Search Results

Search found 23517 results on 941 pages for 'visual basic'.

Page 442/941 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• Good visuals supporting adopting Macintosh in a Windows company

  - by jdmuys

  I work in a Windows only software service company, which just put up an internal contest for innovative ideas for the company. The idea I submitted is to let employees use a Mac instead of the mandatory PC if they wished to. My idea has been selected (among a few others) to reach the next stage of the contest. One of the items requested for the next stage is ONE visual that best illustrates the idea. While my pitch is rather good (I think), I have a hard time coming up with ONE visual that would be suggestive enough and not too fanboy-ish, or too restricted. That's why I am requesting suggestions. For reference, some of the points I intend to develop are (not in order): de facto safety (little or no malware) Apple as a company reached its leading position through innovation (bio)diversity is a source of value for a service company, that expands its reach. it makes financial sense the Mac is the most compatible machine, making it a lot easier to test our software (especially web sites). Some OS X technologies can be valuable to a software service company (eg Applescript) Some Apple tools can help us improve (eg Keynote) It's good citizenship for our company as Apple is now best in class according to Greenpeace. I realize this question may be out of topic here. I'd be happy to have suggestions on where to post this question. Please do not argue why OS X might be better or worse than Windows. My question is very narrow. Thanks.

  Read the article

• Can enabling a RAID controller's writeback cache harm overall performance?

  - by Nathan O'Sullivan

  I have an 8 drive RAID 10 setup connected to an Adaptec 5805Z, running Centos 5.5 and deadline scheduler. A basic dd read test shows 400mb/sec, and a basic dd write test shows about the same. When I run the two simultaneously, I see the read speed drop to ~5mb/sec while the write speed stays at more or less the same 400mb/sec. The output of iostat -x as you would expect, shows that very few read transactions are being executed while the disk is bombarded with writes. If i turn the controller's writeback cache off, I dont see a 50:50 split but I do see a marked improvement, somewhere around 100mb/s reads and 300mb/s writes. I've also found if I lower the nr_requests setting on the drive's queue (somewhere around 8 seems optimal) I can end up with 150mb/sec reads and 150mb/sec writes; ie. a reduction in total throughput but certainly more suitable for my workload. Is this a real phenomenon? Or is my synthetic test too simplistic? The reason this could happen seems clear enough, when the scheduler switches from reads to writes, it can run heaps of write requests because they all just land in the controllers cache but must be carried out at some point. I would guess the actual disk writes are occuring when the scheduler starts trying to perform reads again, resulting in very few read requests being executed. This seems a reasonable explanation, but it also seems like a massive drawback to using writeback cache on an system with non-trivial write loads. I've been searching for discussions around this all afternoon and found nothing. What am I missing?

  Read the article

• How to get back the themes feature in Windows XP?

  - by Martín M.

  When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

  Read the article

• Blocking an IP from connecting

  - by Sam W.

  I have a problem with my Apache webserver where there's and IP than connecting to my server, using alot of connection and wont die which eventually making my webserver timeout. The connection will stay as SYN_SENT state if I check using netstat -netapu I even flush my iptables and use the basic rules and it still doesn't work. The IP will get connected when I start my Apache Basic rules that I use: iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -s 89.149.244.117 -j REJECT iptables -A OUTPUT -s 89.149.244.117 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT The bold part is rule in question. Not sure this is related but tcp_syncookies value is 1. Can someone point out my mistake? Is there a way to block it for good. Thank you

  Read the article

• Programs don't have permissions when using absolute path

  - by Markos

  I have asked this on askubuntu but didn't get a single response in days, so I will try it here. I have directory structure like this: /path/dir1 - all users in group1 must have rwx permissions, including subdirs and newly created dirs /path/dir1/dir2 - also users in group2 must have rwx permissions So what I tried is that I used ACL. getfacl /path/dir1 # file: /path/dir1 # owner: root # group: nogroup user::rwx group::--- group:group1:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:group1:rwx default:mask::rwx default:other::--- getfacl /path/dir1/dir2 # file: /path/dir1/dir2 # owner: root # group: nogroup user::rwx group::--- group:group1:rwx group:group2:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:group1:rwx default:group:group2:rwx default:mask::rwx default:other::--- That shows that I have granted rwx to group1 in /path/dir1 and rwx to group1 and group2 in /path/dir1/dir2. Now it gets interesting. Let's assume, that user2 is member of group2. If I issue commands as user2: cd /path/dir1/dir2 mkdir foo Then folder is succesfully created. However, if I do this: mkdir /path/dir1/dir2/foo I get permission denied error. I have tried extensively to resolve the problem. What I have found is that ACL is to blame. If I add permissions to group2 in /path/dir1 it starts to work. Also if I completely remove /path/dir1 ACL it starts to work. Obviously I am missing something VERY basic. I don't have much experience with linux, but this is a no-brainer on Windows. I have spent way too many hours to resolve this basic requirement. If you need more information, I will try to update the question, so feel free to ask!

  Read the article

• Apache: redirect to https before AUTH for server-status

  - by Putnik

  I want to force https and basic auth for server-status output (mod_status). If I enable auth and user asks for http://site/server-status apache first asks for pass, then redirects to httpS, then asks for pass again. This question is similar to Apache - Redirect to https before AUTH and force https with apache before .htpasswd but I cannot get it work because we are speaking not about generic folder but Location structure. My config (shortly) is as follows: <Location /server-status> SSLRequireSSL <IfModule mod_rewrite.c> RewriteEngine on RewriteBase /server-status RewriteCond %{HTTPS} off RewriteCond %{SERVER_PORT} 80 RewriteRule ^ - [E=nossl] RewriteRule (.*) https://site/server-status} [R=301,L] </IfModule> SetHandler server-status Order deny,allow Deny from all Allow from localhost ip6-localhost Allow from 1.2.3.0/24 Allow from env=nossl AuthUserFile /etc/httpd/status-htpasswd AuthName "Password protected" AuthType Basic Require valid-user Satisfy any </Location> I assume Allow from env=nossl should allow everyone with RewriteCond %{HTTPS} off and server port 80, then force it to redirect but it does not work. Please note, I do not want force to SSL the whole site but /server-status only. If it matters the server has several sites. What am I doing wrong? Thank you.

  Read the article

• Authenticate domain-user credentials on unjoined virtual machine?

  - by bwerks

  Hi all, This question may sound silly, and perhaps a bit insane, but--is there any way to run a process on a machine not joined to a domain using credentials from a user in that domain? In my case, I'm running virtual machines installed with release binaries from our build process, as well as Visual Studio. Visual Studio is there to debug our release binaries, however it's being executed with vm-local user credentials. This means that it can't authenticate to our TFS deployment when executing "tf.exe view" to utilize our Source Server for debugging. Team Explorer manages to authenticate to TFS using a UI prompt, however I suspect that it's because we supply it with the TFS deployment's URI, and it's designed to display a prompt to facilitate workgroup scenarios; i.e. it's not like we're getting it for free. My instincts tell me the only way to authenticate on this vm is to join it or somehow form a one-way trust or something, but is there an easier way? For automation we're going to want to script this eventually, but I'm first surveying the feasibility of the thing.

  Read the article

• Windows Action Center notification icon says Backup in Progress when no backup is occurring

  - by allquixotic

  How can I get Windows Action Center's little flag in the notification area to stop saying "Backup In Progress" on Windows 8? It's driving me nuts. I disabled the Windows Backup service completely and turned off File Recovery. Nothing that I can tell is using any disk I/O whatsoever, by examining Task Manager's resource monitor. It's just a visual cue that seems totally wrong considering my disk is only using about 50 KB/s of sporadic writes for superfetch etc. This wouldn't be a problem for me, since I rely on the knowledge that the Backup service is disabled and there's no disk activity, but I am trying to support a more traditional user who relies on visual cues from the operating system and trusts them over low-level observations like "...but the Windows Backup service is disabled!" Therefore this user still thinks that the backup is going on, even after the service is disabled. Technically, I think this is a bug in Windows 8. It really should not be displaying "Backup in Progress" if ... you know ... a backup, is not, in progress. Which it isn't. Is there a workaround?

  Read the article

• error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7]

  - by brazorf

  This error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] error is happening after i changed router. Actually, i found out that this error just happens on a ctrl+c signal, so it could be not representative about the error itself. The command i run is very basic: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory Basically, the rsync just stuck there and nothing's happening, until i ctrl+c. After interrupting the process i got the error in subject. I past the whole thing here: rsync -avvvvz --delete /source/path/ username@host:/path/to/direectory cmd=<NULL> machine=HOSTNAME user=username path=/path/to/direectory cmd[0]=ssh cmd[1]=-l cmd[2]=username cmd[3]=HOSTNAME cmd[4]=rsync cmd[5]=--server cmd[6]=-vvvvlogDtprze.iLsf cmd[7]=--delete cmd[8]=. cmd[9]=/path/to/direectory opening connection using: ssh -l username HOSTNAME rsync --server -vvvvlogDtprze.iLsf --delete . /path/to/direectory note: iconv_open("UTF-8", "UTF-8") succeeded. ^C[sender] _exit_cleanup(code=20, file=rsync.c, line=541): entered rsync error: unexplained error (code 130) at rsync.c(541) [sender=3.0.7] [sender] _exit_cleanup(code=20, file=rsync.c, line=541): about to call exit(130) The authentication runs on ssh via rsa key. I tried basic troubleshoot such as: ping the remote host ssh -l username remote.host check software firewall logs i asked the remote host sysadmin to check for logs, and when i run that command a ssh connection is actually being established and i can state there is no comunication/authentication/name resolution issue here. Rolling back to old router make this work again. Both client and server are running ubuntu 10.04. Try to take a look at my router configuration, where i'm no experienced at all, but i didnt see any "suspect" (what i was looking for is firewall blocking something) setting. The router itself is DLINK DVA-G3670B. Any suggestion? Thank You F.

  Read the article

• VLAN setup on my PC

  - by Surjya Narayana Padhi

  Hi Geeks, I am bit new to VLAN. I want my two computers communicate through VLAN. I have following queries. As I am new to it my queries may be somewhat vague in some points. But i would like to hear from experts for my basic queries. I have two PCs Computer A and Computer B in two different IP networks Network A and Network B Both my PC has windows OS installed. How to send a VLAN(#Number) tagged packet from Computer A to Computer B and how to detect and untag the packet at Computer B? (Please provide the steps for windows OS) For this action do I need to check if my ethernet card supports VLAN tagging/untagging? If yes how can I know if my card supports it or not? Is the VLAN applied for Wireless ethernet controllers also? Do I need any switch or router for this action? Experts please given your inputs so that I can have a strong basic. If anyone can give some inputs how i can detect those VLAN in wireshirk, it will be helpful me also. Thanks in advance.

  Read the article

• PowerShell 3.0 x64 bit broken after installing KB2506143

  - by Dave Parker

  I have searched using all kinds of variations on relevant terms and I cannot find a single other instance of someone else having this excact same problem, so I am hoping someone here may have a clue. Problem I installed Windows Management Framework 3.0 (KB2506143) by downloading and running Windows6.1-KB2506143-x64.msu from Microsoft.com. Once completed I rebooted my machine as requested. After rebooting and logging in, I try to run the 64-bit PowerShell command shell and it comes up for a second then goes away. The 32-bit shell seems to work fine, it is just the 64-bit one that fails. Looking in the Fusion logs, I found: *** Assembly Binder Log Entry (10/4/2012 @ 1:51:48 PM) *** The operation failed. Bind result: hr = 0x80070002. The system cannot find the file specified. Assembly manager loaded from: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll Running under executable C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe --- A detailed error log follows. === Pre-bind state information === LOG: User = ********\***** LOG: DisplayName = Microsoft.PowerShell.ConsoleHost, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL <remainder omitted> GacUtil reveals that there is a Microsoft.PowerShell.ConsoleHost, Version=1.0.0.0, but not 3.0.0.0. I tried uninstalling KB2506143 (which removed MSVCRT90.dll and caused Windows Live Messenger to fail on load after rebooting again, so I ran a repair in stall on Windows Live Essentials and that fixed the Messenger problem) and then re-installing it, but nothing changed. If it helps, here are what I think may be the relevant parts of my hardware/software environment. Environment Dell Latitude E6510, 8GB RAM Windows 7 Professional 64-bit with SP1 Visual Studio 2010 Professional installed (includes .NET 4.0) Visual Studio 2012 Professional installed Microsoft Forefront Client Security Any clues out there? Thanks, Dave

  Read the article

• How can I prevent Apache from asking for credentials on non SSL site

  - by Scott

  I have a web server with several virtual hosts. Some of those hosts have an associated ssl site. I have a DirectoryMatch directive in my main config file which requires basic authentication to any directory with secured as part of the directory path. On sites that have an SSL site, I have a rewrite rule (located in the non ssl config for that site), that redirects to the SSL site, same uri. The problem is the http (80) site asks for credentials first, and then the https (443) site asks for credentials again. I would like to prevent the http site from asking and thus avoid the potential for someone entering credentials and having them sent in clear text. I know I could move the DirectoryMatch down to the specific site, and just put the auth statement in the SSL config, but that would introduce the possibility of forgetting to protect critical directories when creating new sites. Here are the pertinent declarations: httpd.conf (all sites): <DirectoryMatch "_secured_"> AuthType Basic AuthName "+ + + Restrcted Area on Server + + +" AuthUserFile /home/websvr/.auth/std.auth Require valid-user </DirectoryMatch> site.conf (specific to individual site) <DirectoryMatch "_secured_"> RewriteEngine On RewriteRule .*(_secured_.*) https://site.com/$1 </DirectoryMatch> Is there a way to leave DirectoryMatch in the main config file and prevent the request for authorization from the http site? Running Apache 2 on Ubuntu 10.04 server from the default package. I have AllowOverride set to none - I prefer to handle things in the config files instead of .htaccess.

  Read the article

• Automating first time login process in Windows Server 2008 R2 SP1 virtual machine

  - by George Durzi

  I have a set of Windows 2008 Server R2 SP1 Enterprise Edition virtual machines running in Hyper-V. The host server has 64GB of RAM and two SSD drives (one drive for the host OS, and the second one for the VMs). The virtual machines are as follows: Domain Controller: 4GB RAM Exchange Server: 4GB RAM Terminal Services: 50GB RAM We use this setup for a travelling training class where users remote desktop to one of the VMs - let's call it the Terminal Services or "TS" VM - where tools such as Visual Studio are installed. The students go through some labs on the TS VMs in Visual Studio. Overall, this setup works great. However, when users are collectively logging in for the first time, the VM really struggles to keep up while all the user profiles are created. It can take some users up to 10 minutes to login. The number varies from 30 to 40 students. A workaround to this would be to manually remote desktop to the TS virtual machine using all the accounts to ensure that the local profile is created in advance. I'm looking for a way to automate the first time login process on the TS virtual machine. I am envisioning iterating through the accounts in a certain Active Directory OU, and then somehow initiating a remote desktop session to the TS VM to log them in for the first time. Are there ways to do this? Thanks

  Read the article

• How can I password protect an IIS directory with only FTP access?

  - by Tony Adams

  How can I password protect an IIS directory when I only have FTP access to the server? I can't adjust any IIS settings or add users or anything like that. The answer to: IIS Basic Authorization ala .htaccess/.htpasswd in apache does not help as I only have access to the server via FTP. I just need to password protect a directory. I've tried several variations of a web.config file. I can get a basic HTTP auth form to pop up when a user attempts to load a page from my test directory, but I can't configure the authentication part. The server complains that: Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. whenever I add an <authentication> section to my web.config. I'm grateful for any help anyone can offer. Edit: I don't know what version of IIS is running on this server, but here is the server tag from error messages: Version Information: Microsoft .NET Framework Version:1.1.4322.2490; ASP.NET Version:1.1.4322.2494

  Read the article

• Mechanism behind user forwarding in ScriptAliasMatch

  - by jolivier

  I am following this tutorial to setup gitolite and at some point the following ScriptAliasMatch is used: ScriptAliasMatch \ "(?x)^/(.*/(HEAD | \ info/refs | \ objects/(info/[^/]+ | \ [0-9a-f]{2}/[0-9a-f]{38} | \ pack/pack-[0-9a-f]{40}\.(pack|idx)) | \ git-(upload|receive)-pack))$" \ /var/www/bin/gitolite-suexec-wrapper.sh/$1 And the target script starts with USER=$1 So I am guessing this is used to forward the user name from apache to the suexec script (which indeed requires it). But I cannot see how this is done. The ScriptAliasMatch documentation makes me think that the /$1 will be replaced by the first matching group of the regexp before it. For me it captures from (?x)^/(.* to ))$ so there is nothing about a user here. My underlying problem is that USER is empty in my script so I get no authorizations in gitolite. I give my username to apache via a basic authentication: <Location /> # Crowd auth AuthType Basic AuthName "Git repositories" ... Require valid-user </Location> defined just under the previous ScriptAliasMatch. So I am really wondering how this is supposed to work and what part of the mechanism I missed so that I don't retrieve the user in my script.

  Read the article

• Getting 404 error on MVC web-site

  - by RB

  I have an IIS7.5 web-site, on Windows Server 2008, with an ASP.NET MVC2 web-site deployed to it. The website was built in Visual Studio 2008, targeting .NET 3.5, and IIS 5.1 has been successfully configured to run it as well, for local testing. We've installed the world's simplest MVC application (the one which is created when you create a new MVC2 project in Visual Studio), and we are getting 404s on any page we try and access - e.g. <my_server>/Home/About will generate a 404. I've asked this question on StackOverflow as well, but that was before I knew it was a server issue. I have checked the following things: There are 404 entries in the IIS log, corresponding to each request. The application pool for the web-site is set to use the Integrated pipeline. The "customErrors" mode is set to off. .NET 3.5 SP1 is installed ASP.NET MVC 2 is installed I've used MVC Diagnostics to confirm all MVC DLLs are being found. ASP.NET is enabled in IIS, which we've demonstrated by running the MVC Diagnostics page. KB 2023146 did highlight that HTTP Redirection was off, so we've turned it on, but no joy. Any ideas will be greatly appreciated! Someone did suggest that there might be problems running it caused by Windows Server 2008 being 64-bit - does anyone know anything about this?

  Read the article

• Why is dwm.exe using so much memory?

  - by Leonard Challis

  I've scoured the web, but I'm sick of reading "scan your computer for viruses" and "upgrade your RAM" on answers to similar questions to this. I understand that dwm.exe is for (simply put) caching bitmaps for things like Aero-peek and similar, but as far as I have read it shouldn't be using vast amounts of memory. My colleague and I both have 4GB of RAM, Core 2 Duo, blah, blah -- essentially they're pretty capable. His dwm.exe is running at around 30mb, mind is currently running at about half a gig, though it does fluctuate quite a lot. This is the same while running the exact same applications (currently Zend studio, FireFox (with firemin - low memory usage), Outlook). Every so often I will get a notification asking me if I want to switch to Aero Basic because it's using too much memory, and sometimes it will just switch itself to basic and let me know why. I know it's possible to stop it switching, but I want to know why it is using too much memory otherwise it's just papering over the cracks. One thing to add is this seems to have started after a robbery on Monday, where two of my monitors were stolen, and I had to temporarily use a couple of alternative monitors. I am now using brand new monitors but the problem is the same. All drivers installed and working seemingly fine. Any ideas why the usage is so high? We are using windows 7 64-bit Professional.

  Read the article

• What is the proper way of debugging a slow Windows installation?

  - by Niklas

  You know the drill - you've been asked to check why you cousin's computer is running slow. I was there yesterday. Being a Mac user since 2007 I haven't really dug deep in Windows internals in the past five years. Googling for answers reveals many, many different answers: broken registry, spyware, antivirus program, fragmented disk, turning of visual effects etc. In this particular case I was asked to look at a two year old HP laptop with Vista. Windows was running incredibly slow and even opening up a new explorer window took almost a minute. I ended up doing everything of the above: running cc cleaner, defragmenting the disk, turning off visual effects, turning off norton and a bunch of other things people believe have an impact on Windows performance. Now I'd like to understand this in depth. Is there a proper, "scientific" if you so will, way of debugging and understanding where the problem with a slow running Windows installation lies? (In my particular case this concerned Windows Vista but let's try to create general guide for XP and Windows 7 too). To me, it seems wrong to just run a bunch of different tools without understanding the underlying cause of the error.

  Read the article

• Good Enough Failover Strategy for DNS / MySQL / Email

  - by IMB

  I've asked and read a lot questions regarding DNS failover but the more I read the more complicated it becomes, some people say it's good enough some say it isn't. No clear answers from what I read. I was wondering if we can set it straight once and for all, at least for the requirements of most websites out there. Right now let's assume the following: We don't need really need load-balancing, what we need is a failover solution. We are running a website based on LAMP on a VPS. We need to make sure that the Web Server, MySQL, Email are always accessible if not 99%. Basically here's my idea and questions about it: Web Server: We need at least one failover server (another VPS on a separate data center). Is DNS Failover via Round Robin good, if not, what's the best? And how do you exactly implement it? How do you make the files you upload/delete on Server A is also on Server B? MySQL: I've only read a brief intro to MySQL replication and I assume that I can replicate Server A to Server B and vice versa on the fly right? So just it case Server A fails and Server B is now running, it will continue to work and replicate to Server A when it becomes available. So in essence Server B is now the primary server, and will later on failover to Server A, should a failure happen again. Email: If we are gonna use DNS Failover, using webmail or relying on emails stored on the server is probably not a good idea right? Since some emails might be on Server A while some might be on Server B? I assume a basic email forwarder to a 3rdparty is good enough (like Gmail for example) to ensure all emails are kept in one place. Here's a basic diagram for a better picture: http://i.stack.imgur.com/KWSIi.png

  Read the article

• How do I set up dual monitors on Kubuntu 10.04 using the latest nVidia drivers with a 9800M video ca

  - by NoCatharsis

  I'm a Linux newb so please try to keep the lingo low-key. I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA. Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this. Several issues have arisen since installation: 1) I've clicked through all of the display settings to activate the second screen with absolutely no change. 2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure. 3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.

  Read the article

• System occasionally hangs boot process with SLES 11

  - by ThaMe90

  I have several (new) systems on which I had to install SLES11 on. However, after a few (though not every) reboots, the system hangs during the boot sequence. It will only continue after I physically press a key on the keyboard. From what I've found in the dmesg log from a failed boot is the following: [ 22.170276] sd 0:0:0:0: [sda] Mode Sense: b7 00 00 08 [ 22.171155] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.182760] sda: sda1 sda2 sda3 [ 22.383424] sd 0:0:0:0: [sda] Attached SCSI disk [ 22.545372] PM: Marking nosave pages: 000000000009a000 - 0000000000100000 [ 22.545377] PM: Marking nosave pages: 00000000bf780000 - 0000000100000000 [ 22.546217] PM: Basic memory bitmaps created [ 22.590380] PM: Basic memory bitmaps freed [ 22.596284] PM: Starting manual resume from disk [ 22.602319] PM: Resume from partition 8:1 [ 22.602321] PM: Checking hibernation image. [ 22.602479] PM: Error -22 checking image file [ 22.602481] PM: Resume from disk failed. [ 22.718727] kjournald starting. Commit interval 15 seconds [ 22.718960] EXT3-fs (sda3): using internal journal [ 22.718964] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 1555.644404] udevd version 128 started [ 1555.697664] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1555.707961] ACPI: Power Button [PWRB] I've looked around the internet for the PM: Resume from disk failed. message, but this seems to only be important when restoring the system after a hybernate, i.e. restore from the hdd. But this is not my situation. I only get this after a reboot, as I said before. The timestamp [ 1555.xxxxxx] is only the result of me pressing a key on the keyboard. Any suggestions on how to proceed? As I am getting stuck on this issue.

  Read the article

• Some SVN Repositories not working - 405

  - by Webnet

  I have 2 groups of repositories, web and engineering. I setup web about 3 months ago and it works great, I'm trying to move engineering over to this same SVN server and I'm getting a PROPFIND of /svn/engineering/main: 405 Method Not Allowed error when I try to do a checkout. I can checkout/commit for /svn/web just fine dav_svn.conf This is the only thing uncommented in this file.... <Location /svn/web> DAV svn SVNParentPath /var/svn-repos/web AuthType Basic AuthName "SVN Repository" AuthUserFile /etc/svn-auth-file Require valid-user </Location> <Location /svn/engineering> DAV svn SVNParentPath /var/svn-repos/engineering AuthType Basic AuthName "SVN Repository" AuthUserFile /etc/svn-auth-file Require valid-user </Location> /var/svn-repos/ drwxrwx--- 3 www-data subversion 4096 2010-06-11 11:57 engineering drwxrwx--- 5 www-data subversion 4096 2010-04-07 15:41 web /var/svn-repos/web - WORKING drwxrwx--- 7 www-data subversion 4096 2010-04-07 16:50 site1.com drwxrwx--- 7 www-data subversion 4096 2010-03-29 16:42 site2.com drwxrwx--- 7 www-data subversion 4096 2010-03-31 12:52 site3.com /var/svn-repos/engineering - NOT WORKING drwxrwx--- 6 www-data subversion 4096 2010-06-11 11:56 main I get to the bottom and now realize that there's a 6 on that last one not a 7..... what does that number mean?

  Read the article

• Why can't I debug my ASP project through a remote desktop connection?

  - by Anthony Benavente

  I just asked this question in Stack Overflow but I figured this stack exchange forum is a better fit. It's been about a month of trying to figure out this problem and we've still not found a solution. We have about seven virtual machines on a server running Windows XP Professional w/ SP 3 all with Visual Studio Interdev and IIS 5.1 installed. Running the programs all work fine, but we just can't debug through remote desktop. When we are logged into the server console (through VM Sphere) and log into one of the virtual machines through there, we are able to debug properly. We figured the issue lies with some kind of permissions for Remote Desktop Users. We've tried nearly every article on the internet (exaggerating of course) and are about to give up hope. One more thing, when we are logged into the virtual machine through the server console and then remote in, the user that was logged into the console is kicked off but debugging works! Does remoting in trick the computer into giving us the correct permissions? I'm really not sure how it works. I know that this technology predates human history, but we are in the process of migrating from ASP Classic to ASP.NET Specs: - Windows XP Professional W/ SP3 - IIS 5.1 - Visual Studio 6 Interdev EDIT: By "debug" I mean running the project with breakpoints. Interdev doesn't stop at breakpoints.

  Read the article

• Sending mails via Mutt and Gmail: Duplicates

  - by Chris

  I'm trying to setup mutt wiht gmail for the first time. It seems to work pretty well, however when I send a mail from Mutt i appears twice in Gmail's sent folder. (I assume it's also sent twice - I'm trying to validate that) My configuration (Stripped of coloring): # A basic .muttrc for use with Gmail # Change the following six lines to match your Gmail account details set imap_user = "XX" set smtp_url = "[email protected]@smtp.gmail.com:587/" set from = "XX" set realname = "XX" # Change the following line to a different editor you prefer. set editor = "vim" # Basic config, you can leave this as is set folder = "imaps://imap.gmail.com:993" set spoolfile = "+INBOX" set imap_check_subscribed set hostname = gmail.com set mail_check = 120 set timeout = 300 set imap_keepalive = 300 set postponed = "+[Gmail]/Drafts" set record = "+[Gmail]/Sent Mail" set header_cache=~/.mutt/cache/headers set message_cachedir=~/.mutt/cache/bodies set certificate_file=~/.mutt/certificates set move = no set include set sort = 'threads' set sort_aux = 'reverse-last-date-received' set auto_tag = yes hdr_order Date From To Cc auto_view text/html bind editor <Tab> complete-query bind editor ^T complete bind editor <space> noop # Gmail-style keyboard shortcuts macro index,pager y "<enter-command>unset trash\n <delete-message>" "Gmail archive message" macro index,pager d "<enter-command>set trash=\"imaps://imap.googlemail.com/[Gmail]/Bin\"\n <delete-message>" "Gmail delete message" macro index,pager gl "<change-folder>" macro index,pager gi "<change-folder>=INBOX<enter>" "Go to inbox" macro index,pager ga "<change-folder>=[Gmail]/All Mail<enter>" "Go to all mail" macro index,pager gs "<change-folder>=[Gmail]/Starred<enter>" "Go to starred messages" macro index,pager gd "<change-folder>=[Gmail]/Drafts<enter>" "Go to drafts" macro index,pager gt "<change-folder>=[Gmail]/Sent Mail<enter>" "Go to sent mail" #Don't prompt on exit set quit=yes ## ================= #Color definitions ## ================= set pgp_autosign

  Read the article

• My yum repository able to search packages, but not able to install it in RHEL?

  - by mandy

  I set up yum from dvd. Following is the containts of my .repo file: [dvd] name=Red Hat Enterprise Linux Installation DVD baseurl=file:///media/dvd enabled=0. I'm able to search packages. However while installation I'm getting below error: [root@localhost dvd]# yum install libstdc++.x86_64 Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. Setting up Install Process Nothing to do My Yum Search output: [root@localhost dvd]# yum search gcc Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. ============================================================================= Matched: gcc ============================================================================= compat-libgcc-296.i386 : Compatibility 2.96-RH libgcc library compat-libstdc++-296.i386 : Compatibility 2.96-RH standard C++ libraries compat-libstdc++-33.i386 : Compatibility standard C++ libraries compat-libstdc++-33.x86_64 : Compatibility standard C++ libraries cpp.x86_64 : The C Preprocessor. libgcc.i386 : GCC version 4.1 shared support library libgcc.x86_64 : GCC version 4.1 shared support library libgcj.i386 : Java runtime library for gcc libgcj.x86_64 : Java runtime library for gcc libstdc++.i386 : GNU Standard C++ Library libstdc++.x86_64 : GNU Standard C++ Library libtermcap.i386 : A basic system library for accessing the termcap database. libtermcap.x86_64 : A basic system library for accessing the termcap database. Please guide me on this, I want to install gcc on my RHEL.

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >