Search Results

Search found 16499 results on 660 pages for 'off rhoden'.

Page 447/660 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >

  • The Numbers of Customer Experience

    - by Christie Flanagan
    This week, we’ll be continuing our conversations about Customer Experience (CX) on the Oracle WebCenter blog.  While we all know that customer experience is critically important for acquiring new customers and engendering long term brand loyalty, I thought we could kick this week off by taking a look at the numbers of customer experience.   I’m sure you’ll agree that nothing quite puts things into perspective like numbers and figures. A whopping 86% of consumers say that they are willing to pay more for a better customer experience.  But many companies are failing to step up to the challenge.  And when companies fail deliver on customer experience expectations, they leave money on the table. A huge percentage of customers, 89%, begin doing business with a competitor following a poor customer experience. Breaking up isn’t hard to do and today’s empowered customers have no qualms about taking their business elsewhere when their expectations for customer experience are not met. Over a quarter of consumers, 26%, posted a negative comment on a social networking site like Facebook or Twitter following a poor customer experience. Today, individual customer service failures have the ability to easily snowball.  An unsatisfied customer has the ability to easily share their rancor with their entire social network and chip away at your brand’s reputation. A large number of consumers, 79%,  who shared complaints about poor customer experience online had their complaints ignored.  Companies ignore customer complaints at their own peril.  And unsatisfied customers, when handled effectively, have the potential to become advocates for your brand.  Of the 21% of consumers who did get responses to complaints, more than half had positive reactions to the same company about which they were previously complaining. Half of consumers will give a brand only a week to respond to a question before they stop doing business with them.  The clock is ticking when customers have questions about your brand and a week is an eternity in the realm of customer experience.  The source for these stats is the 2011 Customer Experience Impact (CEI) Report, which explores the relationship between consumers and brands.  The report is based on a survey commissioned by RightNow (acquired by Oracle in 2012) and conducted by Harris Interactive. If you’re interested in seeing more facts and figures about customer experience, download the full report.

    Read the article

  • More on PHP and Oracle 11gR2 Improvements to Client Result Caching

    - by christopher.jones
    Oracle 11.2 brought several improvements to Client Result Caching. CRC is way for the results of queries to be cached in the database client process for reuse.  In an Oracle OpenWorld presentation "Best Practices for Developing Performant Application" my colleague Luxi Chidambaran had a (non-PHP generated) graph for the Niles benchmark that shows a DB CPU reduction up to 600% and response times up to 22% faster when using CRC. Sometimes CRC is called the "Consistent Client Cache" because Oracle automatically invalidates the cache if table data is changed.  This makes it easy to use without needing application logic rewrites. There are a few simple database settings to turn on and tune CRC, so management is also easy. PHP OCI8 as a "client" of the database can use CRC.  The cache is per-process, so plan carefully before caching large data sets.  Tables that are candidates for caching are look-up tables where the network transfer cost dominates. CRC is really easy in 11.2 - I'll get to that in a moment.  It was also pretty easy in Oracle 11.1 but it needed some tiny application changes.  In PHP it was used like: $s = oci_parse($c, "select /*+ result_cache */ * from employees"); oci_execute($s, OCI_NO_AUTO_COMMIT); // Use OCI_DEFAULT in OCI8 <= 1.3 oci_fetch_all($s, $res); I blogged about this in the past.  The query had to include a specific hint that you wanted the results cached, and you needed to turn off auto committing during execution either with the OCI_DEFAULT flag or its new, better-named alias OCI_NO_AUTO_COMMIT.  The no-commit flag rule didn't seem reasonable to me because most people wouldn't be specific about the commit state for a query. Now in Oracle 11.2, DBAs can now nominate tables for caching, either with CREATE TABLE or ALTER TABLE.  That means you don't need the query hint anymore.  As well, the no-commit flag requirement has been lifted.  Your code can now look like: $s = oci_parse($c, "select * from employees"); oci_execute($s); oci_fetch_all($s, $res); Since your code probably already looks like this, your DBA can find the top queries in the database and simply tune the system by turning on CRC in the database and issuing an ALTER TABLE statement for candidate tables.  Voila. Another CRC improvement in Oracle 11.2 is that it works with DRCP connection pooling. There is some fine print about what is and isn't cached, check the Oracle manuals for details.  If you're using 11.1 or non-DRCP "dedicated servers" then make sure you use oci_pconnect() persistent connections.  Also in PHP don't bind strings in the query, although binding as SQLT_INT is OK.

    Read the article

  • Designing a completely new database/gui solution for my compnay

    - by user1277304
    I'm no expert when it come to everything Visual Studio 2010 and utilizing SQL server 2008. I'm sure some of my personal projects I've built for personal use would get laughed off the face of the planet, but SQLCe has been the solution I was looking for those home type of projects. And they work, flawlessly. Now I feel it's time to step up to the big league. I want to develop a complete, unified and module based solution for my company that I'm working for. We're still using stuff from the 80s for goodness sake! I use Excel and query the ancient database on my own because I can't stand the GUI. Nothing against people of age, but the IDE our programmers are using is from the stone age, and they use APL of all things with it. I've yet to see a radio button control anywhere in the GUI where it would make sense. Anyway, I want to do this right from the ground up. I'm by no means a newbie when it comes to programming in .NET 2010, however, I want the entire solution to be professionally done. I want version control, test projects, project flow, SQL 2008 integration and all the bells and whistles that come with that. I know for a fact that if we had something like that running, not only would development costs and time be slashed four fold, but the possibilities for expansion and performance would sky rocket. (Between the GUI an our DB engine, it can only use ONE CORE! ONE! It's 2012 for goodness sake!) Our business is growing and our current ancient solution just can't keep up, and I'd hate to see our business go down in flames because our programmer is stuck in the 80's and refuses to use anything current. So I ask you guys, the experts and know-it-alls, where do I start? Are there any gems of good books out there in the haystack of all "This for dummies" type of deals? I already have several people backing me in this endeavor, and while it may seem brash to just usurp the current programmers, I'm doing this for the company as a whole.

    Read the article

  • CMS vs Admin Panel?

    - by Bob
    Okay, so this probably seems like an unusual, more grammar related question, but I was unsure of what to call it. If you use a software such as vBulletin or MyBB or even Blogger and you're the administrator (or other, lesser position such as moderator) of the forum, or publisher/author of the blog, you generally have access to something of an "admin panel". For example, vBulletin's admin panel looks like this and Blogger's admin panel looks something like this. While they both look different and do different things, the goal is fundamentally the same: to provide the user with a method for adding, modifying, or deleting content... to let them control and administrate their forum or blog. Also, they're both made specifically by the company for use in a specific product. Now, there's also options like Drupal. It seems to offer quite a bit more and be quite a bit more generalized. How does something like this work? If you were freelancing, would you deploy a website with Drupal, or would it be something the client might already have installed on their own server? I've never really used Drupal, only heard about it, so please let me know. Also, there seems to be other options like cPanel, a sort of global CMS that allows you to administrate over your entire website. How do those work in comparison to Drupal, or the administrative panels with vBulletin? They seem to serve related, but different purposes. Basically, what is the norm? If I'm developing a web application for a group that needs to be able to edit their website without the need to go into the code or the database (or rather, wants to act in a graphical, easy-to-use content-management/admin panel), would it also be necessary to write my own miniature admin panel? Or would I be able to send them off knowing that they have cPanel? Or could something like Drupal fill this void? Again, I'm a little new to web development, and I'm working on planning out my first, real, large website. So I need a little advice on the standards and expectations for web development - security and coding practices aside, what should I be looking for as far as usability and administration for the client (who will be running the site once I'm done creating the website)? Any extra tips would also be appreciated! Oh, and just a little bit: I'm writing the website using Ruby on the Sinatra framework (both Ruby and Sinatra are things I'm fairly comfortable with) and I'm not being paid to make the website (and I will also be a user, and one of the three administrators of the website) - it's being built for a club I'm in.

    Read the article

  • Remote Task Flow vs. WSRP Portlets

    - by Frank Nimphius
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A remote task flow is bounded task flow that is deployed as a stand-alone Java EE application on a remote server with its URL Invoke property set to url-invoke-allowed. The remote task flow is accessed either from a direct browser GET request or, when called from another ADF application, through the task flow call activity. For more information about how to invoke remote task flows from a task flow call activity see chapter 15.6.4 How to Call a Bounded Task Flow Using a URL of the Oracle Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework at http://docs.oracle.com/cd/E23943_01/web.1111/b31974/taskflows_activities.htm#CHDJDJEF Compared to WRSP portlets, remote task flows in Oracle JDeveloper 11g R1 and R2 have a functional limitation in that they cannot be embedded as a region on a page but require the calling ADF application to navigate off to another application and page. The difference between a remote task flow call using the task flow call activity and a simple redirect to a remote Java EE application is that the remote task flow has a state token attached that allows to restore the state of the calling application upon task flow return. A use case for a remote task flow call activity is a "yellow page lookup" scenario in which different ADF applications use an remote task flow to lookup people, products or similar to return a selected value to the calling application. Note that remote task flow calls need to be performed from a bounded or unbounded top level task flow of the calling application. If called from a region (using the parent call activity) in a page, the region state is not recovered upon task flow return. ADF developers recently have identified remote task flows as an architecture pattern to partition their ADF applications into independently deployed Java EE applications. While this sounds like a desirable use of the remote task flow feature, it is not possible to achieve for as long as remote task flows don't render as an ADF region.

    Read the article

  • BIP 10.1.3.4.x June 2010 Update Available

    - by Tim Dexter
    A new patchset for 10.1.3.4.0 and 10.1.3.4.1 is available on Metalink. some notes: The patch number is 9791839. This patchset includes 28 new bug fixes since the last patchset release on March 31. This is a culmulative update that includes all the fixes and enhancements from previous updates. The patch will supercede the other two updates. Install instructions are in the readme inside the patch There is also a new BIP client patch available, 9821068. No new template building features to my knowledge but there is an update to the template viewer to allow you to test and debug you siny new Excel templates. Server 8529759XMLP_TEMPLATE_DESIGNER CANNOT SAVE / UPLOAD TEMPLATE 8566455 BI PUBLISHER SCHEDULER DOES NOT START WITH JNDI DATA SOURCE 9295667RESPONSE OF GETSCHEDULEDREPORTINFO RETURNS STATUS AS 'UNKNOWN' INSTEAD OF 'SCHED 9542413 UNABLE TO CREATE A NEW TEMPLATE FROM UI 9546137 EXCEL ANALYZER TEMPLATE FAILS FOR A STRUCTURED XML WHEN IT IS UPLOADED 9556338 SIEBEL - BIP PARAMETERS SORT ORDER 9560562 BI PUBLISHER CACHE DIRECTORY FILLING UP AND POINTING TO INVALID DIRECTORY 9646599 USER ROLE DEFINED AS PRIMARYGROUP IN ACTIVEDIRECTORY GROUP ARE NOT RECOGNIZED 9664768 ER: NEED TO BIND USER ATTRIBUTE VALUES DEFINED IN ACTIVEDIRECTORY IN DATA QUERY 9665075 BI PUBLISHER AFTER 9546699 NOTIFICATIONS FOR REPORTS FAIL 9669973 ER: NEED TO SUPPORT PRE-PROCESSING XML WITH XSL FOR EXCEL TEMPLATE 9704401 ER: NEED TO SUPPORT DEFAULT GROUP FOR ALL USERS IN LDAP/AD SECURITY 9711899 SEARCH PARAMETER IS NOT VISIBLE WHEN SCHEDULE A REPORT 9753736 SOME ROLES FROM ACTIVEDIRECTORY ARE NOT LISTED IN ADMIN ROLE-FOLDER MAPPING 9771354 MULTIPLE PARAMETERS IN 10.1.3.4.1 DATA TEMPLATE ACT ACT DIFFERENTLY FROM 10.1.3. 9772982 "REFRESH OTHER PARAMETERS ON CHANGE" DOESN'T WORK PROPERLY Core  8599646 ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 9377593 SOME ROWS HEIGHT IN HTML/EXCEL OUTPUT ARE TOO BIG IN BI PUBLISHER 9487030 NAVIGATION TREE REPEATING TWICE IN PDF DCCUMENT CREATED BY BI PUBLISHER 9509432 PERFORMANCE ISSUE WHEN USING PDF TEMPLATE 9534424 PS: DOCUMENT-REPEAT-FULLPATH-ELEMENTNAME SHOULDNT USE DOT "." AS PATH SEPARATOR 9553360 FORMPROCESSOR CANNOT PARSE SOME PDF TEMPLATES 9554959 TEXT IN AUTOSHAPE IS NOT PROPERLY CUT OFF FOR LINE WRAPPING 9569417 AFTER APPLYING PATCH 9509432 PDF TEMPLATES WITH DBDRV PRODUCE NO OUTPUT 9571670 ER: EXCEL TEMPLATE TO SUPPORT XSLT LOGIC AND XSL CUSTOM EXTENTIONS 9589809 XSL:CALL-TEMPLATE IS MISSING IN GENERATED XSL FILE 9605920 BOOKMARK TESTCASE FAILED DUE TO ER9283933 9689634 PRINT FLOW CHART USING ACROSS 3 DOWN 0 GIVES EXTRA BLANK PAGES You might have noticed some fixes and ehancements to the Excel templates so I can get back on those now. There is a part two to the Mapviewer BIP Mashup coming ... just need aanother 4 hours in the day to squeeze it in.

    Read the article

  • ZFS pool broken after upgrading to 14.04 LTS

    - by cruiserparts
    Well, I have been putting off upgrading to 14.04 for fear that I would break something. Actually for fear that it would break zfs (or I would break it). I am bascially slightly better than novice at linux. Spent the last couple of hours trying to get the pool back. Now I am at the stage where I don't think I have a complete failure, but I am worried that I may break it. So if could help me not break it, and recover it, I would be thankful. My zfs is file storage and not boot. It was working fine for a year and was working perfectly before the upgrade (scrub and everything was fine). I was confident that the upgrade would work (or at least I could fix it) because I had upgraded once in the past, the pool went missing, but I was able to get it back. I have reinstalled zfs, zfs utilities, and some dependencies (after searching this forum) I think what happened is 14.04 deleted some config file, or specified disk names differntly, but I could be wrong. When I set the pool up originally, I was using specific device Ids as I recall (because I did not want to break things if they got reassigned at boot) So see if this helps. I can confirm that old mountpoint folders are there but empty. no talloc stackframe at ../source3/param/loadparm.c:4864, leaking memory pool: naspool1 state: UNAVAIL status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM naspool1 UNAVAIL 0 0 0 insufficient replicas raidz1-0 UNAVAIL 0 0 0 insufficient replicas scsi-SATA_WDC_WD1001FALS-_WD-WMATV0990825 UNAVAIL 0 0 0 scsi-SATA_WDC_WD1001FALS-_WD-WMATV2995365 UNAVAIL 0 0 0 scsi-SATA_WDC_WD10EARS-00_WD-WMAV51894349 UNAVAIL 0 0 0 ___@ourserver:~$ sudo zpool import naspool1 cannot import 'naspool1': a pool with that name is already created/imported, and no additional pools with that name were found ___@ourserver:~$ sudo zfs list no datasets available What other output can I post to help? I'm thinking the update deleted some zfs config files. It seems like the pool exists and certainly 3 perfectly working disks did not fail at once. I am worried that I may break something without a little bit of guideance. Thanks.

    Read the article

  • I'd like to switch from 32-bit to 64-bit within same version

    - by Marty Fried
    I have a 32-bit installation of 11.10 on my 64-bit (4 GB) home AMD system. I have recently read up a bit on 64-bit version, and it seems that it would be a marginally better choice now for me. I have read about several methods to help reinstall all the various apps, using either dpkg's get-selections/set-selections and dselect in various ways, or using synaptic's save/get markings. The problem here is that I've read several variations, and I'm not sure which is best. I have enough disk space to do this with a brand new partition, so I'm not too worried about destroying anything, but I don't really want to make it my life's work, hence my appeal for expert tips. Since it's the same version, would it be safe to copy configuration files from the 32-bit system? I'd guess my home directory and /etc might be enough, and would save at least most of the time to reconfigure. But are there difference in configuration files in either of these directories for 32 vs 64 bits that might cause problems? After reinstalling to 64-bit, I can then continue along the 64 bit path for upgrades, but I thought it would be easier to switch the same version, than to try to reinstall apps and upgrade at the same time. Some methods I've seen suggested, among others: A. From Ubuntu forums On your old system (assuming it is still working), start up Synaptic and go: File->Save Markings and choose a file name along with a location (like a USB drive) that you can use when you have installed your new system). You need to check on the bottom: "Save full state, not only changes" This file contains a list of all your currently installed packages, and when you have installed and booted up your new system (and configured your repositories to the best for your location - as we all do, don't we?) then start up Synaptic and go: File-Read Markings and point it at your saved file, and after that has completed then select Apply to kick off the download & installation of all of those packages you had installed previously! B. From the same discussion: According to section 6.4.9 of the Debian Reference Manual, the following will save both the list of packages installed and their debconf configuration: # dpkg --get-selections "*" >myselections # or use \* # debconf-get-selections > debconfsel.txt and the following will reinstall and reconfigure them: # dselect update # debconf-set-selections < debconfsel.txt # dpkg --set-selections <myselections # apt-get -u dselect-upgrade # or dselect install C. A variation on the above I've seen a lot, this from stackoverflow: dpkg --get-selections > package_list then on the new install: cat package_list | sudo dpkg --set-selections && sudo apt-get dselect-upgrade I don't really understand B, or why it's slightly different than many others.

    Read the article

  • Oracle is Sponsoring LinuxCon Europe 2012

    - by Zeynep Koch
    Architecture is amazing in Barcelona but you will also be impressed with Oracle Linux sessions in LinuxCon Europe as well.  Oracle is one of the key sponsors in LinuxCon Europe and we have great sessions to show you why Oracle Linux is best for your "IT architecture"! We also have a booth where you can pick up latest Oracle Linux and Oracle VM DVD Kit and Virtualization for Dummies booklet. Don't forget to visit us at technology showcase Booth #19. Oracle Sessions at LinuxCon Europe 2012:  1. OCFS2: Status and Overview - Lenz Grimmer, Oracle Wednesday November 7, 2012 10:40am - 11:25am Venue: Diamant OCFS2, Oracle's general-purpose shared-disk cluster file system for Linux has come a long way since its development started in 2003. Distributed under the GPL and part of the mainline Linux Kernel, it is also included in Oracle Linux and plays a vital role in products like Oracle VM, Oracle RAC or E-Business Suite. This presentation will provide a general technical overview as well as an update on the latest developments. Attendees will learn about the features and improvements that set OCFS2 apart from other Linux-based cluster file systems, including: Heartbeat implementation: global vs. local heartbeats Storage optimizations: Extent-based Allocations, Hole punching, Reflinks 2. Status of Linux Tracing - Elena Zannoni, Oracle Wednesday November 7, 2012 11:35am - 12:20am Venue: Diamant There have been many developments recently in the Linux tracing area. The tracing infrastructure in the kernel is getting more robust, with  the recent introduction of uprobes to allow the implementation of user  space tracing, and new features of perf. There are many tracing tools to choose from, including the newest kid on the block, DTrace for Linux.  This talk will take the audience through the main tracing facilities  available today whether more tightly integrated with the kernel code, or maintained stand alone. 3. MySQL Security Model and Pluggable Authentication - Kristofer Pettersson, Oracle Wednesday November 7, 2012 1:50pm - 2:35pm Venue: Diamant With an increasing security awareness among web and cloud developers, knowing how to secure your database from unauthorized or malicious access has become important. This talk explains the MySQL security model, pluggable authentication, new auditing features and rounds off with some pointers on how to securely integrate your database into your Linux web stack. We look forward to seeing you in Barcelona, Spain on November 5-9, 2012. Register today 

    Read the article

  • Database Security: The First Step in Pre-Emptive Data Leak Prevention

    - by roxana.bradescu
    With WikiLeaks raising awareness around information leaks and the harm they can cause, many organization are taking stock of their own information leak protection (ILP) strategies in 2011. A report by IDC on data leak prevention stated: Increasing database security is one of the most efficient and cost-effective measures an organization can take to prevent data leaks. By utilizing the data protection, access control, account management, encryption, log management, and other security controls inherent in the database management system, entities can institute first-level control over the widest range of protected information. As a central repository for unstructured data, which is growing at leaps and bounds, the database should be the first layer providing information leakage protection. Unfortunately, most organizations are not taking sufficient steps to protect their databases according to a survey of the Independent Oracle User Group. For example, any operating system administrator or database administrator can access the all the data stored in the database in most organizations. Without any kind of auditing or monitoring. And it's not just administrators, database users can typically access the database with ad-hoc query tools from their desktop and by-pass any application level controls. Despite numerous regulations calling for controls to limit the powers of insiders, most organizations still put too many privileges in the hands of their employees. Time and time again these excess privileges have backfired. Internal agents were implicated in almost half of data breaches according to the Verizon Data Breach Investigations Report and the rate is rising. Hackers also took advantage of these excess privileges very successfully using stolen credentials and SQL injection attacks. But back to the insiders. Who are these insiders and why do they do it? In 2002, the U.S. Secret Service (USSS) behavioral psychologists and CERT information security experts formed the Insider Threat Study team to examine insider threat cases that occurred in US critical infrastructure sectors, and examined them from both a technical and a behavioral perspective. A series of fascinating reports has been published as a result of this work. You can learn more by watching the ISSA Insider Threat Web Conference. So as your organization starts to look at data leak prevention over the coming year, start off by protecting your data at the source - your databases. IDC went on to say: Any enterprise looking to improve its competitiveness, regulatory compliance, and overall data security should consider Oracle's offerings, not only because of their database management capabilities but also because they provide tools that are the first layer of information leak prevention. Learn more about Oracle Database Security solutions and get the whitepapers, demos, tutorials, and more that you need to protect data privacy from internal and external threats.

    Read the article

  • Turn Chrome’s New Tab Page into an Ubuntu Forums Powerhouse

    - by Asian Angel
    There’s a lot of start page plug-ins for Google Chrome, but if you’re an Ubuntu Forums enthusiast, you might be interested in the powerful UbuntuForums.org Start Page extension. Using the Ubuntu Forums Chrome Start Page Once you’ve installed the extension and opened a new tab, you’ll notice quite a difference from the boring default “New Tab Page”. While you may look at this and wonder if what you see is all that there is to it, there’s actually a lot of hidden customization and functionality. The upper left corner is where you will control the content displayed in the “Ubuntu New Tab Page”. The “Buttons Toolbar” that you see at the top lets you shift between the types of content viewed, from RSS feeds to bookmarks and more. This entire set of links provides direct links to the appropriate section in the Ubuntu Forums. As with the set of links pictured above each of these will open in a new tab when clicked on. There’s even a feature to browse wallpapers from DesktopNexus with categories on the left and pictures to the right. If you want to return to the regular layout you should use the “Start Page Link” highlighted here. Options The options will allow you to customize the colors shown in the “Ubuntu New Tab Page” to create a very nice match to your current browser and/or system theme if desired. You can also do some customization to the fonts, “Bookmark Shortcuts”, and populate the “Custom Links Section” in the main page. Conclusion If you are an Ubuntu enthusiast then this will be a very useful extension to add to your browser. The wealth of direct links and built-in functionality make this extension worth trying. Links Download the Ubuntuforums.org Start Page extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Turn Off Auto-Play of Audio and Video CDs and DVDs in UbuntuScroll Backwards From the Ubuntu Server Command LineAnnouncing the How-To Geek ForumsDisable the System Beep on Ubuntu EdgyEnable Smooth fonts on Ubuntu Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • Implementing the Reactive Manifesto with Azure and AWS

    - by Elton Stoneman
    Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/31/implementing-the-reactive-manifesto-with-azure-and-aws.aspxMy latest Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS has just been published! I’d planned to do a course on dual-running a messaging-based solution in Azure and AWS for super-high availability and scale, and the Reactive Manifesto encapsulates exactly what I wanted to do. A “reactive” application describes an architecture which is inherently resilient and scalable, being event-driven at the core, and using asynchronous communication between components. In the course, I compare that architecture to a classic n-tier approach, and go on to build out an app which exhibits all the reactive traits: responsive, event-driven, scalable and resilient. I use a suite of technologies which are enablers for all those traits: ASP.NET SignalR for presentation, with server push notifications to the user Messaging in the middle layer for asynchronous communication between presentation and compute Azure Service Bus Queues and Topics AWS Simple Queue Service AWS Simple Notification Service MongoDB at the storage layer for easy HA and scale, with minimal locking under load. Starting with a couple of console apps to demonstrate message sending, I build the solution up over 7 modules, deploying to Azure and AWS and running the app across both clouds concurrently for the whole stack - web servers, messaging infrastructure, message handlers and database servers. I demonstrating failover by killing off bits of infrastructure, and show how a reactive app deployed across two clouds can survive machine failure, data centre failure and even whole cloud failure. The course finishes by configuring auto-scaling in AWS and Azure for the compute and presentation layers, and running a load test with blitz.io. The test pushes masses of load into the app, which is deployed across four data centres in Azure and AWS, and the infrastructure scales up seamlessly to meet the load – the blitz report is pretty impressive: That’s 99.9% success rate for hits to the website, with the potential to serve over 36,000,000 hits per day – all from a few hours’ build time, and a fairly limited set of auto-scale configurations. When the load stops, the infrastructure scales back down again to a minimal set of servers for high availability, so the app doesn’t cost much to host unless it’s getting a lot of traffic. This is my third course for Pluralsight, with Nginx and PHP Fundamentals and Caching in the .NET Stack: Inside-Out released earlier this year. Now that it’s out, I’m starting on the fourth one, which is focused on C#, and should be out by the end of the year.

    Read the article

  • How do I get long command lines to wrap to the next line?

    - by BrianH
    Edit It was my .bashrc file. I've copied the same profile from machine to machine, and I used special characters in my $PS1 that are somehow throwing it off. I'm now sticking with the standard bash variables for my $PS1. Thanks to @ændrük for the tip on the .bashrc! ...End Edit... Something I have noticed in Ubuntu for a long time that has been frustrating to me is when I am typing a command at the command line that gets longer (wider) than the terminal width, instead of wrapping to a new line, it goes back to column 1 on the same line and starts over-writing the beginning of my command line. (It doesn't actually overwrite the actual command, but visually, it is overwriting the text that was displayed). It's hard to explain without seeing it, but let's say my terminal was 20 characters wide (Mine is more like 120 characters - but for the sake of an example), and I want to echo the English alphabet. What I type is this: echo abcdefghijklmnopqrstuvwxyz But what my terminal looks like before I hit the key is: pqrstuvwxyzghijklmno When I hit enter, it echos abcdefghijklmnopqrstuvwxyz so I know the command was received properly. It just wrapped my typing after the "o" and started over on the same line. What I would expect to happen, if I typed this command in on a terminal that was only 20 characters wide would be this: echo abcdefghijklmno pqrstuvwxyz Background: I am using bash as my shell, and I have this line in my ~/.bashrc: set -o vi to be able to navigate the command line with VI commands. I am currently using Ubuntu 10.10 server, and connecting to the server with Putty. In any other environment I have worked in, if I type a long command line, it will add a new line underneath the line I am working on when my command gets longer than the terminal width and when I keep typing I can see my command on 2 different lines. But for as long as I can remember using Ubuntu, my long commands only occupy 1 line. This also happens when I am going back to previous commands in the history (I hit Esc, then 'K' to go back to previous commands) - when I get to a previous command that was longer than the terminal width, the command line gets mangled and I cannot tell where I am at in the command. The only work-around I have found to see the entire long command is to hit "Esc-V", which opens up the current command in a VI editor. I don't think I have anything odd in my .bashrc file. I commented out the "set -o vi" line, and I still had the problem. I downloaded a fresh copy of Putty and didn't make any changes to the configuration - I just typed in my host name to connect, and I still have the problem, so I don't think it's anything with Putty (unless I need to make some config changes) Has anyone else had this problem, and can anyone think of how to fix it? Thanks in advance! Brian

    Read the article

  • Oracle Service Cloud May 2014 Release – Focus on your driving by JP Saunders

    - by Tuula Fai
    The next time you’re twiddling dials on your car’s dashboard to get the air to blow in the right direction, and the right song to play on the stereo, while pulling on the wires to charge your phone and punching in passwords to re-sync your hands-free headset to take a call, consider this… Does having a better dashboard UI in your car improve your driving performance? The Tesla car has one of the most modern and intuitive dashboards in any commercial car today. It is actually based on the design of a smart phone, which can download apps and updates directly from the cloud.  The 17” touchscreen, Lynx-based dashboard totally integrates all channels and devices, allowing the driver to focus on the smooth driving and power of this luxury (toy) car.  What the folks at Tesla didn't do was avoid the complexity of our needs. Instead, they streamlined them. And, while we might not all be able to afford a Tesla, their approach demonstrates that a modern UI approach can ultimately make a positive difference in our lives and businesses.  This is why the productivity and effectiveness of a Modern Contact Center is many times greater than that of a traditional contact center. Agents in a Modern Contact Center get to focus on the task at hand, the customer engagement, rather than stumbling their way through Lego blocks of complexity.  The Oracle Service Cloud is a modern approach to customer service that empowers your agents to achieve greater focus on improving your operational and strategic success through streamlined business processes.  Here are some of the recent May 2014 release highlights to the Oracle Service Cloud: Performance Enhanced Desktop UI A modern agent desktop interface that optimizes clumsy tasks, logins, screens and workflows and is optimized for agent and system performance. Improvements include performance for drag-and-drop configurable views, saved searches, and improved caching for high-speed performance even during disconnected or slow internet access.  Customer Experience Routing A streamlined automatic way to connect the right customer need to the best agent skills, based on multidimensional variables such as product skills, language skills, workload, call volume to optimize the connection and resolution experience. On-The-Go Mobile Improvements to the Agent mobile app that extend connectivity to websites, and customer surveys that are mobile-ready and rendered for any device, and ensure the customer’s voice is captured while the insight is still top of mind.  Infused Social Engagement Enhancements to infused social capabilities allow agents to respond in social threads directly from within the agent desktop, with the information becoming part of the incident record for automatic actions (such as replay or escalate) triggered off the response. Front-End Siebel Contact Center The market leading online Web Customer Self-Service interface from the Oracle Service Cloud, is now out-of-the-box ready for Oracle Siebel customers. Deploy a new online web self-service interface in a matter of weeks to have customers self-serve and self-solve answers, with escalated incidents routed directly into the Oracle Siebel Contact Center. For more information on the latest enhancements for the Oracle Service Cloud, please see the Oracle Service Cloud May 2014 Capabilities and Benefits. Related blogs: Oracle Service Cloud Feb 2014

    Read the article

  • Software monetization that is not evil

    - by t0x1n
    I have a free open-source project with around 800K downloads to date. I've been contacted by some monetization companies from time to time and turned them down, since I didn't want toolbar malware associated with my software. I was wondering however, is there a non-evil way to monetize software ? Here are the options as I know them: Add a donation button. I don't feel comfortable with that as I really don't need "donations" - I'm paid quite well. Donating users may feel entitled to support etc. (see the second to last bullet) Add ads inside your application. In the web that may be acceptable, but in a desktop program it looks incredibly lame. Charge a small amount for each download. This model works well in the mobile world, but I suspect no one will go for it on the desktop. It doesn't mix well with open source, though I suppose I could charge only for the binaries (most users won't go to the hassle of compiling the sources). People may expect support etc. after having explicitly paid (see next bullet). Make money off a service / community / support associated with the program. This is one route I definitely don't want to take, I don't want any sort of hassle beyond coding. I assure you, the program is top notch (albeit simple) and I'm not aware of any bugs as of yet (there are support forums and blog comments where users may report them). It is also very simple, documented, and discoverable so I do think I have a case for supplying it "as is". Add affiliate suggestions to your installer. If you use a monetization company, you lose control over what they propose. Unless you can establish some sort of strong trust with the company to supply quality suggestions (I sincerely doubt it), I can't have that. Choosing your own affiliate (e.g. directly suggesting Google Toolbar) is possibly the only viable solution to my mind. Problem is, where do I find a solid affiliate that could actually give value to the user rather than infect his computer with crapware? I thought maybe Babylon (not the toolbar of course, I hate toolbars)?

    Read the article

  • Stop trying to be perfect

    - by Kyle Burns
    Yes, Bob is my uncle too.  I also think the points in the Manifesto for Software Craftsmanship (manifesto.softwarecraftsmanship.org) are all great.  What amazes me is that tend to confuse the term “well crafted” with “perfect”.  I'm about to say something that will make Quality Assurance managers and many development types as well until you think about it as a craftsman – “Stop trying to be perfect”. Now let me explain what I mean.  Building software, as with building almost anything, often involves a series of trade-offs where either one undesired characteristic is accepted as necessary to achieve another desired one (or maybe stave off one that is even less desirable) or a desirable characteristic is sacrificed for the same reasons.  This implies that perfection itself is unattainable.  What is attainable is “sufficient” and I think that this really goes to the heart both of what people are trying to do with Agile and with the craftsmanship movement.  Simply put, sufficient software drives the greatest business value.   I've been in many meetings where “how can we keep anything from ever going wrong” has become the thing that holds us in analysis paralysis.  I've also been the guy trying way too hard to perfect some function to make sure that every edge case is accounted for.  Somewhere in there, something a drill instructor said while I was in boot camp occurred to me.  In response to being asked a question by another recruit having to do with some edge case (I can barely remember the context), he said “What if grasshoppers had machine guns?  Would the birds still **** with them?”  It sounds funny, but there's a lot of wisdom in those words.   “Sufficient” is different for every situation and it’s important to understand what sufficient means in the context of the work you’re doing.  If I’m writing a timesheet application (and please shoot me if I am), I’m going to have a much higher tolerance for imperfection than if you’re writing software to control life support systems on spacecraft.  I’m also likely to have less need for high volume performance than if you’re writing software to control stock trading transactions.   I’d encourage anyone who has read this far to instead of trying to be perfect, try to create software that is sufficient in every way.  If you’re working to make a component that is sufficient “better”, ask yourself if there is any component left that is not yet sufficient.  If the answer is “yes” you’re working on the wrong thing and need to adjust.  If the answer is “no”, why aren’t you shipping and delivering business value?

    Read the article

  • Send an E-mail Quickly with the GmailThis! Bookmarklet

    - by Asian Angel
    Sometimes you need to send out a quick e-mail for a project that you are working on, something really important that you just remembered, or perhaps just a note to yourself. If you use Gmail and like keeping things simple then join us as we look at the GmailThis! Bookmarklet. GmailThis! in Action To get set up all that you need to do is visit the webpage (link provided below) and drag the bookmarklet to your “Bookmarks Toolbar”. For our example we decided to go with the “personal note” approach. As you can see here we selected/highlighted a portion of the text and then clicked on our new bookmarklet. The bookmarklet will automatically copy and paste the name of the webpage, the URL, and any text that you selected/highlighted into the new e-mail. A nice feature that we liked was that it opened in a new temporary window to help focus on composing our letter. This is what you will see when you have finished your letter and clicked “Send”. The window will automatically close itself after a few seconds so that you do not even have to worry with it afterwards. Looking at our “Inbox” there is our new e-mail looking oh so nice. Conclusion If you need to send out a quick e-mail using your Gmail account then this bookmarklet makes it as quick and simple as possible. This is definitely one to add to your bookmarklets collection. Links Get the GmailThis! Bookmarklet for your browser Similar Articles Productive Geek Tips How to Send and Receive Hotmail from Your Gmail AccountShare Your Favorite Webpages with the AddThis BookmarkletPower Up and Manage Your Windows Send To Menu with Send To ToysTurn off New Mail Notification for PocoMail Junk Mail FolderCreate an Email Template in Outlook 2003 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online

    Read the article

  • Booting Ubuntu on HP Pavilion g7 - 13.04 [duplicate]

    - by death2040
    This question already has an answer here: My computer boots to a black screen, what options do I have to fix it? 24 answers I have a HP Pavilion G7 with an AMD A4 processor and Radeon graphics. I want to install Ubuntu on my laptop but whenever I put the Ubuntu live CD in it and boot to it, the screen shows the Ubuntu logo and the four little dots then after about a minute or two the screen goes black. I can tell the screen is still on but it doesn't have anything on it. I'm beginning to wonder if its a driver problem but I can't really install the drivers when I cant even get Ubuntu to show anything except a loading screen. I've already tried using 12.04 and 12.10 and all the others down to Ubuntu 10. none of them worked. All the other versions don't even show the Ubuntu logo. I'd prefer to have Ubuntu 13.04 on it if its possible but I haven't had any luck finding a solution. I've also tried using WUBI installer in Windows 7 but all that did was make my computer slower for windows and it does the same with the screen when i boot it to Ubuntu. I'm trying to use Ubuntu alongside Windows 7. I cant find any solution on Google. It wont load anything and I know that there is a program called grub on Ubuntu that I used on my desktop computer when it had graphics trouble but the trouble with my desktop was minor things like the screen would flash and then show weird patterns on the screen. But I can't find anything on what to do with the HP laptop. Please help. I use this laptop a lot for games on Windows 7 and I just want to use Ubuntu for when I take my laptop to school and for school stuff. Edit: I just tried booting it in nomodeset and some other things and still didn't work. It did boot up but now when it goes to install alongside windows it crashes and says Ubuntu is forcing reboot or something like that Also, this question is different from the black screen at boot issue because when I do use nomodeset on my computer and select install Ubuntu it will go as far as the screen where you can choose to replace Windows or run alongside Windows. Then after I click continue it ejects the live CD and turns off my computer without installing anything. The error message it shows when it ejects the disk says signal 15, shutting down - modem manager [1675]: <info> Caught nm-dispatcher.action: Caught signal 15, shutting down... *Deconfiguring network interfaces... Please remove installation media and close the tray (if any) then press ENTER *Deactivating swap... *Stopping remaining crypto disks... *stopping early crypto disks... unmount: /run/lock: not mounted unmount: /run/shm: not mounted

    Read the article

  • Business Insight, IT Execution: 9 Project Management Tips

    - by Sylvie MacKenzie, PMP
    Excerpt from Profit Magazine - by David Rosenbaum When Marcos Baccetto was first asked to be the business-side project lead on Eaton Corporation’s Vehicle Group South America (VGSA) Oracle project, the operations services manager responsible for running manufacturing was, he confesses, “a little afraid” because of his lack of IT experience. Today, Baccetto calls the project “a fantastic experience,” and he is a true believer in the benefits of a close relationship between IT implementers and their line-of-business peers. Through his partnership with Jesiele Lima, then VGSA IT manager, Baccetto and Eaton’s South American operations team came to understand several important principles of business and IT. Here he shares nine tips managers should consider when working on an enterprise technology project. 1. Make it a business project, not an IT project. All levels of functional management must have ownership, responsibility, and accountability for the success of the implementation. 2. Share responsibility. Business owners should sign off on tests and data conversion. 3. Clean your data. Dedicating a team to improve core data quality prior to project launch can be a significant time-saver. 4. Select resources properly. Have functional people who can translate business needs to IT and can influence organizational change. 5. Manage scope. Follow project management methodologies and disciplines. 6. Adopt common processes, global solutions. Avoid customized, local solutions. The big-picture business goals can get lost in the details. 7. Implement processes prior to the go-live date. Change management can be key. Keep the workforce informed and train users in advance. 8. Define metrics milestones. Assume there will be a crisis during deployment. Having baseline metrics to compare against will help implementers keep their cool—and the project moving forward. 9. The sponsor’s commitment is critical. It is needed to support the truly difficult decisions.

    Read the article

  • 80 Years of Supplier Misinformation: How can Oracle Supplier Hub Help?

    - by Mala Narasimharajan
    By Mark Peachy       Well, we're down to the final week before this year's Oracle Open World conference kicks-off on Sunday and there's still plenty of work to be done to be ready in time.  One of the great benefits I think that attendees get from Open World is the opportunity to listen to other organizations talk about their implementation experiences.  Typically, these sessions provide hugely valuable insights that have been gained during a deployment, delivering a wealth of practical information on what it really takes to get an organization up and running with a new module or a revamped business process.And I'm not just saying this because we're lucky enough to have one of our early implementers join us for this year's Supplier Hub/Supplier Lifecycle Management MDM session!  With a multi-phased deployment underway, this customer is working to fix a long, 80-year history without much in the way of formal processes or tools to manage all of their accumulated supplier information.  Faced with a mess of supplier details, they had been challenged to efficiently track supplier spend, monitor performance, maintain qualification information or carry out meaningful risk analysis.  Join us on Wednesday to hear how they are addressing these issues and the plans they have to evolve their supplier management techniques - it's a great story.CON9242:  Oracle Supplier Lifecycle Management and Oracle Supplier Hub for Better Supply Base Management Wednesday, October 3rd at 1:15 PM                                                                                                                                                InterContinental Hotel, Sutter Suite

    Read the article

  • Bullet Physics - Casting a ray straight down from a rigid body (first person camera)

    - by Hydrocity
    I've implemented a first person camera using Bullet--it's a rigid body with a capsule shape. I've only been using Bullet for a few days and physics engines are new to me. I use btRigidBody::setLinearVelocity() to move it and it collides perfectly with the world. The only problem is the Y-value moves freely, which I temporarily solved by setting the Y-value of the translation vector to zero before the body is moved. This works for all cases except when falling from a height. When the body drops off a tall object, you can still glide around since the translate vector's Y-value is being set to zero, until you stop moving and fall to the ground (the velocity is only set when moving). So to solve this I would like to try casting a ray down from the body to determine the Y-value of the world, and checking the difference between that value and the Y-value of the camera body, and disable or slow down movement if the difference is large enough. I'm a bit stuck on simply casting a ray and determining the Y-value of the world where it struck. I've implemented this callback: struct AllRayResultCallback : public btCollisionWorld::RayResultCallback{ AllRayResultCallback(const btVector3& rayFromWorld, const btVector3& rayToWorld) : m_rayFromWorld(rayFromWorld), m_rayToWorld(rayToWorld), m_closestHitFraction(1.0){} btVector3 m_rayFromWorld; btVector3 m_rayToWorld; btVector3 m_hitNormalWorld; btVector3 m_hitPointWorld; float m_closestHitFraction; virtual btScalar addSingleResult(btCollisionWorld::LocalRayResult& rayResult, bool normalInWorldSpace) { if(rayResult.m_hitFraction < m_closestHitFraction) m_closestHitFraction = rayResult.m_hitFraction; m_collisionObject = rayResult.m_collisionObject; if(normalInWorldSpace){ m_hitNormalWorld = rayResult.m_hitNormalLocal; } else{ m_hitNormalWorld = m_collisionObject->getWorldTransform().getBasis() * rayResult.m_hitNormalLocal; } m_hitPointWorld.setInterpolate3(m_rayFromWorld, m_rayToWorld, m_closestHitFraction); return 1.0f; } }; And in the movement function, I have this code: btVector3 from(pos.x, pos.y + 1000, pos.z); // pos is the camera's rigid body position btVector3 to(pos.x, 0, pos.z); // not sure if 0 is correct for Y AllRayResultCallback callback(from, to); Base::getSingletonPtr()->m_btWorld->rayTest(from, to, callback); So I have the callback.m_hitPointWorld vector, which seems to just show the position of the camera each frame. I've searched Google for examples of casting rays, as well as the Bullet documentation, and it's been hard to just find an example. An example is really all I need. Or perhaps there is some method in Bullet to keep the rigid body on the ground? I'm using Ogre3D as a rendering engine, and casting a ray down is quite straightforward with that, however I want to keep all the ray casting within Bullet for simplicity. Could anyone point me in the right direction? Thanks.

    Read the article

  • Best Language for the job? Database | C++, .NET, Java

    - by Randy E
    Ok, quick overview. I'm pretty brand new to software design. I have experience reading and editing/customizing PHP things for online scripts/software; Such as CMS, Wordpress, some forum solutions. I'm about to begin my degree in Software Design, the school I'm going to will allow us to kind of focus on an area, C++, Java, or .NET. I've played around a little with VB over the past week, mostly just trying to get a slight feel for it, however nothing extensive. I've been through Herbert Schildt's "C++, A Beginner's Guide." but I was mainly reading it, not doing anything with it beyond a couple basic Console Apps (and getting frustrated with auto-close :/ ). Now, where I decide to focus more in with my degree will depend on what the best language for the job is for my first piece of software I want to develop on my own. Assume I haven't looked at any of the languages at all, please help with the following: My first piece of software will be a database program. Everything has to do with users inputting and retrieving data, and calling that data to help with another function of the software, automatically calculating billing information based on information inputted in the other portion of the program. I won't go into too many details as I'm targeting a niche that doesn't have too much competition, but the competition that is there is established. I want to offer more features, scalable solutions, and the ability to port it to an online version. Ok, basically, it is a complete case management with integrated billing for Private Investigators. I would like the case management to be able to check the Database to see if certain information has been inputted before (such as Names/SSN's), and then the billing will pull hours inputted in the case portion for investigative work, multiplying by an already inputted amount for the fee, and then calculate sales tax. I also want to provide potential clients with an easily scalable solution, that is, a basic option for start ups that costs the least amount, with no additional users, ran on one machine. A middle option with the ability to create users and place them in two groups (User or Admin), as well as adding a few additional features, ran on one machine, but this will allow it to be accessed after being mapped on a network drive. And a third option to allow the placement into 4 different groups (Investigators, Billing, Managers, Admins) and more features. And then, a couple of years after launch, a 4th option that is browser based allowing the same 4 groups to login, as well as clients (view things concerning their case, with some admin customizable objects that can be added for clients view), over the internet. The only licensing security I would like to employ right off the bat will be serial key generated after ordering online (received in an email after the successful purchase). The program will access a database stored on a server periodically to verify license. I would like it to be able to check to make sure it's the most updated version and automatically update if not.

    Read the article

  • Latency Matters

    - by Frederic P
    A lot of interest in low latencies has been expressed within the financial services segment, most especially in the stock trading applications where every millisecond directly influences the profitability of the trader. These days, much of the trading is executed by software applications which are trained to respond to each other almost instantaneously. In fact, you could say that we are in an arms race where traders are using any and all options to cut down on the delay in executing transactions, even by moving physically closer to the trading venue. The Solaris OS network stack has traditionally been engineered for high throughput, at the expense of higher latencies. Knowledge of tuning parameters to redress the imbalance is critical for applications that are latency sensitive. We are presenting in this blog how to configure further a default Oracle Solaris 10 installation to reduce network latency. There are many parameters in fact that can be altered, but the most effective ones are intr_blank_time and intr_blank_packets. These parameters affect on-board network throughput and latency on Solaris systems. If interrupt blanking is disabled, packets are processed by the driver as soon as they arrive, resulting in higher network throughput and lower latency, but with higher CPU utilization. With interrupt blanking disabled, processor utilization can be as high as 80–90% in some high-load web server environments. If interrupt blanking is enabled, packets are processed when the interrupt is issued. Enabling interrupt blanking can result in reduced processor utilization and network throughput, but higher network latency. Both parameters should be set at the same time. You can set these parameters by using the ndd command as follows: # ndd -set /dev/eri intr_blank_time 0 # ndd -set /dev/eri intr_blank_packets 0 You can add them to the /etc/system file as follows: set eri:intr_blank_time 0 set eri:intr_blank_packets 0 The value of the interrupt blanking parameter is a trade-off between network throughput and processor utilization. If higher processor utilization is acceptable for achieving higher network throughput, then disable interrupt blanking. If lower processor utilization is preferred and higher network latency is the penalty, then enable interrupt blanking. Our experience at ISV Engineering is that under controlled experiments the above settings result in reduction of network latency by at least 50%; on a two-socket 3GHz Sun Fire X4170 M2 running Solaris 10 Update 9, the above settings improved ping-pong latency from 60µs to 25-30µs with the on-board NIC.

    Read the article

  • Stuff I learned at Innovate 2011

    - by David Dorf
    After returning from the NRF Innovate 2011 conference, I picked up few nuggets I thought I'd share here.  These thoughts are a bit random, but I hope they're useful nonetheless.Kevin Kelly opened the conference with six verbs that represent the future.  They were Screening, Interacting, Sharing, Accessing, Flowing, and Generating.  It struck me that these are all ways in which we merge the digital and physical worlds.  The internet of things continues to gain momentum.Some buzzwords:  deal economy, subscription commerce, discovery (instead of search), curationThat last one, curation, came up over and over.  Retailers, especially those in fashion, are finding value in helping their customers organize and present their own collections.  Social media has made sharing such collections easy, and mobile lets them take those ideas into the stores.  Mannequins are becoming less relevant.I heard from both HauteLook and Gilt Groupe (flash sale retailers) that a large percentage of their visits come from mobile devices, and most of those are iOS devices.  I find it interesting that even though Android has passed iPhone in units shipped (and will eventually pass iOS as a whole), its still the Apple crowd that leads the way.RadioShack mentioned their Holiday Heroes campaigned was very successful.  They asked their Foursquare users to check-in at a gym, coffee shop, and transportation hub as part of being a hero.  For this feat, customers were awarded a special badge that was worth 20% off at their next store visit. They claim a 3.5x increase in ticket size vs. regular check-in customers, and a 5x increase vs those that don't check-in at all.I also learned of RadioShack's #28 campaign, which is apparently one of the largest Twitter trends ever.  Their partnership with LIVESTRONG has gotten them followers, impressions, and credit for supporting the fight against cancer.The guys at Invodo showed the importance of video to e-commerce.  They gave compelling examples of how video can show customers the value of products better than just words.The highlight of the show was Guy Kawasaki's talk on innovation, which was not only informative but also peppered with humor and personality.  Back in the early days of the internet boom, Guy turned down the CEO position at Yahoo! because the commute was too long.  By his calculation, that was a $2B mistake.There are other good accounts of the conference at the NRF Blog.

    Read the article

  • Oracle HCM Cloud Customer Q&A with WAXIE Sanitary Supply

    - by HCM-Oracle
    At this year’s Oracle HCM User Group (OHUG) Global conference, we had the opportunity to sit down with Oracle HCM Cloud customers for a short Q&A. We got to hear about what brought them to the OHUG conference, some of the benefits they are receiving from their Oracle HCM Cloud solutions, and advice they would give other businesses looking to move to the cloud.  Below is a discussion we had with Melissa Halverson, Benefits & HRIS Manager at WAXIE Sanitary Supply.  Q: What made you attend the OHUG Global Conference this year? Halverson: The biggest reason is networking. It allows me to connect with others in the Oracle HCM Cloud community. I was able to speak at the HCM Cloud SIG (Special Interest Group) on the first day and share my experiences as well as hear the experiences of other Oracle HCM Cloud users. It also allows me to get face-time with key people within Oracle.  Q: What Oracle HCM solutions are you currently using? Halverson: Global HR, Benefits, Workforce Compensation, and Performance Management. Q: Do you plan to invest further in Oracle HCM? Halverson: Yes, we are interested in Time and Labor. We would also like to get Recruiting at some point in the future. Q: What would you say is the most significant benefit you’ve realized from your use of Oracle HCM solutions? Halverson: First and foremost would be process improvement. Before we had Oracle HCM Cloud we relied on a paper process where something as simple as an employee address change required changes to be made manually in 9 different systems. Obviously that was extremely inefficient, but also increased the likelihood of errors being made.  The other huge benefit we have seen was in making information visible to the people that need it. Prior to implementing Oracle HCM Cloud, it was very difficult for anyone to access and make use of the information in our systems. Now, we can provide this information to those who need it to make better decisions.  Q: What advice would you give an organization looking to move their HR systems to the cloud? Halverson: One thing I think many organizations don't spend enough time doing is thoroughly vetting their implementation partner. I believe you should be vetting your implementation partner as much as you did the system itself. Also, manpower is so important. Involve as large a team as possible because you don’t want to get stuck having too few bodies to help out. And set realistic time frames. Biting off more than you can chew will inevitably result in failure. Having a phased approach is always best rather than trying to do everything at once. Thanks for the tips Melissa. Enjoy the rest of the conference!

    Read the article

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >