Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 445/494 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Random Computer Crashes

  - by Josh W.

  Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

  Read the article

• WiFi signal is lost every 3 minutes

  - by Software Monkey

  For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

  Read the article

• Any way to recover ext4 filesystems from a deleted LVM logical volume?

  - by Vegar Nilsen

  The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

  Read the article

• Keep source IP after NAT

  - by John Miller

  Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

  Read the article

• GPU not powering on

  - by Lerp

  So I got home from work yesterday and went to turn my computer on as per usual to be greeted by this: The screens remained black, so I rebooted; I go as far as GRUB before my screens went black again. I rebooted again, they didn't turn on. I rebooted again, I got as far as the windows login screen. This time I unplugged it, opened it up and cleaned it but to no luck. The GPU was still being tempermental. I repeated the process of turning off and on several times until one time it work as normal. I happily played games for the rest of the night (5-6 hours?) thinking everything was jolly good now. Well I get home from work today and it is doing the SAME thing. Sometimes everything displays normally for a few seconds to minutes then the screens go black; then sometimes the screens don't come on at all. Summary and additional points Screens sometimes turn on before shortly turning off, sometimes they don't; I cannot seem to determine any pattern between when they do or do not turn off. The build has been working fine for about 8 months now so I know it's not hardware incompatibility. If I plug a monitor into the on board graphics I can use the PC normally (just in low graphics mode) I have two monitors and it's a case of they both turn on or not. So I think I can rule out the monitors being dead. I have tried replacing the GPU I have tried replacing the RAM I have tried flashing the CMOS I have tried cleaning the inside The GPU is a Radeon HD 7870 My questions Is my GPU dead? It's not very old and I would rather have a method of being certain it's the GPU before I fork out some money I can't really afford. I do not have a second PC here to test it in. If my GPU is dead why does it sometimes work and sometimes not? Update Okay, it was working again.. at least I thought it was. I left it running for 10-20minutes with the screens black. Turned it off and straight back on and it worked for all of 10minutes. I was then updating the post in joy thinking I could play some games for the rest of the night when BAM it went black again. So yeah, I don't know :C

  Read the article

• My network drive disappears from Mac OS Finder

  - by Mariusz

  I have recently bought a Netgear WNDR3800 router to use it in my home network. But just the same day I installed it, I noticed a strange behaviour of Finder and iTunes. Let me explain it further. There is a Synology DS111 NAS attached to that router and two Macs with Mac OS X Lion. One of them is connected by a cable and the second one wirelessly. Before I changed my router to the new one I mentioned above, Finder always used to display my NAS on its sidebar. So I could just click its network name to access shared folders existing on it. But after I installed WNDR3800, I can no longer access the NAS that way. It is no longer displayed. I always have to mount it manually by typing its IP address using the Finder's 'connect to server' option. The same NAS supports TimeMachine backups and has an inbuilt DLNA server. And the same situation here. I can't perform a backup because my NAS is no longer accessible in TimeMachine preferences. iTunes does not display it as well (as a multimedia server) even though it used to before I installed that router. What's important, everything works fine for a couple of minutes after I restart the router or the NAS. Or even when I change the NAS's IP address it becomes accessible again in Finder, TimeMachine and iTunes, but only for some time. Both the Mac computers I mentioned behave the same way. And all those issues have been taking place sice I installed that new router. Before I did that, everything had worked fine. My old router was Netgear WGR614v10. Would you be so kind to tell me what you think could possibly be the reason of that behaviour? What settings of the router should I look closer at? I'm not a network specialist, but is it possible that some network packets are blocked for some reason? I will be grateful for any clues you give me. Thank you.

  Read the article

• Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

  - by Abner

  Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

  Read the article

• How to create NTFS partition in Linux to install Windows 7 from USB?

  - by Michal Stefanow

  I messed up with my computer and need help. Generally: install Windows 7 from USB. Problem: "setup was unable to create a new system partition" When first attempt to install Windows 7 failed I tried Linux live USB, installed distro to HDD, and erased all the existing partitions. Current state (fdisk -l): [writing from other computer so no copy and paste] /dev/sda1 305GB Linux /dev/sda2 7GB Extended /dev/sda5 7GB Linux Swam / Solaris To create a new, NTFS partition: fdisk /dev/sda n (for new) p (for primary) 3 (for partintion number) "No free sectors available" All the HDD was formatted couple of minutes before so there is a lot of free space but how to resize a parition? I cannot find an option for resizing in man fdisk. Some people say I should use gparted but my distro doesn't not contain this package. And my distro doesn't support wireless drivers so I have serious problems with downloading stuff. I tried also using cfdisk but any command results in: "cfdisk bad primary partition 1 partition ends in the final partial cylinder" I tried also removing partition 1 and then creating a new one (so there is no "no free sectors"). I'm receiving a warning: "Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot." After restating: "grub rescue, no known filesystem" It may indicate that some changes have been made BUT when running Windows 7 installed some another error: "Windows cannot be installed to Disk 0 Partition 1" More detailed: "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS." So formatting drive using Windows 7 installer BUT this time yet another error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" Apparently I cannot access logs (how?) and I am back to drawing board with my live USB (this time showing partition as HPFS/NTFS). Any suggestions how to install Windows 7? Should I reinstall Linux to HDD, erase existing partitions once again, and use Parted rather than gparted (parted is included in the distro). Or maybe should I create another bootable USB such as PartedMagic to painlessly create partitions? I just want to install Windows 7 from USB, my laptop is semi-operational and I am ready to receive some help regarding fdisk and creating NTFS partitions. UPDATE: I did as suggested (removed all the partitions) and tried to install in unallocated space. Tried to create a new partition and format it. Same error: "setup was unable to create a new system partition" Came to the conclusion it may have something to do with TrueCrypt I have recently installed. Right now trying to FIX MBR (as I haven't got possibility to create rescue disc without optical drive)

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• Unable to boot from LiveCD/USB and even Super Grub Disk!

  - by Reuben L.

  Hi all, I'm in a fix. Basically this morning, I decided to format my Win7 as it was getting really slow and I did so with no problems. I also have a Linux Mint OS on dual boot. Since I was springcleaning my windows partition, I decided it was a good idea to do the same to my linux partition. I downloaded the latest version of Linux Mint (Julia) and burned the LiveCD. Now here is where the problem lies, when I restarted Windows and chose to boot from the LiveCD, it didn't work. No joke. There was just a little underscore blinking for a long time before it went back to GRUB which prompted me to select an OS to boot. However, when I went into my old Linux Mint OS and restarted the machine, the LiveCD worked... to a certain extent. It would load and look as though it was ready to install Linux Mint 10 but the moment it got to the option screen, the whole screen turned into a checkered and jumbled mess. At this point I thought it was the LiveCD or the .iso file. I had an Ubuntu LiveUSB for recovery purposes and I tried that. The exact same thing happened. Can't boot the LiveUSB if I restarted from Windows, but works when I reboot from Linux. BUT still the same checkered screen that doesnt respond. Did a bit of googling and reckoned it might be something wrong with my GRUB. Did some updating and didnt make a difference. Then I tried the Super Grub Disk and STUPIDLY uninstalled GRUB. (Note that booting to SGD had the exact same problem - can't be done if I rebooted from Windows). Now I can't access my Linux Mint 9 cos the the bootup screen (mbr) only has Windows 7 as an option. Remember me mentioning that I can't boot from any CD/USB/recovery CD when I reboot from Windows? And now that I can't access Linux, there's no way for me to do any form of recovery! I've tried using the command prompt utility at startup recovery but to no avail. Anyone can help me with this?

  Read the article

• Can this USB3 behaviour be anything else than a hardware failure?

  - by Jonas Wielicki

  While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

  Read the article

• How to temporary disable a mirror video driver in windows xp registry

  - by happy clicker

  Because its a lot of text, I will ask first my question and then explain what the base problem is. Perhaps someone can give me a solution to the base problem: Is there is a way to temporary disable mirror video drivers (through registry or so), without uninstalling the corresponding software. I tested changing the enumeration in LocalMachine\Hardware\DeviceMap\Video but after reboot always the old configuration is restored. Explanation of the base problem We are working on a wpf-project for a department of a big company. There we have the problem that WPF renders only in software mode, although the hardware they have, must support hardware rendering (Tier 2). After searching for a solution to the problem, we found out that direct 3d does not work properly and we think thats why WPF can only use SW-rendering. In dxdiag.exe the direct3d-acceleration is enabled, but if we start the test-routine it always fails saying that it has not enough memory (it says memory, not video memory!). I have seen there 3 different types of pc’s (they have some hundreds of each type) and every type shows the exactly same behavior. We tried to update all the drivers, also dx (Version 9.0c) and we searched a lot in the web but could not find a solution. All the pcs have Intel Dual-Core processors or better, one type has an Intel gma 9000 graphics card the other two types have actual ATI and NVidia graphic-cards with 256MB onboard memory. Also the system memory is at least 2GB. Windows is XPSP3. The pc’s are of two different manufacturers. Because we see the exactly same behavior on every computer of this three very different computer-types, we don’t think that this is a driver or a direct x problem. What we’ve found in other newsgroups is, that direct x could be disturbed through mirror-video drivers such as NetMeeting, VNC and other remote desktop-installations. In the registry, we see under LocalMachine\Hardware\DeviceMap\Video a lot of such mirror-entries and we find also the definitions in the CurrentControlSet\Control\Video-Section (However this drivers are not shown in the hardware panel of the os). We can have admin-rights to one of these computers to test if disabling these drivers would help, but we must not change the configuration so that some software does not work after the tests. Therefore I cannot uninstall any software because I have not the mediums, licenses or knowhow to reinstall those apps. The support of this company however will only begin to work, if I can tell them what the real problem is. Thats why we search for a way to disable these mirror-drivers (or a hint to solve the dx problem if we are on a false trace)

  Read the article

• Windows Server 2003 Standard R2 CD 1 cannot boot: freeze at No Emulation

  - by TGP1994

  Hi everyone. I've been interested in the Windows Server line of OSes, so since I apply for DreamSpark, I thought I'd go download it and try it. I just so happened to have an old desktop that I was using awhile ago for Windows XP, so I imaged the drive in preparation for it to be overwritten with the new OS. (This system has an Asus A7V8X-X motherboard, an AMD Athlon XP 2800+ processor, and 1GB of RAM.) I tried burning the first disk image on my newer desktop computer, running Windows XP, although the CD burner consistently failed at a particular track area from cd to cd, so it seemed like the burner was toast there. Fortunately, I had a laptop, so I transferred the images over to that, then burned the first disc there. First time around went great, and the burning program reported no errors. I then took the CD over to the computer that I was intending to install Server onto, set the BIOS to boot from the CD drive, then I booted it up. Like normal, after the POST, it printed "Boot from ATAPI CD-Rom: No Emulation", which I was used to seeing with bootable cds. I waited for the "Press any key to continue..." message that I had become so familiar with in windows discs, although I saw none. The computer sat there for about 5 seconds with the cd spinning, then it spun down like it was done reading it. Nothing else happened. No response from the keyboard. I tried again, same result. I then downloaded IMGBurn, and I put the burned cd into the laptop that burned it originally. I also downloaded a fresh image from the dreamspark site. I ran a verify session, and everything checked out. I later tried getting various DOS startup discs, then I tried booting the winnt binary, which supposedly initiates the installation process. Either the shells reported that not enough memory was available (since they would be running in low memory mode), or FreeDOS in particular would report Illegal instructions right away. Is the image corrupt at dreamspark, or am I doing something wrong?

  Read the article

• Is there a Distributed SAN/Storage System out there?

  - by Joel Coel

  Like many other places, we ask our users not to save files to their local machines. Instead, we encourage that they be put on a file server so that others (with appropriate permissions) can use them and that the files are backed up properly. The result of this is that most users have large hard drives that are sitting mainly empty. It's 2010 now. Surely there is a system out there that lets you turn that empty space into a virtual SAN or document library? What I envision is a client program that is pushed out to users' PCs that coordinates with a central server. The server looks to users just like a normal file server, but instead of keeping entire file contents it merely keeps a record of where those files can be found among various user PCs. It then coordinates with the right clients to serve up file requests. The client software would be able to respond to such requests directly, as well as be smart enough to cache recent files locally. For redundancy the server could make sure files are copied to multiple PCs, perhaps allowing you to define groups in different locations so that an instance of the entire repository lives in each group to protect against a disaster in one building taking down everything else. Obviously you wouldn't point your database server here, but for simpler things I see several advantages: Files can often be transferred from a nearer machine. Disk space grows automatically as your company does. Should ultimately be cheaper, as you don't need to keep a separate set of disks I can see a few downsides as well: Occasional degradation of user pc performance, if the machine has to serve or accept a large file transfer during a busy period. Writes have to be propogated around the network several times (though I suspect this isn't really much of a problem, as reading happens in most places more than writing) Still need a way to send a complete copy of the data offsite occasionally, and this would make it very hard to do differentials Think of this like a cloud storage system that lives entirely within your corporate LAN and makes use of your existing user equipment. Our old main file server is due for retirement in about 2 years, and I'm looking into replacing it with a small SAN. I'm thinking something like this would be a better fit. As a school, we have a couple computer labs I can leave running that would be perfect for adding a little extra redundancy to the system. Unfortunately, the closest thing I can find is Dienst, and it's just a paper that dates back to 1994. Am I just using the wrong buzzwords in my searches, or does this really not exist? If not, is there a big downside that I'm missing?

  Read the article

• Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

  - by amn

  Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

  Read the article

• Windows 7 & Virtual PC and Internet (gateway) problems on host PC

  - by Mufasa

  I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

  Read the article

• ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

  - by GriffJ

  I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

  Read the article

• What are the most likely bottlenecks determining the performance of CamStudio screen recording?

  - by Steve314

  When doing screen recording, I can get a frame rate of maybe 15 frames per second for the full screen on my 1080p monitor using the XVID codec. I can increase the speed a bit by recording a region, changing screen modes, and tweaking other settings, but I'm curious what hardware upgrades might give me the biggest bang for my buck. My PC is budget, but modern... Athlon 2 X4 645 (3.1GHz, quad core, limited cache) processor. 4GB single channel DDR3 1066 RAM. ASRock motherboard with NVidia GeForce 7025/nForce 630a Chipset. ATI Radeon HD 5450 graphics card - 512MB on board, not configured to steal system RAM. I dual-boot Windows XP and Windows 7. For the moment, XP is my bigger performance concern as it's still my getting-things-done O/S as opposed to my browser-host O/S. My goal is to make a few programming-related tutorials. For a lot of that I don't need screen recording - I can make up some slides, record audio with the PC switched off, yada yada. When I do need screen recording, I'll mostly be recording Notepad++, Visual Studio or a command prompt. Occasionally, I may be recording some kind of graphics or diagram program and using my pre-Bamboo cheap Wacom tablet - I have the CS2 versions of Photoshop and Illustrator, but I'd much more likely be using Microsoft Paint. Basically, what I'll be recording won't be making huge demands on the machine - but recording a fair number of pixels (720p preferred) will be useful. What's particularly wierd - not so long ago I still had a five-year-old Pentium 4 based PC. And (with the same 1080p monitor) it could record at not far from the same frame rate. So clearly the performance issues are more subtle than just throw-money-at-it. My first guess would be that the main bottleneck is the bandwidth for transferring data to/from the graphics card. Is that likely to be correct? In support of that, see this [Radeon HD 5450 review][1] - the memory bandwidth is only 12.8 GB/s. If you can't get data out of graphics memory quickly, you can't transfer it back to the system memory quickly. Apparently, that's slower than some top-end cards in 2002.

  Read the article

• Exchange-Server Query

  - by Rudi Kershaw

  First, a little background. I've recently been taken on as a web and software developer for a small company, who has no other in-house IT support. They've been asking my opinion on lots of IT subjects that are quite far out of my comfort zone. I'm definitely not a network admin. Their IT consultancy contractor is pushing them to upgrade their dedicated exchange server, even though it seems like the one they currently have has a lot of life left in it and is running problem free. They say it's "coming to the natural end of it's life". They want to install a monster with a Xeon E5-2420, 32GB RAM, 2x 1TB HDDs, Windows Server 2012 and Microsoft Exchange 2010. They want to charge a small fortune for it. Basically, this system seems massively over the top seeing as it won't be doing anything else other than running as an exchange server for a company with less than 25 email accounts. My employers also have a file server system in-house that hosts three web apps, an SQL server, their local domain, print server and shared folders. That machine is using the same specs as the proposed new one, and it is barely using any of it's potential. I asked if Microsoft Exchange 2010 could be installed on their file server, but they said that MS Exchange can't run on the same system as an SQL server because for some reason they will eat up each others resources (even though the SQL server isn't touching 1% of the current system's CPU or RAM). My question is really, are they trying to rip my employers off? Could MS Exchange be installed on their other server (on a virtual instance or not), or does the old one even need replacing at all? Going with their current suggestion will cost the company in excess of £6k, and it seems entirely unnecessary. I apologies, because I know this is probably a little thin on details, but if I carry on I could end up writing a massive essay that no-one will want to read. I've been doing my research, but I'm not knowledgeable enough make any hard decisions. Let me know if you need any more details. Thank you for any help you can offer. Further Details: The new exchange would need to support Outlook Web App, 25 users, a few public mailboxes, and email exchange with Blackberries.

  Read the article

• joining text files with 600M+ lines

  - by dnkb

  I have two files huge.txt and small.txt. Huge has around 600M rows and it's 14Gigs, each line has four space separated words (tokens) and finally another space separated column with a number. Small has 150K rows with a size of ~3M, a space separated word and a number. Both Files are sorted using the sort command, with no extra options. The words in both files may include apostrophes (') and dashes (-). The deisred output would contain all columns from the huge.txt and the second column (the number) from small txt where the first word of huge.txt and the first word of small.txt match. My attemtpts below failed miserably with the following error: cat huge.txt|join -o 1.1 1.2 1.3 1.4 2.2 - small.txt > output.txt join: memory exhausted What I suspect is that the sorting order isn't right somehow even though the files are pre-sorted using: sort -k1 huge.unsorted.txt > huge.txt sort -k1 small.unsorted.txt > small.txt Problems seem to appear around words that have apostrophes (') or dashes (-). I also tried dictinoary sorting using the -d option bumping into the same error at the end. I see two ways out of this but don't know how to implement any of them. 1) Any tips how to sort the files in a way that the join command considers them to be sorted properly? 2) I was thinking of calculating MD5 or some other hashes of the strings to get rid of the apostrophes and dashes, and do the sorting and joining with the hashes instead of the strings themselves an dat the "translate" back the hashes to strings, but leave the numbers intact at the end of the lines. Since there would be only 150K hashes it's not that bad. What would be a good way to calculate individual hashes for each of the strings? Some AWK magic? See file samples at the end. Thank you! sample of huge.txt had stirred me to 46 had stirred my corruption 57 had stirred old emotions 55 had stirred something in 69 had stirred something within 40 sample of small.txt caley 114881 calf 2757974 calfed 137861 calfee 71143 calflora 154624 calfskin 148347 calgary 9416465 calgon's 94846

  Read the article

• All internet requests in Windows time out

  - by Brandon

  So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

  Read the article

• Enterprise IPv6 Migration - End of proxypac ? Start of Point-to-Point ? +10K users

  - by Yohann

  Let's start with a diagram : We can see a "typical" IPv4 company network with : An Internet acces through a proxy An "Others companys" access through an dedicated proxy A direct access to local resources All computers have a proxy.pac file that indicates which proxy to use or whether to connect directly. Computers have access to just a local DNS (no name resolution for google.com for example.) By the way ... The company does not respect the RFC1918 internally and uses public addresses! (historical reason). The use of internet proxy explicitly makes it possible to not to have problem. What if we would migrate to IPv6? Step 1 : IPv6 internet access Internet access in IPv6 is easy. Indeed, just connect the proxy in Internet IPv4 and IPv6. There is nothing to do in internal network : Step 2 : IPv6 AND IPv4 in internal network And why not full IPv6 network directly? Because there is always the old servers that are not compatible IPv6 .. Option 1 : Same architecture as in IPv4 with a proxy pac This is probably the easiest solution. But is this the best? I think the transition to IPv6 is an opportunity not to bother with this proxy pac! Option 2 : New architecture with transparent proxy, whithout proxypac, recursive DNS Oh yes! In this new architecture, we have: Explicit Internet Proxy becomes a Transparent Internet Proxy Local DNS becomes a Normal Recursive DNS + authorative for local domains No proxypac Explicit Company Proxy becomes a Transparent Company Proxy Routing Internal Routers reditect IP of appx.ext.example.com to Company Proxy. The default gateway is the Transparent Internet proxy. Questions What do you think of this architecture IPv6? This architecture will reveal the IP addresses of our internal network but it is protected by firewalls. Is this a real big problem? Should we keep the explicit use of a proxy? -How would you make for this migration scenario? -And you, how do you do in your company? Thanks! Feel free to edit my post to make it better.

  Read the article

• arp "who-has tell" on cloned machine

  - by mcmorry

  I have a urgent problem to solve today, but I'm lost. Please help. I've cloned a Virtual Machine hosted on VM Ware ESXi 4.1 The OS is now Ubuntu Server 12.04 LTS, but at the time of cloning it was 10.04 LTS. I fixed the MAC address manually inside /etc/udev/rules.d/70-persistent-net.rules. It is a known problem on Ubuntu. I had to remove the old MAC address and set the new one as eth0. Everything seems to work fine, except ARP. My provider OVH sent me a warning to resolve it today (this is the second day) or they will block my IP! The log contains many lines like this: Tue Jun 5 01:04:29 2012 : arp who-has 178.32.136.212 tell 178.32.136.224 where .224 is the cloned server that is causing problems, and .212 is the cloned one. arp -na returns: ? (178.33.230.254) at 00:07:b4:00:00:02 [ether] on eth0 ? (178.32.136.212) at 00:50:56:09:8e:f1 [ether] on eth0 The first IP is the ESXi machine. The second one should not be there. I'm not an expert and I don't know what else to do to fix this problem. Any help will be very appreciated. Thanks. EDIT: ifcofig on .224: eth0 Link encap:Ethernet HWaddr 00:50:56:01:32:c6 inet addr:178.32.136.224 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe01:32c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:399924 errors:0 dropped:465 overruns:0 frame:0 TX packets:241884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58006071 (58.0 MB) TX bytes:663603166 (663.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:516216 errors:0 dropped:0 overruns:0 frame:0 TX packets:516216 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:236284275 (236.2 MB) TX bytes:236284275 (236.2 MB) ifconfig on .212: eth0 Link encap:Ethernet HWaddr 00:50:56:09:8e:f1 inet addr:178.32.136.212 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe09:8ef1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16014 errors:0 dropped:0 overruns:0 frame:0 TX packets:14511 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15134444 (15.1 MB) TX bytes:2683025 (2.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9944 errors:0 dropped:0 overruns:0 frame:0 TX packets:9944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1139347 (1.1 MB) TX bytes:1139347 (1.1 MB)

  Read the article

• Model M Keyboard inputs incorrect characters after logging in to Fedora

  - by mickburkejnr

  I recently bought a 24 year old IBM Model M keyboard. From what I gather, it'd been left on a shelf for the last 5 years, so you can imagine the amount of dust dirt and crap that was on it. Before cleaning it, I plugged it in to my laptop (running Fedora 17) using a PS/2 to USB adapter. What I found was, while it still works, the keys I press don't correspond to what is displayed on the screen. So for example, when I type S on the keyboard, I get ß display on the screen instead. At the time, I put this down to the adapter not working properly. Since then, I stripped the keys off the keyboard and cleaned the whole thing. It looks like it's just come out of a box! I then plugged it in to my computer (also running Fedora 17) via a standard PS/2 plug. The computer loaded up to the login screen, and I typed in my password. Pressed enter, and I logged straight in to my machine. At this point, I opened up a text editor and started typing some stuff. To my horror, the keystrokes I was entering weren't coming up as intended. What came up instead were characters that would map to the pressed key but only under a different keyboard language setting. I opened up a program to see what keyboard language had been selected, and the correct one for the keyboard was selected (which is UK in my case). I opened up a window that would show what characters mapped to what keys, and I pressed every single key on the keyboard, and every corresponding block representing each key lit up. I went back to the text editor to try again, but I was still getting these random characters. Whats more is that the backspace key would not work, although in the other utility it would flash when pressed. What I know is that at the login screen the keyboard must have entered the correct characters, otherwise I wouldn't have been able to log in. Further more, keys that don't respond while using a text editor as sending signals to the computer, as illustrated in that keyboard utility. The question is why random characters are displayed when they really shouldn't be? Would this be a hardware fault or a software issue?

  Read the article

• D-Link DIR-300 slows down / loses network

  - by basic6

  there are 2 buildings (A and B). In bldg A is an open WLAN (which I'm allowed to use btw). In bldg B is a computer that I want to connect to that network. So I flashed an old D-Link DIR-300 AP with DD-WRT, mounted it to the wall (bldg B) near a window, attached a 13 dBi directional antenna (pointing to bldg A) and configured it as AP client in that wireless network. Then there's another AP, connected to the D-Link AP, acting as standard access point, which the computer is connected to. That's basically working so far, but: Every now and then the connection is lost. Not the connection between the computer and the D-Link (I can access the DD-WRT admin page normally) or the connection between the D-Link and the WLAN (in Status - Wireless it says it's still connected to the network), but when I want to access a web page (which only works if I'm connected to the wireless network from bldg A), my Firefox keeps "Looking for" (name resolution) without finding anything. When I reset the D-Link (power off, power on) in this situation, after some moments, everything's working fine again (Internet access). I've no idea why this is happening, but usually it's at most every few weeks (most times when nobody was using the computer, so no traffic). Compared to the connection speed when I connect directly to the WLAN in bldg A (Laptop), the speed in bldg B is rather slow, but I have the impression that this difference is worse in the last few days. A few minutes ago, I got 582 KB/s down and 911 KB/s up in bldg A (directly/laptop) and 84 KB/s down and 9 KB/s up in bldg B. The speed in bldg B used to be way higher (I remember 200 KB/s up) while the actual network speed in bldg A was lower than it is now (close to those 200). I'm aware that the wireless connection between those buildings should slow things down, but I'm wondering why this difference has become that extreme. Thanks for any tips... Update: I currently want to upload a large file (1.5 GB) via FTP (FileZilla). Since that caused the D-Link to disconnect (as described in first post), I took my laptop to bldg A, connected directly to the original WLAN (bypassing my D-Link) and tried the same upload. Guess what - same issue: At some point the connection is dead (at this point I would have reset my D-Link if I was connected to it). Just as the D-Link, my laptop is still connected, but not even name resolution is working ("Looking for..." in Firefox). After reconnecting, it's working again. Maybe my D-Link isn't the problem at all...

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >