Search Results

Search found 13713 results on 549 pages for 'production environment'.

Page 446/549 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• sudo fdisk in a live session does not show all hard drives

  - by cornbread

  I am having Grub2 issues in my Ubuntu 10.04 dual boot, 2 hard drive system. So I am attempting to follow the standard grub2 reinstallation guide (cant post link because of spam filters allowing only one... ?_?) Don't know if this is the root of my problem, but my speedy internal HD with my OS on it is not showing up anywhere in a live session. Not in nautilus, behind fdisk.... no where. When I can get the main system to boot, there is no issue seeing all available partitions. But the live session sees only the 1TB internal media/backup hard drive. I need access to the other hard drive and it's partitions to finish the grub2 re-installation but I am not sure anymore that is the underlying issue. Anyone have experience with this? The issue I have identified as a grub2 issue is fully described here. SandPvvr describes it exactly. Some notes: I do not see the grub2 menu for my os's holding down the shift key after my bios screen works maybe 10% of the time Not related to reinstalling a windows os. havent been touched in a year do some web development. issue may have started when I was playing with ruby and django. not sure on this. Could a dev environment do this? fdisk in live session ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001d518 Device Boot Start End Blocks Id System /dev/sdb2 1 121601 976759939 5 Extended /dev/sdb5 487 110765 885816036 83 Linux /dev/sdb6 110766 121601 87040138+ b W95 FAT32 /dev/sdb7 1 486 3903700+ 82 Linux swap / Solaris Partition table entries are not in disk order

  Read the article

• Hotmail mail delivery issue (spam)

  - by chaochito

  Hello, I am running a Postfix server in a dedicated server in a Linux environment (centOS 5.3) for a social networking web application and are experiencing deliverability issues with Hotmail (I can send mails to Gmail, Yahoo, Aol in inbox). I only send legit mails for registered users (notifications). I have SPF, DK and DKIM setup. I pass the Sender ID test when mailing to [email protected] but we have "X-Auth-Result : None" only in Hotmail headers and no X-SID-Result:Pass. We have been enrolled in their program for more than 2 weeks and normally when you apply to their Sender ID program you are supposed to have X-SID-Result:Pass and X-Auth-Result:Pass. I contacted Hotmail about the issue and they told me that my domain looks like added to Sender ID in their system this is beyond their support and asked me to contact my ISP. As you can imagine, my ISP has no clue about that either. I don't really know what could be wrong... Mails are currently filtered as spam and we would like to be able to have them landing in inbox.

  Read the article

• Value of Itanium or Sparc over x86_64 for Oracle Deployment

  - by Antitribu

  We are looking at a new environment to run our Oracle Database running on SUSE (potentially migrating to RedHat). Our database is approximately 100GB and performs adequately on our current hardware (x86_64) with approximately 6GB of ram allocated to it. We are growing quickly however and will require more performance shortly. Given the cost of Oracle licenses we would like to maximize the value from each license by choosing the most appropriate CPU to run the software on. The questions are: Are there substantial benefits to looking at Itanium or Sparc hardware, are there any drawbacks? Is there a point where one starts to scale out better? What are the long term support options for Itanium? Given the dominance of x86 would it be safer long term to stick with x86? On average what would be the performance benefit of implementing an Oracle database on Itanium or Sparc over x86_64? Is this an issue at all or will other factors (IO/RAM) cap out first? If anyone can point me towards some solid documentation on comparisons between the platforms that provides good case analysis of when to choose which I'm more than happy to accept that as an answer. Edit:- Added Sparc as an Option as it was previously not considered however with the recent Oracle Sun aquisition seems very relevant.

  Read the article

• Windows 2003 DC to Windows 2008 R2 DC with same name and same IP

  - by TheCleaner

  Environment = Windows 2003 native domain with 8 DCs I've got an old domain controller that is running 2003, CA Enterprise role, DHCP, DNS, a few GPO scripts that point to shares on it, and some other minor functions. All our servers point to it as their primary DNS, and there's lots of references to its IP or name throughout the domain at this point (8+ years later). I really don't feel like manually changing all of this, it would be a pretty massive undertaking. I want to follow this guide: http://msmvps.com/blogs/acefekay/archive/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address.aspx to hopefully end up with basically an "in-place upgrade" so to say. I considered just doing a P2V of the box, but we don't really want to keep it around running 2003 to be honest. I also considered using a CNAME and adding a 2nd IP (the old one) but again, it seemed like it would be cleaner using the attached link. My actual question: Any gotchas or big caution signs when doing what the link suggests? Anyone gone down this road and have advice on how to proceed?

  Read the article

• Process PHP files from a network share in a vmware virtual machine

  - by nhinkle

  As a testing environment, I have set up a vmware virtual machine running Windows Server 2008 R2. I have Apache and PHP installed (as part of the xampp package). I am doing the development outside of the VM, and so want Apache to serve PHP files from a VM shared folder (which appears as a network share in the VM). I have done this by creating an NTFS symbolic link in Apache's htdocs directory. I can access this directory from the browser, and plain-text files are readable. However, PHP fails to process files, instead returning the following error: Warning: Unknown: failed to open stream: No such file or directory in Unknown on line 0 Fatal error: Unknown: Failed opening required 'C:/xampplite/htdocs/path/to/file.php' (include_path='.;C:\xampplite\php\PEAR') in Unknown on line 0 It appears to be a permissions issue — PHP doesn't seem to be allowed to read the file to process it. However, Apache has no problem opening files in the directory. I cannot figure out how to give PHP the necessary permissions to process the file. Does anybody know of a way to make this work, or else another solution for getting the files into the VM automatically while I develop on the host machine?

  Read the article

• Java Deployment and Configuration (1.6.0_21)

  - by user125137

  Sofware: Java Runtime Environment 1.6.0_21 OS: Windows XP Professional 32-Bit, SP3 Situation: a new piece of web based software is being deployed this week and prior to this all the company desktops need to be set up to meet the requirements of this software. One of these requirements is JRE 1.6.0_21. I have successfully scripted the removal of all other Java versions and the installation of the required version, however I cannot get it configured properly. One of the requirements is that the Java console be set to disabled - if it is not it can cause an issue with a particular function. I have pushed out a deployment.config and deployment.properties but the console just will not disable itself.. I know the config is being read correctly because the update tab is being correctly disabled and removed. deployment.config: deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties deployment.system.config.mandatory=true deployment.properties: #deployment.properties #Fri Jun 15 09:34:31 EST 2012 deployment.version=6.0 deployment.console.startup.mode=DISABLE deployment.javaws.autodownload=NEVER deployment.javaws.autodownload.locked= There is no change if I set the console to ENABLE either - it remains on the default of hidden. I'm sure I can disable the console with a registry change of some form but my preference is to have it done via the deployment files as it gives the option of centralising the properties file to a network share if we wish. If anyone has any suggestions it would be appreciated.

  Read the article

• SQL Server performance on VSphere 4.0

  - by Charles

  We are having a performance issue that we cannot explain with our VMWare environment and I am hoping someone here may be able to help. We have a web application that uses a databases backend. We have an SQL 2005 Cluster setup on Windows 2003 R2 between a physical node and a virtual node. Both physical servers are identical 2950's with 2x Xeaon x5460 Quad Core CPUs and 64GB of memory, 16GB allocated to the OS. We are utilizing an iSCSI San for all cluster disks. The problem is this, when utilizing the application under a repeated stress testing that adds CPUs to the cluster nodes, the Physical node scales from 1 pCPU to 8 pCPUs, meaning we see continued performance increases. When testing the node running Vsphere, we have the expected 12% performance hit for being virtual but we still scale from 1 vCPU to 4 vCPUs like the physical but beyond this performance drops off, by the time we get to 8 vCPUs we are seeing performance numbers worse than at 4 vCPUs. Again, both nodes are configured identically in terms of hardware, Guest OS, SQL Configurations etc and there is no traffic other than the testing on the system. There are no other VMs on the virtual server so there should be no competition for resources. We have contacted VMWare for help but they have not really been any suggesting things like setting SQL Processor Affinity which, while being helpful would have the same net effect on each box and should not change our results in the least. We have looked at all of VMWare's SQL Tuning guides with regards to VSphere with no benefit, please help!

  Read the article

• Printer spooler service stop running when sent print job

  - by Hanan N.

  Every time i am sending a print job to the printer, i am don't get any response from the printer, and at the printer job list at the status of the job, i see that there was an Error, but it don't give me any clue on what could be the problem. After some investigation i found that every time that i send the print job to the printer the printer spooler service stops to run, then after a second or two it start again (i think that this behavior is related to the printer spooler settings to rerun it self after it stops). Things that i have tried so far: Remove and Install again the Driver. After removing the driver, i have removed the unnecessary registry keys according to this article from Microsoft, these are: Rename all files and folders in: c:\windows\system32\spool\drivers\w32x86 Remove anything but Drivers Print and Processors: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x86 Remove anything in here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors but: BJ Language Monitor Local Port Microsoft Document Imaging Writer Monitor Microsoft Shared Fax Monitor Standard TCP/IP Port USB Monitor WSD Port Disconnect and Reconnect the Printer. Clean the computer from Viruses & Spywares. Currently i am stuck, i have no more things to try, if anybody know about any kind of solution please let me know about it. Since i am want to keep this post as general problem that relate to the printer spooler, and not just my particular problem, i didn't included inside the windows version & the printer model, they are (although i think that it isn't relate just for that particular model): Windows 7 32bit, HP Officejet 4500 G510g-m (connect to the computer via USB). Thanks.

  Read the article

• Varnish does not start properly (crashes after startup) with no error messages

  - by Matthew Savage

  I am running Varnish (2.0.4 from the Ubuntu unstable apt repository, though I have also used the standard repository) in a test environment (Virtual Machines) on Ubuntu 9.10, soon to be 10.04. When I have a working configuration and the server starts successfully it seems like everything is fine, however if, for whatever reason, I stop and then restart the varnish daemon it doesn't always startup properly, and there are no errors going into syslog or messages to indicate what might be wrong. If I run varnish in debug mode (-d) and issue start when prompted then 7 times out of time it will run, but occasionally it will just shut down 'silently'. My startup command is (the $1 allows for me to pass -d to the script this lives in): varnishd -a :80 $1 \ -T 127.0.0.1:6082 \ -s malloc,1GB \ -f /home/deploy/mysite.vcl \ -u deploy \ -g deploy \ -p obj_workspace=4096 \ -p sess_workspace=262144 \ -p listen_depth=2048 \ -p overflow_max=2000 \ -p ping_interval=2 \ -p log_hashstring=off \ -h classic,5000009 \ -p thread_pool_max=1000 \ -p lru_interval=60 \ -p esi_syntax=0x00000003 \ -p sess_timeout=10 \ -p thread_pools=1 \ -p thread_pool_min=100 \ -p shm_workspace=32768 \ -p thread_pool_add_delay=1 and the VCL looks like this: # nginx/passenger server, HTTP:81 backend default { .host = "127.0.0.1"; .port = "81"; } sub vcl_recv { # Don't cache the /useradmin or /admin path if (req.url ~ "^/(useradmin|admin|session|sessions|login|members|logout|forgot_password)") { pipe; } # If cache is 'regenerating' then allow for old cache to be served set req.grace = 2m; # Forward to cache lookup lookup; } # This should be obvious sub vcl_hit { deliver; } sub vcl_fetch { # See link #16, allow for old cache serving set obj.grace = 2m; if (req.url ~ "\.(png|gif|jpg|swf|css|js)$") { deliver; } remove obj.http.Set-Cookie; remove obj.http.Etag; set obj.http.Cache-Control = "no-cache"; set obj.ttl = 7d; deliver; } Any suggestions would be greatly appreciated, this is driving me absolutely crazy, especially because its such an inconsistent behaviour.

  Read the article

• Improve wireless performance

  - by djechelon

  Hello, I have a Trust Speedshare Turbo Pro router, which is running on channel 6. I found that the wireless signal (and network performance) dramatically drops from my PDA (I can barely attach to the network, even if I set the PDA's energy settings to maximum wireless performance) when I even exit my room, and I don't have shielded walls or something like that. I can't even stream a SD video from my desktop (connected via LAN) to my laptop using WiFi, while via LAN it works fine. I read that changing router's channel could improve performance due to interference reducing. I found that almost all wireless networks around here run on channels 6 and 11. I tried to go to my router's settings page to change channel, but I found that the combo box only allows me to select 6!! I'm not sure, but I may have been able in the past to change channel, though not to all of the available channels. A few minutes ago I tried a firmware upgrade, but it didn't solve my problem. My question is Is it possible that my router is someway locked to its channel? I bought it on my own, I didn't receive it from my ISP Apart from boosting the antenna power to the maximum (which, by the way, increases the EM radiation my and my family's bodies absorb 24/7 and is little more environment-unfriendly), do you have any tips on getting high quality transmission up to 5 metres from the antenna? Thank you

  Read the article

• Windows VirtualBox failed to attach USB device to Linux Guest

  - by joltmode

  I have Windows 7 64bit Host system, and I am using VirtualBox 4.1.18 (r78361). I have an Arch Linux Guest OS. I have installed VirtualBox Extension Pack (to enable USB2 support) and added my USB device filter to VM. I have also installed the Guest Additions provided by Arch: virtualbox-archlinux-additions (but I have no idea whether it's actually needed for my environment). I can see my USB device from VirtualBox Devices menu. Whenever I am trying to access it, I end up with: Failed to attach the USB device Kingston DT 100 G2 [0100] to the virtual machine Archlinux. USB device 'Kingston DT 100 G2' with UUID {a836ec33-0f41-4ca7-a31d-09cceaf5d173} is busy with a previous request. Please try again later. Details ? Result Code:    E_INVALIDARG (0x80070057) Component:      HostUSBDevice Interface:      IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee:         IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} From what I have googled, most guides shows how to solve this the other way around - Linux Host to Windows Guest. How do I resolve this? Update I have tried to Eject (virtually, not physically) the device from my Windows Host system and then try to access the Device from Guest. Same error.

  Read the article

• Joining new DC to AD - DNS name does not exist

  - by Andrew Connell

  I had a DC fail on me recently and trying to add a new one to my domain, although I'm sensing I might have other issues in my domain. I'm a dev at heart and know just enough about AD to be dangerous so looking for some assistance. My working DC is RIVERCITY-DC12. I'm trying to promote RIVERCITY-DC14 as a DC to the RIVERCITY domain, but when I run DCPROMO, at the NETWORK CREDENTIALS step where I point to the name of the domain (rivercity.local), I get "An AD DC for the domain rivercity.local cannot be contacted" and in the details see "The error was DNS name does not exist" Looking at RIVERCITY-DC12, I can see DNS is working, I've been able to query it from other machines in my domain, and no errors are reported in the DNS category within the Event Viewer. When I checked the FMSO roles, it shows RIVERCITY-DC12 is the machine for all listed roles. Not sure what I should do next or how to troubleshoot/investigate after searching around for a solution... ideas? Environment: Domain: rivercity (rivercity.local) Forest functional level: Windows 2000 (I'm more than happy to raise this) Windows Server 2008 All servers are Windows Server 2008 R2 SP1 (fully patched)

  Read the article

• Instructions to setup primary and only domain controller

  - by Robert Koritnik

  Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a hw network adapter to linksys and a virtual network adapter to DC DC machine has two network adapters: one to linksys (to be internet connected so it can be updated etc.) and one to host (my dev Win7 machine) Edit My development machine should access domain controller and logon using domain credentials. Development machine would access internet directly via Linksys router. My domain controller machine would only serve authentication (and if I'm able to configure it right) should also have Active Directory Federation Services in a workable condition. I hope this is a bit more clear now. At least a small bit.

  Read the article

• Trying to install datastax opscenter - Failed to load application: cannot import name _parse

  - by gansbrest

  I'm not familiar with python, maybe someone could explain what's going on here? ec2-user@prod-opscenter-01:~ % java -version java version "1.7.0_45" Java(TM) SE Runtime Environment (build 1.7.0_45-b18) Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode) ec2-user@prod-opscenter-01:~ % python -V Python 2.6.8 ec2-user@prod-opscenter-01:~ % openssl version OpenSSL 1.0.1e-fips 11 Feb 2013 And now the error ec2-user@prod-opscenter-01:~ % sudo /etc/init.d/opscenterd start Starting Cassandra cluster manager opscenterd Starting opscenterdUnhandled Error Traceback (most recent call last): File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/lib64/python2.6/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/lib64/python2.6/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/lib64/python2.6/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "bin/start_opscenter.py", line 1, in <module> from opscenterd import opscenterd_tap File "/usr/lib/python2.6/site-packages/opscenterd/opscenterd_tap.py", line 37, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/OpsCenterdService.py", line 13, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/ClusterServices.py", line 22, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/WebServer.py", line 40, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/Agents.py", line 18, in <module> exceptions.ImportError: cannot import name _parse Failed to load application: cannot import name _parse Maybe there are open source alternatives to monitoring cassandra I should look at? Thanks a lot

  Read the article

• No password is complex enough

  - by Blue Warrior NFB

  I have one user in my AD domain who seems to not be able to self-select a password. I may have another one, but they're on a different enough password-expiration schedule that I can't remember who it is right now. I can set a password via ADU&C just fine, but when he tries it via C-A-D he gets the "doesn't meet complexity" message. Figuring he was just doing something like 'pAssword32', I did some troubleshooting of my own and sure enough it doesn't want to take a password that way. He's one of our users that habitually uses a local account and then maps drives using his AD credentials so he doesn't get the your password will expire in 4 days, maybe you should change it prompts, so he's a frequent "my password expired, can you fix it" flyer. I don't want to keep having him set it via ADU&C over my shoulder every N days. I'm just fine setting temp passwords of 48 characters of keyboard-slamming and letting him change it something memorable. My environment is at the Windows 2008 R2 functional level, and I am using fine-grained password policies. In fact, I have two such policies: For normal users (minimum length, remembered passwords) For special utility accounts The password complexities I've tried match both policies for length and char-set selection. The permissions on the User object themselves look normal, SELF does indeed have the "Change Password" right. Is there some other place I should be looking for things that can affect this?

  Read the article

• How to effectively have less php-cgi processes running?

  - by João Pinto Jerónimo

  My server is a Linode 512, and on it I run a Wordpress MU with 3 websites (they don't get a lot of visitors) and a couple of NodeJS apps. I need to switch to Lighttpd because Apache 2 was using about 59% of the server's RAM, and now I have the php-cgi processes taking up about 43.6% of the server's RAM: most often 2 processes use 16.5% of the RAM each, 4 processes use 1.8% of the RAM each, and 4 more processes use 0,8% of the RAM, each How can I have less of these processes ? I'm almost sure they're not all needed for the trafic this server gets... I tried only allowing 2 children, but I still have those 10... This is my fastcgi.server section in lighttpd.conf. fastcgi.server = ( ".php" => ( "localhost" => ( "socket" => "/var/run/lighttpd/php-fastcgi.socket", "bin-path" => "/usr/bin/php-cgi", "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "4000" ) ) ) ) What else can I do to tune lighttpd to use less RAM ?

  Read the article

• Looking for suggestions for hosting Windows 2000 Server in the cloud / VPS / etc?

  - by JohnyD

  I have a Windows 2000 Server, currently virtualized in Hyper-V, that I would like to get running off-site as a backup (cloud, VPS, etc). You can't virtualize in EC2 and I'm fairly certain there are no Server 2000 AMI's floating about (correct me if I'm wrong!). If anyone has a recommendation on how I can get a virtualized Windows 2000 Server running in a secure, remote environment I would be grateful. As far as locations go I'd be interested in both North America as well as Australia and Europe. In a nutshell, we're ploughing our way out of a legacy codebase and this server is the last that remains of the legacy apps. However, it is still very much used by our clients. Everything is backed up each night (data, images, etc) to tape which is then taken offsite. However, in the event of a fire I would love to have a backup legacy server to point DNS records to. So while I am rebuilding from the ashes our services would already be available. It would save a lot of time and make my managers all the more happy (and that's what it's all about, riighhtt? :D) Thank you all for your suggestions. Please let me know if I've left out any important information. Additional info: - the legacy codebase does not function properly in Server 2003

  Read the article

• How to set umask globally?

  - by DevSolar

  I am using a private user group setup, i.e. a user foo's home directory is owned by foo:foo, not foo:users. For this to work, I need to set the umask to 002 globally. After a quick grep -RIi umask /etc/*, it seemed for a moment that modifying the UMASK entry in /etc/login.defs should do the trick. It does, too -- but only for console logins. If I log in to my desktop, and open a terminal there, I still get to see the default umask 022. Same goes for files created from apps started through the menu. Apparently, the display manager (or whatever X11 component responsible) does source some different setting than a console login does, and damned if I could tell which one it is. (I tried changing the setting in /etc/init.d/rc, and no, it did not help.) How / where do I set umask globally (and for all users), so that the X11 desktop environment gets the memo as well? (The system is Linux Mint / Ubuntu, in case that changes anything...)

  Read the article

• Where do vendors publish internal transfer rates of HDDs?

  - by red888

  So I've started to dig into storage fundamentals and found that in order to calculate the IOPS of a HDD you need to know the internal transfer rate of the drive (time it takes data to move from the platters to internal disk's cache). I went on newegg and even a few vendor sites and could not find this info published for any HDDs. Is it sometimes called something else? Take this link to a seagate HDD for instance. Nowhere do I see "internal transfer rate", but I do see something called "Sustained Data Rate OD"- is that the same thing? Just so you know where I'm getting this info (Book: "Information Storage and Management Storing, Managing..."): Consider an example with the following specifications provided for a disk: The average seek time is 5 ms in a random I/O environment; therefore, T = 5 ms. Disk rotation speed of 15,000 revolutions per minute or 250 revolutions per second — from which rotational latency (L) can be determined, which is one-half of the time taken for a full rotation or L = (0.5/250 rps expressed in ms). 40 MB/s internal data transfer rate, from which the internal transfer time (X) is derived based on the block size of the I/O — for example, an I/O with a block size of 32 KB; therefore X = 32 KB/40 MB. Consequently, the time taken by the I/O controller to serve an I/O of block size 32 KB is (TS) = 5 ms + (0.5/250) + 32 KB/40 MB = 7.8 ms. Therefore, the maximum number of I/Os serviced per second or IOPS is (1/TS) = 1/(7.8 × 10^-3) = 128 IOPS.

  Read the article

• Performance data collection for short-running, ephemeral servers

  - by ErikA

  We're building a medical image processing software stack, currently hosted on various AWS resources. As part of this application, we have a handful of long-running servers (database, load balancers, web application, etc.). Collecting performance data on those servers is quite simple - my go-to- recipe of Nagios (for monitoring/notifications) and Munin (for collection of performance data and displaying trends) will work just fine. However - as part of this application, we are constantly starting up and terminating compute instances on EC2. In typical usage, these compute instances start up, configure themselves, receive a job from a message queue, and then get to work processing that job, which takes anywhere from 15 minutes to over 8 hours. After job completion, these instances get terminated, never to be heard from again. What is a decent strategy for collecting performance data on these short-lived instances? I don't necessarily need monitoring on them - if they fail for whatever reason, our application will detect this and handle re-starting the job on another instance or raising the flag so an administrator can take a look at things. However, it still would be useful to collect information like CPU (user, idle, iowait, etc.), memory usage, network traffic, disk read/write data, etc. In our internal database, we track the instance ID of the machine that runs each job, and it would be quite helpful to be able to look up performance data for a specific instance ID for troubleshooting and profiling. Munin doesn't seem like a great candidate, as it requires maintaining a list of munin nodes in a text file - far from ideal for an environment with a high amount of churn, and for the short amount of time each node will be running, I'd rather keep the full-resolution data indefinitely than have RRD water down the data over time. In the end, my guess is that this will require a monitoring engine that: uses a database (MySQL, SQLite, etc.) for configuration and data storage exposes an API for adding/removing hosts and services Are there other things I should be thinking about when evaluating options? Perhaps I'm over-thinking this, though, and just ought to run sar at 1-minute intervals on these short-lived instances and collect the sar db files prior to termination.

  Read the article

• On Windows machines, what is the typical toolchain for remote maintenance?

  - by Hanno Fietz

  I need to deploy PHP and Python code and the appropriate environment (web server, db server) to remote Windows systems, and I don't know what toolchain would be the equivalent to ssh, scp, bash and the like. So, basically, what I need to be able to do is the following: access remote Windows with the appropriate privileges in a secure manner, like I routinely do with ssh (I don't even know whether that would be a text or graphic interface on Windows). remotely install software: Apache or IIS, MySQL or Postgres, Python or PHP copy files from remote (the application we're deploying) remotely configure the machine to run regular tasks (e. g. checking for updates to the application) automate tasks like downloading files from a designated place The main question is probably how I get onto the machine securely in the first place, and then the rest is general Windows admin knowledge, which probably is too broad a scope to fit into one question. I have years of experience with maintaining Linux boxes and I have used tools of varying sophistication on those, ranging from plain scping of PHP files to deployment of Java application containers and even full VMs with Vagrant. On Windows, I'm a complete noob, and I don't even know where to start. I have installed Apache, MySQL , PHP on a desktop machine maybe twice in my life, that's about it. Bonus points for things that work from a Linux machine at my end, but I could run a VM and do everything from there.

  Read the article

• Best Asp.net Hosting

  - by dotnetguts

  There are many asp.net web hosting companies which spends lot on advertisement and also gives you very cheaper rate, as low as $5, but when it comes to support they are simply hopeless. Everyone can you please pass your experience with your past hosting companies and suggest any good asp.net hosting company? Please consider following requirement factors 1) Asp.net 3.5 or 4.0 supported. 2) Url Rewriter support 3) GZip support (Dynamic through code) 4) Initial Setup support (If required) 5) SQL Server 2005 or 2008 6) Allow to access SQL Server DB using SQL Mgmt Studio 7) Environment supporting Backup and Restore of DB on my own, without involving tech support team 8) Full Text Search support 9) FTP support 10) I can able to send atleast 500 Emails daily. 11) 99.9% Up Time (No matter all web hosting say they have 99.9% Up Time, but its not true). 12) Alert Email to be sent when they do any maintenance or during downtime. 13) Hosting Price should be reasonable. Incase you feel i am missing something please add to the list. Can anyone suggest good webhosting company based on above factors?

  Read the article

• How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

  - by Maharshi Raval

      I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

  Read the article

• How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

  - by Maharshi Raval

      I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

  Read the article

• IIS not responding with SSL Server Hello

  - by Damien_The_Unbeliever

  I'm having difficulty getting a particular IIS machine to "do" SSL. This is a test environment (one of many) which we've set up "the same" as we have many times previously, but it just doesn't seem to be working. The server is Windows Server 2003 (Version 5.2 (Build 3790.srv03_sp2_gdr.100216-1301 : Service Pack 2)) IIS is hosting 4 sites (including the default site), but only one site is configured for SSL. We're using the same SSL certificate we use on all of our other servers (it's a wildcard cert). (Don't think this is relevant, but including anyway) We've configured the site to require SSL, it has a subdirectory that doesn't require SSL but has an asp page that redirects into SSL. The 403;4 error page for the site is hooked up to this asp page (this is how we do our non-HTTPS into HTTPS transition). Using Microsoft Network Monitor (3.3), I've just run a session against a server where SSL is working. It can pull apart the SSL exchange as the following messages: SSL: Client Hello SSL: Server Hello. Certificate. Server Hello Done SSL: Client Key Exchange. Change Cipher Spec. Encrypted Handshake Message. SSL: Change Cipher Spec. Encrypted Handshake Message However, on our problem server, I only see: SSL: Client Hello. The next packet from the server (from port 443, so it's listening and responding there) contains only 60 bytes, and just seems to have the Tcp headers and not much else (but I'm by no means an expert at deciphering these things). So, where do I look next? Or what additional information do I need to add to this question, and where do I find it?

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >