Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 447/751 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >

• Does RAID negatively affect non-RAID devices?

  - by Django Reinhardt

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to store documents on two HHDs (not SDDs) running under RAID 1. My motherboard has two SATA controllers, both set to AHCI. On the 3GB/s controller, all four ports are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive). Windows is on the 6GB/s controller. Like so: So my question is: If I turn these four ports (on the 3GB/s controller) into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will the HDD or Bluray drive be slower/incompatible with being plugged into a non-AHCI controller? Thanks.

  Read the article

• How to effectively secure a dedicated server for intranet use?

  - by Mark

  I need to secure a dedicated server for intranet use, the server is managed so will have software based security, but what other security should be considered for enterprise level security? The intranet is a host for an ECM (Alfresco) managing and storing sensitive documents. As the information is sensitive we are trying to make it as secure as reasonably possible (requirement in UK law). We plan to encrypt the data on the database. It will be connected to via SSL encryption. Should we consider Hardware firewall, Private lan between the application server and database server?

  Read the article

• Remove dual boot screen

  - by DoubleP90

  some time ago i bought an SSD and since i had to reinstall windows i bought windows 8 with it. I kept windows 7 on my old HDD and i installed Windows 8 on the SSD. For some time i had both, and a dual boot screen would allow me to switch between them. But now i deleted the windows 7 partition and merged it to the partition where i keep all my files, movies etc. But i still have the dual boot screen showing up with windows 8 and windows 7 options. How can i remove the dual boot screen and just make it boot to windows 8?

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• High Availability Clustering and Virtualization

  - by tmcallaghan

  I'm trying to understand how the various virtualization vendors (specifically Amazon EC2, but also VMware and Xen) enable software vendors to provide a real HA solution in the environment where the servers are virtualized. Specifically, if I'm running any HA application (exchange, databases, etc) I need to ensure that my redundant virtual "servers" aren't located on the same physical server. Using in-house virtualization solutions (VMware, Xen, etc) I can provision accordingly as well as check the virtual - physical arrangement. I could, however, accidentally "vmotion" to the same physical hardware. With EC2, I don't even have the ability at provision time to select different physical servers. Since their Cluster Compute Instances are 1 virtual server per physical server it seems to be the only way to guarantee I don't have a false sense of redundancy. Any ideas or thoughts would be helpful. What are others doing about this problem? If the vendors provided an API where I could get something as simple as a unique physical system identifier I could at least know if I'm going to have an issue. -Tim

  Read the article

• What kind of website traffic can a 10mpbs connection handle?

  - by Blankman

  I need some help understanding firewalls. I played around with Amazon EC2 and it seems to provide a firewall out-of-the-box. When I say firewall, to me that means the ability to block ports from being accessed from the outside world, or to only specific security groups. I'm looking at a dedicated server hosting provider and they provide a hardware firewall for $50/month and it is limited to 10mbps. Can someone explain to me what kind of traffic this correlates to? Are these usually limited to the number of simultaneous connections also?

  Read the article

• Can a RAID disk setup crash if only 1 hard disk fails?

  - by Steve Rodrigue

  I am a web developer. I have not much experience in hardware. For this reason, I use managed servers. This morning, one of the drives in our setup failed. However, the full site went down. I asked my web host what happened and he replied that the hard disk failed in such a way that the RAID controller couldn't work properly. Do you guys ever seen that before? Is it possible? Thanks for any help on this guys. I need to know if my web host is honest with me. Steve

  Read the article

• Apache not serving pages stored in Subversion repository

  - by Stephen

  I've setup Apache and Subversion on an old PC, but Apache is not serving pages correctly, when I enter the address to my test site: http://HOME_IP_ADDRESS/test/index.html I just get a File Not Found error and the following output in the error log: File does not exist: /var/www/html/svn/repos/test but I know the file exists, when I enter the following URL into the browser: http://HOME_IP_ADDRESS/repos/test/index.html I just get a listing of the HTML. In my Apache config file I have the Document Root set as follows: DocumentRoot "/var/www/html/svn/repos" so I'm not sure what is going on, I have SVN installed and I think it may have something to do this. Edit * I changed the Document Root location, which helped as pages in the new location were served correctly, so the problem is with just serving the pages from the repository.

  Read the article

• EC2 Image to start

  - by HD.

  I'm starting to test EC2 for a couple of new projects. I need to choose an AMI (Amazon Machine Image) and Amazon offered me as first option Fedora Core 8, which is a very old version of one of my favorites distributions. There is a lot of choices, but it's not clear for me which one is the better option. I have my own reasons in order to choice a distro and a version when I need to install a new server but I don't know If I can apply the same for EC2. I know there is a beta for RHEL, how stable is this beta?, How can I choose between all the CentOS AMIs in the list? So this is my question: Do you recommend an AMI to start with EC2? Thanks

  Read the article

• Graphics card for dual 2560 x 1440 output

  - by Bender

  As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

  Read the article

• nginx redirects and rewrites

  - by ptheofan

  I'm closing a website but want to maintain a couple of urls working plus a static html file to serve as index. All old urls should redirect to root (/) except a couple of chosen locations. Here's an example of what I need to do All should give 301 permanent to / http:://www.domain.tld/whatever/anything/realy == 301 ==> http://www.domain.tld http:://www.domain.tld/blabla == 301 ==> http://www.domain.tld http:://www.domain.tld/ == 301 ==> http://www.domain.tld except for http://www.domain.tld/special.html == serve ==> special.html root should serve the defailt file (as specificed in index) http:://www.domain.tld == serve => somefile.html

  Read the article

• Can't boot Windows after installing Linux

  - by user4035

  I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sdb2 label = Linux read-only # Partitions should be mounted read-only for checking # Linux bootable partition config ends # Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends What can be wrong?

  Read the article

• What are my options for a disk with what seems to be a corrupted filesystem?

  - by CT

  I have a friend with an old Dell that will not boot into Windows. It has an IDE drive. It spins up. I have an IDE to USB device. I've attached the drive via that device to a working laptop. The drive does not mount. If I go into Disk Management I can see the drive but it will not initalize, says "Drive not ready." I've also booted into a linux live cd to see if the drive mounts, it does not. I am just trying to recover some pictures from the drive. The data is not important enough to send to a professional. The issue is more of a curosity on how to recover data if and when these situations would occur in the future.

  Read the article

• How to set up an extended desktop on dual monitors in Kubuntu 9.04?

  - by Dennis

  I'm using my laptop (Lenovo Thinkpad T60) and I have a secondary monitor (which has a different resolution than my laptop screen) connected by VGA. Kubuntu recognizes the monitor and it functions but my desktop is mirrored (i.e. an identical copy) across the dual monitors (which is useless to me). How can I extend my desktop across both monitors? P.S. I googled it but the solutions I found weren't standard, they were hardware specific and you had to manually change system files, etc.. There must be an easier way. edit: Here is a snapshot of the settings.

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7 to work? [closed]

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• Slow running Ubuntu 10.10 laptop

  - by user5978

  Hello everyone. I have a slow computer. When I click on an icon say Firefox it can take 10 seconds to load. when I minimize and maximize windows you can see it happening. I get "ghost" screens where you see the window outline of the box but nothing in it or it may be white. The laptop is two years old and has these specs: Intel core two duo 2.8GHZ CPU 4GB RAM 500GB HDD 512MB Nvidia 8600GT video Realtek HD audio What is going on and where should I start looking for issues? Ubuntu 10.10 was upgraded from 10.04LTS following the instructions from the Ubuntu Wiki and it was done through the update manager GUI, not the CLI. Thanks for the help.

  Read the article

• Different behaviour of script locally and over ssh

  - by neorg

  I have a script on a server-A Script-A #!/bin/bash -l echo "script-A.sh" | change-environment.sh When I ssh onto server-A and execute it, it works fine. However, when I ssh user@server-A ./script-A.sh Script-A executes, but throws an undefined variable error in change-environment.sh. change-environment.sh runs in the c shell(I have no control over the script so the method I have used is about the only way I can use it), but everything else is in bash. Had found a similar question at I can run a script locally, but cannot do "ssh HOSTNAME /path/to/script.sh". However, there was no solution to the issue and it was a year old.

  Read the article

• Is there a fix for an iMac G5 annoying screen pattern issue?

  - by smountcastle

  It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

  Read the article

• How to maintain VPS server?

  - by clorz

  Assuming I have no experience in running them, what would be called a good maintenance routine for a VPS server running mail server and LAMP with a couple of sites. I've got one for quite a while now, but was doing what I feel is right without any guidance. It's ubuntu server and the only thing I do is ssh in there once a month and apt-get update, apt-get upgrade. Last year it suggested to update the distro, which I did. Waded through a bunch of diffs, broke mail server in the process and fixed it later on. So it turned out fine. Was this a right thing to do or should I stick with the old version just updating the packages? Is there a difference in the routine if it will be Fedora?

  Read the article

• Is it possible to make a (Windows 7) executable automatically run when I put in my thumb drive?

  - by iconoclast

  I have portable apps on a thumbdrive, and want to automatically run the "menu" app (E:\Applications\Windows\Start.exe) when I insert that drive. I realize (or think I realize, based on a foggy memory of trying to find a way to do this some time ago) that it can no longer be done with the old autorun approach, at least not in Windows 7. But there must be some other way: maybe a daemon process that waits for the thumbdrive to be inserted, and then fires up the .exe file? Maybe a daemon that tries every five minutes or so to launch the menu, and doesn't make a fuss when it's not there. Maybe something else? How can I achieve this?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• BIOS recognizes HD, but Ubuntu doesn't recognize it as partition

  - by user23792

  Hello, I just stuck in a new 64 GB SSD (literally out of the box) into my Lenovo X61 laptop, replacing an old 5400 RPM 80 GB drive. When I boot the system, my motherboard successfully sees the SATA hard drive. Now I want to install Ubuntu on it. I stick it in the CD drive, bootup the system, and it gets to step 4 (choose partition), but sees no available partitions. Do I need to do something to the hard drive before installing Ubuntu? Many thanks.

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Getting the keyboard working on a MacBook under Windows XP x64

  - by Theran

  Despite Windows XP Professional x64's unsupported status on MacBooks (model A1181), I've managed to get most of the hardware working by manually installing either the drivers on the OS X Snow Leopard CD, or finding the appropriate drivers online. However, even after installing the Apple keyboard driver from the CD, I can't get Windows to actually use the special driver. Instead, the keyboard just shows up as a generic USB keyboard, with non-functioning Fn and other special keys. Being unable to generate a right-click or Ctrl-Alt-Del makes Windows a bit of a challenge to use. I've tried: uninstalling and reinstalling the keyboard driver removing the keyboard under device manager and letting Windows re-detect it using device manager to manually update the driver How do I get the special functions of the MacBook keyboard working under XP x64?

  Read the article

• Can I lvreduce after lvextend without losing the ext4 partition inside it?

  - by DrSAR

  In a botched attempt to move my root partition from one disk to another I have done the following: added new disk partitioned it with parted (part #3 is now almost totally filling the disk) initialized a physical volume $ pvcreate /dev/sdb3 Physical volume "/dev/sdb3" successfully created extended the volume group to include this new physical disk $ vgextend myvg /dev/sdb3 Volume group "myvg" successfully extended extended the logical volume (I think this is where I ballsed it up: I think I should have pvmove'ed stuff to the new pv in that group - can someone confirm?) $ lvextend /dev/mapper/myvg-root /dev/sdb3 I would now like to undo the lvextend and then proceed with the original plan of moving the content of the old physical volume over to the new physical volume. Can I reduce the logical volume (I have not yet touched the ext4 partition that sits in /dev/mapper/myvg-root with something like resizefs) without fear of damaging the ext4 filesystem? If so, how do I tell it to reduce by exactly the right amount? $ lvreduce --by-exactly-the-amount-occupied-by-PV /ev/sdb3 /dev/mapper/myvg-root

  Read the article

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >