Search Results

Search found 45804 results on 1833 pages for 'large files'.

Page 447/1833 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >

  • PASS: Bylaw Changes

    - by Bill Graziano
    While you’re reading this, a post should be going up on the PASS blog on the plans to change our bylaws.  You should be able to find our old bylaws, our proposed bylaws and a red-lined version of the changes.  We plan to listen to feedback until March 31st.  At that point we’ll decide whether to vote on these changes or take other action. The executive summary is that we’re adding a restriction to prevent more than two people from the same company on the Board and eliminating the Board’s Officer Appointment Committee to have Officers directly elected by the Board.  This second change better matches how officer elections have been conducted in the past. The Gritty Details Our scope was to change bylaws to match how PASS actually works and tackle a limited set of issues.  Changing the bylaws is hard.  We’ve been working on these changes since the March board meeting last year.  At that meeting we met and talked through the issues we wanted to address.  In years past the Board has tried to come up with language and then we’ve discussed and negotiated to get to the result.  In March, we gave HQ guidance on what we wanted and asked them to come up with a starting point.  Hannes worked on building us an initial set of changes that we could work our way through.  Discussing changes like this over email is difficult wasn’t very productive.  We do a much better job on this at the in-person Board meetings.  Unfortunately there are only 2 or 3 of those a year. In August we met in Nashville and spent time discussing the changes.  That was also the day after we released the slate for the 2010 election. The discussion around that colored what we talked about in terms of these changes.  We talked very briefly at the Summit and again reviewed and revised the changes at the Board meeting in January.  This is the result of those changes and discussions. We made numerous small changes to clean up language and make wording more clear.  We also made two big changes. Director Employment Restrictions The first is that only two people from the same company can serve on the Board at the same time.  The actual language in section VI.3 reads: A maximum of two (2) Directors who are employed by, or who are joint owners or partners in, the same for-profit venture, company, organization, or other legal entity, may concurrently serve on the PASS Board of Directors at any time. The definition of “employed” is at the sole discretion of the Board. And what a mess this turns out to be in practice.  Our membership is a hodgepodge of interlocking relationships.  Let’s say three Board members get together and start a blog service for SQL Server bloggers.  It’s technically for-profit.  Let’s assume it makes $8 in the first year.  Does that trigger this clause?  (Technically yes.)  We had a horrible time trying to write language that covered everything.  All the sample bylaws that we found were just as vague as this. That led to the third clause in this section.  The first sentence reads: The Board of Directors reserves the right, strictly on a case-by-case basis, to overrule the requirements of Section VI.3 by majority decision for any single Director’s conflict of employment. We needed some way to handle the trivial issues and exercise some judgment.  It seems like a public vote is the best way.  This discloses the relationship and gets each Board member on record on the issue.   In practice I think this clause will rarely be used.  I think this entire section will only be invoked for actual employment issues and not for small side projects.  In either case we have the mechanisms in place to handle it in a public, transparent way. That’s the first and third clauses.  The second clause says that if your situation changes and you fall afoul of this restriction you need to notify the Board.  The clause further states that if this new job means a Board members violates the “two-per-company” rule the Board may request their resignation.  The Board can also  allow the person to continue serving with a majority vote.  I think this will also take some judgment.  Consider a person switching jobs that leads to three people from the same company.  I’m very likely to ask for someone to resign if all three are two weeks into a two year term.  I’m unlikely to ask anyone to resign if one is two weeks away from ending their term.  In either case, the decision will be a public vote that we can be held accountable for. One concern that was raised was whether this would affect someone choosing to accept a job.  I think that’s a choice for them to make.  PASS is clearly stating its intent that only two directors from any one organization should serve at any time.  Once these bylaws are approved, this policy should not come as a surprise to any potential or current Board members considering a job change.  This clause isn’t perfect.  The biggest hole is business relationships that aren’t defined above.  Let’s say that two employees from company “X” serve on the Board.  What happens if I accept a full-time consulting contract with that company?  Let’s assume I’m working directly for one of the two existing Board members.  That doesn’t violate section VI.3.  But I think it’s clearly the kind of relationship we’d like to prevent.  Unfortunately that was even harder to write than what we have now.  I fully expect that in the next revision of the bylaws we’ll address this.  It just didn’t make it into this one. Officer Elections The officer election process received a slightly different rewrite.  Our goal was to codify in the bylaws the actual process we used to elect the officers.  The officers are the President, Executive Vice-President (EVP) and Vice-President of Marketing.  The Immediate Past President (IPP) is also an officer but isn’t elected.  The IPP serves in that role for two years after completing their term as President.  We do that for continuity’s sake.  Some organizations have a President-elect that serves for one or two years.  The group that founded PASS chose to have an IPP. When I started on the Board, the Nominating Committee (NomCom) selected the slate for the at-large directors and the slate for the officers.  There was always one candidate for each officer position.  It wasn’t really an election so much as the NomCom decided who the next person would be for each officer position.  Behind the scenes the Board worked to select the best people for the role. In June 2009 that process was changed to bring it line with what actually happens.  An Officer Appointment Committee was created that was a subset of the Board.  That committee would take time to interview the candidates and present a slate to the Board for approval.  The majority vote of the Board would determine the officers for the next two years.  In practice the Board itself interviewed the candidates and conducted the elections.  That means it was time to change the bylaws again. Section VII.2 and VII.3 spell out the process used to select the officers.  We use the phrase “Officer Appointment” to separate it from the Director election but the end result is that the Board elects the officers.  Section VII.3 starts: Officers shall be appointed bi-annually by a majority of all the voting members of the Board of Directors. Everything else revolves around that sentence.  We use the word appoint but they truly are elected.  There are details in the bylaws for term limits, minimum requirements for President (1 prior term as an officer), tie breakers and filling vacancies. In practice we will have an election for President, then an election for EVP and then an election for VP Marketing.  That means that losing candidates will be able to fall down the ladder and run for the next open position.  Another point to note is that officers aren’t at-large directors.  That means if a current sitting officer loses all three elections they are off the Board.  Having Board member votes public will help with the transparency of this approach. This process has a number of positive and negatives.  The biggest concern I expect to hear is that our members don’t directly choose the officers.  I’m going to try and list all the positives and negatives of this approach. Many non-profits value continuity and are slower to change than a business.  On the plus side this promotes that.  On the negative side this promotes that.  If we change too slowly the members complain that we aren’t responsive.  If we change too quickly we make mistakes and fail at various things.  We’ve been criticized for both of those lately so I’m not entirely sure where to draw the line.  My rough assumption to this point is that we’re going too slow on governance and too quickly on becoming “more than a Summit.”  This approach creates competition in the officer elections.  If you are an at-large director there is no consequence to losing an election.  If you are an officer the only way to stay on the Board is to win an officer election or an at-large election.  If you are an officer and lose an election you can always run for the next office down.  This makes it very easy for multiple people to contest an election. There is value in a person moving through the officer positions up to the Presidency.  Having the Board select the officers promotes this.  The down side is that it takes a LOT of time to get to the Presidency.  We’ve had good people struggle with burnout.  We’ve had lots of discussion around this.  The process as we’ve described it here makes it possible for someone to move quickly through the ranks but doesn’t prevent people from working their way up through each role. We talked long and hard about having the officers elected by the members.  We had a self-imposed deadline to complete these changes prior to elections this summer. The other challenge was that our original goal was to make the bylaws reflect our actual process rather than create a new one.  I believe we accomplished this goal. We ran out of time to consider this option in the detail it needs.  Having member elections for officers needs a number of problems solved.  We would need a way for candidates to fall through the election.  This is what promotes competition.  Without this few people would risk an election and we’ll be back to one candidate per slot.  We need to do this without having multiple elections.  We may be able to copy what other organizations are doing but I was surprised at how little I could find on other organizations.  We also need a way for people that lose an officer election to win an at-large election.  Otherwise we’ll have very little competition for officers. This brings me to an area that I think we as a Board haven’t done a good job.  We haven’t built a strong process to tell you who is doing a good job and who isn’t.  This is a double-edged sword.  I don’t want to highlight Board members that are failing.  That’s not a good way to get people to volunteer and run for the Board.  But I also need a way let the members make an informed choice about who is doing a good job and would make a good officer.  Encouraging Board members to blog, publishing minutes and making votes public helps in that regard but isn’t the final answer.  I don’t know what the final answer is yet.  I do know that the Board members themselves are uniquely positioned to know which other Board members are doing good work.  They know who speaks up in meetings, who works to build consensus, who has good ideas and who works with the members.  What I Could Do Better I’ve learned a lot writing this about how we communicated with our members.  The next time we revise the bylaws I’d do a few things differently.  The biggest change would be to provide better documentation.  The March 2009 minutes provide a very detailed look into what changes we wanted to make to the bylaws.  Looking back, I’m a little surprised at how closely they matched our final changes and covered the various arguments.  If you just read those you’d get 90% of what we eventually changed.  Nearly everything else was just details around implementation.  I’d also consider publishing a scope document defining exactly what we were doing any why.  I think it really helped that we had a limited, defined goal in mind.  I don’t think we did a good job communicating that goal outside the meeting minutes though. That said, I wish I’d blogged more after the August and January meeting.  I think it would have helped more people to know that this change was coming and to be ready for it. Conclusion These changes address two big concerns that the Board had.  First, it prevents a single organization from dominating the Board.  Second, it codifies and clearly spells out how officers are elected.  This is the process that was previously followed but it was somewhat murky.  These changes bring clarity to this and clearly explain the process the Board will follow. We’re going to listen to feedback until March 31st.  At that time we’ll decide whether to approve these changes.  I’m also assuming that we’ll start another round of changes in the next year or two.  Are there other issues in the bylaws that we should tackle in the future?

    Read the article

  • No network upsets gnome

    - by Darren Cook
    An issue that has been bothering me for over a year now. My notebook, running ubuntu 10.04, is almost all the time using a wired connection, with static IP address. And a remote DNS server. Network is configured with entries in /etc/network/interfaces and /etc/resolv.conf, rather than whatever the gnome UI tool was (*) But if I'm out, or simply unplug the network cable, a few things get weird. Specifically the gnome-panel stops working - it is still there, but isn't updating. And opening a nautilus window (e.g. to look at files on the local disk) has huge time-outs. By that I mean it will not open the window for something like 30 or 60 seconds; but when it does finally open it I can see the files and it is perfectly usable. Everything else works fine, alt-tab between windows, etc. I use the commandline to find the pid of gnome-panel, kill it, wait a couple of seconds, and it opens up a fresh panel which is normally usable. (Something like 10 minutes later it will have locked/crashed again; the same for the nautilus windows.) I'm guessing this is a DNS issue? Would setting up a local DNS server help? Guess number 2 was related to having a file server mount (samba, though running on another linux box), and symbolic links to files and directories on that file server on my desktop. My question is a bit vague... Does anyone recognize these symptoms, and have a suggestion? Or do you have some troubleshooting suggestions for narrowing down the problem? My /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myhost # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts 127.0.0.1 testsite.local #Other test website URLs here UPDATE: Some timings to open some desktop folder icons. This is after pulling out the network cable. A sub-directory of the desktop took 23 secs to open up. Content appears immediately (just 8 files, it has no further subdirectories). The home directory icon took 12 seconds to open up, but then took about 30 seconds for the files to appear. I closed it and tried again. This time it took 18 seconds to open up, but then 70 seconds before anything appeared. *: I couldn't work out how to use the gnome network tool for my needs, which include 3-4 static IPs for testing virtual hosts locally.

    Read the article

  • TrueCrypt drive letter not available

    - by Tono Nam
    With c# or a batch file I mount a trueCrypt volume located at A:\volumeTrueCrypt.tc With c# I do: static void Main(string[] args) { var p = Process.Start( fileName:@"C:\Program Files\TrueCrypt\TrueCrypt.exe", arguments:@"/v a:\volumetruecrypt.tc /lw /a /p truecrypt" ); p.WaitForExit(); } the alternative is to run the command on the command line as: C:\Windows\system32>"C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /lw /a /p truecrypt Either way I get the error: Why do I get that error? I was able to run that command the first time. The moment I dismounted the volume and tryied to mount it again I got that error. I know that drive letter W is available because it shows as an available letter on true crypt if I where to open it manually: If I where then click on the button mount and then type the password truecrypt (truecrypt is the password) then it will successfully mount on drive w. Why I am not able to mount it from the command line!? If I change the drive letter on the command line it works. I want to use the drive W though. In other words executing "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /lz /a /p truecrypt will successfully mount that volume on drive z but I do not want to mount it on drive z I want to mount it on drive w. The first time I ran the batch it ran fine. Also if I restart my computer I believe it should work. More info on how to use trueCrypt through the command line can be found at: http://www.truecrypt.org/docs/?s=command-line-usage Edit I was also investivating when does this error occures. In order to generate this error you need to follow this steps. 1) execute the command: (note the /q argument at the end for quiet) "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /ln /a /p truecrypt /q "C...TrueCrypt.exe" = location where trueCrypt is located /v "path" = location where volume is located /n = drive letter n /p truecrypt = password is "trueCrypt" /q = execute in quiet mode. do not show window note I am mounting to drive letter n 2) now volume should be mounted. 3) Open trueCrypt and manually dismount that volume (without using command line) 4) Attempt to run the same command line (without the /q so you see the error) "C:\Program Files\TrueCrypt\TrueCrypt.exe" /v "a:\volumetruecrypt.tc" /ln /a /p truecrypt 5) an error should show up So the problem ocures when I manually dismount the volume. If I dismount it from the command line I get no errors. But I think this is a bug from trueCrypt

    Read the article

  • All the Gear and No Idea: Suggestions for re-designing my home/office/entertainment network

    - by 5arx
    Help/ Advice/ Suggestions please: I have a load of kit that I love but which currently operate in disconnected, sometimes counter-productive way. Because I never really had a masterplan I just added these things one after another and connected them up in ad hoc ways. Since I bought my Macbook I've found I spend much less time on the MacPro that was until then my main machine. Perversely, as my job involves writing .Net software, I spend a lot of Mac time actually inside a Windows 7 VM. I stream media from the HP box to the PS3 and thus to the TV, but its not without its limitations/annoyances. We listen to each other's iTunes libraries but the music files are all over the place and it would be good to know they were all safely in one location (and fully backed up). I need to come up with a strategy that will allow me to use all the kit for work, play (recording live music, making tunes, iMovie work), pushing/streaming media to the TV and sharing files with my other half (she uses a Windows laptop and her iPod touch). Ideally I'd like to be able to work on any of the machines and have a shared homedrive that was visible to all machines so all my current files were synced up wherever i was. It would be great if I could access everything securely and quickly over the web. I'd also like to be able to set up a background backup process. The kit list thus far: Apple MacPro 8GB/3x250GB RAID0 + 1TB Apple MacBook Pro 13" 8GB/250GB - I spend a lot of my work time on a Windows 7 VM on this. Crappy Acer laptop (for children's use - iPlayer, watching movies/tv files) HP Proliant Server 4GB/80GB+160GB+300GB Sun Ultra 10 2 x 80GB (old, but in top-notch condition) PS3 160GB iPod Classic 2 x 8GB iPod Touch Observations: Part of the problem is our dual use of Windows and OS X - we can't go for a pure NT style roaming profile. Because the server is also used for hosting test/beta applications and a SQL Server db, it can't be dedicated to file serving. The two Macs really could do with sharing a roaming profile or similar. I'd love to be able to do something useful with the Ultra 10. My other half has been trying to throw it away for over five years now and regularly ask what function it serves in my study :-( I've got no shortage of 500GB external USB hard drives iMovie files are very large and ideally would be processed on a RAID system. Apple's TimeMachine isn't so great. If anyone could suggest all or part of a setup that would fulfil some of my requirements I'd be very grateful. I am willing to consider purchasing one or two more bits of kit (an Apple TV and a Squeezebox have been moted by friends) if they will help make efficiencies rather than add to the chaos and confusion. Thanks for looking.

    Read the article

  • Can an administration extraction of an MSI file perform registry and/or system wide changes?

    - by Wil
    I am always getting MSI (or setup EXEs which are basically MSI) files, and half the time they really do not need to be a setup. Microsoft is probably one of the biggest sources - almost every time I want to download a little source code sample, it has a MSI which if you install, only usually has three files. I would rather not do an install and add it to the add/remove programs and who knows what else (although I am sure it wouldn't be that bad) for the sake of three files! For this reason, I always use the following command: MSIEXEC /a <filename.msi> /qb TARGETDIR=<directory name> Now, this works fine and I have never had problems... However, I was just browsing some articles on Technet and found the following resource about administration installs. Apparently, MSI files can have two sequences: The AdminUISequence Table and the AdminExecuteSequence Table. I am not so worried about the AdminUISequence Table as it states that "The installer skips the actions in this table if the user interface level is set to basic UI or no UI", and this is what the /qb switch I use does. However, there is nothing similar written against AdminExecuteSequence Table. I realise that many people who write MSI files simply do it for a single end user and probably do not even touch the admin install options, however, is it possible for them to set items that can affect the system and if so, is there a fail proof way of extracting? I do already use 7-zip, however despite it being on the "supported" page, MSI support is lacking... well... completely sucks. It looses the file names and is generally useless. They have a bug which was closed with no reason/resolution over three years ago, and I opened a forum post and haven't had a reply. I would not really want to install any additional programs if I could help it and just want peoples opinions on this. Thanks. edit - Should also say, I run with UAC on, and I have never ever had a elevation prompt whilst performing the MSIEXEC operation, so I am guessing I have never had a system wide change, however, I am still curious as to if it is possible... As if changes (even just to the user) are possible I would do this locally/in a VM and never on a server or place of importance!

    Read the article

  • In search of a network file system with extended caching to speed up file access

    - by Brecht Machiels
    I'm running a small home server that stores my documents. The disks in this server are in a RAID 1 configuration (using Linux md) and it's also periodically being backup up to an external hard drive to make sure I don't lose them. However, I'm always accessing the files from other computers on the home network using an SMB share, and this results in a considerable speed penalty (especially when connected over WLAN). This is quite annoying when editing large files, such as digital camera RAWs, for example. I've been looking for a solution to this problem. It would have to offer some kind of local caching to speed up the file access. The client would preferably not keep a copy of all data on the server, as it consists of a very large collection of photographs, most of which I will not access frequently. Instead, it should only cache the accessed files and sync the changes back in the background. Ideally, it would also do some smart read-ahead (cache the files that are in the same directory as the currently opened file, for examples), but I suppose that's asking a bit much. Synchronization should be automatic (on file change). Conflicting file changes (at the same time on different clients) are unlikely to happen in my use case, but I would prefer if they are handled properly (notification to the user). I've come across the following options, so far: something similar to Dropbox. iFolder seems to be the only thing that comes close, but its reputation (stability) and requirements put me off. A distributed file system such as OpenAFS. I'm not sure this will speed up file access. It is probably overkill for what I need. Maybe NFS or even Samba offer these possibilities. I read a bit about Windows' Offline Files, but its operation seems limited (at least on Windows XP). As this is just for personal use, I'm not willing to spend a lot of money. A free solution would be preferred. Also, the server needs to run on Linux, and I need a client for at least Windows.

    Read the article

  • Deploying Django App with Nginx, Apache, mod_wsgi

    - by JCWong
    I have a django app which can run locally using the standard development environment. I want to now move this to EC2 for production. The django documentation suggests running with apache and mod_wsgi, and using nginx for loading static files. I am running Ubuntu 12.04 on an Ec2 box. My Django app, "ddt", contains a subdirectory "apache" with ddt.wsgi import os, sys apache_configuration= os.path.dirname(__file__) project = os.path.dirname(apache_configuration) workspace = os.path.dirname(project) sys.path.append(workspace) sys.path.append('/usr/lib/python2.7/site-packages/django/') sys.path.append('/home/jeffrey/www/ddt/') os.environ['DJANGO_SETTINGS_MODULE'] = 'ddt.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() I have mod_wsgi installed from apt. My apache/httpd.conf contains NameVirtualHost *:8080 WSGIScriptAlias / /home/jeffrey/www/ddt/apache/ddt.wsgi WSGIPythonPath /home/jeffrey/www/ddt <Directory /home/jeffrey/www/ddt/apache/> <Files ddt.wsgi> Order deny,allow Allow from all </Files> </Directory> Under apache2/sites-enabled <VirtualHost *:8080> ServerName www.mysite.com ServerAlias mysite.com <Directory /home/jeffrey/www/ddt/apache/> Order deny,allow Allow from all </Directory> LogLevel warn ErrorLog /home/jeffrey/www/ddt/logs/apache_error.log CustomLog /home/jeffrey/www/ddt/logs/apache_access.log combined WSGIDaemonProcess datadriventrading.com user=www-data group=www-data threads=25 WSGIProcessGroup datadriventrading.com WSGIScriptAlias / /home/jeffrey/www/ddt/apache/ddt.wsgi </VirtualHost> If I am correct, these 3 files above should correctly allow my django app to run on port 8080. I have the following nginx/proxy.conf file proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; Under nginx/sites-enabled server { listen 80; server_name www.mysite.com mysite.com; access_log /home/jeffrey/www/ddt/logs/nginx_access.log; error_log /home/jeffrey/www/ddt/logs/nginx_error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/jeffrey/www/ddt/; } } If I am correct these two files should setup nginx to take requests on the HTTP port 80, but then direct requests to apache which is running the django app on port 8080. If i go to mysite.com, all I see is Welcome to Nginx! Any advice for how to debug this?

    Read the article

  • Windows XP installation problems

    - by Samurai Waffle
    I recently asked a question on here, and thought I had it working... Here is a link to it. Windows XP Installation problems So basically I'm having trouble getting XP installed. To sum it up, a computer I have had a boot sector virus, and I used Darik's Nuke and Boot to wipe the hard drive clean. So the hard drive has nothing on it. I had to try and install Windows through a DOS prompt, because for some reason it won't read it off the DVD. The UBCD is able to look at the files located on the DVD I have in, but I can't boot from it for some reason. So I extracted it to a USB drive, booted to DOS and started the setup process. Here's the weird thing with DOS... It can only find the C: drive. The C: drive in DOS is the flash drive that I have in, running DOS. I can't find the hard drive anywhere! So anyways, after starting the setup process, it copied the files over to the "hard drive" (which took 16 hours because the version of DOS I ran couldn't run smartdrv.exe), and it said the computer had to reboot. So I let it reboot, and it stopped and said there is no boot device. So I popped in UBCD that I have installed on a flash drive, and I discovered that it had copied the Windows files over to the flash drive and not the hard drive. It never asked where it should extract the files... So I toyed around with UBCD, ran a memory test on the hard drive to make sure it was fine, and it came out clean. So I'm stuck now. How can I get this installed? Writing this, I came up with an idea. If I copy the DOS startup files over to the hard drive, would I be able to start DOS from it? If so, I believe that could fix my problems. Any help is greatly appreciated, because I am running out of ideas and am at my wits end with this computer.

    Read the article

  • logrotate isn't rotating a particular log file (and i think it should be)

    - by Max Williams
    Hi all. For a particular app, i have log files in two places. One of the places has just one log file that i want to use with logrotate, for the other location i want to use logrotate on all log files in that folder. I've set up an entry called millionaire-staging in /etc/logrotate.d and have been testing it by calling logrotate -f millionaire-staging. Here's my entry: #/etc/logrotate.d/millionaire-staging compress rotate 1000 dateext missingok sharedscripts copytruncate /var/www/apps/test.millionaire/log/staging.log { weekly } /var/www/apps/test.millionaire/shared/log/*log { size 40M } So, for the first folder, i want to rotate weekly (this seems to have worked fine). For the other, i want to rotate only when the log files get bigger than 40 meg. When i look in that folder (using the same locator as in the logrotate config), i can see a file in there that's 54M and which hasn't been rotated: $ ls -lh /var/www/apps/test.millionaire/shared/log/*log -rw-r--r-- 1 www-data root 33M 2010-12-29 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stderr.log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stdout.log Some of the other log files in that folder have been rotated though: $ ls -lh /var/www/apps/test.millionaire/shared/log total 91M -rw-r--r-- 1 www-data root 33M 2010-12-29 15:05 test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stderr.log -rw-r--r-- 1 deploy deploy 41K 2010-12-29 11:03 unicorn.stderr.log-20101229.gz -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stdout.log -rw-r--r-- 1 deploy deploy 1.1K 2010-10-15 11:05 unicorn.stdout.log-20101229.gz I think what might have happened is that i first ran this config with a pattern matching *.log, and that means it only rotated the two files that ended in .log (as opposed to -log). Then, when i changed the config and ran it again, it won't do any more since it think's its already had its weekly run, or something. Can anyone see what i'm doing wrong? Is it to do with those top folders being owned by root rather than deploy do you think? thanks, max

    Read the article

  • logrotate isn't rotating a particular log file (and i think it should be)

    - by Max Williams
    Hi all. For a particular app, i have log files in two places. One of the places has just one log file that i want to use with logrotate, for the other location i want to use logrotate on all log files in that folder. I've set up an entry called millionaire-staging in /etc/logrotate.d and have been testing it by calling logrotate -f millionaire-staging. Here's my entry: #/etc/logrotate.d/millionaire-staging compress rotate 1000 dateext missingok sharedscripts copytruncate /var/www/apps/test.millionaire/log/staging.log { weekly } /var/www/apps/test.millionaire/shared/log/*log { size 40M } So, for the first folder, i want to rotate weekly (this seems to have worked fine). For the other, i want to rotate only when the log files get bigger than 40 meg. When i look in that folder (using the same locator as in the logrotate config), i can see a file in there that's 54M and which hasn't been rotated: $ ls -lh /var/www/apps/test.millionaire/shared/log/*log -rw-r--r-- 1 www-data root 33M 2010-12-29 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stderr.log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stdout.log Some of the other log files in that folder have been rotated though: $ ls -lh /var/www/apps/test.millionaire/shared/log total 91M -rw-r--r-- 1 www-data root 33M 2010-12-29 15:05 test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stderr.log -rw-r--r-- 1 deploy deploy 41K 2010-12-29 11:03 unicorn.stderr.log-20101229.gz -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stdout.log -rw-r--r-- 1 deploy deploy 1.1K 2010-10-15 11:05 unicorn.stdout.log-20101229.gz I think what might have happened is that i first ran this config with a pattern matching *.log, and that means it only rotated the two files that ended in .log (as opposed to -log). Then, when i changed the config and ran it again, it won't do any more since it think's its already had its weekly run, or something. Can anyone see what i'm doing wrong? Is it to do with those top folders being owned by root rather than deploy do you think? thanks, max

    Read the article

  • Hell: NTFS "Restore previous versions"...

    - by ttsiodras
    The hell I have experienced these last 24h: Windows 7 installation hosed after bluetooth driver install. Attempting to recover using restore points via "Repair" on the bootable Win7 installation CD. Attempting to go back one day in the restore points. No joy. Attempting to go back two days in the restore points. No joy. Attempting to go back one week in the restore points. Stil no joy. Windows won't boot. Apparently something is REALLY hosed. And then it hits me - PANIC - the restore points somehow reverted DATA files to their older versions! Word, Powerpoint, SPSS, etc document versions are all one week old now. Using the "freshest" restore point. Failed to restore yesterday's restore point!!! I am stuck at old versions of the data!!! Booting KNOPPIX, mounting NTFS partition as read-only under KNOPPIX. Checking. Nope, the data files are still the one week old versions. Booting Win7 CD, Recovery console - Cmd prompt - navigating - yep, data files are still one week old. Removing the drive, mounting it under other Win7 installation. Still old data. Running NTFS undelete on the drive (read-only scan), searching for file created yesterday. Not found. Despair. At this point, idea: I will install a brand new Windows installation, keeping the old one in Windows.old (default behaviour of Windows installs). I boot the new install, I go to my C:\Data\ folder, I choose "Restore previous versions", click on yesterday's date, and click open... YES! It works! I can see the latest versions of my files (e.g. from yesterday). Thank God. And then, I try to view the files under the "yesterday snapshot-version" of c:\Users\MyAccount\Desktop ... And I get "Permission Denied" as soon as I try to open "Users\MyAccount". I make sure I am an administrator. No joy. Apparently, the new Windows installation does not have access to read the "NTFS snapshots" or "Volume Shadow Snapshots" of my old Windows account! Cross-installation permissions? I need to somehow tell the new Windows install that I am the same "old" user... So that I will be able to access the "Users\MyAccount" folder of the snapshot of my old user account. Help?

    Read the article

  • Event ID 17890 (A significant part... paged out.) with SQL Server 2008

    - by Godeke
    I have a machine that has SQL Server 2008 Standard installed. Periodically (about once an hour) I am getting Event ID 17890 several times in a row. An example: 6:28:54 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 10652, committed (KB): 628428, memory utilization: 1%%. 6:34:27 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 332 seconds. Working set (KB): 169780, committed (KB): 546124, memory utilization: 31%%." 6:38:55 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 600 seconds. Working set (KB): 245068, committed (KB): 546124, memory utilization: 44%%." This pattern repeated at 7:26 - 7:37, 8:26 - 8:36, 9:24 - 9:35 and so with the same increasing working set and memory utilization pattern. I don't have any (known) background tasks running at this time. Backups run at 2:00 This subsided from 11:00 at night until it resumed at 4:00 in the morning and has been continuing the intermittent 10 minute glitch periods. As this server has plenty of RAM (the commit charge has peaked at 2,871,564 of 4,194,012 physical) I disabled the paging files after reading several items I dug up searching Google and not finding any of them changing the situation. This pattern I am documented is after removing the paging files, so I'm not even sure where we are paging the SQL process could be going. I also changed the SQL process memory to have a minimum of 500MB and a maximum of 2GB of RAM (as this is a light duty database server serving only a small workgroup). Has anyone encountered this? Prior to disabling the page files this error would cause 5 minutes of disk thrashing that disabled access to the databases, files, IIS webs and so on. Since disabling the page files it just logs strange things, but I'm not seeing a performance drop at least. Any suggestions would be welcome.

    Read the article

  • debian packages version convention

    - by JackWu
    I'm using debian/Ubuntu, and get confused about versions of packages. When using dpkg -l command, I get: ii vim 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor ii vim-common 2:7.3.429-2ubuntu2.1 Vi IMproved - Common files ii vim-runtime 2:7.3.429-2ubuntu2.1 Vi IMproved - Runtime files ii vim-tiny 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor - compact version ii virt-what 1.11-1 detect if we are running in a virtual machine ii w3m 0.5.3-5ubuntu1 WWW browsable pager with excellent tables/frames support ii watershed 6 reduce superfluous executions of idempotent command ii wget 1.13.4-2ubuntu1 retrieves files from the web ii whiptail 0.52.11-2ubuntu10 Displays user-friendly dialog boxes from shell scripts ii whoopsie 0.1.33 Ubuntu crash database submission daemon ii wimlib9 1.5.0-1~webupd8~precise Library to extract, create, modify, and mount WIM files ii wimtools 1.5.0-1~webupd8~precise Tools to extract, create, modify, and mount WIM files ii wireless-tools 30~pre9-5ubuntu2 Tools for manipulating Linux Wireless Extensions ii wpasupplicant 0.7.3-6ubuntu2.1 client support for WPA and WPA2 (IEEE 802.11i) ii x11-common 1:7.6+12ubuntu2 X Window System (X.Org) infrastructure ii x11-utils 7.6+4ubuntu0.1 X11 utilities ii xauth 1:1.0.6-1 X authentication utility ii xbitmaps 1.1.1-1 Base X bitmaps ii xclip 0.12-1 command line interface to X selections ii xfonts-encodings 1:1.0.4-1ubuntu1 Encodings for X.Org fonts ii xfonts-utils 1:7.6+1 X Window System font utility programs ii xkb-data 2.5-1ubuntu1.3 X Keyboard Extension (XKB) configuration data ii xml-core 0.13 XML infrastructure and XML catalog file support rc xpdf 3.02-21build1 Portable Document Format (PDF) reader ii xterm 271-1ubuntu2.1 X terminal emulator ii xz-lzma 5.1.1alpha+20110809-3 XZ-format compression utilities - compatibility commands ii xz-utils 5.1.1alpha+20110809-3 XZ-format compression utilities ii zabbix-agent 1:1.8.11-1 network monitoring solution - agent ii zlib1g 1:1.2.3.4.dfsg-3ubuntu4 compression library - runtime ii zlib1g-dev 1:1.2.3.4.dfsg-3ubuntu4 compression library - development ii zsh 4.3.17-1ubuntu1 shell with lots of features The third column is version, but it all messed up in a way I can't understand. I mean, different packages use total different naming specification. Here are the major questions: Why there are ubuntu in them, and there are not? what all the special -~+ mean? alpha and build, dfsg, what are they? Can I just use them casually? vim and other packages have 2:, what does that mean? How version comparison works, since they can be so different? Can anyone please explain this to me? Or where can I find an official document? Thanks in advance.

    Read the article

  • Has anyone achieved true differential sync with rsync in ESXi?

    - by Julius
    Berate me later on the fact that I'm using the service console to do anything in ESXi... I've got a working rsync binary (v3.0.4) that I can use in ESXi 4.1U1. I tend to use rsync over cp when copying VM's or backups from one local datastore to another local datastore. I've used rsync to copy data from one ESXi box to another but that was just for small files. In now trying to do true differential syncs of backups taken via ghettoVCB between my primary ESXi machine and a secondary one. But even when I do this locally (one datastore to another datastore on the same ESXi machine) rsync appears to copy the files in their entirety. I've got two VMDK's totally 80GB in size, and rsync still takes anywhere between 1 and 2 hours but the VMDK's aren't growing that much daily. Below is the rsync command I'm executing. I am copying locally because ultimately these files will get copied onto a datastore created from a LUN on a remote system. Its not an rsync that'll be serviced by an rsync daemon on a remote system. rsync -avPSI VMBACKUP_2011-06-10_02-27-56/* VMBACKUP_2011-06-01_06-37-11/ --stats --itemize-changes --existing --modify-window=2 --no-whole-file sending incremental file list >f..t...... VM-flat.vmdk 42949672960 100% 15.06MB/s 0:45:20 (xfer#1, to-check=5/6) >f..t...... VM.vmdk 556 100% 4.24kB/s 0:00:00 (xfer#2, to-check=4/6) >f..t...... VM.vmx 3327 100% 25.19kB/s 0:00:00 (xfer#3, to-check=3/6) >f..t...... VM_1-flat.vmdk 42949672960 100% 12.19MB/s 0:56:01 (xfer#4, to-check=2/6) >f..t...... VM_1.vmdk 558 100% 2.51kB/s 0:00:00 (xfer#5, to-check=1/6) >f..t...... STATUS.ok 30 100% 0.02kB/s 0:00:01 (xfer#6, to-check=0/6) Number of files: 6 Number of files transferred: 6 Total file size: 85899350391 bytes Total transferred file size: 85899350391 bytes Literal data: 2429682778 bytes Matched data: 83469667613 bytes File list size: 129 File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 2432530094 Total bytes received: 5243054 sent 2432530094 bytes received 5243054 bytes 295648.92 bytes/sec total size is 85899350391 speedup is 35.24 Is this because ESXi is itself making so many changes to the VMDK's that as far as rsync is concerned the entire file has to be retransmitted? Has anyone actually achieved actual diff sync with ESXi?

    Read the article

  • Deployment/provisioning tool for commercial applications (not developed in-house)

    - by mfinni
    I help manage a few hosted commercial applications, and we have a lot of manual processes involved when doing new customer-instance deployments into the shared (multitenant) environment. Allow me to describe the most relevant features, and then we can talk about the tools. We have an application on AIX, that requires dozens of changes to config files (some plain text, some XML) as well as a good number of commands to be run on multiple servers - some to start the new instance, some to restart our shared authentication and reporting engines, etc. The config changes follow templates, of course. The servers in question will also depend on the initial conditions specified by the implementer/deployer - we may choose to deploy a given customer to our servers in Europe, or one set of servers may be active-active whereas a different set of servers is active-passive - in short, there's a lot of complications. We have another application that run on IIS 6 and SQL. The DBAs don't want any automation of the SQL components and that's fine with me, but automating the IIS bit would be great. For a new customer instance, we make a filesystem copy of a template Virtual Directory target named after the new customer, make a new AppPool to match, edit a VirDir template .xml file to replace the filepaths and AppPool names with the new ones, and then make a new VirDir from the modified template XML to point to the new filesystem folder and app pool. For the first case, something like ControlTier or Chef might be good. For the second, the new(ish) Web Deploy from MS would probably do a good job. Has anyone used these tools or others to do something similar for applications? More of a nice-to-have, not a fixed requirement - Has anyone used anything that works on both platforms? I'm looking for something free, because the official word is that within a year, we will have whatever HP has renamed the OpsWare suite, which should be able to do stuff like this. Edit - based on someone's suggestion, looking at CFengine for the AIX application, it doesn't seem to address my pain. The problem isn't keeping a given config synced across dozens of servers, we have rsync for that. The problem is that onboarding a new customer instance touches dozens of files, putting pieces of the same or similar information into them - some are new stanzas in existing files, some are new files, and some are new directories. This is a several-hours-long process that is also error-prone because it's mostly done by hand. I guess I'm looking for config-file generation and management. I have built a small Perl script to do something similar for a much smaller case - it binds a CSV file into variables, and then does a copy-and-search-and-replace from a set of template config files. I could probably do the same here.

    Read the article

  • freebsd-update from 8.3-RELEASE to 9.0-RELEASE: How to deal with dozens of diffs?

    - by Stefan Lasiewski
    I am upgrading a FreeBSD 8.3-RELEASE system to FreeBSD 9.0-RELEASE using freebsd-update. This is my first time performing a major version upgrade in FreeBSD. At one point in the process, freebsd-update performs a diff on files which are different then what is expected for the 9.0-RELEASE. It compares the current version on the system with the new changes added from 9.0-RELEASE. There are dozens of files in the list. Thus, I am presented with dozens and dozens of diffs which open in a vi window and look like this: The following file could not be merged automatically: /etc/ntp.conf Press Enter to edit this file in vi and resolve the conflicts manually... ### vi window opens <<<<<<< current version driftfile /etc/ntp/drift ======= # # $FreeBSD: release/9.0.0/etc/ntp.conf 195652 2009-07-13 05:51:33Z dwmalone $ # # Default NTP servers for the FreeBSD operating system. # # Don't forget to enable ntpd in /etc/rc.conf with: # ntpd_enable="YES" # # The driftfile is by default /var/db/ntpd.drift, check # /etc/defaults/rc.conf on how to change the location. # >>>>>>> 9.0-RELEASE restrict default notrust nomodify ignore And so on. This requires that I manually edit each file and remove the strings like <<<<<<< current version >>>>>>> 9.0-RELEASE and =======. As I discovered afterwards, if I don't remove these strings, they end up in the file afterwards. There are dozens of files which differ between 8.3 and 9.0, and I have a dozen local modifications myself. It appears that freebsd-update is using a diff, sdiff or mergemaster function of some sort, but I can't tell what it is doing exactly. Processing these files is tedious. Is there a way that I can just say "Accept new version" or "keep old version" or "Your merge is correct"? There has got to be an easier way to deal with these files. I must be missing something. This isn't a huge problem for one machine, but eventually I'll be doing this dozens of times and I want to find an easier way.

    Read the article

  • SQL Server database filled the hard drive and freeing up space isn't possible

    - by Jon
    I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

    Read the article

  • UNIX Question to b answered??? [closed]

    - by Nits
    Create a tree structure named ‘training’ in which there are 3 subdirectories – ‘level 1’,’ level2’ and ‘cep’. Each one is again further divided into 3. The ‘level 1’ is divided into ‘sdp’, ‘re’ and ‘se’. From the subdirectory ‘se’ how can one reach the home directory in one step and also how to navigate to the subdirectory ‘sdp’ in one step? Give the commands, which do the above actions? How will you copy a directory structure dir1 to dir2 ? (with all the subdirectories) How can you find out if you have the permission to send a message? Find the space occupied ( in Bytes) by the /home directory including all its subdirectories. What is the command for printing the current time in 24-hour format? What is the command for printing the year, month, and date with a horizontal tab between the fields? Create the following files: chapa, chapb, chapc, chapd, chape, chapA, chapB, chapC, chapD, chapE, chap01, chap02, chap03, chap04, chap05, chap11, chap12, chap13, chap14, and chap15. With reference to question 7, What is the command for listing all files ending in small letters? With reference to question 7, What is the command for listing all files ending in capitals? With reference to question 7, What is the command for listing all files whose last but one character is 0? With reference to question 7, What is the command for listing all files which end in small letters but not ‘a’ and ‘c’? In an organisation one wants to know how many programmers are there. The employee data is stored in a file called ‘personnel’ with one record per employee. Every record has field for designation. How can grep be used for this purpose? In the organisation mentioned in question 12 how can sed be used to print only the records of all employees who are programmers. In the organisation mentioned in question 12 how can sed be used to change the designation ‘programmer’ to ‘software professional’ every where in the ‘personnel’ file Find out about the sleep command and start five jobs in the background, each one sleeping for 10 minutes. How do you get the status of all the processes running on the system? i.e. using what option?

    Read the article

  • Rails /tmp/cache/assets permissions issue using Debian virtual machine hosted on OS X Lion

    - by Jim
    I am running Parallels Desktop 7 on OS X Lion. I have a VM with Debian installed, and inside that VM I setup a Rails development environment. I am using Parallels Tools to share out my OS X home directory to the VM - the goal here is to run the Rails server on the VM, but host the files on OS X (so they are automatically backed up, and so I can use tools like Textmate to develop with). Everything seems to work with the shared directory - my Debian user can read, write, and execute files. However, when I cloned a recent Rails project from Git, I got an error message when it tried to compile the CSS assets. My symptoms are exactly the same as in the question: http://stackoverflow.com/questions/7556774/rails-sprocket-error-compiling-css-assest-chown-issue I believe this is permissions-based, but it is really weird. My entire Rails project directory has permissions set to 777 and my Debian user owns it. If I navigate into /tmp/cache/assets, those permissions are the same. However, the three-character directories Rails is creating (DCE, DA1, D05, etc...) are being created without write permissions! If I refresh the Rails page a few times, about 4 or 5 (with Rails creating new three-character directories every time), eventually it will create one of the directories with the proper 777 permissions and everything will work! This will persist until I make a change to the CSS files and it has to recompile. Does anyone have any idea what might be going on here? I can't fathom why it is creating temp directories with incorrect permissions, or why after a few refreshes the good permissions kick in and it works... It definitely seems to be an issue with the share, since if I move the project into a different directory on the VM, it seems to work fine. On the OS X side, I've given the shared folder 777 permissions as well, but no dice...any ideas? Update I've found that the number of times I need to refresh before it works is not random - it has to do with how many assets are being compiled. For example, if I edit one of my CSS files, and there are four CSS files in the app/assets/stylesheets directory, I have to refresh four times before the app will finally work without the operation not permitted error...

    Read the article

  • Correcting tree from messed up file tree in NTFS partition

    - by Fullmooninu
    It's a real messed situation, but I'm quite at the end of my options. It's my personal hardrive, so it's very important for me, and yes, I have no backup =( The short story: 1) I have two discs. One with Windows, and another where I had a bit of empty space at the front of the disk, so i could install Linux. The rest was occupied by a 1.8TB NTFS partition filled with data. 2) I installed Linux, and after a while realized there was not enough space for everything, so I tried using Gparted, and told it to re-size the NTFS partition, to a lesser size. 3) The system jammed. I had to reboot and broke the Resizing operation. Here's what I did to fix it: a) Rebooted into Linux Live, and used Testdisk,to deep analyze the disk, and recover the possible partitions. It found several versions of the NTFS partitions, probably made during the resizing. I told Testdisk to open every one of them, and only one could list its files. When trying to open the other options on Testdisk, it showed an error message. I assumed the one without errors, to be the correct one, and I told Testdisk to recover the partition, and write a new MBR. b) The partition had errors, and Linux has a NTFS fixing tool, used it, but the system still had errors. c) So I booted into windows and use chkdsk to correct all errors in the partition. d) Everything seems fine, but now, back in Windows, when I open one file, it opens another file, or part of another file. As in, some files took up the position of other files. What I think happened is that I recovered an old tree, and not the most current one. And that one just happened to be intact, while the most recent one was damaged. As such, the files that were moved during the failed resizing, were now, during the automatic correction, assumed wrongly to be in their correct places. So when I open a file, it tries to open another one. Radiohead - Creep.mp3 will open and it will actually be a bit from another song, or even code from a jpg. Some files seem to be all right, but others have seemed to have had their position taken by others. Anyone knows of something really powerful that can help me solve this?

    Read the article

  • Need help recovering a corrupt SQL database

    - by user570079
    I have a very special case that I have been working on for several days. I have a very large SQL Server 2008 database (about 2 TB) that contains 500 filegroups to support very large partitioned tables. Recently we had a catastophic failure on one of the drive and lost several filegroups and the database became in-accessible. We have been doing filegroup backups on a daily basis, but due to other issues, we lost our most recent backup of the log and the primary filegroup. We have all the data backed up but the primary filegroup backup is old. There have been no schema changes since the primary filegroup backup, but the lsn's are now all out of sync and we cannot recover the data. I have tried everything I could think of (and have tried just about every trick and hack I could google) but I still end up at the same point where I get messages saying that the files for filegroup x do not match the primary filegroup. I am now at the point of trying to edit the system tables (we have a separate temporary environment to do this so we are not worried about corrupting any production databases). I have tried updated sys.sysdbreg, sys.sysbrickfiles, and sys.sysprufiles to try to trick SQL into thinking all the files are online, but a "Select * From OPENROWSET(TABLE DBPROP, 5)" shows a different database state from what I see in sys.sysdbreg. I am now thinking I need to somehow edit the headers of the actual data files to try to line up the lsn's with the primary. I appreciate any help anyone can give me here, but please do not respond with things like "you are not supposed to do edit mdf, ndf files...." or "see msdn article....", etc. This is an advanced emergency case and I need a real hack so we can just get to the data in this corrupt database and export to a fresh new database. I know there is a way to do this, but not knowing what the DBPROP system functions does (i.e. does it look at system tables or does it actually open the file) is keeping me from trying to figure out how to fool SQL into allowing me to read these files. Thanks for any help.

    Read the article

  • Add keyboard languages to XP, Vista, and Windows 7

    - by Matthew Guay
    Do you regularly need to type in multiple languages in Windows?  Here we’ll show you the easy way to add and change input languages to your keyboard in XP, Vista, and Windows 7. Windows Vista and 7 come preinstalled with support for viewing a wide variety of languages, so adding an input language is fairly simply.  Adding an input language is slightly more difficult in XP, and requires installing additional files if you need an Asian or Complex script language.  First we show how to add an input language in Windows Vista and 7; it’s basically the same in both versions.  Then, we show how to add a language to XP, and also how to add Complex Script support.  Please note that this is only for adding an input language, which will allow you to type in the language you select.  This does not change your user interface language. Change keyboard language in Windows 7 and Vista It is fairly simple to add or change a keyboard language in Windows 7 or Vista.  In Windows 7, enter “keyboard language” in the Start menu search box, and select “Change keyboards or other input methods”. In Windows Vista, open Control Panel and enter “input language” in the search box and select “Change keyboards or other input methods”.  This also works in Windows 7. Now, click Change Keyboards to add another keyboard language or change your default one. Our default input language is US English, and our default keyboard is the US keyboard layout.  Click Add to insert another input language while still leaving your default input language installed. Here we selected the standard Thai keyboard language (Thai Kedmanee), but you can select any language you want.  Windows offers almost any language you can imagine, so just look for the language you want, select it, and click Ok. Alternately, if you want, you can click Preview to see your layout choice before accepting it.  This is only the default characters, not ones that will be activated with Shift or other keys (many Asian languages use many more characters than English, and require the use of Shift and other keys to access them all).  Once your finished previewing, click close and then press Ok on the previous dialog. Now you will see both of your keyboard languages in the Installed services box.  You can click Add to go back and get more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Also, you can now change the default input language from the top menu.  This is the language that your keyboard will start with when you boot your computer.  So, if you mainly use English but also use another language, usually it is best to leave English as your default input language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages.  Alternately you can switch input languages by pressing Alt+Shift on your keyboard. Some complex languages, such as Chinese, may have extra buttons to change input modes to accommodate their large alphabet. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and select the “Advanced Key Settings” tab.  Here you can change settings for Caps Lock and change or add key sequences to change between languages. Also, the On-Screen keyboard will display the correct keyboard language (here the keyboard is displaying Thai), which can be a helpful reference if your physical keyboard doesn’t have your preferred input language printed on it.  To open this, simply enter “On-Screen keyboard” in the start menu search, or click All Programs>Accessories>On-Screen keyboard. Change keyboard language in Windows XP The process for changing the keyboard language in Windows XP is slightly different.  Open Control Panel, and select “Date, Time, Language, and Regional Options”.   Select “Add other languages”. Now, click Details to add another language.  XP does not include support for Asian and complex languages by default, so if you need to add one of those languages we have details for that below. Click Add to add an input language. Select your desired language from the list, and choose your desired keyboard layout if your language offers multiple layouts.  Here we selected Canadian French with the default layout. Now you will see both of your keyboard languages in the Installed services box.  You can click Add to go back and add more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages.  Alternately you can switch input languages by pressing Alt+Shift on your keyboard. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and click the “Key Settings” button on the bottom of the dialog.  Here you can change settings for Caps Lock and change or add key sequences to change between languages. Add support to XP for Asian and Complex script languages Windows XP does not include support for Asian and Complex script languages by default, but you can easily add them to your computer.  This is useful if you wish to type in one of these languages, or simply want to read text written in these languages, since XP will not display these languages correctly if they are not installed.  If you wish to install Chinese, Japanese, and/or Korean, check the “Install files for East Asian languages” box.  Or, if you need to install a complex script language (including Arabic, Armenian, Georgian, Hebrew, the Indic languages, Thai, and Vietnamese), check the “Install files for complex script and right-to-left languages” box.   Choosing either of these options will open a prompt reminding you that this option will take up more disk space.  Support for complex languages will require around 10Mb of hard drive space, but East Asian language support may require 230 Mb or more free disk space.  Click Ok, and click apply to install your language files. You may have to insert your XP CD into your CD drive to install these files.  Insert the disk, and then click Ok. Windows will automatically copy the files, including fonts for these languages… …and then will ask you to reboot your computer to finalize the settings.  Click Yes, and then reopen the “Add other languages” dialog when your computer is rebooted, and add a language as before.     Now you can add Complex and/or Asian languages to XP, just as above.  Here is the XP taskbar language selector with Thai installed. Conclusion Unfortunately we haven’t found a way to add Asian and complex languages in XP without having an XP disc. If you know of a way, let us know in the comments. (No downloading the XP disc from torrent site answers please) Adding an input language is very important for bilingual individuals, and can also be useful if you simply need to occasionally view Asian or Complex languages in XP.  And by following the correct instructions for your version of Windows, it should be very easy to add, change, and remove input languages. Similar Articles Productive Geek Tips Show Keyboard Shortcut Access Keys in Windows VistaKeyboard Ninja: 21 Keyboard Shortcut ArticlesAnother Desktop Cube for Windows XP/VistaThe "Up" Keyboard Shortcut for Windows 7 or Vista ExplorerWhat is ctfmon.exe And Why Is It Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

    Read the article

  • SQL SERVER – World Shapefile Download and Upload to Database – Spatial Database

    - by pinaldave
    During my recent, training I was asked by a student if I know a place where he can download spatial files for all the countries around the world, as well as if there is a way to upload shape files to a database. Here is a quick tutorial for it. VDS Technologies has all the spatial files for every location for free. You can download the spatial file from here. If you cannot find the spatial file you are looking for, please leave a comment here, and I will send you the necessary details. Unzip the file to a folder and it will have the following content. Then, download Shape2SQL tool from SharpGIS. This is one of the best tools available to convert shapefiles to SQL tables. Afterwards, run the .exe file. When the file is run for the first time, it will ask for the database properties. Provide your database details. Select the appropriate shape files and the tool will fill up the essential details automatically. If you do not want to create the index on the column, uncheck the box beside it. The screenshot below is simply explains the procedure. You also have to be careful regarding your data, whether that is GEOMETRY or GEOGRAPHY. In this example,  it is GEOMETRY data. Click “Upload to Database”. It will show you the uploading process. Once the shape file is uploaded, close the application and open SQL Server Management Studio (SSMS). Run the following code in SSMS Query Editor. USE Spatial GO SELECT * FROM dbo.world GO This will show the complete map of world after you click on Spatial Results in Spatial Tab. In Spatial Results Set, the Zoom feature is available. From the Select label column, choose the country name in order to show the country name overlaying the country borders. Let me know if this tutorial is helpful enough. I am planning to write a few more posts about this later. Note: Please note that the images displayed here do not reflect the original political boundaries. These data are pretty old and can probably draw incorrect maps as well. I have personally spotted several parts of the map where some countries are located a little bit inaccurately. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Add-On, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Spatial, SQL Tips and Tricks, SQL Utility, T SQL, Technology

    Read the article

  • Turn A Flash Drive Into a Portable Web Server

    - by Matthew Guay
    Portable applications are very useful for getting work done on the go, but how about portable servers?  Here’s how you can turn your flash drive into a portable web server. Getting Started To put a full web server on our flash drive, we’re going to use XAMPP Lite.  This lightweight, preconfigured server includes recent versions of Apache, MySQL, and PHP so you can run most websites and webapps directly from it.  You could use the full XAMPP, which includes more features such as a FileZilla FTP server and OpenSSL, but for most purposes, the light version is plenty for a portable server. Download the latest version of XAMPP Lite (link below).  In this tutorial, we used the self-extracting EXE version; you could choose the ZIP file and extract the files yourself, but we found it easier to use the executable. Run the installer, and click Browse choose where to install your server. Select your flash drive, or a folder in it, and click Ok.  Make sure your flash drive has at least 250MB of available storage space.  XAMPP will create an xampplite folder and store all the files in it during the installation.   Click Install, and all of the files will be extracted to your flash drive.  This may take a few moments depending on your flash drive’s speed. When the extraction process is finished, a Command Prompt window will open to finish the installation.  The first prompt will ask if you want to add shortcuts to the start menu and desktop; enter “n” since we don’t want to create start menu links to our portable server. Now enter “y” to configure XAMPP’s directories automatically. Finally, enter “y” to make XAMPP fully portable.  It will set up the servers to run without specific drive letters so your server will run from any computer. XAMPP will finalize your changes; press Enter when everything is completed. Setup will automatically launch the command line version of XAMPP.  On first run, confirm that your time zone is correct. And that’s it!  You can now run XAMPP’s control panel by entering 1, or you can exit and run XAMPP from any other computer with your flash drive. To complete your portable webserver kit, you may want to install Portable Firefox or Iron Browser on your flash drive so you always have your favorite browser ready to use. Running your portable server Using your portable server is very simple.  Open the xampplite folder on your flash drive and launch xampp-control.exe. Click Start beside Apache and MySql to get your webserver running. Please note: Do not check the Svc box, as this will run the server as a Windows service.  To keep XAMPP portable, you do not want it running as a service! Windows Firewall may prompt you that it blocked the server; click Allow access to let your server run. Once they’re running, you can click Admin to open the default XAMPP admin page running from your local webserver.  Or, you can view it by browsing to http://localhost/ or http://127.0.0.1/ in your browser. If everything is working correctly, you should see this page in your browser.  Choose your default language… And then you’ll see the default XAMPP admin page.   Click the Status link on the left sidebar to make sure everything is running correctly. If you click the Admin button for MySql in the XAMPP Control Panel, it will open phpMyAdmin in your default browser.  Alternately, you can open the MySql admin page by entering http://localhost/phpmyadmin/ or http://127.0.0.1/phpmyadmin/ in your favorite browser. Now you can add your own webpages to your webserver.  Save all of your web files in the \xampplight\htdocs\ folder on your flash drive. Install WordPress in your portable server Since XAMPP Lite includes MySql and PHP, you can even run webapps such as WordPress, the popular CMS and blogging platform.  Download WordPress (link below), and extract the files to the \xampplite\htdocs folder on your flash drive. Now all of the WordPress files are stored in \xampplite\htdocs\wordpress on your flash drive. We still need to setup WordPress on our portable server.  Open your MySql admin page http://localhost/phpmyadmin/ to create a new database for WordPress.  Enter a name for your database in the “Create new database” box, and click Create. Click the Privileges tab on the top, and the select “Add a new User”.   Enter a username and password for the database, and then click the Go button on the bottom of the page. Using WordPress Now, in your browser, enter http://localhost/wordpress/wp-admin/install.php.  Click Create a Configuration File to continue. Make sure you have your Database name, username, and password we created previously, and click “Let’s Go!” Enter your WordPress database name, username, and password, leave the other two entries as default, and click Submit. You should now have the database all ready to go.  Click “Run the install” to finish installing WordPress. Enter a title, username, and password for your test blog, as well as your email address, and then click “Install WordPress”. You now have a portable install of WordPress.  Click “Log In” to  access your WordPress admin page. Enter your username and password, and click Log In. Here you can add pages, posts, themes, extensions, and anything else just like you would on a normal WordPress site.  This is a great way to experiment with WordPress without messing up your real website. You can view your portable WordPress site by entering http://localhost/wordpress/ in your address bar. Closing your server When you’re done running your test server, click the Stop button on each of the services and then click the Exit button in the XAMPP control panel.  If you press the exit button on the top of the window, it will just minimize the control panel to the tray.   Alternately, you can shutdown your server by running xampp_stop.exe from your xampplite folder. Conclusion XAMPP Lite gives you a great way to run a full webserver directly from your flash drive.  Now, anywhere you go, you can test and tweak your webpages and webapps from any Windows computer.  Links Download XAMPP Lite Download WordPress Similar Articles Productive Geek Tips BitLocker To Go Encrypts Portable Flash Drives in Windows 7How To Use BitLocker on Drives without TPMSpeed up Your Windows Vista Computer with ReadyBoostView and Manage Flash Cookies the Easy WayInstall and Run Applications from Your iPod, Flash Drive or Mp3 Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

    Read the article

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >