0.0f, 0.0f, 1.0f); //Rotate about the z-axis } void end_transform() { glPopMatrix(); } }; class model { private: typedef std::vector<actor*> actor_vector; actor_vector actors; public: actor* _prime; model() { } void add(actor* a) { actors.push_back(a); } void set_prime(actor* a) { _prime = a; } void update(controller& control, float dt) { for (actor_vector::iterator i = actors.begin(); i != actors.end(); ++i) { (*i)->update(control, dt); } } void render() { for (actor_vector::iterator i = actors.begin(); i != actors.end(); ++i) { (*i)->render(); } } };

Read the article

winForms Booking Class Help

- by cameron

Hi, I am using C# Windows Forms in visual studio with different classes performing different functions in my program. I have a "Program" main class with the following information: static class Program { /// <summary> /// The main entry point for the application. /// </summary> [STAThread] static void Main() { Application.EnableVisualStyles(); Application.SetCompatibleTextRenderingDefault(false); Application.Run(new Form1()); } } and a Screen class with the following information class Screen { public List<Show> shows { get; private set; } public int ScreenNumber { get; private set; } public Screen(int screenNumber, params Show[] schedule) { this.ScreenNumber = screenNumber; this.shows = schedule.ToList<Show>(); } } and a Seat class with the following information public class Seat { private string name; public bool IsAvailable { get; set; } public decimal Price { get; private set; } public int Number { get; private set; } public Seat(bool isAvailable, int number) { this.IsAvailable = isAvailable; this.name = String.Format("Seat {0}",number); this.Price = 7.50m; this.Number = number; } public override string ToString() { return this.name; } } and finally a Show class with the following information public class Show { private List<Seat> seats = new List<Seat>(); public string Title { get; private set; } public string Time { get; private set; } public int ScreenNumber { get; private set; } public List<Seat> Seats { get { return this.seats; } } public Show(string title, DateTime time, int screenNumber, int numberOfSeats) { this.Title = title; this.Time = time.ToShortTimeString(); this.ScreenNumber = screenNumber; this.initSeats(numberOfSeats); } private void initSeats(int numberOfSeats) { for (int i = 0; i < numberOfSeats; i++) this.seats.Add(new Seat(true, i + 1)); } }` these all feed into two different winForms to create a booking system for shows. therefore i need to collate the data given in program and output it into a txt file. any help will be much appreciated NOTE: the code for FORM1 which allows the user to select which show they want is: namespace CindysSeats { public partial class Form1 : Form { private Cinema cinema = new Cinema(); //booked show could be added to booking object when you create it so that it is easily writable to the external file private Show selectedShow; public Form1() { InitializeComponent(); this.showList_dg.DataSource = this.cinema.GetShowList(); } private void showList_dg_RowHeaderMouseClick(object sender, DataGridViewCellMouseEventArgs e) { Show selectedShow = this.selectedShow = this.cinema.GetShowList()[e.RowIndex]; this.showTitle_lbl.Text = selectedShow.Title; this.showTime_lbl.Text = selectedShow.Time; this.showScreen_lbl.Text = selectedShow.ScreenNumber.ToString(); } private void confirmShow_btn_Click(object sender, EventArgs e) { if (this.selectedShow == null) return; Form2 seats = new Form2(this.selectedShow); seats.Show(); } And the code for FORM2 which is where the user selects their seats they want is: namespace CindysSeats { public partial class Form2 : Form { //booked seats could be added to booking object when you create it so that it is easily writable to the external file private List<Seat> bookedSeats = new List<Seat>(); private Show selectedShow; public Form2(Show selectedShow) { InitializeComponent(); this.selectedShow = selectedShow; this.showSeats_dg.DataSource = this.selectedShow.Seats; } private void showSeats_dg_RowHeaderMouseClick(object sender, DataGridViewCellMouseEventArgs e) { Seat selectedSeat = this.selectedShow.Seats[e.RowIndex]; if(this.bookedSeats.Contains(selectedSeat)) return; if(!selectedSeat.IsAvailable) return; this.bookedSeats.Add(selectedSeat); this.bookedSeats_lv.Items.Add(selectedSeat.ToString() + " " + selectedSeat.Price.ToString()+"\n"); this.bookedSeats_lv.Invalidate(); } private void bookSeats_btn_Click(object sender, EventArgs e) { } } thank you for helping

Read the article

Flex ItemRenderer/Editor ComboBox Issue...Puhleezz Help

- by Mohit

Hi EveryOne Beginner in Flex ...Even worse with item renderers... Have managed to add a Combobox to a datagrid using a itemEditor... I want to change the options in a combo box depending on the value selected by the user on a previous combo.. In the combo box i want to display a certain value (Model Name ) but for quering a table i'll pass the corresponding code of the model :(... sounds simple enough ..unfortunately not able to implement it I have found this problem on this site but the solution seems an overkill for my "small" problem..was hoping if anyone could guide me towards a more simpler solution... My xml comes as <item><mstValue>CH1</mstValue><mstRemarks>CARRIER</mstRemarks></item> <item><mstValue>CH2</mstValue><mstRemarks>TRANS</mstRemarks></item> <item><mstValue>CH3</mstValue><mstRemarks>YORK</mstRemarks></item> Now i have been able to show the values in a combo .if user selects CARRIER i want to pass CH1(dont know how to do it with itemeditors)...and then fetch values corresponding to CH1 from a table (second part of the problem)...in the sample below i used this.parentDocument.modelComboChanged(this.selectedItem) to pass the selected value ...instedd i need to pass the code for it which comes from the xml...Pls help this making me go crazy.... <mx:DataGrid id="chillerGrid" dataProvider="{chillerGridDp}" editable="true" itemRollOver="{ComponentUtil.setTooltip(event,this)}" itemRollOut="ComponentUtil.resetTooltip(event)" width="70%" height="160"> <mx:columns> <mx:DataGridColumn id="test" headerText="Model" dataField="model" editorDataField="value" editable="true" backgroundColor="#f4f2bd" width="100" > <mx:itemEditor> <mx:Component> <mx:ComboBox creationComplete="{if(text=='')selectedIndex=0;if(data && data.contactType!=undefined)text=data.contactType.text();}" change="{if(text == ''){selectedIndex=0;if(data && data.contactType!=undefined)text=data.contactType.text();};this.parentDocument.modelComboChanged(this.selectedItem)}" dataProvider="{this.parentDocument.arrColl1}" text="mstRemarks" labelField="mstRemarks" editable = "false" >  </mx:ComboBox>  </mx:Component> </mx:itemEditor> </mx:DataGridColumn> <mx:DataGridColumn headerText="Make" dataField="make" editorDataField="value" editable="true" backgroundColor="#f4f2bd" width="100" > <mx:itemEditor> <mx:Component> <mx:ComboBox creationComplete="{if(text=='')selectedIndex=0;if(data && data.contactType!=undefined)text=data.contactType.text();}" change="{if(text == ''){selectedIndex=0;if(data && data.contactType!=undefined)text=data.contactType.text();} }" labelField="@label" editable = "false" > <mx:dataProvider> <mx:String></mx:String> <mx:String>Carrier</mx:String> <mx:String>York</mx:String> <mx:String>Trane</mx:String> </mx:dataProvider> </mx:ComboBox> </mx:Component> </mx:itemEditor> </mx:DataGridColumn> <mx:DataGridColumn headerText="Chillers" dataField="chillers" width="200" editable="true"> <mx:itemEditor> <mx:Component> <mx:TextInput maxChars="49" /> </mx:Component> </mx:itemEditor> </mx:DataGridColumn> </mx:columns> </mx:DataGrid>

Read the article

Need help with a possible memory management problem(leak) regarding NSMutableArray

- by user309030

Hi, I'm a beginner level programmer trying to make a game app for the iphone and I've encountered a possible issue with the memory management (exc_bad_access) of my program so far. I've searched and read dozens of articles regarding memory management (including apple's docs) but I still can't figure out what exactly is wrong with my codes. So I would really appreciate it if someone can help clear up the mess I made for myself. - (void)viewDidLoad { [super viewDidLoad]; self.gameState = gameStatePaused; fencePoleArray = [[NSMutableArray alloc] init]; fencePoleImageArray = [[NSMutableArray alloc] init]; fenceImageArray = [[NSMutableArray alloc] init]; mainField = CGRectMake(10, 35, 310, 340); .......... [NSTimer scheduledTimerWithTimeInterval:0.05 target:self selector:@selector(gameLoop) userInfo:nil repeats:YES]; } So basically, the player touches the screen to set up the fences/poles -(void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { if(.......) { ....... } else { UITouch *touch = [[event allTouches] anyObject]; currentTapLoc = [touch locationInView:touch.view]; NSLog(@"%i, %i", (int)currentTapLoc.x, (int)currentTapLoc.y); if(CGRectContainsPoint(mainField, currentTapLoc)) { if([self checkFence]) { onFencePole++; //this 3 set functions adds their respective objects into the 3 NSMutableArrays using addObject: [self setFencePole]; [self setFenceImage]; [self setFencePoleImage]; ....... } } else { ....... } } } } The setFence function (setFenceImage and setFencePoleImage is similar to this) -(void)setFencePole { Fence *fencePole; if (!elecFence) { fencePole = [[Fence alloc] initFence:onFencePole fenceType:1 fencePos:currentTapLoc]; } else { fencePole = [[Fence alloc] initFence:onFencePole fenceType:2 fencePos:currentTapLoc]; } [fencePoleArray addObject:fencePole]; [fencePole release]; and whenever I press a button in the game, endOpenState is called to clear away all the extra images(fence/poles) on the screen and also to remove all existing objects in the 3 NSMutableArray -(void)endOpenState { ........ int xMax = [fencePoleArray count]; int yMax = [fenceImageArray count]; for (int x = 0; x < xMax; x++) { [[fencePoleImageArray objectAtIndex:x] removeFromSuperview]; } for (int y = 0; y < yMax; y++) { [[fenceImageArray objectAtIndex:y] removeFromSuperview]; } [fencePoleArray removeAllObjects]; [fencePoleImageArray removeAllObjects]; [fenceImageArray removeAllObjects]; ........ } The crash happens here at the checkFence function. -(BOOL)checkFence { if (onFencePole == 0) { return YES; } else if (onFencePole >= 1 && onFencePole < currentMaxFencePole - 1) { CGPoint tempPoint1 = currentTapLoc; CGPoint tempPoint2 = [[fencePoleArray objectAtIndex:onFencePole-1] returnPos]; // the crash happens at this line if ([self checkDistance:tempPoint1 point2:tempPoint2]) { return YES; } else { return NO; } } else if (onFencePole == currentMaxFencePole - 1) { ...... } else { return NO; } } What I'm thinking of is that fencePoleArray got messed up when I used [fencePoleArray removeAllObjects] because it doesn't crash when I comment it out. It would really be great if someone can explain to me what went wrong. And thanks in advance.

Read the article

Public class DiscoLight help

- by luvthug

Hi All, If some one can point me in the right direction for this code for my assigment I would really appreciate it. I have pasted the whole code that I need to complete but I need help with the following method public void changeColour(Circle aCircle) which is meant to allow to change the colour of the circle randomly, if 0 comes the light of the circle sgould change to red, 1 for green and 2 for purple. public class DiscoLight { /* instance variables */ private Circle light; // simulates a circular disco light in the Shapes window private Random randomNumberGenerator; /** * Default constructor for objects of class DiscoLight */ public DiscoLight() { super(); this.randomNumberGenerator = new Random(); } /** * Returns a randomly generated int between 0 (inclusive) * and number (exclusive). For example if number is 6, * the method will return one of 0, 1, 2, 3, 4, or 5. */ public int getRandomInt(int number) { return this.randomNumberGenerator.nextInt(number); } /** * student to write code and comment here for setLight(Circle) for Q4(i) */ public void setLight(Circle aCircle) { this.light = aCircle; } /** * student to write code and comment here for getLight() for Q4(i) */ public Circle getLight() { return this.light; } /** * Sets the argument to have a diameter of 50, an xPos * of 122, a yPos of 162 and the colour GREEN. * The method then sets the receiver's instance variable * light, to the argument aCircle. */ public void addLight(Circle aCircle) { //Student to write code here, Q4(ii) this.light = aCircle; this.light.setDiameter(50); this.light.setXPos(122); this.light.setYPos(162); this.light.setColour(OUColour.GREEN); } /** * Randomly sets the colour of the instance variable * light to red, green, or purple. */ public void changeColour(Circle aCircle) { //student to write code here, Q4(iii) if (getRandomInt() == 0) { this.light.setColour(OUColour.RED); } if (this.getRandomInt().equals(1)) { this.light.setColour(OUColour.GREEN); } else if (this.getRandomInt().equals(2)) { this.light.setColour(OUColour.PURPLE); } } /** * Grows the diameter of the circle referenced by the * receiver's instance variable light, to the argument size. * The diameter is incremented in steps of 2, * the xPos and yPos are decremented in steps of 1 until the * diameter reaches the value given by size. * Between each step there is a random colour change. The message * delay(anInt) is used to slow down the graphical interface, as required. */ public void grow(int size) { //student to write code here, Q4(iv) } /** * Shrinks the diameter of the circle referenced by the * receiver's instance variable light, to the argument size. * The diameter is decremented in steps of 2, * the xPos and yPos are incremented in steps of 1 until the * diameter reaches the value given by size. * Between each step there is a random colour change. The message * delay(anInt) is used to slow down the graphical interface, as required. */ public void shrink(int size) { //student to write code here, Q4(v) } /** * Expands the diameter of the light by the amount given by * sizeIncrease (changing colour as it grows). * * The method then contracts the light until it reaches its * original size (changing colour as it shrinks). */ public void lightCycle(int sizeIncrease) { //student to write code here, Q4(vi) } /** * Prompts the user for number of growing and shrinking * cycles. Then prompts the user for the number of units * by which to increase the diameter of light. * Method then performs the requested growing and * shrinking cycles. */ public void runLight() { //student to write code here, Q4(vii) } /** * Causes execution to pause by time number of milliseconds */ private void delay(int time) { try { Thread.sleep(time); } catch (Exception e) { System.out.println(e); } } }

Read the article

Intrinsics program (SSE) - g++ - help needed

- by Sriram

Hi all, This is the first time I am posting a question on stackoverflow, so please try and overlook any errors I may have made in formatting my question/code. But please do point the same out to me so I may be more careful. I was trying to write some simple intrinsics routines for the addition of two 128-bit (containing 4 float variables) numbers. I found some code on the net and was trying to get it to run on my system. The code is as follows: //this is a sample Intrinsics program to add two vectors. #include <iostream> #include <iomanip> #include <xmmintrin.h> #include <stdio.h> using namespace std; struct vector4 { float x, y, z, w; }; //functions to operate on them. vector4 set_vector(float x, float y, float z, float w = 0) { vector4 temp; temp.x = x; temp.y = y; temp.z = z; temp.w = w; return temp; } void print_vector(const vector4& v) { cout << " This is the contents of vector: " << endl; cout << " > vector.x = " << v.x << endl; cout << " vector.y = " << v.y << endl; cout << " vector.z = " << v.z << endl; cout << " vector.w = " << v.w << endl; } vector4 sse_vector4_add(const vector4&a, const vector4& b) { vector4 result; asm volatile ( "movl $a, %eax" //move operands into registers. "\n\tmovl $b, %ebx" "\n\tmovups (%eax), xmm0" //move register contents into SSE registers. "\n\tmovups (%ebx), xmm1" "\n\taddps xmm0, xmm1" //add the elements. addps operates on single-precision vectors. "\n\t movups xmm0, result" //move result into vector4 type data. ); return result; } int main() { vector4 a, b, result; a = set_vector(1.1, 2.1, 3.2, 4.5); b = set_vector(2.2, 4.2, 5.6); result = sse_vector4_add(a, b); print_vector(a); print_vector(b); print_vector(result); return 0; } The g++ parameters I use are: g++ -Wall -pedantic -g -march=i386 -msse intrinsics_SSE_example.C -o h The errors I get are as follows: intrinsics_SSE_example.C: Assembler messages: intrinsics_SSE_example.C:45: Error: too many memory references for movups intrinsics_SSE_example.C:46: Error: too many memory references for movups intrinsics_SSE_example.C:47: Error: too many memory references for addps intrinsics_SSE_example.C:48: Error: too many memory references for movups I have spent a lot of time on trying to debug these errors, googled them and so on. I am a complete noob to Intrinsics and so may have overlooked some important things. Any help is appreciated, Thanks, Sriram.

Read the article

Help with simple linux shell implementation

- by nunos

I am implementing a simple version of a linux shell in c. I have succesfully written the parser, but I am having some trouble forking out the child process. However, I think the problem is due to arrays, pointers and such, because just started C with this project and am not still very knowledgable with them. I am getting a segmentation fault and don't know where from. Any help is greatly appreciated. #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <sys/wait.h> #include <sys/types.h> #define MAX_COMMAND_LENGTH 250 #define MAX_ARG_LENGTH 250 typedef enum {false, true} bool; typedef struct { char **arg; char *infile; char *outfile; int background; } Command_Info; int parse_cmd(char *cmd_line, Command_Info *cmd_info) { char *arg; char *args[MAX_ARG_LENGTH]; int i = 0; arg = strtok(cmd_line, " "); while (arg != NULL) { args[i] = arg; arg = strtok(NULL, " "); i++; } int num_elems = i; if (num_elems == 0) return -1; cmd_info->infile = NULL; cmd_info->outfile = NULL; cmd_info->background = 0; int iarg = 0; for (i = 0; i < num_elems-1; i++) { if (!strcmp(args[i], "<")) { if (args[i+1] != NULL) cmd_info->infile = args[++i]; else return -1; } else if (!strcmp(args[i], ">")) { if (args[i+1] != NULL) cmd_info->outfile = args[++i]; else return -1; } else cmd_info->arg[iarg++] = args[i]; } if (!strcmp(args[i], "&")) cmd_info->background = true; else cmd_info->arg[iarg++] = args[i]; cmd_info->arg[iarg] = NULL; return 0; } void print_cmd(Command_Info *cmd_info) { int i; for (i = 0; cmd_info->arg[i] != NULL; i++) printf("arg[%d]=\"%s\"\n", i, cmd_info->arg[i]); printf("arg[%d]=\"%s\"\n", i, cmd_info->arg[i]); printf("infile=\"%s\"\n", cmd_info->infile); printf("outfile=\"%s\"\n", cmd_info->outfile); printf("background=\"%d\"\n", cmd_info->background); } void get_cmd(char* str) { fgets(str, MAX_COMMAND_LENGTH, stdin); str[strlen(str)-1] = '\0'; //apaga o '\n' do fim } pid_t exec_simple(Command_Info *cmd_info) { pid_t pid = fork(); if (pid < 0) { perror("Fork Error"); return -1; } if (pid == 0) { execvp(cmd_info->arg[0], cmd_info->arg); perror(cmd_info->arg[0]); exit(1); } return pid; } int main(int argc, char* argv[]) { while (true) { char cmd_line[MAX_COMMAND_LENGTH]; Command_Info cmd_info; printf(">>> "); get_cmd(cmd_line); if ( (parse_cmd(cmd_line, &cmd_info) == -1) ) return -1; parse_cmd(cmd_line, &cmd_info); if (!strcmp(cmd_info.arg[0], "exit")) exit(0); pid_t pid = exec_simple(&cmd_info); waitpid(pid, NULL, 0); } return 0; } Thanks.

Search Results

Search found 85307 results on 3413 pages for 'html help workshop'.

Page 442/3413 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449 | Next Page >

- by New Linq Baby

- by satya

- by newba

- by nunos

- by mikic

- by Eric

- by Robert

- by Jerry

- by user253530

- by dominoos

- by sandeepan-nath

- by peiska

- by Lucy

- by Chuck

- by user295189

- by Adam Kahtava

- by WarDoGG

- by Lasse V. Karlsen

- by shinjuo

- by cameron

- by Mohit

- by user309030

- by luvthug

- by Sriram

- by nunos

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449 | Next Page >