Search Results

Search found 14402 results on 577 pages for 'interface builder'.

Page 445/577 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

  • Sony VAIO is booting directly into Windows without showing grub

    - by Rohan Dhruva
    I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

    Read the article

  • Speaking at Mix11

    - by Dennis Vroegop
    In April Microsoft will hold the next MIX event. MIX was usually targeted at web designers and developers but has grown over the years to be more a general conference focused on the web and devices. In other words: everything the normal consumer might encounter. It’s not your typical developers conference, although you’ll find many developers there as well. But next to the developers you’ll probably run into designers and user experience specialists as well. This year I am proud to say that I will be one of the people presenting there. Together with all the Surface MVP’s in the world (sounds impressive, but there are only 7 of us) we’ll host a panel discussion on all things Surface, NUI and everything else that matches those subjects. Here’s what the abstract says: The Natural User Interface (NUI) is a hot topic that generates a lot of excitement, but there are only a handful of companies doing real innovation with NUIs and most of the practical experience in the NUI style of design and development is limited to a small number of experts. The Microsoft Surface MVPs are a subset of these experts that have extensive real-world experience with Microsoft Surface and other NUI devices. This session is a panel featuring the Microsoft Surface MVPs and an unfiltered discussion with each other and the audience about the state of the art in NUI design and development. We will share our experiences and ideas, discuss what we think NUI will look like in the near future, and back up our statements with cutting-edge demonstrations prepared by the panelists involving combinations of Microsoft Surface 2.0, Kinect, and Windows Phone 7. We, as Surface MVPs think we are more than just Surface oriented. We like to think we are more NUI MVP’s. But since that’s not a technology with Microsoft you can’t actually become a NUI MVP so Surface is the one that comes the closest. We are currently working on the details of our session but believe me: it will blow you away. Several people we talked to have said this could potentially be the best session of Mix. Quite a challenge, but we’re up for it! Of course I won’t be telling you exactly what we’re going to do in Las Vegas but rest assured that when you visit our session you’ll leave with a lot of new ideas and hopefully be inspired to bring into practice what you’ve seen. Even if the technology we’ll show you isn’t readily available yet. So, if you are in Las Vegas between April 12th and 14th, please join Joshua Blake, Neil Roodyn, Rick Barraza, Bart Roozendaal, Josh Santangelo, Nicolas Calvi and myself for some NUI fun! See you in Vegas! Tags van Technorati: mix11,las vegas,surface,nui,kinecct

    Read the article

  • How to build a Singleton-like dependency injector replacement (Php)

    - by Erparom
    I know out there are a lot of excelent containers, even frameworks almost entirely DI based with good strong IoC classes. However, this doesn't help me to "define" a new pattern. (This is Php code but understandable to anyone) Supose we have: //Declares the singleton class bookSingleton { private $author; private static $bookInstance; private static $isLoaned = FALSE; //The private constructor private function __constructor() { $this->author = "Onecrappy Writer Ofcheap Novels"; } //Sets the global isLoaned state and also gets self instance public static function loanBook() { if (self::$isLoaned === FALSE) { //Book already taken, so return false return FALSE; } else { //Ok, not loaned, lets instantiate (if needed and loan) if (!isset(self::$bookInstance)) { self::$bookInstance = new BookSingleton(); } self::$isLoaned = TRUE; } } //Return loaned state to false, so another book reader can take the book public function returnBook() { $self::$isLoaned = FALSE; } public function getAuthor() { return $this->author; } } Then we get the singelton consumtion class: //Consumes the Singleton class BookBorrower() { private $borrowedBook; private $haveBookState; public function __construct() { this->haveBookState = FALSE; } //Use the singelton-pattern behavior public function borrowBook() { $this->borrowedBook = BookSingleton::loanBook(); //Check if was successfully borrowed if (!this->borrowedBook) { $this->haveBookState = FALSE; } else { $this->haveBookState = TRUE; } } public function returnBook() { $this->borrowedBook->returnBook(); $this->haveBookState = FALSE; } public function getBook() { if ($this->haveBookState) { return "The book is loaned, the author is" . $this->borrowedbook->getAuthor(); } else { return "I don't have the book, perhaps someone else took it"; } } } At last, we got a client, to test the behavior function __autoload($class) { require_once $class . '.php'; } function write ($whatever,$breaks) { for($break = 0;$break<$breaks;$break++) { $whatever .= "\n"; } echo nl2br($whatever); } write("Begin Singleton test", 2); $borrowerJuan = new BookBorrower(); $borrowerPedro = new BookBorrower(); write("Juan asks for the book", 1); $borrowerJuan->borrowBook(); write("Book Borrowed? ", 1); write($borrowerJuan->getAuthorAndTitle(),2); write("Pedro asks for the book", 1); $borrowerPedro->borrowBook(); write("Book Borrowed? ", 1); write($borrowerPedro->getAuthorAndTitle(),2); write("Juan returns the book", 1); $borrowerJuan->returnBook(); write("Returned Book Juan? ", 1); write($borrowerJuan->getAuthorAndTitle(),2); write("Pedro asks again for the book", 1); $borrowerPedro->borrowBook(); write("Book Borrowed? ", 1); write($borrowerPedro->getAuthorAndTitle(),2); This will end up in the expected behavior: Begin Singleton test Juan asks for the book Book Borrowed? The book is loaned, the author is = Onecrappy Writer Ofcheap Novels Pedro asks for the book Book Borrowed? I don't have the book, perhaps someone else took it Juan returns the book Returned Book Juan? I don't have the book, perhaps someone else took it Pedro asks again for the book Book Borrowed? The book is loaned, the author is = Onecrappy Writer Ofcheap Novels So I want to make a pattern based on the DI technique able to do exactly the same, but without singleton pattern. As far as I'm aware, I KNOW I must inject the book inside "borrowBook" function instead of taking a static instance: public function borrowBook(BookNonSingleton $book) { if (isset($this->borrowedBook) || $book->isLoaned()) { $this->haveBook = FALSE; return FALSE; } else { $this->borrowedBook = $book; $this->haveBook = TRUE; return TRUE; } } And at the client, just handle the book: $borrowerJuan = new BookBorrower(); $borrowerJuan-borrowBook(new NonSingletonBook()); Etc... and so far so good, BUT... Im taking the responsability of "single instance" to the borrower, instead of keeping that responsability inside the NonSingletonBook, that since it has not anymore a private constructor, can be instantiated as many times... making instances on each call. So, What does my NonSingletonBook class MUST be in order to never allow borrowers to have this same book twice? (aka) keep the single instance. Because the dependency injector part of the code (borrower) does not solve me this AT ALL. Is it needed the container with an "asShared" method builder with static behavior? No way to encapsulate this functionallity into the Book itself? "Hey Im a book and I shouldn't be instantiated more than once, I'm unique"

    Read the article

  • Commandline Purge in AS11

    - by Dheeraj Kumar
    AS11 - B2B offering consists of numerous features that have been made available via commandline approach. Most of these are supplement to the already available User Interface based approach. One such is purging of runtime data. The commandline purge option enables the users to purge the runtime data, based on various criteria. This is an ANT based command, provides the flexibility to selectively set the criteria to purge the runtime data. Providing the command line option also enables the administrator to purge in bulk, without visiting the B2B UI, which can also be used for automation purpose By default archival is turned on for purge activity. As a pre-requisite, the respective folder needs to be configured in database with the proper permission. When no filename is provided for archived data, the sysdate will be considered for filename. Below are the various options to purge the runtime data Normal 0 Option ANT option   Message state -Dmsgstate   Date range -Dfromdate,  -Dtodate Format : dd/mm/yyyy hh:mm AM/PM Trading partner -Dtp   Direction -Ddirection   Message Type -Dmsgtype   Agreement Name -Dagreement   IdType/ value -Didtype,  -Didvalue   Archive -Darchive True/false By default true Archive file name -Darchivename File name (optional), will be used when archive is set to true. Normal 0 Note: When using -Darchivename the value must be a unique file name. An existing file name used with -Darchivename throws an exception v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 Below are the few of ant commands and various options.   Purge based on date range and message state: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dfromdate="19/12/2009 1:04 AM" -Dtodate="19/12/2009 1:05 AM" -Dmsgstate=MSG_COMPLETE -Darchivename="filename.dmp"  Purge based on direction: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" Normal 0 Purge based on agreement Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dagreement="agreement_name" Normal 0 Purge based on Trading partner Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dtp=GlobalChips Normal 0 Purge based on Message State: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dmsgstate="MSG_COMPLETE" Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" -Dmsgstate="MSG_COMPLETE"

    Read the article

  • What does the `dmesg` error: "composite sync not supported" mean?

    - by M. Tibbits
    Question: I see [ 20.473125] composite sync not supported and several such entries when I run dmesg. What do they mean? Background: I'm trying to debug a problem where my laptop won't suspend. Since acpi seems happy and I can suspend easily from the command line, I've turned to tracking down all boot-up errors/warnings. So I run dmesg | grep not and, amongst other shtuff, I get: 728:[ 17.267120] composite sync not supported 733:[ 18.009061] composite sync not supported 740:[ 18.159289] registered panic notifier 749:[ 18.162500] vga16fb: not registering due to another framebuffer present 757:[ 18.598251] composite sync not supported 776:[ 20.473125] composite sync not supported 777:[ 20.932266] composite sync not supported 778:[ 28.350231] composite sync not supported 779:[ 28.924913] composite sync not supported 780:[ 35.480658] composite sync not supported And the full log for the few lines right around that first appearance (line 728) is listed at the bottom of my post (I'd happily include anything else). Any ideas what could be causing this? I've read several sites: Ubuntuforums #1 IRC Chat #1 One post talks about ??Adobe flash?? causing this error? Some others also suggest that it might be an nvidia related problem, but I've got a Dell Latitude D630 with an integrated Intel graphics -- so nvidia isn't the problem. [ 17.207142] phy0: Selected rate control algorithm 'minstrel' [ 17.207833] Registered led device: b43-phy0::tx [ 17.207849] Registered led device: b43-phy0::rx [ 17.207865] Registered led device: b43-phy0::radio [ 17.207927] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 17.267120] composite sync not supported [ 17.415795] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 17.602131] [drm] initialized overlay support [ 17.620201] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 17.641192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.009061] composite sync not supported [ 18.106042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.108115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 18.108941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.109676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.110356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.159286] fb0: inteldrmfb frame buffer device [ 18.159289] registered panic notifier [ 18.160218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 18.160286] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 18.160334] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 18.160432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 18.160491] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 18.160539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.162494] vga16fb: initializing [ 18.162497] vga16fb: mapped to 0xc00a0000 [ 18.162500] vga16fb: not registering due to another framebuffer present [ 18.176091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 18.176123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.285752] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 18.312497] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.312586] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.328043] usbcore: registered new interface driver ndiswrapper [ 18.460909] Console: switching to colour frame buffer device 180x56 [ 18.598251] composite sync not supported

    Read the article

  • MySQL Enterprise Backup 3.8.2 - Overview

    - by Priya Jayakumar
      MySQL Enterprise Backup (MEB) is the ideal solution for backing up MySQL databases. MEB 3.8.2 is released in June 2013. MySQL Enterprise Backup 3.8.2 release’s main goal is to improve usability. With this release, users can know the progress of backup completed both in terms of size and as a percentage of the total. This release also offers options to be able to manage the behavior of MEB in case the space on the secondary storage is completely exhausted during backup. The progress indicator is a (short) string that indicates how far the execution of a time-consuming MEB command has progressed. It consists of one or more "meters" that measures the progress of the command. There are two options introduced to control the progress reporting function of mysqlbackup command (1) –show-progress (2) –progress-interval. The user can control the progress indicator by using “--show-progress” option in any of the MEB operations. This option instructs MEB to output periodically short reports on the progress of time-consuming commands. The argument of this option instructs where the output could be sent. For example it could be stderr, stdout, file, fifo and table. With the “--show-progress” option both the total size of the backup to be copied and the size that’s already copied will be shown. Along with this, the state of the operation for example data or meta-data being copied or tables being locked and other such operations will also be reported. This gives more clear information to the DBA on the progress of the backup that’s happening. Interval between progress report in seconds is controlled by “--progress-interval” option. For more information on this please refer progress-report-options. MEB can also be accessed through GUI from MySQL WorkBench’s next version. This can be used as the front end interface for MEB users to perform backup operations at the click of a button. This feature was highly requested by DBAs and will be very useful. Refer http://insidemysql.com/mysql-workbench-6-0-a-sneak-preview/ for WorkBench upcoming release info. Along with the progress report feature some of the important issues like below are also addressed in MEB 3.8.2. In MEB 3.8.2 a new command line option “--on-disk-full” is introduced to abort or warn the user when a backup process encounters a full disk condition. When no option is given, by default it would abort. A few issues related to “incremental-backup” are also addressed in this release. Please refer 3.8.2 documentation for more details. It would be good for MEB users to move to 3.8.2 to take incremental backups. Overall the added usability and the important defects fixed in this release makes MySQL Enterprise Backup 3.8.2 a promising release.  

    Read the article

  • SSIS and StreamInsight Working Together.

    I have been thinking a lot recently about what it would be like to have StreamInsight and SSIS working together.  Well the CAT team have produced a paper on some of our options here. Here are some of my thoughts. There is of course a slight mismatch in their types of usage.  StreamInsight is an Event Stream processing engine capable of operating on new data in the sub second timeframe.  The engine allows you to do real time analytics and take decisions on events that have potentially only just happened.  SSIS on the other hand is a batch processing engine.  In general I do not like having to invoke the same package more than once every 90 seconds or so as it can start to get expensive.  Usually when doing batch processing we have an hour or longer of grace before we have to move data from A –> B. StreamInsight operates on streams of data.  Before anyone mentions it yes I know StreamInsight is equally adept at using the IEnumerable interface, but I would argue live streaming and real-time analytics is a primary goal of the product.  SSIS does not have an “Always On” button I do not like the idea of embedding StreamInsight inside SSIS using a transform particularly.  It means StreamInsight becomes a batch processing engine because it can only operate when the SSIS package is running and SSIS is in charge of when that happens. If I am to have StreamInsight within SSIS then I prefer to have StreamInsight on the adapters.  This way you can force the adapters to stay open and introduce events into your Pipeline.   SSIS has a much richer set of transforms out of the box than StreamInsight.  Although “Always On” was not a design goal of SSIS I have used it like this and it works just fine. SSIS being called from within StreamInsight, now that excites me.  see below   For a while now I have been thinking what it would be like to decouple the Data Flow task from the SSIS package and expose it as something with which you can interact.  Anything can instantiate this version of a DFT as it would expose one or more  input interfaces and one or more output interfaces.  I can imagine that this would be a big hit when moving to “The Cloud” as well.  I could see the Data Flow task maybe being hosted in Azure Appfabric or some such layer. StreamInsight would be able to take advantage of this as well.   I am interested to see where this goes and will be pressing for more meat around the subject when I visit Redmond soon.

    Read the article

  • Configurable Objects - Introduction

    - by Anthony Shorten
    One of the interesting facilities in the framework is Configurable Object functionality (it is also known as Task Optimization and also known as Cool Tools). The idea is that any implementation can create their own views of the base product objects and services and implement functionality against those new views. For example, in Oracle Utilities Customer Care and Billing, there is a Person object. That object is used to store and manage information about individuals as well as companies. In the base product you would use the Person Maintenance screen and fill in some of the screen when you wanted to register or maintain and individual as well and fill out other parts of the screen when you wanted to register or maintain a company. This can be somewhat confusing to some customers. Using Configurable Objects this can be simplified. A business object can be created that is a view of the any object. For example, you could create a Human business object which would cover the aspects of the Person object pertaining to an individual and a Company business object to cover the aspects unique to a company. Even the tag names (i.e. Field Names) in the object can be changed to be more what the implementation is familiar with. The object can also restructure the object. For example, a common identifier for an individual in the USA is the Social Security number, this value is a Person Identifier (as this varies in each country). In the new Human object you can remap the Person Identifier as a Social Security number. To define a Business Object you use a schema editor built into the browser user interface and use a mapping language to setup the business objects. An example of the language is shown below in an extract of the schema for the Human business object. As you can see there are mapping as well as formatting and other tags. This information can be built manually or using a wizard which generates the base structure for you to alter. This is all stored as meta data when saved. Once a Business object is built it can be used as basis for code, other business objects (we support inheritance), called by a screen (called a UI Map) or even as a Web Service. This is just a start with Configurable Objects as you can also create views of base services called Business Services, Service Scripts used for non-object or complex object processing (as well as other things), UI Maps used for screens and Data Areas to reuse definitions across multiple objects. Configurable Objects are powerful and I only really touched on them here. Over the next few months I hope to add lots more entries about them.

    Read the article

  • To Serve Man?

    - by Dave Convery
    Since the announcement of Windows 8 and its 'Metro' interface, the .NET community has wondered if the skills they've spent so long developing might be swept aside,in favour of HTML5 and JavaScript. Mercifully, that only seems to be true of SilverLight (as Simon Cooper points out), but it did leave me thinking how easy it is to impose a technology upon people without directly serving their needs. Case in point: QR codes. Once, probably, benign in purpose, they seem to have become a marketer's tool for determining when someone has engaged with an advert in the real world, with the same certainty as is possible online. Nobody really wants to use QR codes - it's far too much hassle. But advertisers want that data - they want to know that someone actually read their billboard / poster / cereal box, and so this flawed technology is suddenly everywhere, providing little to no value to the people who are actually meant to use it. What about 3D cinema? Profits from the film industry have been steadily increasing throughout the period that digital piracy and mass sharing has been possible, yet the industry cinema chains have forced 3D films upon a broadly uninterested audience, as a way of providing more purpose to going to a cinema, rather than watching it at home. Despite advances in digital projection, 3D cinema is scarcely more immersive to us than were William Castle's hoary old tricks of skeletons on wires and buzzing chairs were to our grandparents. iTunes - originally just a piece of software that catalogued and ripped music for you, but which is now multi-purpose bloatware; a massive, system-hogging behemoth. If it was being built for the people that used it, it would have been split into three or more separate pieces of software long ago. But as bloatware, it serves Apple primarily rather than us, stuffed with Music, Video, Various stores and phone / iPad management all bolted into one. Why? It's because, that way, you're more likely to bump into something you want to buy. You can't even buy a new laptop without finding that a significant chunk of your hard drive has been sold to 'select partners' - advertisers, suppliers of virus-busting software, and endless bloatware-flogging pop-ups that make using a new laptop without reformatting the hard drive like stepping back in time. The product you want is not the one you paid for. This is without even looking at services like Facebook and Klout, who provide a notional service with the intention of slurping up as much data about you as possible (in Klout's case, whether you create an account with them or not). What technologies do you find annoying or intrusive, and who benefits from keeping them around?

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • Using ext4 in VMware machine

    First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

    Read the article

  • How can story and gameplay be artfully merged?

    - by NauticalMile
    Let me give some context. Three of my friends and I have a pretty good game idea cooking. It's based off of a prototype I made that's evolving into a cool game mechanic. The mechanic itself is a toy that's fun on its own, but we haven't designed any puzzles around it yet. We have a design document going, and we are answering a lot of questions about what's in the game. It's become clear early on that everyone (including myself) likes the characters and the story a lot. Considering what our favorite games are, this is unsurprising. A story driven game makes sense to me. I like the emphasis that Paper Mario: The Thousand-Year-Door, Portal 2, and Tomb Raider place on story, and I imagine our game will have a similar feel (lots of dialogue, plot twists, lovable characters). However, one team member raised this point in the design doc: I am feeling like [fleshing out the story] is our biggest hurdle right now for making more design decisions - like more specific decisions about levels etc. Is this true? I am uncertain about working on the story extensively before gameplay, and my uneasiness was reinforced when I read this question about story vs. gameplay. What I want to say is: "Let's continue to work on the story, but also start brainstorming and prototyping abstract puzzles and combat sequences, and we'll creatively match them together later." Is this a reasonable approach? If so, how much of the development of these elements should be done independently? Should I try and create a whole bunch of puzzles while my other teammates focus on story and aesthetics? Then when we have a lot of story and game 'chunks' we can match them with eachother to build something meaningful. Or should we focus on iterating individual levels as distinct units where puzzles, story, etc... are designed together? Or maybe we need to put our excitement about the story on hold and just focus on gameplay. Is there another approach to design that we can take? Am I missing something crucial? I have discussed story and gameplay because they seem the most likely to be at odds with each other, but we also have to consider user interface, music, art direction, etc... Can we design these independently as well?

    Read the article

  • Unit Testing TSQL

    - by Grant Fritchey
    I went through a period of time where I spent a lot of effort figuring out how to set up unit tests for TSQL. It wasn't easy. There are a few tools out there that help, but mostly it involves lots of programming. well, not as much as before. Thanks to the latest Down Tools Week at Red Gate a new utility has been built and released into the wild, SQL Test. Like a lot of the new tools coming out of Red Gate these days, this one is directly integrated into SSMS, which means you're working where you're comfortable and where you already have lots of tools at your disposal. After the install, when you launch SSMS and get connected, you're prompted to install the tSQLt example database. Go for it. It's a quick way to see how the tool works. I'd suggest using it. It' gives you a quick leg up. The concepts are pretty straight forward. There are a series of CLR commands that you use to configure a test and the test assertions. In between you're calling TSQL, either calls to your structure, queries, or stored procedures. They already have the one things that I always found wanting in database tests, a way to compare tables of results. I also like the ability to create a dummy copy of tables for the tests. It lets you control structures and behaviors so that the tests are more focused. One of the issues I always ran into with the other testing tools is that setting up the tests might require potentially destructive changes to the structure of the database (dropping FKs, etc.) which added lots of time and effort to setting up the tests, making testing more difficult, and therefor, less useful. Functionally, this is pretty similar to the Visual Studio tests and TSQLUnit tests that I used to use. The primary improvement over the Visual Studio tests is that I'm working in SSMS instead of Visual Studio. The primary improvement over TSQLUnit is the SQL Test interface it self. A lot of the functionality is the same, but having a sweet little tool to manage & run the tests from makes a huge difference. Oh, and don't worry. You can still run these tests directly from TSQL too, so automation has not gone away. I'm still thinking about how I'd use this in a dev environment where I also had source control to fret. That might be another blog post right there. I'm just getting started with SQL Test, so this is the first of several blog posts & videos. Watch this space. Try the tool.

    Read the article

  • What type of interview questions should you ask for "legacy" programmers?

    - by Marcus Swope
    We have recently been receiving lots of applicants for our open developer positions from people who I like to refer to as "legacy" programmers. I don't like the term "old" because it seems a little prejudiced (especially to HR!) and it doesn't accurately reflect what I mean. We are a company that does primarily .NET development using TDD in an Agile environment, we use Git as a source control system, we make heavy use of OSS tools and projects and we contribute to them as well, we have a strong bias towards adhering to strong Object-Oriented principles, SOLID, etc, etc, etc... Now, the normal list of questions that we ask doesn't really seem to apply to applicants that are fresh out of school, nor does it seem to apply to these "legacy" programmers. Here is how I (loosely) define a "legacy" programmer. Spent a significant amount of their career working almost exclusively with Assembly/Machine Languages. Primary accomplishments include work done with TANDEM systems. Has extensive experience with technologies like FoxPro and ColdFusion It's not that we somehow think that what we do is "better" than what they do, on the contrary, we respect these types of applicants and we are scared that we may be missing a good candidate. It is just very difficult to get a good read on someone who is essentially speaking a different language than you. To someone like this, it seems a little strange to ask a question like: What is the difference between an abstract class and an interface? Because, I would think that they would almost never know the answer or even what I'm talking about. However, I don't want to eliminate someone who could be a very good candidate in their own right and could be able to eventually learn the stuff that we do. But, I also don't want to just ask a bunch of behavioral questions, because I want to know about their technical background as well. Am I being too naive? Should "legacy" programmers like this already know about things like TDD, source control strategies, and best practices for object-oriented programming? If not, what questions should we ask to get a good representation about whether or not they are still able to learn them and be able to keep up in our fast-paced environment? EDIT: I'm not concerned with whether or not applicants that meet these criteria are in general capable or incapable, as I have already stated that I believe that they can be 100% capable. I am more interested in figuring out how to evaluate their talents, as I am having a hard time figuring out how to determine if they are an A+ "legacy" programmer or if they are a D- "legacy" programmer. I've worked with both.

    Read the article

  • Access Services in SharePoint Server 2010

    - by Wayne
    Another SharePoint Server 2010 feature which cannot go unnoticed is the Access Services. Access Services is a service in SharePoint Server 2010 that allows administrators to view, edit, and configure a Microsoft access application within a Web Browser. Access Services settings support backup and recovery, regardless of whether there is a UI setting in Central Administration. However, backup and recovery only apply to service-level and administrative-level settings; end-user content from the Access application is not backed up as part of this process. Access Services has Windows PowerShell functionality that can be used to provide the service that uses settings from a previous backup; configure and manage macro and query setting; manage and configure session management; and configure all the global settings of the service. Key Benefits of SharePoint Server Access Services Easier Access to right tools: The enhanced, customizable Ribbon in Access 2010 makes it easy to uncover more commands so you can focus on the end product. The new Microsoft Office BackstageTM view is yet another feature that can help you easily analyze and document your database, share, publish, and customize your Access 2010 experience, all from one convenient location. Helps build database effortlessly and quickly: Out-of-the box templates and reusable components make Access Services the fastest, simplest database solution available. It helps find new pre-built templates which you can start using without customization or select templates created by your peers in the Access online community and customize them to meet your needs. It builds your databases with new modular components. New Application Parts enable you to add a set of common Access components, such as a table and form for task management, to your database in a few simple clicks. Database navigation is now simplified. It creates Navigation Forms and makes your frequently used forms and reports more accessible without writing any code or logic. Create Impactful forms and reports: Whether it's an inventory of your assets or customer sales database, Access 2010 brings the innovative tools you'd expect from Microsoft Office. Access Services easily spot trends and add emphasis to your data. It quickly create coordinating database forms and reports and bring the Web into your database. Obtain a centralized landing pad for your data: Access 2010 offers easy ways to bring your data together and help increase work quality. New technologies help break down barriers so you can share and work together on your databases, making you or your team more efficient and productive. Add automation and complex expressions: If you need a more robust database design, such as preventing record deletion if a specific condition is met or if you need to create calculations to forecast your budget, Access 2010 empowers you to be your own developer. The enhanced Expression Builder greatly simplifies your expression building experience with IntelliSense®. With the revamped Macro Designer, it's now even easier for you to add basic logic to your database. New Data Macros allow you to attach logic to your data, centralizing the logic on the table, not the objects that update your data. Key features of Access Services 2010 - Access database content through a Web browser: Newly added Access Services on Microsoft SharePoint Server 2010 enables you to make your databases available on the Web with new Web databases. Users without an Access client can open Web forms and reports via a browser and changes are automatically synchronized. - Simplify how you access the features you need: The Ribbon, improved in Access 2010, helps you access commands even more quickly by enabling you to customize or create your own tabs. The new Microsoft Office Backstage view replaces the traditional File menu to provide one central, organized location for all of your document management tasks. - Codeless navigation: Use professional looking web-like navigation forms to make frequently used forms and reports more accessible without writing any code or logic. - Easily reuse Access items in other databases: Use Application Parts to add pre-built Access components for common tasks to your database in a few simple clicks. You can also package common database components, such as data entry forms and reports for task management, and reuse them across your organization or other databases. - Simplified formatting: By using Office themes you can create coordinating professional forms and reports across your database. Simply select a familiar and great looking Office theme, or design your own, and apply it to your database. Newly created Access objects will automatically match your chosen theme.

    Read the article

  • Is there a language or design pattern that allows the *removal* of object behavior or properties in a class hierarchy?

    - by Sebastien Diot
    A well-know shortcoming of traditional class hierarchies is that they are bad when it comes to model the real world. As an example, trying to represent animals species with classes. There are actually several problems when doing that, but one that I never saw a solution to is when a sub-class "looses" a behavior or properties that was defined in a super-class, like a penguin not being able to fly (there are probably better examples, but that's the first one that comes to my mind, having seen "Madagascar 2" recently). On the one hand, you don't want to define for every property and behavior some flag that specifies if it is at all present, and check it every time before accessing that behavior or property. You would just like to say that birds can fly, simply and clearly, in the Bird class. But then it would be nice if one could define "exceptions" afterward, without having to use some horrible hacks everywhere. This often happens when a system has been productive for a while. You suddenly find an "exception" that doesn't fit in the original design at all, and you don't want to change a large portion of your code to accommodate it. So, is there some language or design patterns that can cleanly handle this problem, without requiring major changes to the "super-class", and all the code that uses it? Even if a solution only handle a specific case, several solutions might together form a complete strategy. [EDIT] Forgot about the Liskov Substitution Principle. That is why you can't do it. Assuming you define "traits/interfaces" for all major "feature groups", you can freely implement traits in different branches of the hierarchy, like the Flying trait could be implemented by Birds, and some special kind of squirrels and fish. So my question could amount to "How could I un-implement a trait?" If your super-class is a Java Serializable, you have to be one too, even if there is no way for you to serialize your state, for example if you contained a "Socket". So one way to do it is to always define all your traits in pair from the start: Flying and NotFlying (which would throw UnsupportedOperationExceiption, if not checked against). The Not-trait would not define any new interface, and could be simply checked for. Sounds like a "cheap" solution, in particular if used from the start.

    Read the article

  • WebLogic Partner Community Newsletter June 2013

    - by JuergenKress
    Dear WebLogic Partner Community member, This month newsletter contains tons of Java material with the availability of Java EE7! Including many articles in the May/June Java Magazine and the Duke Award nomination! Thanks for all your efforts to become certified and Specialized. For all the experts who achieved the WebLogic Server 12c Certified Implementation Specialist  or ADF 11g Certified Implementation Specialist you can download a logo for your blog or business card at the Competence Center. For all the companies who achieved a WebLogic and ADF Specialization you can request a nice plaque for your office. Summer time is training time – make sure you attend our Fusion Middleware Summer Camps or one of our upcoming Exalogic Implementation Workshop by PTS in Spain, Turkey and Middle East. For those who can not make it we offers plenty of online courses like the New ADF Academy. Or the webcast The value of Engineered Systems for SAP. At our WebLogic Community Workspace (WebLogic Community membership required) you can find Engineered Systems Strategy presentation. Thanks to the community for all the WebLogic best practice papers and tools like Automated provision of Oracle Weblogic Server Platform & Frank’s Coherence videos on YouTube & Create and deploy applications on the Oracle Java Cloud & WebLogic Application redeployment using shared libraries - without downtime & Oracle Traffic Director. The first tests deployments for WebLogic on Oracle Database Appliance are on the way, thanks to all who are their experience: Sizing & Configuration and Traffic Director. Virtualised Oracle Database Appliance Proof of Concept - #1 Planning from Simon Haslam. Would be great if you can also share your experience via twitter @wlscommunity! In the ADF section of the newsletter you find Tuning Application Module Pools and Connection Pools & List View - Cool Looking ADF PS6 Component for Collections & Insider Essential & User Interface & Skinning & Oracle Forms to ADF Modernization reference. Great summer time! Jürgen Kress Oracle WebLogic Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/WebLogicnewsJune2013 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • SharePoint 2010 Hosting :: Sending SMS Alerts in SharePoint 2010 Over Office Mobile Service Protocol (OMS)

    - by mbridge
    In this post, I want to share the exciting news of SharePoint's 2010 new feature. Finally it's possible to send SMS directly from SharePoint to mobile phones. The advantages of sending SMS instead of Email messages are obvious: SMS alerts or reminders that are received on mobile phones are more preferred than Email messages that can be lost in the mass of spam. The interface is standard as it's very similar to previous versions of the product. Adjustments are easy to do, simply enter the address of the Office Mobile Service (OMS) web-service which you want to use for sending messages, then specify the connection parameters. Further details on Office Mobile Service is available below. The Test Service button checks if OMS web-service is accessible using provided URL (user name and password are not verified). This check is needed because OMS web-service URL depends on the mobile operator and country. It's now possible to select the method of sending alerts in alerts settings. Email option is selected by default. Alerts delivery method is displayed in the list of existing alerts. Office Mobile Service (OMS) SharePoint 2010 uses exterior servers similar to SMTP servers for sending SMS alerts. However, Microsoft started development and promotion of their own protocol instead of using existing ones. That is how Office Mobile Service (OMS) appeared. This open protocol enables clients to send text and multimedia messages (mobile messages) remotely to the server which processes these messages and delivers them to mobile phones.  Typical scenario of utilizing this protocol is data transfer between computer application and mobile phone. The recipient can answer messages and the server in return will deliver the answer by SMTP protocol, i.e. by email.  Key quality of this protocol is that it's built on base of HTPP(S) and SOAP protocols.     This means that in fact SMS gateway must support typified web-service. What do you get from web-service? What you get is the ability to send SMS from any platform you want.  The protocol is being developed at the moment and version 0.2 from 08/28/2009 was available when the article was published.  For promotion of their protocol and simplifying server search, Microsoft represented web-service http://messaging.office.microsoft.com/HostingProviders.aspx that helps to receive the list of providers, which supports OMS protocol and message delivery to your operator.  All you need to do is decide which provider to use, complete the agreement, then adjust the SharePoint connection parameters and start working.  Some providers advertise themselves not only for clients but for mobile operators as well. They offer automatic adding to the list of the Office Mobile Service Providers.  To view the full specifications of OMS, please go to http://msdn.microsoft.com/en-us/library/dd774103.aspx.

    Read the article

  • Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

    - by Anega
    Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

    Read the article

  • ArchBeat Link-o-Rama for November 8, 2012

    - by Bob Rhubart
    Webcast: Meeting Customer Expectations in the New Age of Retail Keep your eye on this live webcast as Sanjeev Sharma (Principal Product Director, Oracle Exalogic), Kelly Goetsch (Senior Principal Product Manager, Oracle Commerce), and Dan Conway (Senior Product Manager, Oracle Retail) offer real-world examples of business value derived by running customer-facing applications on Oracle Engineered Systems. Live, Thursday Nov 8, 10am PT/ 1pm ET. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger SOA Still Not Dead: Ratification of Governance Standard Highlights SOA’s Continued Relevance So just about the time I dig into Google Trends to learn that the conversation about governance peaked in 2004, along comes all this InfoQ article by Richard Seroter. And of course you've already listened to the OTN Archbeat Podcast about governance, right? Right? Implications of Java 6 End of Public Updates for Oracle E-Business Suite Users | Steven Chan The short version is: "Nothing will change for EBS users after February 2013." According to Steven Chan, "EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6." You'll find additional information on Steven's blog. ADF Mobile Custom Javascript – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Thought for the Day "(When) asking skilled architects…what they do when confronted with highly complex problems…(they) would most likely answer, 'Just use Common Sense.' (A) better expression than 'common sense' is 'contextual sense' — a knowledge of what is reasonable within a given content. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

    Read the article

  • Wifi disabled for Intel Centrino Wireless-N 1000 Intel in 12.04

    - by new_bie
    Laptop model - HP- dm4 - 2070. I had faced the same problem for wireless being disabled in case of 11.10. It had to do with the new kernel. I thought with 12.04 this problem will be handled but the problem persists. Is there no way to get the wireless working except for the way mentioned in the following link ?? Wifi for Centrino Wireless-N 1000 Intel Corporation (HP pavillion dm4 - 2070us) is not working Output for sudo lshw -class network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress cap_list configuration: latency=0 resources: memory:c2500000-c2501fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: c0 serial: 2c:41:38:07:f3:e3 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.116 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:c1400000-c143ffff ioport:2000(size=128) Output for dmesg | grep iwl [ 14.742886] iwlwifi 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.742897] iwlwifi 0000:01:00.0: setting latency timer to 64 [ 14.743013] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000 [ 14.743016] iwlwifi 0000:01:00.0: pci_resource_base = ffffc90000c78000 [ 14.743018] iwlwifi 0000:01:00.0: HW Revision ID = 0x0 [ 14.743119] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X [ 14.743161] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 14.743229] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 14.765147] iwlwifi 0000:01:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 14.765151] iwlwifi 0000:01:00.0: Device SKU: 0X50 [ 14.765154] iwlwifi 0000:01:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 14.765907] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 14.912840] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-5.ucode' failed. [ 14.914254] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-4.ucode' failed. [ 14.915718] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-3.ucode' failed. [ 14.916986] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-2.ucode' failed. [ 14.919391] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-1.ucode' failed. [ 14.919445] iwlwifi 0000:01:00.0: no suitable firmware found! [ 14.919783] iwlwifi 0000:01:00.0: PCI INT A disabled [ 2868.960807] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_idt rfcomm bnep bluetooth parport_pc ppdev binfmt_misc hid_logitech_dj usbhid hid joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq hp_wmi sparse_keymap hp_accel lis3lv02d input_polldev snd_timer snd_seq_device wmi iwlwifi snd mac80211 i915 cfg80211 rts_pstor(C) drm_kms_helper drm uvcvideo videodev psmouse soundcore mei(C) v4l2_compat_ioctl32 mac_hid serio_raw snd_page_alloc i2c_algo_bit video lp parport atl1c

    Read the article

  • New Feature in ODI 11.1.1.6: Enterprise Data Quality Integration

    - by Julien Testut
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Data Integrator 11.1.1.6.0 introduces a new Open Tool called EnterpriseDataQuality which allows ODI users to invoke an Oracle Enterprise Data Quality Job from a Package. This post will give you an overview of this new feature. Oracle Enterprise Data Quality (OEDQ) provides organizations with an integrated suite of data quality tools that offer an end-to-end solution to measure, improve, and manage the quality of data from any domain, including customer and product data. The addition of the EnterpriseDataQuality Open Tool extends the inline Data Quality capabilities of Oracle Data Integrator with Oracle Enterprise Data Quality powerful data profiling, cleansing, matching, and monitoring capabilities. The EnterpriseDataQuality Open Tool can invoke any OEDQ Job stored in a Project. This Open Tool connects to an OEDQ server using a JMX (Java Management Extensions) interface. Once installed, this Open Tool will be found under Plugins in the Package Toolbox area: This EnterpriseDataQuality Open Tool takes a couple of parameters as inputs such as the Enterprise Data Quality Job and Project names, the OEDQ hostname and JMX port etc. With the EnterpriseDataQuality Open Tool, ODI customers can now incorporate their Oracle Enterprise Data Quality processes within their Data Integration workflows. You will find instructions about how to use the Enterprise Data Quality Open Tool in the Oracle Data Integrator documentation at: Using the EnterpriseDataQuality Open Tool.You can find an overview of all the new features introduced in ODI 11.1.1.6 in the following document: ODI 11.1.1.6 New Features Overview.

    Read the article

  • Play a Webpage Display Prank in Google Chrome

    - by Asian Angel
    Are you looking for a fun but innocent prank to play on someone who loves using Google Chrome? If so then you may want to have a closer look at the Upside Down extension for Chrome. Before Here is our example webpage before starting the prank…looking all “normal like”. Upside Down in Action As soon as the extension has been installed you are ready to go. If you had a webpage open before installing the extension you will only need to refresh the page. As soon as the page has been refreshed or a new one is opened everything is going to look messed up very quickly. With the default setting there are five different “looks” available. To cycle through the five “looks” use the “Windows Key + Semicolon” or “Command + Semicolon” to toggle through them. On the sixth toggle the webpage will revert to normal (toggling afterwards starts the whole process again). Here are the five “looks” available…         Options There are options available for the extension where you can focus on just a specific effect or a group of effects. You can also enable a “Grayscale Effect” and even set a delay timer (a definite “evil touch”)! Think of the fun and surprised looks that await… Conclusion If you have been looking for a fun and unexpected prank for your favorite Google Chrome fan then this just might be what you have been looking for. Get ready to sit back and watch the fun. Links Download the Upside Down extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Take Screenshots of Any Webpage in Google ChromeHow to Make Google Chrome Your Default BrowserSubscribe to RSS Feeds in Chrome with a Single ClickActivate the Redesigned New-Tab Interface in Google ChromeFriday Fun: Play MineSweeper in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If Web Browsers Were Modes of Transportation Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows

    Read the article

  • Spotlight on RIVA: CRM integration for Oracle CRM on Demand and Microsoft Exchange

    - by Richard Lefebvre
    Introducing Riva from Omni - an Oracle ISV partner specializing in Enterprise Management and Integration Solutions Riva delivers advanced, server-side integration for Oracle CRM On Demand and Microsoft Exchange or even Novell GroupWise. Riva allows Oracle customers to go beyond the standard Outlook plug-in to deliver additional value for the end user as they interact between Outlook and CRM On Demand. Riva syncs CRM On Demand to ALL Exchange mail apps, not just Windows Outlook.  So, whether customers are using Outlook 2010, Outlook Web Access (web client), Outlook 2011 for Mac, Apple Mail, Outlook on Citrix  or a mobile device, Riva's got them covered. There are no plug-ins to be installed, configured, managed and maintained on users' desktops, laptops as Riva delivers Server-side synchronisation for CRMOD and Exchange. The automation of CRM and Outlook integration will remove the reliance upon users to synchronise between the two with Riva handling this process. Riva allows administrators to define sync policies and apply them to individuals or groups of users depending on their sync requirements. Administrators will be able to determine and manage the exposure of the most pertinent detail to be synchronised between Outlook and CRM On Demand. Custom and organic contact filtering for large deployments i.e. Based on ownership, groupings and contact frequency, filters can be applied on what contact records are shared with the users. Riva provides the capability to synchronise CRM and Outlook beyond Contacts, Calendar entries and Email. The synchronisation can be extended to cater for  opportunities, quotes and custom objects for example within the Outlook interface. Riva SmartConvert Folders can automate the creation of opportunities and associated contacts for example if they don't already exist. This can facilitate a reduction in manual detail entry through quick association whilst also benefiting user adoption. From a mobile perspective, Riva allows users to view and manage their CRM On Demand contacts, calendar, tasks, opportunities and cases from iPad, iPhone, Android and BlackBerry devices.  Again, there are no mobile apps or additional plugins to install, configure or manage. We sync CRM On Demand to Exchange.  Because the mobile device is connected to an Exchange mailbox, the information automatically syncs down to the native address book, calendar and mail apps on the smartphone or tablet. Riva Datasheet for CRM On Demand Riva Brochure – Oracle CRM On Demand  Technical Knowledgebase & Riva Trial  http://kb.omni-ts.com/47/ Comparison to Outlook Plug-ins Riva Diagram – Riva Comparison with Outlook Plug-ins Contact: Wolfgang Berger - [email protected]

    Read the article

  • WPF Control Toolkits Comparison for LOB Apps

    In preparation for a new WPF project Ive been researching options for WPF Control toolkits.  While we want a lot of the benefits of WPF, the application is a fairly typical line of business application (LOB).  So were not focused on things like media and animations, but instead a simple, solid, intuitive, and modern user interface that allows for well architected separation of business logic and presentation layers. While WPF is mature, it hasnt lived the long life that Winforms has yet, so there is still a lot of room for third party and community control toolkits to fill the gaps between the controls that ship with the Framework.  There are two such gaps I was concerned about.  As this is an LOB app, we have needs for presenting lots of data and not surprisingly much of it is in grid format with the need for high performance, grouping, inline editing, aggregation, printing and exporting and things that weve been doing with LOB apps for a long time.  In addition we want a dashboard style for the UI in which the user can rearrange and shrink and grow tiles that house the content and functionality.  From a cost perspective, building these types of well performing controls from scratch doesnt make sense.  So I evaluated what you get from the .NET Framework along with a few different options for control toolkits.  I tried to be fairly thorough, but know that this isnt a detailed benchmarking comparison or intense evaluation.  Its just meant to be a feature set comparison to be used when thinking about building an LOB app in WPF.  I tried to list important feature differences and notes based on my experience with the trial versions and what I found in documentation and reference materials and samples.  Ive also listed the importance of the controls based on how I think they are needed in LOB apps.  There are several toolkits available, but given I dont have unlimited time, I picked just a few.  Maybe Ill add on more later.  The toolkits I compared are: Teleriks RadControls for WPF since I had heard some good things about Telerik Infragistics NetAdvantage WPF since both I and the customer have some experience with the vendors tools WPF Toolkit on codeplex since many of my colleagues have used it Blacklight codeplex project which had WPF support for the Tile View control  (with Release 4.3 WPF is not going to be supported in favor of focusing only on SilverLight controls, so I dropped that from the comparison) Click Here to Download the WPF Control Toolkits Comparison Hopefully this helps someone out there.  Feel free to post a comment on your experiences or if you think something I listed is incorrect or missing.  Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >