Search Results

Search found 15925 results on 637 pages for 'os walk'.

Page 446/637 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• How to change fonts in Kod?

  - by the_great_monkey

  I started using this new text editor called Kod (runs on Mac OS 10.6): http://kodapp.com/ It's very very fast, I'm a poor programmer and I don't have money to pay for TextMate, this might be the closest to TextMate that I've used. (TextMate cost around $50). The problem is.... Where is the preferences window? Where can I set the font size? I need to make it bigger, that's it... Does anyone know how to do that? EDIT: I think they haven't implement them yet... From their discussion in google group.

  Read the article

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• FreeBSD after motherboard replacement; should I have any concerns?

  - by cc

  So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

  Read the article

• Machine only responds to network requests from machines it is pinging

  - by ILikeFood

  I have two machines. WOPR: Ubuntu server edition 10.10 LTS 32 bit Adam Selene: Windows 7 home premium 64 bit / Ubuntu Desktop 10.10 LTS 64 bit I want to be able to SSH from Adam Selene to WOPR, so I connect them to the same network. Here's where things get weird. I cannot connect to WOPR in any way under normal circumstances. But, if WOPR is pinging Adam, then it starts responding to ping requests, HTTP gets, and SSH tunnels. I'm an amateur, and brand new to Ubuntu server, so I suspect there's a misconfiguration somewhere, but there's an off chance it's a bug in the OS. Does anyone know what might cause this behavior? Thanks a lot!

  Read the article

• How to completely remove MySQL from Windows?

  - by Nathan Long

  (I realize there are similarly-titled questions, but this one is really 'how do I reset the password', and this one doesn't specify an OS and has only gotten Linux-oriented answers.) On Windows XP, I just uninstalled MySQL and deleted the folder that it was installed in. I then rebooted and reinstalled MySQL. When it comes back up, it still has the databases it had before the uninstall. Where did it keep that database info? How do I completely remove MySQL and start over, as if I'd never installed it?

  Read the article

• User reduced LVM logical volume without resizing filesystem

  - by Matthew

  I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

  Read the article

• Installing linux mint in one partition

  - by sha404

  So, I have a disk with a MBR setup(image below). I've managed to have 50 GB unallocated space for intalling Linux Mint 14. And I want to keep the current windows OS too(but don't want the Mint inside windows). Now I've seen in some tutorials that Linux Mint needs several partitions for bootloader, swap, & home. I don't like to have so many partitions & maybe MBR stuff won't let me create more than one now. So, is it possible to install Linux Mint in one partition only? If it is really impossible than what's the minimum number? & how can I accomplish that? Thanks in advance.

  Read the article

• Unable to install ubuntu on a AMD 64 bit system with a AMD Radeon HD 6670 graphics card

  - by Tom Wingrove

  I’ve been running a dual boot system (Ubuntu/Windows7) for two years or so with no problems. I recently built an AMD 64 Bit System, re-installed Windows but when I went to load Ubuntu inside Windows, hit a snag. The screen view during installation became small square blocks of colour, which obviously is a graphics drive problem. I tried various live disks both 32 & 64 bit for, Ubuntu 12.04, 11.10 & 10.10, all but Ubuntu 10.10 had the same problem. Ubuntu 10.10 loaded ok, installed the presented ATI graphics driver as usual but was left with the AMD Unsupported watermark at the bottom right of the screen. The graphics card installed in the computer is an MSI ATI Radeon HD 6670 (in effect an AMD Radeon HD 6670). I am fairly new to linux and while I can install and tweak the OS, I am rather baffled as to what to do. So my question is will an up to date ATI Driver be released in the near future for installation/live disks? Or am I going to have to downgrade my graphics card to use linux? Yours Tom Wingrove

  Read the article

• Full screen not available in vmplayer 6 (on Linux)

  - by Simon

  I recently updated vmware player from 5.0.2 to 6.0.0, and now the "full screen" menu item is always grayed out. It happens with all my VMs, regardless of the guest OS. "Enter Unity" is still available for some reason. When I edit a VM to start up in full screen it works, but once I leave full screen I can't go back, which is really annoying. I've no clue where to start looking for the cause. I'm seeing this on Ubuntu 13.04 and OpenSUSE 12.3.

  Read the article

• Why is Ubuntu One slow to sync in 11.10, either backup or any sub-folder contents?

  - by pst007x

  I have been trying to sync my documents folder of 1.4GB, it still hasn't worked and it has been syncing for a month. The top level syncs, files and folders in the Document folders, but contents of sub-folders just hang. (Gave up and stopped syncing this folder) However,I have tried using the backup facility in 11.10, to backup to Ubuntu One.... I upgraded my HDD space in Ubuntu One. It has been going now for 24hours-ish and only backed up what looks like a couple of percent. (By the way what an excellent idea to backup to Ubuntu One, if only we could get it to actually work! :-o) The odd thing is I can sync to drop box within hours, rather than months. This is bad, and has been an issue since Ubuntu One's release. I have reported this problem and there were promises in later releases this would be fixed, but it hasn't. Canonical cannot help either... I posted on several blogs, a lot of people have the same problem but no fixes. So do I use dropbox or another service, until it is sorted, as Ubuntu does not seem to see this as an issue, I think a fix will be a long time in coming. (However,I love the potential of Ubuntu One and the integration with the OS) Yes my internet speeds are fine, etc... :-) No firewall (sudo ufw status: STATUS: INACTIVE), No Proxy, etc NB: I have raised this as a separate question to others posted here, because my question relates to Ubuntu 11.10, though I have commented elsewhere for help. Plus my question also relates to deja-dup backup to Ubuntu One. Thanks

  Read the article

• Getting error code -41 when copying files to external drive

  - by diego

  I'm having trouble copying some files from my mac to an external hard drive: I keep getting the nondescript "error code -41". I noticed some of the files with an additional "@" permission bit had the "com.apple.quarantine" flag set. I used the "xattr" command from this article What should I do about com.apple.quarantine? to take care of the quarantine flag and sort that out (these files were copied over from another mac on my network, so I guess OS X flagged them as quarantine). That took care of the problem for those files but I still have some that I can't manually copy over to the external drive. The only other thing I've noticed is that some of these files have a an extra permission bit: "drwxr-xr-x+" which I haven't been successful in googling. Aside from that I don't see anything else. Also, Disk Utility says everything's fine. Any help would be greatly appreciated.

  Read the article

• Unable to diagnose Windows 7 lockup

  - by Delyan

  Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

  Read the article

• Creating a file server - How can I use a large VHD file in Hyper-V? (700GB)

  - by barfoon

  Hey everyone, After a few discussions (here, here, and here), I am still unable to create a simple VM that will be used as a fileserver hosted on my Hyper-V box. I have created a fixed 700GB SCSI drive (.vhd file), as I have learned an IDE drive of this size is not possible. Not to sound too cynical, but its blown me away at how much trouble its been to create a large amount of space and start using it. What is the best way to create a fileserver with a drive of this size hosted on Hyper-V Server 2008, and how can I get it going??? Inclusion of OS, driver, integration tools etc, anything you feel is required would be greatly appreciated. Extra information I am using the stand-alone version of Hyper-V server, and not Windows Server 2008. I have tried loading the Linux Integration Tools (linked in the comments of the last link above) onto a SUSE 11 VM and the installation fails, the machine cannot see the vhd at all. Thanks very much,

  Read the article

• Error loading operating system WinXP Pro

  - by Jakesan

  So im getting the error "Error loading operating system" when the computer tries to boot to a fresh install of WinXP Pro. To get to this point, I: Shrunk the only partition with Gparted to 33GB Copied the partition to the end of the 200GB drive Enlarged the first one to fill the space Formatted the first partition to NTFS Set the first partition to boot, tagged the latter to hidden, removed boot flag This was done all under Hiren's BootCD. Now this is where it goes down the drain. I installed XP Pro SP1a from its CD, and chose to quick format the partition. Now after the OS was installed, I can't start XP without using the default menu action from Hiren's BootCD. All I am greeted with is the "error loading operating system" message. I tried to use the XP recovery to fixboot, fixmbr and bootcfg /rebuild (dont remember if the command was like this, anyway the 3 suggested commands). This did nothing. What am I missing here?

  Read the article

• Cannot boot from Yumi multiboot USB stick

  - by Amator

  I've just created a multiboot USB stick using Yumi. I tried to start my notebook (Asus K70IO) using it, but all I see is just a black screen with blinking underscore even after waiting for minutes. If during this time I remove the USB stick I get the message: "Operating system load error". How do I properly load my Yumi USB stick and use it? I've tried formatting it using Yumi's checkbox to format the stick in FAT32 too, but it didn't help. Now I tried to use Sardu 2.0.5 and met same problem: black screen and blinkin underscore, if I remove stick I see "Operating system load error" and my OS starts to boot. At the same time if I create bootable USB stick from ISO using UltraISO it boots smoothly.

  Read the article

• Why isn't this smbmount attempt working?

  - by Max Williams

  I can successfully access one of our local samba shares, which is on a windows pc (called marina) as follows: $ sudo /usr/bin/smbclient \\\\marina\\resource_library <my password> Domain=[MARINA] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] smb: \> So, that works. I'm now trying to mount the above location (the resource_library folder on marina) to /mnt/resource_library (as a read only folder), but it keeps failing - i've tried a few variations of specifying the location: $ sudo smbmount \\\\marina\\resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and $ sudo smbmount //marina/resource_library /mnt/resource_library -o username=max,password=<my password>,r mount error: could not resolve address for marina: No address associated with hostname No ip address specified and hostname not found and both of the above with MARINA instead of marina. It's bound to be some dumb mistake i'm making, can anyone see it? cheers, max

  Read the article

• Why am I seeing excessive disk activity when installing applications?

  - by Kev

  I'm running Windows 7 Ultimate 64 bit on a Dell Vostro 1720 with 8GB of RAM, 7200RPM Disk, 2.53 GHz Core2Duo (Windows 7 64 bit is a supported option and the laptop came with the OS pre-installed). I'm noticing some fairly excessive disk activity when running installers. For example the Visual Studio 2010 RC installer constantly accessed the disk for ~10 minutes. It was so excessive that I was unable to use the machine until this ceased. Today I installed Trillian Astra 4.1 for Windows (latest build from the website). Again when I ran the installer I was pretty much locked out of the machine until the disk activity calmed down. In both cases when I eventually managed to launch task manager I could see that the CPU was sitting at around 5% to 7% utilisation whilst this was going on. All other disk related activity is fine, the machine is snappy and applications launch without delay. It's just when I run an installer I see this odd behaviour. Why would this be?

  Read the article

• How can I get nvidia-96 installed?

  - by Bob

  I'm at my wits end here. This is my last effort before I go back to Windows. I need to get nvidia-96 proprietary driver installed. Synaptic won't install it because it says it has dependencies. I installed every single dependency it listed except for "xorg-video-abi-10" which does not show up as an item that can be installed. I have no idea what to do. Using 11.10 with a NVIDIA Geforce 3 GPU. Anyone know how to get this dang driver installed? @fossfreedom: the opensource driver is extremely slow. So slow that the OS is unusable—words appear seconds after I type them—programs take forever to perform actions. Also it is causing my monitor to turn on and off for no reason. @yossile: synaptic shows that I have xserver-xorg-core installed. And xserver-xorg-core-udeb does not show up as something that can be installed. @papseddy: when I try to install the downloaded nvidia driver it says it won't work until I disable Nouveau kernel driver. I have tried everything to get this dang Nouveau kernel driver disabled. Nothing has been successful.

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• What hash should be used to ensure file integrity?

  - by Corey Ogburn

  It's no secret that large files offered up for download often are coupled with their MD5 or SHA-1 hash so that after you download you can verify the file's integrity. Are these still the best algorithms to use for this? Obviously these are very popular hashes that potential downloaders would have easy access to. Ignoring that factor, what hashes have the best properties for being used for this? For example, bcrypt would be horrible for this. It's designed to be slow. That would suck to use on your 7.4 GB dual layer OS ISO you just downloaded when a 12 letter password might take up to a second with the right parameters.

  Read the article

• Multiple servers using same nameservers

  - by Robsimm

  I have 2x servers with the following OS's and Control Panels: Windows Server 2003 running Plesk 9 Centos 5.3 running WHM/cPanel The Windows server 2003 server is hosting the two nameservers: ns1.domain.com ns2.domain.com I have BIND running on the Centos 5.3 server, but I wish for my customers to use the same nameservers ns1.domain.com and ns2.domain.com (as per the Windows Server 2003 server). My first question is - is this possible? And if so, how would I go about configuring both servers to enable such a configuration? Thanks very much.

  Read the article

• Ubuntu how to FTP transfer files to folder /var/www?

  - by jc.yin

  I'm new to linux and I've set up a web server with Ubuntu Desktop edition so I can practice with the GUI a bit before transitioning to Ubuntu Server. I've already set up a LAMP stack as well as FTP. Now I just need to know how to transfer my web files to the /var/www folder in Ubuntu. Previously I've worked on Mac OS and there's a central server for all the web files where I can FTP to. Now after I've managed to connect via FTP to the Ubuntu server, I see all the folders such as Desktop, Downloads, Documents etc but no web folder. Anyone able to help me understand how do I FTP to the /var/www folder in Ubuntu? Thanks

  Read the article

• UBUNTU.. GRUB problem

  - by pravinp

  Hi, I have/(had) windows xp on one partition of my hdd. on second i installed ubuntu 9.10 yesterday. and after reboot of windows xp i get error "GRUB LOADING.". now i know that you can play around with that using live GRUB and all. putting GRUB on top of MBR or etc etc. something like that. i want to know - if i reinstall Ubuntu 10.04 which is available now - will it give me still the same error? or i will be able to use both OS? (i.e. is that problem solved in version 10.04 or still there? and if it is solved reinstallation of ubuntu will solve the problem or not?) anyhelp is welcome. Thanks

  Read the article

• JDK8 New Build Infrastructure

  - by kto

  I unintentionally posted this before I verified everything, so once I have verified it all works, I'll updated this post. But this is what should work... Most Interesting Builder in the World: "I don't always build the jdk, but when I do, I prefer The New JDK8 Build Infrastructure. Stay built, my friends." So the new Build Infrastructure changes have been integrated into the jdk8/build forest along side the older Makefiles (newer in makefiles/ and older ones in make/). The default is still the older makefiles. Instructions can be found in the Build-Infra Project User Guide. The Build-Infra project's goal is to create the fastest build possible and correct many of the build issues we have been carrying around for years. I cannot take credit for much of this work, and wish to recognize the people who do so much work on this (and will probably still do more), see the New Build Infrastructure Changeset for a list of these talented and hard working JDK engineers. A big "THANK YOU" from me. Of course, every OS and system is different, and the focus has been on Linux X64 to start, Ubuntu 11.10 X64 in particular. So there are at least a base set of system packages you need. On Ubuntu 11.10 X64, you should run the following after getting into a root permissions situation (e.g. have run "sudo bash"): apt-get install aptitude aptitude update aptitude install mercurial openjdk-7-jdk rpm ssh expect tcsh csh ksh gawk g++ build-essential lesstif2-dev Then get the jdk8/build sources: hg clone http://hg.openjdk.java.net/jdk8/build jdk8-build cd jdk8-build sh ./get_source.sh Then do your build: cd common/makefiles bash ../autoconf/configure make We still have lots to do, but this is a tremendous start. -kto

  Read the article

• How can I uninstall a clustered SQL instance if the cluster has been destroyed?

  - by Bob

  First time going through this scenario, and apparently I did it very wrong. On the DB servers I deleted the cluster group that held SQL and Reporting Services. I then destroyed the cluster. Then I tried to uninstall SQL. No dice. SQL still thinks its part of the non-existant cluster and will not let me uninstall it. I went into the Maintenance menu of the SQL setup and tried to Remove Node...nope. Unless I find a way out of this I will have to rebuild the OS if I can't get SQL off the box.

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >